[dpdk-dev] [PATCH 05/23] bnxt: add functions for tx_loopback, set_vf_mac and queues_drop_en

[Ajit Khaparde <ajit.khaparde@broadcom.com>]

Add functions rte_pmd_bnxt_set_tx_loopback,
rte_pmd_bnxt_set_all_queues_drop_en and
rte_pmd_bnxt_set_vf_mac_addr to configure tx_loopback,
queue_drop and VF MAC address setting in the hardware.
It also adds the necessary functions to send the HWRM commands
to the firmware.

Signed-off-by: Steeven Li <steeven.li@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
 drivers/net/bnxt/Makefile                 |   4 +
 drivers/net/bnxt/bnxt_hwrm.c              | 108 ++++++++++++++++++++
 drivers/net/bnxt/bnxt_hwrm.h              |   4 +
 drivers/net/bnxt/hsi_struct_def_dpdk.h    |  79 +++++++++++++++
 drivers/net/bnxt/rte_pmd_bnxt.c           | 163 ++++++++++++++++++++++++++++++
 drivers/net/bnxt/rte_pmd_bnxt.h           |  87 ++++++++++++++++
 drivers/net/bnxt/rte_pmd_bnxt_version.map |   9 ++
 7 files changed, 454 insertions(+)
 create mode 100644 drivers/net/bnxt/rte_pmd_bnxt.c
 create mode 100644 drivers/net/bnxt/rte_pmd_bnxt.h

diff --git a/drivers/net/bnxt/Makefile b/drivers/net/bnxt/Makefile
index 0fffe35..b03f65d 100644
--- a/drivers/net/bnxt/Makefile
+++ b/drivers/net/bnxt/Makefile
@@ -38,6 +38,8 @@ include $(RTE_SDK)/mk/rte.vars.mk
 #
 LIB = librte_pmd_bnxt.a
 
+EXPORT_MAP := rte_pmd_bnxt_version.map
+
 LIBABIVER := 1
 
 CFLAGS += -O3
@@ -60,10 +62,12 @@ SRCS-$(CONFIG_RTE_LIBRTE_BNXT_PMD) += bnxt_txq.c
 SRCS-$(CONFIG_RTE_LIBRTE_BNXT_PMD) += bnxt_txr.c
 SRCS-$(CONFIG_RTE_LIBRTE_BNXT_PMD) += bnxt_vnic.c
 SRCS-$(CONFIG_RTE_LIBRTE_BNXT_PMD) += bnxt_irq.c
+SRCS-$(CONFIG_RTE_LIBRTE_BNXT_PMD) += rte_pmd_bnxt.c
 
 #
 # Export include files
 #
 SYMLINK-y-include +=
+SYMLINK-$(CONFIG_RTE_LIBRTE_BNXT_PMD)-include := rte_pmd_bnxt.h
 
 include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/net/bnxt/bnxt_hwrm.c b/drivers/net/bnxt/bnxt_hwrm.c
index db00a74..c1cf95d 100644
--- a/drivers/net/bnxt/bnxt_hwrm.c
+++ b/drivers/net/bnxt/bnxt_hwrm.c
@@ -2071,6 +2071,24 @@ int bnxt_hwrm_allocate_vfs(struct bnxt *bp, int num_vfs)
 	return rc;
 }
 
+int bnxt_hwrm_pf_evb_mode(struct bnxt *bp)
+{
+	struct hwrm_func_cfg_input req = {0};
+	struct hwrm_func_cfg_output *resp = bp->hwrm_cmd_resp_addr;
+	int rc;
+
+	HWRM_PREP(req, FUNC_CFG, -1, resp);
+
+	req.fid = rte_cpu_to_le_16(0xffff);
+	req.enables = rte_cpu_to_le_32(HWRM_FUNC_CFG_INPUT_ENABLES_EVB_MODE);
+	req.evb_mode = bp->pf.evb_mode;
+
+	rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+	HWRM_CHECK_RESULT;
+
+	return rc;
+}
+
 int bnxt_hwrm_tunnel_dst_port_alloc(struct bnxt *bp, uint16_t port,
 				uint8_t tunnel_type)
 {
@@ -2219,3 +2237,93 @@ int bnxt_hwrm_exec_fwd_resp(struct bnxt *bp, uint16_t target_id,
 
