From: Anoob Joseph <anoobj@marvell.com>
To: Akhil Goyal <gakhil@marvell.com>, Thomas Monjalon <thomas@monjalon.net>
Cc: Vidya Sagar Velumuri <vvelumuri@marvell.com>,
Jerin Jacob <jerinj@marvell.com>,
Ankur Dwivedi <adwivedi@marvell.com>,
Tejasree Kondoj <ktejasree@marvell.com>, <dev@dpdk.org>,
Anoob Joseph <anoobj@marvell.com>
Subject: [dpdk-dev] [PATCH v2 01/17] common/cnxk: add CPT HW defines
Date: Fri, 25 Jun 2021 11:06:33 +0530 [thread overview]
Message-ID: <1624599410-29689-2-git-send-email-anoobj@marvell.com> (raw)
In-Reply-To: <1624599410-29689-1-git-send-email-anoobj@marvell.com>
From: Vidya Sagar Velumuri <vvelumuri@marvell.com>
Add CPT hardware definitions. CPT is the hardware block on
cnxk family of processors, that can be used to offload
cryptographic operations.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Vidya Sagar Velumuri <vvelumuri@marvell.com>
---
drivers/common/cnxk/hw/cpt.h | 291 ++++++++++++++++++++++++++++++++++++++++++
drivers/common/cnxk/roc_api.h | 6 +
2 files changed, 297 insertions(+)
create mode 100644 drivers/common/cnxk/hw/cpt.h
diff --git a/drivers/common/cnxk/hw/cpt.h b/drivers/common/cnxk/hw/cpt.h
new file mode 100644
index 0000000..84ebf2d
--- /dev/null
+++ b/drivers/common/cnxk/hw/cpt.h
@@ -0,0 +1,291 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2021 Marvell.
+ */
+
+#ifndef __CPT_HW_H__
+#define __CPT_HW_H__
+
+/* Register offsets */
+
+#define CPT_COMP_NOT_DONE (0x0ull)
+#define CPT_COMP_GOOD (0x1ull)
+#define CPT_COMP_FAULT (0x2ull)
+#define CPT_COMP_SWERR (0x3ull)
+#define CPT_COMP_HWERR (0x4ull)
+#define CPT_COMP_INSTERR (0x5ull)
+#define CPT_COMP_WARN (0x6ull) /* [CN10K, .) */
+
+#define CPT_LF_INT_VEC_MISC (0x0ull)
+#define CPT_LF_INT_VEC_DONE (0x1ull)
+#define CPT_LF_CTL (0x10ull)
+#define CPT_LF_DONE_WAIT (0x30ull)
+#define CPT_LF_INPROG (0x40ull)
+#define CPT_LF_DONE (0x50ull)
+#define CPT_LF_DONE_ACK (0x60ull)
+#define CPT_LF_DONE_INT_ENA_W1S (0x90ull)
+#define CPT_LF_DONE_INT_ENA_W1C (0xa0ull)
+#define CPT_LF_MISC_INT (0xb0ull)
+#define CPT_LF_MISC_INT_W1S (0xc0ull)
+#define CPT_LF_MISC_INT_ENA_W1S (0xd0ull)
+#define CPT_LF_MISC_INT_ENA_W1C (0xe0ull)
+#define CPT_LF_Q_BASE (0xf0ull)
+#define CPT_LF_Q_SIZE (0x100ull)
+#define CPT_LF_Q_INST_PTR (0x110ull)
+#define CPT_LF_Q_GRP_PTR (0x120ull)
+#define CPT_LF_NQX(a) (0x400ull | (uint64_t)(a) << 3)
+#define CPT_LF_CTX_CTL (0x500ull)
+#define CPT_LF_CTX_FLUSH (0x510ull)
+#define CPT_LF_CTX_ERR (0x520ull)
