* [dpdk-dev] [v2 14/15] bnxt: Update the HWRM filter related structures to version 1.5.1
@ 2016-09-26 16:19 Ajit Khaparde
0 siblings, 0 replies; only message in thread
From: Ajit Khaparde @ 2016-09-26 16:19 UTC (permalink / raw)
To: dev
Update the PMD to use packet filtering related structures as per the
1.5.1 version of the HWRM API. Most of the changes in the patch are
white spaces and rearrangement of the lines - a onetime change owing to
the usage of a different autogenerated file.
Structures being updated:
hwrm_cfa_l2_filter_cfg_input, hwrm_cfa_l2_filter_cfg_output,
hwrm_cfa_l2_set_rx_mask_input, hwrm_cfa_l2_set_rx_mask_output,
hwrm_cfa_l2_filter_alloc_input, hwrm_cfa_l2_filter_alloc_output,
hwrm_cfa_l2_filter_free_input, hwrm_cfa_l2_filter_free_output
v1->v2: split into smaller patches for easier review.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
drivers/net/bnxt/hsi_struct_def_dpdk.h | 840 ++++++++++++++++++---------------
1 file changed, 448 insertions(+), 392 deletions(-)
diff --git a/drivers/net/bnxt/hsi_struct_def_dpdk.h b/drivers/net/bnxt/hsi_struct_def_dpdk.h
index bec77e4..d11c549 100644
--- a/drivers/net/bnxt/hsi_struct_def_dpdk.h
+++ b/drivers/net/bnxt/hsi_struct_def_dpdk.h
@@ -5100,372 +5100,306 @@ struct hwrm_ring_grp_free_output {
* other things which then allows the ASIC to direct the incoming traffic
* to an appropriate VNIC or Rx ring.
*/
-
/* Input (96 bytes) */
struct hwrm_cfa_l2_filter_alloc_input {
- /*
- * This value indicates what type of request this is. The format for the
- * rest of the command is determined by this field.
- */
uint16_t req_type;
-
/*
- * This value indicates the what completion ring the request will be
- * optionally completed on. If the value is -1, then no CR completion
- * will be generated. Any other value must be a valid CR ring_id value
- * for this function.
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
-
- /* This value indicates the command sequence number. */
- uint16_t seq_id;
-
/*
- * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
- * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
*/
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
uint16_t target_id;
-
/*
- * This is the host address where the response will be written when the
- * request is complete. This area must be 16B aligned and must be
- * cleared to zero before the request is made.
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
*/
uint64_t resp_addr;
-
/*
- * Enumeration denoting the RX, TX type of the resource. This
- * enumeration is used for resources that are similar for both TX and RX
- * paths of the chip.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH \
- UINT32_C(0x1)
- /* tx path */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_TX \
- (UINT32_C(0x0) << 0)
- /* rx path */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX \
- (UINT32_C(0x1) << 0)
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_LAST \
- HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX
- /*
- * Setting of this flag indicates the applicability to the loopback
- * path.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK \
- UINT32_C(0x2)
- /*
- * Setting of this flag indicates drop action. If this flag is not set,
- * then it should be considered accept action.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_DROP \
- UINT32_C(0x4)
- /*
- * If this flag is set, all t_l2_* fields are invalid and they should
- * not be specified. If this flag is set, then l2_* fields refer to
- * fields of outermost L2 header.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_OUTERMOST \
- UINT32_C(0x8)
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
uint32_t flags;
-
+ /*
+ * Enumeration denoting the RX, TX type of the resource. This
+ * enumeration is used for resources that are similar for both
+ * TX and RX paths of the chip.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_TX (UINT32_C(0x0) << 0)
+ /* rx path */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX (UINT32_C(0x1) << 0)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_LAST \
+ CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX
+ /*
+ * Setting of this flag indicates the applicability to the
+ * loopback path.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK UINT32_C(0x2)
+ /*
+ * Setting of this flag indicates drop action. If this flag is
+ * not set, then it should be considered accept action.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_DROP UINT32_C(0x4)
+ /*
+ * If this flag is set, all t_l2_* fields are invalid and they
+ * should not be specified. If this flag is set, then l2_*
