From: Anoob Joseph <anoobj@marvell.com>
To: Akhil Goyal <gakhil@marvell.com>, Thomas Monjalon <thomas@monjalon.net>
Cc: Tejasree Kondoj <ktejasree@marvell.com>,
Jerin Jacob <jerinj@marvell.com>,
Ankur Dwivedi <adwivedi@marvell.com>, <dev@dpdk.org>,
Anoob Joseph <anoobj@marvell.com>,
Archana Muniganti <marchana@marvell.com>,
"Srujana Challa" <schalla@marvell.com>
Subject: [dpdk-dev] [PATCH v3 2/8] crypto/cnxk: add security session ops
Date: Tue, 29 Jun 2021 13:04:30 +0530 [thread overview]
Message-ID: <1624952076-30928-3-git-send-email-anoobj@marvell.com> (raw)
In-Reply-To: <1624952076-30928-1-git-send-email-anoobj@marvell.com>
From: Tejasree Kondoj <ktejasree@marvell.com>
Add security session ops in cn10k crypto PMD.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
---
drivers/crypto/cnxk/cn10k_cryptodev.c | 2 +
drivers/crypto/cnxk/cn10k_ipsec.c | 275 ++++++++++++++++++++++++++++++++++
drivers/crypto/cnxk/cn10k_ipsec.h | 36 +++++
drivers/crypto/cnxk/cnxk_ipsec.h | 20 +++
drivers/crypto/cnxk/meson.build | 3 +
5 files changed, 336 insertions(+)
create mode 100644 drivers/crypto/cnxk/cn10k_ipsec.c
create mode 100644 drivers/crypto/cnxk/cn10k_ipsec.h
create mode 100644 drivers/crypto/cnxk/cnxk_ipsec.h
diff --git a/drivers/crypto/cnxk/cn10k_cryptodev.c b/drivers/crypto/cnxk/cn10k_cryptodev.c
index ffe654c..cacf9c2 100644
--- a/drivers/crypto/cnxk/cn10k_cryptodev.c
+++ b/drivers/crypto/cnxk/cn10k_cryptodev.c
@@ -12,6 +12,7 @@
#include "cn10k_cryptodev.h"
#include "cn10k_cryptodev_ops.h"
+#include "cn10k_ipsec.h"
#include "cnxk_cryptodev.h"
#include "cnxk_cryptodev_capabilities.h"
#include "cnxk_cryptodev_sec.h"
@@ -101,6 +102,7 @@ cn10k_cpt_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
RTE_CRYPTODEV_FF_DIGEST_ENCRYPTED;
cn10k_cpt_set_enqdeq_fns(dev);
+ cn10k_sec_ops_override();
return 0;
diff --git a/drivers/crypto/cnxk/cn10k_ipsec.c b/drivers/crypto/cnxk/cn10k_ipsec.c
new file mode 100644
index 0000000..1d567bf
--- /dev/null
+++ b/drivers/crypto/cnxk/cn10k_ipsec.c
@@ -0,0 +1,275 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2021 Marvell.
