From: Jerin Jacob <jerin.jacob@caviumnetworks.com>
To: "Ananyev, Konstantin" <konstantin.ananyev@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [RFC ][PATCH] Introduce RTE_ARCH_STRONGLY_ORDERED_MEM_OPS configuration parameter
Date: Wed, 4 Nov 2015 09:03:31 +0530 [thread overview]
Message-ID: <20151104033329.GA3355@localhost.localdomain> (raw)
In-Reply-To: <2601191342CEEE43887BDE71AB97725836AB8FE8@irsmsx105.ger.corp.intel.com>
On Tue, Nov 03, 2015 at 05:12:21PM +0000, Ananyev, Konstantin wrote:
>
>
> > -----Original Message-----
> > From: Jerin Jacob [mailto:jerin.jacob@caviumnetworks.com]
> > Sent: Tuesday, November 03, 2015 4:53 PM
> > To: Ananyev, Konstantin
> > Cc: dev@dpdk.org
> > Subject: Re: [dpdk-dev] [RFC ][PATCH] Introduce RTE_ARCH_STRONGLY_ORDERED_MEM_OPS configuration parameter
> >
> > On Tue, Nov 03, 2015 at 04:28:00PM +0000, Ananyev, Konstantin wrote:
> > >
> > >
> > > > -----Original Message-----
> > > > From: Jerin Jacob [mailto:jerin.jacob@caviumnetworks.com]
> > > > Sent: Tuesday, November 03, 2015 4:19 PM
> > > > To: Ananyev, Konstantin
> > > > Cc: dev@dpdk.org
> > > > Subject: Re: [dpdk-dev] [RFC ][PATCH] Introduce RTE_ARCH_STRONGLY_ORDERED_MEM_OPS configuration parameter
> > > >
> > > > On Tue, Nov 03, 2015 at 03:57:24PM +0000, Ananyev, Konstantin wrote:
> > > > >
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Jerin Jacob
> > > > > > Sent: Tuesday, November 03, 2015 3:52 PM
> > > > > > To: dev@dpdk.org
> > > > > > Subject: [dpdk-dev] [RFC ][PATCH] Introduce RTE_ARCH_STRONGLY_ORDERED_MEM_OPS configuration parameter
> > > > > >
> > > > > > rte_ring implementation needs explicit memory barrier
> > > > > > in weakly ordered architecture like ARM unlike
> > > > > > strongly ordered architecture like X86
> > > > > >
> > > > > > Introducing RTE_ARCH_STRONGLY_ORDERED_MEM_OPS
> > > > > > configuration to abstract such dependency so that other
> > > > > > weakly ordered architectures can reuse this infrastructure.
> > > > >
> > > > > Looks a bit clumsy.
> > > > > Please try to follow this suggestion instead:
> > > > > http://dpdk.org/ml/archives/dev/2015-October/025505.html
> > > >
> > > > Make sense. Do we agree on a macro that is defined based upon
> > > > RTE_ARCH_STRONGLY_ORDERED_MEM_OP to remove clumsy #ifdef every where ?
> > >
> > > Why do we need that macro at all?
> > > Why just not have architecture specific macro as was discussed in that thread?
> > >
> > > So for intel somewhere inside
> > > lib/librte_eal/common/include/arch/x86/rte_atomic.h
> > >
> > > it would be:
> > >
> > > #define rte_smp_wmb() rte_compiler_barrier()
> > >
> > > For arm inside lib/librte_eal/common/include/arch/x86/rte_atomic.h
> > >
> > > #define rte_smp_wmb() rte_wmb()
> >
> > I am not sure about the other architecture but in armv8 device memory
> > (typically mapped through NIC PCIe BAR space) are strongly ordered.
> > So there is one more dimension to the equation(normal memory or device
> > memory).
> > IMO rte_smp_wmb() -> rte_wmb() mapping to deal with device memory may
> > not be correct on arm64 ?
>
> I thought we are talking now for multi-processor case no?
> For that would be: rte_smp_... set of macros.
> Similar to what linux guys have.
make sense. I will send out RFC patch for the defintion and
implementation of rte_smp_wb(),rte_smp_wmb(), and rte_smp_rmb()
Jerin
> Konstantin
>
> >
> > Thoughts ?
