From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mails.dpdk.org (mails.dpdk.org [217.70.189.124]) by inbox.dpdk.org (Postfix) with ESMTP id 1B88DA056A; Thu, 11 Mar 2021 10:07:15 +0100 (CET) Received: from [217.70.189.124] (localhost [127.0.0.1]) by mails.dpdk.org (Postfix) with ESMTP id 8DF4B40689; Thu, 11 Mar 2021 10:07:14 +0100 (CET) Received: from szxga06-in.huawei.com (szxga06-in.huawei.com [45.249.212.32]) by mails.dpdk.org (Postfix) with ESMTP id 995EF4003D for ; Thu, 11 Mar 2021 10:07:12 +0100 (CET) Received: from DGGEMS403-HUB.china.huawei.com (unknown [172.30.72.58]) by szxga06-in.huawei.com (SkyGuard) with ESMTP id 4Dx32G1p3VzkWp4 for ; Thu, 11 Mar 2021 17:05:42 +0800 (CST) Received: from localhost.localdomain (10.69.192.56) by DGGEMS403-HUB.china.huawei.com (10.3.19.203) with Microsoft SMTP Server id 14.3.498.0; Thu, 11 Mar 2021 17:07:05 +0800 From: "Min Hu (Connor)" To: CC: Date: Thu, 11 Mar 2021 17:07:43 +0800 Message-ID: <1615453663-60366-1-git-send-email-humin29@huawei.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1614906276-34293-1-git-send-email-oulijun@huawei.com> References: <1614906276-34293-1-git-send-email-oulijun@huawei.com> MIME-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 8bit X-Originating-IP: [10.69.192.56] X-CFilter-Loop: Reflected Subject: [dpdk-dev] [PATCH v3] app/testpmd: support multi-process X-BeenThere: dev@dpdk.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: DPDK patches and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dev-bounces@dpdk.org Sender: "dev" From: Lijun Ou This patch adds multi-process support for testpmd. The test cmd example as follows: the primary cmd: ./dpdk-testpmd -a xxx --proc-type=auto -l 0-1 -- -i \ --rxq=4 --txq=4 --num-procs=2 --proc-id=0 the secondary cmd: ./dpdk-testpmd -a xxx --proc-type=auto -l 2-3 -- -i \ --rxq=4 --txq=4 --num-procs=2 --proc-id=1 Signed-off-by: Min Hu (Connor) Signed-off-by: Lijun Ou --- app/test-pmd/cmdline.c | 12 ++- app/test-pmd/config.c | 9 ++- app/test-pmd/parameters.c | 11 +++ app/test-pmd/testpmd.c | 138 ++++++++++++++++++++++------------ app/test-pmd/testpmd.h | 7 ++ doc/guides/testpmd_app_ug/run_app.rst | 69 +++++++++++++++++ 6 files changed, 196 insertions(+), 50 deletions(-) diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c index 14110eb..287d7a0 100644 --- a/app/test-pmd/cmdline.c +++ b/app/test-pmd/cmdline.c @@ -71,8 +71,6 @@ #include "cmdline_tm.h" #include "bpf_cmd.h" -static struct cmdline *testpmd_cl; - static void cmd_reconfig_device_queue(portid_t id, uint8_t dev, uint8_t queue); /* *** Help command with introduction. *** */ @@ -5351,6 +5349,12 @@ cmd_set_flush_rx_parsed(void *parsed_result, __rte_unused void *data) { struct cmd_set_flush_rx *res = parsed_result; + + if (num_procs > 1 && (strcmp(res->mode, "on") == 0)) { + printf("multi-process doesn't support to flush rx queues.\n"); + return; + } + no_flush_rx = (uint8_t)((strcmp(res->mode, "on") == 0) ? 