+ * fields refer to fields of outermost L2 header.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_OUTERMOST UINT32_C(0x8)
+ uint32_t enables;
/* This bit must be '1' for the l2_addr field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR \
- UINT32_C(0x1)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR UINT32_C(0x1)
/* This bit must be '1' for the l2_addr_mask field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR_MASK \
- UINT32_C(0x2)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR_MASK UINT32_C(0x2)
/* This bit must be '1' for the l2_ovlan field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN \
- UINT32_C(0x4)
- /* This bit must be '1' for the l2_ovlan_mask field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN_MASK \
- UINT32_C(0x8)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the l2_ovlan_mask field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN_MASK UINT32_C(0x8)
/* This bit must be '1' for the l2_ivlan field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN \
- UINT32_C(0x10)
- /* This bit must be '1' for the l2_ivlan_mask field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN_MASK \
- UINT32_C(0x20)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the l2_ivlan_mask field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN_MASK UINT32_C(0x20)
/* This bit must be '1' for the t_l2_addr field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR \
- UINT32_C(0x40)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR UINT32_C(0x40)
/*
- * This bit must be '1' for the t_l2_addr_mask field to be configured.
+ * This bit must be '1' for the t_l2_addr_mask field to be
+ * configured.
*/
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR_MASK \
- UINT32_C(0x80)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR_MASK UINT32_C(0x80)
/* This bit must be '1' for the t_l2_ovlan field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN \
- UINT32_C(0x100)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN UINT32_C(0x100)
/*
- * This bit must be '1' for the t_l2_ovlan_mask field to be configured.
+ * This bit must be '1' for the t_l2_ovlan_mask field to be
+ * configured.
*/
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN_MASK \
- UINT32_C(0x200)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN_MASK UINT32_C(0x200)
/* This bit must be '1' for the t_l2_ivlan field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN \
- UINT32_C(0x400)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN UINT32_C(0x400)
/*
- * This bit must be '1' for the t_l2_ivlan_mask field to be configured.
+ * This bit must be '1' for the t_l2_ivlan_mask field to be
+ * configured.
*/
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN_MASK \
- UINT32_C(0x800)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN_MASK UINT32_C(0x800)
/* This bit must be '1' for the src_type field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_TYPE \
- UINT32_C(0x1000)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_TYPE UINT32_C(0x1000)
/* This bit must be '1' for the src_id field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_ID \
- UINT32_C(0x2000)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_ID UINT32_C(0x2000)
/* This bit must be '1' for the tunnel_type field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \
- UINT32_C(0x4000)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE UINT32_C(0x4000)
/* This bit must be '1' for the dst_id field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_DST_ID \
- UINT32_C(0x8000)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_DST_ID UINT32_C(0x8000)
/*
- * This bit must be '1' for the mirror_vnic_id field to be configured.
+ * This bit must be '1' for the mirror_vnic_id field to be
+ * configured.
*/
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \
- UINT32_C(0x10000)
- uint32_t enables;
-
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID UINT32_C(0x10000)
+ uint8_t l2_addr[6];
/*
- * This value sets the match value for the L2 MAC address. Destination
- * MAC address for RX path. Source MAC address for TX path.
+ * This value sets the match value for the L2 MAC address.
+ * Destination MAC address for RX path. Source MAC address for
+ * TX path.
*/
- uint8_t l2_addr[6];
-
uint8_t unused_0;
uint8_t unused_1;
-
+ uint8_t l2_addr_mask[6];
/*
- * This value sets the mask value for the L2 address. A value of 0 will
- * mask the corresponding bit from compare.
+ * This value sets the mask value for the L2 address. A value of
+ * 0 will mask the corresponding bit from compare.
