DPDK patches and discussions
 help / color / Atom feed
From: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
To: dev@dpdk.org
Cc: thomasm@monjalon.net, stephen@networkplumber.org,
	ferruh.yigit@intel.com,  olivier.matz@6wind.com,
	jerinjacobk@gmail.com, maxime.coquelin@redhat.com,
	david.marchand@redhat.com, arybchenko@solarflare.com
Subject: [dpdk-dev] [PATCH v2 7/9] net/mlx5: configure Rx queue to support split
Date: Wed,  7 Oct 2020 15:06:53 +0000
Message-ID: <1602083215-22921-8-git-send-email-viacheslavo@nvidia.com> (raw)
In-Reply-To: <1602083215-22921-1-git-send-email-viacheslavo@nvidia.com>

The scatter-gather elements should be configured
accordingly to support the buffer split feature.
The application provides the desired settings for
the segments at the beginning of the packets and
PMD pads the buffer chain (if needed) with attributes
of last specified segment to accommodate the packet
of maximal length.

There are some limitations are implied. The MPRQ
feature should be disengaged if split is requested,
due to MPRQ neither supports pushing data to the
dedicated pools nor follows the flexible buffer sizes.
The vectorized rx_burst routines does not support
the scattering (these ones are extremely simplified
and work over the single segment only) and can't
handle split as well.

Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
---
 drivers/net/mlx5/mlx5_rxq.c | 94 ++++++++++++++++++++++++++++++++++++++-------
 1 file changed, 80 insertions(+), 14 deletions(-)

diff --git a/drivers/net/mlx5/mlx5_rxq.c b/drivers/net/mlx5/mlx5_rxq.c
index 24a247c..44be6df 100644
--- a/drivers/net/mlx5/mlx5_rxq.c
+++ b/drivers/net/mlx5/mlx5_rxq.c
@@ -1417,7 +1417,8 @@ struct mlx5_rxq_ctrl *
 	uint64_t offloads = conf->offloads |
 			   dev->data->dev_conf.rxmode.offloads;
 	unsigned int lro_on_queue = !!(offloads & DEV_RX_OFFLOAD_TCP_LRO);
-	const int mprq_en = mlx5_check_mprq_support(dev) > 0 && n_seg == 1;
+	const int mprq_en = mlx5_check_mprq_support(dev) > 0 && n_seg == 1 &&
+			    !rx_seg[0].offset && !rx_seg[0].length;
 	unsigned int max_rx_pkt_len = lro_on_queue ?
 			dev->data->dev_conf.rxmode.max_lro_pkt_size :
 			dev->data->dev_conf.rxmode.max_rx_pkt_len;
@@ -1425,22 +1426,87 @@ struct mlx5_rxq_ctrl *
 							RTE_PKTMBUF_HEADROOM;
 	unsigned int max_lro_size = 0;
 	unsigned int first_mb_free_size = mb_len - RTE_PKTMBUF_HEADROOM;
+	const struct rte_eth_rxseg *qs_seg = rx_seg;
+	unsigned int tail_len;
 
-	if (non_scatter_min_mbuf_size > mb_len && !(offloads &
-						    DEV_RX_OFFLOAD_SCATTER)) {
+	tmpl = mlx5_malloc(MLX5_MEM_RTE | MLX5_MEM_ZERO, sizeof(*tmpl) +
+			   desc_n * sizeof(struct rte_mbuf *), 0, socket);
+	if (!tmpl) {
+		rte_errno = ENOMEM;
+		return NULL;
+	}
+	MLX5_ASSERT(n_seg && n_seg <= MLX5_MAX_RXQ_NSEG);
+	/*
+	 * Build the array of actual buffer offsets and lengths.
+	 * Pad with the buffers from the last memory pool if
+	 * needed to handle max size packets, replace zero length
+	 * with the buffer length from the pool.
+	 */
+	tail_len = max_rx_pkt_len;
+	do {
+		struct rte_eth_rxseg *hw_seg =
+					&tmpl->rxq.rxseg[tmpl->rxq.rxseg_n];
+		uint32_t buf_len = rte_pktmbuf_data_room_size(qs_seg->mp);
+		uint32_t offset, seg_len;
+
+		/*
+		 * For the buffers beyond descriptions offset is zero,
+		 * the first buffer contains head room.