0 : 1); } @@ -17227,6 +17231,10 @@ prompt(void) printf("Cannot set exit function for cmdline\n"); cmdline_interact(testpmd_cl); + if (unlikely(f_quit == 1)) { + dup2(testpmd_fd_copy, testpmd_cl->s_in); + close(testpmd_fd_copy); + } if (ret != 0) cmdline_stdin_exit(testpmd_cl); } diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c index 576d5ac..9edf84a 100644 --- a/app/test-pmd/config.c +++ b/app/test-pmd/config.c @@ -2827,6 +2827,8 @@ rss_fwd_config_setup(void) queueid_t rxq; queueid_t nb_q; streamid_t sm_id; + int start; + int end; nb_q = nb_rxq; if (nb_q > nb_txq) @@ -2844,7 +2846,10 @@ rss_fwd_config_setup(void) init_fwd_streams(); setup_fwd_config_of_each_lcore(&cur_fwd_config); - rxp = 0; rxq = 0; + start = proc_id * nb_q / num_procs; + end = start + nb_q / num_procs; + rxp = 0; + rxq = start; for (sm_id = 0; sm_id < cur_fwd_config.nb_fwd_streams; sm_id++) { struct fwd_stream *fs; @@ -2861,6 +2866,8 @@ rss_fwd_config_setup(void) continue; rxp = 0; rxq++; + if (rxq >= end) + rxq = start; } } diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c index c8acd5d..1a5bf25 100644 --- a/app/test-pmd/parameters.c +++ b/app/test-pmd/parameters.c @@ -45,6 +45,8 @@ #include #include "testpmd.h" +#define PARAM_PROC_ID "proc-id" +#define PARAM_NUM_PROCS "num-procs" static void usage(char* progname) @@ -605,6 +607,8 @@ launch_args_parse(int argc, char** argv) { "rx-mq-mode", 1, 0, 0 }, { "record-core-cycles", 0, 0, 0 }, { "record-burst-stats", 0, 0, 0 }, + { PARAM_NUM_PROCS, 1, 0, 0 }, + { PARAM_PROC_ID, 1, 0, 0 }, { 0, 0, 0, 0 }, }; @@ -1366,6 +1370,13 @@ launch_args_parse(int argc, char** argv) record_core_cycles = 1; if (!strcmp(lgopts[opt_idx].name, "record-burst-stats")) record_burst_stats = 1; + + if (strncmp(lgopts[opt_idx].name, + PARAM_NUM_PROCS, 8) == 0) + num_procs = atoi(optarg); + if (strncmp(lgopts[opt_idx].name, + PARAM_PROC_ID, 7) == 0) + proc_id = atoi(optarg); break; case 'h': usage(argv[0]); diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c index 1a57324..bbd45d9 100644 --- a/app/test-pmd/testpmd.c +++ b/app/test-pmd/testpmd.c @@ -63,6 +63,8 @@ #include "testpmd.h" +int testpmd_fd_copy = 500; /* the copy of STDIN_FILENO */ + #ifndef MAP_HUGETLB /* FreeBSD may not have MAP_HUGETLB (in fact, it probably doesn't) */ #define HUGE_FLAG (0x40000) @@ -125,6 +127,9 @@ uint8_t port_numa[RTE_MAX_ETHPORTS]; */ uint8_t rxring_numa[RTE_MAX_ETHPORTS]; +int proc_id; +unsigned int num_procs = 1; + /* * Store specified sockets on which TX ring to be used by ports * is allocated. @@ -982,16 +987,26 @@ mbuf_pool_create(uint16_t mbuf_seg_size, unsigned nb_mbuf, /* wrapper to rte_mempool_create() */ TESTPMD_LOG(INFO, "preferred mempool ops selected: %s\n", rte_mbuf_best_mempool_ops()); - rte_mp = rte_pktmbuf_pool_create(pool_name, nb_mbuf, - mb_mempool_cache, 0, mbuf_seg_size, socket_id); + if (rte_eal_process_type() == RTE_PROC_PRIMARY) + rte_mp = rte_pktmbuf_pool_create(pool_name, + nb_mbuf, mb_mempool_cache, 0, + mbuf_seg_size, socket_id); + else + rte_mp = rte_mempool_lookup(pool_name); + break; } case MP_ALLOC_ANON: { - rte_mp = rte_mempool_create_empty(pool_name, nb_mbuf, - mb_size, (unsigned int) mb_mempool_cache, - sizeof(struct rte_pktmbuf_pool_private), - socket_id, mempool_flags); + if (rte_eal_process_type() == RTE_PROC_PRIMARY) + rte_mp = rte_mempool_create_empty(pool_name, + nb_mbuf, mb_size, + (unsigned