DPDK patches and discussions
 help / color / mirror / Atom feed
From: Timothy McDaniel <timothy.mcdaniel@intel.com>
To: Bruce Richardson <bruce.richardson@intel.com>,
	John McNamara <john.mcnamara@intel.com>,
	Marko Kovacevic <marko.kovacevic@intel.com>,
	Ray Kinsella <mdr@ashroe.eu>, Neil Horman <nhorman@tuxdriver.com>
Cc: dev@dpdk.org, erik.g.carrillo@intel.com, gage.eads@intel.com,
	harry.van.haaren@intel.com, jerinj@marvell.com
Subject: [dpdk-dev] [PATCH v2 01/22] event/dlb2: add documentation and meson build infrastructure
Date: Sat, 17 Oct 2020 13:20:58 -0500	[thread overview]
Message-ID: <1602958879-8558-2-git-send-email-timothy.mcdaniel@intel.com> (raw)
In-Reply-To: <1602958879-8558-1-git-send-email-timothy.mcdaniel@intel.com>

Adds the meson build infrastructure, which includes
compile-time constants in rte_config.h. DLB2 is
only supported on Linux X86 platforms at this time.

Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
---
 config/rte_config.h                               |   7 +
 doc/guides/eventdevs/dlb2.rst                     | 330 ++++++++++++++++++++++
 doc/guides/eventdevs/index.rst                    |   1 +
 drivers/event/dlb2/meson.build                    |   7 +
 drivers/event/dlb2/rte_pmd_dlb2_event_version.map |   3 +
 drivers/event/meson.build                         |   3 +
 6 files changed, 351 insertions(+)
 create mode 100644 doc/guides/eventdevs/dlb2.rst
 create mode 100644 drivers/event/dlb2/meson.build
 create mode 100644 drivers/event/dlb2/rte_pmd_dlb2_event_version.map

diff --git a/config/rte_config.h b/config/rte_config.h
index 0bae630..fd1b3c3 100644
--- a/config/rte_config.h
+++ b/config/rte_config.h
@@ -131,4 +131,11 @@
 /* QEDE PMD defines */
 #define RTE_LIBRTE_QEDE_FW ""
 
+/* DLB2 defines */
+#define RTE_LIBRTE_PMD_DLB2_POLL_INTERVAL 1000
+#define RTE_LIBRTE_PMD_DLB2_UMWAIT_CTL_STATE  0
+#undef RTE_LIBRTE_PMD_DLB2_QUELL_STATS
+#define RTE_LIBRTE_PMD_DLB2_SW_CREDIT_QUANTA 32
+#define RTE_PMD_DLB2_DEFAULT_DEPTH_THRESH 256
+
 #endif /* _RTE_CONFIG_H_ */
diff --git a/doc/guides/eventdevs/dlb2.rst b/doc/guides/eventdevs/dlb2.rst
new file mode 100644
index 0000000..fa8d6dd
--- /dev/null
+++ b/doc/guides/eventdevs/dlb2.rst
@@ -0,0 +1,330 @@
+..  SPDX-License-Identifier: BSD-3-Clause
+    Copyright(c) 2020 Intel Corporation.
+
+Driver for the Intel® Dynamic Load Balancer (DLB2)
+==================================================
+
+The DPDK dlb poll mode driver supports the Intel® Dynamic Load Balancer.
+
+Prerequisites
+-------------
+
+Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup
+the basic DPDK environment.
+
+Configuration
+-------------
+
+The DLB2 PF PMD is a user-space PMD that uses VFIO to gain direct
+device access. To use this operation mode, the PCIe PF device must be bound
+to a DPDK-compatible VFIO driver, such as vfio-pci.
+
+Eventdev API Notes
+------------------
+
+The DLB2 provides the functions of a DPDK event device; specifically, it
+supports atomic, ordered, and parallel scheduling events from queues to ports.
+However, the DLB2 hardware is not a perfect match to the eventdev API. Some DLB2
+features are abstracted by the PMD such as directed ports.
+
+In general the dlb PMD is designed for ease-of-use and does not require a
+detailed understanding of the hardware, but these details are important when
+writing high-performance code. This section describes the places where the
+eventdev API and DLB2 misalign.
+
+Scheduling Domain Configuration
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+There are 32 scheduling domainis the DLB2.
+When one is configured, it allocates load-balanced and
+directed queues, ports, credits, and other hardware resources. Some
+resource allocations are user-controlled -- the number of queues, for example
+-- and others, like credit pools (one directed and one load-balanced pool per
+scheduling domain), are not.
+
+The DLB2 is a closed system eventdev, and as such the ``nb_events_limit`` device
+setup argument and the per-port ``new_event_threshold`` argument apply as
+defined in the eventdev header file. The limit is applied to all enqueues,
+regardless of whether it will consume a directed or load-balanced credit.
+
+Load-balanced and Directed Ports
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+DLB2 ports come in two flavors: load-balanced and directed. The eventdev API
+does not have the same concept, but it has a similar one: ports and queues that
+are singly-linked (i.e. linked to a single queue or port, respectively).