 	return rc;
 }
+
+static int bnxt_hwrm_func_vf_vnic_query(struct bnxt *bp, uint16_t vf,
+					uint16_t *vnic_ids)
+{
+	struct hwrm_func_vf_vnic_ids_query_input req = {0};
+	struct hwrm_func_vf_vnic_ids_query_output *resp =
+						bp->hwrm_cmd_resp_addr;
+	int rc;
+
+	/* First query all VNIC ids */
+	HWRM_PREP(req, FUNC_VF_VNIC_IDS_QUERY, -1, resp_vf_vnic_ids);
+
+	req.vf_id = rte_cpu_to_le_16(bp->pf.first_vf_id + vf);
+	req.max_vnic_id_cnt = rte_cpu_to_le_32(bp->pf.total_vnics);
+	req.vnic_id_tbl_addr = rte_cpu_to_le_64(rte_mem_virt2phy(vnic_ids));
+
+	if (req.vnic_id_tbl_addr == 0) {
+		RTE_LOG(ERR, PMD,
+		"unable to map VNIC ID table address to physical memory\n");
+		//rte_free(vnic_ids);
+		return -ENOMEM;
+	}
+	rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+	if (rc) {
+		RTE_LOG(ERR, PMD, "hwrm_func_vf_vnic_query failed rc:%d\n", rc);
+		return -1;
+	} else if (resp->error_code) {
+		rc = rte_le_to_cpu_16(resp->error_code);
+		RTE_LOG(ERR, PMD, "hwrm_func_vf_vnic_query error %d\n", rc);
+		return -1;
+	}
+
+	return rte_le_to_cpu_32(resp->vnic_id_cnt);
+}
+
+/*
+ * This function queries the VNIC IDs  for a specified VF. It then calls
+ * the vnic_cb to update the necessary field in vnic_info with cbdata.
+ * Then it calls the hwrm_cb function to program this new vnic configuration.
+ */
+int bnxt_hwrm_func_vf_vnic_query_and_config(struct bnxt *bp, uint16_t vf,
+	void (*vnic_cb)(struct bnxt_vnic_info *, void *), void *cbdata,
+	int (*hwrm_cb)(struct bnxt *bp, struct bnxt_vnic_info *vnic))
+{
+	struct bnxt_vnic_info vnic;
+	int rc = 0;
+	int i, num_vnic_ids;
+	uint16_t *vnic_ids;
+	size_t vnic_id_sz;
+	size_t sz;
+
+	/* First query all VNIC ids */
+	vnic_id_sz = bp->pf.total_vnics * sizeof(*vnic_ids);
+	vnic_ids = rte_malloc("bnxt_hwrm_vf_vnic_ids_query", vnic_id_sz,
+			RTE_CACHE_LINE_SIZE);
+	if (vnic_ids == NULL) {
+		rc = -ENOMEM;
+		return rc;
+	}
+	for (sz = 0; sz < vnic_id_sz; sz += getpagesize())
+		rte_mem_lock_page(((char *)vnic_ids) + sz);
+
+	num_vnic_ids = bnxt_hwrm_func_vf_vnic_query(bp, vf, vnic_ids);
+
+	if (num_vnic_ids < 0)
+		return num_vnic_ids;
+
+	/* Retrieve VNIC, update bd_stall then update */
+
+	for (i = 0; i < num_vnic_ids; i++) {
+		memset(&vnic, 0, sizeof(struct bnxt_vnic_info));
+		vnic.fw_vnic_id = rte_le_to_cpu_16(vnic_ids[i]);
+		rc = bnxt_hwrm_vnic_qcfg(bp, &vnic, bp->pf.first_vf_id + vf);
+		if (rc)
+			break;
+		if (vnic.mru == 4)	// Unallocated
+			continue;
+
+		vnic_cb(&vnic, cbdata);
+
+		rc = hwrm_cb(bp, &vnic);
+		if (rc)
+			break;
+	}
+
+	rte_free(vnic_ids);
+
+	return rc;
+}
+
diff --git a/drivers/net/bnxt/bnxt_hwrm.h b/drivers/net/bnxt/bnxt_hwrm.h
index 20fe2c6..09b935c 100644
--- a/drivers/net/bnxt/bnxt_hwrm.h
+++ b/drivers/net/bnxt/bnxt_hwrm.h
@@ -111,6 +111,7 @@ int bnxt_hwrm_allocate_pf_only(struct bnxt *bp);
 int bnxt_hwrm_allocate_vfs(struct bnxt *bp, int num_vfs);
 int bnxt_hwrm_func_vf_mac(struct bnxt *bp, uint16_t vf,
 			  const uint8_t *mac_addr);
+int bnxt_hwrm_pf_evb_mode(struct bnxt *bp);
 int bnxt_hwrm_func_qcfg_vf_default_mac(struct bnxt *bp, uint16_t vf,
 				       struct ether_addr *mac);
 int bnxt_hwrm_tunnel_dst_port_alloc(struct bnxt *bp, uint16_t port,
@@ -118,5 +119,8 @@ int bnxt_hwrm_tunnel_dst_port_alloc(struct bnxt *bp, uint16_t port,
 int bnxt_hwrm_tunnel_dst_port_free(struct bnxt *bp, uint16_t port,
 				uint8_t tunnel_type);
 void bnxt_free_tunnel_ports(struct bnxt *bp);
+int bnxt_hwrm_func_vf_vnic_query_and_config(struct bnxt *bp, uint16_t vf,
+	void (*vnic_cb)(struct bnxt_vnic_info *, void *), void *cbdata,
+	int (*hwrm_cb)(struct bnxt *bp, struct bnxt_vnic_info *vnic));
 
