DPDK patches and discussions
 help / color / Atom feed
From: Timothy McDaniel <timothy.mcdaniel@intel.com>
Cc: dev@dpdk.org, erik.g.carrillo@intel.com, gage.eads@intel.com,
	harry.van.haaren@intel.com, jerinj@marvell.com
Subject: [dpdk-dev] [PATCH 10/22] event/dlb2: add queue setup
Date: Fri, 11 Sep 2020 15:26:15 -0500
Message-ID: <1599855987-25976-11-git-send-email-timothy.mcdaniel@intel.com> (raw)
In-Reply-To: <1599855987-25976-1-git-send-email-timothy.mcdaniel@intel.com>

Load balanced (ldb) queues are setup here.
Directed queues are not set up until link time, at which
point we know the directed port ID. Directed queue setup
will only fail if this queue is already setup or there are
no directed queues left to configure.

Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
---
 drivers/event/dlb2/dlb2.c                  | 316 ++++++++++++++++++++
 drivers/event/dlb2/dlb2_iface.c            |  12 +
 drivers/event/dlb2/dlb2_iface.h            |  12 +
 drivers/event/dlb2/pf/base/dlb2_resource.c | 464 +++++++++++++++++++++++++++++
 drivers/event/dlb2/pf/dlb2_main.c          |  10 +
 drivers/event/dlb2/pf/dlb2_pf.c            |  82 +++++
 6 files changed, 896 insertions(+)

diff --git a/drivers/event/dlb2/dlb2.c b/drivers/event/dlb2/dlb2.c
index 9ff371a..366e194 100644
--- a/drivers/event/dlb2/dlb2.c
+++ b/drivers/event/dlb2/dlb2.c
@@ -728,6 +728,321 @@ dlb2_eventdev_queue_default_conf_get(struct rte_eventdev *dev,
 	queue_conf->priority = 0;
 }
 