>
>
>
>
> >
> > >
> > > And so on.
> > >
> > > I think it was already an attempt (not finished) to do similar stuff for ppc:
> > > http://dpdk.org/dev/patchwork/patch/5884/
> > >
> > > Konstantin
> > >
> > > >
> > > > Jerin
> > > >
> > > > >
> > > > > Konstantin
> > > > >
> > > > > >
> > > > > > Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
> > > > > > ---
> > > > > > config/common_bsdapp | 5 +++++
> > > > > > config/common_linuxapp | 5 +++++
> > > > > > config/defconfig_arm64-armv8a-linuxapp-gcc | 1 +
> > > > > > config/defconfig_arm64-thunderx-linuxapp-gcc | 1 +
> > > > > > lib/librte_ring/rte_ring.h | 20 ++++++++++++++++++++
> > > > > > 5 files changed, 32 insertions(+)
> > > > > >
> > > > > > diff --git a/config/common_bsdapp b/config/common_bsdapp
> > > > > > index b37dcf4..c8d1f63 100644
> > > > > > --- a/config/common_bsdapp
> > > > > > +++ b/config/common_bsdapp
> > > > > > @@ -79,6 +79,11 @@ CONFIG_RTE_FORCE_INTRINSICS=n
> > > > > > CONFIG_RTE_ARCH_STRICT_ALIGN=n
> > > > > >
> > > > > > #
> > > > > > +# Machine has strongly-ordered memory operations on normal memory like x86
> > > > > > +#
> > > > > > +CONFIG_RTE_ARCH_STRONGLY_ORDERED_MEM_OPS=y
> > > > > > +
> > > > > > +#
> > > > > > # Compile to share library
> > > > > > #
> > > > > > CONFIG_RTE_BUILD_SHARED_LIB=n
> > > > > > diff --git a/config/common_linuxapp b/config/common_linuxapp
> > > > > > index 0de43d5..d040a74 100644
> > > > > > --- a/config/common_linuxapp
> > > > > > +++ b/config/common_linuxapp
> > > > > > @@ -79,6 +79,11 @@ CONFIG_RTE_FORCE_INTRINSICS=n
> > > > > > CONFIG_RTE_ARCH_STRICT_ALIGN=n
> > > > > >
> > > > > > #
> > > > > > +# Machine has strongly-ordered memory operations on normal memory like x86
> > > > > > +#
> > > > > > +CONFIG_RTE_ARCH_STRONGLY_ORDERED_MEM_OPS=y
> > > > > > +
> > > > > > +#
> > > > > > # Compile to share library
> > > > > > #
> > > > > > CONFIG_RTE_BUILD_SHARED_LIB=n
> > > > > > diff --git a/config/defconfig_arm64-armv8a-linuxapp-gcc b/config/defconfig_arm64-armv8a-linuxapp-gcc
> > > > > > index 6ea38a5..5289152 100644
> > > > > > --- a/config/defconfig_arm64-armv8a-linuxapp-gcc
> > > > > > +++ b/config/defconfig_arm64-armv8a-linuxapp-gcc
> > > > > > @@ -37,6 +37,7 @@ CONFIG_RTE_ARCH="arm64"
> > > > > > CONFIG_RTE_ARCH_ARM64=y
> > > > > > CONFIG_RTE_ARCH_64=y
> > > > > > CONFIG_RTE_ARCH_ARM_NEON=y
> > > > > > +CONFIG_RTE_ARCH_STRONGLY_ORDERED_MEM_OPS=n
> > > > > >
> > > > > > CONFIG_RTE_FORCE_INTRINSICS=y
> > > > > >
> > > > > > diff --git a/config/defconfig_arm64-thunderx-linuxapp-gcc b/config/defconfig_arm64-thunderx-linuxapp-gcc
> > > > > > index e8fccc7..79fa9e6 100644
> > > > > > --- a/config/defconfig_arm64-thunderx-linuxapp-gcc
> > > > > > +++ b/config/defconfig_arm64-thunderx-linuxapp-gcc
> > > > > > @@ -37,6 +37,7 @@ CONFIG_RTE_ARCH="arm64"
> > > > > > CONFIG_RTE_ARCH_ARM64=y
> > > > > > CONFIG_RTE_ARCH_64=y
> > > > > > CONFIG_RTE_ARCH_ARM_NEON=y