+
+The ``rte_event_dev_info_get()`` function reports the number of available
+event ports and queues (among other things). For the DLB2 PMD, max_event_ports
+and max_event_queues report the number of available load-balanced ports and
+queues, and max_single_link_event_port_queue_pairs reports the number of
+available directed ports and queues.
+
+When a scheduling domain is created in ``rte_event_dev_configure()``, the user
+specifies ``nb_event_ports`` and ``nb_single_link_event_port_queues``, which
+control the total number of ports (load-balanced and directed) and the number
+of directed ports. Hence, the number of requested load-balanced ports is
+``nb_event_ports - nb_single_link_event_ports``. The ``nb_event_queues`` field
+specifies the total number of queues (load-balanced and directed). The number
+of directed queues comes from ``nb_single_link_event_port_queues``, since
+directed ports and queues come in pairs.
+
+When a port is setup, the ``RTE_EVENT_PORT_CFG_SINGLE_LINK`` flag determines
+whether it should be configured as a directed (the flag is set) or a
+load-balanced (the flag is unset) port. Similarly, the
+``RTE_EVENT_QUEUE_CFG_SINGLE_LINK`` queue configuration flag controls
+whether it is a directed or load-balanced queue.
+
+Load-balanced ports can only be linked to load-balanced queues, and directed
+ports can only be linked to directed queues. Furthermore, directed ports can
+only be linked to a single directed queue (and vice versa), and that link
+cannot change after the eventdev is started.
+
+The eventdev API does not have a directed scheduling type. To support directed
+traffic, the dlb PMD detects when an event is being sent to a directed queue
+and overrides its scheduling type. Note that the originally selected scheduling
+type (atomic, ordered, or parallel) is not preserved, and an event's sched_type
+will be set to ``RTE_SCHED_TYPE_ATOMIC`` when it is dequeued from a directed
+port.
+
+Flow ID
+~~~~~~~
+
+The flow ID field is preserved in the event when it is scheduled in the
+DLB2.
+
+Hardware Credits
+~~~~~~~~~~~~~~~~
+
+DLB2 uses a hardware credit scheme to prevent software from overflowing hardware
+event storage, with each unit of storage represented by a credit. A port spends
+a credit to enqueue an event, and hardware refills the ports with credits as the
+events are scheduled to ports. Refills come from credit pools, and each port is
+a member of a load-balanced credit pool and a directed credit pool. The
+load-balanced credits are used to enqueue to load-balanced queues, and directed
+credits are used for directed queues.
+
+A DLB2 eventdev contains one load-balanced and one directed credit pool. These
+pools' sizes are controlled by the nb_events_limit field in struct
+rte_event_dev_config. The load-balanced pool is sized to contain
+nb_events_limit credits, and the directed pool is sized to contain
+nb_events_limit/4 credits. The directed pool size can be overridden with the
+num_dir_credits vdev argument, like so:
+
+    .. code-block:: console
+
+       --vdev=dlb1_event,num_dir_credits=<value>
+
+This can be used if the default allocation is too low or too high for the
+specific application needs. The PMD also supports a vdev arg that limits the
+max_num_events reported by rte_event_dev_info_get():
+
+    .. code-block:: console
+
+       --vdev=dlb1_event,max_num_events=<value>
+
+By default, max_num_events is reported as the total available load-balanced
+credits. If multiple DLB2-based applications are being used, it may be desirable
+to control how many load-balanced credits each application uses, particularly
+when application(s) are written to configure nb_events_limit equal to the
+reported max_num_events.
+
+Each port is a member of both credit pools. A port's credit allocation is
+defined by its low watermark, high watermark, and refill quanta. These three
+parameters are calculated by the dlb PMD like so:
+
+- The load-balanced high watermark is set to the port's enqueue_depth.
+  The directed high watermark is set to the minimum of the enqueue_depth and
+  the directed pool size divided by the total number of ports.
+- The refill quanta is set to half the high watermark.
+- The low watermark is set to the minimum of 16 and the refill quanta.
+
+When the eventdev is started, each port is pre-allocated a high watermark's
+worth of credits. For example, if an eventdev contains four ports with enqueue
+depths of 32 and a load-balanced credit pool size of 4096, each port will start
+with 32 load-balanced credits, and there will be 3968 credits available to
+replenish the ports. Thus, a single port is not capable of enqueueing up to the
+nb_events_limit (without any events being dequeued), since the other ports are
+retaining their initial credit allocation; in short, all ports must enqueue in
+order to reach the limit.
+
+If a port attempts to enqueue and has no credits available, the enqueue
+operation will fail and the application must retry the enqueue. Credits are
+replenished asynchronously by the DLB2 hardware.
+
+Software Credits
+~~~~~~~~~~~~~~~~
+
+The DLB2 is a "closed system" event dev, and the DLB2 PMD layers a software
+credit scheme on top of the hardware credit scheme in order to comply with
+the per-port backpressure described in the eventdev API.