+static int32_t
+dlb2_get_sn_allocation(struct dlb2_eventdev *dlb2, int group)
+{
+	struct dlb2_hw_dev *handle = &dlb2->qm_instance;
+	struct dlb2_get_sn_allocation_args cfg;
+	int ret;
+
+	cfg.group = group;
+
+	ret = dlb2_iface_get_sn_allocation(handle, &cfg);
+	if (ret < 0) {
+		DLB2_LOG_ERR("dlb2: get_sn_allocation ret=%d (driver status: %s)\n",
+			     ret, dlb2_error_strings[cfg.response.status]);
+		return ret;
+	}
+
+	return cfg.response.id;
+}
+
+static int
+dlb2_set_sn_allocation(struct dlb2_eventdev *dlb2, int group, int num)
+{
+	struct dlb2_hw_dev *handle = &dlb2->qm_instance;
+	struct dlb2_set_sn_allocation_args cfg;
+	int ret;
+
+	cfg.num = num;
+	cfg.group = group;
+
+	ret = dlb2_iface_set_sn_allocation(handle, &cfg);
+	if (ret < 0) {
+		DLB2_LOG_ERR("dlb2: set_sn_allocation ret=%d (driver status: %s)\n",
+			     ret, dlb2_error_strings[cfg.response.status]);
+		return ret;
+	}
+
+	return ret;
+}
+
+static int32_t
+dlb2_get_sn_occupancy(struct dlb2_eventdev *dlb2, int group)
+{
+	struct dlb2_hw_dev *handle = &dlb2->qm_instance;
+	struct dlb2_get_sn_occupancy_args cfg;
+	int ret;
+
+	cfg.group = group;
+
+	ret = dlb2_iface_get_sn_occupancy(handle, &cfg);
+	if (ret < 0) {
+		DLB2_LOG_ERR("dlb2: get_sn_occupancy ret=%d (driver status: %s)\n",
+			     ret, dlb2_error_strings[cfg.response.status]);
+		return ret;
+	}
+
+	return cfg.response.id;
+}
+
+/* Query the current sequence number allocations and, if they conflict with the
+ * requested LDB queue configuration, attempt to re-allocate sequence numbers.
+ * This is best-effort; if it fails, the PMD will attempt to configure the
+ * load-balanced queue and return an error.
+ */
+static void
+dlb2_program_sn_allocation(struct dlb2_eventdev *dlb2,
+			   const struct rte_event_queue_conf *queue_conf)
+{
+	int grp_occupancy[DLB2_NUM_SN_GROUPS];
+	int grp_alloc[DLB2_NUM_SN_GROUPS];
+	int i, sequence_numbers;
+
+	sequence_numbers = (int)queue_conf->nb_atomic_order_sequences;
+
+	for (i = 0; i < DLB2_NUM_SN_GROUPS; i++) {
+		int total_slots;
+
+		grp_alloc[i] = dlb2_get_sn_allocation(dlb2, i);
+		if (grp_alloc[i] < 0)
+			return;
+
+		total_slots = DLB2_MAX_LDB_SN_ALLOC / grp_alloc[i];
+
+		grp_occupancy[i] = dlb2_get_sn_occupancy(dlb2, i);
+		if (grp_occupancy[i] < 0)
+			return;
+
+		/* DLB has at least one available slot for the requested
+		 * sequence numbers, so no further configuration required.
+		 */
+		if (grp_alloc[i] == sequence_numbers &&
+		    grp_occupancy[i] < total_slots)
+			return;
+	}
+
+	/* None of the sequence number groups are configured for the requested
+	 * sequence numbers, so we have to reconfigure one of them. This is
+	 * only possible if a group is not in use.
+	 */
+	for (i = 0; i < DLB2_NUM_SN_GROUPS; i++) {
+		if (grp_occupancy[i] == 0)
+			break;
+	}
+
+	if (i == DLB2_NUM_SN_GROUPS) {
+		printf("[%s()] No groups with %d sequence_numbers are available or have free slots\n",
+		       __func__, sequence_numbers);
+		return;
+	}
+
+	/* Attempt to configure slot i with the requested number of sequence
+	 * numbers. Ignore the return value -- if this fails, the error will be
+	 * caught during subsequent queue configuration.
+	 */
+	dlb2_set_sn_allocation(dlb2, i, sequence_numbers);
+}
+
+static int32_t
+dlb2_hw_create_ldb_queue(struct dlb2_eventdev *dlb2,
+			 struct dlb2_eventdev_queue *ev_queue,
+			 const struct rte_event_queue_conf *evq_conf)
+{
+	struct dlb2_hw_dev *handle = &dlb2->qm_instance;
+	struct dlb2_queue *queue = &ev_queue->qm_queue;
+	struct dlb2_create_ldb_queue_args cfg;
+	int32_t ret;
+	uint32_t qm_qid;
+	int sched_type = -1;
+
+	if (evq_conf == NULL)
+		return -EINVAL;
+
+	if (evq_conf->event_queue_cfg & RTE_EVENT_QUEUE_CFG_ALL_TYPES) {
+		if (evq_conf->nb_atomic_order_sequences != 0)
+			sched_type = RTE_SCHED_TYPE_ORDERED;
+		else
+			sched_type = RTE_SCHED_TYPE_PARALLEL;
+	} else {
+		sched_type = evq_conf->schedule_type;
+	}
+
+	cfg.num_atomic_inflights = DLB2_NUM_ATOMIC_INFLIGHTS_PER_QUEUE;
+	cfg.num_sequence_numbers = evq_conf->nb_atomic_order_sequences;
+	cfg.num_qid_inflights = evq_conf->nb_atomic_order_sequences;
+
+	if (sched_type != RTE_SCHED_TYPE_ORDERED) {
+		cfg.num_sequence_numbers = 0;
+		cfg.num_qid_inflights = 2048;
+	}
+
+	/* App should set this to the number of hardware flows they want, not
+	 * the overall number of flows they're going to use. E.g. if app is
+	 * using 64 flows and sets compression to 64, best-case they'll get
+	 * 64 unique hashed flows in hardware.
+	 */
+	switch (evq_conf->nb_atomic_flows) {
+	/* Valid DLB2 compression levels */
+	case 64:
+	case 128:
+	case 256:
+	case 512:
+	case (1 * 1024): /* 1K */
+	case (2 * 1024): /* 2K */
+	case (4 * 1024): /* 4K */
+	case (64 * 1024): /* 64K */
+		cfg.lock_id_comp_level = evq_conf->nb_atomic_flows;
+		break;
+	default:
+		/* Invalid compression level */
+		cfg.lock_id_comp_level = 0; /* no compression */
+	}
+
+	if (ev_queue->depth_threshold == 0) {
+		cfg.depth_threshold = RTE_PMD_DLB2_DEFAULT_DEPTH_THRESH;
+		ev_queue->depth_threshold = RTE_PMD_DLB2_DEFAULT_DEPTH_THRESH;
+	} else {
+		cfg.depth_threshold = ev_queue->depth_threshold;
+	}
+
