DPDK patches and discussions
 help / color / Atom feed
From: Timothy McDaniel <timothy.mcdaniel@intel.com>
Cc: dev@dpdk.org, erik.g.carrillo@intel.com, gage.eads@intel.com,
	harry.van.haaren@intel.com, jerinj@marvell.com
Subject: [dpdk-dev] [PATCH 04/22] event/dlb2: add definitions shared with LKM or shared code
Date: Fri, 11 Sep 2020 15:26:09 -0500
Message-ID: <1599855987-25976-5-git-send-email-timothy.mcdaniel@intel.com> (raw)
In-Reply-To: <1599855987-25976-1-git-send-email-timothy.mcdaniel@intel.com>

Add headers containing structs and constants shared between
the PMD and the shared code.  The term shared code refers to
the code that implements the hardware interface. The shared code
is introduced in the probe patch, and then is extended as
additional eventdev PMD entry points are added to the patchset.
In the case of the bifurcated PMD (to be introduced in the
future), the shared code is contained in the Linux kernel
module itself.

Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
---
 drivers/event/dlb2/dlb2_user.h | 883 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 883 insertions(+)
 create mode 100644 drivers/event/dlb2/dlb2_user.h

diff --git a/drivers/event/dlb2/dlb2_user.h b/drivers/event/dlb2/dlb2_user.h
new file mode 100644
index 0000000..1bfec7f
--- /dev/null
+++ b/drivers/event/dlb2/dlb2_user.h
@@ -0,0 +1,883 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2016-2020 Intel Corporation
+ */
+
+#ifndef __DLB2_USER_H
+#define __DLB2_USER_H
+
+#define DLB2_MAX_NAME_LEN 64
+
+#include <linux/types.h>
+
+enum dlb2_error {
+	DLB2_ST_SUCCESS = 0,
+	DLB2_ST_NAME_EXISTS,
+	DLB2_ST_DOMAIN_UNAVAILABLE,
+	DLB2_ST_LDB_PORTS_UNAVAILABLE,
+	DLB2_ST_DIR_PORTS_UNAVAILABLE,
+	DLB2_ST_LDB_QUEUES_UNAVAILABLE,
+	DLB2_ST_LDB_CREDITS_UNAVAILABLE,
+	DLB2_ST_DIR_CREDITS_UNAVAILABLE,
+	DLB2_ST_SEQUENCE_NUMBERS_UNAVAILABLE,
+	DLB2_ST_INVALID_DOMAIN_ID,
+	DLB2_ST_INVALID_QID_INFLIGHT_ALLOCATION,
+	DLB2_ST_ATOMIC_INFLIGHTS_UNAVAILABLE,
+	DLB2_ST_HIST_LIST_ENTRIES_UNAVAILABLE,
+	DLB2_ST_INVALID_LDB_QUEUE_ID,
+	DLB2_ST_INVALID_CQ_DEPTH,
+	DLB2_ST_INVALID_CQ_VIRT_ADDR,
+	DLB2_ST_INVALID_PORT_ID,
+	DLB2_ST_INVALID_QID,
+	DLB2_ST_INVALID_PRIORITY,
+	DLB2_ST_NO_QID_SLOTS_AVAILABLE,
+	DLB2_ST_INVALID_DIR_QUEUE_ID,
+	DLB2_ST_DIR_QUEUES_UNAVAILABLE,
+	DLB2_ST_DOMAIN_NOT_CONFIGURED,
+	DLB2_ST_INTERNAL_ERROR,
+	DLB2_ST_DOMAIN_IN_USE,
+	DLB2_ST_DOMAIN_NOT_FOUND,
+	DLB2_ST_QUEUE_NOT_FOUND,
+	DLB2_ST_DOMAIN_STARTED,
+	DLB2_ST_DOMAIN_NOT_STARTED,
+	DLB2_ST_LDB_PORT_REQUIRED_FOR_LDB_QUEUES,
+	DLB2_ST_DOMAIN_RESET_FAILED,
+	DLB2_ST_MBOX_ERROR,
+	DLB2_ST_INVALID_HIST_LIST_DEPTH,
+	DLB2_ST_NO_MEMORY,
+	DLB2_ST_INVALID_LOCK_ID_COMP_LEVEL,
+	DLB2_ST_INVALID_COS_ID,
+};
+
+static const char dlb2_error_strings[][128] = {
+	"DLB2_ST_SUCCESS",
+	"DLB2_ST_NAME_EXISTS",
+	"DLB2_ST_DOMAIN_UNAVAILABLE",
+	"DLB2_ST_LDB_PORTS_UNAVAILABLE",
+	"DLB2_ST_DIR_PORTS_UNAVAILABLE",
+	"DLB2_ST_LDB_QUEUES_UNAVAILABLE",
+	"DLB2_ST_LDB_CREDITS_UNAVAILABLE",
+	"DLB2_ST_DIR_CREDITS_UNAVAILABLE",
+	"DLB2_ST_SEQUENCE_NUMBERS_UNAVAILABLE",
+	"DLB2_ST_INVALID_DOMAIN_ID",
+	"DLB2_ST_INVALID_QID_INFLIGHT_ALLOCATION",
+	"DLB2_ST_ATOMIC_INFLIGHTS_UNAVAILABLE",
+	"DLB2_ST_HIST_LIST_ENTRIES_UNAVAILABLE",
+	"DLB2_ST_INVALID_LDB_QUEUE_ID",
+	"DLB2_ST_INVALID_CQ_DEPTH",
+	"DLB2_ST_INVALID_CQ_VIRT_ADDR",
+	"DLB2_ST_INVALID_PORT_ID",
+	"DLB2_ST_INVALID_QID",
+	"DLB2_ST_INVALID_PRIORITY",
+	"DLB2_ST_NO_QID_SLOTS_AVAILABLE",
+	"DLB2_ST_INVALID_DIR_QUEUE_ID",
+	"DLB2_ST_DIR_QUEUES_UNAVAILABLE",
+	"DLB2_ST_DOMAIN_NOT_CONFIGURED",
+	"DLB2_ST_INTERNAL_ERROR",
+	"DLB2_ST_DOMAIN_IN_USE",
+	"DLB2_ST_DOMAIN_NOT_FOUND",
+	"DLB2_ST_QUEUE_NOT_FOUND",
+	"DLB2_ST_DOMAIN_STARTED",
+	"DLB2_ST_DOMAIN_NOT_STARTED",
+	"DLB2_ST_LDB_PORT_REQUIRED_FOR_LDB_QUEUES",
+	"DLB2_ST_DOMAIN_RESET_FAILED",
+	"DLB2_ST_MBOX_ERROR",
+	"DLB2_ST_INVALID_HIST_LIST_DEPTH",
+	"DLB2_ST_NO_MEMORY",
+	"DLB2_ST_INVALID_LOCK_ID_COMP_LEVEL",
+	"DLB2_ST_INVALID_COS_ID",
+};
+
+struct dlb2_cmd_response {
+	__u32 status; /* Interpret using enum dlb2_error */
+	__u32 id;
+};
+
+/********************************/
+/* 'dlb2' device file commands */
+/********************************/
+
+#define DLB2_DEVICE_VERSION(x) (((x) >> 8) & 0xFF)
+#define DLB2_DEVICE_REVISION(x) ((x) & 0xFF)
+
+enum dlb2_revisions {
+	DLB2_REV_A0 = 0,
+};
+
+/*
+ * DLB2_CMD_GET_DEVICE_VERSION: Query the DLB device version.