+#define CPT_LF_CTX_ENC_BYTE_CNT (0x530ull)
+#define CPT_LF_CTX_ENC_PKT_CNT (0x540ull)
+#define CPT_LF_CTX_DEC_BYTE_CNT (0x550ull)
+#define CPT_LF_CTX_DEC_PKT_CNT (0x560ull)
+
+#define CPT_AF_LFX_CTL(a) (0x27000ull | (uint64_t)(a) << 3)
+#define CPT_AF_LFX_CTL2(a) (0x29000ull | (uint64_t)(a) << 3)
+
+/* Structures definitions */
+
+union cpt_lf_ctl {
+ uint64_t u;
+ struct cpt_lf_ctl_s {
+ uint64_t ena : 1;
+ uint64_t fc_ena : 1;
+ uint64_t fc_up_crossing : 1;
+ uint64_t reserved_3_3 : 1;
+ uint64_t fc_hyst_bits : 4;
+ uint64_t reserved_8_63 : 56;
+ } s;
+};
+
+union cpt_lf_ctx_flush {
+ uint64_t u;
+ struct {
+ uint64_t cptr : 46;
+ uint64_t inval : 1;
+ uint64_t res : 1;
+ uint64_t pf_func : 16;
+ } s;
+};
+
+union cpt_lf_inprog {
+ uint64_t u;
+ struct cpt_lf_inprog_s {
+ uint64_t inflight : 9;
+ uint64_t reserved_9_15 : 7;
+ uint64_t eena : 1;
+ uint64_t grp_drp : 1;
+ uint64_t reserved_18_30 : 13;
+ uint64_t grb_partial : 1;
+ uint64_t grb_cnt : 8;
+ uint64_t gwb_cnt : 8;
+ uint64_t reserved_48_63 : 16;
+ } s;
+};
+
+union cpt_lf_q_base {
+ uint64_t u;
+ struct cpt_lf_q_base_s {
+ uint64_t fault : 1;
+ uint64_t stopped : 1;
+ uint64_t reserved_2_6 : 5;
+ uint64_t addr : 46;
+ uint64_t reserved_53_63 : 11;
+ } s;
+};
+
+union cpt_lf_q_size {
+ uint64_t u;
+ struct cpt_lf_q_size_s {
+ uint64_t size_div40 : 15;
+ uint64_t reserved_15_63 : 49;
+ } s;
+};
+
+union cpt_lf_misc_int {
+ uint64_t u;
+ struct cpt_lf_misc_int_s {
+ uint64_t reserved_0_0 : 1;
+ uint64_t nqerr : 1;
+ uint64_t irde : 1;
+ uint64_t nwrp : 1;
+ uint64_t reserved_4_4 : 1;
+ uint64_t hwerr : 1;
+ uint64_t fault : 1;
+ uint64_t reserved_7_63 : 57;
+ } s;
+};
+
+union cpt_inst_w4 {
+ uint64_t u64;
+ struct {
+ uint64_t dlen : 16;
+ uint64_t param2 : 16;
+ uint64_t param1 : 16;
+ uint64_t opcode_major : 8;
+ uint64_t opcode_minor : 8;
+ } s;
+};
+
+union cpt_inst_w7 {
+ uint64_t u64;
+ struct {
+ uint64_t cptr : 60;
+ uint64_t ctx_val : 1;
+ uint64_t egrp : 3;
+ } s;
+};
+
+struct cpt_inst_s {
+ union cpt_inst_w0 {
+ struct {
+ uint64_t nixtxl : 3;
+ uint64_t doneint : 1;
+ uint64_t nixtx_addr : 60;
+ } s;
+ uint64_t u64;
+ } w0;
+
+ uint64_t res_addr;
+
+ union cpt_inst_w2 {
+ struct {
+ uint64_t tag : 32;
+ uint64_t tt : 2;
+ uint64_t grp : 10;
+ uint64_t reserved_172_175 : 4;
+ uint64_t rvu_pf_func : 16;
+ } s;
+ uint64_t u64;
+ } w2;
+
+ union cpt_inst_w3 {
+ struct {
+ uint64_t qord : 1;
+ uint64_t reserved_194_193 : 2;
+ uint64_t wqe_ptr : 61;