+	ret = dlb2_iface_ldb_queue_create(handle, &cfg);
+	if (ret < 0) {
+		DLB2_LOG_ERR("dlb2: create LB event queue error, ret=%d (driver status: %s)\n",
+			     ret, dlb2_error_strings[cfg.response.status]);
+		return -EINVAL;
+	}
+
+	qm_qid = cfg.response.id;
+
+	/* Save off queue config for debug, resource lookups, and reconfig */
+	queue->num_qid_inflights = cfg.num_qid_inflights;
+	queue->num_atm_inflights = cfg.num_atomic_inflights;
+
+	queue->sched_type = sched_type;
+	queue->config_state = DLB2_CONFIGURED;
+
+	DLB2_LOG_DBG("Created LB event queue %d, nb_inflights=%d, nb_seq=%d, qid inflights=%d\n",
+		     qm_qid,
+		     cfg.num_atomic_inflights,
+		     cfg.num_sequence_numbers,
+		     cfg.num_qid_inflights);
+
+	return qm_qid;
+}
+
+static int
+dlb2_eventdev_ldb_queue_setup(struct rte_eventdev *dev,
+			      struct dlb2_eventdev_queue *ev_queue,
+			      const struct rte_event_queue_conf *queue_conf)
+{
+	struct dlb2_eventdev *dlb2 = dlb2_pmd_priv(dev);
+	int32_t qm_qid;
+
+	if (queue_conf->nb_atomic_order_sequences)
+		dlb2_program_sn_allocation(dlb2, queue_conf);
+
+	qm_qid = dlb2_hw_create_ldb_queue(dlb2,
+					  ev_queue,
+					  queue_conf);
+	if (qm_qid < 0) {
+		DLB2_LOG_ERR("Failed to create the load-balanced queue\n");
+
+		return qm_qid;
+	}
+
+	dlb2->qm_ldb_to_ev_queue_id[qm_qid] = ev_queue->id;
+
+	ev_queue->qm_queue.id = qm_qid;
+
+	return 0;
+}
+
+static int dlb2_num_dir_queues_setup(struct dlb2_eventdev *dlb2)
+{
+	int i, num = 0;
+
+	for (i = 0; i < dlb2->num_queues; i++) {
+		if (dlb2->ev_queues[i].setup_done &&
+		    dlb2->ev_queues[i].qm_queue.is_directed)
+			num++;
+	}
+
+	return num;
+}
+
+static void
+dlb2_queue_link_teardown(struct dlb2_eventdev *dlb2,
+			 struct dlb2_eventdev_queue *ev_queue)
+{
+	struct dlb2_eventdev_port *ev_port;
+	int i, j;
+
+	for (i = 0; i < dlb2->num_ports; i++) {
+		ev_port = &dlb2->ev_ports[i];
+
+		for (j = 0; j < DLB2_MAX_NUM_QIDS_PER_LDB_CQ; j++) {
+			if (!ev_port->link[j].valid ||
+			    ev_port->link[j].queue_id != ev_queue->id)
+				continue;
+
+			ev_port->link[j].valid = false;
+			ev_port->num_links--;
+		}
+	}
+
+	ev_queue->num_links = 0;
+}
+
+static int
+dlb2_eventdev_queue_setup(struct rte_eventdev *dev,
+			  uint8_t ev_qid,
+			  const struct rte_event_queue_conf *queue_conf)
+{
+	struct dlb2_eventdev *dlb2 = dlb2_pmd_priv(dev);
+	struct dlb2_eventdev_queue *ev_queue;
+	int ret;
+
+	if (!queue_conf)
+		return -EINVAL;
+
+	if (ev_qid >= dlb2->num_queues)
+		return -EINVAL;
+
+	ev_queue = &dlb2->ev_queues[ev_qid];
+
+	ev_queue->qm_queue.is_directed = queue_conf->event_queue_cfg &
+		RTE_EVENT_QUEUE_CFG_SINGLE_LINK;
+	ev_queue->id = ev_qid;
+	ev_queue->conf = *queue_conf;
+
+	if (!ev_queue->qm_queue.is_directed) {
+		ret = dlb2_eventdev_ldb_queue_setup(dev, ev_queue, queue_conf);
+	} else {
+		/* The directed queue isn't setup until link time, at which
+		 * point we know its directed port ID. Directed queue setup
+		 * will only fail if this queue is already setup or there are
+		 * no directed queues left to configure.
+		 */
+		ret = 0;
+
+		ev_queue->qm_queue.config_state = DLB2_NOT_CONFIGURED;
+
+		if (ev_queue->setup_done ||
+		    dlb2_num_dir_queues_setup(dlb2) == dlb2->num_dir_queues)
+			ret = -EINVAL;
+	}
+
+	/* Tear down pre-existing port->queue links */
+	if (!ret && dlb2->run_state == DLB2_RUN_STATE_STOPPED)
+		dlb2_queue_link_teardown(dlb2, ev_queue);
+
+	if (!ret)
+		ev_queue->setup_done = true;
+
+	return ret;
+}
+
 static void
 dlb2_entry_points_init(struct rte_eventdev *dev)
 {
@@ -736,6 +1051,7 @@ dlb2_entry_points_init(struct rte_eventdev *dev)
 		.dev_infos_get    = dlb2_eventdev_info_get,
 		.dev_configure    = dlb2_eventdev_configure,
 		.queue_def_conf   = dlb2_eventdev_queue_default_conf_get,
+		.queue_setup      = dlb2_eventdev_queue_setup,
 		.port_def_conf    = dlb2_eventdev_port_default_conf_get,
 		.dump             = dlb2_eventdev_dump,
 		.xstats_get       = dlb2_eventdev_xstats_get,
diff --git a/drivers/event/dlb2/dlb2_iface.c b/drivers/event/dlb2/dlb2_iface.c
index 5c11736..f50a918 100644
--- a/drivers/event/dlb2/dlb2_iface.c
+++ b/drivers/event/dlb2/dlb2_iface.c
@@ -45,3 +45,15 @@ int (*dlb2_iface_sched_domain_create)(struct dlb2_hw_dev *handle,
 				struct dlb2_create_sched_domain_args *args);
 
 void (*dlb2_iface_domain_reset)(struct dlb2_eventdev *dlb2);
+
+int (*dlb2_iface_ldb_queue_create)(struct dlb2_hw_dev *handle,
+				   struct dlb2_create_ldb_queue_args *cfg);
+
+int (*dlb2_iface_get_sn_allocation)(struct dlb2_hw_dev *handle,
+				    struct dlb2_get_sn_allocation_args *args);
+
+int (*dlb2_iface_set_sn_allocation)(struct dlb2_hw_dev *handle,
+				    struct dlb2_set_sn_allocation_args *args);
+
+int (*dlb2_iface_get_sn_occupancy)(struct dlb2_hw_dev *handle,
+				   struct dlb2_get_sn_occupancy_args *args);
diff --git a/drivers/event/dlb2/dlb2_iface.h b/drivers/event/dlb2/dlb2_iface.h
index 576c1c3..c1ef7c2 100644
--- a/drivers/event/dlb2/dlb2_iface.h
+++ b/drivers/event/dlb2/dlb2_iface.h
@@ -31,4 +31,16 @@ extern int (*dlb2_iface_sched_domain_create)(struct dlb2_hw_dev *handle,
 
 extern void (*dlb2_iface_domain_reset)(struct dlb2_eventdev *dlb2);
 
