DPDK patches and discussions
 help / color / mirror / Atom feed
From: "谢华伟(此时此刻)" <huawei.xhw@alibaba-inc.com>
To: dev@dpdk.org
Cc: "谢华伟(此时此刻)" <huawei.xhw@alibaba-inc.com>
Subject: [dpdk-dev] [PATCH v3] pci: support both PIO and MMIO BAR for legacy virtio on x86
Date: Fri, 09 Oct 2020 16:36:08 +0800
Message-ID: <1602232568-73008-1-git-send-email-huawei.xhw@alibaba-inc.com> (raw)
In-Reply-To: <68ecd941-9c56-4de7-fae2-2ad15bdfd81a@alibaba-inc.com>

From: "huawei.xhw" <huawei.xhw@alibaba-inc.com>

Legacy virtio-pci only supports PIO BAR resource. As we need to create lots of
virtio devices and PIO resource on x86 is very limited, we expose MMIO BAR.

Kernel supports both PIO  and MMIO BAR for legacy virtio-pci device. We handles
different type of BAR in the similar way.

In previous implementation, with igb_uio we get PIO address from igb_uio
sysfs entry; with uio_pci_generic, we get PIO address from
/proc/ioports.
For PIO/MMIO RW, there is different path for different drivers and arch.
For VFIO, PIO/MMIO RW is through syscall, which has big performance
issue.
On X86, it assumes only PIO is supported.

All of the above is too much twisted.
This patch unifies the way to get both PIO and MMIO address for different driver
and arch, all from standard resource attr under pci sysfs.

We distinguish PIO and MMIO by their address like how kernel does. It is ugly but works.

Signed-off-by: huawei.xhw <huawei.xhw@alibaba-inc.com>
---
 drivers/bus/pci/linux/pci.c     |  89 +--------------------
 drivers/bus/pci/linux/pci_uio.c | 166 +++++++++++++++++++++++++++-------------
 2 files changed, 118 insertions(+), 137 deletions(-)

diff --git a/drivers/bus/pci/linux/pci.c b/drivers/bus/pci/linux/pci.c
index bf27594..885e54e 100644
--- a/drivers/bus/pci/linux/pci.c
+++ b/drivers/bus/pci/linux/pci.c
@@ -687,71 +687,6 @@ int rte_pci_write_config(const struct rte_pci_device *device,
 	}
 }
 
