From: Anoob Joseph <anoobj@marvell.com>
To: Akhil Goyal <gakhil@marvell.com>, Thomas Monjalon <thomas@monjalon.net>
Cc: Tejasree Kondoj <ktejasree@marvell.com>,
Jerin Jacob <jerinj@marvell.com>,
Ankur Dwivedi <adwivedi@marvell.com>, <dev@dpdk.org>,
Anoob Joseph <anoobj@marvell.com>,
Archana Muniganti <marchana@marvell.com>
Subject: [dpdk-dev] [PATCH 19/20] crypto/cnxk: add digest support
Date: Wed, 2 Jun 2021 22:13:40 +0530 [thread overview]
Message-ID: <1622652221-22732-20-git-send-email-anoobj@marvell.com> (raw)
In-Reply-To: <1622652221-22732-1-git-send-email-anoobj@marvell.com>
From: Tejasree Kondoj <ktejasree@marvell.com>
Add support for digest support for various algorithms.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
---
doc/guides/cryptodevs/features/cn10k.ini | 17 ++
doc/guides/cryptodevs/features/cn9k.ini | 17 ++
drivers/crypto/cnxk/cn10k_cryptodev_ops.c | 18 +-
drivers/crypto/cnxk/cn9k_cryptodev_ops.c | 17 +-
drivers/crypto/cnxk/cnxk_se.h | 342 ++++++++++++++++++++++++++++++
5 files changed, 409 insertions(+), 2 deletions(-)
diff --git a/doc/guides/cryptodevs/features/cn10k.ini b/doc/guides/cryptodevs/features/cn10k.ini
index 23ec100..41e936b 100644
--- a/doc/guides/cryptodevs/features/cn10k.ini
+++ b/doc/guides/cryptodevs/features/cn10k.ini
@@ -38,6 +38,23 @@ ZUC EEA3 = Y
; Supported authentication algorithms of 'cn10k' crypto driver.
;
[Auth]
+NULL = Y
+AES GMAC = Y
+KASUMI F9 = Y
+MD5 = Y
+MD5 HMAC = Y
+SHA1 = Y
+SHA1 HMAC = Y
+SHA224 = Y
+SHA224 HMAC = Y
+SHA256 = Y
+SHA256 HMAC = Y
+SHA384 = Y
+SHA384 HMAC = Y
+SHA512 = Y
+SHA512 HMAC = Y
+SNOW3G UIA2 = Y
+ZUC EIA3 = Y
;
; Supported AEAD algorithms of 'cn10k' crypto driver.
diff --git a/doc/guides/cryptodevs/features/cn9k.ini b/doc/guides/cryptodevs/features/cn9k.ini
index e833dc0..7b310e6 100644
--- a/doc/guides/cryptodevs/features/cn9k.ini
+++ b/doc/guides/cryptodevs/features/cn9k.ini
@@ -38,6 +38,23 @@ ZUC EEA3 = Y
; Supported authentication algorithms of 'cn9k' crypto driver.
;
[Auth]
+NULL = Y
+AES GMAC = Y
+KASUMI F9 = Y
+MD5 = Y
+MD5 HMAC = Y
+SHA1 = Y
+SHA1 HMAC = Y
+SHA224 = Y
+SHA224 HMAC = Y
+SHA256 = Y
+SHA256 HMAC = Y
+SHA384 = Y
+SHA384 HMAC = Y
+SHA512 = Y
+SHA512 HMAC = Y
+SNOW3G UIA2 = Y
+ZUC EIA3 = Y
;
; Supported AEAD algorithms of 'cn9k' crypto driver.