+extern int (*dlb2_iface_ldb_queue_create)(struct dlb2_hw_dev *handle,
+				  struct dlb2_create_ldb_queue_args *cfg);
+
+extern int (*dlb2_iface_get_sn_allocation)(struct dlb2_hw_dev *handle,
+				   struct dlb2_get_sn_allocation_args *args);
+
+extern int (*dlb2_iface_set_sn_allocation)(struct dlb2_hw_dev *handle,
+				   struct dlb2_set_sn_allocation_args *args);
+
+extern int (*dlb2_iface_get_sn_occupancy)(struct dlb2_hw_dev *handle,
+				  struct dlb2_get_sn_occupancy_args *args);
+
 #endif /* _DLB2_IFACE_H_ */
diff --git a/drivers/event/dlb2/pf/base/dlb2_resource.c b/drivers/event/dlb2/pf/base/dlb2_resource.c
index f83f8a1..dc9d19a 100644
--- a/drivers/event/dlb2/pf/base/dlb2_resource.c
+++ b/drivers/event/dlb2/pf/base/dlb2_resource.c
@@ -3506,3 +3506,467 @@ unsigned int dlb2_finish_map_qid_procedures(struct dlb2_hw *hw)
 
 	return num;
 }
+
+
+static void dlb2_configure_ldb_queue(struct dlb2_hw *hw,
+				     struct dlb2_hw_domain *domain,
+				     struct dlb2_ldb_queue *queue,
+				     struct dlb2_create_ldb_queue_args *args,
+				     bool vdev_req,
+				     unsigned int vdev_id)
+{
+	union dlb2_sys_vf_ldb_vqid_v r0 = { {0} };
+	union dlb2_sys_vf_ldb_vqid2qid r1 = { {0} };
+	union dlb2_sys_ldb_qid2vqid r2 = { {0} };
+	union dlb2_sys_ldb_vasqid_v r3 = { {0} };
+	union dlb2_lsp_qid_ldb_infl_lim r4 = { {0} };
+	union dlb2_lsp_qid_aqed_active_lim r5 = { {0} };
+	union dlb2_aqed_pipe_qid_hid_width r6 = { {0} };
+	union dlb2_sys_ldb_qid_its r7 = { {0} };
+	union dlb2_lsp_qid_atm_depth_thrsh r8 = { {0} };
+	union dlb2_lsp_qid_naldb_depth_thrsh r9 = { {0} };
+	union dlb2_aqed_pipe_qid_fid_lim r10 = { {0} };
+	union dlb2_chp_ord_qid_sn_map r11 = { {0} };
+	union dlb2_sys_ldb_qid_cfg_v r12 = { {0} };
+	union dlb2_sys_ldb_qid_v r13 = { {0} };
+
+	struct dlb2_sn_group *sn_group;
+	unsigned int offs;
+
+	/* QID write permissions are turned on when the domain is started */
+	r3.field.vasqid_v = 0;
+
+	offs = domain->id.phys_id * DLB2_MAX_NUM_LDB_QUEUES +
+		queue->id.phys_id;
+
+	DLB2_CSR_WR(hw, DLB2_SYS_LDB_VASQID_V(offs), r3.val);
+
+	/*
+	 * Unordered QIDs get 4K inflights, ordered get as many as the number
+	 * of sequence numbers.
+	 */
+	r4.field.limit = args->num_qid_inflights;
+
+	DLB2_CSR_WR(hw, DLB2_LSP_QID_LDB_INFL_LIM(queue->id.phys_id), r4.val);
+
+	r5.field.limit = queue->aqed_limit;
+
+	if (r5.field.limit > DLB2_MAX_NUM_AQED_ENTRIES)
+		r5.field.limit = DLB2_MAX_NUM_AQED_ENTRIES;
+
+	DLB2_CSR_WR(hw,
+		    DLB2_LSP_QID_AQED_ACTIVE_LIM(queue->id.phys_id),
+		    r5.val);
+
+	switch (args->lock_id_comp_level) {
+	case 64:
+		r6.field.compress_code = 1;
+		break;
+	case 128:
+		r6.field.compress_code = 2;
+		break;
+	case 256:
+		r6.field.compress_code = 3;
+		break;
+	case 512:
+		r6.field.compress_code = 4;
+		break;
+	case 1024:
+		r6.field.compress_code = 5;
+		break;
+	case 2048:
+		r6.field.compress_code = 6;
+		break;
+	case 4096:
+		r6.field.compress_code = 7;
+		break;
+	case 0:
+	case 65536:
+		r6.field.compress_code = 0;
+	}
+
+	DLB2_CSR_WR(hw,
+		    DLB2_AQED_PIPE_QID_HID_WIDTH(queue->id.phys_id),
+		    r6.val);
+
+	/* Don't timestamp QEs that pass through this queue */
+	r7.field.qid_its = 0;
+
+	DLB2_CSR_WR(hw,
+		    DLB2_SYS_LDB_QID_ITS(queue->id.phys_id),
+		    r7.val);
+
+	r8.field.thresh = args->depth_threshold;
+
+	DLB2_CSR_WR(hw,
+		    DLB2_LSP_QID_ATM_DEPTH_THRSH(queue->id.phys_id),
+		    r8.val);
+
+	r9.field.thresh = args->depth_threshold;
+
+	DLB2_CSR_WR(hw,
+		    DLB2_LSP_QID_NALDB_DEPTH_THRSH(queue->id.phys_id),
+		    r9.val);
+
+	/*
+	 * This register limits the number of inflight flows a queue can have
+	 * at one time.  It has an upper bound of 2048, but can be
+	 * over-subscribed. 512 is chosen so that a single queue doesn't use
+	 * the entire atomic storage, but can use a substantial portion if
+	 * needed.
+	 */
+	r10.field.qid_fid_limit = 512;
+
+	DLB2_CSR_WR(hw,
+		    DLB2_AQED_PIPE_QID_FID_LIM(queue->id.phys_id),
+		    r10.val);
+
+	/* Configure SNs */
+	sn_group = &hw->rsrcs.sn_groups[queue->sn_group];
+	r11.field.mode = sn_group->mode;
+	r11.field.slot = queue->sn_slot;
+	r11.field.grp  = sn_group->id;
+
+	DLB2_CSR_WR(hw, DLB2_CHP_ORD_QID_SN_MAP(queue->id.phys_id), r11.val);
+
+	r12.field.sn_cfg_v = (args->num_sequence_numbers != 0);
+	r12.field.fid_cfg_v = (args->num_atomic_inflights != 0);
+
+	DLB2_CSR_WR(hw, DLB2_SYS_LDB_QID_CFG_V(queue->id.phys_id), r12.val);
+
+	if (vdev_req) {
+		offs = vdev_id * DLB2_MAX_NUM_LDB_QUEUES + queue->id.virt_id;
+
+		r0.field.vqid_v = 1;
+
+		DLB2_CSR_WR(hw, DLB2_SYS_VF_LDB_VQID_V(offs), r0.val);
+
+		r1.field.qid = queue->id.phys_id;
+
+		DLB2_CSR_WR(hw, DLB2_SYS_VF_LDB_VQID2QID(offs), r1.val);
+
+		r2.field.vqid = queue->id.virt_id;
+
+		DLB2_CSR_WR(hw,
+			    DLB2_SYS_LDB_QID2VQID(queue->id.phys_id),
+			    r2.val);
+	}
+
+	r13.field.qid_v = 1;
+
+	DLB2_CSR_WR(hw, DLB2_SYS_LDB_QID_V(queue->id.phys_id), r13.val);
+}
+
+static int
+dlb2_ldb_queue_attach_to_sn_group(struct dlb2_hw *hw,
+				  struct dlb2_ldb_queue *queue,
+				  struct dlb2_create_ldb_queue_args *args)
+{
+	int slot = -1;
+	int i;
+
+	queue->sn_cfg_valid = false;
+
+	if (args->num_sequence_numbers == 0)
+		return 0;
+
+	for (i = 0; i < DLB2_MAX_NUM_SEQUENCE_NUMBER_GROUPS; i++) {
+		struct dlb2_sn_group *group = &hw->rsrcs.sn_groups[i];
+
+		if (group->sequence_numbers_per_queue ==
+		    args->num_sequence_numbers &&
+		    !dlb2_sn_group_full(group)) {
+			slot = dlb2_sn_group_alloc_slot(group);
+			if (slot >= 0)
+				break;
+		}
+	}
+
+	if (slot == -1) {
+		DLB2_HW_ERR(hw,
+			    "[%s():%d] Internal error: no sequence number slots available\n",
+			    __func__, __LINE__);
+		return -EFAULT;
+	}
+
+	queue->sn_cfg_valid = true;
+	queue->sn_group = i;
+	queue->sn_slot = slot;
+	return 0;
+}
+
+static int
+dlb2_ldb_queue_attach_resources(struct dlb2_hw *hw,
+				struct dlb2_hw_domain *domain,
+				struct dlb2_ldb_queue *queue,
+				struct dlb2_create_ldb_queue_args *args)
+{
+	int ret;
+
+	ret = dlb2_ldb_queue_attach_to_sn_group(hw, queue, args);
+	if (ret)
+		return ret;
+
+	/* Attach QID inflights */
+	queue->num_qid_inflights = args->num_qid_inflights;
+
+	/* Attach atomic inflights */
+	queue->aqed_limit = args->num_atomic_inflights;
+
+	domain->num_avail_aqed_entries -= args->num_atomic_inflights;
+	domain->num_used_aqed_entries += args->num_atomic_inflights;
+
+	return 0;
+}
+
+static int
+dlb2_verify_create_ldb_queue_args(struct dlb2_hw *hw,
+				  u32 domain_id,
+				  struct dlb2_create_ldb_queue_args *args,
+				  struct dlb2_cmd_response *resp,
+				  bool vdev_req,
+				  unsigned int vdev_id)
+{
+	struct dlb2_hw_domain *domain;
+	int i;
+
+	domain = dlb2_get_domain_from_id(hw, domain_id, vdev_req, vdev_id);
+
+	if (!domain) {
+		resp->status = DLB2_ST_INVALID_DOMAIN_ID;
+		return -EINVAL;
+	}
+
+	if (!domain->configured) {
+		resp->status = DLB2_ST_DOMAIN_NOT_CONFIGURED;
+		return -EINVAL;
+	}
+
+	if (domain->started) {
+		resp->status = DLB2_ST_DOMAIN_STARTED;
+		return -EINVAL;
+	}
+
+	if (dlb2_list_empty(&domain->avail_ldb_queues)) {
+		resp->status = DLB2_ST_LDB_QUEUES_UNAVAILABLE;
+		return -EINVAL;
+	}
+
+	if (args->num_sequence_numbers) {