+ *
+ *	This ioctl interface is the same in all driver versions and is always
+ *	the first ioctl.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ *	ioctl request arg is invalid, the driver won't set status.
+ * - response.id[7:0]: Device revision.
+ * - response.id[15:8]: Device version.
+ */
+
+struct dlb2_get_device_version_args {
+	/* Output parameters */
+	struct dlb2_cmd_response response;
+};
+
+/*
+ * DLB2_CMD_CREATE_SCHED_DOMAIN: Create a DLB 2.0 scheduling domain and reserve
+ *	its hardware resources. This command returns the newly created domain
+ *	ID and a file descriptor for accessing the domain.
+ *
+ * Input parameters:
+ * - num_ldb_queues: Number of load-balanced queues.
+ * - num_ldb_ports: Number of load-balanced ports that can be allocated from
+ *	from any class-of-service with available ports.
+ * - num_cos_ldb_ports[4]: Number of load-balanced ports from
+ *	classes-of-service 0-3.
+ * - num_dir_ports: Number of directed ports. A directed port has one directed
+ *	queue, so no num_dir_queues argument is necessary.
+ * - num_atomic_inflights: This specifies the amount of temporary atomic QE
+ *	storage for the domain. This storage is divided among the domain's
+ *	load-balanced queues that are configured for atomic scheduling.
+ * - num_hist_list_entries: Amount of history list storage. This is divided
+ *	among the domain's CQs.
+ * - num_ldb_credits: Amount of load-balanced QE storage (QED). QEs occupy this
+ *	space until they are scheduled to a load-balanced CQ. One credit
+ *	represents the storage for one QE.
+ * - num_dir_credits: Amount of directed QE storage (DQED). QEs occupy this
+ *	space until they are scheduled to a directed CQ. One credit represents
+ *	the storage for one QE.
+ * - cos_strict: If set, return an error if there are insufficient ports in
+ *	class-of-service N to satisfy the num_ldb_ports_cosN argument. If
+ *	unset, attempt to fulfill num_ldb_ports_cosN arguments from other
+ *	classes-of-service if class N does not contain enough free ports.
+ * - padding1: Reserved for future use.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ *	ioctl request arg is invalid, the driver won't set status.
+ * - response.id: domain ID.
+ * - domain_fd: file descriptor for performing the domain's ioctl operations
+ * - padding0: Reserved for future use.
+ */
+struct dlb2_create_sched_domain_args {
+	/* Output parameters */
+	struct dlb2_cmd_response response;
+	__u32 domain_fd;
+	__u32 padding0;
+	/* Input parameters */
+	__u32 num_ldb_queues;
+	__u32 num_ldb_ports;
+	__u32 num_cos_ldb_ports[4];
+	__u32 num_dir_ports;
+	__u32 num_atomic_inflights;
+	__u32 num_hist_list_entries;
+	__u32 num_ldb_credits;
+	__u32 num_dir_credits;
+	__u8 cos_strict;
+	__u8 padding1[3];
+};
+
+/*
+ * DLB2_CMD_GET_NUM_RESOURCES: Return the number of available resources
+ *	(queues, ports, etc.) that this device owns.
+ *
+ * Output parameters:
+ * - num_domains: Number of available scheduling domains.
+ * - num_ldb_queues: Number of available load-balanced queues.
+ * - num_ldb_ports: Total number of available load-balanced ports.
+ * - num_cos_ldb_ports[4]: Number of available load-balanced ports from
+ *	classes-of-service 0-3.
+ * - num_dir_ports: Number of available directed ports. There is one directed
+ *	queue for every directed port.
+ * - num_atomic_inflights: Amount of available temporary atomic QE storage.
+ * - num_hist_list_entries: Amount of history list storage.
+ * - max_contiguous_hist_list_entries: History list storage is allocated in
+ *	a contiguous chunk, and this return value is the longest available
+ *	contiguous range of history list entries.
+ * - num_ldb_credits: Amount of available load-balanced QE storage.
+ * - num_dir_credits: Amount of available directed QE storage.
+ */
+struct dlb2_get_num_resources_args {
+	/* Output parameters */
+	__u32 num_sched_domains;
+	__u32 num_ldb_queues;
+	__u32 num_ldb_ports;
+	__u32 num_cos_ldb_ports[4];
+	__u32 num_dir_ports;
+	__u32 num_atomic_inflights;
+	__u32 num_hist_list_entries;
+	__u32 max_contiguous_hist_list_entries;
+	__u32 num_ldb_credits;
+	__u32 num_dir_credits;
+};
+
+/*
+ * DLB2_CMD_SET_SN_ALLOCATION: Configure a sequence number group (PF only)
+ *
+ * Input parameters:
+ * - group: Sequence number group ID.
+ * - num: Number of sequence numbers per queue.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ *	ioctl request arg is invalid, the driver won't set status.
+ */
+struct dlb2_set_sn_allocation_args {
+	/* Output parameters */
+	struct dlb2_cmd_response response;
+	/* Input parameters */
+	__u32 group;
+	__u32 num;
+};
+
+/*
+ * DLB2_CMD_GET_SN_ALLOCATION: Get a sequence number group's configuration
+ *
+ * Input parameters:
+ * - group: Sequence number group ID.
+ * - padding0: Reserved for future use.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ *	ioctl request arg is invalid, the driver won't set status.
+ * - response.id: Specified group's number of sequence numbers per queue.
+ */
+struct dlb2_get_sn_allocation_args {
+	/* Output parameters */
+	struct dlb2_cmd_response response;
+	/* Input parameters */
+	__u32 group;
+	__u32 padding0;
+};
+
+/*
+ * DLB2_CMD_SET_COS_BW: Set a bandwidth allocation percentage for a
+ *	load-balanced port class-of-service (PF only).
+ *
+ * Input parameters:
+ * - cos_id: class-of-service ID, between 0 and 3 (inclusive).
+ * - bandwidth: class-of-service bandwidth percentage. Total bandwidth
+ *		percentages across all 4 classes cannot exceed 100%.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ *	ioctl request arg is invalid, the driver won't set status.
+ */
+struct dlb2_set_cos_bw_args {
+	/* Output parameters */
+	struct dlb2_cmd_response response;
+	/* Input parameters */
+	__u32 cos_id;
+	__u32 bandwidth;
+};
+
+/*
+ * DLB2_CMD_GET_COS_BW: Get the bandwidth allocation percentage for a
+ *	load-balanced port class-of-service.
+ *
+ * Input parameters:
+ * - cos_id: class-of-service ID, between 0 and 3 (inclusive).
+ * - padding0: Reserved for future use.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ *	ioctl request arg is invalid, the driver won't set status.
+ * - response.id: Specified class's bandwidth percentage.
