* [dpdk-dev] [PATCH] PPC: Fix NUMA node numbering on IBM POWER8 LE machine
@ 2015-08-14 12:19 Chao Zhu
2015-09-15 7:46 ` [dpdk-dev] Fwd: " Chao Zhu
0 siblings, 1 reply; 6+ messages in thread
From: Chao Zhu @ 2015-08-14 12:19 UTC (permalink / raw)
To: dev
When Linux is running on bare metal, it gets the raw hardware
information. On POWER8 little endian bare metal machine, the node number
is not continuous. It will jump from 0 to other values, for example, it
can be 0, 1, 16, 17. This patch modified the CONFIG_RTE_MAX_NUMA_NODES
value to make dpdk work on POWER8 bare metal little endian machine.
Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
---
config/common_linuxapp | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/config/common_linuxapp b/config/common_linuxapp
index 0de43d5..82a027e 100644
--- a/config/common_linuxapp
+++ b/config/common_linuxapp
@@ -98,7 +98,7 @@ CONFIG_RTE_NEXT_ABI=y
#
CONFIG_RTE_LIBRTE_EAL=y
CONFIG_RTE_MAX_LCORE=128
-CONFIG_RTE_MAX_NUMA_NODES=8
+CONFIG_RTE_MAX_NUMA_NODES=32
CONFIG_RTE_MAX_MEMSEG=256
CONFIG_RTE_MAX_MEMZONE=2560
CONFIG_RTE_MAX_TAILQ=32
--
1.7.1
^ permalink raw reply [flat|nested] 6+ messages in thread
* [dpdk-dev] Fwd: [PATCH] PPC: Fix NUMA node numbering on IBM POWER8 LE machine
2015-08-14 12:19 [dpdk-dev] [PATCH] PPC: Fix NUMA node numbering on IBM POWER8 LE machine Chao Zhu
@ 2015-09-15 7:46 ` Chao Zhu
2015-09-15 9:01 ` Bruce Richardson
0 siblings, 1 reply; 6+ messages in thread
From: Chao Zhu @ 2015-09-15 7:46 UTC (permalink / raw)
To: dev, thomas.monjalon
Any response of this patch?
-------- Forwarded Message --------
Subject: [dpdk-dev] [PATCH] PPC: Fix NUMA node numbering on IBM POWER8
LE machine
Date: Fri, 14 Aug 2015 20:19:48 +0800
From: Chao Zhu <chaozhu@linux.vnet.ibm.com>
To: dev@dpdk.org
When Linux is running on bare metal, it gets the raw hardware
information. On POWER8 little endian bare metal machine, the node number
is not continuous. It will jump from 0 to other values, for example, it
can be 0, 1, 16, 17. This patch modified the CONFIG_RTE_MAX_NUMA_NODES
value to make dpdk work on POWER8 bare metal little endian machine.
Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
---
config/common_linuxapp | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/config/common_linuxapp b/config/common_linuxapp
index 0de43d5..82a027e 100644
--- a/config/common_linuxapp
+++ b/config/common_linuxapp
@@ -98,7 +98,7 @@ CONFIG_RTE_NEXT_ABI=y
#
CONFIG_RTE_LIBRTE_EAL=y
CONFIG_RTE_MAX_LCORE=128
-CONFIG_RTE_MAX_NUMA_NODES=8
+CONFIG_RTE_MAX_NUMA_NODES=32
CONFIG_RTE_MAX_MEMSEG=256
CONFIG_RTE_MAX_MEMZONE=2560
CONFIG_RTE_MAX_TAILQ=32
--
1.7.1
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-dev] Fwd: [PATCH] PPC: Fix NUMA node numbering on IBM POWER8 LE machine
2015-09-15 7:46 ` [dpdk-dev] Fwd: " Chao Zhu
@ 2015-09-15 9:01 ` Bruce Richardson
2015-09-16 2:02 ` Chao Zhu
0 siblings, 1 reply; 6+ messages in thread
From: Bruce Richardson @ 2015-09-15 9:01 UTC (permalink / raw)
To: Chao Zhu; +Cc: dev
On Tue, Sep 15, 2015 at 03:46:49PM +0800, Chao Zhu wrote:
>
> Any response of this patch?