+		for (i = 0; i < DLB2_MAX_NUM_SEQUENCE_NUMBER_GROUPS; i++) {
+			struct dlb2_sn_group *group = &hw->rsrcs.sn_groups[i];
+
+			if (group->sequence_numbers_per_queue ==
+			    args->num_sequence_numbers &&
+			    !dlb2_sn_group_full(group))
+				break;
+		}
+
+		if (i == DLB2_MAX_NUM_SEQUENCE_NUMBER_GROUPS) {
+			resp->status = DLB2_ST_SEQUENCE_NUMBERS_UNAVAILABLE;
+			return -EINVAL;
+		}
+	}
+
+	if (args->num_qid_inflights > 4096) {
+		resp->status = DLB2_ST_INVALID_QID_INFLIGHT_ALLOCATION;
+		return -EINVAL;
+	}
+
+	/* Inflights must be <= number of sequence numbers if ordered */
+	if (args->num_sequence_numbers != 0 &&
+	    args->num_qid_inflights > args->num_sequence_numbers) {
+		resp->status = DLB2_ST_INVALID_QID_INFLIGHT_ALLOCATION;
+		return -EINVAL;
+	}
+
+	if (domain->num_avail_aqed_entries < args->num_atomic_inflights) {
+		resp->status = DLB2_ST_ATOMIC_INFLIGHTS_UNAVAILABLE;
+		return -EINVAL;
+	}
+
+	if (args->num_atomic_inflights &&
+	    args->lock_id_comp_level != 0 &&
+	    args->lock_id_comp_level != 64 &&
+	    args->lock_id_comp_level != 128 &&
+	    args->lock_id_comp_level != 256 &&
+	    args->lock_id_comp_level != 512 &&
+	    args->lock_id_comp_level != 1024 &&
+	    args->lock_id_comp_level != 2048 &&
+	    args->lock_id_comp_level != 4096 &&
+	    args->lock_id_comp_level != 65536) {
+		resp->status = DLB2_ST_INVALID_LOCK_ID_COMP_LEVEL;
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void
+dlb2_log_create_ldb_queue_args(struct dlb2_hw *hw,
+			       u32 domain_id,
+			       struct dlb2_create_ldb_queue_args *args,
+			       bool vdev_req,
+			       unsigned int vdev_id)
+{
+	DLB2_HW_DBG(hw, "DLB2 create load-balanced queue arguments:\n");
+	if (vdev_req)
+		DLB2_HW_DBG(hw, "(Request from vdev %d)\n", vdev_id);
+	DLB2_HW_DBG(hw, "\tDomain ID:                  %d\n",
+		    domain_id);
+	DLB2_HW_DBG(hw, "\tNumber of sequence numbers: %d\n",
+		    args->num_sequence_numbers);
+	DLB2_HW_DBG(hw, "\tNumber of QID inflights:    %d\n",
+		    args->num_qid_inflights);
+	DLB2_HW_DBG(hw, "\tNumber of ATM inflights:    %d\n",
+		    args->num_atomic_inflights);
+}
+
+/**
+ * dlb2_hw_create_ldb_queue() - Allocate and initialize a DLB LDB queue.
+ * @hw:	Contains the current state of the DLB2 hardware.
+ * @domain_id: Domain ID
+ * @args: User-provided arguments.
+ * @resp: Response to user.
+ * @vdev_req: Request came from a virtual device.
+ * @vdev_id: If vdev_req is true, this contains the virtual device's ID.
+ *
+ * Return: returns < 0 on error, 0 otherwise. If the driver is unable to
+ * satisfy a request, resp->status will be set accordingly.
+ */
+int dlb2_hw_create_ldb_queue(struct dlb2_hw *hw,
+			     u32 domain_id,
+			     struct dlb2_create_ldb_queue_args *args,
+			     struct dlb2_cmd_response *resp,
+			     bool vdev_req,
+			     unsigned int vdev_id)
+{
+	struct dlb2_hw_domain *domain;
+	struct dlb2_ldb_queue *queue;
+	int ret;
+
+	dlb2_log_create_ldb_queue_args(hw, domain_id, args, vdev_req, vdev_id);
+
+	/*
+	 * Verify that hardware resources are available before attempting to
+	 * satisfy the request. This simplifies the error unwinding code.
+	 */
+	ret = dlb2_verify_create_ldb_queue_args(hw,
+						domain_id,
+						args,
+						resp,
+						vdev_req,
+						vdev_id);
+	if (ret)
+		return ret;
+
+	domain = dlb2_get_domain_from_id(hw, domain_id, vdev_req, vdev_id);
+	if (!domain) {
+		DLB2_HW_ERR(hw,
+			    "[%s():%d] Internal error: domain not found\n",
+			    __func__, __LINE__);
+		return -EFAULT;
+	}
+
+	queue = DLB2_DOM_LIST_HEAD(domain->avail_ldb_queues, typeof(*queue));
+	if (!queue) {
+		DLB2_HW_ERR(hw,
+			    "[%s():%d] Internal error: no available ldb queues\n",
+			    __func__, __LINE__);
+		return -EFAULT;
+	}
+
+	ret = dlb2_ldb_queue_attach_resources(hw, domain, queue, args);
+	if (ret < 0) {
+		DLB2_HW_ERR(hw,
+			    "[%s():%d] Internal error: failed to attach the ldb queue resources\n",
+			    __func__, __LINE__);
+		return ret;
+	}
+
+	dlb2_configure_ldb_queue(hw, domain, queue, args, vdev_req, vdev_id);
+
+	queue->num_mappings = 0;
+
+	queue->configured = true;
+
+	/*
+	 * Configuration succeeded, so move the resource from the 'avail' to
+	 * the 'used' list.
+	 */
+	dlb2_list_del(&domain->avail_ldb_queues, &queue->domain_list);
+
+	dlb2_list_add(&domain->used_ldb_queues, &queue->domain_list);
+
+	resp->status = 0;
+	resp->id = (vdev_req) ? queue->id.virt_id : queue->id.phys_id;
+
+	return 0;
+}
+
+int dlb2_get_group_sequence_numbers(struct dlb2_hw *hw, unsigned int group_id)
+{
+	if (group_id >= DLB2_MAX_NUM_SEQUENCE_NUMBER_GROUPS)
+		return -EINVAL;
+
+	return hw->rsrcs.sn_groups[group_id].sequence_numbers_per_queue;
+}
+
+int dlb2_get_group_sequence_number_occupancy(struct dlb2_hw *hw,
+					     unsigned int group_id)
+{
+	if (group_id >= DLB2_MAX_NUM_SEQUENCE_NUMBER_GROUPS)
+		return -EINVAL;
+
+	return dlb2_sn_group_used_slots(&hw->rsrcs.sn_groups[group_id]);
+}
+
+static void dlb2_log_set_group_sequence_numbers(struct dlb2_hw *hw,
+						unsigned int group_id,
+						unsigned long val)
+{
+	DLB2_HW_DBG(hw, "DLB2 set group sequence numbers:\n");
+	DLB2_HW_DBG(hw, "\tGroup ID: %u\n", group_id);
+	DLB2_HW_DBG(hw, "\tValue:    %lu\n", val);
+}
+
+int dlb2_set_group_sequence_numbers(struct dlb2_hw *hw,
+				    unsigned int group_id,
+				    unsigned long val)
+{
+	u32 valid_allocations[] = {64, 128, 256, 512, 1024};
+	union dlb2_ro_pipe_grp_sn_mode r0 = { {0} };
+	struct dlb2_sn_group *group;
+	int mode;
+
+	if (group_id >= DLB2_MAX_NUM_SEQUENCE_NUMBER_GROUPS)
+		return -EINVAL;
+
+	group = &hw->rsrcs.sn_groups[group_id];
+
+	/*
+	 * Once the first load-balanced queue using an SN group is configured,
+	 * the group cannot be changed.
+	 */
+	if (group->slot_use_bitmap != 0)
+		return -EPERM;
+
+	for (mode = 0; mode < DLB2_MAX_NUM_SEQUENCE_NUMBER_MODES; mode++)
+		if (val == valid_allocations[mode])
+			break;
+
+	if (mode == DLB2_MAX_NUM_SEQUENCE_NUMBER_MODES)
+		return -EINVAL;
+
+	group->mode = mode;
+	group->sequence_numbers_per_queue = val;
+
+	r0.field.sn_mode_0 = hw->rsrcs.sn_groups[0].mode;
+	r0.field.sn_mode_1 = hw->rsrcs.sn_groups[1].mode;
+
+	DLB2_CSR_WR(hw, DLB2_RO_PIPE_GRP_SN_MODE, r0.val);
+
+	dlb2_log_set_group_sequence_numbers(hw, group_id, val);
+
+	return 0;
+}
diff --git a/drivers/event/dlb2/pf/dlb2_main.c b/drivers/event/dlb2/pf/dlb2_main.c
index ca1ad69..b8e32ab 100644
--- a/drivers/event/dlb2/pf/dlb2_main.c
+++ b/drivers/event/dlb2/pf/dlb2_main.c
@@ -632,3 +632,13 @@ dlb2_pf_reset_domain(struct dlb2_hw *hw, u32 id)
 {
 	return dlb2_reset_domain(hw, id, NOT_VF_REQ, PF_ID_ZERO);
 }
+
+int
+dlb2_pf_create_ldb_queue(struct dlb2_hw *hw,
+			 u32 id,
+			 struct dlb2_create_ldb_queue_args *args,
+			 struct dlb2_cmd_response *resp)
+{
+	return dlb2_hw_create_ldb_queue(hw, id, args, resp, NOT_VF_REQ,
+					PF_ID_ZERO);
+}
diff --git a/drivers/event/dlb2/pf/dlb2_pf.c b/drivers/event/dlb2/pf/dlb2_pf.c
index 21f28a4..dea70e6 100644
--- a/drivers/event/dlb2/pf/dlb2_pf.c
+++ b/drivers/event/dlb2/pf/dlb2_pf.c
@@ -156,6 +156,84 @@ dlb2_pf_domain_reset(struct dlb2_eventdev *dlb2)
 		DLB2_LOG_ERR("dlb2_pf_reset_domain err %d", ret);
 }
 