+ } s;
+ uint64_t u64;
+ } w3;
+
+ union cpt_inst_w4 w4;
+
+ uint64_t dptr;
+
+ uint64_t rptr;
+
+ union cpt_inst_w7 w7;
+};
+
+union cpt_res_s {
+ struct cpt_cn10k_res_s {
+ uint64_t compcode : 7;
+ uint64_t doneint : 1;
+ uint64_t uc_compcode : 8;
+ uint64_t rlen : 16;
+ uint64_t spi : 32;
+
+ uint64_t esn;
+ } cn10k;
+
+ struct cpt_cn9k_res_s {
+ uint64_t compcode : 8;
+ uint64_t uc_compcode : 8;
+ uint64_t doneint : 1;
+ uint64_t reserved_17_63 : 47;
+
+ uint64_t reserved_64_127;
+ } cn9k;
+};
+
+/* [CN10K, .) */
+struct cpt_parse_hdr_s {
+ /* WORD 0 */
+ union {
+ uint64_t u64;
+ struct {
+ uint8_t pad_len : 3;
+ uint8_t num_frags : 3;
+ uint8_t pkt_out : 2;
+
+ uint8_t err_sum : 1;
+ uint8_t reas_sts : 4;
+ uint8_t reserved_53 : 1;
+ uint8_t et_owr : 1;
+ uint8_t pkt_fmt : 1;
+
+ uint16_t match_id : 16;
+
+ uint32_t cookie : 32;
+ };
+ } w0;
+
+ /* WORD 1 */
+ uint64_t wqe_ptr;
+
+ /* WORD 2 */
+ union {
+ uint64_t u64;
+ struct {
+ uint8_t fi_pad : 3;
+ uint8_t fi_offset : 5;
+ uint8_t il3_off;
+ uint16_t orig_pf_func;
+ uint16_t reserved_145_160;
+ uint16_t frag_age;
+ };
+ } w2;
+
+ /* WORD 3 */
+ union {
+ uint64_t u64;
+ struct {
+ uint32_t spi;
+ uint16_t reserved_209_224;
+ uint8_t uc_ccode;
+ uint8_t hw_ccode;
+ };
+ } w3;
+
+ /* WORD 4 */
+ union {
+ uint64_t u64;
+ uint64_t esn;
+ uint64_t frag1_wqe_ptr;
+ };
+};
+
+union cpt_frag_info {
+ uint16_t info;
+ struct {
+ uint16_t f_off : 13;
+ uint16_t f_mf : 1;
+ uint16_t f_rsv : 2;
+ };
+};
+
+struct cpt_frag_info_s {
+ /* WORD 0 */
+ union {
+ uint64_t u64;
+ struct {
+ union cpt_frag_info f3;
+ union cpt_frag_info f2;
+ union cpt_frag_info f1;
+ union cpt_frag_info f0;
+ };
+ } w0;
+
+ /* WORD 1 */
+ union {
+ uint64_t u64;
+ struct {
+ uint16_t frag_size3;
+ uint16_t frag_size2;
+ uint16_t frag_size1;
+ uint16_t frag_size0;
+ };
+ } w1;
+};
+
+#endif /* __CPT_HW_H__ */
diff --git a/drivers/common/cnxk/roc_api.h b/drivers/common/cnxk/roc_api.h
index 67f5d13..049854d 100644
--- a/drivers/common/cnxk/roc_api.h
+++ b/drivers/common/cnxk/roc_api.h
@@ -54,6 +54,11 @@
#define PCI_DEVID_CN9K_CGX 0xA059
#define PCI_DEVID_CN10K_RPM 0xA060
+#define PCI_DEVID_CN9K_RVU_CPT_PF 0xA0FD
+#define PCI_DEVID_CN9K_RVU_CPT_VF 0xA0FE
+#define PCI_DEVID_CN10K_RVU_CPT_PF 0xA0F2
+#define PCI_DEVID_CN10K_RVU_CPT_VF 0xA0F3
+
#define PCI_SUBSYSTEM_DEVID_CN10KA 0xB900
#define PCI_SUBSYSTEM_DEVID_CN10KAS 0xB900
@@ -64,6 +69,7 @@
#define PCI_SUBSYSTEM_DEVID_CN9KE 0xB100