Looks ok to me - pretty trivial change.
/Bruce
>
> -------- Forwarded Message --------
> Subject: [dpdk-dev] [PATCH] PPC: Fix NUMA node numbering on IBM POWER8 LE
> machine
> Date: Fri, 14 Aug 2015 20:19:48 +0800
> From: Chao Zhu <chaozhu@linux.vnet.ibm.com>
> To: dev@dpdk.org
>
>
>
> When Linux is running on bare metal, it gets the raw hardware
> information. On POWER8 little endian bare metal machine, the node number
> is not continuous. It will jump from 0 to other values, for example, it
> can be 0, 1, 16, 17. This patch modified the CONFIG_RTE_MAX_NUMA_NODES
> value to make dpdk work on POWER8 bare metal little endian machine.
>
> Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
> ---
> config/common_linuxapp | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/config/common_linuxapp b/config/common_linuxapp
> index 0de43d5..82a027e 100644
> --- a/config/common_linuxapp
> +++ b/config/common_linuxapp
> @@ -98,7 +98,7 @@ CONFIG_RTE_NEXT_ABI=y
> #
> CONFIG_RTE_LIBRTE_EAL=y
> CONFIG_RTE_MAX_LCORE=128
> -CONFIG_RTE_MAX_NUMA_NODES=8
> +CONFIG_RTE_MAX_NUMA_NODES=32
> CONFIG_RTE_MAX_MEMSEG=256
> CONFIG_RTE_MAX_MEMZONE=2560
> CONFIG_RTE_MAX_TAILQ=32
> --
> 1.7.1
>
>
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-dev] Fwd: [PATCH] PPC: Fix NUMA node numbering on IBM POWER8 LE machine
2015-09-15 9:01 ` Bruce Richardson
@ 2015-09-16 2:02 ` Chao Zhu
2015-09-16 8:09 ` David Marchand
0 siblings, 1 reply; 6+ messages in thread
From: Chao Zhu @ 2015-09-16 2:02 UTC (permalink / raw)
To: Bruce Richardson; +Cc: dev
Actually, without this change, DPDK can't work properly on PPC64 little
endian platform. It'll report "EAL: Not enough memory available!
Requested: xxxMB, available: xxxMB" such kind of error. But for users,
they don't know that changing the value of CONFIG_RTE_MAX_NUMA_NODES can
fix this. That why I invoke this patch.
On 2015/9/15 17:01, Bruce Richardson wrote:
> On Tue, Sep 15, 2015 at 03:46:49PM +0800, Chao Zhu wrote:
>> Any response of this patch?
> Looks ok to me - pretty trivial change.
>
> /Bruce
>> -------- Forwarded Message --------
>> Subject: [dpdk-dev] [PATCH] PPC: Fix NUMA node numbering on IBM POWER8 LE
>> machine
>> Date: Fri, 14 Aug 2015 20:19:48 +0800
>> From: Chao Zhu <chaozhu@linux.vnet.ibm.com>
>> To: dev@dpdk.org
>>
>>
>>
>> When Linux is running on bare metal, it gets the raw hardware
>> information. On POWER8 little endian bare metal machine, the node number
>> is not continuous. It will jump from 0 to other values, for example, it
>> can be 0, 1, 16, 17. This patch modified the CONFIG_RTE_MAX_NUMA_NODES
>> value to make dpdk work on POWER8 bare metal little endian machine.