+static int
+dlb2_pf_ldb_queue_create(struct dlb2_hw_dev *handle,
+			 struct dlb2_create_ldb_queue_args *cfg)
+{
+	struct dlb2_dev *dlb2_dev = (struct dlb2_dev *)handle->pf_dev;
+	struct dlb2_cmd_response response = {0};
+	int ret;
+
+	DLB2_INFO(dev->dlb2_device, "Entering %s()\n", __func__);
+
+	ret = dlb2_pf_create_ldb_queue(&dlb2_dev->hw,
+				       handle->domain_id,
+				       cfg,
+				       &response);
+
+	cfg->response = response;
+
+	DLB2_INFO(dev->dlb2_device, "Exiting %s() with ret=%d\n",
+		  __func__, ret);
+
+	return ret;
+}
+
+static int
+dlb2_pf_get_sn_occupancy(struct dlb2_hw_dev *handle,
+			 struct dlb2_get_sn_occupancy_args *args)
+{
+	struct dlb2_dev *dlb2_dev = (struct dlb2_dev *)handle->pf_dev;
+	struct dlb2_cmd_response response = {0};
+	int ret;
+
+	ret = dlb2_get_group_sequence_number_occupancy(&dlb2_dev->hw,
+						       args->group);
+
+	response.id = ret;
+	response.status = 0;
+
+	args->response = response;
+
+	return ret;
+}
+
+static int
+dlb2_pf_get_sn_allocation(struct dlb2_hw_dev *handle,
+			  struct dlb2_get_sn_allocation_args *args)
+{
+	struct dlb2_dev *dlb2_dev = (struct dlb2_dev *)handle->pf_dev;
+	struct dlb2_cmd_response response = {0};
+	int ret;
+
+	ret = dlb2_get_group_sequence_numbers(&dlb2_dev->hw, args->group);
+
+	response.id = ret;
+	response.status = 0;
+
+	args->response = response;
+
+	return ret;
+}
+
+static int
+dlb2_pf_set_sn_allocation(struct dlb2_hw_dev *handle,
+			  struct dlb2_set_sn_allocation_args *args)
+{
+	struct dlb2_dev *dlb2_dev = (struct dlb2_dev *)handle->pf_dev;
+	struct dlb2_cmd_response response = {0};
+	int ret;
+
+	ret = dlb2_set_group_sequence_numbers(&dlb2_dev->hw, args->group,
+					      args->num);
+
+	response.status = 0;
+
+	args->response = response;
+
+	return ret;
+}
+
 static void
 dlb2_pf_iface_fn_ptrs_init(void)
 {
@@ -168,6 +246,10 @@ dlb2_pf_iface_fn_ptrs_init(void)
 	dlb2_iface_get_num_resources = dlb2_pf_get_num_resources;
 	dlb2_iface_get_cq_poll_mode = dlb2_pf_get_cq_poll_mode;
 	dlb2_iface_sched_domain_create = dlb2_pf_sched_domain_create;
+	dlb2_iface_ldb_queue_create = dlb2_pf_ldb_queue_create;
+	dlb2_iface_get_sn_allocation = dlb2_pf_get_sn_allocation;
+	dlb2_iface_set_sn_allocation = dlb2_pf_set_sn_allocation;
+	dlb2_iface_get_sn_occupancy = dlb2_pf_get_sn_occupancy;
 }
 