+
+The DLB2's hardware scheme is local to a queue/pipeline stage: a port spends a
+credit when it enqueues to a queue, and credits are later replenished after the
+events are dequeued and released.
+
+In the software credit scheme, a credit is consumed when a new (.op =
+RTE_EVENT_OP_NEW) event is injected into the system, and the credit is
+replenished when the event is released from the system (either explicitly with
+RTE_EVENT_OP_RELEASE or implicitly in dequeue_burst()).
+
+In this model, an event is "in the system" from its first enqueue into eventdev
+until it is last dequeued. If the event goes through multiple event queues, it
+is still considered "in the system" while a worker thread is processing it.
+
+A port will fail to enqueue if the number of events in the system exceeds its
+``new_event_threshold`` (specified at port setup time). A port will also fail
+to enqueue if it lacks enough hardware credits to enqueue; load-balanced
+credits are used to enqueue to a load-balanced queue, and directed credits are
+used to enqueue to a directed queue.
+
+The out-of-credit situations are typically transient, and an eventdev
+application using the DLB2 ought to retry its enqueues if they fail.
+If enqueue fails, DLB2 PMD sets rte_errno as follows:
+
+- -ENOSPC: Credit exhaustion (either hardware or software)
+- -EINVAL: Invalid argument, such as port ID, queue ID, or sched_type.
+
+Depending on the pipeline the application has constructed, it's possible to
+enter a credit deadlock scenario wherein the worker thread lacks the credit
+to enqueue an event, and it must dequeue an event before it can recover the
+credit. If the worker thread retries its enqueue indefinitely, it will not
+make forward progress. Such deadlock is possible if the application has event
+"loops", in which an event in dequeued from queue A and later enqueued back to
+queue A.
+
+Due to this, workers should stop retrying after a time, release the events it
+is attempting to enqueue, and dequeue more events. It is important that the
+worker release the events and don't simply set them aside to retry the enqueue
+again later, because the port has limited history list size (by default, twice
+the port's dequeue_depth).
+
+Priority
+~~~~~~~~
+
+The DLB2 supports event priority and per-port queue service priority, as
+described in the eventdev header file. The DLB2 does not support 'global' event
+queue priority established at queue creation time.
+
+DLB2 supports 8 event and queue service priority levels. For both priority
+types, the PMD uses the upper three bits of the priority field to determine the
+DLB2 priority, discarding the 5 least significant bits. The 5 least significant
+event priority bits are not preserved when an event is enqueued.
+
+Load-Balanced Queues
+~~~~~~~~~~~~~~~~~~~~
+
+A load-balanced queue can support atomic and ordered scheduling, or atomic and
+unordered scheduling, but not atomic and unordered and ordered scheduling. A
+queue's scheduling types are controlled by the event queue configuration.
+
+If the user sets the ``RTE_EVENT_QUEUE_CFG_ALL_TYPES`` flag, the
+``nb_atomic_order_sequences`` determines the supported scheduling types.
+With non-zero ``nb_atomic_order_sequences``, the queue is configured for atomic
+and ordered scheduling. In this case, ``RTE_SCHED_TYPE_PARALLEL`` scheduling is
+supported by scheduling those events as ordered events.  Note that when the
+event is dequeued, its sched_type will be ``RTE_SCHED_TYPE_ORDERED``. Else if
+``nb_atomic_order_sequences`` is zero, the queue is configured for atomic and
+unordered scheduling. In this case, ``RTE_SCHED_TYPE_ORDERED`` is unsupported.
+
+If the ``RTE_EVENT_QUEUE_CFG_ALL_TYPES`` flag is not set, schedule_type
+dictates the queue's scheduling type.
+
+The ``nb_atomic_order_sequences`` queue configuration field sets the ordered
+queue's reorder buffer size.  DLB2 has 4 groups of ordered queues, where each
+group is configured to contain either 1 queue with 1024 reorder entries, 2
+queues with 512 reorder entries, and so on down to 32 queues with 32 entries.
+
+When a load-balanced queue is created, the PMD will configure a new sequence
+number group on-demand if num_sequence_numbers does not match a pre-existing
+group with available reorder buffer entries. If all sequence number groups are
+in use, no new group will be created and queue configuration will fail. (Note
+that when the PMD is used with a virtual DLB2 device, it cannot change the
+sequence number configuration.)
+
+The queue's ``nb_atomic_flows`` parameter is ignored by the DLB2 PMD, because
+the DLB2 does not limit the number of flows a queue can track. In the DLB2, all
+load-balanced queues can use the full 16-bit flow ID range.
+
+Reconfiguration
+~~~~~~~~~~~~~~~
+
+The Eventdev API allows one to reconfigure a device, its ports, and its queues
+by first stopping the device, calling the configuration function(s), then
+restarting the device. The DLB2 does not support configuring an individual queue
+or port without first reconfiguring the entire device, however, so there are
+certain reconfiguration sequences that are valid in the eventdev API but not
+supported by the PMD.