+ */
+struct dlb2_get_cos_bw_args {
+	/* Output parameters */
+	struct dlb2_cmd_response response;
+	/* Input parameters */
+	__u32 cos_id;
+	__u32 padding0;
+};
+
+/*
+ * DLB2_CMD_GET_SN_OCCUPANCY: Get a sequence number group's occupancy
+ *
+ * Each sequence number group has one or more slots, depending on its
+ * configuration. I.e.:
+ * - If configured for 1024 sequence numbers per queue, the group has 1 slot
+ * - If configured for 512 sequence numbers per queue, the group has 2 slots
+ *   ...
+ * - If configured for 32 sequence numbers per queue, the group has 32 slots
+ *
+ * This ioctl returns the group's number of in-use slots. If its occupancy is
+ * 0, the group's sequence number allocation can be reconfigured.
+ *
+ * Input parameters:
+ * - group: Sequence number group ID.
+ * - padding0: Reserved for future use.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ *	ioctl request arg is invalid, the driver won't set status.
+ * - response.id: Specified group's number of used slots.
+ */
+struct dlb2_get_sn_occupancy_args {
+	/* Output parameters */
+	struct dlb2_cmd_response response;
+	/* Input parameters */
+	__u32 group;
+	__u32 padding0;
+};
+
+enum dlb2_cq_poll_modes {
+	DLB2_CQ_POLL_MODE_STD,
+	DLB2_CQ_POLL_MODE_SPARSE,
+
+	/* NUM_DLB2_CQ_POLL_MODE must be last */
+	NUM_DLB2_CQ_POLL_MODE,
+};
+
+/*
+ * DLB2_CMD_QUERY_CQ_POLL_MODE: Query the CQ poll mode setting
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ *	ioctl request arg is invalid, the driver won't set status.
+ * - response.id: CQ poll mode (see enum dlb2_cq_poll_modes).
+ */
+struct dlb2_query_cq_poll_mode_args {
+	/* Output parameters */
+	struct dlb2_cmd_response response;
+};
+
+enum dlb2_user_interface_commands {
+	DLB2_CMD_GET_DEVICE_VERSION,
+	DLB2_CMD_CREATE_SCHED_DOMAIN,
+	DLB2_CMD_GET_NUM_RESOURCES,
+	DLB2_CMD_SET_SN_ALLOCATION,
+	DLB2_CMD_GET_SN_ALLOCATION,
+	DLB2_CMD_SET_COS_BW,
+	DLB2_CMD_GET_COS_BW,
+	DLB2_CMD_GET_SN_OCCUPANCY,
+	DLB2_CMD_QUERY_CQ_POLL_MODE,
+
+	/* NUM_DLB2_CMD must be last */
+	NUM_DLB2_CMD,
+};
+
+/*******************************/
+/* 'domain' device file alerts */
+/*******************************/
+
+/*
+ * Scheduling domain device files can be read to receive domain-specific
+ * notifications, for alerts such as hardware errors or device reset.
+ *
+ * Each alert is encoded in a 16B message. The first 8B contains the alert ID,
+ * and the second 8B is optional and contains additional information.
+ * Applications should cast read data to a struct dlb2_domain_alert, and
+ * interpret the struct's alert_id according to dlb2_domain_alert_id. The read
+ * length must be 16B, or the function will return -EINVAL.
+ *
+ * Reads are destructive, and in the case of multiple file descriptors for the
+ * same domain device file, an alert will be read by only one of the file
+ * descriptors.
+ *
+ * The driver stores alerts in a fixed-size alert ring until they are read. If
+ * the alert ring fills completely, subsequent alerts will be dropped. It is
+ * recommended that DLB2 applications dedicate a thread to perform blocking
+ * reads on the device file.
+ */
+enum dlb2_domain_alert_id {
+	/*
+	 * Software issued an illegal enqueue for a port in this domain. An
+	 * illegal enqueue could be:
+	 * - Illegal (excess) completion
+	 * - Illegal fragment
+	 * - Insufficient credits
+	 * aux_alert_data[7:0] contains the port ID, and aux_alert_data[15:8]
+	 * contains a flag indicating whether the port is load-balanced (1) or
+	 * directed (0).
+	 */
+	DLB2_DOMAIN_ALERT_PP_ILLEGAL_ENQ,
+	/*
+	 * Software issued excess CQ token pops for a port in this domain.
+	 * aux_alert_data[7:0] contains the port ID, and aux_alert_data[15:8]
+	 * contains a flag indicating whether the port is load-balanced (1) or
+	 * directed (0).
+	 */
+	DLB2_DOMAIN_ALERT_PP_EXCESS_TOKEN_POPS,
+	/*
+	 * A enqueue contained either an invalid command encoding or a REL,
+	 * REL_T, RLS, FWD, FWD_T, FRAG, or FRAG_T from a directed port.
+	 *
+	 * aux_alert_data[7:0] contains the port ID, and aux_alert_data[15:8]
+	 * contains a flag indicating whether the port is load-balanced (1) or
+	 * directed (0).
+	 */
+	DLB2_DOMAIN_ALERT_ILLEGAL_HCW,
+	/*
+	 * The QID must be valid and less than 128.
+	 *
+	 * aux_alert_data[7:0] contains the port ID, and aux_alert_data[15:8]
+	 * contains a flag indicating whether the port is load-balanced (1) or
+	 * directed (0).
+	 */
+	DLB2_DOMAIN_ALERT_ILLEGAL_QID,
+	/*
+	 * An enqueue went to a disabled QID.
+	 *
+	 * aux_alert_data[7:0] contains the port ID, and aux_alert_data[15:8]
+	 * contains a flag indicating whether the port is load-balanced (1) or
+	 * directed (0).
+	 */
+	DLB2_DOMAIN_ALERT_DISABLED_QID,
+	/*
+	 * The device containing this domain was reset. All applications using
+	 * the device need to exit for the driver to complete the reset
+	 * procedure.
+	 *
+	 * aux_alert_data doesn't contain any information for this alert.
+	 */
+	DLB2_DOMAIN_ALERT_DEVICE_RESET,
+	/*
+	 * User-space has enqueued an alert.
+	 *
+	 * aux_alert_data contains user-provided data.
+	 */
+	DLB2_DOMAIN_ALERT_USER,
+	/*
+	 * The watchdog timer fired for the specified port. This occurs if its
+	 * CQ was not serviced for a large amount of time, likely indicating a
+	 * hung thread.
+	 * aux_alert_data[7:0] contains the port ID, and aux_alert_data[15:8]
+	 * contains a flag indicating whether the port is load-balanced (1) or
+	 * directed (0).
+	 */
+	DLB2_DOMAIN_ALERT_CQ_WATCHDOG_TIMEOUT,
+
+	/* Number of DLB2 domain alerts */
+	NUM_DLB2_DOMAIN_ALERTS
+};
+
+static const char dlb2_domain_alert_strings[][128] = {
+	"DLB2_DOMAIN_ALERT_PP_ILLEGAL_ENQ",
+	"DLB2_DOMAIN_ALERT_PP_EXCESS_TOKEN_POPS",
+	"DLB2_DOMAIN_ALERT_ILLEGAL_HCW",
+	"DLB2_DOMAIN_ALERT_ILLEGAL_QID",
+	"DLB2_DOMAIN_ALERT_DISABLED_QID",
+	"DLB2_DOMAIN_ALERT_DEVICE_RESET",
+	"DLB2_DOMAIN_ALERT_USER",
+	"DLB2_DOMAIN_ALERT_CQ_WATCHDOG_TIMEOUT",
+};
+
+struct dlb2_domain_alert {
+	__u64 alert_id;
+	__u64 aux_alert_data;
+};
+
+/*********************************/
+/* 'domain' device file commands */
+/*********************************/
+
+/*
+ * DLB2_DOMAIN_CMD_CREATE_LDB_QUEUE: Configure a load-balanced queue.
