[dpdk-dev] Regarding phys port id in mellanox NIC

[dpdk-dev] Regarding phys port id in mellanox NIC

[Ramakrishnan, Kuralamudhan]

Hello,

I have a question regarding the phys port id in mellanox NIC, is this feature deprecated in the latest mlnx-en-dpdk driver ?

Issue:

I am working on the Ethernet controller: Mellanox Technologies MT27520 Family [ConnectX-3 Pro] NIC.
I used to read the /sys/class/net/enp6s0/phys_port_id file, this will give me the value as 248a070300728f70 for port 1 and 248a070300728f71 for port 2.
The modinfo details before installing the mlnx-en-dpdk is as follows

# modinfo mlx4_en
filename: /lib/modules/4.4.0-59-generic/kernel/drivers/net/ethernet/mellanox/mlx4/mlx4_en.ko
version:        2.2-1 (Feb 2014)
license:        Dual BSD/GPL
description:    Mellanox ConnectX HCA Ethernet driver
author:         Liran Liss, Yevgeny Petrilin
srcversion:     CF3245DD50A90F3D536D0A7
depends: mlx4_core,ptp,vxlan
intree:         Y
vermagic:       4.4.0-59-generic SMP mod_unload modversions
parm: udp_rss:Enable RSS for incoming UDP traffic or disabled (0) (uint)
parm: pfctx:Priority based Flow Control policy on TX[7:0]. Per priority bit mask (uint)
parm: pfcrx:Priority based Flow Control policy on RX[7:0]. Per priority bit mask (uint)
parm: inline_thold:Threshold for using inline data (range: 17-104, default: 104) (uint)

After that that I installed the mlnx-en-dpdk drivers as follows.

Download and extract Mellanox divers:
# cd ~/packages
# wget http://www.mellanox.com/downloads/ofed/MLNX_EN-3.4-2.0.0.0/mlnx-en-3.4-2.0.0.0-ubuntu16.04-x86_64.tgz
# mkdir mlnx
# tar xvzf mlnx-en-3.4-2.0.0.0-ubuntu16.04-x86_64.tgz --strip-components=2 -C mlnx/
Update the /etc/apt/sources.list.d/mlnx_ofed.list file with extraction directory path as mentioned below
# echo "deb file:/root/packages/mlnx/DEBS ./" > /etc/apt/sources.list.d/mlnx_ofed.list
Add key to the apt tool and then update
# wget -qO - http://www.mellanox.com/downloads/ofed/RPM-GPG-KEY-Mellanox | sudo apt-key add -# apt update
Install the driver
# apt install -y mlnx-en-dpdk


I am getting the error message as follows
          # cat /sys/class/net/enp6s0/phys_port_id
          cat: /sys/class/net/enp6s0/phys_port_id: Operation not supported

     currently the modinfo details is as below.

# modinfo mlx4_en
filename:       /lib/modules/4.4.0-59-generic/updates/dkms/mlx4_en.ko
version:        3.4-2.0.0 (23 Nov 2016)
license:        Dual BSD/GPL
description:    Mellanox ConnectX HCA Ethernet driver
author:         Liran Liss, Yevgeny Petrilin
srcversion:     B25238324E1CDB4A38E4970
depends:        mlx4_core,mlx_compat,ptp,vxlan
vermagic:       4.4.0-59-generic SMP mod_unload modversions
parm:           udp_rss:Enable RSS for incoming UDP traffic or disabled (0) (uint)
parm:           pfctx:Priority based Flow Control policy on TX[7:0]. Per priority bit mask (uint)
parm:           pfcrx:Priority based Flow Control policy on RX[7:0]. Per priority bit mask (uint)
parm:           inline_thold:Threshold for using inline data (range: 17-104, default: 104) (uint)

# hostnamectl
Static hostname: ubuntu
Icon name: computer-server
Chassis: server
Operating System: Ubuntu 16.04.1 LTS
Kernel: Linux 4.4.0-59-generic
Architecture: x86-64

Please let us know, is there any patch available to restore the phys port id in mellanox NICs ?

Kural

Kuralamudhan Ramakrishnan


--------------------------------------------------------------
Intel Research and Development Ireland Limited
Registered in Ireland
Registered Office: Collinstown Industrial Park, Leixlip, County Kildare
Registered Number: 308263


This e-mail and any attachments may contain confidential material for the sole
use of the intended recipient(s). Any review or distribution by others is
strictly prohibited. If you are not the intended recipient, please contact the
sender and delete all copies.

Re: [dpdk-dev] Regarding phys port id in mellanox NIC

[Adrien Mazarguil]

Hi Kural,

On Thu, Feb 23, 2017 at 11:23:37AM +0000, Ramakrishnan, Kuralamudhan wrote:
> Hello,
> 
> I have a question regarding the phys port id in mellanox NIC, is this feature deprecated in the latest mlnx-en-dpdk driver ?
> 
> Issue:
> 
> I am working on the Ethernet controller: Mellanox Technologies MT27520 Family [ConnectX-3 Pro] NIC.
> I used to read the /sys/class/net/enp6s0/phys_port_id file, this will give me the value as 248a070300728f70 for port 1 and 248a070300728f71 for port 2.