+ */
+
+#include <rte_malloc.h>
+#include <rte_cryptodev.h>
+#include <rte_esp.h>
+#include <rte_ip.h>
+#include <rte_security.h>
+#include <rte_security_driver.h>
+#include <rte_udp.h>
+
+#include "cnxk_cryptodev.h"
+#include "cnxk_ipsec.h"
+#include "cnxk_security.h"
+#include "cn10k_ipsec.h"
+
+#include "roc_api.h"
+
+static int
+ipsec_xform_aead_verify(struct rte_security_ipsec_xform *ipsec_xfrm,
+ struct rte_crypto_sym_xform *crypto_xfrm)
+{
+ if (ipsec_xfrm->direction == RTE_SECURITY_IPSEC_SA_DIR_EGRESS &&
+ crypto_xfrm->aead.op != RTE_CRYPTO_AEAD_OP_ENCRYPT)
+ return -EINVAL;
+
+ if (ipsec_xfrm->direction == RTE_SECURITY_IPSEC_SA_DIR_INGRESS &&
+ crypto_xfrm->aead.op != RTE_CRYPTO_AEAD_OP_DECRYPT)
+ return -EINVAL;
+
+ if (crypto_xfrm->aead.algo == RTE_CRYPTO_AEAD_AES_GCM) {
+ switch (crypto_xfrm->aead.key.length) {
+ case ROC_CPT_AES128_KEY_LEN:
+ case ROC_CPT_AES192_KEY_LEN:
+ case ROC_CPT_AES256_KEY_LEN:
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+ }
+
+ return -ENOTSUP;
+}
+
+static int
+cn10k_ipsec_xform_verify(struct rte_security_ipsec_xform *ipsec_xfrm,
+ struct rte_crypto_sym_xform *crypto_xfrm)
+{
+ if ((ipsec_xfrm->direction != RTE_SECURITY_IPSEC_SA_DIR_INGRESS) &&
+ (ipsec_xfrm->direction != RTE_SECURITY_IPSEC_SA_DIR_EGRESS))
+ return -EINVAL;
+
+ if ((ipsec_xfrm->proto != RTE_SECURITY_IPSEC_SA_PROTO_ESP) &&
+ (ipsec_xfrm->proto != RTE_SECURITY_IPSEC_SA_PROTO_AH))
+ return -EINVAL;
+
+ if ((ipsec_xfrm->mode != RTE_SECURITY_IPSEC_SA_MODE_TRANSPORT) &&
+ (ipsec_xfrm->mode != RTE_SECURITY_IPSEC_SA_MODE_TUNNEL))
+ return -EINVAL;
+
+ if ((ipsec_xfrm->tunnel.type != RTE_SECURITY_IPSEC_TUNNEL_IPV4) &&
+ (ipsec_xfrm->tunnel.type != RTE_SECURITY_IPSEC_TUNNEL_IPV6))
+ return -EINVAL;
+
+ if (crypto_xfrm->type == RTE_CRYPTO_SYM_XFORM_AEAD)
+ return ipsec_xform_aead_verify(ipsec_xfrm, crypto_xfrm);
+
+ return -ENOTSUP;
+}
+
+static uint64_t
+ipsec_cpt_inst_w7_get(struct roc_cpt *roc_cpt, void *sa)
+{
+ union cpt_inst_w7 w7;
+
+ w7.u64 = 0;
+ w7.s.egrp = roc_cpt->eng_grp[CPT_ENG_TYPE_IE];
+ w7.s.ctx_val = 1;
+ w7.s.cptr = (uint64_t)sa;
+ rte_mb();
+
+ return w7.u64;
+}
+
+static int
+cn10k_ipsec_outb_sa_create(struct roc_cpt *roc_cpt,
+ struct rte_security_ipsec_xform *ipsec_xfrm,
+ struct rte_crypto_sym_xform *crypto_xfrm,
+ struct rte_security_session *sec_sess)
+{
+ struct roc_ot_ipsec_outb_sa *out_sa;
+ struct cnxk_ipsec_outb_rlens rlens;
+ struct cn10k_sec_session *sess;
+ struct cn10k_ipsec_sa *sa;
+ union cpt_inst_w4 inst_w4;
+ int ret;
+
+ sess = get_sec_session_private_data(sec_sess);
+ sa = &sess->sa;
+ out_sa = &sa->out_sa;
+
+ memset(out_sa, 0, sizeof(struct roc_ot_ipsec_outb_sa));
+