 /* PCI DEV HOOKS */
-- 
2.6.4


  parent reply index

Thread overview: 366+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-11 20:26 [dpdk-dev] [PATCH 00/22] Add DLB2 PMD Timothy McDaniel
2020-09-11 20:26 ` [dpdk-dev] [PATCH 01/22] event/dlb2: add meson build infrastructure Timothy McDaniel
2020-10-06 15:58   ` Eads, Gage
2020-10-17 18:20   ` [dpdk-dev] [PATCH v2 00/22] Add DLB2 PMD Timothy McDaniel
2020-10-17 18:20     ` [dpdk-dev] [PATCH v2 01/22] event/dlb2: add documentation and meson build infrastructure Timothy McDaniel
2020-10-18  8:48       ` Jerin Jacob
2020-10-19  8:33         ` Bruce Richardson
2020-10-20 15:17           ` McDaniel, Timothy
2020-10-20 15:20             ` Thomas Monjalon
2020-10-20 15:33               ` McDaniel, Timothy
2020-10-20 15:38                 ` Bruce Richardson
2020-10-20 15:34             ` Bruce Richardson
2020-10-20 15:43               ` McDaniel, Timothy
2020-10-21 16:33           ` McDaniel, Timothy
2020-10-20 14:07         ` McDaniel, Timothy
2020-10-19  9:59       ` Kinsella, Ray
2020-10-30  9:43       ` [dpdk-dev] [PATCH v5 00/23] Add DLB2 PMD Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 01/23] event/dlb2: add documentation and meson build infrastructure Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 02/23] event/dlb2: add dynamic logging Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 03/23] event/dlb2: add private data structures and constants Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 04/23] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 05/23] event/dlb2: add inline functions Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 06/23] event/dlb2: add eventdev probe Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 07/23] event/dlb2: add flexible interface Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 08/23] event/dlb2: add probe-time hardware init Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 09/23] event/dlb2: add xstats Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 10/23] event/dlb2: add infos get and configure Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 11/23] event/dlb2: add queue and port default conf Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 12/23] event/dlb2: add queue setup Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 13/23] event/dlb2: add port setup Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 14/23] event/dlb2: add port link Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 15/23] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 16/23] event/dlb2: add eventdev start Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 17/23] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 18/23] event/dlb2: add dequeue " Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 19/23] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 20/23] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 21/23] event/dlb2: add PMD self-tests Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 22/23] event/dlb2: add queue and port release Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 23/23] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-10-30 10:01         ` [dpdk-dev] [PATCH v5 00/23] Add DLB2 PMD Thomas Monjalon
2020-10-30 10:16           ` McDaniel, Timothy
2020-10-30 10:32             ` Jerin Jacob
2020-10-30 10:43               ` Thomas Monjalon
2020-10-30 11:58             ` McDaniel, Timothy
2020-10-30 13:15               ` Thomas Monjalon
2020-10-30 15:35                 ` McDaniel, Timothy
2020-10-30 15:47                   ` Thomas Monjalon
2020-10-30 16:02                     ` McDaniel, Timothy
2020-10-30 16:42                       ` Thomas Monjalon
2020-10-30 14:21         ` Jerin Jacob
2020-10-30 15:25           ` McDaniel, Timothy
2020-10-30 15:31             ` Jerin Jacob
2020-10-30 16:08               ` Van Haaren, Harry
2020-10-30 16:13                 ` McDaniel, Timothy
2020-10-30 15:33             ` David Marchand
2020-10-30 18:28       ` [dpdk-dev] [PATCH v6 " Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 01/23] event/dlb2: add documentation and meson build infrastructure Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 02/23] event/dlb2: add dynamic logging Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 03/23] event/dlb2: add private data structures and constants Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 04/23] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 05/23] event/dlb2: add inline functions Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 06/23] event/dlb2: add eventdev probe Timothy McDaniel
2020-10-30 19:51           ` Eads, Gage
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 07/23] event/dlb2: add flexible interface Timothy McDaniel
2020-10-30 19:51           ` Eads, Gage
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 08/23] event/dlb2: add probe-time hardware init Timothy McDaniel
2020-10-30 19:50           ` Eads, Gage
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 09/23] event/dlb2: add xstats Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 10/23] event/dlb2: add infos get and configure Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 11/23] event/dlb2: add queue and port default conf Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 12/23] event/dlb2: add queue setup Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 13/23] event/dlb2: add port setup Timothy McDaniel
2020-10-30 18:50           ` Eads, Gage
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 14/23] event/dlb2: add port link Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 15/23] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-10-30 18:29         ` [dpdk-dev] [PATCH v6 16/23] event/dlb2: add eventdev start Timothy McDaniel
2020-10-30 18:29         ` [dpdk-dev] [PATCH v6 17/23] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-10-30 18:29         ` [dpdk-dev] [PATCH v6 18/23] event/dlb2: add dequeue " Timothy McDaniel
2020-10-30 18:29         ` [dpdk-dev] [PATCH v6 19/23] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-10-30 18:29         ` [dpdk-dev] [PATCH v6 20/23] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-10-30 18:29         ` [dpdk-dev] [PATCH v6 21/23] event/dlb2: add PMD self-tests Timothy McDaniel
2020-10-30 18:29         ` [dpdk-dev] [PATCH v6 22/23] event/dlb2: add queue and port release Timothy McDaniel
2020-10-30 18:29         ` [dpdk-dev] [PATCH v6 23/23] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-10-30 23:51       ` [dpdk-dev] [PATCH v7 00/23] Add DLB2 PMD Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 01/23] event/dlb2: add documentation and meson build infrastructure Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 02/23] event/dlb2: add dynamic logging Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 03/23] event/dlb2: add private data structures and constants Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 04/23] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 05/23] event/dlb2: add inline functions Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 06/23] event/dlb2: add eventdev probe Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 07/23] event/dlb2: add flexible interface Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 08/23] event/dlb2: add probe-time hardware init Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 09/23] event/dlb2: add xstats Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 10/23] event/dlb2: add infos get and configure Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 11/23] event/dlb2: add queue and port default conf Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 12/23] event/dlb2: add queue setup Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 13/23] event/dlb2: add port setup Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 14/23] event/dlb2: add port link Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 15/23] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 16/23] event/dlb2: add eventdev start Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 17/23] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 18/23] event/dlb2: add dequeue " Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 19/23] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 20/23] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 21/23] event/dlb2: add PMD self-tests Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 22/23] event/dlb2: add queue and port release Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 23/23] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-10-31  2:01       ` [dpdk-dev] [PATCH v8 00/23] Add DLB2 PMD Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 01/23] event/dlb2: add documentation and meson build infrastructure Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 02/23] event/dlb2: add dynamic logging Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 03/23] event/dlb2: add private data structures and constants Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 04/23] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 05/23] event/dlb2: add inline functions Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 06/23] event/dlb2: add eventdev probe Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 07/23] event/dlb2: add flexible interface Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 08/23] event/dlb2: add probe-time hardware init Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 09/23] event/dlb2: add xstats Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 10/23] event/dlb2: add infos get and configure Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 11/23] event/dlb2: add queue and port default conf Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 12/23] event/dlb2: add queue setup Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 13/23] event/dlb2: add port setup Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 14/23] event/dlb2: add port link Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 15/23] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 16/23] event/dlb2: add eventdev start Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 17/23] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-10-31  9:52           ` Jerin Jacob
2020-10-31 17:13             ` McDaniel, Timothy
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 18/23] event/dlb2: add dequeue " Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 19/23] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 20/23] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-10-31 10:51           ` David Marchand
2020-10-31 16:37             ` McDaniel, Timothy
2020-10-31 19:19               ` McDaniel, Timothy
2020-10-31 21:38                 ` David Marchand
2020-10-31 21:43                   ` McDaniel, Timothy
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 21/23] event/dlb2: add PMD self-tests Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 22/23] event/dlb2: add queue and port release Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 23/23] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-10-31 17:25       ` [dpdk-dev] [PATCH v9 00/23] Add DLB2 PMD Timothy McDaniel
2020-10-31 17:25         ` [dpdk-dev] [PATCH v9 01/23] event/dlb2: add documentation and meson build infrastructure Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 02/23] event/dlb2: add dynamic logging Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 03/23] event/dlb2: add private data structures and constants Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 04/23] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 05/23] event/dlb2: add inline functions Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 06/23] event/dlb2: add eventdev probe Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 07/23] event/dlb2: add flexible interface Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 08/23] event/dlb2: add probe-time hardware init Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 09/23] event/dlb2: add xstats Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 10/23] event/dlb2: add infos get and configure Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 11/23] event/dlb2: add queue and port default conf Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 12/23] event/dlb2: add queue setup Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 13/23] event/dlb2: add port setup Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 14/23] event/dlb2: add port link Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 15/23] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 16/23] event/dlb2: add eventdev start Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 17/23] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 18/23] event/dlb2: add dequeue " Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 19/23] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 20/23] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 21/23] event/dlb2: add PMD self-tests Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 22/23] event/dlb2: add queue and port release Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 23/23] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-11-01 20:00       ` [dpdk-dev] [PATCH v10 00/23] Add DLB2 PMD Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 01/23] event/dlb2: add documentation and meson build infrastructure Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 02/23] event/dlb2: add dynamic logging Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 03/23] event/dlb2: add private data structures and constants Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 04/23] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 05/23] event/dlb2: add inline functions Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 06/23] event/dlb2: add eventdev probe Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 07/23] event/dlb2: add flexible interface Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 08/23] event/dlb2: add probe-time hardware init Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 09/23] event/dlb2: add xstats Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 10/23] event/dlb2: add infos get and configure Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 11/23] event/dlb2: add queue and port default conf Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 12/23] event/dlb2: add queue setup Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 13/23] event/dlb2: add port setup Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 14/23] event/dlb2: add port link Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 15/23] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 16/23] event/dlb2: add eventdev start Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 17/23] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 18/23] event/dlb2: add dequeue " Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 19/23] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 20/23] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 21/23] event/dlb2: add PMD self-tests Timothy McDaniel