*/
- uint8_t l2_addr_mask[6];
-
- /* This value sets VLAN ID value for outer VLAN. */
uint16_t l2_ovlan;
-
+ /* This value sets VLAN ID value for outer VLAN. */
+ uint16_t l2_ovlan_mask;
/*
- * This value sets the mask value for the ovlan id. A value of 0 will
- * mask the corresponding bit from compare.
+ * This value sets the mask value for the ovlan id. A value of 0
+ * will mask the corresponding bit from compare.
*/
- uint16_t l2_ovlan_mask;
-
- /* This value sets VLAN ID value for inner VLAN. */
uint16_t l2_ivlan;
-
+ /* This value sets VLAN ID value for inner VLAN. */
+ uint16_t l2_ivlan_mask;
/*
- * This value sets the mask value for the ivlan id. A value of 0 will
- * mask the corresponding bit from compare.
+ * This value sets the mask value for the ivlan id. A value of 0
+ * will mask the corresponding bit from compare.
*/
- uint16_t l2_ivlan_mask;
-
uint8_t unused_2;
uint8_t unused_3;
-
+ uint8_t t_l2_addr[6];
/*
- * This value sets the match value for the tunnel L2 MAC address.
- * Destination MAC address for RX path. Source MAC address for TX path.
+ * This value sets the match value for the tunnel L2 MAC
+ * address. Destination MAC address for RX path. Source MAC
+ * address for TX path.
*/
- uint8_t t_l2_addr[6];
-
uint8_t unused_4;
uint8_t unused_5;
-
+ uint8_t t_l2_addr_mask[6];
/*
- * This value sets the mask value for the tunnel L2 address. A value of
- * 0 will mask the corresponding bit from compare.
+ * This value sets the mask value for the tunnel L2 address. A
+ * value of 0 will mask the corresponding bit from compare.
*/
- uint8_t t_l2_addr_mask[6];
-
- /* This value sets VLAN ID value for tunnel outer VLAN. */
uint16_t t_l2_ovlan;
-
+ /* This value sets VLAN ID value for tunnel outer VLAN. */
+ uint16_t t_l2_ovlan_mask;
/*
- * This value sets the mask value for the tunnel ovlan id. A value of 0
- * will mask the corresponding bit from compare.
+ * This value sets the mask value for the tunnel ovlan id. A
+ * value of 0 will mask the corresponding bit from compare.
*/
- uint16_t t_l2_ovlan_mask;
-
- /* This value sets VLAN ID value for tunnel inner VLAN. */
uint16_t t_l2_ivlan;
-
+ /* This value sets VLAN ID value for tunnel inner VLAN. */
+ uint16_t t_l2_ivlan_mask;
/*
- * This value sets the mask value for the tunnel ivlan id. A value of 0
- * will mask the corresponding bit from compare.
+ * This value sets the mask value for the tunnel ivlan id. A
+ * value of 0 will mask the corresponding bit from compare.