diff --git a/drivers/crypto/cnxk/cn10k_cryptodev_ops.c b/drivers/crypto/cnxk/cn10k_cryptodev_ops.c
index b0faebc..22704df 100644
--- a/drivers/crypto/cnxk/cn10k_cryptodev_ops.c
+++ b/drivers/crypto/cnxk/cn10k_cryptodev_ops.c
@@ -53,6 +53,9 @@ cpt_sym_inst_fill(struct cnxk_cpt_qp *qp, struct rte_crypto_op *op,
if (cpt_op & ROC_SE_OP_CIPHER_MASK)
ret = fill_fc_params(op, sess, &qp->meta_info, infl_req, inst);
+ else
+ ret = fill_digest_params(op, sess, &qp->meta_info, infl_req,
+ inst);
return ret;
}
@@ -203,7 +206,10 @@ cn10k_cpt_dequeue_post_process(struct cnxk_cpt_qp *qp,
if (likely(res->compcode == CPT_COMP_GOOD ||
res->compcode == CPT_COMP_WARN)) {
if (unlikely(res->uc_compcode)) {
- cop->status = RTE_CRYPTO_OP_STATUS_ERROR;
+ if (res->uc_compcode == ROC_SE_ERR_GC_ICV_MISCOMPARE)
+ cop->status = RTE_CRYPTO_OP_STATUS_AUTH_FAILED;
+ else
+ cop->status = RTE_CRYPTO_OP_STATUS_ERROR;
CPT_LOG_DP_DEBUG("Request failed with microcode error");
CPT_LOG_DP_DEBUG("MC completion code 0x%x",
@@ -212,6 +218,16 @@ cn10k_cpt_dequeue_post_process(struct cnxk_cpt_qp *qp,
}
cop->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
+ if (cop->type == RTE_CRYPTO_OP_TYPE_SYMMETRIC) {
+
+ /* Verify authentication data if required */
+ if (unlikely(infl_req->op_flags &
+ CPT_OP_FLAGS_AUTH_VERIFY)) {
+ uintptr_t *rsp = infl_req->mdata;
+ compl_auth_verify(cop, (uint8_t *)rsp[0],
+ rsp[1]);
+ }
+ }
} else {
cop->status = RTE_CRYPTO_OP_STATUS_ERROR;
CPT_LOG_DP_DEBUG("HW completion code 0x%x", res->compcode);
diff --git a/drivers/crypto/cnxk/cn9k_cryptodev_ops.c b/drivers/crypto/cnxk/cn9k_cryptodev_ops.c
index fed67c9..23b596f 100644
--- a/drivers/crypto/cnxk/cn9k_cryptodev_ops.c
+++ b/drivers/crypto/cnxk/cn9k_cryptodev_ops.c
@@ -24,6 +24,9 @@ cn9k_cpt_sym_inst_fill(struct cnxk_cpt_qp *qp, struct rte_crypto_op *op,
if (cpt_op & ROC_SE_OP_CIPHER_MASK)
ret = fill_fc_params(op, sess, &qp->meta_info, infl_req, inst);
+ else
+ ret = fill_digest_params(op, sess, &qp->meta_info, infl_req,
+ inst);
return ret;
}
@@ -166,7 +169,10 @@ cn9k_cpt_dequeue_post_process(struct cnxk_cpt_qp *qp, struct rte_crypto_op *cop,
if (likely(res->compcode == CPT_COMP_GOOD)) {
if (unlikely(res->uc_compcode)) {
- cop->status = RTE_CRYPTO_OP_STATUS_ERROR;
+ if (res->uc_compcode == ROC_SE_ERR_GC_ICV_MISCOMPARE)
+ cop->status = RTE_CRYPTO_OP_STATUS_AUTH_FAILED;
+ else
+ cop->status = RTE_CRYPTO_OP_STATUS_ERROR;
CPT_LOG_DP_DEBUG("Request failed with microcode error");
CPT_LOG_DP_DEBUG("MC completion code 0x%x",
@@ -175,6 +181,15 @@ cn9k_cpt_dequeue_post_process(struct cnxk_cpt_qp *qp, struct rte_crypto_op *cop,
}