+ * Input parameters:
+ * - num_atomic_inflights: This specifies the amount of temporary atomic QE
+ *	storage for this queue. If zero, the queue will not support atomic
+ *	scheduling.
+ * - num_sequence_numbers: This specifies the number of sequence numbers used
+ *	by this queue. If zero, the queue will not support ordered scheduling.
+ *	If non-zero, the queue will not support unordered scheduling.
+ * - num_qid_inflights: The maximum number of QEs that can be inflight
+ *	(scheduled to a CQ but not completed) at any time. If
+ *	num_sequence_numbers is non-zero, num_qid_inflights must be set equal
+ *	to num_sequence_numbers.
+ * - lock_id_comp_level: Lock ID compression level. Specifies the number of
+ *	unique lock IDs the queue should compress down to. Valid compression
+ *	levels: 0, 64, 128, 256, 512, 1k, 2k, 4k, 64k. If lock_id_comp_level is
+ *	0, the queue won't compress its lock IDs.
+ * - depth_threshold: DLB sets two bits in the received QE to indicate the
+ *	depth of the queue relative to the threshold before scheduling the
+ *	QE to a CQ:
+ *	- 2’b11: depth > threshold
+ *	- 2’b10: threshold >= depth > 0.75 * threshold
+ *	- 2’b01: 0.75 * threshold >= depth > 0.5 * threshold
+ *	- 2’b00: depth <= 0.5 * threshold
+ * - padding0: Reserved for future use.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ *	ioctl request arg is invalid, the driver won't set status.
+ * - response.id: Queue ID.
+ */
+struct dlb2_create_ldb_queue_args {
+	/* Output parameters */
+	struct dlb2_cmd_response response;
+	/* Input parameters */
+	__u32 num_sequence_numbers;
+	__u32 num_qid_inflights;
+	__u32 num_atomic_inflights;
+	__u32 lock_id_comp_level;
+	__u32 depth_threshold;
+	__u32 padding0;
+};
+
+/*
+ * DLB2_DOMAIN_CMD_CREATE_DIR_QUEUE: Configure a directed queue.
+ * Input parameters:
+ * - port_id: Port ID. If the corresponding directed port is already created,
+ *	specify its ID here. Else this argument must be 0xFFFFFFFF to indicate
+ *	that the queue is being created before the port.
+ * - depth_threshold: DLB sets two bits in the received QE to indicate the
+ *	depth of the queue relative to the threshold before scheduling the
+ *	QE to a CQ:
+ *	- 2’b11: depth > threshold
+ *	- 2’b10: threshold >= depth > 0.75 * threshold
+ *	- 2’b01: 0.75 * threshold >= depth > 0.5 * threshold
+ *	- 2’b00: depth <= 0.5 * threshold
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ *	ioctl request arg is invalid, the driver won't set status.
+ * - response.id: Queue ID.
+ */
+struct dlb2_create_dir_queue_args {
+	/* Output parameters */
+	struct dlb2_cmd_response response;
+	/* Input parameters */
+	__s32 port_id;
+	__u32 depth_threshold;
+};
+
+/*
+ * DLB2_DOMAIN_CMD_CREATE_LDB_PORT: Configure a load-balanced port.
+ * Input parameters:
+ * - cq_depth: Depth of the port's CQ. Must be a power-of-two between 8 and
+ *	1024, inclusive.
+ * - cq_depth_threshold: CQ depth interrupt threshold. A value of N means that
+ *	the CQ interrupt won't fire until there are N or more outstanding CQ
+ *	tokens.
+ * - num_hist_list_entries: Number of history list entries. This must be
+ *	greater than or equal cq_depth.
+ * - cos_id: class-of-service to allocate this port from. Must be between 0 and
+ *	3, inclusive.
+ * - cos_strict: If set, return an error if there are no available ports in the
+ *	requested class-of-service. Else, allocate the port from a different
+ *	class-of-service if the requested class has no available ports.
+ *
+ * - padding0: Reserved for future use.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ *	ioctl request arg is invalid, the driver won't set status.
+ * - response.id: port ID.
+ */
+
+struct dlb2_create_ldb_port_args {
+	/* Output parameters */
+	struct dlb2_cmd_response response;
+	/* Input parameters */
+	__u16 cq_depth;
+	__u16 cq_depth_threshold;
+	__u16 cq_history_list_size;
+	__u8 cos_id;
+	__u8 cos_strict;
+};
+
+/*
+ * DLB2_DOMAIN_CMD_CREATE_DIR_PORT: Configure a directed port.
+ * Input parameters:
+ * - cq_depth: Depth of the port's CQ. Must be a power-of-two between 8 and
+ *	1024, inclusive.
+ * - cq_depth_threshold: CQ depth interrupt threshold. A value of N means that
+ *	the CQ interrupt won't fire until there are N or more outstanding CQ
+ *	tokens.
+ * - qid: Queue ID. If the corresponding directed queue is already created,
+ *	specify its ID here. Else this argument must be 0xFFFFFFFF to indicate
+ *	that the port is being created before the queue.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ *	ioctl request arg is invalid, the driver won't set status.
+ * - response.id: Port ID.
+ */
+struct dlb2_create_dir_port_args {
+	/* Output parameters */
+	struct dlb2_cmd_response response;
+	/* Input parameters */
+	__u16 cq_depth;
+	__u16 cq_depth_threshold;
+	__s32 queue_id;
+};
+
+/*
+ * DLB2_DOMAIN_CMD_START_DOMAIN: Mark the end of the domain configuration. This
+ *	must be called before passing QEs into the device, and no configuration
+ *	ioctls can be issued once the domain has started. Sending QEs into the
+ *	device before calling this ioctl will result in undefined behavior.
+ * Input parameters:
+ * - (None)
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ *	ioctl request arg is invalid, the driver won't set status.
+ */
+struct dlb2_start_domain_args {
+	/* Output parameters */
+	struct dlb2_cmd_response response;
+};
+
+/*
+ * DLB2_DOMAIN_CMD_MAP_QID: Map a load-balanced queue to a load-balanced port.
+ * Input parameters:
+ * - port_id: Load-balanced port ID.
+ * - qid: Load-balanced queue ID.
+ * - priority: Queue->port service priority.
+ * - padding0: Reserved for future use.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ *	ioctl request arg is invalid, the driver won't set status.
+ */
+struct dlb2_map_qid_args {
+	/* Output parameters */
+	struct dlb2_cmd_response response;
+	/* Input parameters */
+	__u32 port_id;
+	__u32 qid;
+	__u32 priority;
+	__u32 padding0;
+};
+
+/*
+ * DLB2_DOMAIN_CMD_UNMAP_QID: Unmap a load-balanced queue to a load-balanced
+ *	port.