+ /* Translate security parameters to SA */
+ ret = cnxk_ot_ipsec_outb_sa_fill(out_sa, ipsec_xfrm, crypto_xfrm);
+ if (ret)
+ return ret;
+
+ sa->inst.w7 = ipsec_cpt_inst_w7_get(roc_cpt, sa);
+
+ /* Get Rlen calculation data */
+ ret = cnxk_ipsec_outb_rlens_get(&rlens, ipsec_xfrm, crypto_xfrm);
+ if (ret)
+ return ret;
+
+ sa->partial_len = rlens.partial_len;
+ sa->roundup_byte = rlens.roundup_byte;
+ sa->roundup_len = rlens.roundup_len;
+
+ /* pre-populate CPT INST word 4 */
+ inst_w4.u64 = 0;
+ inst_w4.s.opcode_major = ROC_IE_OT_MAJOR_OP_PROCESS_OUTBOUND_IPSEC;
+ inst_w4.s.param1 = 0;
+ sa->inst.w4 = inst_w4.u64;
+
+ return 0;
+}
+
+static int
+cn10k_ipsec_inb_sa_create(struct roc_cpt *roc_cpt,
+ struct rte_security_ipsec_xform *ipsec_xfrm,
+ struct rte_crypto_sym_xform *crypto_xfrm,
+ struct rte_security_session *sec_sess)
+{
+ struct roc_ot_ipsec_inb_sa *in_sa;
+ struct cn10k_sec_session *sess;
+ struct cn10k_ipsec_sa *sa;
+ union cpt_inst_w4 inst_w4;
+ int ret;
+
+ sess = get_sec_session_private_data(sec_sess);
+ sa = &sess->sa;
+ in_sa = &sa->in_sa;
+
+ /* Translate security parameters to SA */
+ ret = cnxk_ot_ipsec_inb_sa_fill(in_sa, ipsec_xfrm, crypto_xfrm);
+ if (ret)
+ return ret;
+
+ /* TODO add support for antireplay */
+ sa->in_sa.w0.s.ar_win = 0;
+
+ /* TODO add support for udp encap */
+
+ sa->inst.w7 = ipsec_cpt_inst_w7_get(roc_cpt, sa);
+
+ /* pre-populate CPT INST word 4 */
+ inst_w4.u64 = 0;
+ inst_w4.s.opcode_major = ROC_IE_OT_MAJOR_OP_PROCESS_INBOUND_IPSEC;
+
+ /* Disable checksum verification for now */
+ inst_w4.s.param1 = 7;
+ sa->inst.w4 = inst_w4.u64;
+
+ return 0;
+}
+
+static int
+cn10k_ipsec_session_create(void *dev,
+ struct rte_security_ipsec_xform *ipsec_xfrm,
+ struct rte_crypto_sym_xform *crypto_xfrm,
+ struct rte_security_session *sess)
+{
+ struct rte_cryptodev *crypto_dev = dev;
+ struct roc_cpt *roc_cpt;
+ struct cnxk_cpt_vf *vf;
+ int ret;
+
+ vf = crypto_dev->data->dev_private;
+ roc_cpt = &vf->cpt;
+
+ if (crypto_dev->data->queue_pairs[0] == NULL) {
+ plt_err("Setup cpt queue pair before creating security session");
+ return -EPERM;
+ }
+
+ ret = cn10k_ipsec_xform_verify(ipsec_xfrm, crypto_xfrm);
+ if (ret)
+ return ret;
+
+ if (ipsec_xfrm->direction == RTE_SECURITY_IPSEC_SA_DIR_INGRESS)
+ return cn10k_ipsec_inb_sa_create(roc_cpt, ipsec_xfrm,
+ crypto_xfrm, sess);
+ else
+ return cn10k_ipsec_outb_sa_create(roc_cpt, ipsec_xfrm,
+ crypto_xfrm, sess);
+}
+
+static int
+cn10k_sec_session_create(void *device, struct rte_security_session_conf *conf,
+ struct rte_security_session *sess,
+ struct rte_mempool *mempool)
+{
+ struct cn10k_sec_session *priv;
+ int ret;
+
+ if (conf->action_type != RTE_SECURITY_ACTION_TYPE_LOOKASIDE_PROTOCOL)
