Running DPDK 20.02-rc3 and attempting to use the MLX5 PMD as a non-root
user. When starting testpmd I'm receiving the following error on both
Power and x86_64 platforms (full output further down):
net_mlx5: probe of PCI device 0000:01:00.0 aborted after encountering
an error: Operation not supported
Walking through the code (mlx5_pci_probe, mlx5_dev_spawn,
mlx5_hrxq_drop_new, mlx5_glue_create_qp_ex) I see the call to
ibv_create_qp_ex() is failing. Why might this be a problem for a
non-root user? I verified that RDMA works correctly on the RHEL 8.1
platform with rping/udaddy as a non-root user.
Dave
$ ~/src/dpdk/build/app/dpdk-testpmd --log-level='pmd.net.mlx5:8' -w
0000:01:00.0 -w 0000:01:00.1 -l 4,8-63 -n 4 -- --rxq=16 --rxd=4096
--txq=16 --txd=1024 --nb-cores=32 -i -a --numa --forward-mode=macswap
EAL: Detected 128 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /run/user/1003/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'VA'
EAL: 2048 hugepages of size 2097152 reserved, but no mounted
hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: VFIO support initialized
EAL: PCI device 0000:01:00.0 on NUMA socket 0
EAL: probe driver: 15b3:1019 net_mlx5
net_mlx5: checking device "mlx5_1"
net_mlx5: checking device "mlx5_3"
net_mlx5: checking device "mlx5_0"
net_mlx5: PCI information matches for device "mlx5_0"
net_mlx5: checking device "mlx5_2"
net_mlx5: no E-Switch support detected
net_mlx5: naming Ethernet device "0000:01:00.0"
net_mlx5: DevX is NOT supported
net_mlx5: enhanced MPW is supported
net_mlx5: SWP support: 7
net_mlx5: min_single_stride_log_num_of_bytes: 6
net_mlx5: max_single_stride_log_num_of_bytes: 13
net_mlx5: min_single_wqe_log_num_of_strides: 9
net_mlx5: max_single_wqe_log_num_of_strides: 16
net_mlx5: supported_qpts: 256
net_mlx5: device supports Multi-Packet RQ
net_mlx5: tunnel offloading is supported
net_mlx5: MPLS over GRE/UDP tunnel offloading is not supported
net_mlx5: checksum offloading is supported
net_mlx5: DV flow is not supported
net_mlx5: maximum Rx indirection table size is 512
net_mlx5: VLAN stripping is supported
net_mlx5: FCS stripping configuration is supported
net_mlx5: enhanced MPS is enabled
net_mlx5: port 0 MAC address is ec:0d:9a:ca:b2:b4
net_mlx5: port 0 MTU is 9238
net_mlx5: port 0 forcing Ethernet interface up
net_mlx5: min tx inline configured: 0
net_mlx5: probe of PCI device 0000:01:00.0 aborted after encountering
an error: Operation not supported
EAL: Requested device 0000:01:00.0 cannot be used