-#if defined(RTE_ARCH_X86)
-static int
-pci_ioport_map(struct rte_pci_device *dev, int bar __rte_unused,
-		struct rte_pci_ioport *p)
-{
-	uint16_t start, end;
-	FILE *fp;
-	char *line = NULL;
-	char pci_id[16];
-	int found = 0;
-	size_t linesz;
-
-	if (rte_eal_iopl_init() != 0) {
-		RTE_LOG(ERR, EAL, "%s(): insufficient ioport permissions for PCI device %s\n",
-			__func__, dev->name);
-		return -1;
-	}
-
-	snprintf(pci_id, sizeof(pci_id), PCI_PRI_FMT,
-		 dev->addr.domain, dev->addr.bus,
-		 dev->addr.devid, dev->addr.function);
-
-	fp = fopen("/proc/ioports", "r");
-	if (fp == NULL) {
-		RTE_LOG(ERR, EAL, "%s(): can't open ioports\n", __func__);
-		return -1;
-	}
-
-	while (getdelim(&line, &linesz, '\n', fp) > 0) {
-		char *ptr = line;
-		char *left;
-		int n;
-
-		n = strcspn(ptr, ":");
-		ptr[n] = 0;
-		left = &ptr[n + 1];
-
-		while (*left && isspace(*left))
-			left++;
-
-		if (!strncmp(left, pci_id, strlen(pci_id))) {
-			found = 1;
-
-			while (*ptr && isspace(*ptr))
-				ptr++;
-
-			sscanf(ptr, "%04hx-%04hx", &start, &end);
-
-			break;
-		}
-	}
-
-	free(line);
-	fclose(fp);
-
-	if (!found)
-		return -1;
-
-	p->base = start;
-	RTE_LOG(DEBUG, EAL, "PCI Port IO found start=0x%x\n", start);
-
-	return 0;
-}
-#endif
-
 int
 rte_pci_ioport_map(struct rte_pci_device *dev, int bar,
 		struct rte_pci_ioport *p)
@@ -762,18 +697,12 @@ int rte_pci_write_config(const struct rte_pci_device *device,
 #ifdef VFIO_PRESENT
 	case RTE_PCI_KDRV_VFIO:
 		if (pci_vfio_is_enabled())
-			ret = pci_vfio_ioport_map(dev, bar, p);
+			ret = pci_uio_ioport_map(dev, bar, p);
 		break;
 #endif
 	case RTE_PCI_KDRV_IGB_UIO:
-		ret = pci_uio_ioport_map(dev, bar, p);
-		break;
 	case RTE_PCI_KDRV_UIO_GENERIC:
-#if defined(RTE_ARCH_X86)
-		ret = pci_ioport_map(dev, bar, p);
-#else
 		ret = pci_uio_ioport_map(dev, bar, p);
-#endif
 		break;
 	default:
 		break;
@@ -792,12 +721,10 @@ int rte_pci_write_config(const struct rte_pci_device *device,
 	switch (p->dev->kdrv) {
 #ifdef VFIO_PRESENT
 	case RTE_PCI_KDRV_VFIO:
-		pci_vfio_ioport_read(p, data, len, offset);
+		pci_uio_ioport_read(p, data, len, offset);
 		break;
 #endif
 	case RTE_PCI_KDRV_IGB_UIO:
-		pci_uio_ioport_read(p, data, len, offset);
-		break;
 	case RTE_PCI_KDRV_UIO_GENERIC:
 		pci_uio_ioport_read(p, data, len, offset);
 		break;
@@ -813,12 +740,10 @@ int rte_pci_write_config(const struct rte_pci_device *device,
 	switch (p->dev->kdrv) {
 #ifdef VFIO_PRESENT
 	case RTE_PCI_KDRV_VFIO:
-		pci_vfio_ioport_write(p, data, len, offset);
+		pci_uio_ioport_write(p, data, len, offset);
 		break;
 #endif
 	case RTE_PCI_KDRV_IGB_UIO:
-		pci_uio_ioport_write(p, data, len, offset);
-		break;
 	case RTE_PCI_KDRV_UIO_GENERIC:
 		pci_uio_ioport_write(p, data, len, offset);
 		break;
@@ -836,18 +761,12 @@ int rte_pci_write_config(const struct rte_pci_device *device,
 #ifdef VFIO_PRESENT
 	case RTE_PCI_KDRV_VFIO:
 		if (pci_vfio_is_enabled())
-			ret = pci_vfio_ioport_unmap(p);
+			ret = pci_uio_ioport_unmap(p);
 		break;
 #endif
 	case RTE_PCI_KDRV_IGB_UIO:
-		ret = pci_uio_ioport_unmap(p);
-		break;
 	case RTE_PCI_KDRV_UIO_GENERIC:
-#if defined(RTE_ARCH_X86)
-		ret = 0;
-#else
 		ret = pci_uio_ioport_unmap(p);
-#endif
 		break;
 	default:
 		break;
diff --git a/drivers/bus/pci/linux/pci_uio.c b/drivers/bus/pci/linux/pci_uio.c
index f3305a2..cf49e8f 100644
--- a/drivers/bus/pci/linux/pci_uio.c
+++ b/drivers/bus/pci/linux/pci_uio.c
@@ -373,52 +373,83 @@
 pci_uio_ioport_map(struct rte_pci_device *dev, int bar,
 		   struct rte_pci_ioport *p)
 {
+	FILE *f = NULL;
 	char dirname[PATH_MAX];
 	char filename[PATH_MAX];
+	char buf[BUFSIZ];
+	uint64_t phys_addr, end_addr, flags;
 	int uio_num;
-	unsigned long start;
+	unsigned long base;
+	bool iobar;
+	int i;
 