While I cannot answer about phys_port_id's deprecation status, how about
relying on the simpler dev_port file instead?

 /sys/class/net/enp6s0/dev_port

Which contains either 0 or 1 depending on the underlying physical port
number (that is, unless your Linux kernel version is < 3.15 in which case
you should look into the dev_id file instead, check priv_get_ifname() for
more info).

> The modinfo details before installing the mlnx-en-dpdk is as follows
> 
> # modinfo mlx4_en
> filename: /lib/modules/4.4.0-59-generic/kernel/drivers/net/ethernet/mellanox/mlx4/mlx4_en.ko
> version:        2.2-1 (Feb 2014)
> license:        Dual BSD/GPL
> description:    Mellanox ConnectX HCA Ethernet driver
> author:         Liran Liss, Yevgeny Petrilin
> srcversion:     CF3245DD50A90F3D536D0A7
> depends: mlx4_core,ptp,vxlan
> intree:         Y
> vermagic:       4.4.0-59-generic SMP mod_unload modversions
> parm: udp_rss:Enable RSS for incoming UDP traffic or disabled (0) (uint)
> parm: pfctx:Priority based Flow Control policy on TX[7:0]. Per priority bit mask (uint)
> parm: pfcrx:Priority based Flow Control policy on RX[7:0]. Per priority bit mask (uint)
> parm: inline_thold:Threshold for using inline data (range: 17-104, default: 104) (uint)
> 
> After that that I installed the mlnx-en-dpdk drivers as follows.
> 
> Download and extract Mellanox divers:
> # cd ~/packages
> # wget http://www.mellanox.com/downloads/ofed/MLNX_EN-3.4-2.0.0.0/mlnx-en-3.4-2.0.0.0-ubuntu16.04-x86_64.tgz
> # mkdir mlnx
> # tar xvzf mlnx-en-3.4-2.0.0.0-ubuntu16.04-x86_64.tgz --strip-components=2 -C mlnx/
> Update the /etc/apt/sources.list.d/mlnx_ofed.list file with extraction directory path as mentioned below
> # echo "deb file:/root/packages/mlnx/DEBS ./" > /etc/apt/sources.list.d/mlnx_ofed.list
> Add key to the apt tool and then update
> # wget -qO - http://www.mellanox.com/downloads/ofed/RPM-GPG-KEY-Mellanox | sudo apt-key add -# apt update
> Install the driver
> # apt install -y mlnx-en-dpdk
> 
> 
> I am getting the error message as follows
>           # cat /sys/class/net/enp6s0/phys_port_id
>           cat: /sys/class/net/enp6s0/phys_port_id: Operation not supported

Same here, I'm not sure this file can be relied on anymore.

>      currently the modinfo details is as below.
> 
> # modinfo mlx4_en
> filename:       /lib/modules/4.4.0-59-generic/updates/dkms/mlx4_en.ko
> version:        3.4-2.0.0 (23 Nov 2016)
> license:        Dual BSD/GPL
> description:    Mellanox ConnectX HCA Ethernet driver
> author:         Liran Liss, Yevgeny Petrilin
> srcversion:     B25238324E1CDB4A38E4970
> depends:        mlx4_core,mlx_compat,ptp,vxlan
> vermagic:       4.4.0-59-generic SMP mod_unload modversions
> parm:           udp_rss:Enable RSS for incoming UDP traffic or disabled (0) (uint)
> parm:           pfctx:Priority based Flow Control policy on TX[7:0]. Per priority bit mask (uint)
> parm:           pfcrx:Priority based Flow Control policy on RX[7:0]. Per priority bit mask (uint)
> parm:           inline_thold:Threshold for using inline data (range: 17-104, default: 104) (uint)
> 
> # hostnamectl
> Static hostname: ubuntu
> Icon name: computer-server
> Chassis: server
> Operating System: Ubuntu 16.04.1 LTS
> Kernel: Linux 4.4.0-59-generic
> Architecture: x86-64
> 
> Please let us know, is there any patch available to restore the phys port id in mellanox NICs ?

Well, I suggest using dev_port then. So far only mlx4 exposes two physical
ports on a single PCI bus address hence the need for this distinction.
This is not the case with mlx5, where dev_port is always 0.

> Kural
> 
> Kuralamudhan Ramakrishnan
> 
> 
> --------------------------------------------------------------
> Intel Research and Development Ireland Limited
> Registered in Ireland
> Registered Office: Collinstown Industrial Park, Leixlip, County Kildare
> Registered Number: 308263
> 
> 
> This e-mail and any attachments may contain confidential material for the sole
> use of the intended recipient(s). Any review or distribution by others is
> strictly prohibited. If you are not the intended recipient, please contact the
> sender and delete all copies.

Remember this this a public mailing list, thankfully I'm one of the intended
recipients, phew!

-- 
Adrien Mazarguil
6WIND