cop->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
+ if (cop->type == RTE_CRYPTO_OP_TYPE_SYMMETRIC) {
+ /* Verify authentication data if required */
+ if (unlikely(infl_req->op_flags &
+ CPT_OP_FLAGS_AUTH_VERIFY)) {
+ uintptr_t *rsp = infl_req->mdata;
+ compl_auth_verify(cop, (uint8_t *)rsp[0],
+ rsp[1]);
+ }
+ }
} else {
cop->status = RTE_CRYPTO_OP_STATUS_ERROR;
CPT_LOG_DP_DEBUG("HW completion code 0x%x", res->compcode);
diff --git a/drivers/crypto/cnxk/cnxk_se.h b/drivers/crypto/cnxk/cnxk_se.h
index 1bdd028..fc1e488 100644
--- a/drivers/crypto/cnxk/cnxk_se.h
+++ b/drivers/crypto/cnxk/cnxk_se.h
@@ -486,6 +486,139 @@ fill_sg_comp_from_iov(struct roc_se_sglist_comp *list, uint32_t i,
}
static __rte_always_inline int
+cpt_digest_gen_prep(uint32_t flags, uint64_t d_lens,
+ struct roc_se_fc_params *params, struct cpt_inst_s *inst)
+{
+ void *m_vaddr = params->meta_buf.vaddr;
+ uint32_t size, i;
+ uint16_t data_len, mac_len, key_len;
+ roc_se_auth_type hash_type;
+ struct roc_se_ctx *ctx;
+ struct roc_se_sglist_comp *gather_comp;
+ struct roc_se_sglist_comp *scatter_comp;
+ uint8_t *in_buffer;
+ uint32_t g_size_bytes, s_size_bytes;
+ union cpt_inst_w4 cpt_inst_w4;
+
+ ctx = params->ctx_buf.vaddr;
+
+ hash_type = ctx->hash_type;
+ mac_len = ctx->mac_len;
+ key_len = ctx->auth_key_len;
+ data_len = ROC_SE_AUTH_DLEN(d_lens);
+
+ /*GP op header */
+ cpt_inst_w4.s.opcode_minor = 0;
+ cpt_inst_w4.s.param2 = ((uint16_t)hash_type << 8);
+ if (ctx->hmac) {
+ cpt_inst_w4.s.opcode_major =
+ ROC_SE_MAJOR_OP_HMAC | ROC_SE_DMA_MODE;
+ cpt_inst_w4.s.param1 = key_len;
+ cpt_inst_w4.s.dlen = data_len + RTE_ALIGN_CEIL(key_len, 8);
+ } else {
+ cpt_inst_w4.s.opcode_major =
+ ROC_SE_MAJOR_OP_HASH | ROC_SE_DMA_MODE;
+ cpt_inst_w4.s.param1 = 0;
+ cpt_inst_w4.s.dlen = data_len;
+ }
+
+ /* Null auth only case enters the if */
+ if (unlikely(!hash_type && !ctx->enc_cipher)) {
+ cpt_inst_w4.s.opcode_major = ROC_SE_MAJOR_OP_MISC;
+ /* Minor op is passthrough */
+ cpt_inst_w4.s.opcode_minor = 0x03;
+ /* Send out completion code only */
+ cpt_inst_w4.s.param2 = 0x1;
+ }
+
+ /* DPTR has SG list */
+ in_buffer = m_vaddr;
+
+ ((uint16_t *)in_buffer)[0] = 0;
+ ((uint16_t *)in_buffer)[1] = 0;
+
+ /* TODO Add error check if space will be sufficient */
+ gather_comp = (struct roc_se_sglist_comp *)((uint8_t *)m_vaddr + 8);
+
+ /*
+ * Input gather list
+ */
+
+ i = 0;
+
+ if (ctx->hmac) {
+ uint64_t k_vaddr = (uint64_t)params->ctx_buf.vaddr +
+ offsetof(struct roc_se_ctx, auth_key);
+ /* Key */
+ i = fill_sg_comp(gather_comp, i, k_vaddr,
+ RTE_ALIGN_CEIL(key_len, 8));
+ }
+
+ /* input data */