+ * Input parameters:
+ * - port_id: Load-balanced port ID.
+ * - qid: Load-balanced queue ID.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ *	ioctl request arg is invalid, the driver won't set status.
+ */
+struct dlb2_unmap_qid_args {
+	/* Output parameters */
+	struct dlb2_cmd_response response;
+	/* Input parameters */
+	__u32 port_id;
+	__u32 qid;
+};
+
+/*
+ * DLB2_DOMAIN_CMD_ENABLE_LDB_PORT: Enable scheduling to a load-balanced port.
+ * Input parameters:
+ * - port_id: Load-balanced port ID.
+ * - padding0: Reserved for future use.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ *	ioctl request arg is invalid, the driver won't set status.
+ */
+struct dlb2_enable_ldb_port_args {
+	/* Output parameters */
+	struct dlb2_cmd_response response;
+	/* Input parameters */
+	__u32 port_id;
+	__u32 padding0;
+};
+
+/*
+ * DLB2_DOMAIN_CMD_ENABLE_DIR_PORT: Enable scheduling to a directed port.
+ * Input parameters:
+ * - port_id: Directed port ID.
+ * - padding0: Reserved for future use.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ *	ioctl request arg is invalid, the driver won't set status.
+ */
+struct dlb2_enable_dir_port_args {
+	/* Output parameters */
+	struct dlb2_cmd_response response;
+	/* Input parameters */
+	__u32 port_id;
+};
+
+/*
+ * DLB2_DOMAIN_CMD_DISABLE_LDB_PORT: Disable scheduling to a load-balanced
+ *	port.
+ * Input parameters:
+ * - port_id: Load-balanced port ID.
+ * - padding0: Reserved for future use.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ *	ioctl request arg is invalid, the driver won't set status.
+ */
+struct dlb2_disable_ldb_port_args {
+	/* Output parameters */
+	struct dlb2_cmd_response response;
+	/* Input parameters */
+	__u32 port_id;
+	__u32 padding0;
+};
+
+/*
+ * DLB2_DOMAIN_CMD_DISABLE_DIR_PORT: Disable scheduling to a directed port.
+ * Input parameters:
+ * - port_id: Directed port ID.
+ * - padding0: Reserved for future use.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ *	ioctl request arg is invalid, the driver won't set status.
+ */
+struct dlb2_disable_dir_port_args {
+	/* Output parameters */
+	struct dlb2_cmd_response response;
+	/* Input parameters */
+	__u32 port_id;
+	__u32 padding0;
+};
+
+/*
+ * DLB2_DOMAIN_CMD_ENQUEUE_DOMAIN_ALERT: Enqueue a domain alert that will be
+ *	read by one reader thread.
+ *
+ * Input parameters:
+ * - aux_alert_data: user-defined auxiliary data.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ *	ioctl request arg is invalid, the driver won't set status.
+ */
+struct dlb2_enqueue_domain_alert_args {
+	/* Output parameters */
+	struct dlb2_cmd_response response;
+	/* Input parameters */
+	__u64 aux_alert_data;
+};
+
+/*
+ * DLB2_DOMAIN_CMD_GET_LDB_QUEUE_DEPTH: Get a load-balanced queue's depth.
+ * Input parameters:
+ * - queue_id: The load-balanced queue ID.
+ * - padding0: Reserved for future use.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ *	ioctl request arg is invalid, the driver won't set status.
+ * - response.id: queue depth.
+ */
+struct dlb2_get_ldb_queue_depth_args {
+	/* Output parameters */
+	struct dlb2_cmd_response response;
+	/* Input parameters */
+	__u32 queue_id;
+	__u32 padding0;
+};
+
+/*
+ * DLB2_DOMAIN_CMD_DIR_QUEUE_DEPTH: Get a directed queue's depth.
+ * Input parameters:
+ * - queue_id: The directed queue ID.
+ * - padding0: Reserved for future use.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ *	ioctl request arg is invalid, the driver won't set status.
+ * - response.id: queue depth.
+ */
+struct dlb2_get_dir_queue_depth_args {
+	/* Output parameters */
+	struct dlb2_cmd_response response;
+	/* Input parameters */
+	__u32 queue_id;
+	__u32 padding0;
+};
+
+/*
+ * DLB2_DOMAIN_CMD_PENDING_PORT_UNMAPS: Get number of queue unmap operations in
+ *	progress for a load-balanced port.
+ *
+ *	Note: This is a snapshot; the number of unmap operations in progress
+ *	is subject to change at any time.
+ *
+ * Input parameters:
+ * - port_id: Load-balanced port ID.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ *	ioctl request arg is invalid, the driver won't set status.
+ * - response.id: number of unmaps in progress.
+ */
+struct dlb2_pending_port_unmaps_args {
+	/* Output parameters */
+	struct dlb2_cmd_response response;
+	/* Input parameters */
+	__u32 port_id;
+	__u32 padding0;
+};
+
+/*
+ * DLB2_CMD_GET_LDB_PORT_PP_FD: Get file descriptor to mmap a load-balanced
+ *	port's producer port (PP).
+ * DLB2_CMD_GET_LDB_PORT_CQ_FD: Get file descriptor to mmap a load-balanced
+ *	port's consumer queue (CQ).
+ *
+ *	The load-balanced port must have been previously created with the ioctl
+ *	DLB2_CMD_CREATE_LDB_PORT. The fd is used to mmap the PP/CQ region.
+ *
+ * DLB2_CMD_GET_DIR_PORT_PP_FD: Get file descriptor to mmap a directed port's
+ *	producer port (PP).
+ * DLB2_CMD_GET_DIR_PORT_CQ_FD: Get file descriptor to mmap a directed port's
+ *	consumer queue (CQ).
+ *
+ *	The directed port must have been previously created with the ioctl
+ *	DLB2_CMD_CREATE_DIR_PORT. The fd is used to mmap PP/CQ region.
+ *
+ * Input parameters:
+ * - port_id: port ID.
+ * - padding0: Reserved for future use.
+ *
+ * Output parameters:
+ * - response.status: Detailed error code. In certain cases, such as if the
+ *	ioctl request arg is invalid, the driver won't set status.
+ * - response.id: fd.
