DPDK patches and discussions
 help / color / mirror / Atom feed
From: "谢华伟(此时此刻)" <huawei.xhw@alibaba-inc.com>
To: ferruh.yigit@intel.com
Cc: <dev@dpdk.org>, <maxime.coquelin@redhat.com>,
	<anatoly.burakov@intel.com>, <david.marchand@redhat.com>,
	<zhihong.wang@intel.com>, <chenbo.xia@intel.com>,
	<grive@u256.net>, "谢华伟(此时此刻)" <huawei.xhw@alibaba-inc.com>
Subject: [dpdk-dev] [PATCH v5 1/3] PCI: use PCI standard sysfs entry to get PIO address
Date: Thu, 22 Oct 2020 23:51:23 +0800
Message-ID: <1603381885-88819-2-git-send-email-huawei.xhw@alibaba-inc.com> (raw)
In-Reply-To: <1603381885-88819-1-git-send-email-huawei.xhw@alibaba-inc.com>

From: "huawei.xhw" <huawei.xhw@alibaba-inc.com>

Previously with igb_uio we get PIO address from igb_uio sysfs entry, with
uio_pci_generic, we get PIO address from /proc/ioports.

Signed-off-by: huawei.xhw <huawei.xhw@alibaba-inc.com>
---
 drivers/bus/pci/linux/pci.c     | 77 -----------------------------------------
 drivers/bus/pci/linux/pci_uio.c | 64 ++++++++++++++++++++++++----------
 2 files changed, 46 insertions(+), 95 deletions(-)

diff --git a/drivers/bus/pci/linux/pci.c b/drivers/bus/pci/linux/pci.c
index 2e1808b..0f38abf 100644
--- a/drivers/bus/pci/linux/pci.c
+++ b/drivers/bus/pci/linux/pci.c
@@ -677,71 +677,6 @@ int rte_pci_write_config(const struct rte_pci_device *device,
 	}
 }
 
-#if defined(RTE_ARCH_X86)
-static int
-pci_ioport_map(struct rte_pci_device *dev, int bar __rte_unused,
-		struct rte_pci_ioport *p)
-{
-	uint16_t start, end;
-	FILE *fp;
-	char *line = NULL;
-	char pci_id[16];
-	int found = 0;
-	size_t linesz;
-
-	if (rte_eal_iopl_init() != 0) {
-		RTE_LOG(ERR, EAL, "%s(): insufficient ioport permissions for PCI device %s\n",
-			__func__, dev->name);
-		return -1;
-	}
-
-	snprintf(pci_id, sizeof(pci_id), PCI_PRI_FMT,
-		 dev->addr.domain, dev->addr.bus,
-		 dev->addr.devid, dev->addr.function);
-
-	fp = fopen("/proc/ioports", "r");
-	if (fp == NULL) {
-		RTE_LOG(ERR, EAL, "%s(): can't open ioports\n", __func__);
-		return -1;
-	}
-
-	while (getdelim(&line, &linesz, '\n', fp) > 0) {
-		char *ptr = line;
-		char *left;
-		int n;
-
-		n = strcspn(ptr, ":");
-		ptr[n] = 0;
-		left = &ptr[n + 1];
-
-		while (*left && isspace(*left))
-			left++;
-
-		if (!strncmp(left, pci_id, strlen(pci_id))) {
-			found = 1;
-
-			while (*ptr && isspace(*ptr))
-				ptr++;
-
-			sscanf(ptr, "%04hx-%04hx", &start, &end);
-
-			break;
-		}
-	}
-
-	free(line);
-	fclose(fp);
-
-	if (!found)
-		return -1;
-
-	p->base = start;
-	RTE_LOG(DEBUG, EAL, "PCI Port IO found start=0x%x\n", start);
-
-	return 0;
-}
-#endif
-
 int
 rte_pci_ioport_map(struct rte_pci_device *dev, int bar,
 		struct rte_pci_ioport *p)
@@ -756,14 +691,8 @@ int rte_pci_write_config(const struct rte_pci_device *device,
 		break;
 #endif
 	case RTE_PCI_KDRV_IGB_UIO:
-		ret = pci_uio_ioport_map(dev, bar, p);
-		break;
 	case RTE_PCI_KDRV_UIO_GENERIC:
-#if defined(RTE_ARCH_X86)
-		ret = pci_ioport_map(dev, bar, p);
-#else
 		ret = pci_uio_ioport_map(dev, bar, p);
-#endif
 		break;
 	default:
 		break;
@@ -830,14 +759,8 @@ int rte_pci_write_config(const struct rte_pci_device *device,
 		break;
 #endif
 	case RTE_PCI_KDRV_IGB_UIO:
-		ret = pci_uio_ioport_unmap(p);
-		break;
 	case RTE_PCI_KDRV_UIO_GENERIC:
-#if defined(RTE_ARCH_X86)
-		ret = 0;
-#else
 		ret = pci_uio_ioport_unmap(p);
-#endif
 		break;
 	default:
 		break;
diff --git a/drivers/bus/pci/linux/pci_uio.c b/drivers/bus/pci/linux/pci_uio.c
index f3305a2..01f2a40 100644
--- a/drivers/bus/pci/linux/pci_uio.c
+++ b/drivers/bus/pci/linux/pci_uio.c
@@ -373,10 +373,13 @@
 pci_uio_ioport_map(struct rte_pci_device *dev, int bar,
 		   struct rte_pci_ioport *p)
 {
+	FILE *f = NULL;
 	char dirname[PATH_MAX];
 	char filename[PATH_MAX];
-	int uio_num;
-	unsigned long start;
+	char buf[BUFSIZ];
+	uint64_t phys_addr, end_addr, flags;
+	unsigned long base;
+	int i;
 