+		 */
+		offset = (tmpl->rxq.rxseg_n >= n_seg ? 0 : qs_seg->offset) +
+			 (tmpl->rxq.rxseg_n ? 0 : RTE_PKTMBUF_HEADROOM);
+		/*
+		 * For the buffers beyond descriptions the length is
+		 * pool buffer length, zero lengths are replaced with
+		 * pool buffer length either.
+		 */
+		seg_len = tmpl->rxq.rxseg_n >= n_seg ? buf_len :
+			  qs_seg->length ? qs_seg->length : (buf_len - offset);
+		/* Check is done in long int, now overflows. */
+		if (buf_len < seg_len + offset) {
+			DRV_LOG(ERR, "port %u Rx queue %u: Split offset/length "
+				     "%u/%u can't be satisfied",
+				     dev->data->port_id, idx,
+				     qs_seg->length, qs_seg->offset);
+			rte_errno = EINVAL;
+			goto error;
+		}
+		if (seg_len > tail_len)
+			seg_len = buf_len - offset;
+		if (++tmpl->rxq.rxseg_n > MLX5_MAX_RXQ_NSEG) {
+			DRV_LOG(ERR,
+				"port %u too many SGEs (%u) needed to handle"
+				" requested maximum packet size %u, the maximum"
+				" supported are %u", dev->data->port_id,
+				tmpl->rxq.rxseg_n, max_rx_pkt_len,
+				MLX5_MAX_RXQ_NSEG);
+			rte_errno = ENOTSUP;
+			goto error;
+		}
+		/* Build the actual scattering element in the queue object. */
+		hw_seg->mp = qs_seg->mp;
+		MLX5_ASSERT(offset <= UINT16_MAX);
+		MLX5_ASSERT(seg_len <= UINT16_MAX);
+		hw_seg->offset = (uint16_t)offset;
+		hw_seg->length = (uint16_t)seg_len;
+		/*
+		 * Advance the segment descriptor, the padding is the based
+		 * on the atrtributes of the last descriptor.
+		 */
+		if (tmpl->rxq.rxseg_n < n_seg)
+			qs_seg++;
+		tail_len -= RTE_MIN(tail_len, seg_len);
+	} while (tail_len || !rte_is_power_of_2(tmpl->rxq.rxseg_n));
+	MLX5_ASSERT(tmpl->rxq.rxseg_n &&
+		    tmpl->rxq.rxseg_n <= MLX5_MAX_RXQ_NSEG);
+	if (tmpl->rxq.rxseg_n > 1 && !(offloads & DEV_RX_OFFLOAD_SCATTER)) {
 		DRV_LOG(ERR, "port %u Rx queue %u: Scatter offload is not"
 			" configured and no enough mbuf space(%u) to contain "
 			"the maximum RX packet length(%u) with head-room(%u)",
 			dev->data->port_id, idx, mb_len, max_rx_pkt_len,
 			RTE_PKTMBUF_HEADROOM);
 		rte_errno = ENOSPC;
-		return NULL;
-	}
-	tmpl = mlx5_malloc(MLX5_MEM_RTE | MLX5_MEM_ZERO, sizeof(*tmpl) +
-			   desc_n * sizeof(struct rte_mbuf *), 0, socket);
-	if (!tmpl) {
-		rte_errno = ENOMEM;
-		return NULL;
+		goto error;
 	}
 	tmpl->type = MLX5_RXQ_TYPE_STANDARD;
 	if (mlx5_mr_btree_init(&tmpl->rxq.mr_ctrl.cache_bh,
@@ -1467,7 +1533,7 @@ struct mlx5_rxq_ctrl *
 	 *  - The number of descs is more than the number of strides.
 	 *  - max_rx_pkt_len plus overhead is less than the max size
 	 *    of a stride or mprq_stride_size is specified by a user.
-	 *    Need to nake sure that there are enough stides to encap
+	 *    Need to make sure that there are enough stides to encap
 	 *    the maximum packet size in case mprq_stride_size is set.
 	 *  Otherwise, enable Rx scatter if necessary.