*/
- uint16_t t_l2_ivlan_mask;
-
- /* This value identifies the type of source of the packet. */
- /* Network port */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_NPORT \
- (UINT32_C(0x0) << 0)
- /* Physical function */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_PF \
- (UINT32_C(0x1) << 0)
- /* Virtual function */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VF \
- (UINT32_C(0x2) << 0)
- /* Virtual NIC of a function */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VNIC \
- (UINT32_C(0x3) << 0)
- /* Embedded processor for CFA management */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_KONG \
- (UINT32_C(0x4) << 0)
- /* Embedded processor for OOB management */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_APE \
- (UINT32_C(0x5) << 0)
- /* Embedded processor for RoCE */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_BONO \
- (UINT32_C(0x6) << 0)
- /* Embedded processor for network proxy functions */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_TANG \
- (UINT32_C(0x7) << 0)
uint8_t src_type;
-
+ /* This value identifies the type of source of the packet. */
+ /* Network port */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_NPORT UINT32_C(0x0)
+ /* Physical function */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_PF UINT32_C(0x1)
+ /* Virtual function */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VF UINT32_C(0x2)
+ /* Virtual NIC of a function */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VNIC UINT32_C(0x3)
+ /* Embedded processor for CFA management */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_KONG UINT32_C(0x4)
+ /* Embedded processor for OOB management */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_APE UINT32_C(0x5)
+ /* Embedded processor for RoCE */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_BONO UINT32_C(0x6)
+ /* Embedded processor for network proxy functions */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_TANG UINT32_C(0x7)
uint8_t unused_6;
+ uint32_t src_id;
/*
- * This value is the id of the source. For a network port, it represents
- * port_id. For a physical function, it represents fid. For a virtual
- * function, it represents vf_id. For a vnic, it represents vnic_id. For
- * embedded processors, this id is not valid. Notes: 1. The function ID
- * is implied if it src_id is not provided for a src_type that is either
+ * This value is the id of the source. For a network port, it
+ * represents port_id. For a physical function, it represents
+ * fid. For a virtual function, it represents vf_id. For a vnic,
+ * it represents vnic_id. For embedded processors, this id is
+ * not valid. Notes: 1. The function ID is implied if it src_id
+ * is not provided for a src_type that is either
*/
- uint32_t src_id;
-
- /* Tunnel Type. */
- /* Non-tunnel */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
- (UINT32_C(0x0) << 0)
- /* Virtual eXtensible Local Area Network (VXLAN) */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
- (UINT32_C(0x1) << 0)
- /*
- * Network Virtualization Generic Routing Encapsulation (NVGRE)
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \
- (UINT32_C(0x2) << 0)
- /*
- * Generic Routing Encapsulation (GRE) inside Ethernet payload
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \
- (UINT32_C(0x3) << 0)
- /* IP in IP */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP \
- (UINT32_C(0x4) << 0)
- /* Generic Network Virtualization Encapsulation (Geneve) */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
- (UINT32_C(0x5) << 0)
- /* Multi-Protocol Lable Switching (MPLS) */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
- (UINT32_C(0x6) << 0)
- /* Stateless Transport Tunnel (STT) */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT \
- (UINT32_C(0x7) << 0)
- /*
- * Generic Routing Encapsulation (GRE) inside IP datagram
- * payload
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \
- (UINT32_C(0x8) << 0)
- /* Any tunneled traffic */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
- (UINT32_C(0xff) << 0)
uint8_t tunnel_type;
-
+ /* Tunnel Type. */
+ /* Non-tunnel */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL UINT32_C(0x0)
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN UINT32_C(0x1)
+ /*
+ * Network Virtualization Generic Routing
+ * Encapsulation (NVGRE)
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE UINT32_C(0x2)
+ /*
+ * Generic Routing Encapsulation (GRE) inside
+ * Ethernet payload
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE UINT32_C(0x3)
+ /* IP in IP */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP UINT32_C(0x4)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE UINT32_C(0x5)
+ /* Multi-Protocol Lable Switching (MPLS) */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS UINT32_C(0x6)
+ /* Stateless Transport Tunnel (STT) */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT UINT32_C(0x7)
+ /*
+ * Generic Routing Encapsulation (GRE) inside IP
+ * datagram payload
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE UINT32_C(0x8)
+ /* Any tunneled traffic */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL UINT32_C(0xff)
uint8_t unused_7;
-
+ uint16_t dst_id;
/*
* If set, this value shall represent the Logical VNIC ID of the
* destination VNIC for the RX path and network port id of the
* destination port for the TX path.
*/
- uint16_t dst_id;
-
- /* Logical VNIC ID of the VNIC where traffic is mirrored. */
uint16_t mirror_vnic_id;
-
- /*
- * This hint is provided to help in placing the filter in the filter
- * table.