 #endif
diff --git a/drivers/net/bnxt/hsi_struct_def_dpdk.h b/drivers/net/bnxt/hsi_struct_def_dpdk.h
index da3771a..c730337 100644
--- a/drivers/net/bnxt/hsi_struct_def_dpdk.h
+++ b/drivers/net/bnxt/hsi_struct_def_dpdk.h
@@ -2766,6 +2766,85 @@ struct hwrm_func_cfg_output {
 	 */
 } __attribute__((packed));
 
+/* hwrm_func_vf_vnic_ids_query */
+/* Description: This command is used to query vf vnic ids. */
+/* Input	(32 bytes) */
+struct hwrm_func_vf_vnic_ids_query_input {
+	uint16_t req_type;
+	/*
+	 * This value indicates what type of request this is. The format
+	 * for the rest of the command is determined by this field.
+	 */
+	uint16_t cmpl_ring;
+	/*
+	 * This value indicates the what completion ring the request
+	 * will be optionally completed on. If the value is -1, then no
+	 * CR completion will be generated. Any other value must be a
+	 * valid CR ring_id value for this function.
+	 */
+	uint16_t seq_id;
+	/* This value indicates the command sequence number. */
+	uint16_t target_id;
+	/*
+	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+	 * - HWRM
+	 */
+	uint64_t resp_addr;
+	/*
+	 * This is the host address where the response will be written
+	 * when the request is complete. This area must be 16B aligned
+	 * and must be cleared to zero before the request is made.
+	 */
+	uint16_t vf_id;
+	/*
+	 * This value is used to identify a Virtual Function	(VF). The
+	 * scope of VF ID is local within a PF.
+	 */
+	uint8_t unused_0;
+	uint8_t unused_1;
+	uint32_t max_vnic_id_cnt;
+	/* Max number of vnic ids in vnic id table */
+	uint64_t vnic_id_tbl_addr;
+	/* This is the address for VF VNIC ID table */
+} __attribute__((packed));
+
+/* Output	(16 bytes) */
+struct hwrm_func_vf_vnic_ids_query_output {
+	uint16_t error_code;
+	/*
+	 * Pass/Fail or error type Note: receiver to verify the in
+	 * parameters, and fail the call with an error when appropriate
+	 */
+	uint16_t req_type;
+	/* This field returns the type of original request. */
+	uint16_t seq_id;
+	/* This field provides original sequence number of the command. */
+	uint16_t resp_len;
+	/*
+	 * This field is the length of the response in bytes. The last
+	 * byte of the response is a valid flag that will read as '1'
+	 * when the command has been completely written to memory.
+	 */
+	uint32_t vnic_id_cnt;
+	/*
+	 * Actual number of vnic ids Each VNIC ID is written as a 32-bit
+	 * number.
+	 */
+	uint8_t unused_0;
+	uint8_t unused_1;
+	uint8_t unused_2;
+	uint8_t valid;
+	/*
+	 * This field is used in Output records to indicate that the
+	 * output is completely written to RAM. This field should be
+	 * read as '1' to indicate that the output has been completely
+	 * written. When writing a command completion or response to an