>>
>> Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
>> ---
>> config/common_linuxapp | 2 +-
>> 1 files changed, 1 insertions(+), 1 deletions(-)
>>
>> diff --git a/config/common_linuxapp b/config/common_linuxapp
>> index 0de43d5..82a027e 100644
>> --- a/config/common_linuxapp
>> +++ b/config/common_linuxapp
>> @@ -98,7 +98,7 @@ CONFIG_RTE_NEXT_ABI=y
>> #
>> CONFIG_RTE_LIBRTE_EAL=y
>> CONFIG_RTE_MAX_LCORE=128
>> -CONFIG_RTE_MAX_NUMA_NODES=8
>> +CONFIG_RTE_MAX_NUMA_NODES=32
>> CONFIG_RTE_MAX_MEMSEG=256
>> CONFIG_RTE_MAX_MEMZONE=2560
>> CONFIG_RTE_MAX_TAILQ=32
>> --
>> 1.7.1
>>
>>
>>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-dev] Fwd: [PATCH] PPC: Fix NUMA node numbering on IBM POWER8 LE machine
2015-09-16 2:02 ` Chao Zhu
@ 2015-09-16 8:09 ` David Marchand
2015-09-17 8:56 ` Chao Zhu
0 siblings, 1 reply; 6+ messages in thread
From: David Marchand @ 2015-09-16 8:09 UTC (permalink / raw)
To: Chao Zhu; +Cc: dev
Hello Chao,
On Wed, Sep 16, 2015 at 4:02 AM, Chao Zhu <chaozhu@linux.vnet.ibm.com>
wrote:
> Actually, without this change, DPDK can't work properly on PPC64 little
> endian platform. It'll report "EAL: Not enough memory available! Requested:
> xxxMB, available: xxxMB" such kind of error. But for users, they don't know
> that changing the value of CONFIG_RTE_MAX_NUMA_NODES can fix this. That
> why I invoke this patch.
Sorry, I forgot to reply in this thread.
Well, to me, this is a workaround.
Yes it will work, but what happens if tomorrow we have some hardware that
tells us that it has some numa node which 60000 index ?
I think we need a rework in eal to proerly handle this, like I said in this
mail :
http://dpdk.org/ml/archives/dev/2015-September/023630.html
Do you think you can look into this ?
Thanks.
--
David Marchand
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-dev] Fwd: [PATCH] PPC: Fix NUMA node numbering on IBM POWER8 LE machine
2015-09-16 8:09 ` David Marchand
@ 2015-09-17 8:56 ` Chao Zhu
0 siblings, 0 replies; 6+ messages in thread
From: Chao Zhu @ 2015-09-17 8:56 UTC (permalink / raw)
To: David Marchand; +Cc: dev
David,
Let me take a look.
On 2015/9/16 16:09, David Marchand wrote:
> Hello Chao,
>
> On Wed, Sep 16, 2015 at 4:02 AM, Chao Zhu <chaozhu@linux.vnet.ibm.com
> <mailto:chaozhu@linux.vnet.ibm.com>> wrote:
>
> Actually, without this change, DPDK can't work properly on PPC64
> little endian platform. It'll report "EAL: Not enough memory
> available! Requested: xxxMB, available: xxxMB" such kind of error.
> But for users, they don't know that changing the value of
> CONFIG_RTE_MAX_NUMA_NODES can fix this. That why I invoke this patch.
>
>
> Sorry, I forgot to reply in this thread.
>
> Well, to me, this is a workaround.
> Yes it will work, but what happens if tomorrow we have some hardware
> that tells us that it has some numa node which 60000 index ?
>
> I think we need a rework in eal to proerly handle this, like I said in
> this mail :
> http://dpdk.org/ml/archives/dev/2015-September/023630.html
>
> Do you think you can look into this ?
>
>
> Thanks.
>
> --
> David Marchand
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2015-09-17 8:57 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-08-14 12:19 [dpdk-dev] [PATCH] PPC: Fix NUMA node numbering on IBM POWER8 LE machine Chao Zhu
2015-09-15 7:46 ` [dpdk-dev] Fwd: " Chao Zhu
2015-09-15 9:01 ` Bruce Richardson
2015-09-16 2:02 ` Chao Zhu
2015-09-16 8:09 ` David Marchand
2015-09-17 8:56 ` Chao Zhu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).