 	 */
@@ -1497,11 +1563,11 @@ struct mlx5_rxq_ctrl *
 			" strd_num_n = %u, strd_sz_n = %u",
 			dev->data->port_id, idx,
 			tmpl->rxq.strd_num_n, tmpl->rxq.strd_sz_n);
-	} else if (max_rx_pkt_len <= first_mb_free_size) {
+	} else if (tmpl->rxq.rxseg_n == 1) {
+		MLX5_ASSERT(max_rx_pkt_len <= first_mb_free_size);
 		tmpl->rxq.sges_n = 0;
 		max_lro_size = max_rx_pkt_len;
 	} else if (offloads & DEV_RX_OFFLOAD_SCATTER) {
-		unsigned int size = non_scatter_min_mbuf_size;
 		unsigned int sges_n;
 
 		if (lro_on_queue && first_mb_free_size <
@@ -1516,7 +1582,7 @@ struct mlx5_rxq_ctrl *
 		 * Determine the number of SGEs needed for a full packet
 		 * and round it to the next power of two.
 		 */
-		sges_n = log2above((size / mb_len) + !!(size % mb_len));
+		sges_n = log2above(tmpl->rxq.rxseg_n);
 		if (sges_n > MLX5_MAX_LOG_RQ_SEGS) {
 			DRV_LOG(ERR,
 				"port %u too many SGEs (%u) needed to handle"
-- 
1.8.3.1


  parent reply index

Thread overview: 172+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-17 17:49 [dpdk-dev] [RFC] ethdev: introduce Rx buffer split Slava Ovsiienko
2020-09-17 16:55 ` Andrew Rybchenko
2020-10-01  8:54   ` Slava Ovsiienko
2020-10-12  8:45     ` Andrew Rybchenko
2020-10-12  9:56       ` Slava Ovsiienko
2020-10-12 15:14         ` Thomas Monjalon
2020-10-12 15:28           ` Ananyev, Konstantin
2020-10-12 15:34             ` Slava Ovsiienko
2020-10-12 15:56               ` Ananyev, Konstantin
2020-10-12 15:59                 ` Slava Ovsiienko
2020-10-12 16:52                 ` Thomas Monjalon
2020-10-12 16:03           ` Andrew Rybchenko
2020-10-12 16:10             ` Slava Ovsiienko
2020-10-13 21:59         ` Ferruh Yigit
2020-10-14  7:17           ` Thomas Monjalon
2020-10-14  7:37           ` Slava Ovsiienko
2020-10-05  6:26 ` [dpdk-dev] [PATCH 0/5] " Viacheslav Ovsiienko
2020-10-05  6:26   ` [dpdk-dev] [PATCH 1/5] " Viacheslav Ovsiienko
2020-10-05  6:26   ` [dpdk-dev] [PATCH 2/5] app/testpmd: add multiple pools per core creation Viacheslav Ovsiienko
2020-10-05  6:26   ` [dpdk-dev] [PATCH 3/5] app/testpmd: add buffer split offload configuration Viacheslav Ovsiienko
2020-10-05  6:26   ` [dpdk-dev] [PATCH 4/5] app/testpmd: add rxpkts commands and parameters Viacheslav Ovsiienko
2020-10-05  6:26   ` [dpdk-dev] [PATCH 5/5] app/testpmd: add extended Rx queue setup Viacheslav Ovsiienko
2020-10-07 15:06 ` [dpdk-dev] [PATCH v2 0/9] ethdev: introduce Rx buffer split Viacheslav Ovsiienko
2020-10-07 15:06   ` [dpdk-dev] [PATCH v2 1/9] " Viacheslav Ovsiienko
2020-10-11 22:17     ` Thomas Monjalon
2020-10-12  9:40       ` Slava Ovsiienko
2020-10-12 10:09         ` Thomas Monjalon
2020-10-07 15:06   ` [dpdk-dev] [PATCH v2 2/9] app/testpmd: add multiple pools per core creation Viacheslav Ovsiienko
2020-10-07 15:06   ` [dpdk-dev] [PATCH v2 3/9] app/testpmd: add buffer split offload configuration Viacheslav Ovsiienko
2020-10-07 15:06   ` [dpdk-dev] [PATCH v2 4/9] app/testpmd: add rxpkts commands and parameters Viacheslav Ovsiienko