+ return -EINVAL;
+
+ if (rte_security_dynfield_register() < 0)
+ return -ENOTSUP;
+
+ if (rte_mempool_get(mempool, (void **)&priv)) {
+ plt_err("Could not allocate security session private data");
+ return -ENOMEM;
+ }
+
+ set_sec_session_private_data(sess, priv);
+
+ priv->userdata = conf->userdata;
+
+ if (conf->protocol != RTE_SECURITY_PROTOCOL_IPSEC) {
+ ret = -ENOTSUP;
+ goto mempool_put;
+ }
+ ret = cn10k_ipsec_session_create(device, &conf->ipsec,
+ conf->crypto_xform, sess);
+ if (ret)
+ goto mempool_put;
+
+ return 0;
+
+mempool_put:
+ rte_mempool_put(mempool, priv);
+ set_sec_session_private_data(sess, NULL);
+ return ret;
+}
+
+static int
+cn10k_sec_session_destroy(void *device __rte_unused,
+ struct rte_security_session *sess)
+{
+ struct cn10k_sec_session *priv;
+ struct rte_mempool *sess_mp;
+
+ priv = get_sec_session_private_data(sess);
+
+ if (priv == NULL)
+ return 0;
+
+ sess_mp = rte_mempool_from_obj(priv);
+
+ set_sec_session_private_data(sess, NULL);
+ rte_mempool_put(sess_mp, priv);
+
+ return 0;
+}
+
+static unsigned int
+cn10k_sec_session_get_size(void *device __rte_unused)
+{
+ return sizeof(struct cn10k_sec_session);
+}
+
+/* Update platform specific security ops */
+void
+cn10k_sec_ops_override(void)
+{
+ /* Update platform specific ops */
+ cnxk_sec_ops.session_create = cn10k_sec_session_create;
+ cnxk_sec_ops.session_destroy = cn10k_sec_session_destroy;
+ cnxk_sec_ops.session_get_size = cn10k_sec_session_get_size;
+}
diff --git a/drivers/crypto/cnxk/cn10k_ipsec.h b/drivers/crypto/cnxk/cn10k_ipsec.h
new file mode 100644
index 0000000..668282f
--- /dev/null
+++ b/drivers/crypto/cnxk/cn10k_ipsec.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2021 Marvell.
+ */
+
+#ifndef __CN10K_IPSEC_H__
+#define __CN10K_IPSEC_H__
+
+#include <rte_security.h>
+
+#include "cnxk_ipsec.h"
+
+#define CN10K_IPSEC_SA_CTX_HDR_SIZE 1
+
+struct cn10k_ipsec_sa {
+ union {
+ /** Inbound SA */
+ struct roc_ot_ipsec_inb_sa in_sa;
+ /** Outbound SA */
+ struct roc_ot_ipsec_outb_sa out_sa;
+ };
+ /** Pre-populated CPT inst words */
+ struct cnxk_cpt_inst_tmpl inst;
+ uint8_t partial_len;
+ uint8_t roundup_len;
+ uint8_t roundup_byte;
+};
+
+struct cn10k_sec_session {
+ struct cn10k_ipsec_sa sa;
+ void *userdata;
+ /**< Userdata registered by the application */
+} __rte_cache_aligned;
+
+void cn10k_sec_ops_override(void);
+
+#endif /* __CN10K_IPSEC_H__ */
diff --git a/drivers/crypto/cnxk/cnxk_ipsec.h b/drivers/crypto/cnxk/cnxk_ipsec.h
new file mode 100644
index 0000000..f6897a0
--- /dev/null
+++ b/drivers/crypto/cnxk/cnxk_ipsec.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2021 Marvell.