- */
- /* No preference */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_NO_PREFER \
- (UINT32_C(0x0) << 0)
- /* Above the given filter */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_ABOVE_FILTER \
- (UINT32_C(0x1) << 0)
- /* Below the given filter */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_BELOW_FILTER \
- (UINT32_C(0x2) << 0)
- /* As high as possible */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MAX \
- (UINT32_C(0x3) << 0)
- /* As low as possible */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MIN \
- (UINT32_C(0x4) << 0)
+ /* Logical VNIC ID of the VNIC where traffic is mirrored. */
uint8_t pri_hint;
-
+ /*
+ * This hint is provided to help in placing the filter in the
+ * filter table.
+ */
+ /* No preference */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_NO_PREFER UINT32_C(0x0)
+ /* Above the given filter */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_ABOVE_FILTER UINT32_C(0x1)
+ /* Below the given filter */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_BELOW_FILTER UINT32_C(0x2)
+ /* As high as possible */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MAX UINT32_C(0x3)
+ /* As low as possible */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MIN UINT32_C(0x4)
uint8_t unused_8;
uint32_t unused_9;
-
+ uint64_t l2_filter_id_hint;
/*
- * This is the ID of the filter that goes along with the pri_hint. This
- * field is valid only for the following values. 1 - Above the given
- * filter 2 - Below the given filter
+ * This is the ID of the filter that goes along with the
+ * pri_hint. This field is valid only for the following values.
+ * 1 - Above the given filter 2 - Below the given filter
*/
- uint64_t l2_filter_id_hint;
} __attribute__((packed));
/* Output (24 bytes) */
struct hwrm_cfa_l2_filter_alloc_output {
+ uint16_t error_code;
/*
- * Pass/Fail or error type Note: receiver to verify the in parameters,
- * and fail the call with an error when appropriate
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
*/
- uint16_t error_code;
-
- /* This field returns the type of original request. */
uint16_t req_type;
-
- /* This field provides original sequence number of the command. */
+ /* This field returns the type of original request. */
uint16_t seq_id;
-
- /*
- * This field is the length of the response in bytes. The last byte of
- * the response is a valid flag that will read as '1' when the command
- * has been completely written to memory.
- */
+ /* This field provides original sequence number of the command. */
uint16_t resp_len;
-
/*
- * This value identifies a set of CFA data structures used for an L2
- * context.
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
*/
uint64_t l2_filter_id;
-
/*
- * This is the ID of the flow associated with this filter. This value
- * shall be used to match and associate the flow identifier returned in
- * completion records. A value of 0xFFFFFFFF shall indicate no flow id.
+ * This value identifies a set of CFA data structures used for
+ * an L2 context.
*/
uint32_t flow_id;
-
+ /*
+ * This is the ID of the flow associated with this filter. This
+ * value shall be used to match and associate the flow
+ * identifier returned in completion records. A value of
+ * 0xFFFFFFFF shall indicate no flow id.
+ */
uint8_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
-
+ uint8_t valid;
/*
- * This field is used in Output records to indicate that the output is
- * completely written to RAM. This field should be read as '1' to
- * indicate that the output has been completely written. When writing a
- * command completion or response to an internal processor, the order of
- * writes has to be such that this field is written last.
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
*/
- uint8_t valid;
} __attribute__((packed));
/* hwrm_cfa_l2_filter_free */
@@ -5473,215 +5407,337 @@ struct hwrm_cfa_l2_filter_alloc_output {
* Description: Free a L2 filter. The HWRM shall free all associated filter
* resources with the L2 filter.
*/
-
/* Input (24 bytes) */
struct hwrm_cfa_l2_filter_free_input {
- /*
- * This value indicates what type of request this is. The format for the
- * rest of the command is determined by this field.
- */
uint16_t req_type;
-
/*
- * This value indicates the what completion ring the request will be
- * optionally completed on. If the value is -1, then no CR completion
- * will be generated. Any other value must be a valid CR ring_id value
- * for this function.