 	if (rte_eal_iopl_init() != 0) {
 		RTE_LOG(ERR, EAL, "%s(): insufficient ioport permissions for PCI device %s\n",
@@ -384,41 +387,66 @@
 		return -1;
 	}
 
-	uio_num = pci_get_uio_dev(dev, dirname, sizeof(dirname), 0);
-	if (uio_num < 0)
+	/* open and read addresses of the corresponding resource in sysfs */
+	snprintf(filename, sizeof(filename), "%s/" PCI_PRI_FMT "/resource",
+		rte_pci_get_sysfs_path(), dev->addr.domain, dev->addr.bus,
+		dev->addr.devid, dev->addr.function);
+	f = fopen(filename, "r");
+	if (f == NULL) {
+		RTE_LOG(ERR, EAL, "%s(): Cannot open sysfs resource: %s\n",
+			__func__, strerror(errno));
 		return -1;
+	}
 
-	/* get portio start */
-	snprintf(filename, sizeof(filename),
-		 "%s/portio/port%d/start", dirname, bar);
-	if (eal_parse_sysfs_value(filename, &start) < 0) {
-		RTE_LOG(ERR, EAL, "%s(): cannot parse portio start\n",
-			__func__);
-		return -1;
+	for (i = 0; i < bar + 1; i++) {
+		if (fgets(buf, sizeof(buf), f) == NULL) {
+			RTE_LOG(ERR, EAL, "%s(): Cannot read sysfs resource\n", __func__);
+			goto error;
+		}
 	}
-	/* ensure we don't get anything funny here, read/write will cast to
-	 * uin16_t */
-	if (start > UINT16_MAX)
-		return -1;
+	if (pci_parse_one_sysfs_resource(buf, sizeof(buf), &phys_addr,
+		&end_addr, &flags) < 0)
+		goto error;
+
+	if (!(flags & IORESOURCE_IO)) {
+		RTE_LOG(ERR, EAL, "%s(): bar resource other than IO is not supported\n", __func__);
+		goto error;
+	}
+	base = (unsigned long)phys_addr;
+	RTE_LOG(INFO, EAL, "%s(): PIO BAR %08lx detected\n", __func__, base);
+
+	if (base > UINT16_MAX)
+		goto error;
 
 	/* FIXME only for primary process ? */
 	if (dev->intr_handle.type == RTE_INTR_HANDLE_UNKNOWN) {
+		int uio_num = pci_get_uio_dev(dev, dirname, sizeof(dirname), 0);
+		if (uio_num < 0) {
+			RTE_LOG(ERR, EAL, "cannot open %s: %s\n",
+				dirname, strerror(errno));
+			goto error;
+		}
 
 		snprintf(filename, sizeof(filename), "/dev/uio%u", uio_num);
 		dev->intr_handle.fd = open(filename, O_RDWR);
 		if (dev->intr_handle.fd < 0) {
 			RTE_LOG(ERR, EAL, "Cannot open %s: %s\n",
 				filename, strerror(errno));
-			return -1;
+			goto error;
 		}
 		dev->intr_handle.type = RTE_INTR_HANDLE_UIO;
 	}
 
-	RTE_LOG(DEBUG, EAL, "PCI Port IO found start=0x%lx\n", start);
+	RTE_LOG(DEBUG, EAL, "PCI Port IO found start=0x%lx\n", base);
 
-	p->base = start;
+	p->base = base;
 	p->len = 0;
+	fclose(f);
 	return 0;
+error:
+	if (f)
+		fclose(f);
+	return -1;
 }
 #else
 int
-- 
1.8.3.1

  reply	other threads:[~2020-10-22 15:51 UTC|newest]