int)mb_mempool_cache, + sizeof(struct rte_pktmbuf_pool_private), + socket_id, mempool_flags); + else + rte_mp = rte_mempool_lookup(pool_name); + if (rte_mp == NULL) goto err; @@ -1021,9 +1036,13 @@ mbuf_pool_create(uint16_t mbuf_seg_size, unsigned nb_mbuf, TESTPMD_LOG(INFO, "preferred mempool ops selected: %s\n", rte_mbuf_best_mempool_ops()); - rte_mp = rte_pktmbuf_pool_create(pool_name, nb_mbuf, - mb_mempool_cache, 0, mbuf_seg_size, - heap_socket); + if (rte_eal_process_type() == RTE_PROC_PRIMARY) + rte_mp = rte_pktmbuf_pool_create(pool_name, + nb_mbuf, mb_mempool_cache, 0, + mbuf_seg_size, heap_socket); + else + rte_mp = rte_mempool_lookup(pool_name); + break; } case MP_ALLOC_XBUF: @@ -1994,6 +2013,12 @@ flush_fwd_rx_queues(void) uint64_t prev_tsc = 0, diff_tsc, cur_tsc, timer_tsc = 0; uint64_t timer_period; + if (num_procs > 1) { + printf("multi-process not support for flushing fwd rx " + "queues, skip the below lines and return.\n"); + return; + } + /* convert to number of cycles */ timer_period = rte_get_timer_hz(); /* 1 second timeout */ @@ -2503,21 +2528,28 @@ start_port(portid_t pid) return -1; } /* configure port */ - diag = rte_eth_dev_configure(pi, nb_rxq + nb_hairpinq, + if (rte_eal_process_type() == RTE_PROC_PRIMARY) { + diag = rte_eth_dev_configure(pi, + nb_rxq + nb_hairpinq, nb_txq + nb_hairpinq, &(port->dev_conf)); - if (diag != 0) { - if (rte_atomic16_cmpset(&(port->port_status), - RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0) - printf("Port %d can not be set back " - "to stopped\n", pi); - printf("Fail to configure port %d\n", pi); - /* try to reconfigure port next time */ - port->need_reconfig = 1; - return -1; + if (diag != 0) { + if (rte_atomic16_cmpset( + &(port->port_status), + RTE_PORT_HANDLING, + RTE_PORT_STOPPED) == 0) + printf("Port %d can not be set " + "back to stopped\n", pi); + printf("Fail to configure port %d\n", + pi); + /* try to reconfigure port next time */ + port->need_reconfig = 1; + return -1; + } } } - if (port->need_reconfig_queues > 0) { + if (port->need_reconfig_queues > 0 && + rte_eal_process_type() == RTE_PROC_PRIMARY) { port->need_reconfig_queues = 0; /* setup tx queues */ for (qi = 0; qi < nb_txq; qi++) { @@ -2618,15 +2650,18 @@ start_port(portid_t pid) cnt_pi++; /* start port */ - if (rte_eth_dev_start(pi) < 0) { - printf("Fail to start port %d\n", pi); + if (rte_eal_process_type() == RTE_PROC_PRIMARY) { + diag = rte_eth_dev_start(pi); + if (diag < 0) { + printf("Fail to start port %d\n", pi); - /* Fail to setup rx queue, return */ - if (rte_atomic16_cmpset(&(port->port_status), - RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0) - printf("Port %d can not be set back to " + /* Fail to setup rx queue, return */ + if (rte_atomic16_cmpset(&(port->port_status), + RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0) + printf("Port %d can not be set back to " "stopped\n", pi); - continue; + continue; + } } if (rte_atomic16_cmpset(&(port->port_status), @@ -2755,7 +2790,8 @@ stop_port(portid_t pid) if (port->flow_list) port_flow_flush(pi); - if (rte_eth_dev_stop(pi) != 0) + if (rte_eal_process_type() == RTE_PROC_PRIMARY && + rte_eth_dev_stop(pi) != 