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
-
- /* This value indicates the command sequence number. */
- uint16_t seq_id;
-
/*
- * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
- * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
*/
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
uint16_t target_id;
-
/*
- * This is the host address where the response will be written when the
- * request is complete. This area must be 16B aligned and must be
- * cleared to zero before the request is made.
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
*/
uint64_t resp_addr;
-
/*
- * This value identifies a set of CFA data structures used for an L2
- * context.
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
*/
uint64_t l2_filter_id;
+ /*
+ * This value identifies a set of CFA data structures used for
+ * an L2 context.
+ */
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_cfa_l2_filter_free_output {
+ uint16_t error_code;
/*
- * Pass/Fail or error type Note: receiver to verify the in parameters,
- * and fail the call with an error when appropriate
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
*/
- uint16_t error_code;
-
- /* This field returns the type of original request. */
uint16_t req_type;
-
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
/* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_cfa_l2_filter_cfg */
+/* Description: Change the configuration of an existing L2 filter */
+/* Input (40 bytes) */
+struct hwrm_cfa_l2_filter_cfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint32_t flags;
+ /*
+ * Enumeration denoting the RX, TX type of the resource. This
+ * enumeration is used for resources that are similar for both
+ * TX and RX paths of the chip.
+ */
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_TX (UINT32_C(0x0) << 0)
+ /* rx path */
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_RX (UINT32_C(0x1) << 0)
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_LAST \
+ CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_RX
+ /*
+ * Setting of this flag indicates drop action. If this flag is
+ * not set, then it should be considered accept action.
+ */
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_DROP UINT32_C(0x2)
+ uint32_t enables;
+ /* This bit must be '1' for the dst_id field to be configured. */
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_ENABLES_DST_ID UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the new_mirror_vnic_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_ENABLES_NEW_MIRROR_VNIC_ID UINT32_C(0x2)
+ uint64_t l2_filter_id;
+ /*
+ * This value identifies a set of CFA data structures used for
+ * an L2 context.
+ */
+ uint32_t dst_id;
+ /*
+ * If set, this value shall represent the Logical VNIC ID of the
+ * destination VNIC for the RX path and network port id of the
+ * destination port for the TX path.
+ */
+ uint32_t new_mirror_vnic_id;
+ /* New Logical VNIC ID of the VNIC where traffic is mirrored. */
+} __attribute__((packed));
+/* Output (16 bytes) */
+struct hwrm_cfa_l2_filter_cfg_output {
+ uint16_t error_code;
/*
- * This field is the length of the response in bytes. The last byte of
- * the response is a valid flag that will read as '1' when the command
- * has been completely written to memory.
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
*/
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
uint16_t resp_len;
-
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
-
+ uint8_t valid;
/*
- * This field is used in Output records to indicate that the output is
- * completely written to RAM. This field should be read as '1' to
- * indicate that the output has been completely written. When writing a
- * command completion or response to an internal processor, the order of
- * writes has to be such that this field is written last.
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
*/
- uint8_t valid;
} __attribute__((packed));
/* hwrm_cfa_l2_set_rx_mask */
/* Description: This command will set rx mask of the function. */
-
-/* Input (40 bytes) */
+/* Input (56 bytes) */
struct hwrm_cfa_l2_set_rx_mask_input {
- /*
- * This value indicates what type of request this is. The format for the
- * rest of the command is determined by this field.
- */
uint16_t req_type;
-
/*
- * This value indicates the what completion ring the request will be
- * optionally completed on. If the value is -1, then no CR completion
- * will be generated. Any other value must be a valid CR ring_id value
- * for this function.
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
-
- /* This value indicates the command sequence number. */
- uint16_t seq_id;
-
/*
- * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
- * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
*/
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
uint16_t target_id;
-
/*
- * This is the host address where the response will be written when the
- * request is complete. This area must be 16B aligned and must be
- * cleared to zero before the request is made.