+ size = data_len;
+ if (size) {
+ i = fill_sg_comp_from_iov(gather_comp, i, params->src_iov, 0,
+ &size, NULL, 0);
+ if (unlikely(size)) {
+ CPT_LOG_DP_DEBUG("Insufficient dst IOV size, short"
+ " by %dB",
+ size);
+ return -1;
+ }
+ } else {
+ /*
+ * Looks like we need to support zero data
+ * gather ptr in case of hash & hmac
+ */
+ i++;
+ }
+ ((uint16_t *)in_buffer)[2] = rte_cpu_to_be_16(i);
+ g_size_bytes = ((i + 3) / 4) * sizeof(struct roc_se_sglist_comp);
+
+ /*
+ * Output Gather list
+ */
+
+ i = 0;
+ scatter_comp = (struct roc_se_sglist_comp *)((uint8_t *)gather_comp +
+ g_size_bytes);
+
+ if (flags & ROC_SE_VALID_MAC_BUF) {
+ if (unlikely(params->mac_buf.size < mac_len)) {
+ CPT_LOG_DP_ERR("Insufficient MAC size");
+ return -1;
+ }
+
+ size = mac_len;
+ i = fill_sg_comp_from_buf_min(scatter_comp, i, ¶ms->mac_buf,
+ &size);
+ } else {
+ size = mac_len;
+ i = fill_sg_comp_from_iov(scatter_comp, i, params->src_iov,
+ data_len, &size, NULL, 0);
+ if (unlikely(size)) {
+ CPT_LOG_DP_ERR("Insufficient dst IOV size, short by"
+ " %dB",
+ size);
+ return -1;
+ }
+ }
+
+ ((uint16_t *)in_buffer)[3] = rte_cpu_to_be_16(i);
+ s_size_bytes = ((i + 3) / 4) * sizeof(struct roc_se_sglist_comp);
+
+ size = g_size_bytes + s_size_bytes + ROC_SE_SG_LIST_HDR_SIZE;
+
+ /* This is DPTR len in case of SG mode */
+ cpt_inst_w4.s.dlen = size;
+
+ inst->dptr = (uint64_t)in_buffer;
+ inst->w4.u64 = cpt_inst_w4.u64;
+
+ return 0;
+}
+
+static __rte_always_inline int
cpt_enc_hmac_prep(uint32_t flags, uint64_t d_offs, uint64_t d_lens,
struct roc_se_fc_params *fc_params, struct cpt_inst_s *inst)
{
@@ -1907,6 +2040,13 @@ cpt_fc_dec_hmac_prep(uint32_t flags, uint64_t d_offs, uint64_t d_lens,
} else if (fc_type == ROC_SE_KASUMI) {
ret = cpt_kasumi_dec_prep(d_offs, d_lens, fc_params, inst);
}
+
+ /*
+ * For AUTH_ONLY case,
+ * MC only supports digest generation and verification
+ * should be done in software by memcmp()
+ */
+
return ret;
}
@@ -1929,6 +2069,8 @@ cpt_fc_enc_hmac_prep(uint32_t flags, uint64_t d_offs, uint64_t d_lens,
} else if (fc_type == ROC_SE_KASUMI) {
ret = cpt_kasumi_enc_prep(flags, d_offs, d_lens, fc_params,
inst);
+ } else if (fc_type == ROC_SE_HASH_HMAC) {
+ ret = cpt_digest_gen_prep(flags, d_lens, fc_params, inst);
}
return ret;
@@ -2707,4 +2849,204 @@ fill_fc_params(struct rte_crypto_op *cop, struct cnxk_se_sess *sess,
return ret;
}
+static __rte_always_inline void
+compl_auth_verify(struct rte_crypto_op *op, uint8_t *gen_mac, uint64_t mac_len)
+{
+ uint8_t *mac;
+ struct rte_crypto_sym_op *sym_op = op->sym;
+
+ if (sym_op->auth.digest.data)
+ mac = sym_op->auth.digest.data;