+
+Specifically, the PMD supports the following configuration sequence:
+1. Configure and start the device
+2. Stop the device
+3. (Optional) Reconfigure the device
+4. (Optional) If step 3 is run:
+
+   a. Setup queue(s). The reconfigured queue(s) lose their previous port links.
+   b. The reconfigured port(s) lose their previous queue links.
+
+5. (Optional, only if steps 4a and 4b are run) Link port(s) to queue(s)
+6. Restart the device. If the device is reconfigured in step 3 but one or more
+   of its ports or queues are not, the PMD will apply their previous
+   configuration (including port->queue links) at this time.
+
+The PMD does not support the following configuration sequences:
+1. Configure and start the device
+2. Stop the device
+3. Setup queue or setup port
+4. Start the device
+
+This sequence is not supported because the event device must be reconfigured
+before its ports or queues can be.
+
+Deferred Scheduling
+~~~~~~~~~~~~~~~~~~~
+
+The DLB2 PMD's default behavior for managing a CQ is to "pop" the CQ once per
+dequeued event before returning from rte_event_dequeue_burst(). This frees the
+corresponding entries in the CQ, which enables the DLB2 to schedule more events
+to it.
+
+To support applications seeking finer-grained scheduling control -- for example
+deferring scheduling to get the best possible priority scheduling and
+load-balancing -- the PMD supports a deferred scheduling mode. In this mode,
+the CQ entry is not popped until the *subsequent* rte_event_dequeue_burst()
+call. This mode only applies to load-balanced event ports with dequeue depth of
+1.
+
+To enable deferred scheduling, use the defer_sched vdev argument like so:
+
+    .. code-block:: console
+
+       --vdev=dlb1_event,defer_sched=on
+
+Atomic Inflights Allocation
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+In the last stage prior to scheduling an atomic event to a CQ, DLB2 holds the
+inflight event in a temporary buffer that is divided among load-balanced
+queues. If a queue's atomic buffer storage fills up, this can result in
+head-of-line-blocking. For example:
+
+- An LDB queue allocated N atomic buffer entries
+- All N entries are filled with events from flow X, which is pinned to CQ 0.
+
+Until CQ 0 releases 1+ events, no other atomic flows for that LDB queue can be
+scheduled. The likelihood of this case depends on the eventdev configuration,
+traffic behavior, event processing latency, potential for a worker to be
+interrupted or otherwise delayed, etc.
+
+By default, the PMD allocates 16 buffer entries for each load-balanced queue,
+which provides an even division across all 128 queues but potentially wastes
+buffer space (e.g. if not all queues are used, or aren't used for atomic
+scheduling).
+
+The PMD provides a dev arg to override the default per-queue allocation. To
+increase a vdev's per-queue atomic-inflight allocation to (for example) 64:
+
+    .. code-block:: console
+
+       --vdev=dlb1_event,atm_inflights=64
+
diff --git a/doc/guides/eventdevs/index.rst b/doc/guides/eventdevs/index.rst
index bb66a5e..55d5ba8 100644
--- a/doc/guides/eventdevs/index.rst
+++ b/doc/guides/eventdevs/index.rst
@@ -18,3 +18,4 @@ application through the eventdev API.
     octeontx
     octeontx2
     opdl
+    dlb2
diff --git a/drivers/event/dlb2/meson.build b/drivers/event/dlb2/meson.build
new file mode 100644
index 0000000..54ba2c8
--- /dev/null
+++ b/drivers/event/dlb2/meson.build
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2019-2020 Intel Corporation
+
+sources = files(
+)
+
+deps += ['mbuf', 'mempool', 'ring', 'pci', 'bus_pci']
diff --git a/drivers/event/dlb2/rte_pmd_dlb2_event_version.map b/drivers/event/dlb2/rte_pmd_dlb2_event_version.map
new file mode 100644
index 0000000..299ae63
--- /dev/null
+++ b/drivers/event/dlb2/rte_pmd_dlb2_event_version.map
@@ -0,0 +1,3 @@
+DPDK_21.0 {
+	local: *;
+};
diff --git a/drivers/event/meson.build b/drivers/event/meson.build
index ebe76a7..01d3b59 100644
--- a/drivers/event/meson.build
+++ b/drivers/event/meson.build
@@ -10,6 +10,9 @@ if not (toolchain == 'gcc' and cc.version().version_compare('<4.8.6') and
 	dpdk_conf.has('RTE_ARCH_ARM64'))
 	drivers += 'octeontx'
 endif
+if (dpdk_conf.has('RTE_ARCH_X86_64') and is_linux)
+        drivers += 'dlb2'
+endif
 std_deps = ['eventdev', 'kvargs']
 config_flag_fmt = 'RTE_LIBRTE_@0@_EVENTDEV_PMD'
 driver_name_fmt = 'rte_pmd_@0@_event'
-- 
2.6.4


  reply	other threads:[~2020-10-17 18:19 UTC|newest]

Thread overview: 366+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-11 20:26 [dpdk-dev] [PATCH 00/22] Add DLB2 PMD Timothy McDaniel
2020-09-11 20:26 ` [dpdk-dev] [PATCH 01/22] event/dlb2: add meson build infrastructure Timothy McDaniel
2020-10-06 15:58   ` Eads, Gage
2020-10-17 18:20   ` [dpdk-dev] [PATCH v2 00/22] Add DLB2 PMD Timothy McDaniel
2020-10-17 18:20     ` Timothy McDaniel [this message]
2020-10-18  8:48       ` [dpdk-dev] [PATCH v2 01/22] event/dlb2: add documentation and meson build infrastructure Jerin Jacob
2020-10-19  8:33         ` Bruce Richardson
2020-10-20 15:17           ` McDaniel, Timothy
2020-10-20 15:20             ` Thomas Monjalon
2020-10-20 15:33               ` McDaniel, Timothy
2020-10-20 15:38                 ` Bruce Richardson
2020-10-20 15:34             ` Bruce Richardson
2020-10-20 15:43               ` McDaniel, Timothy
2020-10-21 16:33           ` McDaniel, Timothy
2020-10-20 14:07         ` McDaniel, Timothy
2020-10-19  9:59       ` Kinsella, Ray
2020-10-30  9:43       ` [dpdk-dev] [PATCH v5 00/23] Add DLB2 PMD Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 01/23] event/dlb2: add documentation and meson build infrastructure Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 02/23] event/dlb2: add dynamic logging Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 03/23] event/dlb2: add private data structures and constants Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 04/23] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 05/23] event/dlb2: add inline functions Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 06/23] event/dlb2: add eventdev probe Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 07/23] event/dlb2: add flexible interface Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 08/23] event/dlb2: add probe-time hardware init Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 09/23] event/dlb2: add xstats Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 10/23] event/dlb2: add infos get and configure Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 11/23] event/dlb2: add queue and port default conf Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 