> > > > > > +CONFIG_RTE_ARCH_STRONGLY_ORDERED_MEM_OPS=n
> > > > > >
> > > > > > CONFIG_RTE_FORCE_INTRINSICS=y
> > > > > >
> > > > > > diff --git a/lib/librte_ring/rte_ring.h b/lib/librte_ring/rte_ring.h
> > > > > > index af68888..1ccd186 100644
> > > > > > --- a/lib/librte_ring/rte_ring.h
> > > > > > +++ b/lib/librte_ring/rte_ring.h
> > > > > > @@ -457,7 +457,12 @@ __rte_ring_mp_do_enqueue(struct rte_ring *r, void * const *obj_table,
> > > > > >
> > > > > > /* write entries in ring */
> > > > > > ENQUEUE_PTRS();
> > > > > > +
> > > > > > +#ifdef RTE_ARCH_STRONGLY_ORDERED_MEM_OPS
> > > > > > rte_compiler_barrier();
> > > > > > +#else
> > > > > > + rte_wmb();
> > > > > > +#endif
> > > > > >
> > > > > > /* if we exceed the watermark */
> > > > > > if (unlikely(((mask + 1) - free_entries + n) > r->prod.watermark)) {
> > > > > > @@ -552,7 +557,12 @@ __rte_ring_sp_do_enqueue(struct rte_ring *r, void * const *obj_table,
> > > > > >
> > > > > > /* write entries in ring */
> > > > > > ENQUEUE_PTRS();
> > > > > > +
> > > > > > +#ifdef RTE_ARCH_STRONGLY_ORDERED_MEM_OPS
> > > > > > rte_compiler_barrier();
> > > > > > +#else
> > > > > > + rte_wmb();
> > > > > > +#endif
> > > > > >
> > > > > > /* if we exceed the watermark */
> > > > > > if (unlikely(((mask + 1) - free_entries + n) > r->prod.watermark)) {
> > > > > > @@ -643,7 +653,12 @@ __rte_ring_mc_do_dequeue(struct rte_ring *r, void **obj_table,
> > > > > >
> > > > > > /* copy in table */
> > > > > > DEQUEUE_PTRS();
> > > > > > +
> > > > > > +#ifdef RTE_ARCH_STRONGLY_ORDERED_MEM_OPS
> > > > > > rte_compiler_barrier();
> > > > > > +#else
> > > > > > + rte_rmb();
> > > > > > +#endif
> > > > > >
> > > > > > /*
> > > > > > * If there are other dequeues in progress that preceded us,
> > > > > > @@ -727,7 +742,12 @@ __rte_ring_sc_do_dequeue(struct rte_ring *r, void **obj_table,
> > > > > >
> > > > > > /* copy in table */
> > > > > > DEQUEUE_PTRS();
> > > > > > +
> > > > > > +#ifdef RTE_ARCH_STRONGLY_ORDERED_MEM_OPS
> > > > > > rte_compiler_barrier();
> > > > > > +#else
> > > > > > + rte_rmb();
> > > > > > +#endif
> > > > > >
> > > > > > __RING_STAT_ADD(r, deq_success, n);
> > > > > > r->cons.tail = cons_next;
> > > > > > --
> > > > > > 2.1.0
> > > > >
prev parent reply other threads:[~2015-11-04 3:34 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-03 15:52 Jerin Jacob
2015-11-03 15:57 ` simon barber
2015-11-03 15:57 ` Ananyev, Konstantin
2015-11-03 16:18 ` Jerin Jacob
2015-11-03 16:24 ` Richardson, Bruce
2015-11-03 16:28 ` Ananyev, Konstantin
2015-11-03 16:53 ` Jerin Jacob
2015-11-03 17:02 ` Richardson, Bruce
2015-11-03 17:12 ` Ananyev, Konstantin
2015-11-04 3:33 ` Jerin Jacob [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151104033329.GA3355@localhost.localdomain \
--to=jerin.jacob@caviumnetworks.com \
--cc=dev@dpdk.org \
--cc=konstantin.ananyev@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).