From: Anoob Joseph <anoobj@marvell.com>
To: Akhil Goyal <gakhil@marvell.com>,
Declan Doherty <declan.doherty@intel.com>,
Fan Zhang <roy.fan.zhang@intel.com>,
"Konstantin Ananyev" <konstantin.ananyev@intel.com>
Cc: Tejasree Kondoj <ktejasree@marvell.com>,
Jerin Jacob <jerinj@marvell.com>,
Archana Muniganti <marchana@marvell.com>,
Hemant Agrawal <hemant.agrawal@nxp.com>,
Radu Nicolau <radu.nicolau@intel.com>,
Ciara Power <ciara.power@intel.com>,
Gagandeep Singh <g.singh@nxp.com>, <dev@dpdk.org>,
Anoob Joseph <anoobj@marvell.com>
Subject: [dpdk-dev] [PATCH v3 2/3] crypto/cnxk: add IV in SA in lookaside IPsec debug mode
Date: Tue, 7 Sep 2021 21:47:41 +0530 [thread overview]
Message-ID: <1631031463-211-3-git-send-email-anoobj@marvell.com> (raw)
In-Reply-To: <1631031463-211-1-git-send-email-anoobj@marvell.com>
From: Tejasree Kondoj <ktejasree@marvell.com>
Adding IV in SA in lookaside IPsec debug mode. It helps
to verify lookaside PMD using known outbound vectors in
lookaside autotest.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
---
drivers/crypto/cnxk/cn10k_ipsec.c | 16 +++++++++
drivers/crypto/cnxk/cn10k_ipsec.h | 2 ++
drivers/crypto/cnxk/cn10k_ipsec_la_ops.h | 44 +++++++++++++++++++++++
drivers/crypto/cnxk/cnxk_cryptodev_capabilities.c | 29 +++++++++++++--
drivers/crypto/cnxk/meson.build | 6 ++++
5 files changed, 95 insertions(+), 2 deletions(-)
diff --git a/drivers/crypto/cnxk/cn10k_ipsec.c b/drivers/crypto/cnxk/cn10k_ipsec.c
index 5c57cf2..ebb2a7e 100644
--- a/drivers/crypto/cnxk/cn10k_ipsec.c
+++ b/drivers/crypto/cnxk/cn10k_ipsec.c
@@ -57,6 +57,22 @@ cn10k_ipsec_outb_sa_create(struct roc_cpt *roc_cpt,
sa->inst.w7 = ipsec_cpt_inst_w7_get(roc_cpt, sa);
+#ifdef LA_IPSEC_DEBUG
+ /* Use IV from application in debug mode */
+ if (ipsec_xfrm->options.iv_gen_disable == 1) {
+ out_sa->w2.s.iv_src = ROC_IE_OT_SA_IV_SRC_FROM_SA;
+ if (crypto_xfrm->type == RTE_CRYPTO_SYM_XFORM_AEAD) {
+ sa->iv_offset = crypto_xfrm->aead.iv.offset;
+ sa->iv_length = crypto_xfrm->aead.iv.length;
+ }
+ }
+#else
+ if (ipsec_xfrm->options.iv_gen_disable != 0) {
+ plt_err("Application provided IV not supported");
+ return -ENOTSUP;
+ }
+#endif
+
/* Get Rlen calculation data */
ret = cnxk_ipsec_outb_rlens_get(&rlens, ipsec_xfrm, crypto_xfrm);
if (ret)
diff --git a/drivers/crypto/cnxk/cn10k_ipsec.h b/drivers/crypto/cnxk/cn10k_ipsec.h
index bc52c60..6f974b7 100644
--- a/drivers/crypto/cnxk/cn10k_ipsec.h
+++ b/drivers/crypto/cnxk/cn10k_ipsec.h
@@ -21,6 +21,8 @@ struct cn10k_ipsec_sa {
/** Pre-populated CPT inst words */
struct cnxk_cpt_inst_tmpl inst;
uint16_t max_extended_len;
+ uint16_t iv_offset;
+ uint8_t iv_length;
};
struct cn10k_sec_session {
diff --git a/drivers/crypto/cnxk/cn10k_ipsec_la_ops.h b/drivers/crypto/cnxk/cn10k_ipsec_la_ops.h
index fe91638..862476a 100644
--- a/drivers/crypto/cnxk/cn10k_ipsec_la_ops.h
+++ b/drivers/crypto/cnxk/cn10k_ipsec_la_ops.h