Thread overview: 58+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-30 14:59 [dpdk-dev] [PATCH v2] pci: support both PIO and MMIO BAR for legacy virtio on x86 谢华伟(此时此刻)
2020-10-01 10:22 ` Burakov, Anatoly
2020-10-02  5:44   ` 谢华伟(此时此刻)
2020-10-09  8:36 ` [dpdk-dev] [PATCH v3] " 谢华伟(此时此刻)
2020-10-13  8:41 ` [dpdk-dev] [PATCH v4] support both PIO and MMIO bar for virtio pci device 谢华伟(此时此刻)
2020-10-13  8:41   ` [dpdk-dev] [PATCH v4] pci: support both PIO and MMIO BAR for legacy virtio on x86 谢华伟(此时此刻)
2020-10-13 12:34     ` 谢华伟(此时此刻)
2020-10-21  8:46     ` 谢华伟(此时此刻)
2020-10-21 11:49     ` Ferruh Yigit
2020-10-21 12:32       ` 谢华伟(此时此刻)
2020-10-21 17:24         ` Ferruh Yigit
2020-10-22  9:15           ` 谢华伟(此时此刻)
2020-10-22  9:44             ` Ferruh Yigit
2020-10-22  9:57               ` 谢华伟(此时此刻)
2020-10-22 15:51 ` [dpdk-dev] [PATCH v5 0/3] support both PIO and MMIO BAR for virtio PMD 谢华伟(此时此刻)
2020-10-22 15:51   ` 谢华伟(此时此刻) [this message]
2021-01-12  8:07     ` [dpdk-dev] [PATCH v5 1/3] PCI: use PCI standard sysfs entry to get PIO address Maxime Coquelin
2021-01-14 18:23       ` 谢华伟(此时此刻)
2021-01-24 15:10         ` Xueming(Steven) Li
2020-10-22 15:51   ` [dpdk-dev] [PATCH v5 2/3] PCI: support MMIO in rte_pci_ioport_map/unap/read/write 谢华伟(此时此刻)
2021-01-12  8:23     ` Maxime Coquelin
2021-01-21  6:30       ` 谢华伟(此时此刻)
2021-01-24 15:22     ` Xueming(Steven) Li
2021-01-25  3:08       ` 谢华伟(此时此刻)
2021-01-27 10:40     ` Ferruh Yigit
2021-01-27 15:34       ` 谢华伟(此时此刻)
2021-01-27 16:45         ` Ferruh Yigit
2020-10-22 15:51   ` [dpdk-dev] [PATCH v5 3/3] PCI: don't use vfio ioctl call to access PIO resource 谢华伟(此时此刻)
2021-01-12  9:37     ` Maxime Coquelin
2021-01-12 16:58       ` Maxime Coquelin
2021-01-20 14:54         ` 谢华伟(此时此刻)
2021-01-21  8:29           ` Maxime Coquelin
2021-01-21 14:57             ` 谢华伟(此时此刻)
2021-01-21 15:00               ` 谢华伟(此时此刻)
2021-01-21 15:38               ` Maxime Coquelin
2021-01-22  7:25                 ` 谢华伟(此时此刻)
2021-01-26 10:44                   ` Maxime Coquelin
2021-01-27 10:32                     ` Ferruh Yigit
2021-01-27 12:17                       ` Maxime Coquelin
2021-01-27 14:43                       ` 谢华伟(此时此刻)
2021-01-27 16:45                         ` Ferruh Yigit
2021-01-28 13:43                           ` 谢华伟(此时此刻)
2021-01-26 12:30                   ` 谢华伟(此时此刻)
2021-01-26 12:35                     ` Maxime Coquelin
2021-01-26 14:24                       ` 谢华伟(此时此刻)
2020-10-27  8:50   ` [dpdk-dev] [PATCH v5 0/3] support both PIO and MMIO BAR for virtio PMD 谢华伟(此时此刻)
2020-10-28  3:48     ` 谢华伟(此时此刻)
2020-11-02 11:56   ` 谢华伟(此时此刻)
2020-11-10 12:35   ` 谢华伟(此时此刻)
2020-11-10 12:42     ` David Marchand
2020-11-12 13:35       ` 谢华伟(此时此刻)
2020-12-14 14:24       ` 谢华伟(此时此刻)
2020-12-16  7:54         ` Maxime Coquelin
2021-01-12 17:37   ` Maxime Coquelin
2021-01-14 18:19     ` 谢华伟(此时此刻)
2021-01-21  4:12     ` 谢华伟(此时此刻)
2021-01-21  8:47       ` Maxime Coquelin
2021-01-21 13:51         ` 谢华伟(此时此刻)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1603381885-88819-2-git-send-email-huawei.xhw@alibaba-inc.com \
    --to=huawei.xhw@alibaba-inc.com \
    --cc=anatoly.burakov@intel.com \
    --cc=chenbo.xia@intel.com \
    --cc=david.marchand@redhat.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=grive@u256.net \
    --cc=maxime.coquelin@redhat.com \
    --cc=zhihong.wang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK patches and discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ http://inbox.dpdk.org/dev \
		dev@dpdk.org
	public-inbox-index dev

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git