+ */
+struct dlb2_get_port_fd_args {
+	/* Output parameters */
+	struct dlb2_cmd_response response;
+	/* Input parameters */
+	__u32 port_id;
+	__u32 padding0;
+};
+
+enum dlb2_domain_user_interface_commands {
+	DLB2_DOMAIN_CMD_CREATE_LDB_QUEUE,
+	DLB2_DOMAIN_CMD_CREATE_DIR_QUEUE,
+	DLB2_DOMAIN_CMD_CREATE_LDB_PORT,
+	DLB2_DOMAIN_CMD_CREATE_DIR_PORT,
+	DLB2_DOMAIN_CMD_START_DOMAIN,
+	DLB2_DOMAIN_CMD_MAP_QID,
+	DLB2_DOMAIN_CMD_UNMAP_QID,
+	DLB2_DOMAIN_CMD_ENABLE_LDB_PORT,
+	DLB2_DOMAIN_CMD_ENABLE_DIR_PORT,
+	DLB2_DOMAIN_CMD_DISABLE_LDB_PORT,
+	DLB2_DOMAIN_CMD_DISABLE_DIR_PORT,
+	DLB2_DOMAIN_CMD_BLOCK_ON_CQ_INTERRUPT,
+	DLB2_DOMAIN_CMD_ENQUEUE_DOMAIN_ALERT,
+	DLB2_DOMAIN_CMD_GET_LDB_QUEUE_DEPTH,
+	DLB2_DOMAIN_CMD_GET_DIR_QUEUE_DEPTH,
+	DLB2_DOMAIN_CMD_PENDING_PORT_UNMAPS,
+	DLB2_DOMAIN_CMD_GET_LDB_PORT_PP_FD,
+	DLB2_DOMAIN_CMD_GET_LDB_PORT_CQ_FD,
+	DLB2_DOMAIN_CMD_GET_DIR_PORT_PP_FD,
+	DLB2_DOMAIN_CMD_GET_DIR_PORT_CQ_FD,
+
+	/* NUM_DLB2_DOMAIN_CMD must be last */
+	NUM_DLB2_DOMAIN_CMD,
+};
+
+/*
+ * Mapping sizes for memory mapping the consumer queue (CQ) memory space, and
+ * producer port (PP) MMIO space.
+ */
+#define DLB2_CQ_SIZE 65536
+#define DLB2_PP_SIZE 4096
+
+
+#endif /* __DLB2_USER_H */
-- 
2.6.4


  parent reply index

Thread overview: 366+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-11 20:26 [dpdk-dev] [PATCH 00/22] Add DLB2 PMD Timothy McDaniel
2020-09-11 20:26 ` [dpdk-dev] [PATCH 01/22] event/dlb2: add meson build infrastructure Timothy McDaniel
2020-10-06 15:58   ` Eads, Gage
2020-10-17 18:20   ` [dpdk-dev] [PATCH v2 00/22] Add DLB2 PMD Timothy McDaniel
2020-10-17 18:20     ` [dpdk-dev] [PATCH v2 01/22] event/dlb2: add documentation and meson build infrastructure Timothy McDaniel
2020-10-18  8:48       ` Jerin Jacob
2020-10-19  8:33         ` Bruce Richardson
2020-10-20 15:17           ` McDaniel, Timothy
2020-10-20 15:20             ` Thomas Monjalon
2020-10-20 15:33               ` McDaniel, Timothy
2020-10-20 15:38                 ` Bruce Richardson
2020-10-20 15:34             ` Bruce Richardson
2020-10-20 15:43               ` McDaniel, Timothy
2020-10-21 16:33           ` McDaniel, Timothy
2020-10-20 14:07         ` McDaniel, Timothy
2020-10-19  9:59       ` Kinsella, Ray
2020-10-30  9:43       ` [dpdk-dev] [PATCH v5 00/23] Add DLB2 PMD Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 01/23] event/dlb2: add documentation and meson build infrastructure Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 02/23] event/dlb2: add dynamic logging Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 03/23] event/dlb2: add private data structures and constants Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 04/23] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 05/23] event/dlb2: add inline functions Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 06/23] event/dlb2: add eventdev probe Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 07/23] event/dlb2: add flexible interface Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 08/23] event/dlb2: add probe-time hardware init Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 09/23] event/dlb2: add xstats Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 10/23] event/dlb2: add infos get and configure Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 11/23] event/dlb2: add queue and port default conf Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 12/23] event/dlb2: add queue setup Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 13/23] event/dlb2: add port setup Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 14/23] event/dlb2: add port link Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 15/23] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 16/23] event/dlb2: add eventdev start Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 17/23] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 18/23] event/dlb2: add dequeue " Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 19/23] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 20/23] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 21/23] event/dlb2: add PMD self-tests Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 22/23] event/dlb2: add queue and port release Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 23/23] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-10-30 10:01         ` [dpdk-dev] [PATCH v5 00/23] Add DLB2 PMD Thomas Monjalon
2020-10-30 10:16           ` McDaniel, Timothy
2020-10-30 10:32             ` Jerin Jacob
2020-10-30 10:43               ` Thomas Monjalon
2020-10-30 11:58             ` McDaniel, Timothy
2020-10-30 13:15               ` Thomas Monjalon
2020-10-30 15:35                 ` McDaniel, Timothy
2020-10-30 15:47                   ` Thomas Monjalon
2020-10-30 16:02                     ` McDaniel, Timothy
2020-10-30 16:42                       ` Thomas Monjalon
2020-10-30 14:21         ` Jerin Jacob
2020-10-30 15:25           ` McDaniel, Timothy
2020-10-30 15:31             ` Jerin Jacob
2020-10-30 16:08               ` Van Haaren, Harry
2020-10-30 16:13                 ` McDaniel, Timothy
2020-10-30 15:33             ` David Marchand
2020-10-30 18:28       ` [dpdk-dev] [PATCH v6 " Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 01/23] event/dlb2: add documentation and meson build infrastructure Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 02/23] event/dlb2: add dynamic logging Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 03/23] event/dlb2: add private data structures and constants Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 04/23] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 05/23] event/dlb2: add inline functions Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 06/23] event/dlb2: add eventdev probe Timothy McDaniel
2020-10-30 19:51           ` Eads, Gage
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 07/23] event/dlb2: add flexible interface Timothy McDaniel
2020-10-30 19:51           ` Eads, Gage
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 08/23] event/dlb2: add probe-time hardware init Timothy McDaniel
2020-10-30 19:50           ` Eads, Gage
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 09/23] event/dlb2: add xstats Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 10/23] event/dlb2: add infos get and configure Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 11/23] event/dlb2: add queue and port default conf Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 12/23] event/dlb2: add queue setup Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 13/23] event/dlb2: add port setup Timothy McDaniel
2020-10-30 18:50           ` Eads, Gage
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 14/23] event/dlb2: add port link Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 15/23] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-10-30 18:29         ` [dpdk-dev] [PATCH v6 16/23] event/dlb2: add eventdev start Timothy McDaniel
2020-10-30 18:29         ` [dpdk-dev] [PATCH v6 17/23] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-10-30 18:29         ` [dpdk-dev] [PATCH v6 18/23] event/dlb2: add dequeue " Timothy McDaniel
2020-10-30 18:29         ` [dpdk-dev] [PATCH v6 19/23] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-10-30 18:29         ` [dpdk-dev] [PATCH v6 20/23] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-10-30 18:29         ` [dpdk-dev] [PATCH v6 21/23] event/dlb2: add PMD self-tests Timothy McDaniel
2020-10-30 18:29         ` [dpdk-dev] [PATCH v6 22/23] event/dlb2: add queue and port release Timothy McDaniel
2020-10-30 18:29         ` [dpdk-dev] [PATCH v6 23/23] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-10-30 23:51       ` [dpdk-dev] [PATCH v7 00/23] Add DLB2 PMD Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 01/23] event/dlb2: add documentation and meson build infrastructure Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 02/23] event/dlb2: add dynamic logging Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 03/23] event/dlb2: add private data structures and constants Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 04/23] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 05/23] event/dlb2: add inline functions Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 06/23] event/dlb2: add eventdev probe Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 07/23] event/dlb2: add flexible interface Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 08/23] event/dlb2: add probe-time hardware init Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 09/23] event/dlb2: add xstats Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 10/23] event/dlb2: add infos get and configure Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 11/23] event/dlb2: add queue and port default conf Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 12/23] event/dlb2: add queue setup Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 13/23] event/dlb2: add port setup Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 14/23] event/dlb2: add port link Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 15/23] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 16/23] event/dlb2: add eventdev start Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 17/23] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 18/23] event/dlb2: add dequeue " Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 19/23] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 20/23] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 21/23] event/dlb2: add PMD self-tests Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 22/23] event/dlb2: add queue and port release Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 23/23] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-10-31  2:01       ` [dpdk-dev] [PATCH v8 00/23] Add DLB2 PMD Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 01/23] event/dlb2: add documentation and meson build infrastructure Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 02/23] event/dlb2: add dynamic logging Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 03/23] event/dlb2: add private data structures and constants Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 04/23] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 05/23] event/dlb2: add inline functions Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 06/23] event/dlb2: add eventdev probe Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 07/23] event/dlb2: add flexible interface Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 08/23] event/dlb2: add probe-time hardware init Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 09/23] event/dlb2: add xstats Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 10/23] event/dlb2: add infos get and configure Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 11/23] event/dlb2: add queue and port default conf Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 12/23] event/dlb2: add queue setup Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 13/23] event/dlb2: add port setup Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 14/23] event/dlb2: add port link Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 15/23] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 16/23] event/dlb2: add eventdev start Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 17/23] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-10-31  9:52           ` Jerin Jacob