2020-10-07 15:06   ` [dpdk-dev] [PATCH v2 5/9] app/testpmd: add extended Rx queue setup Viacheslav Ovsiienko
2020-10-07 15:06   ` [dpdk-dev] [PATCH v2 6/9] net/mlx5: add extended Rx queue setup routine Viacheslav Ovsiienko
2020-10-07 15:06   ` Viacheslav Ovsiienko [this message]
2020-10-07 15:06   ` [dpdk-dev] [PATCH v2 8/9] net/mlx5: register multiple pool for Rx queue Viacheslav Ovsiienko
2020-10-07 15:06   ` [dpdk-dev] [PATCH v2 9/9] net/mlx5: update Rx datapath to support split Viacheslav Ovsiienko
2020-10-12 16:19 ` [dpdk-dev] [PATCH v3 0/9] ethdev: introduce Rx buffer split Viacheslav Ovsiienko
2020-10-12 16:19   ` [dpdk-dev] [PATCH v3 1/9] " Viacheslav Ovsiienko
2020-10-12 16:38     ` Andrew Rybchenko
2020-10-12 17:03       ` Thomas Monjalon
2020-10-12 17:11         ` Andrew Rybchenko
2020-10-12 20:22           ` Slava Ovsiienko
2020-10-12 17:11         ` Slava Ovsiienko
2020-10-12 16:19   ` [dpdk-dev] [PATCH v3 2/9] app/testpmd: add multiple pools per core creation Viacheslav Ovsiienko
2020-10-12 16:19   ` [dpdk-dev] [PATCH v3 3/9] app/testpmd: add buffer split offload configuration Viacheslav Ovsiienko
2020-10-12 16:19   ` [dpdk-dev] [PATCH v3 4/9] app/testpmd: add rxpkts commands and parameters Viacheslav Ovsiienko
2020-10-12 16:19   ` [dpdk-dev] [PATCH v3 5/9] app/testpmd: add extended Rx queue setup Viacheslav Ovsiienko
2020-10-12 16:19   ` [dpdk-dev] [PATCH v3 6/9] net/mlx5: add extended Rx queue setup routine Viacheslav Ovsiienko
2020-10-12 16:19   ` [dpdk-dev] [PATCH v3 7/9] net/mlx5: configure Rx queue to support split Viacheslav Ovsiienko
2020-10-12 16:19   ` [dpdk-dev] [PATCH v3 8/9] net/mlx5: register multiple pool for Rx queue Viacheslav Ovsiienko
2020-10-12 16:19   ` [dpdk-dev] [PATCH v3 9/9] net/mlx5: update Rx datapath to support split Viacheslav Ovsiienko
2020-10-12 20:09 ` [dpdk-dev] [PATCH v4 0/9] ethdev: introduce Rx buffer split Viacheslav Ovsiienko
2020-10-12 20:09   ` [dpdk-dev] [PATCH v4 1/9] " Viacheslav Ovsiienko
2020-10-12 20:09   ` [dpdk-dev] [PATCH v4 2/9] app/testpmd: add multiple pools per core creation Viacheslav Ovsiienko
2020-10-12 20:09   ` [dpdk-dev] [PATCH v4 3/9] app/testpmd: add buffer split offload configuration Viacheslav Ovsiienko
2020-10-12 20:09   ` [dpdk-dev] [PATCH v4 4/9] app/testpmd: add rxpkts commands and parameters Viacheslav Ovsiienko
2020-10-12 20:09   ` [dpdk-dev] [PATCH v4 5/9] app/testpmd: add extended Rx queue setup Viacheslav Ovsiienko
2020-10-12 20:09   ` [dpdk-dev] [PATCH v4 6/9] net/mlx5: add extended Rx queue setup routine Viacheslav Ovsiienko
2020-10-12 20:10   ` [dpdk-dev] [PATCH v4 7/9] net/mlx5: configure Rx queue to support split Viacheslav Ovsiienko
2020-10-12 20:10   ` [dpdk-dev] [PATCH v4 8/9] net/mlx5: register multiple pool for Rx queue Viacheslav Ovsiienko
2020-10-12 20:10   ` [dpdk-dev] [PATCH v4 9/9] net/mlx5: update Rx datapath to support split Viacheslav Ovsiienko
2020-10-13 19:21 ` [dpdk-dev] [PATCH v5 0/6] ethdev: introduce Rx buffer split Viacheslav Ovsiienko