12/23] event/dlb2: add queue setup Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 13/23] event/dlb2: add port setup Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 14/23] event/dlb2: add port link Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 15/23] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 16/23] event/dlb2: add eventdev start Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 17/23] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 18/23] event/dlb2: add dequeue " Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 19/23] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 20/23] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 21/23] event/dlb2: add PMD self-tests Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 22/23] event/dlb2: add queue and port release Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 23/23] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-10-30 10:01         ` [dpdk-dev] [PATCH v5 00/23] Add DLB2 PMD Thomas Monjalon
2020-10-30 10:16           ` McDaniel, Timothy
2020-10-30 10:32             ` Jerin Jacob
2020-10-30 10:43               ` Thomas Monjalon
2020-10-30 11:58             ` McDaniel, Timothy
2020-10-30 13:15               ` Thomas Monjalon
2020-10-30 15:35                 ` McDaniel, Timothy
2020-10-30 15:47                   ` Thomas Monjalon
2020-10-30 16:02                     ` McDaniel, Timothy
2020-10-30 16:42                       ` Thomas Monjalon
2020-10-30 14:21         ` Jerin Jacob
2020-10-30 15:25           ` McDaniel, Timothy
2020-10-30 15:31             ` Jerin Jacob
2020-10-30 16:08               ` Van Haaren, Harry
2020-10-30 16:13                 ` McDaniel, Timothy
2020-10-30 15:33             ` David Marchand
2020-10-30 18:28       ` [dpdk-dev] [PATCH v6 " Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 01/23] event/dlb2: add documentation and meson build infrastructure Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 02/23] event/dlb2: add dynamic logging Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 03/23] event/dlb2: add private data structures and constants Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 04/23] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 05/23] event/dlb2: add inline functions Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 06/23] event/dlb2: add eventdev probe Timothy McDaniel
2020-10-30 19:51           ` Eads, Gage
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 07/23] event/dlb2: add flexible interface Timothy McDaniel
2020-10-30 19:51           ` Eads, Gage
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 08/23] event/dlb2: add probe-time hardware init Timothy McDaniel
2020-10-30 19:50           ` Eads, Gage
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 09/23] event/dlb2: add xstats Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 10/23] event/dlb2: add infos get and configure Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 11/23] event/dlb2: add queue and port default conf Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 12/23] event/dlb2: add queue setup Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 13/23] event/dlb2: add port setup Timothy McDaniel
2020-10-30 18:50           ` Eads, Gage
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 14/23] event/dlb2: add port link Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 15/23] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-10-30 18:29         ` [dpdk-dev] [PATCH v6 16/23] event/dlb2: add eventdev start Timothy McDaniel
2020-10-30 18:29         ` [dpdk-dev] [PATCH v6 17/23] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-10-30 18:29         ` [dpdk-dev] [PATCH v6 18/23] event/dlb2: add dequeue " Timothy McDaniel
2020-10-30 18:29         ` [dpdk-dev] [PATCH v6 19/23] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-10-30 18:29         ` [dpdk-dev] [PATCH v6 20/23] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-10-30 18:29         ` [dpdk-dev] [PATCH v6 21/23] event/dlb2: add PMD self-tests Timothy McDaniel
2020-10-30 18:29         ` [dpdk-dev] [PATCH v6 22/23] event/dlb2: add queue and port release Timothy McDaniel
2020-10-30 18:29         ` [dpdk-dev] [PATCH v6 23/23] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-10-30 23:51       ` [dpdk-dev] [PATCH v7 00/23] Add DLB2 PMD Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 01/23] event/dlb2: add documentation and meson build infrastructure Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 02/23] event/dlb2: add dynamic logging Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 03/23] event/dlb2: add private data structures and constants Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 04/23] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 05/23] event/dlb2: add inline functions Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 06/23] event/dlb2: add eventdev probe Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 07/23] event/dlb2: add flexible interface Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 08/23] event/dlb2: add probe-time hardware init Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 09/23] event/dlb2: add xstats Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 10/23] event/dlb2: add infos get and configure Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 11/23] event/dlb2: add queue and port default conf Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 12/23] event/dlb2: add queue setup Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 13/23] event/dlb2: add port setup Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 14/23] event/dlb2: add port link Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 15/23] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 16/23] event/dlb2: add eventdev start Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 17/23] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 18/23] event/dlb2: add dequeue " Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 19/23] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 20/23] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 21/23] event/dlb2: add PMD self-tests Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 22/23] event/dlb2: add queue and port release Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 23/23] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-10-31  2:01       ` [dpdk-dev] [PATCH v8 00/23] Add DLB2 PMD Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 01/23] event/dlb2: add documentation and meson build infrastructure Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 02/23] event/dlb2: add dynamic