DPDK patches and discussions
 help / color / mirror / Atom feed
From: Olivier Matz <olivier.matz@6wind.com>
To: Ilya Matveychikov <matvejchikov@gmail.com>
Cc: dev@dpdk.org,
	"adrien.mazarguil@6wind.com" <adrien.mazarguil@6wind.com>,
	Jan Blunck <jblunck@infradead.org>,
	Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Subject: Re: [dpdk-dev] A (possible) problem with `--no-huge` option
Date: Fri, 9 Jun 2017 10:27:27 +0200	[thread overview]
Message-ID: <20170609102727.0eb7f39d@platinum> (raw)
In-Reply-To: <1A9D36CE-8B6D-43A7-BE0C-9F232DFDA263@gmail.com>

Hi Ilya,

On Sun, 14 May 2017 14:34:14 +0400, Ilya Matveychikov <matvejchikov@gmail.com> wrote:
> Hi guys,
> 
> I have a problem while running DPDK with `--no-huge` option. It seems that the problem occurs since commit cdc242f260e766bd95a658b5e0686a62ec04f5b0 and that is the change that affects me:
> 
> +	if ((page & 0x7fffffffffffffULL) == 0)
> +		return RTE_BAD_PHYS_ADDR;
> +
> 
> What I did is to try to create memory pool using rte_pktmbuf_pool_create(). I dig into the issue and found that in my case “page" value is 0x0080000000000000 which means that the page is not present and “soft-dirty” (according to kernel’s documentation):
> 
>    * Bits 0-54  page frame number (PFN) if present
>    * Bits 0-4   swap type if swapped
>    * Bits 5-54  swap offset if swapped
>    * Bit  55    pte is soft-dirty (see Documentation/vm/soft-dirty.txt)
>    * Bit  56    page exclusively mapped (since 4.2)
>    * Bits 57-60 zero
>    * Bit  61    page is file-page or shared-anon (since 3.5)
>    * Bit  62    page swapped
>    * Bit  63    page present
> 
> So, before the change mentioned all “works” fine and such pages were not handled. But now the check causes rte_mempool_populate_default to fail with -EINVAL...
> Can anyone familiar with the memory pool allocation helps with the issue?
> 
> Thanks in advice,
> Ilya Matveychikov.
> 

I can reproduce the issue:

  make config T=x86_64-native-linuxapp-gcc
  make -j32 EXTRA_CFLAGS="-O0 -g"
  mkdir -p /mnt/huge
  mount -t hugetlbfs nodev /mnt/huge
  echo 256 > /sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages

  # ok
  ./build/app/testpmd -l 2,4 --log-level 8 --vdev=eth_null0 -- --no-numa --total-num-mbufs=4096 -i --port-topology=chained

  # fail
  ./build/app/testpmd --no-huge -l 2,4 --log-level 8 --vdev=eth_null0 -- --no-numa --total-num-mbufs=4096 -i --port-topology=chained


I confirm that rte_mem_virt2phy() returns RTE_BAD_PHYS_ADDR,
which makes rte_mempool_populate_virt() to fail.

Reverting cdc242f260e7 ("eal/linux: support running as unprivileged user")
fixes the problem. Actually, it makes rte_mem_virt2phy() return 0 instead
of RTE_BAD_PHYS_ADDR, which is seen as a valid address.

I think querying the physical address when using --no-huge does not make
sense because the memory is not locked, and could be swapped.

Another strange thing, when using --no-huge, the physical address returned
when allocating a memzone is the virtual address.

I see several solutions to fix the issue:

1/ Always set physical addresses to RTE_BAD_PHYS_ADDR when started
   with --no-huge. We consider that the physical address is invalid
   in that case and must not be used.

   This impacts rte_mem_virt2phy() and memzone_reserve*() functions.

   In rte_mempool_populate_virt(), don't expect a physical address
   if the application is started with --no-huge.

2/ Change rte_mem_virt2phy() to return the virtual address when we
   ask for the physical address when started with --no-huge. This is
   wrong, but consistent with what is done in memzones today.

   In rte_mem_virt2phy(), add at the beginning:

     if (!rte_eal_has_hugepages())
         return (intptr_t)virtaddr;

3/ lock pages in memory by reverting
   729f17a932dd ("mem: revert page locking when not using hugepages")

   This would make the physical address available.
   As explained in the commit log, this would also break the ability to
   start dpdk with --no-huge for non-root users.


I think 1/ is better. I'm sending a patch in reply to this mail.
Ilya, please let me know if it fixes your issue.

Regards,
Olivier

  reply	other threads:[~2017-06-09  8:27 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-14 10:34 Ilya Matveychikov
2017-06-09  8:27 ` Olivier Matz [this message]
2017-06-09  8:29   ` [dpdk-dev] [PATCH] eal: don't advertise a physical address when no hugepages Olivier Matz
2017-06-10  8:31     ` Jan Blunck
2017-06-23  8:11       ` Olivier Matz
2017-06-23 17:08         ` Jan Blunck
2017-06-26  7:11           ` santosh
2017-06-12 13:58     ` Adrien Mazarguil
2017-07-03 10:04     ` [dpdk-dev] [PATCH v2] " Olivier Matz
2017-07-03 10:17       ` Jan Blunck
2017-07-04 15:53         ` [dpdk-dev] [dpdk-stable] " Thomas Monjalon
2017-06-09 12:08   ` [dpdk-dev] A (possible) problem with `--no-huge` option Ilya Matveychikov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170609102727.0eb7f39d@platinum \
    --to=olivier.matz@6wind.com \
    --cc=adrien.mazarguil@6wind.com \
    --cc=dev@dpdk.org \
    --cc=jblunck@infradead.org \
    --cc=matvejchikov@gmail.com \
    --cc=sergio.gonzalez.monroy@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).