2020-10-13 19:21   ` [dpdk-dev] [PATCH v5 1/6] " Viacheslav Ovsiienko
2020-10-13 22:34     ` Ferruh Yigit
2020-10-14 13:31       ` Olivier Matz
2020-10-14 14:42       ` Slava Ovsiienko
2020-10-13 19:21   ` [dpdk-dev] [PATCH v5 2/6] app/testpmd: add multiple pools per core creation Viacheslav Ovsiienko
2020-10-13 19:21   ` [dpdk-dev] [PATCH v5 3/6] app/testpmd: add buffer split offload configuration Viacheslav Ovsiienko
2020-10-13 19:21   ` [dpdk-dev] [PATCH v5 4/6] app/testpmd: add rxpkts commands and parameters Viacheslav Ovsiienko
2020-10-13 19:21   ` [dpdk-dev] [PATCH v5 5/6] app/testpmd: add rxoffs " Viacheslav Ovsiienko
2020-10-13 19:21   ` [dpdk-dev] [PATCH v5 6/6] app/testpmd: add extended Rx queue setup Viacheslav Ovsiienko
2020-10-14 18:11 ` [dpdk-dev] [PATCH v6 0/6] ethdev: introduce Rx buffer split Viacheslav Ovsiienko
2020-10-14 18:11   ` [dpdk-dev] [PATCH v6 1/6] " Viacheslav Ovsiienko
2020-10-14 18:57     ` Jerin Jacob
2020-10-15  7:43       ` Slava Ovsiienko
2020-10-15  9:27         ` Jerin Jacob
2020-10-15 10:27           ` Jerin Jacob
2020-10-15 10:51             ` Slava Ovsiienko
2020-10-15 11:26               ` Jerin Jacob
2020-10-15 11:36                 ` Ferruh Yigit
2020-10-15 11:49                   ` Slava Ovsiienko
2020-10-15 12:49                     ` Thomas Monjalon
2020-10-15 13:07                       ` Andrew Rybchenko
2020-10-15 13:57                         ` Slava Ovsiienko
2020-10-15 20:22                         ` Slava Ovsiienko
2020-10-15  9:49         ` Andrew Rybchenko
2020-10-15 10:34           ` Slava Ovsiienko
2020-10-15 11:09             ` Andrew Rybchenko
2020-10-15 14:39               ` Slava Ovsiienko
2020-10-14 22:13     ` Thomas Monjalon
2020-10-14 22:50     ` Ajit Khaparde
2020-10-15 10:11     ` Andrew Rybchenko
2020-10-15 10:19       ` Thomas Monjalon
2020-10-14 18:11   ` [dpdk-dev] [PATCH v6 2/6] app/testpmd: add multiple pools per core creation Viacheslav Ovsiienko
2020-10-14 18:11   ` [dpdk-dev] [PATCH v6 3/6] app/testpmd: add buffer split offload configuration Viacheslav Ovsiienko
2020-10-14 18:12   ` [dpdk-dev] [PATCH v6 4/6] app/testpmd: add rxpkts commands and parameters Viacheslav Ovsiienko
2020-10-14 18:12   ` [dpdk-dev] [PATCH v6 5/6] app/testpmd: add rxoffs " Viacheslav Ovsiienko
2020-10-14 18:12   ` [dpdk-dev] [PATCH v6 6/6] app/testpmd: add extended Rx queue setup Viacheslav Ovsiienko
2020-10-15  0:55 ` [dpdk-dev] [PATCH v2] eal/rte_malloc: add alloc_size() attribute to allocation functions Stephen Hemminger
2020-10-19 14:13   ` Thomas Monjalon
2020-10-19 14:22     ` Thomas Monjalon
2020-10-15 20:17 ` [dpdk-dev] [PATCH v7 0/6] ethdev: introduce Rx buffer split Viacheslav Ovsiienko
2020-10-15 20:17   ` [dpdk-dev] [PATCH v7 1/6] " Viacheslav Ovsiienko
2020-10-15 20:30     ` Jerin Jacob
2020-10-15 20:33     ` Thomas Monjalon
2020-10-15 22:01       ` Ajit Khaparde
2020-10-15 20:17   ` [dpdk-dev] [PATCH v7 2/6] app/testpmd: add multiple pools per core creation Viacheslav Ovsiienko