+ else
+ mac = rte_pktmbuf_mtod_offset(sym_op->m_src, uint8_t *,
+ sym_op->auth.data.length +
+ sym_op->auth.data.offset);
+ if (!mac) {
+ op->status = RTE_CRYPTO_OP_STATUS_ERROR;
+ return;
+ }
+
+ if (memcmp(mac, gen_mac, mac_len))
+ op->status = RTE_CRYPTO_OP_STATUS_AUTH_FAILED;
+ else
+ op->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
+}
+
+static __rte_always_inline void
+find_kasumif9_direction_and_length(uint8_t *src, uint32_t counter_num_bytes,
+ uint32_t *addr_length_in_bits,
+ uint8_t *addr_direction)
+{
+ uint8_t found = 0;
+ uint32_t pos;
+ uint8_t last_byte;
+ while (!found && counter_num_bytes > 0) {
+ counter_num_bytes--;
+ if (src[counter_num_bytes] == 0x00)
+ continue;
+ pos = rte_bsf32(src[counter_num_bytes]);
+ if (pos == 7) {
+ if (likely(counter_num_bytes > 0)) {
+ last_byte = src[counter_num_bytes - 1];
+ *addr_direction = last_byte & 0x1;
+ *addr_length_in_bits =
+ counter_num_bytes * 8 - 1;
+ }
+ } else {
+ last_byte = src[counter_num_bytes];
+ *addr_direction = (last_byte >> (pos + 1)) & 0x1;
+ *addr_length_in_bits =
+ counter_num_bytes * 8 + (8 - (pos + 2));
+ }
+ found = 1;
+ }
+}
+
+/*
+ * This handles all auth only except AES_GMAC
+ */
+static __rte_always_inline int
+fill_digest_params(struct rte_crypto_op *cop, struct cnxk_se_sess *sess,
+ struct cpt_qp_meta_info *m_info,
+ struct cpt_inflight_req *infl_req, struct cpt_inst_s *inst)
+{
+ uint32_t space = 0;
+ struct rte_crypto_sym_op *sym_op = cop->sym;
+ void *mdata;
+ uint32_t auth_range_off;
+ uint32_t flags = 0;
+ uint64_t d_offs = 0, d_lens;
+ struct rte_mbuf *m_src, *m_dst;
+ uint16_t auth_op = sess->cpt_op & ROC_SE_OP_AUTH_MASK;
+ uint16_t mac_len = sess->mac_len;
+ struct roc_se_fc_params params;
+ char src[SRC_IOV_SIZE];
+ uint8_t iv_buf[16];
+ int ret;
+
+ memset(¶ms, 0, sizeof(struct roc_se_fc_params));
+
+ m_src = sym_op->m_src;
+
+ mdata = alloc_op_meta(¶ms.meta_buf, m_info->mlen, m_info->pool,
+ infl_req);
+ if (mdata == NULL) {
+ ret = -ENOMEM;
+ goto err_exit;
+ }
+
+ auth_range_off = sym_op->auth.data.offset;
+
+ flags = ROC_SE_VALID_MAC_BUF;
+ params.src_iov = (void *)src;
+ if (unlikely(sess->zsk_flag)) {
+ /*
+ * Since for Zuc, Kasumi, Snow3g offsets are in bits
+ * we will send pass through even for auth only case,
+ * let MC handle it
+ */
+ d_offs = auth_range_off;
+ auth_range_off = 0;
+ params.auth_iv_buf = rte_crypto_op_ctod_offset(
+ cop, uint8_t *, sess->auth_iv_offset);
+ if (sess->zsk_flag == ROC_SE_K_F9) {
+ uint32_t length_in_bits, num_bytes;
+ uint8_t *src, direction = 0;
+
+ memcpy(iv_buf,
+ rte_pktmbuf_mtod(cop->sym->m_src, uint8_t *), 8);