2020-10-31 17:13             ` McDaniel, Timothy
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 18/23] event/dlb2: add dequeue " Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 19/23] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 20/23] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-10-31 10:51           ` David Marchand
2020-10-31 16:37             ` McDaniel, Timothy
2020-10-31 19:19               ` McDaniel, Timothy
2020-10-31 21:38                 ` David Marchand
2020-10-31 21:43                   ` McDaniel, Timothy
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 21/23] event/dlb2: add PMD self-tests Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 22/23] event/dlb2: add queue and port release Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 23/23] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-10-31 17:25       ` [dpdk-dev] [PATCH v9 00/23] Add DLB2 PMD Timothy McDaniel
2020-10-31 17:25         ` [dpdk-dev] [PATCH v9 01/23] event/dlb2: add documentation and meson build infrastructure Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 02/23] event/dlb2: add dynamic logging Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 03/23] event/dlb2: add private data structures and constants Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 04/23] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 05/23] event/dlb2: add inline functions Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 06/23] event/dlb2: add eventdev probe Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 07/23] event/dlb2: add flexible interface Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 08/23] event/dlb2: add probe-time hardware init Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 09/23] event/dlb2: add xstats Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 10/23] event/dlb2: add infos get and configure Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 11/23] event/dlb2: add queue and port default conf Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 12/23] event/dlb2: add queue setup Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 13/23] event/dlb2: add port setup Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 14/23] event/dlb2: add port link Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 15/23] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 16/23] event/dlb2: add eventdev start Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 17/23] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 18/23] event/dlb2: add dequeue " Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 19/23] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 20/23] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 21/23] event/dlb2: add PMD self-tests Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 22/23] event/dlb2: add queue and port release Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 23/23] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-11-01 20:00       ` [dpdk-dev] [PATCH v10 00/23] Add DLB2 PMD Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 01/23] event/dlb2: add documentation and meson build infrastructure Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 02/23] event/dlb2: add dynamic logging Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 03/23] event/dlb2: add private data structures and constants Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 04/23] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 05/23] event/dlb2: add inline functions Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 06/23] event/dlb2: add eventdev probe Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 07/23] event/dlb2: add flexible interface Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 08/23] event/dlb2: add probe-time hardware init Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 09/23] event/dlb2: add xstats Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 10/23] event/dlb2: add infos get and configure Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 11/23] event/dlb2: add queue and port default conf Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 12/23] event/dlb2: add queue setup Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 13/23] event/dlb2: add port setup Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 14/23] event/dlb2: add port link Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 15/23] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 16/23] event/dlb2: add eventdev start Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 17/23] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 18/23] event/dlb2: add dequeue " Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 19/23] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 20/23] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 21/23] event/dlb2: add PMD self-tests Timothy McDaniel
2020-11-01 20:01         ` [dpdk-dev] [PATCH v10 22/23] event/dlb2: add queue and port release Timothy McDaniel
2020-11-01 20:01         ` [dpdk-dev] [PATCH v10 23/23] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-11-01 23:37       ` [dpdk-dev] [PATCH v11 00/23] Add DLB2 PMD Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 01/23] event/dlb2: add documentation and meson build infrastructure Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 02/23] event/dlb2: add dynamic logging Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 03/23] event/dlb2: add private data structures and constants Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 04/23] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 05/23] event/dlb2: add inline functions Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 06/23] event/dlb2: add eventdev probe Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 07/23] event/dlb2: add flexible interface Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 08/23] event/dlb2: add probe-time hardware init Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 09/23] event/dlb2: add xstats Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 10/23] event/dlb2: add infos get and configure Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 11/23] event/dlb2: add queue and port default conf Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 12/23] event/dlb2: add queue setup Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 13/23] event/dlb2: add port setup Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 14/23] event/dlb2: add port link Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 15/23] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 16/23] event/dlb2: add eventdev start Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 17/23] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 18/23] event/dlb2: add dequeue " Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 19/23] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-11-01 23:38         ` [dpdk-dev] [PATCH v11 20/23] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-11-01 23:38         ` [dpdk-dev] [PATCH v11 21/23] event/dlb2: add PMD self-tests Timothy McDaniel
2020-11-01 23:38         ` [dpdk-dev] [PATCH v11 22/23] event/dlb2: add queue and port release Timothy McDaniel
2020-11-01 23:38         ` [dpdk-dev] [PATCH v11 23/23] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-11-02  8:49         ` [dpdk-dev] [PATCH v11 00/23] Add DLB2 PMD Jerin Jacob
2020-10-17 18:20     ` [dpdk-dev] [PATCH v2 02/22] event/dlb2: add dynamic logging Timothy McDaniel
2020-10-18  8:57       ` Jerin Jacob
2020-10-20 14:08         ` McDaniel, Timothy
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 03/22] event/dlb2: add private data structures and constants Timothy McDaniel
2020-10-20 14:01       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 04/22] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 05/22] event/dlb2: add inline functions Timothy McDaniel
2020-10-18  8:59       ` Jerin Jacob
2020-10-20 14:08         ` McDaniel, Timothy
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 06/22] event/dlb2: add probe Timothy McDaniel
2020-10-18  8:39       ` Jerin Jacob
2020-10-20 14:04         ` McDaniel, Timothy
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 07/22] event/dlb2: add xstats Timothy McDaniel
2020-10-20 14:01       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 08/22] event/dlb2: add infos get and configure Timothy McDaniel
2020-10-20 14:01       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 09/22] event/dlb2: add queue and port default conf Timothy McDaniel
2020-10-20 14:02       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 10/22] event/dlb2: add queue setup Timothy McDaniel