2020-10-15 20:17   ` [dpdk-dev] [PATCH v7 3/6] app/testpmd: add buffer split offload configuration Viacheslav Ovsiienko
2020-10-15 20:17   ` [dpdk-dev] [PATCH v7 4/6] app/testpmd: add rxpkts commands and parameters Viacheslav Ovsiienko
2020-10-15 20:17   ` [dpdk-dev] [PATCH v7 5/6] app/testpmd: add rxoffs " Viacheslav Ovsiienko
2020-10-15 20:17   ` [dpdk-dev] [PATCH v7 6/6] app/testpmd: add extended Rx queue setup Viacheslav Ovsiienko
2020-10-16  7:48 ` [dpdk-dev] [PATCH v8 0/6] ethdev: introduce Rx buffer split Viacheslav Ovsiienko
2020-10-16  7:48   ` [dpdk-dev] [PATCH v8 1/6] " Viacheslav Ovsiienko
2020-10-16  8:51     ` Andrew Rybchenko
2020-10-16  8:58       ` Andrew Rybchenko
2020-10-16  9:15       ` Slava Ovsiienko
2020-10-16  9:27         ` Andrew Rybchenko
2020-10-16  9:34           ` Slava Ovsiienko
2020-10-16  9:37         ` Thomas Monjalon
2020-10-16  9:38           ` Slava Ovsiienko
2020-10-16  9:19     ` Ferruh Yigit
2020-10-16  9:21       ` Andrew Rybchenko
2020-10-16  9:22       ` Slava Ovsiienko
2020-10-16  7:48   ` [dpdk-dev] [PATCH v8 2/6] app/testpmd: add multiple pools per core creation Viacheslav Ovsiienko
2020-10-16  7:48   ` [dpdk-dev] [PATCH v8 3/6] app/testpmd: add buffer split offload configuration Viacheslav Ovsiienko
2020-10-16  7:48   ` [dpdk-dev] [PATCH v8 4/6] app/testpmd: add rxpkts commands and parameters Viacheslav Ovsiienko
2020-10-16  7:48   ` [dpdk-dev] [PATCH v8 5/6] app/testpmd: add rxoffs " Viacheslav Ovsiienko
2020-10-16  7:48   ` [dpdk-dev] [PATCH v8 6/6] app/testpmd: add extended Rx queue setup Viacheslav Ovsiienko
2020-10-16 10:22 ` [dpdk-dev] [PATCH v9 0/6] ethdev: introduce Rx buffer split Viacheslav Ovsiienko
2020-10-16 10:22   ` [dpdk-dev] [PATCH v9 1/6] " Viacheslav Ovsiienko
2020-10-16 11:21     ` Ferruh Yigit
2020-10-16 13:08       ` Slava Ovsiienko
2020-10-16 10:22   ` [dpdk-dev] [PATCH v9 2/6] app/testpmd: add multiple pools per core creation Viacheslav Ovsiienko
2020-10-16 10:22   ` [dpdk-dev] [PATCH v9 3/6] app/testpmd: add buffer split offload configuration Viacheslav Ovsiienko
2020-10-16 10:22   ` [dpdk-dev] [PATCH v9 4/6] app/testpmd: add rxpkts commands and parameters Viacheslav Ovsiienko
2020-10-16 10:22   ` [dpdk-dev] [PATCH v9 5/6] app/testpmd: add rxoffs " Viacheslav Ovsiienko
2020-10-16 10:22   ` [dpdk-dev] [PATCH v9 6/6] app/testpmd: add extended Rx queue setup Viacheslav Ovsiienko
2020-10-16 12:41 ` [dpdk-dev] [PATCH v10 0/6] ethdev: introduce Rx buffer split Viacheslav Ovsiienko
2020-10-16 12:41   ` [dpdk-dev] [PATCH v10 1/6] " Viacheslav Ovsiienko
2020-10-16 12:41   ` [dpdk-dev] [PATCH v10 2/6] app/testpmd: add multiple pools per core creation Viacheslav Ovsiienko
2020-10-16 12:41   ` [dpdk-dev] [PATCH v10 3/6] app/testpmd: add buffer split offload configuration Viacheslav Ovsiienko
2020-10-16 12:41   ` [dpdk-dev] [PATCH v10 4/6] app/testpmd: add rxpkts commands and parameters Viacheslav Ovsiienko
2020-10-16 12:41   ` [dpdk-dev] [PATCH v10 5/6] app/testpmd: add rxoffs " Viacheslav Ovsiienko
