* [dpdk-dev] [PATCH] net/mlx4: fix rx not working after mbuf alloc failure [not found] <1492069426-123358-1-git-send-email-Charles.Myers@spirent.com> @ 2017-04-13 7:52 ` Myers, Charles 2017-04-13 12:05 ` Adrien Mazarguil 2017-04-13 22:15 ` Charles Myers 0 siblings, 2 replies; 6+ messages in thread From: Myers, Charles @ 2017-04-13 7:52 UTC (permalink / raw) To: adrien.mazarguil, nelio.laranjeiro; +Cc: dev I ran into an issue where the mlx4 driver stops receiving packets when mbuf allocation fails in mlx4_rx_burst(). This issue appears to be caused because the code doesn't recycle the existing mbuf to the sges array when mbuf allocation fails as is done in the code right above it which handles the (wc.status != IBV_WC_SUCCESS) case. Copying the code from the above case before jumping to repost fixes the issue for me. Signed-off-by: Charles Myers <Charles.Myers@spirent.com> --- drivers/net/mlx4/mlx4.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/mlx4/mlx4.c b/drivers/net/mlx4/mlx4.c index aff9155..59d26fe 100644 --- a/drivers/net/mlx4/mlx4.c +++ b/drivers/net/mlx4/mlx4.c @@ -3169,6 +3169,9 @@ struct txq_mp2mr_mbuf_check_data { /* Increase out of memory counters. */ ++rxq->stats.rx_nombuf; ++rxq->priv->dev->data->rx_mbuf_alloc_failed; + + /* Add SGE to array for repost. */ + sges[i] = elt->sge; goto repost; } -- 1.7.9.5 ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-dev] [PATCH] net/mlx4: fix rx not working after mbuf alloc failure 2017-04-13 7:52 ` [dpdk-dev] [PATCH] net/mlx4: fix rx not working after mbuf alloc failure Myers, Charles @ 2017-04-13 12:05 ` Adrien Mazarguil 2017-04-13 12:22 ` Ferruh Yigit 2017-04-13 22:15 ` Charles Myers 1 sibling, 1 reply; 6+ messages in thread From: Adrien Mazarguil @ 2017-04-13 12:05 UTC (permalink / raw) To: Myers, Charles; +Cc: nelio.laranjeiro, dev Hi Charles, On Thu, Apr 13, 2017 at 07:52:34AM +0000, Myers, Charles wrote: > I ran into an issue where the mlx4 driver stops receiving packets when mbuf allocation fails in mlx4_rx_burst(). > > This issue appears to be caused because the code doesn't recycle the existing mbuf to the sges array > when mbuf allocation fails as is done in the code right above it which handles the > (wc.status != IBV_WC_SUCCESS) case. > > Copying the code from the above case before jumping to repost fixes the issue for me. > > Signed-off-by: Charles Myers <Charles.Myers@spirent.com> Thanks, this addresses a very old bug present since v2.1.0. As a fix, the subject line should contain the word "fix", something like: net/mlx4: fix Rx after mbuf allocation failure And since it's a fix: Fixes: acac55f16412 ("mlx4: use MOFED 3.0 fast verbs interface for Rx operations") Cc: stable@dpdk.org Please also make sure the commit log is formatted according to the submission guidelines (50 chars max for subject line, 75 chars for the rest (except for the Fixes line), yada yada - see check-git-log.sh). > --- > drivers/net/mlx4/mlx4.c | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/drivers/net/mlx4/mlx4.c b/drivers/net/mlx4/mlx4.c index aff9155..59d26fe 100644 > --- a/drivers/net/mlx4/mlx4.c > +++ b/drivers/net/mlx4/mlx4.c > @@ -3169,6 +3169,9 @@ struct txq_mp2mr_mbuf_check_data { > /* Increase out of memory counters. */ > ++rxq->stats.rx_nombuf; > ++rxq->priv->dev->data->rx_mbuf_alloc_failed; > + Another nit here, the above blank line is unnecessary. > + /* Add SGE to array for repost. */ > + sges[i] = elt->sge; > goto repost; > } > > -- > 1.7.9.5 > Otherwise, Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com> -- Adrien Mazarguil 6WIND ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-dev] [PATCH] net/mlx4: fix rx not working after mbuf alloc failure 2017-04-13 12:05 ` Adrien Mazarguil @ 2017-04-13 12:22 ` Ferruh Yigit 2017-04-13 12:28 ` Adrien Mazarguil 0 siblings, 1 reply; 6+ messages in thread From: Ferruh Yigit @ 2017-04-13 12:22 UTC (permalink / raw) To: Adrien Mazarguil, Myers, Charles; +Cc: nelio.laranjeiro, dev On 4/13/2017 1:05 PM, Adrien Mazarguil wrote: > Hi Charles, > > On Thu, Apr 13, 2017 at 07:52:34AM +0000, Myers, Charles wrote: >> I ran into an issue where the mlx4 driver stops receiving packets when mbuf allocation fails in mlx4_rx_burst(). >> >> This issue appears to be caused because the code doesn't recycle the existing mbuf to the sges array >> when mbuf allocation fails as is done in the code right above it which handles the >> (wc.status != IBV_WC_SUCCESS) case. >> >> Copying the code from the above case before jumping to repost fixes the issue for me. >> >> Signed-off-by: Charles Myers <Charles.Myers@spirent.com> > > Thanks, this addresses a very old bug present since v2.1.0. As a fix, the > subject line should contain the word "fix", something like: Hi Adrien, Charles, I can't see this patch, any chance that it doesn't hit the mail list? Is there a patchwork link for patch? > > net/mlx4: fix Rx after mbuf allocation failure > > And since it's a fix: > > Fixes: acac55f16412 ("mlx4: use MOFED 3.0 fast verbs interface for Rx operations") > Cc: stable@dpdk.org > > Please also make sure the commit log is formatted according to the > submission guidelines (50 chars max for subject line, 75 chars for the rest > (except for the Fixes line), yada yada - see check-git-log.sh). > >> --- >> drivers/net/mlx4/mlx4.c | 3 +++ >> 1 file changed, 3 insertions(+) >> >> diff --git a/drivers/net/mlx4/mlx4.c b/drivers/net/mlx4/mlx4.c index aff9155..59d26fe 100644 >> --- a/drivers/net/mlx4/mlx4.c >> +++ b/drivers/net/mlx4/mlx4.c >> @@ -3169,6 +3169,9 @@ struct txq_mp2mr_mbuf_check_data { >> /* Increase out of memory counters. */ >> ++rxq->stats.rx_nombuf; >> ++rxq->priv->dev->data->rx_mbuf_alloc_failed; >> + > > Another nit here, the above blank line is unnecessary. > >> + /* Add SGE to array for repost. */ >> + sges[i] = elt->sge; >> goto repost; >> } >> >> -- >> 1.7.9.5 >> > > Otherwise, > > Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com> > ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-dev] [PATCH] net/mlx4: fix rx not working after mbuf alloc failure 2017-04-13 12:22 ` Ferruh Yigit @ 2017-04-13 12:28 ` Adrien Mazarguil 0 siblings, 0 replies; 6+ messages in thread From: Adrien Mazarguil @ 2017-04-13 12:28 UTC (permalink / raw) To: Ferruh Yigit; +Cc: Myers, Charles, nelio.laranjeiro, dev On Thu, Apr 13, 2017 at 01:22:39PM +0100, Ferruh Yigit wrote: > On 4/13/2017 1:05 PM, Adrien Mazarguil wrote: > > Hi Charles, > > > > On Thu, Apr 13, 2017 at 07:52:34AM +0000, Myers, Charles wrote: > >> I ran into an issue where the mlx4 driver stops receiving packets when mbuf allocation fails in mlx4_rx_burst(). > >> > >> This issue appears to be caused because the code doesn't recycle the existing mbuf to the sges array > >> when mbuf allocation fails as is done in the code right above it which handles the > >> (wc.status != IBV_WC_SUCCESS) case. > >> > >> Copying the code from the above case before jumping to repost fixes the issue for me. > >> > >> Signed-off-by: Charles Myers <Charles.Myers@spirent.com> > > > > Thanks, this addresses a very old bug present since v2.1.0. As a fix, the > > subject line should contain the word "fix", something like: > > Hi Adrien, Charles, > > I can't see this patch, any chance that it doesn't hit the mail list? Is > there a patchwork link for patch? Ah, I probably only got it because I was also a recipient. Charles, have you subscribed to dev@dpdk.org? > > > > net/mlx4: fix Rx after mbuf allocation failure > > > > And since it's a fix: > > > > Fixes: acac55f16412 ("mlx4: use MOFED 3.0 fast verbs interface for Rx operations") > > Cc: stable@dpdk.org > > > > Please also make sure the commit log is formatted according to the > > submission guidelines (50 chars max for subject line, 75 chars for the rest > > (except