+ /*
+ * This is kasumi f9, take direction from
+ * source buffer
+ */
+ length_in_bits = cop->sym->auth.data.length;
+ num_bytes = (length_in_bits >> 3);
+ src = rte_pktmbuf_mtod(cop->sym->m_src, uint8_t *);
+ find_kasumif9_direction_and_length(
+ src, num_bytes, &length_in_bits, &direction);
+ length_in_bits -= 64;
+ cop->sym->auth.data.offset += 64;
+ d_offs = cop->sym->auth.data.offset;
+ auth_range_off = d_offs / 8;
+ cop->sym->auth.data.length = length_in_bits;
+
+ /* Store it at end of auth iv */
+ iv_buf[8] = direction;
+ params.auth_iv_buf = iv_buf;
+ }
+ }
+
+ d_lens = sym_op->auth.data.length;
+
+ params.ctx_buf.vaddr = &sess->roc_se_ctx;
+
+ if (auth_op == ROC_SE_OP_AUTH_GENERATE) {
+ if (sym_op->auth.digest.data) {
+ /*
+ * Digest to be generated
+ * in separate buffer
+ */
+ params.mac_buf.size = sess->mac_len;
+ params.mac_buf.vaddr = sym_op->auth.digest.data;
+ } else {
+ uint32_t off = sym_op->auth.data.offset +
+ sym_op->auth.data.length;
+ int32_t dlen, space;
+
+ m_dst = sym_op->m_dst ? sym_op->m_dst : sym_op->m_src;
+ dlen = rte_pktmbuf_pkt_len(m_dst);
+
+ space = off + mac_len - dlen;
+ if (space > 0)
+ if (!rte_pktmbuf_append(m_dst, space)) {
+ CPT_LOG_DP_ERR("Failed to extend "
+ "mbuf by %uB",
+ space);
+ ret = -EINVAL;
+ goto free_mdata_and_exit;
+ }
+
+ params.mac_buf.vaddr =
+ rte_pktmbuf_mtod_offset(m_dst, void *, off);
+ params.mac_buf.size = mac_len;
+ }
+ } else {
+ uint64_t *op = mdata;
+
+ /* Need space for storing generated mac */
+ space += 2 * sizeof(uint64_t);
+
+ params.mac_buf.vaddr = (uint8_t *)mdata + space;
+ params.mac_buf.size = mac_len;
+ space += RTE_ALIGN_CEIL(mac_len, 8);
+ op[0] = (uintptr_t)params.mac_buf.vaddr;
+ op[1] = mac_len;
+ infl_req->op_flags |= CPT_OP_FLAGS_AUTH_VERIFY;
+ }
+
+ params.meta_buf.vaddr = (uint8_t *)mdata + space;
+ params.meta_buf.size -= space;
+
+ /* Out of place processing */
+ params.src_iov = (void *)src;
+
+ /*Store SG I/O in the api for reuse */
+ if (prepare_iov_from_pkt(m_src, params.src_iov, auth_range_off)) {
+ CPT_LOG_DP_ERR("Prepare src iov failed");
+ ret = -EINVAL;
+ goto free_mdata_and_exit;
+ }
+
+ ret = cpt_fc_enc_hmac_prep(flags, d_offs, d_lens, ¶ms, inst);
+ if (ret)
+ goto free_mdata_and_exit;
+
+ return 0;
+
+free_mdata_and_exit:
+ if (infl_req->op_flags & CPT_OP_FLAGS_METABUF)
+ rte_mempool_put(m_info->pool, infl_req->mdata);
+err_exit:
+ return ret;
+}
#endif /*_CNXK_SE_H_ */
--
2.7.4
next prev parent reply other threads:[~2021-06-02 16:46 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-02 16:43 [dpdk-dev] [PATCH 00/20] Add Marvell CNXK crypto PMDs Anoob Joseph