+ */
+#ifndef __CNXK_IPSEC_H__
+#define __CNXK_IPSEC_H__
+
+#include <rte_security.h>
+#include <rte_security_driver.h>
+
+#include "roc_api.h"
+
+extern struct rte_security_ops cnxk_sec_ops;
+
+struct cnxk_cpt_inst_tmpl {
+ uint64_t w2;
+ uint64_t w4;
+ uint64_t w7;
+};
+
+#endif /* __CNXK_IPSEC_H__ */
diff --git a/drivers/crypto/cnxk/meson.build b/drivers/crypto/cnxk/meson.build
index a2b461e..c56d6cf 100644
--- a/drivers/crypto/cnxk/meson.build
+++ b/drivers/crypto/cnxk/meson.build
@@ -13,6 +13,7 @@ sources = files(
'cn9k_cryptodev_ops.c',
'cn10k_cryptodev.c',
'cn10k_cryptodev_ops.c',
+ 'cn10k_ipsec.c',
'cnxk_cryptodev.c',
'cnxk_cryptodev_capabilities.c',
'cnxk_cryptodev_ops.c',
@@ -20,3 +21,5 @@ sources = files(
)
deps += ['bus_pci', 'common_cnxk', 'security']
+
+includes += include_directories('../../../lib/net')
--
2.7.4
next prev parent reply other threads:[~2021-06-29 7:35 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-02 17:10 [dpdk-dev] [PATCH 0/4] Add rte_security in crypto_cn10k PMD Anoob Joseph
2021-06-02 17:10 ` [dpdk-dev] [PATCH 1/4] crypto/cnxk: add security ctx skeleton Anoob Joseph
2021-06-16 20:14 ` Akhil Goyal
2021-06-25 6:15 ` [dpdk-dev] [PATCH v2 0/4] Add rte_security in crypto_cn10k PMD Anoob Joseph
2021-06-25 6:15 ` [dpdk-dev] [PATCH v2 1/4] crypto/cnxk: add security ctx skeleton Anoob Joseph
2021-06-25 6:15 ` [dpdk-dev] [PATCH v2 2/4] crypto/cnxk: add security session ops Anoob Joseph
2021-06-25 6:15 ` [dpdk-dev] [PATCH v2 3/4] crypto/cnxk: add security handling in datapath ops Anoob Joseph
2021-06-25 6:15 ` [dpdk-dev] [PATCH v2 4/4] crypto/cnxk: add security capabilities Anoob Joseph
2021-06-29 7:34 ` [dpdk-dev] [PATCH v3 0/8] Add lookaside IPsec and asymmetric in cnxk crypto PMDs Anoob Joseph
2021-06-29 7:34 ` [dpdk-dev] [PATCH v3 1/8] crypto/cnxk: add security ctx skeleton Anoob Joseph
2021-06-29 7:34 ` Anoob Joseph [this message]
2021-06-29 7:34 ` [dpdk-dev] [PATCH v3 3/8] crypto/cnxk: add security handling in datapath ops Anoob Joseph
2021-06-29 7:34 ` [dpdk-dev] [PATCH v3 4/8] crypto/cnxk: add security capabilities Anoob Joseph
2021-06-29 7:34 ` [dpdk-dev] [PATCH v3 5/8] crypto/cnxk: add asymmetric session ops Anoob Joseph
2021-06-29 7:34 ` [dpdk-dev] [PATCH v3 6/8] crypto/cnxk: add asymmetric datapath ops Anoob Joseph
2021-06-29 7:34 ` [dpdk-dev] [PATCH v3 7/8] crypto/cnxk: add asymmetric capabilities Anoob Joseph
2021-06-29 7:34 ` [dpdk-dev] [PATCH v3 8/8] test/crypto: add cnxk for asymmetric cases Anoob Joseph
2021-06-29 19:52 ` [dpdk-dev] [PATCH v3 0/8] Add lookaside IPsec and asymmetric in cnxk crypto PMDs Akhil Goyal
2021-06-02 17:11 ` [dpdk-dev] [PATCH 2/4] crypto/cnxk: add security capabilities Anoob Joseph
2021-06-02 17:11 ` [dpdk-dev] [PATCH 3/4] crypto/cnxk: add security session ops Anoob Joseph
2021-06-16 20:11 ` Akhil Goyal
2021-06-17 7:16 ` Anoob Joseph
2021-06-02 17:11 ` [dpdk-dev] [PATCH 4/4] crypto/cnxk: add security handling in datapath ops Anoob Joseph
2021-06-16 20:15 ` [dpdk-dev] [PATCH 0/4] Add rte_security in crypto_cn10k PMD Akhil Goyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1624952076-30928-3-git-send-email-anoobj@marvell.com \
--to=anoobj@marvell.com \
--cc=adwivedi@marvell.com \
--cc=dev@dpdk.org \
--cc=gakhil@marvell.com \
--cc=jerinj@marvell.com \
--cc=ktejasree@marvell.com \
--cc=marchana@marvell.com \
--cc=schalla@marvell.com \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).