logging Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 03/23] event/dlb2: add private data structures and constants Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 04/23] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 05/23] event/dlb2: add inline functions Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 06/23] event/dlb2: add eventdev probe Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 07/23] event/dlb2: add flexible interface Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 08/23] event/dlb2: add probe-time hardware init Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 09/23] event/dlb2: add xstats Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 10/23] event/dlb2: add infos get and configure Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 11/23] event/dlb2: add queue and port default conf Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 12/23] event/dlb2: add queue setup Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 13/23] event/dlb2: add port setup Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 14/23] event/dlb2: add port link Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 15/23] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 16/23] event/dlb2: add eventdev start Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 17/23] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-10-31  9:52           ` Jerin Jacob
2020-10-31 17:13             ` McDaniel, Timothy
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 18/23] event/dlb2: add dequeue " Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 19/23] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 20/23] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-10-31 10:51           ` David Marchand
2020-10-31 16:37             ` McDaniel, Timothy
2020-10-31 19:19               ` McDaniel, Timothy
2020-10-31 21:38                 ` David Marchand
2020-10-31 21:43                   ` McDaniel, Timothy
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 21/23] event/dlb2: add PMD self-tests Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 22/23] event/dlb2: add queue and port release Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 23/23] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-10-31 17:25       ` [dpdk-dev] [PATCH v9 00/23] Add DLB2 PMD Timothy McDaniel
2020-10-31 17:25         ` [dpdk-dev] [PATCH v9 01/23] event/dlb2: add documentation and meson build infrastructure Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 02/23] event/dlb2: add dynamic logging Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 03/23] event/dlb2: add private data structures and constants Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 04/23] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 05/23] event/dlb2: add inline functions Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 06/23] event/dlb2: add eventdev probe Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 07/23] event/dlb2: add flexible interface Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 08/23] event/dlb2: add probe-time hardware init Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 09/23] event/dlb2: add xstats Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 10/23] event/dlb2: add infos get and configure Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 11/23] event/dlb2: add queue and port default conf Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 12/23] event/dlb2: add queue setup Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 13/23] event/dlb2: add port setup Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 14/23] event/dlb2: add port link Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 15/23] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 16/23] event/dlb2: add eventdev start Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 17/23] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 18/23] event/dlb2: add dequeue " Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 19/23] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 20/23] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 21/23] event/dlb2: add PMD self-tests Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 22/23] event/dlb2: add queue and port release Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 23/23] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-11-01 20:00       ` [dpdk-dev] [PATCH v10 00/23] Add DLB2 PMD Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 01/23] event/dlb2: add documentation and meson build infrastructure Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 02/23] event/dlb2: add dynamic logging Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 03/23] event/dlb2: add private data structures and constants Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 04/23] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 05/23] event/dlb2: add inline functions Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 06/23] event/dlb2: add eventdev probe Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 07/23] event/dlb2: add flexible interface Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 08/23] event/dlb2: add probe-time hardware init Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 09/23] event/dlb2: add xstats Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 10/23] event/dlb2: add infos get and configure Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 11/23] event/dlb2: add queue and port default conf Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 12/23] event/dlb2: add queue setup Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 13/23] event/dlb2: add port setup Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 14/23] event/dlb2: add port link Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 15/23] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 16/23] event/dlb2: add eventdev start Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 17/23] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 18/23] event/dlb2: add dequeue " Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 19/23] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 20/23] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 21/23] event/dlb2: add PMD self-tests Timothy McDaniel
2020-11-01 20:01         ` [dpdk-dev] [PATCH v10 22/23] event/dlb2: add queue and port release Timothy McDaniel