/* HW structure definition */
+#include "hw/cpt.h"
#include "hw/nix.h"
#include "hw/npa.h"
#include "hw/npc.h"
--
2.7.4
next prev parent reply other threads:[~2021-06-25 5:37 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <patches.dpdk.org/project/dpdk/patch/1622649385-22652-1-git-send-email-anoobj@marvell.com/>
2021-06-25 5:36 ` [dpdk-dev] [PATCH v2 00/17] Add CPT in Marvell CNXK common driver Anoob Joseph
2021-06-25 5:36 ` Anoob Joseph [this message]
2021-06-25 5:36 ` [dpdk-dev] [PATCH v2 02/17] common/cnxk: update Rx inline IPsec mbox message format Anoob Joseph
2021-06-25 5:36 ` [dpdk-dev] [PATCH v2 03/17] common/cnxk: add CPT dev config routines Anoob Joseph
2021-06-25 5:36 ` [dpdk-dev] [PATCH v2 04/17] common/cnxk: add idev CPT set - get Anoob Joseph
2021-06-25 5:36 ` [dpdk-dev] [PATCH v2 05/17] common/cnxk: add mbox to configure RXC Anoob Joseph
2021-06-25 5:36 ` [dpdk-dev] [PATCH v2 06/17] common/cnxk: add CPT LF config Anoob Joseph
2021-06-25 5:36 ` [dpdk-dev] [PATCH v2 07/17] common/cnxk: add CPT diagnostics Anoob Joseph
2021-06-25 5:36 ` [dpdk-dev] [PATCH v2 08/17] common/cnxk: add CPT LF flush Anoob Joseph
2021-06-25 5:36 ` [dpdk-dev] [PATCH v2 09/17] common/cnxk: add inline IPsec configuration mbox Anoob Joseph
2021-06-25 5:36 ` [dpdk-dev] [PATCH v2 10/17] common/cnxk: add SE microcode defines Anoob Joseph
2021-06-25 5:36 ` [dpdk-dev] [PATCH v2 11/17] common/cnxk: add IE " Anoob Joseph
2021-06-25 5:36 ` [dpdk-dev] [PATCH v2 12/17] common/cnxk: add AE " Anoob Joseph
2021-06-25 5:36 ` [dpdk-dev] [PATCH v2 13/17] common/cnxk: add lmtline init Anoob Joseph
2021-06-25 5:36 ` [dpdk-dev] [PATCH v2 14/17] common/cnxk: add fpm tables Anoob Joseph
2021-06-25 5:36 ` [dpdk-dev] [PATCH v2 15/17] common/cnxk: add EC grp static vectors Anoob Joseph
2021-06-25 5:36 ` [dpdk-dev] [PATCH v2 16/17] common/cnxk: add IPsec common code Anoob Joseph
2021-06-25 5:36 ` [dpdk-dev] [PATCH v2 17/17] common/cnxk: add SE set key functions in roc Anoob Joseph
2021-06-28 8:56 ` [dpdk-dev] [PATCH v2 00/17] Add CPT in Marvell CNXK common driver Akhil Goyal
2021-06-28 9:06 ` Akhil Goyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1624599410-29689-2-git-send-email-anoobj@marvell.com \
--to=anoobj@marvell.com \
--cc=adwivedi@marvell.com \
--cc=dev@dpdk.org \
--cc=gakhil@marvell.com \
--cc=jerinj@marvell.com \
--cc=ktejasree@marvell.com \
--cc=thomas@monjalon.net \
--cc=vvelumuri@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).