From: "Min Hu (Connor)" <humin29@huawei.com>
To: <dev@dpdk.org>
Cc: <ferruh.yigit@intel.com>
Subject: [dpdk-dev] [PATCH 2/6] net/hns3: fix requested FC mode roolback
Date: Sat, 15 May 2021 08:52:34 +0800 [thread overview]
Message-ID: <1621039958-34847-3-git-send-email-humin29@huawei.com> (raw)
In-Reply-To: <1621039958-34847-1-git-send-email-humin29@huawei.com>
From: Huisong Li <lihuisong@huawei.com>
Currently, the "requested_fc_mode" lacks rollback when enabling link
FC or PFC fails. For example, it encounters a reset. This may result
in incorrect FC mode after a reset.
Fixes: d4fdb71a0e7b ("net/hns3: fix flow control mode")
Fixes: 62e3ccc2b94c ("net/hns3: support flow control")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
---
drivers/net/hns3/hns3_dcb.c | 30 ++++++++++++++++++++++++++++++
drivers/net/hns3/hns3_ethdev.c | 28 ----------------------------
2 files changed, 30 insertions(+), 28 deletions(-)
diff --git a/drivers/net/hns3/hns3_dcb.c b/drivers/net/hns3/hns3_dcb.c
index ab307f1..bea4115 100644
--- a/drivers/net/hns3/hns3_dcb.c
+++ b/drivers/net/hns3/hns3_dcb.c
@@ -1760,6 +1760,30 @@ hns3_dcb_cfg_update(struct hns3_adapter *hns)
return ret;
}
+static void
+hns3_get_fc_mode(struct hns3_hw *hw, enum rte_eth_fc_mode mode)
+{
+ switch (mode) {
+ case RTE_FC_NONE:
+ hw->requested_fc_mode = HNS3_FC_NONE;
+ break;
+ case RTE_FC_RX_PAUSE:
+ hw->requested_fc_mode = HNS3_FC_RX_PAUSE;
+ break;
+ case RTE_FC_TX_PAUSE:
+ hw->requested_fc_mode = HNS3_FC_TX_PAUSE;
+ break;
+ case RTE_FC_FULL:
+ hw->requested_fc_mode = HNS3_FC_FULL;
+ break;
+ default:
+ hw->requested_fc_mode = HNS3_FC_NONE;
+ hns3_warn(hw, "fc_mode(%u) exceeds member scope and is "
+ "configured to RTE_FC_NONE", mode);
+ break;
+ }
+}
+
/*
* hns3_dcb_pfc_enable - Enable priority flow control
* @dev: pointer to ethernet device
@@ -1772,6 +1796,7 @@ hns3_dcb_pfc_enable(struct rte_eth_dev *dev, struct rte_eth_pfc_conf *pfc_conf)
struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct hns3_pf *pf = HNS3_DEV_PRIVATE_TO_PF(dev->data->dev_private);
enum hns3_fc_status fc_status = hw->current_fc_status;
+ enum hns3_fc_mode old_fc_mode = hw->requested_fc_mode;
uint8_t hw_pfc_map = hw->dcb_info.hw_pfc_map;
uint8_t pfc_en = hw->dcb_info.pfc_en;
uint8_t priority = pfc_conf->priority;
@@ -1779,6 +1804,7 @@ hns3_dcb_pfc_enable(struct rte_eth_dev *dev, struct rte_eth_pfc_conf *pfc_conf)
int ret, status;
pf->pause_time = pfc_conf->fc.pause_time;
+ hns3_get_fc_mode(hw, pfc_conf->fc.mode);
hw->current_fc_status = HNS3_FC_STATUS_PFC;
hw->dcb_info.pfc_en |= BIT(priority);
hw->dcb_info.hw_pfc_map =
@@ -1800,6 +1826,7 @@ hns3_dcb_pfc_enable(struct rte_eth_dev *dev, struct rte_eth_pfc_conf *pfc_conf)
return 0;
pfc_setup_fail:
+ hw->requested_fc_mode = old_fc_mode;
hw->current_fc_status = fc_status;
pf->pause_time = pause_time;
hw->dcb_info.pfc_en = pfc_en;
@@ -1822,11 +1849,13 @@ hns3_fc_enable(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
{
struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct hns3_pf *pf = HNS3_DEV_PRIVATE_TO_PF(dev->data->dev_private);
+ enum hns3_fc_mode old_fc_mode = hw->requested_fc_mode;
enum hns3_fc_status fc_status = hw->current_fc_status;
uint16_t pause_time = pf->pause_time;
int ret;
pf->pause_time = fc_conf->pause_time;
+ hns3_get_fc_mode(hw, fc_conf->mode);
/*
* In fact, current_fc_status is HNS3_FC_STATUS_NONE when mode
@@ -1846,6 +1875,7 @@ hns3_fc_enable(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
return 0;
setup_fc_fail:
+ hw->requested_fc_mode = old_fc_mode;
hw->current_fc_status = fc_status;
pf->pause_time = pause_time;
diff --git a/drivers/net/hns3/hns3_ethdev.c b/drivers/net/hns3/hns3_ethdev.c
index 0589e3f..f49f220 100644
--- a/drivers/net/hns3/hns3_ethdev.c
+++ b/drivers/net/hns3/hns3_ethdev.c
@@ -6059,30 +6059,6 @@ hns3_flow_ctrl_get(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
return 0;
}
-static void
-hns3_get_fc_mode(struct hns3_hw *hw, enum rte_eth_fc_mode mode)
-{
- switch (mode) {
- case RTE_FC_NONE:
- hw->requested_fc_mode = HNS3_FC_NONE;
- break;
- case RTE_FC_RX_PAUSE:
- hw->requested_fc_mode = HNS3_FC_RX_PAUSE;
- break;
- case RTE_FC_TX_PAUSE:
- hw->requested_fc_mode = HNS3_FC_TX_PAUSE;
- break;
- case RTE_FC_FULL:
- hw->requested_fc_mode = HNS3_FC_FULL;
- break;
- default:
- hw->requested_fc_mode = HNS3_FC_NONE;
- hns3_warn(hw, "fc_mode(%u) exceeds member scope and is "
- "configured to RTE_FC_NONE", mode);
- break;
- }
-}
-
static int
hns3_check_fc_autoneg_valid(struct hns3_hw *hw, uint8_t autoneg)
{
@@ -6156,8 +6132,6 @@ hns3_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
return -EOPNOTSUPP;
}
- hns3_get_fc_mode(hw, fc_conf->mode);
-
rte_spinlock_lock(&hw->lock);
ret = hns3_fc_enable(dev, fc_conf);
rte_spinlock_unlock(&hw->lock);
@@ -6204,8 +6178,6 @@ hns3_priority_flow_ctrl_set(struct rte_eth_dev *dev,
return -EOPNOTSUPP;
}
- hns3_get_fc_mode(hw, pfc_conf->fc.mode);
-
rte_spinlock_lock(&hw->lock);
ret = hns3_dcb_pfc_enable(dev, pfc_conf);
rte_spinlock_unlock(&hw->lock);
--
2.7.4
next prev parent reply other threads:[~2021-05-15 0:53 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-15 0:52 [dpdk-dev] [PATCH 0/6] bugfix for hns3 PMD Min Hu (Connor)
2021-05-15 0:52 ` [dpdk-dev] [PATCH 1/6] net/hns3: fix check of Rx/Tx queue numbers Min Hu (Connor)
2021-05-15 0:52 ` Min Hu (Connor) [this message]
2021-05-15 0:52 ` [dpdk-dev] [PATCH 3/6] net/hns3: remove meaningless packet buffer rollback Min Hu (Connor)
2021-05-15 0:52 ` [dpdk-dev] [PATCH 4/6] net/hns3: fix DCB configuration Min Hu (Connor)
2021-05-15 0:52 ` [dpdk-dev] [PATCH 5/6] net/hns3: fix DCB cannot be reconfigured Min Hu (Connor)
2021-05-15 0:52 ` [dpdk-dev] [PATCH 6/6] net/hns3: fix link speed when VF device is down Min Hu (Connor)
2021-05-18 10:41 ` [dpdk-dev] [PATCH 0/6] bugfix for hns3 PMD Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1621039958-34847-3-git-send-email-humin29@huawei.com \
--to=humin29@huawei.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).