-	if (rte_eal_iopl_init() != 0) {
-		RTE_LOG(ERR, EAL, "%s(): insufficient ioport permissions for PCI device %s\n",
-			__func__, dev->name);
+	/* open and read addresses of the corresponding resource in sysfs */
+	snprintf(filename, sizeof(filename), "%s/" PCI_PRI_FMT "/resource",
+		rte_pci_get_sysfs_path(), dev->addr.domain, dev->addr.bus,
+		dev->addr.devid, dev->addr.function);
+	f = fopen(filename, "r");
+	if (f == NULL) {
+		RTE_LOG(ERR, EAL, "Cannot open sysfs resource: %s\n",
+			strerror(errno));
 		return -1;
 	}
 
-	uio_num = pci_get_uio_dev(dev, dirname, sizeof(dirname), 0);
-	if (uio_num < 0)
-		return -1;
+	for (i = 0; i < bar + 1; i++) {
+		if (fgets(buf, sizeof(buf), f) == NULL) {
+			RTE_LOG(ERR, EAL, "Cannot read sysfs resource\n");
+			goto error;
+		}
+	}
+	if (pci_parse_one_sysfs_resource(buf, sizeof(buf), &phys_addr,
+		&end_addr, &flags) < 0)
+		goto error;
 
-	/* get portio start */
-	snprintf(filename, sizeof(filename),
-		 "%s/portio/port%d/start", dirname, bar);
-	if (eal_parse_sysfs_value(filename, &start) < 0) {
-		RTE_LOG(ERR, EAL, "%s(): cannot parse portio start\n",
-			__func__);
-		return -1;
+	if (flags & IORESOURCE_IO) {
+		iobar = 1;
+		base = (unsigned long)phys_addr;
+		RTE_LOG(INFO, EAL, "%s(): PIO BAR %08lx detected\n", __func__, base);
+	} else if (flags & IORESOURCE_MEM) {
+		iobar = 0;
+		base = (unsigned long)dev->mem_resource[bar].addr;
+		RTE_LOG(INFO, EAL, "%s(): MMIO BAR %08lx detected\n", __func__, base);
+	} else {
+		RTE_LOG(ERR, EAL, "%s(): unknown BAR type\n", __func__);
+		goto error;
+	}
+
+	if (iobar && rte_eal_iopl_init() != 0) {
+		RTE_LOG(ERR, EAL, "%s(): insufficient ioport permissions for PCI device %s\n",
+			__func__, dev->name);
+		goto error;
 	}
-	/* ensure we don't get anything funny here, read/write will cast to
-	 * uin16_t */
-	if (start > UINT16_MAX)
-		return -1;
 
 	/* FIXME only for primary process ? */
-	if (dev->intr_handle.type == RTE_INTR_HANDLE_UNKNOWN) {
+	if (dev->intr_handle.type == RTE_INTR_HANDLE_UNKNOWN &&
+	    dev->kdrv == RTE_KDRV_UIO_GENERIC) {
+		uio_num = pci_get_uio_dev(dev, dirname, sizeof(dirname), 0);
+		if (uio_num < 0)
+			goto error;
 
 		snprintf(filename, sizeof(filename), "/dev/uio%u", uio_num);
 		dev->intr_handle.fd = open(filename, O_RDWR);
 		if (dev->intr_handle.fd < 0) {
 			RTE_LOG(ERR, EAL, "Cannot open %s: %s\n",
 				filename, strerror(errno));
-			return -1;
+			goto error;
 		}
 		dev->intr_handle.type = RTE_INTR_HANDLE_UIO;
 	}
 
-	RTE_LOG(DEBUG, EAL, "PCI Port IO found start=0x%lx\n", start);
+	RTE_LOG(DEBUG, EAL, "PCI IO port found start=0x%lx\n", base);
 
-	p->base = start;
+	p->base = base;
 	p->len = 0;
+	fclose(f);
 	return 0;
+error:
+	if (f)
+		fclose(f);
+	return -1;
 }
 #else
 int
@@ -489,6 +520,61 @@
 }
 #endif
 