2020-11-01 20:01         ` [dpdk-dev] [PATCH v10 23/23] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-11-01 23:37       ` [dpdk-dev] [PATCH v11 00/23] Add DLB2 PMD Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 01/23] event/dlb2: add documentation and meson build infrastructure Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 02/23] event/dlb2: add dynamic logging Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 03/23] event/dlb2: add private data structures and constants Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 04/23] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 05/23] event/dlb2: add inline functions Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 06/23] event/dlb2: add eventdev probe Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 07/23] event/dlb2: add flexible interface Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 08/23] event/dlb2: add probe-time hardware init Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 09/23] event/dlb2: add xstats Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 10/23] event/dlb2: add infos get and configure Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 11/23] event/dlb2: add queue and port default conf Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 12/23] event/dlb2: add queue setup Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 13/23] event/dlb2: add port setup Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 14/23] event/dlb2: add port link Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 15/23] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 16/23] event/dlb2: add eventdev start Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 17/23] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 18/23] event/dlb2: add dequeue " Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 19/23] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-11-01 23:38         ` [dpdk-dev] [PATCH v11 20/23] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-11-01 23:38         ` [dpdk-dev] [PATCH v11 21/23] event/dlb2: add PMD self-tests Timothy McDaniel
2020-11-01 23:38         ` [dpdk-dev] [PATCH v11 22/23] event/dlb2: add queue and port release Timothy McDaniel
2020-11-01 23:38         ` [dpdk-dev] [PATCH v11 23/23] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-11-02  8:49         ` [dpdk-dev] [PATCH v11 00/23] Add DLB2 PMD Jerin Jacob
2020-10-17 18:20     ` [dpdk-dev] [PATCH v2 02/22] event/dlb2: add dynamic logging Timothy McDaniel
2020-10-18  8:57       ` Jerin Jacob
2020-10-20 14:08         ` McDaniel, Timothy
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 03/22] event/dlb2: add private data structures and constants Timothy McDaniel
2020-10-20 14:01       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 04/22] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 05/22] event/dlb2: add inline functions Timothy McDaniel
2020-10-18  8:59       ` Jerin Jacob
2020-10-20 14:08         ` McDaniel, Timothy
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 06/22] event/dlb2: add probe Timothy McDaniel
2020-10-18  8:39       ` Jerin Jacob
2020-10-20 14:04         ` McDaniel, Timothy
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 07/22] event/dlb2: add xstats Timothy McDaniel
2020-10-20 14:01       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 08/22] event/dlb2: add infos get and configure Timothy McDaniel
2020-10-20 14:01       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 09/22] event/dlb2: add queue and port default conf Timothy McDaniel
2020-10-20 14:02       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 10/22] event/dlb2: add queue setup Timothy McDaniel
2020-10-20 14:01       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 11/22] event/dlb2: add port setup Timothy McDaniel
2020-10-20 14:02       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 12/22] event/dlb2: add port link Timothy McDaniel
2020-10-20 14:02       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 13/22] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 14/22] event/dlb2: add eventdev start Timothy McDaniel
2020-10-20 14:04       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 15/22] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 16/22] event/dlb2: add dequeue " Timothy McDaniel
2020-10-20 14:04       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 17/22] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-10-20 14:04       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 18/22] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-10-18  9:13       ` Jerin Jacob
2020-10-20 14:12         ` McDaniel, Timothy
2020-10-19 10:01       ` Kinsella, Ray
2020-10-20 14:05       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 19/22] event/dlb2: add PMD self-tests Timothy McDaniel
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 20/22] event/dlb2: add queue and port release Timothy McDaniel
2020-10-20 14:04       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 21/22] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 22/22] doc: add new DLB2 eventdev driver to relnotes Timothy McDaniel
2020-10-18  9:22       ` Jerin Jacob
2020-10-20 14:13         ` McDaniel, Timothy
2020-10-24 13:06     ` [dpdk-dev] [PATCH v2 00/22] Add DLB2 PMD Thomas Monjalon
2020-10-23 18:30   ` [dpdk-dev] [PATCH v3 00/23] " Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 01/23] event/dlb2: add documentation and meson build infrastructure Timothy McDaniel
2020-10-24 12:58       ` Jerin Jacob
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 02/23] event/dlb2: add dynamic logging Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 03/23] event/dlb2: add private data structures and constants Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 04/23] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 05/23] event/dlb2: add inline functions Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 06/23] event/dlb2: add eventdev probe Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 07/23] event/dlb2: add flexible interface Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 08/23] event/dlb2: add probe-time hardware init Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 09/23] event/dlb2: add xstats Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 10/23] event/dlb2: add infos get and configure Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 11/23] event/dlb2: add queue and port default conf Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 12/23] event/dlb2: add queue setup Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 13/23] event/dlb2: add port setup Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 14/23] event/dlb2: add port link Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 15/23] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 16/23] event/dlb2: add eventdev start Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 17/23] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 18/23] event/dlb2: add dequeue " Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 19/23] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 20/23] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 21/23] event/dlb2: add PMD self-tests Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 22/23] event/dlb2: add queue and port release Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 23/23] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-10-29 15:24   ` [dpdk-dev] [PATCH v4 00/23] Add DLB2 PMD Timothy McDaniel