+	 * internal processor, the order of writes has to be such that
+	 * this field is written last.
+	 */
+} __attribute__((packed));
+
 /* hwrm_func_drv_rgtr */
 /*
  * Description: This command is used by the function driver to register its
diff --git a/drivers/net/bnxt/rte_pmd_bnxt.c b/drivers/net/bnxt/rte_pmd_bnxt.c
new file mode 100644
index 0000000..667b24c
--- /dev/null
+++ b/drivers/net/bnxt/rte_pmd_bnxt.c
@@ -0,0 +1,163 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) Broadcom Limited.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Broadcom Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <inttypes.h>
+#include <stdbool.h>
+
+#include <rte_dev.h>
+#include <rte_ethdev.h>
+#include <rte_malloc.h>
+#include <rte_cycles.h>
+#include <rte_byteorder.h>
+
+#include "bnxt.h"
+#include "bnxt_filter.h"
+#include "bnxt_hwrm.h"
+#include "bnxt_vnic.h"
+#include "rte_pmd_bnxt.h"
+#include "hsi_struct_def_dpdk.h"
+
+int rte_pmd_bnxt_set_tx_loopback(uint8_t port, uint8_t on)
+{
+	struct rte_eth_dev *eth_dev;
+	struct bnxt *bp;
+	int rc;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
+
+	if (on > 1)
+		return -EINVAL;
+
+	eth_dev = &rte_eth_devices[port];
+	bp = (struct bnxt *)eth_dev->data->dev_private;
+
+	if (!BNXT_PF(bp)) {
+		RTE_LOG(ERR, PMD,
+			"Attempt to set Tx loopback on non-PF port %d!\n",
+			port);
+		return -ENOTSUP;
+	}
+
+	if (on)
+		bp->pf.evb_mode = BNXT_EVB_MODE_VEB;
+	else
+		bp->pf.evb_mode = BNXT_EVB_MODE_VEPA;
+
+	rc = bnxt_hwrm_pf_evb_mode(bp);
+
+	return rc;
+}
+
+static void
+rte_pmd_bnxt_set_all_queues_drop_en_cb(struct bnxt_vnic_info *vnic, void *onptr)
+{
+	uint8_t *on = onptr;
+	vnic->bd_stall = !(*on);
+}
+
+int rte_pmd_bnxt_set_all_queues_drop_en(uint8_t port, uint8_t on)
+{
+	struct rte_eth_dev *eth_dev;
+	struct bnxt *bp;
+	uint32_t i;
+	int rc;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
+
+	if (on > 1)
+		return -EINVAL;
+
+	eth_dev = &rte_eth_devices[port];
+	bp = (struct bnxt *)eth_dev->data->dev_private;
+
+	if (!BNXT_PF(bp)) {
+		RTE_LOG(ERR, PMD,
+			"Attempt to set all queues drop on non-PF port!\n");
+		return -ENOTSUP;
+	}
+
+	if (bp->vnic_info == NULL)
+		return -ENODEV;
+
+	/* Stall PF */
+	for (i = 0; i < bp->nr_vnics; i++) {
+		bp->vnic_info[i].bd_stall = !on;
+		rc = bnxt_hwrm_vnic_cfg(bp, &bp->vnic_info[i]);
+		if (rc) {
+			RTE_LOG(ERR, PMD, "Failed to update PF VNIC %d.\n", i);
+			return rc;
+		}
+	}
+
+	/* Stall all active VFs */
+	for (i = 0; i < bp->pf.active_vfs; i++) {
+		rc = bnxt_hwrm_func_vf_vnic_query_and_config(bp, i,
+				rte_pmd_bnxt_set_all_queues_drop_en_cb, &on,
+				bnxt_hwrm_vnic_cfg);
+		if (rc) {
+			RTE_LOG(ERR, PMD, "Failed to update VF VNIC %d.\n", i);
+			break;
+		}
+	}
+
+	return rc;
+}