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
*/
uint64_t resp_addr;
-
- /* VNIC ID */
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
uint32_t vnic_id;
-
+ /* VNIC ID */
+ uint32_t mask;
/* Reserved for future use. */
#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_RESERVED UINT32_C(0x1)
/*
- * When this bit is '1', the function is requested to accept multi-cast
- * packets specified by the multicast addr table.
+ * When this bit is '1', the function is requested to accept
+ * multi-cast packets specified by the multicast addr table.
*/
#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_MCAST UINT32_C(0x2)
/*
- * When this bit is '1', the function is requested to accept all multi-
- * cast packets.
+ * When this bit is '1', the function is requested to accept all
+ * multi-cast packets.
*/
#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ALL_MCAST UINT32_C(0x4)
/*
- * When this bit is '1', the function is requested to accept broadcast
- * packets.
+ * When this bit is '1', the function is requested to accept
+ * broadcast packets.
*/
#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_BCAST UINT32_C(0x8)
/*
- * When this bit is '1', the function is requested to be put in the
- * promiscuous mode. The HWRM should accept any function to set up
- * promiscuous mode. The HWRM shall follow the semantics below for the
- * promiscuous mode support. # When partitioning is not enabled on a
- * port (i.e. single PF on the port), then the PF shall be allowed to be
- * in the promiscuous mode. When the PF is in the promiscuous mode, then
- * it shall receive all host bound traffic on that port. # When
- * partitioning is enabled on a port (i.e. multiple PFs per port) and a
- * PF on that port is in the promiscuous mode, then the PF receives all
- * traffic within that partition as identified by a unique identifier
- * for the PF (e.g. S-Tag). If a unique outer VLAN for the PF is
- * specified, then the setting of promiscuous mode on that PF shall
- * result in the PF receiving all host bound traffic with matching outer
- * VLAN. # A VF shall can be set in the promiscuous mode. In the
- * promiscuous mode, the VF does not receive any traffic unless a unique
- * outer VLAN for the VF is specified. If a unique outer VLAN for the VF
- * is specified, then the setting of promiscuous mode on that VF shall
- * result in the VF receiving all host bound traffic with the matching
- * outer VLAN. # The HWRM shall allow the setting of promiscuous mode on
- * a function independently from the promiscuous mode settings on other
- * functions.
+ * When this bit is '1', the function is requested to be put in
+ * the promiscuous mode. The HWRM should accept any function to
+ * set up promiscuous mode. The HWRM shall follow the semantics
+ * below for the promiscuous mode support. # When partitioning
+ * is not enabled on a port (i.e. single PF on the port), then
+ * the PF shall be allowed to be in the promiscuous mode. When
+ * the PF is in the promiscuous mode, then it shall receive all
+ * host bound traffic on that port. # When partitioning is
+ * enabled on a port (i.e. multiple PFs per port) and a PF on
+ * that port is in the promiscuous mode, then the PF receives
+ * all traffic within that partition as identified by a unique
+ * identifier for the PF (e.g. S-Tag). If a unique outer VLAN
+ * for the PF is specified, then the setting of promiscuous mode
+ * on that PF shall result in the PF receiving all host bound
+ * traffic with matching outer VLAN. # A VF shall can be set in
+ * the promiscuous mode. In the promiscuous mode, the VF does
+ * not receive any traffic unless a unique outer VLAN for the VF
+ * is specified. If a unique outer VLAN for the VF is specified,
+ * then the setting of promiscuous mode on that VF shall result
+ * in the VF receiving all host bound traffic with the matching
+ * outer VLAN. # The HWRM shall allow the setting of promiscuous
+ * mode on a function independently from the promiscuous mode
+ * settings on other functions.
*/
#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_PROMISCUOUS UINT32_C(0x10)
/*
- * If this flag is set, the corresponding RX filters shall be set up to
- * cover multicast/broadcast filters for the outermost Layer 2
- * destination MAC address field.