+#define PIO_MAX 0x10000
+static inline uint8_t ioread8(void *addr)
+{
+	uint8_t val;
+
+	val = (uint64_t)(uintptr_t)addr >= PIO_MAX ?
+		*(volatile uint8_t *)addr :
+		inb((unsigned long)addr);
+
+	return val;
+}
+
+static inline uint16_t ioread16(void *addr)
+{
+	uint16_t val;
+
+	val = (uint64_t)(uintptr_t)addr >= PIO_MAX ?
+		*(volatile uint16_t *)addr :
+		inw((unsigned long)addr);
+
+	return val;
+}
+
+static inline uint32_t ioread32(void *addr)
+{
+	uint32_t val;
+
+	val = (uint64_t)(uintptr_t)addr >= PIO_MAX ?
+		*(volatile uint32_t *)addr :
+	inl((unsigned long)addr);
+
+	return val;
+}
+
+static inline void iowrite8(uint8_t val, void *addr)
+{
+	(uint64_t)(uintptr_t)addr >= PIO_MAX ?
+		*(volatile uint8_t *)addr = val :
+		outb(val, (unsigned long)addr);
+}
+
+static inline void iowrite16(uint16_t val, void *addr)
+{
+	(uint64_t)(uintptr_t)addr >= PIO_MAX ?
+		*(volatile uint16_t *)addr = val :
+		outw(val, (unsigned long)addr);
+}
+
+static inline void iowrite32(uint32_t val, void *addr)
+{
+	(uint64_t)(uintptr_t)addr >= PIO_MAX ?
+		*(volatile uint32_t *)addr = val :
+		outl(val, (unsigned long)addr);
+}
+
 void
 pci_uio_ioport_read(struct rte_pci_ioport *p,
 		    void *data, size_t len, off_t offset)
@@ -500,25 +586,13 @@
 	for (d = data; len > 0; d += size, reg += size, len -= size) {
 		if (len >= 4) {
 			size = 4;
-#if defined(RTE_ARCH_X86)
-			*(uint32_t *)d = inl(reg);
-#else
-			*(uint32_t *)d = *(volatile uint32_t *)reg;
-#endif
+			*(uint32_t *)d = ioread32((void *)reg);
 		} else if (len >= 2) {
 			size = 2;
-#if defined(RTE_ARCH_X86)
-			*(uint16_t *)d = inw(reg);
-#else
-			*(uint16_t *)d = *(volatile uint16_t *)reg;
-#endif
+			*(uint16_t *)d = ioread16((void *)reg);
 		} else {
 			size = 1;
-#if defined(RTE_ARCH_X86)
-			*d = inb(reg);
-#else
-			*d = *(volatile uint8_t *)reg;
-#endif
+			*d = ioread8((void *)reg);
 		}
 	}
 }
@@ -534,25 +608,13 @@
 	for (s = data; len > 0; s += size, reg += size, len -= size) {
 		if (len >= 4) {
 			size = 4;
-#if defined(RTE_ARCH_X86)
-			outl_p(*(const uint32_t *)s, reg);
-#else
-			*(volatile uint32_t *)reg = *(const uint32_t *)s;
-#endif
+			iowrite32(*(const uint32_t *)s, (void *)reg);
 		} else if (len >= 2) {
 			size = 2;
-#if defined(RTE_ARCH_X86)
-			outw_p(*(const uint16_t *)s, reg);
-#else
-			*(volatile uint16_t *)reg = *(const uint16_t *)s;
-#endif
+			iowrite16(*(const uint16_t *)s, (void *)reg);
 		} else {
 			size = 1;
-#if defined(RTE_ARCH_X86)
-			outb_p(*s, reg);
-#else
-			*(volatile uint8_t *)reg = *s;
-#endif
+			iowrite8(*s, (void *)reg);
 		}
 	}
 }
-- 
1.8.3.1


  parent reply	other threads:[~2020-10-09  8:36 UTC|newest]