2020-10-29 15:24     ` [dpdk-dev] [PATCH v4 01/23] event/dlb2: add documentation and meson build infrastructure Timothy McDaniel
2020-10-29 15:24     ` [dpdk-dev] [PATCH v4 02/23] event/dlb2: add dynamic logging Timothy McDaniel
2020-10-29 15:24     ` [dpdk-dev] [PATCH v4 03/23] event/dlb2: add private data structures and constants Timothy McDaniel
2020-10-29 15:29       ` Stephen Hemminger
2020-10-29 16:07         ` McDaniel, Timothy
2020-10-29 15:30       ` Stephen Hemminger
2020-10-29 16:10         ` McDaniel, Timothy
2020-10-29 15:24     ` [dpdk-dev] [PATCH v4 04/23] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-10-29 15:24     ` [dpdk-dev] [PATCH v4 05/23] event/dlb2: add inline functions Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 06/23] event/dlb2: add eventdev probe Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 07/23] event/dlb2: add flexible interface Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 08/23] event/dlb2: add probe-time hardware init Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 09/23] event/dlb2: add xstats Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 10/23] event/dlb2: add infos get and configure Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 11/23] event/dlb2: add queue and port default conf Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 12/23] event/dlb2: add queue setup Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 13/23] event/dlb2: add port setup Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 14/23] event/dlb2: add port link Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 15/23] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 16/23] event/dlb2: add eventdev start Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 17/23] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 18/23] event/dlb2: add dequeue " Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 19/23] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 20/23] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 21/23] event/dlb2: add PMD self-tests Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 22/23] event/dlb2: add queue and port release Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 23/23] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-09-11 20:26 ` [dpdk-dev] [PATCH 02/22] event/dlb2: add dynamic logging Timothy McDaniel
2020-10-06 16:52   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 03/22] event/dlb2: add private data structures and constants Timothy McDaniel
2020-10-06 16:52   ` Eads, Gage
2020-10-07 16:14   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 04/22] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-10-06 19:26   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 05/22] event/dlb2: add inline functions Timothy McDaniel
2020-10-06 21:33   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 06/22] event/dlb2: add probe Timothy McDaniel
2020-10-07 16:56   ` Eads, Gage
2020-10-18  9:05   ` Jerin Jacob
2020-10-20 14:11     ` McDaniel, Timothy
2020-09-11 20:26 ` [dpdk-dev] [PATCH 07/22] event/dlb2: add xstats Timothy McDaniel
2020-09-17 20:58   ` Chen, Mike Ximing
2020-09-17 21:26     ` McDaniel, Timothy
2020-09-18  0:37       ` Chen, Mike Ximing
2020-09-18  8:39         ` Bruce Richardson
2020-10-07 18:47   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 08/22] event/dlb2: add infos get and configure Timothy McDaniel
2020-10-07 19:14   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 09/22] event/dlb2: add queue and port default conf Timothy McDaniel
2020-10-07 19:15   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 10/22] event/dlb2: add queue setup Timothy McDaniel
2020-10-07 19:26   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 11/22] event/dlb2: add port setup Timothy McDaniel
2020-10-07 20:34   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 12/22] event/dlb2: add port link Timothy McDaniel
2020-10-07 20:40   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 13/22] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-10-07 20:44   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 14/22] event/dlb2: add eventdev start Timothy McDaniel
2020-10-07 20:51   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 15/22] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-10-07 21:02   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 16/22] event/dlb2: add dequeue " Timothy McDaniel
2020-10-07 21:18   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 17/22] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-10-07 21:21   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 18/22] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-10-07 21:24   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 19/22] event/dlb2: add PMD self-tests Timothy McDaniel
2020-10-07 21:33   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 20/22] event/dlb2: add queue and port release Timothy McDaniel
2020-10-07 21:55   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 21/22] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-10-07 21:58   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 22/22] doc: add new DLB2 eventdev driver to relnotes Timothy McDaniel
2020-10-07 22:04   ` Eads, Gage
2020-09-21 17:11 ` [dpdk-dev] [PATCH 00/22] Add DLB2 PMD Jerin Jacob
2020-09-21 17:15   ` McDaniel, Timothy
2020-09-29 18:41     ` Jerin Jacob
2020-09-29 18:46       ` McDaniel, Timothy
2020-09-30 16:10       ` McDaniel, Timothy
2020-09-29 18:46 ` Jerin Jacob
2020-09-30 16:14   ` McDaniel, Timothy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1602958879-8558-2-git-send-email-timothy.mcdaniel@intel.com \
    --to=timothy.mcdaniel@intel.com \
    --cc=bruce.richardson@intel.com \
    --cc=dev@dpdk.org \
    --cc=erik.g.carrillo@intel.com \
    --cc=gage.eads@intel.com \
    --cc=harry.van.haaren@intel.com \
    --cc=jerinj@marvell.com \
    --cc=john.mcnamara@intel.com \
    --cc=marko.kovacevic@intel.com \
    --cc=mdr@ashroe.eu \
    --cc=nhorman@tuxdriver.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).