0) RTE_LOG(ERR, EAL, "rte_eth_dev_stop failed for port %u\n", pi); @@ -2824,8 +2860,10 @@ close_port(portid_t pid) continue; } - port_flow_flush(pi); - rte_eth_dev_close(pi); + if (rte_eal_process_type() == RTE_PROC_PRIMARY) + port_flow_flush(pi); + if (rte_eal_process_type() == RTE_PROC_PRIMARY) + rte_eth_dev_close(pi); } remove_invalid_ports(); @@ -3089,7 +3127,7 @@ pmd_test_exit(void) } } for (i = 0 ; i < RTE_DIM(mempools) ; i++) { - if (mempools[i]) + if (rte_eal_process_type() == RTE_PROC_PRIMARY && mempools[i]) rte_mempool_free(mempools[i]); } @@ -3611,6 +3649,10 @@ init_port_dcb_config(portid_t pid, int retval; uint16_t i; + if (num_procs > 1) { + printf("The multi-process feature doesn't support dcb.\n"); + return -ENOTSUP; + } rte_port = &ports[pid]; memset(&port_conf, 0, sizeof(struct rte_eth_conf)); @@ -3709,13 +3751,6 @@ init_port(void) } static void -force_quit(void) -{ - pmd_test_exit(); - prompt_exit(); -} - -static void print_stats(void) { uint8_t i; @@ -3746,12 +3781,16 @@ signal_handler(int signum) if (latencystats_enabled != 0) rte_latencystats_uninit(); #endif - force_quit(); /* Set flag to indicate the force termination. */ f_quit = 1; - /* exit with the expected status */ - signal(signum, SIG_DFL); - kill(getpid(), signum); + if (interactive == 1) { + dup2(testpmd_cl->s_in, testpmd_fd_copy); + close(testpmd_cl->s_in); + } else { + dup2(0, testpmd_fd_copy); + close(0); + } + } } @@ -3776,10 +3815,6 @@ main(int argc, char** argv) rte_exit(EXIT_FAILURE, "Cannot init EAL: %s\n", rte_strerror(rte_errno)); - if (rte_eal_process_type() == RTE_PROC_SECONDARY) - rte_exit(EXIT_FAILURE, - "Secondary process type not supported.\n"); - ret = register_eth_event_callback(); if (ret != 0) rte_exit(EXIT_FAILURE, "Cannot register for ethdev events"); @@ -3875,8 +3910,10 @@ main(int argc, char** argv) } } - if (!no_device_start && start_port(RTE_PORT_ALL) != 0) + if (!no_device_start && start_port(RTE_PORT_ALL) != 0) { + pmd_test_exit(); rte_exit(EXIT_FAILURE, "Start ports failed\n"); + } /* set all ports to promiscuous mode by default */ RTE_ETH_FOREACH_DEV(port_id) { @@ -3922,6 +3959,8 @@ main(int argc, char** argv) } prompt(); pmd_test_exit(); + if (unlikely(f_quit == 1)) + prompt_exit(); } else #endif { @@ -3957,6 +3996,11 @@ main(int argc, char** argv) printf("Press enter to exit\n"); rc = read(0, &c, 1); pmd_test_exit(); + if (unlikely(f_quit == 1)) { + dup2(testpmd_fd_copy, 0); + close(testpmd_fd_copy); + prompt_exit(); + } if (rc < 0) return 1; } diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h index ce83f31..6d13417 100644 --- a/app/test-pmd/testpmd.h +++ b/app/test-pmd/testpmd.h @@ -13,6 +13,7 @@ #include #include #include +#include "cmdline.h" #define RTE_PORT_ALL (~(portid_t)0x0) @@ -24,6 +25,10 @@ #define RTE_PORT_CLOSED (uint16_t)2 #define RTE_PORT_HANDLING (uint16_t)3 +uint8_t f_quit; +int testpmd_fd_copy; +struct cmdline *testpmd_cl; + /* * It is used to allocate the memory for hash key. * The hash key size is NIC dependent. @@ -422,6 +427,8 @@ extern uint64_t noisy_lkup_mem_sz; extern uint64_t noisy_lkup_num_writes; extern uint64_t noisy_lkup_num_reads; extern uint64_t