2020-11-01 20:01         ` [dpdk-dev] [PATCH v10 22/23] event/dlb2: add queue and port release Timothy McDaniel
2020-11-01 20:01         ` [dpdk-dev] [PATCH v10 23/23] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-11-01 23:37       ` [dpdk-dev] [PATCH v11 00/23] Add DLB2 PMD Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 01/23] event/dlb2: add documentation and meson build infrastructure Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 02/23] event/dlb2: add dynamic logging Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 03/23] event/dlb2: add private data structures and constants Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 04/23] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 05/23] event/dlb2: add inline functions Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 06/23] event/dlb2: add eventdev probe Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 07/23] event/dlb2: add flexible interface Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 08/23] event/dlb2: add probe-time hardware init Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 09/23] event/dlb2: add xstats Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 10/23] event/dlb2: add infos get and configure Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 11/23] event/dlb2: add queue and port default conf Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 12/23] event/dlb2: add queue setup Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 13/23] event/dlb2: add port setup Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 14/23] event/dlb2: add port link Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 15/23] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 16/23] event/dlb2: add eventdev start Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 17/23] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 18/23] event/dlb2: add dequeue " Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 19/23] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-11-01 23:38         ` [dpdk-dev] [PATCH v11 20/23] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-11-01 23:38         ` [dpdk-dev] [PATCH v11 21/23] event/dlb2: add PMD self-tests Timothy McDaniel
2020-11-01 23:38         ` [dpdk-dev] [PATCH v11 22/23] event/dlb2: add queue and port release Timothy McDaniel
2020-11-01 23:38         ` [dpdk-dev] [PATCH v11 23/23] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-11-02  8:49         ` [dpdk-dev] [PATCH v11 00/23] Add DLB2 PMD Jerin Jacob
2020-10-17 18:20     ` [dpdk-dev] [PATCH v2 02/22] event/dlb2: add dynamic logging Timothy McDaniel
2020-10-18  8:57       ` Jerin Jacob
2020-10-20 14:08         ` McDaniel, Timothy
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 03/22] event/dlb2: add private data structures and constants Timothy McDaniel
2020-10-20 14:01       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 04/22] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 05/22] event/dlb2: add inline functions Timothy McDaniel
2020-10-18  8:59       ` Jerin Jacob
2020-10-20 14:08         ` McDaniel, Timothy
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 06/22] event/dlb2: add probe Timothy McDaniel
2020-10-18  8:39       ` Jerin Jacob
2020-10-20 14:04         ` McDaniel, Timothy
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 07/22] event/dlb2: add xstats Timothy McDaniel
2020-10-20 14:01       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 08/22] event/dlb2: add infos get and configure Timothy McDaniel
2020-10-20 14:01       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 09/22] event/dlb2: add queue and port default conf Timothy McDaniel
2020-10-20 14:02       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 10/22] event/dlb2: add queue setup Timothy McDaniel
2020-10-20 14:01       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 11/22] event/dlb2: add port setup Timothy McDaniel
2020-10-20 14:02       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 12/22] event/dlb2: add port link Timothy McDaniel
2020-10-20 14:02       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 13/22] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 14/22] event/dlb2: add eventdev start Timothy McDaniel
2020-10-20 14:04       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 15/22] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 16/22] event/dlb2: add dequeue " Timothy McDaniel
2020-10-20 14:04       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 17/22] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-10-20 14:04       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 18/22] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-10-18  9:13       ` Jerin Jacob
2020-10-20 14:12         ` McDaniel, Timothy
2020-10-19 10:01       ` Kinsella, Ray
2020-10-20 14:05       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 19/22] event/dlb2: add PMD self-tests Timothy McDaniel
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 20/22] event/dlb2: add queue and port release Timothy McDaniel
2020-10-20 14:04       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 21/22] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 22/22] doc: add new DLB2 eventdev driver to relnotes Timothy McDaniel
2020-10-18  9:22       ` Jerin Jacob
2020-10-20 14:13         ` McDaniel, Timothy
2020-10-24 13:06     ` [dpdk-dev] [PATCH v2 00/22] Add DLB2 PMD Thomas Monjalon
2020-10-23 18:30   ` [dpdk-dev] [PATCH v3 00/23] " Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 01/23] event/dlb2: add documentation and meson build infrastructure Timothy McDaniel
2020-10-24 12:58       ` Jerin Jacob
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 02/23] event/dlb2: add dynamic logging Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 03/23] event/dlb2: add private data structures and constants Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 04/23] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 05/23] event/dlb2: add inline functions Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 06/23] event/dlb2: add eventdev probe Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 07/23] event/dlb2: add flexible interface Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 08/23] event/dlb2: add probe-time hardware init Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 09/23] event/dlb2: add xstats Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 10/23] event/dlb2: add infos get and configure Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 11/23] event/dlb2: add queue and port default conf Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 12/23] event/dlb2: add queue setup Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 13/23] event/dlb2: add port setup Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 14/23] event/dlb2: add port link Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 15/23] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 16/23] event/dlb2: add eventdev start Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 17/23] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 18/23] event/dlb2: add dequeue " Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 19/23] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 20/23] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 21/23] event/dlb2: add PMD self-tests Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 22/23] event/dlb2: add queue and port release Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 23/23] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-10-29 15:24   ` [dpdk-dev] [PATCH v4 00/23] Add DLB2 PMD Timothy McDaniel
2020-10-29 15:24     ` [dpdk-dev] [PATCH v4 01/23] event/dlb2: add documentation and meson build infrastructure Timothy McDaniel
2020-10-29 15:24     ` [dpdk-dev] [PATCH v4 02/23] event/dlb2: add dynamic logging Timothy McDaniel
2020-10-29 15:24     ` [dpdk-dev] [PATCH v4 03/23] event/dlb2: add private data structures and constants Timothy McDaniel
2020-10-29 15:29       ` Stephen Hemminger
2020-10-29 16:07         ` McDaniel, Timothy
2020-10-29 15:30       ` Stephen Hemminger
2020-10-29 16:10         ` McDaniel, Timothy
2020-10-29 15:24     ` [dpdk-dev] [PATCH v4 04/23] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-10-29 15:24     ` [dpdk-dev] [PATCH v4 05/23] event/dlb2: add inline functions Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 06/23] event/dlb2: add eventdev probe Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 07/23] event/dlb2: add flexible interface Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 08/23] event/dlb2: add probe-time hardware init Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 09/23] event/dlb2: add xstats Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 10/23] event/dlb2: add infos get and configure Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 11/23] event/dlb2: add queue and port default conf Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 12/23] event/dlb2: add queue setup Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 13/23] event/dlb2: add port setup Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 14/23] event/dlb2: add port link Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 15/23] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 16/23] event/dlb2: add eventdev start Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 17/23] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 18/23] event/dlb2: add dequeue " Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 19/23] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 20/23] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 21/23] event/dlb2: add PMD self-tests Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 22/23] event/dlb2: add queue and port release Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 23/23] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-09-11 20:26 ` [dpdk-dev] [PATCH 02/22] event/dlb2: add dynamic logging Timothy McDaniel
2020-10-06 16:52   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 03/22] event/dlb2: add private data structures and constants Timothy McDaniel
2020-10-06 16:52   ` Eads, Gage
2020-10-07 16:14   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 04/22] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-10-06 19:26   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 05/22] event/dlb2: add inline functions Timothy McDaniel
2020-10-06 21:33   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 06/22] event/dlb2: add probe Timothy McDaniel
2020-10-07 16:56   ` Eads, Gage
2020-10-18  9:05   ` Jerin Jacob
2020-10-20 14:11     ` McDaniel, Timothy
2020-09-11 20:26 ` [dpdk-dev] [PATCH 07/22] event/dlb2: add xstats Timothy McDaniel
2020-09-17 20:58   ` Chen, Mike Ximing
2020-09-17 21:26     ` McDaniel, Timothy
2020-09-18  0:37       ` Chen, Mike Ximing
2020-09-18  8:39         ` Bruce Richardson
2020-10-07 18:47   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 08/22] event/dlb2: add infos get and configure Timothy McDaniel
2020-10-07 19:14   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 09/22] event/dlb2: add queue and port default conf Timothy McDaniel
2020-10-07 19:15   ` Eads, Gage
2020-09-11 20:26 ` Timothy McDaniel [this message]
2020-10-07 19:26   ` [dpdk-dev] [PATCH 10/22] event/dlb2: add queue setup Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 11/22] event/dlb2: add port setup Timothy McDaniel
2020-10-07 20:34   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 12/22] event/dlb2: add port link Timothy McDaniel
2020-10-07 20:40   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 13/22] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-10-07 20:44   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 14/22] event/dlb2: add eventdev start Timothy McDaniel
2020-10-07 20:51   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 15/22] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-10-07 21:02   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 16/22] event/dlb2: add dequeue " Timothy McDaniel
2020-10-07 21:18   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 17/22] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-10-07 21:21   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 18/22] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-10-07 21:24   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 19/22] event/dlb2: add PMD self-tests Timothy McDaniel
2020-10-07 21:33   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 20/22] event/dlb2: add queue and port release Timothy McDaniel
2020-10-07 21:55   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 21/22] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-10-07 21:58   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 22/22] doc: add new DLB2 eventdev driver to relnotes Timothy McDaniel
2020-10-07 22:04   ` Eads, Gage
2020-09-21 17:11 ` [dpdk-dev] [PATCH 00/22] Add DLB2 PMD Jerin Jacob
2020-09-21 17:15   ` McDaniel, Timothy
2020-09-29 18:41     ` Jerin Jacob
2020-09-29 18:46       ` McDaniel, Timothy
2020-09-30 16:10       ` McDaniel, Timothy
2020-09-29 18:46 ` Jerin Jacob
2020-09-30 16:14   ` McDaniel, Timothy

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1599855987-25976-11-git-send-email-timothy.mcdaniel@intel.com \
    --to=timothy.mcdaniel@intel.com \
    --cc=dev@dpdk.org \
    --cc=erik.g.carrillo@intel.com \
    --cc=gage.eads@intel.com \
    --cc=harry.van.haaren@intel.com \
    --cc=jerinj@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK patches and discussions

Archives are clonable:
	git clone --mirror http://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ http://inbox.dpdk.org/dev \
		dev@dpdk.org
	public-inbox-index dev


Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/ public-inbox