2020-10-20 14:01       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 11/22] event/dlb2: add port setup Timothy McDaniel
2020-10-20 14:02       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 12/22] event/dlb2: add port link Timothy McDaniel
2020-10-20 14:02       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 13/22] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 14/22] event/dlb2: add eventdev start Timothy McDaniel
2020-10-20 14:04       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 15/22] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 16/22] event/dlb2: add dequeue " Timothy McDaniel
2020-10-20 14:04       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 17/22] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-10-20 14:04       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 18/22] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-10-18  9:13       ` Jerin Jacob
2020-10-20 14:12         ` McDaniel, Timothy
2020-10-19 10:01       ` Kinsella, Ray
2020-10-20 14:05       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 19/22] event/dlb2: add PMD self-tests Timothy McDaniel
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 20/22] event/dlb2: add queue and port release Timothy McDaniel
2020-10-20 14:04       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 21/22] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 22/22] doc: add new DLB2 eventdev driver to relnotes Timothy McDaniel
2020-10-18  9:22       ` Jerin Jacob
2020-10-20 14:13         ` McDaniel, Timothy
2020-10-24 13:06     ` [dpdk-dev] [PATCH v2 00/22] Add DLB2 PMD Thomas Monjalon
2020-10-23 18:30   ` [dpdk-dev] [PATCH v3 00/23] " Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 01/23] event/dlb2: add documentation and meson build infrastructure Timothy McDaniel
2020-10-24 12:58       ` Jerin Jacob
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 02/23] event/dlb2: add dynamic logging Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 03/23] event/dlb2: add private data structures and constants Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 04/23] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 05/23] event/dlb2: add inline functions Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 06/23] event/dlb2: add eventdev probe Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 07/23] event/dlb2: add flexible interface Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 08/23] event/dlb2: add probe-time hardware init Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 09/23] event/dlb2: add xstats Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 10/23] event/dlb2: add infos get and configure Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 11/23] event/dlb2: add queue and port default conf Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 12/23] event/dlb2: add queue setup Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 13/23] event/dlb2: add port setup Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 14/23] event/dlb2: add port link Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 15/23] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 16/23] event/dlb2: add eventdev start Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 17/23] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 18/23] event/dlb2: add dequeue " Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 19/23] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 20/23] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 21/23] event/dlb2: add PMD self-tests Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 22/23] event/dlb2: add queue and port release Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 23/23] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-10-29 15:24   ` [dpdk-dev] [PATCH v4 00/23] Add DLB2 PMD Timothy McDaniel
2020-10-29 15:24     ` [dpdk-dev] [PATCH v4 01/23] event/dlb2: add documentation and meson build infrastructure Timothy McDaniel
2020-10-29 15:24     ` [dpdk-dev] [PATCH v4 02/23] event/dlb2: add dynamic logging Timothy McDaniel
2020-10-29 15:24     ` [dpdk-dev] [PATCH v4 03/23] event/dlb2: add private data structures and constants Timothy McDaniel
2020-10-29 15:29       ` Stephen Hemminger
2020-10-29 16:07         ` McDaniel, Timothy
2020-10-29 15:30       ` Stephen Hemminger
2020-10-29 16:10         ` McDaniel, Timothy
2020-10-29 15:24     ` [dpdk-dev] [PATCH v4 04/23] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-10-29 15:24     ` [dpdk-dev] [PATCH v4 05/23] event/dlb2: add inline functions Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 06/23] event/dlb2: add eventdev probe Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 07/23] event/dlb2: add flexible interface Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 08/23] event/dlb2: add probe-time hardware init Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 09/23] event/dlb2: add xstats Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 10/23] event/dlb2: add infos get and configure Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 11/23] event/dlb2: add queue and port default conf Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 12/23] event/dlb2: add queue setup Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 13/23] event/dlb2: add port setup Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 14/23] event/dlb2: add port link Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 15/23] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 16/23] event/dlb2: add eventdev start Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 17/23] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 18/23] event/dlb2: add dequeue " Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 19/23] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 20/23] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 21/23] event/dlb2: add PMD self-tests Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 22/23] event/dlb2: add queue and port release Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 23/23] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-09-11 20:26 ` [dpdk-dev] [PATCH 02/22] event/dlb2: add dynamic logging Timothy McDaniel
2020-10-06 16:52   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 03/22] event/dlb2: add private data structures and constants Timothy McDaniel
2020-10-06 16:52   ` Eads, Gage
2020-10-07 16:14   ` Eads, Gage
2020-09-11 20:26 ` Timothy McDaniel [this message]
2020-10-06 19:26   ` [dpdk-dev] [PATCH 04/22] event/dlb2: add definitions shared with LKM or shared code Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 05/22] event/dlb2: add inline functions Timothy McDaniel
2020-10-06 21:33   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 06/22] event/dlb2: add probe Timothy McDaniel
2020-10-07 16:56   ` Eads, Gage
2020-10-18  9:05   ` Jerin Jacob
2020-10-20 14:11     ` McDaniel, Timothy
2020-09-11 20:26 ` [dpdk-dev] [PATCH 07/22] event/dlb2: add xstats Timothy McDaniel
2020-09-17 20:58   ` Chen, Mike Ximing
2020-09-17 21:26     ` McDaniel, Timothy
2020-09-18  0:37       ` Chen, Mike Ximing
2020-09-18  8:39         ` Bruce Richardson
2020-10-07 18:47   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 08/22] event/dlb2: add infos get and configure Timothy McDaniel
2020-10-07 19:14   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 09/22] event/dlb2: add queue and port default conf Timothy McDaniel
2020-10-07 19:15   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 10/22] event/dlb2: add queue setup Timothy McDaniel
2020-10-07 19:26   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 11/22] event/dlb2: add port setup Timothy McDaniel
2020-10-07 20:34   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 12/22] event/dlb2: add port link Timothy McDaniel
2020-10-07 20:40   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 13/22] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-10-07 20:44   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 14/22] event/dlb2: add eventdev start Timothy McDaniel
2020-10-07 20:51   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 15/22] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-10-07 21:02   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 16/22] event/dlb2: add dequeue " Timothy McDaniel
2020-10-07 21:18   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 17/22] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-10-07 21:21   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 18/22] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-10-07 21:24   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 19/22] event/dlb2: add PMD self-tests Timothy McDaniel
2020-10-07 21:33   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 20/22] event/dlb2: add queue and port release Timothy McDaniel
2020-10-07 21:55   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 21/22] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-10-07 21:58   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 22/22] doc: add new DLB2 eventdev driver to relnotes Timothy McDaniel
2020-10-07 22:04   ` Eads, Gage
2020-09-21 17:11 ` [dpdk-dev] [PATCH 00/22] Add DLB2 PMD Jerin Jacob
2020-09-21 17:15   ` McDaniel, Timothy
2020-09-29 18:41     ` Jerin Jacob
2020-09-29 18:46       ` McDaniel, Timothy
2020-09-30 16:10       ` McDaniel, Timothy
2020-09-29 18:46 ` Jerin Jacob
2020-09-30 16:14   ` McDaniel, Timothy

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1599855987-25976-5-git-send-email-timothy.mcdaniel@intel.com \
    --to=timothy.mcdaniel@intel.com \
    --cc=dev@dpdk.org \
    --cc=erik.g.carrillo@intel.com \
    --cc=gage.eads@intel.com \
    --cc=harry.van.haaren@intel.com \
    --cc=jerinj@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK patches and discussions

Archives are clonable:
	git clone --mirror http://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ http://inbox.dpdk.org/dev \
		dev@dpdk.org
	public-inbox-index dev


Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/ public-inbox