for the Fixes line), yada yada - see check-git-log.sh). > > > >> --- > >> drivers/net/mlx4/mlx4.c | 3 +++ > >> 1 file changed, 3 insertions(+) > >> > >> diff --git a/drivers/net/mlx4/mlx4.c b/drivers/net/mlx4/mlx4.c index aff9155..59d26fe 100644 > >> --- a/drivers/net/mlx4/mlx4.c > >> +++ b/drivers/net/mlx4/mlx4.c > >> @@ -3169,6 +3169,9 @@ struct txq_mp2mr_mbuf_check_data { > >> /* Increase out of memory counters. */ > >> ++rxq->stats.rx_nombuf; > >> ++rxq->priv->dev->data->rx_mbuf_alloc_failed; > >> + > > > > Another nit here, the above blank line is unnecessary. > > > >> + /* Add SGE to array for repost. */ > >> + sges[i] = elt->sge; > >> goto repost; > >> } > >> > >> -- > >> 1.7.9.5 > >> > > > > Otherwise, > > > > Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com> > > > -- Adrien Mazarguil 6WIND ^ permalink raw reply [flat|nested] 6+ messages in thread
* [dpdk-dev] [PATCH] net/mlx4: fix rx not working after mbuf alloc failure 2017-04-13 7:52 ` [dpdk-dev] [PATCH] net/mlx4: fix rx not working after mbuf alloc failure Myers, Charles 2017-04-13 12:05 ` Adrien Mazarguil @ 2017-04-13 22:15 ` Charles Myers 2017-04-14 9:58 ` Ferruh Yigit 1 sibling, 1 reply; 6+ messages in thread From: Charles Myers @ 2017-04-13 22:15 UTC (permalink / raw) To: dev; +Cc: Charles From: Charles <Charles.Myers@spirent.com> Fixes issue where mlx4 driver stops receiving packets when mbuf allocation fails in mlx4_rx_burst(). This issue appears to be caused because the code doesn't recycle the existing mbuf to the sges array when mbuf allocation fails as is done in the code right above it which handles (wc.status != IBV_WC_SUCCESS). Copying the code from the above case fixes the issue. Fixes: acac55f16412 ("mlx4: use MOFED 3.0 fast verbs interface for Rx operations") Signed-off-by: Charles Myers <Charles.Myers@spirent.com> --- drivers/net/mlx4/mlx4.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/mlx4/mlx4.c b/drivers/net/mlx4/mlx4.c index aff9155..59d26fe 100644 --- a/drivers/net/mlx4/mlx4.c +++ b/drivers/net/mlx4/mlx4.c @@ -3169,6 +3169,8 @@ struct txq_mp2mr_mbuf_check_data { /* Increase out of memory counters. */ ++rxq->stats.rx_nombuf; ++rxq->priv->dev->data->rx_mbuf_alloc_failed; + /* Add SGE to array for repost. */ + sges[i] = elt->sge; goto repost; } -- 1.7.9.5 ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-dev] [PATCH] net/mlx4: fix rx not working after mbuf alloc failure 2017-04-13 22:15 ` Charles Myers @ 2017-04-14 9:58 ` Ferruh Yigit 0 siblings, 0 replies; 6+ messages in thread From: Ferruh Yigit @ 2017-04-14 9:58 UTC (permalink / raw) To: Charles Myers, dev; +Cc: Adrien Mazarguil On 4/13/2017 11:15 PM, Charles Myers wrote: > From: Charles <Charles.Myers@spirent.com> > > Fixes issue where mlx4 driver stops receiving packets when mbuf > allocation fails in mlx4_rx_burst(). > > This issue appears to be caused because the code doesn't recycle the > existing mbuf to the sges array when mbuf allocation fails as is done > in the code right above it which handles (wc.status != IBV_WC_SUCCESS). > > Copying the code from the above case fixes the issue. > > Fixes: acac55f16412 ("mlx4: use MOFED 3.0 fast verbs interface for Rx > operations") Cc: stable@dpdk.org > > Signed-off-by: Charles Myers <Charles.Myers@spirent.com> Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com> Applied to dpdk-next-net/master, thanks. ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2017-04-14 9:58 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <1492069426-123358-1-git-send-email-Charles.Myers@spirent.com>
2017-04-13 7:52 ` [dpdk-dev] [PATCH] net/mlx4: fix rx not working after mbuf alloc failure Myers, Charles
2017-04-13 12:05 ` Adrien Mazarguil
2017-04-13 12:22 ` Ferruh Yigit
2017-04-13 12:28 ` Adrien Mazarguil
2017-04-13 22:15 ` Charles Myers
2017-04-14 9:58 ` Ferruh Yigit
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).