@@ -12,6 +12,41 @@
#include "cn10k_ipsec.h"
#include "cnxk_cryptodev.h"
+static inline void
+ipsec_po_sa_iv_set(struct cn10k_ipsec_sa *sess, struct rte_crypto_op *cop)
+{
+ uint64_t *iv = &sess->out_sa.iv.u64[0];
+ uint64_t *tmp_iv;
+
+ memcpy(iv, rte_crypto_op_ctod_offset(cop, uint8_t *, sess->iv_offset),
+ 16);
+ tmp_iv = (uint64_t *)iv;
+ *tmp_iv = rte_be_to_cpu_64(*tmp_iv);
+
+ tmp_iv = (uint64_t *)(iv + 1);
+ *tmp_iv = rte_be_to_cpu_64(*tmp_iv);
+}
+
+static inline void
+ipsec_po_sa_aes_gcm_iv_set(struct cn10k_ipsec_sa *sess,
+ struct rte_crypto_op *cop)
+{
+ uint8_t *iv = &sess->out_sa.iv.s.iv_dbg1[0];
+ uint32_t *tmp_iv;
+
+ memcpy(iv, rte_crypto_op_ctod_offset(cop, uint8_t *, sess->iv_offset),
+ 4);
+ tmp_iv = (uint32_t *)iv;
+ *tmp_iv = rte_be_to_cpu_32(*tmp_iv);
+
+ iv = &sess->out_sa.iv.s.iv_dbg2[0];
+ memcpy(iv,
+ rte_crypto_op_ctod_offset(cop, uint8_t *, sess->iv_offset + 4),
+ 4);
+ tmp_iv = (uint32_t *)iv;
+ *tmp_iv = rte_be_to_cpu_32(*tmp_iv);
+}
+
static __rte_always_inline int
process_outb_sa(struct rte_crypto_op *cop, struct cn10k_ipsec_sa *sess,
struct cpt_inst_s *inst)
@@ -24,6 +59,15 @@ process_outb_sa(struct rte_crypto_op *cop, struct cn10k_ipsec_sa *sess,
return -ENOMEM;
}
+#ifdef LA_IPSEC_DEBUG
+ if (sess->out_sa.w2.s.iv_src == ROC_IE_OT_SA_IV_SRC_FROM_SA) {
+ if (sess->out_sa.w2.s.enc_type == ROC_IE_OT_SA_ENC_AES_GCM)
+ ipsec_po_sa_aes_gcm_iv_set(sess, cop);
+ else
+ ipsec_po_sa_iv_set(sess, cop);
+ }
+#endif
+
/* Prepare CPT instruction */
inst->w4.u64 = sess->inst.w4;
inst->w4.s.dlen = rte_pktmbuf_pkt_len(m_src);
diff --git a/drivers/crypto/cnxk/cnxk_cryptodev_capabilities.c b/drivers/crypto/cnxk/cnxk_cryptodev_capabilities.c
index c4f7824..4b97639 100644
--- a/drivers/crypto/cnxk/cnxk_cryptodev_capabilities.c
+++ b/drivers/crypto/cnxk/cnxk_cryptodev_capabilities.c
@@ -807,7 +807,7 @@ static const struct rte_security_capability sec_caps_templ[] = {
.proto = RTE_SECURITY_IPSEC_SA_PROTO_ESP,
.mode = RTE_SECURITY_IPSEC_SA_MODE_TUNNEL,
.direction = RTE_SECURITY_IPSEC_SA_DIR_INGRESS,
- .options = { 0 }
+ .options = { 0 },
},
.crypto_capabilities = NULL,
},
@@ -818,7 +818,7 @@ static const struct rte_security_capability sec_caps_templ[] = {
.proto = RTE_SECURITY_IPSEC_SA_PROTO_ESP,
.mode = RTE_SECURITY_IPSEC_SA_MODE_TUNNEL,
.direction = RTE_SECURITY_IPSEC_SA_DIR_EGRESS,
- .options = { 0 }
+ .options = { 0 },
},
.crypto_capabilities = NULL,
},
@@ -913,6 +913,24 @@ cnxk_sec_caps_update(struct rte_security_capability *sec_cap)
sec_cap->ipsec.options.udp_encap = 1;
}
+static void
+cn10k_sec_caps_update(struct rte_security_capability *sec_cap)
+{
+ if (sec_cap->ipsec.direction == RTE_SECURITY_IPSEC_SA_DIR_EGRESS) {
+#ifdef LA_IPSEC_DEBUG
+ sec_cap->ipsec.options.iv_gen_disable = 1;
+#endif
+ }
+}
+
+static void
+cn9k_sec_caps_update(struct rte_security_capability *sec_cap)
+{
+ if (sec_cap->ipsec.direction == RTE_SECURITY_IPSEC_SA_DIR_EGRESS) {