+ * If this flag is set, the corresponding RX filters shall be
+ * set up to cover multicast/broadcast filters for the outermost
+ * Layer 2 destination MAC address field.
*/
#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_OUTERMOST UINT32_C(0x20)
- uint32_t mask;
-
- /* This is the address for mcast address tbl. */
- uint64_t mc_tbl_addr;
-
/*
- * This value indicates how many entries in mc_tbl are valid. Each entry
- * is 6 bytes.
+ * If this flag is set, the corresponding RX filters shall be
+ * set up to cover multicast/broadcast filters for the VLAN-
+ * tagged packets that match the TPID and VID fields of VLAN
+ * tags in the VLAN tag table specified in this command.
+ */
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_VLANONLY UINT32_C(0x40)
+ /*
+ * If this flag is set, the corresponding RX filters shall be
+ * set up to cover multicast/broadcast filters for non-VLAN
+ * tagged packets and VLAN-tagged packets that match the TPID
+ * and VID fields of VLAN tags in the VLAN tag table specified
+ * in this command.
*/
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_VLAN_NONVLAN UINT32_C(0x80)
+ /*
+ * If this flag is set, the corresponding RX filters shall be
+ * set up to cover multicast/broadcast filters for non-VLAN
+ * tagged packets and VLAN-tagged packets matching any VLAN tag.
+ * If this flag is set, then the HWRM shall ignore VLAN tags
+ * specified in vlan_tag_tbl. If none of vlanonly, vlan_nonvlan,
+ * and anyvlan_nonvlan flags is set, then the HWRM shall ignore
+ * VLAN tags specified in vlan_tag_tbl. The HWRM client shall
+ * set at most one flag out of vlanonly, vlan_nonvlan, and
+ * anyvlan_nonvlan.
+ */
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ANYVLAN_NONVLAN UINT32_C(0x100)
+ uint64_t mc_tbl_addr;
+ /* This is the address for mcast address tbl. */
uint32_t num_mc_entries;
-
+ /*
+ * This value indicates how many entries in mc_tbl are valid.
+ * Each entry is 6 bytes.
+ */
uint32_t unused_0;
+ uint64_t vlan_tag_tbl_addr;
+ /*
+ * This is the address for VLAN tag table. Each VLAN entry in
+ * the table is 4 bytes of a VLAN tag including TPID, PCP, DEI,
+ * and VID fields in network byte order.
+ */
+ uint32_t num_vlan_tags;
+ /*
+ * This value indicates how many entries in vlan_tag_tbl are
+ * valid. Each entry is 4 bytes.
+ */
+ uint32_t unused_1;
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_cfa_l2_set_rx_mask_output {
+ uint16_t error_code;
/*
- * Pass/Fail or error type Note: receiver to verify the in parameters,
- * and fail the call with an error when appropriate
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
*/
- uint16_t error_code;
-
- /* This field returns the type of original request. */
uint16_t req_type;
-
- /* This field provides original sequence number of the command. */
+ /* This field returns the type of original request. */
uint16_t seq_id;
-
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
/*
- * This field is the length of the response in bytes. The last byte of
- * the response is a valid flag that will read as '1' when the command
- * has been completely written to memory.
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
*/
- uint16_t resp_len;
-
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
-
+ uint8_t valid;
/*
- * This field is used in Output records to indicate that the output is
- * completely written to RAM. This field should be read as '1' to
- * indicate that the output has been completely written. When writing a
- * command completion or response to an internal processor, the order of
- * writes has to be such that this field is written last.
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
*/
- uint8_t valid;
} __attribute__((packed));
/* hwrm_exec_fwd_resp */
--
2.4.3
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2016-09-26 16:20 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-09-26 16:19 [dpdk-dev] [v2 14/15] bnxt: Update the HWRM filter related structures to version 1.5.1 Ajit Khaparde
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).