+
+int rte_pmd_bnxt_set_vf_mac_addr(uint8_t port, uint16_t vf,
+				struct ether_addr *mac_addr)
+{
+	struct rte_eth_dev *dev;
+	struct rte_eth_dev_info dev_info;
+	struct bnxt *bp;
+	int rc;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
+
+	dev = &rte_eth_devices[port];
+	rte_eth_dev_info_get(port, &dev_info);
+	bp = (struct bnxt *)dev->data->dev_private;
+
+	if (vf >= dev_info.max_vfs || mac_addr == NULL)
+		return -EINVAL;
+
+	if (!BNXT_PF(bp)) {
+		RTE_LOG(ERR, PMD,
+			"Attempt to set VF %d mac address on non-PF port %d!\n",
+			vf, port);
+		return -ENOTSUP;
+	}
+
+	rc = bnxt_hwrm_func_vf_mac(bp, vf, (uint8_t *)mac_addr);
+
+	return rc;
+}
diff --git a/drivers/net/bnxt/rte_pmd_bnxt.h b/drivers/net/bnxt/rte_pmd_bnxt.h
new file mode 100644
index 0000000..eec2313
--- /dev/null
+++ b/drivers/net/bnxt/rte_pmd_bnxt.h
@@ -0,0 +1,87 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) Broadcom Limited.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Broadcom Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _PMD_BNXT_H_
+#define _PMD_BNXT_H_
+
+#include <rte_ethdev.h>
+
+/**
+ * Set the VF MAC address.
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param vf
+ *   VF id.
+ * @param mac_addr
+ *   VF MAC address.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENODEV) if *port* invalid.
+ *   - (-EINVAL) if *vf* or *mac_addr* is invalid.
+ */
+int rte_pmd_bnxt_set_vf_mac_addr(uint8_t port, uint16_t vf,
+		struct ether_addr *mac_addr);
+
+/**
+ * Enable/Disable tx loopback
+ *
+ * @param port
+ *    The port identifier of the Ethernet device.
+ * @param on
+ *    1 - Enable tx loopback.
+ *    0 - Disable tx loopback.
+ *
+ * @return
+ *   - (0) if successful.
+ *   - (-ENODEV) if *port* invalid.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_bnxt_set_tx_loopback(uint8_t port, uint8_t on);
+
+/**
+ * set all queues drop enable bit
+ *
+ * @param port
+ *    The port identifier of the Ethernet device.
+ * @param on
+ *    1 - set the queue drop enable bit for all pools.
+ *    0 - reset the queue drop enable bit for all pools.
+ *
+ * @return
+ *   - (0) if successful.
+ *   - (-ENODEV) if *port* invalid.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_bnxt_set_all_queues_drop_en(uint8_t port, uint8_t on);
+#endif /* _PMD_BNXT_H_ */
diff --git a/drivers/net/bnxt/rte_pmd_bnxt_version.map b/drivers/net/bnxt/rte_pmd_bnxt_version.map
index 349c6e1..8b77163 100644
--- a/drivers/net/bnxt/rte_pmd_bnxt_version.map
+++ b/drivers/net/bnxt/rte_pmd_bnxt_version.map
@@ -1,4 +1,13 @@
 DPDK_16.04 {
 
 	local: *;
+
+};
+
+DPDK_17.08 {
+	global:
+
+	rte_pmd_bnxt_set_tx_loopback;
+	rte_pmd_bnxt_set_all_queues_drop_en;
+	rte_pmd_bnxt_set_vf_mac_addr;
 };
-- 
2.10.1 (Apple Git-78)