+ sec_cap->ipsec.options.iv_gen_disable = 1;
+ }
+}
+
void
cnxk_cpt_caps_populate(struct cnxk_cpt_vf *vf)
{
@@ -928,6 +946,13 @@ cnxk_cpt_caps_populate(struct cnxk_cpt_vf *vf)
vf->sec_caps[i].crypto_capabilities = vf->sec_crypto_caps;
cnxk_sec_caps_update(&vf->sec_caps[i]);
+
+ if (roc_model_is_cn10k())
+ cn10k_sec_caps_update(&vf->sec_caps[i]);
+
+ if (roc_model_is_cn9k())
+ cn9k_sec_caps_update(&vf->sec_caps[i]);
+
}
}
diff --git a/drivers/crypto/cnxk/meson.build b/drivers/crypto/cnxk/meson.build
index e40d132..437d208 100644
--- a/drivers/crypto/cnxk/meson.build
+++ b/drivers/crypto/cnxk/meson.build
@@ -24,3 +24,9 @@ sources = files(
deps += ['bus_pci', 'common_cnxk', 'security', 'eventdev']
includes += include_directories('../../../lib/net')
+
+if get_option('buildtype').contains('debug')
+ cflags += [ '-DLA_IPSEC_DEBUG' ]
+else
+ cflags += [ '-ULA_IPSEC_DEBUG' ]
+endif
--
2.7.4
next prev parent reply other threads:[~2021-09-07 16:18 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-16 5:59 [dpdk-dev] [PATCH 0/3] Add user specified IV with lookaside IPsec Anoob Joseph
2021-08-16 5:59 ` [dpdk-dev] [PATCH 1/3] security: support user specified IV Anoob Joseph
2021-08-16 5:59 ` [dpdk-dev] [PATCH 2/3] crypto/cnxk: add IV in SA in lookaside IPsec debug mode Anoob Joseph
2021-08-16 5:59 ` [dpdk-dev] [PATCH 3/3] test/crypto: add outbound known vector tests Anoob Joseph
2021-09-06 14:58 ` [dpdk-dev] [PATCH v2 0/3] Add user specified IV with lookaside IPsec Anoob Joseph
2021-09-06 14:58 ` [dpdk-dev] [PATCH v2 1/3] security: support user specified IV Anoob Joseph
2021-09-06 19:07 ` Akhil Goyal
2021-09-06 14:58 ` [dpdk-dev] [PATCH v2 2/3] crypto/cnxk: add IV in SA in lookaside IPsec debug mode Anoob Joseph
2021-09-06 19:08 ` Akhil Goyal
2021-09-06 14:58 ` [dpdk-dev] [PATCH v2 3/3] test/crypto: add outbound known vector tests Anoob Joseph
2021-09-06 19:09 ` Akhil Goyal
2021-09-07 16:17 ` [dpdk-dev] [PATCH v3 0/3] Add user specified IV with lookaside IPsec Anoob Joseph
2021-09-07 16:17 ` [dpdk-dev] [PATCH v3 1/3] security: support user specified IV Anoob Joseph
2021-09-16 11:14 ` Ananyev, Konstantin
2021-09-07 16:17 ` Anoob Joseph [this message]
2021-09-07 16:17 ` [dpdk-dev] [PATCH v3 3/3] test/crypto: add outbound known vector tests Anoob Joseph
2021-09-28 8:32 ` [dpdk-dev] [PATCH v3 0/3] Add user specified IV with lookaside IPsec Akhil Goyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1631031463-211-3-git-send-email-anoobj@marvell.com \
--to=anoobj@marvell.com \
--cc=ciara.power@intel.com \
--cc=declan.doherty@intel.com \
--cc=dev@dpdk.org \
--cc=g.singh@nxp.com \
--cc=gakhil@marvell.com \
--cc=hemant.agrawal@nxp.com \
--cc=jerinj@marvell.com \
--cc=konstantin.ananyev@intel.com \
--cc=ktejasree@marvell.com \
--cc=marchana@marvell.com \
--cc=radu.nicolau@intel.com \
--cc=roy.fan.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).