2021-06-02 16:43 ` [dpdk-dev] [PATCH 01/20] crypto/cnxk: add driver skeleton Anoob Joseph
2021-06-16 7:28 ` Akhil Goyal
2021-06-16 7:37 ` Anoob Joseph
2021-06-16 7:47 ` Akhil Goyal
2021-06-16 19:58 ` Akhil Goyal
2021-06-02 16:43 ` [dpdk-dev] [PATCH 02/20] crypto/cnxk: add probe and remove Anoob Joseph
2021-06-16 10:51 ` Akhil Goyal
2021-06-02 16:43 ` [dpdk-dev] [PATCH 03/20] crypto/cnxk: add device control ops Anoob Joseph
2021-06-02 16:43 ` [dpdk-dev] [PATCH 04/20] crypto/cnxk: add symmetric crypto capabilities Anoob Joseph
2021-06-16 9:47 ` Akhil Goyal
2021-06-02 16:43 ` [dpdk-dev] [PATCH 05/20] crypto/cnxk: add queue pair ops Anoob Joseph
2021-06-16 11:05 ` Akhil Goyal
2021-06-17 7:13 ` Anoob Joseph
2021-06-02 16:43 ` [dpdk-dev] [PATCH 06/20] crypto/cnxk: add session ops framework Anoob Joseph
2021-06-02 16:43 ` [dpdk-dev] [PATCH 07/20] crypto/cnxk: add enqueue burst op Anoob Joseph
2021-06-02 16:43 ` [dpdk-dev] [PATCH 08/20] crypto/cnxk: add dequeue " Anoob Joseph
2021-06-02 16:43 ` [dpdk-dev] [PATCH 09/20] crypto/cnxk: add cipher operation in session Anoob Joseph
2021-06-02 16:43 ` [dpdk-dev] [PATCH 10/20] crypto/cnxk: add auth " Anoob Joseph
2021-06-02 16:43 ` [dpdk-dev] [PATCH 11/20] crypto/cnxk: add aead " Anoob Joseph
2021-06-02 16:43 ` [dpdk-dev] [PATCH 12/20] crypto/cnxk: add chained " Anoob Joseph
2021-06-02 16:43 ` [dpdk-dev] [PATCH 13/20] crypto/cnxk: add flexi crypto cipher encrypt Anoob Joseph
2021-06-16 19:45 ` Akhil Goyal
2021-06-02 16:43 ` [dpdk-dev] [PATCH 14/20] crypto/cnxk: add flexi crypto cipher decrypt Anoob Joseph
2021-06-02 16:43 ` [dpdk-dev] [PATCH 15/20] crypto/cnxk: add ZUC and SNOW3G encrypt Anoob Joseph
2021-06-16 19:51 ` Akhil Goyal
2021-06-02 16:43 ` [dpdk-dev] [PATCH 16/20] crypto/cnxk: add ZUC and SNOW3G decrypt Anoob Joseph
2021-06-02 16:43 ` [dpdk-dev] [PATCH 17/20] crypto/cnxk: add KASUMI encrypt Anoob Joseph
2021-06-16 19:51 ` Akhil Goyal
2021-06-02 16:43 ` [dpdk-dev] [PATCH 18/20] crypto/cnxk: add KASUMI decrypt Anoob Joseph
2021-06-02 16:43 ` Anoob Joseph [this message]
2021-06-02 16:43 ` [dpdk-dev] [PATCH 20/20] test/crypto: enable cnxk crypto PMDs Anoob Joseph
2021-06-16 7:23 ` [dpdk-dev] [PATCH 00/20] Add Marvell CNXK " Akhil Goyal
2021-06-16 19:56 ` Akhil Goyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1622652221-22732-20-git-send-email-anoobj@marvell.com \
--to=anoobj@marvell.com \
--cc=adwivedi@marvell.com \
--cc=dev@dpdk.org \
--cc=gakhil@marvell.com \
--cc=jerinj@marvell.com \
--cc=ktejasree@marvell.com \
--cc=marchana@marvell.com \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).