From: "Min Hu (Connor)" <humin29@huawei.com>
To: <dev@dpdk.org>
Cc: <ferruh.yigit@intel.com>
Subject: [dpdk-dev] [PATCH] examples/ethtool: fix pause configuration
Date: Wed, 28 Apr 2021 16:42:59 +0800 [thread overview]
Message-ID: <1619599379-470-1-git-send-email-humin29@huawei.com> (raw)
From: Huisong Li <lihuisong@huawei.com>
Currently, the pause command in ethtool to enable Rx/Tx pause has the
following problem. Namely, Assume that the device supports flow control
auto-negotiation to set pause parameters, which will the device that does
not support flow control auto-negotiation fails to run this command.
This patch supports the configuration of flow control auto-negotiation
and fixes the print format and style of the pause cmd to make it more
readable.
Fixes: bda68ab9d1e7 ("examples/ethtool: add user-space ethtool sample application")
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
---
examples/ethtool/ethtool-app/ethapp.c | 59 +++++++++++++++++++++--------------
1 file changed, 36 insertions(+), 23 deletions(-)
diff --git a/examples/ethtool/ethtool-app/ethapp.c b/examples/ethtool/ethtool-app/ethapp.c
index 36a1c37..057fa97 100644
--- a/examples/ethtool/ethtool-app/ethapp.c
+++ b/examples/ethtool/ethtool-app/ethapp.c
@@ -49,6 +49,13 @@ struct pcmd_intintint_params {
uint16_t rx;
};
+struct pcmd_pause_params {
+ cmdline_fixed_string_t cmd;
+ uint16_t port;
+ cmdline_fixed_string_t mode;
+ cmdline_fixed_string_t autoneg;
+ cmdline_fixed_string_t an_status;
+};
/* Parameter-less commands */
cmdline_parse_token_string_t pcmd_quit_token_cmd =
@@ -116,12 +123,18 @@ cmdline_parse_token_num_t pcmd_intintint_token_rx =
/* Pause commands */
cmdline_parse_token_string_t pcmd_pause_token_cmd =
- TOKEN_STRING_INITIALIZER(struct pcmd_intstr_params, cmd, "pause");
+ TOKEN_STRING_INITIALIZER(struct pcmd_pause_params, cmd, "pause");
cmdline_parse_token_num_t pcmd_pause_token_port =
- TOKEN_NUM_INITIALIZER(struct pcmd_intstr_params, port, RTE_UINT16);
-cmdline_parse_token_string_t pcmd_pause_token_opt =
- TOKEN_STRING_INITIALIZER(struct pcmd_intstr_params,
- opt, "all#tx#rx#none");
+ TOKEN_NUM_INITIALIZER(struct pcmd_pause_params, port, RTE_UINT16);
+cmdline_parse_token_string_t pcmd_pause_token_mode =
+ TOKEN_STRING_INITIALIZER(struct pcmd_pause_params,
+ mode, "full#tx#rx#none");
+cmdline_parse_token_string_t pcmd_pause_token_autoneg =
+ TOKEN_STRING_INITIALIZER(struct pcmd_pause_params,
+ autoneg, "autoneg");
+cmdline_parse_token_string_t pcmd_pause_token_an_status =
+ TOKEN_STRING_INITIALIZER(struct pcmd_pause_params,
+ an_status, "on#off");
/* VLAN commands */
cmdline_parse_token_string_t pcmd_vlan_token_cmd =
@@ -348,13 +361,12 @@ pcmd_module_eeprom_callback(void *ptr_params,
fclose(fp_eeprom);
}
-
static void
pcmd_pause_callback(void *ptr_params,
__rte_unused struct cmdline *ctx,
void *ptr_data)
{
- struct pcmd_intstr_params *params = ptr_params;
+ struct pcmd_pause_params *params = ptr_params;
struct ethtool_pauseparam info;
int stat;
@@ -366,39 +378,38 @@ pcmd_pause_callback(void *ptr_params,
stat = rte_ethtool_get_pauseparam(params->port, &info);
} else {
memset(&info, 0, sizeof(info));
- if (strcasecmp("all", params->opt) == 0) {
+ if (strcasecmp("full", params->mode) == 0) {
info.tx_pause = 1;
info.rx_pause = 1;
- } else if (strcasecmp("tx", params->opt) == 0) {
+ } else if (strcasecmp("tx", params->mode) == 0) {
info.tx_pause = 1;
info.rx_pause = 0;
- } else if (strcasecmp("rx", params->opt) == 0) {
+ } else if (strcasecmp("rx", params->mode) == 0) {
info.tx_pause = 0;
info.rx_pause = 1;
} else {
info.tx_pause = 0;
info.rx_pause = 0;
}
- /* Assume auto-negotiation wanted */
- info.autoneg = 1;
+
+ if (strcasecmp("on", params->an_status) == 0)
+ info.autoneg = 1;
+ else
+ info.autoneg = 0;
+
stat = rte_ethtool_set_pauseparam(params->port, &info);
}
if (stat == 0) {
- if (info.rx_pause && info.tx_pause)
- printf("Port %i: Tx & Rx Paused\n", params->port);
- else if (info.rx_pause)
- printf("Port %i: Rx Paused\n", params->port);
- else if (info.tx_pause)
- printf("Port %i: Tx Paused\n", params->port);
- else
- printf("Port %i: Tx & Rx not paused\n", params->port);
+ printf("Pause parameters for Port %i:\n", params->port);
+ printf("Rx pause: %s\n", info.rx_pause ? "on" : "off");
+ printf("Tx pause: %s\n", info.tx_pause ? "on" : "off");
+ printf("Autoneg: %s\n", info.autoneg ? "on" : "off");
} else if (stat == -ENOTSUP)
printf("Port %i: Operation not supported\n", params->port);
else
printf("Port %i: Error %i\n", params->port, stat);
}
-
static void
pcmd_open_callback(__rte_unused void *ptr_params,
__rte_unused struct cmdline *ctx,
@@ -741,11 +752,13 @@ cmdline_parse_inst_t pcmd_pause = {
.f = pcmd_pause_callback,
.data = NULL,
.help_str =
- "pause <port_id> <all|tx|rx|none>\n Pause/unpause port",
+ "pause <port_id> <full|tx|rx|none> autoneg <on|off>\n Pause/unpause port",
.tokens = {
(void *)&pcmd_pause_token_cmd,
(void *)&pcmd_pause_token_port,
- (void *)&pcmd_pause_token_opt,
+ (void *)&pcmd_pause_token_mode,
+ (void *)&pcmd_pause_token_autoneg,
+ (void *)&pcmd_pause_token_an_status,
NULL
},
};
--
2.7.4
next reply other threads:[~2021-04-28 8:42 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-28 8:42 Min Hu (Connor) [this message]
2021-06-28 2:17 ` Min Hu (Connor)
2021-07-17 2:15 ` Min Hu (Connor)
2021-09-28 1:20 ` Min Hu (Connor)
2023-07-03 23:19 ` Stephen Hemminger
2023-11-10 3:30 ` [PATCH v2] " Huisong Li
2023-11-22 22:50 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1619599379-470-1-git-send-email-humin29@huawei.com \
--to=humin29@huawei.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).