Thread overview: 58+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-30 14:59 [dpdk-dev] [PATCH v2] " 谢华伟(此时此刻)
2020-10-01 10:22 ` Burakov, Anatoly
2020-10-02  5:44   ` 谢华伟(此时此刻)
2020-10-09  8:36 ` 谢华伟(此时此刻) [this message]
2020-10-13  8:41 ` [dpdk-dev] [PATCH v4] support both PIO and MMIO bar for virtio pci device 谢华伟(此时此刻)
2020-10-13  8:41   ` [dpdk-dev] [PATCH v4] pci: support both PIO and MMIO BAR for legacy virtio on x86 谢华伟(此时此刻)
2020-10-13 12:34     ` 谢华伟(此时此刻)
2020-10-21  8:46     ` 谢华伟(此时此刻)
2020-10-21 11:49     ` Ferruh Yigit
2020-10-21 12:32       ` 谢华伟(此时此刻)
2020-10-21 17:24         ` Ferruh Yigit
2020-10-22  9:15           ` 谢华伟(此时此刻)
2020-10-22  9:44             ` Ferruh Yigit
2020-10-22  9:57               ` 谢华伟(此时此刻)
2020-10-22 15:51 ` [dpdk-dev] [PATCH v5 0/3] support both PIO and MMIO BAR for virtio PMD 谢华伟(此时此刻)
2020-10-22 15:51   ` [dpdk-dev] [PATCH v5 1/3] PCI: use PCI standard sysfs entry to get PIO address 谢华伟(此时此刻)
2021-01-12  8:07     ` Maxime Coquelin
2021-01-14 18:23       ` 谢华伟(此时此刻)
2021-01-24 15:10         ` Xueming(Steven) Li
2020-10-22 15:51   ` [dpdk-dev] [PATCH v5 2/3] PCI: support MMIO in rte_pci_ioport_map/unap/read/write 谢华伟(此时此刻)
2021-01-12  8:23     ` Maxime Coquelin
2021-01-21  6:30       ` 谢华伟(此时此刻)
2021-01-24 15:22     ` Xueming(Steven) Li
2021-01-25  3:08       ` 谢华伟(此时此刻)
2021-01-27 10:40     ` Ferruh Yigit
2021-01-27 15:34       ` 谢华伟(此时此刻)
2021-01-27 16:45         ` Ferruh Yigit
2020-10-22 15:51   ` [dpdk-dev] [PATCH v5 3/3] PCI: don't use vfio ioctl call to access PIO resource 谢华伟(此时此刻)
2021-01-12  9:37     ` Maxime Coquelin
2021-01-12 16:58       ` Maxime Coquelin
2021-01-20 14:54         ` 谢华伟(此时此刻)
2021-01-21  8:29           ` Maxime Coquelin
2021-01-21 14:57             ` 谢华伟(此时此刻)
2021-01-21 15:00               ` 谢华伟(此时此刻)
2021-01-21 15:38               ` Maxime Coquelin
2021-01-22  7:25                 ` 谢华伟(此时此刻)
2021-01-26 10:44                   ` Maxime Coquelin
2021-01-27 10:32                     ` Ferruh Yigit
2021-01-27 12:17                       ` Maxime Coquelin
2021-01-27 14:43                       ` 谢华伟(此时此刻)
2021-01-27 16:45                         ` Ferruh Yigit
2021-01-28 13:43                           ` 谢华伟(此时此刻)
2021-01-26 12:30                   ` 谢华伟(此时此刻)
2021-01-26 12:35                     ` Maxime Coquelin
2021-01-26 14:24                       ` 谢华伟(此时此刻)
2020-10-27  8:50   ` [dpdk-dev] [PATCH v5 0/3] support both PIO and MMIO BAR for virtio PMD 谢华伟(此时此刻)
2020-10-28  3:48     ` 谢华伟(此时此刻)
2020-11-02 11:56   ` 谢华伟(此时此刻)
2020-11-10 12:35   ` 谢华伟(此时此刻)
2020-11-10 12:42     ` David Marchand
2020-11-12 13:35       ` 谢华伟(此时此刻)
2020-12-14 14:24       ` 谢华伟(此时此刻)
2020-12-16  7:54         ` Maxime Coquelin
2021-01-12 17:37   ` Maxime Coquelin
2021-01-14 18:19     ` 谢华伟(此时此刻)
2021-01-21  4:12     ` 谢华伟(此时此刻)
2021-01-21  8:47       ` Maxime Coquelin
2021-01-21 13:51         ` 谢华伟(此时此刻)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1602232568-73008-1-git-send-email-huawei.xhw@alibaba-inc.com \
    --to=huawei.xhw@alibaba-inc.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK patches and discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ http://inbox.dpdk.org/dev \
		dev@dpdk.org
	public-inbox-index dev

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git