noisy_lkup_num_reads_writes; +extern int proc_id; +extern unsigned int num_procs; extern uint8_t dcb_config; extern uint8_t dcb_test; diff --git a/doc/guides/testpmd_app_ug/run_app.rst b/doc/guides/testpmd_app_ug/run_app.rst index 6745072..8e27fcd 100644 --- a/doc/guides/testpmd_app_ug/run_app.rst +++ b/doc/guides/testpmd_app_ug/run_app.rst @@ -536,3 +536,72 @@ The command line options are: bit 1 - two hairpin ports paired bit 0 - two hairpin ports loop The default value is 0. Hairpin will use single port mode and implicit Tx flow mode. + + +Testpmd Support Multi Process Command-line Options +-------------------------------------------------- + +The following are the command-line options for the testpmd applications(support multi process). +They must be separated from the EAL options, shown in the previous section, with a ``--`` separator: + +.. code-block:: console + + primary process: + sudo ./dpdk-testpmd -a xxx --proc-type=auto -l 0-1 -- -i --rxq=4 --txq=4 --num-procs=2 --proc-id=0 + + secondary process: + sudo ./dpdk-testpmd -a xxx --proc-type=auto -l 2-3 -- -i --rxq=4 --txq=4 --num-procs=2 --proc-id=1 + +The command line options are: + +* ``-a, --allow`` + + Add a device to the allow list. ``xxx`` means device used which should be the same in primary process + and secondary process. + +* ``--proc-type`` + Specify a given process instance as the primary or secondary DPDK instance. ``auto`` set here is ok. + +* ``-l CORELIST`` + List of cores to run on. the corelist should be different in primary process and secondary process. + +* ``--rxq=N`` + + Set the number of RX queues per port to N, where 1 <= N <= 65535. + The default value is 1. N is the sum of queues used by primary and secondary process. + +* ``--txq=N`` + + Set the number of TX queues per port to N, where 1 <= N <= 65535. + The default value is 1. N is the sum of queues used by primary and secondary process. + +* ``--num-procs=N`` + + The number of processes which will be used. + +* ``--proc-id=id`` + + The id of the current process (id < num-procs). id should be different in primary process and secondary process. + +Calculation rule for queue: +All queues are allocated to different processes based on proc_num and proc_id. +Calculation rule for the Testpmd to allocate queues to each process: +start(queue start id) = proc_id * nb_q / num_procs； +end(queue end id) = start + nb_q / num_procs； + +For example, if supports 4 txq and rxq +the 0~1 for primary process +the 2~3 for secondary process + +Most dev ops is supported in primary and secondary process. While secondary process is not permitted +to allocate or release shared memory, so some ops are not supported as follows: +``dev_start`` +``dev_stop`` +``rx_queue_setup`` +``tx_queue_setup`` +``rx_queue_release`` +``tx_queue_release`` + +RTE_FLOW supported, it applies only on its own process on SW side, but all on HW size. +stats supported, stats will not change when one quit and start, As they share the same buffer to store the stats. +RSS supported, Primary process and secondary process has separate queues to use, RSS will work in their own queues whether primary and secondary process. -- 2.7.4