2020-10-16 12:41   ` [dpdk-dev] [PATCH v10 6/6] app/testpmd: add extended Rx queue setup Viacheslav Ovsiienko
2020-10-16 13:39 ` [dpdk-dev] [PATCH v11 0/6] ethdev: introduce Rx buffer split Viacheslav Ovsiienko
2020-10-16 13:39   ` [dpdk-dev] [PATCH v11 1/6] " Viacheslav Ovsiienko
2020-10-16 15:14     ` Thomas Monjalon
2020-10-16 16:18       ` Slava Ovsiienko
2020-10-16 15:47     ` Ferruh Yigit
2020-10-16 16:05       ` Thomas Monjalon
2020-10-16 16:06         ` Ferruh Yigit
2020-10-16 13:39   ` [dpdk-dev] [PATCH v11 2/6] app/testpmd: add multiple pools per core creation Viacheslav Ovsiienko
2020-10-16 15:05     ` Ferruh Yigit
2020-10-16 15:38       ` Ferruh Yigit
2020-10-16 15:48         ` Slava Ovsiienko
2020-10-16 15:52           ` Ferruh Yigit
2020-10-16 15:55             ` Slava Ovsiienko
2020-10-16 15:57               ` Ferruh Yigit
2020-10-16 13:39   ` [dpdk-dev] [PATCH v11 3/6] app/testpmd: add buffer split offload configuration Viacheslav Ovsiienko
2020-10-16 13:39   ` [dpdk-dev] [PATCH v11 4/6] app/testpmd: add rxpkts commands and parameters Viacheslav Ovsiienko
2020-10-16 13:39   ` [dpdk-dev] [PATCH v11 5/6] app/testpmd: add rxoffs " Viacheslav Ovsiienko
2020-10-16 13:39   ` [dpdk-dev] [PATCH v11 6/6] app/testpmd: add extended Rx queue setup Viacheslav Ovsiienko
2020-10-16 16:44 ` [dpdk-dev] [PATCH v12 0/6] ethdev: introduce Rx buffer split Viacheslav Ovsiienko
2020-10-16 16:44   ` [dpdk-dev] [PATCH v12 1/6] " Viacheslav Ovsiienko
2020-10-16 19:22     ` Ferruh Yigit
2020-10-16 21:36       ` Ferruh Yigit
2020-10-16 16:44   ` [dpdk-dev] [PATCH v12 2/6] app/testpmd: add multiple pools per core creation Viacheslav Ovsiienko
2020-10-16 16:44   ` [dpdk-dev] [PATCH v12 3/6] app/testpmd: add buffer split offload configuration Viacheslav Ovsiienko
2020-10-16 16:44   ` [dpdk-dev] [PATCH v12 4/6] app/testpmd: add rxpkts commands and parameters Viacheslav Ovsiienko
2020-10-16 16:44   ` [dpdk-dev] [PATCH v12 5/6] app/testpmd: add rxoffs " Viacheslav Ovsiienko
2020-10-16 16:44   ` [dpdk-dev] [PATCH v12 6/6] app/testpmd: add extended Rx queue setup Viacheslav Ovsiienko
2020-10-16 17:05   ` [dpdk-dev] [PATCH v12 0/6] ethdev: introduce Rx buffer split Ferruh Yigit
2020-10-16 17:07     ` Slava Ovsiienko

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1602083215-22921-8-git-send-email-viacheslavo@nvidia.com \
    --to=viacheslavo@nvidia.com \
    --cc=arybchenko@solarflare.com \
    --cc=david.marchand@redhat.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=jerinjacobk@gmail.com \
    --cc=maxime.coquelin@redhat.com \
    --cc=olivier.matz@6wind.com \
    --cc=stephen@networkplumber.org \
    --cc=thomasm@monjalon.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK patches and discussions

Archives are clonable:
	git clone --mirror http://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ http://inbox.dpdk.org/dev \
		dev@dpdk.org
	public-inbox-index dev


Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/ public-inbox