[dpdk-dev] [PATCH] devtools: rework abi checker script

[dpdk-dev] [PATCH] devtools: rework abi checker script

[Olivier Matz]

The intiatial version of the script had some limitations:
- cannot work on a non-clean workspace
- environment variables are not documented
- no compilation log in case of failure
- return success even it abi is incompatible

This patch addresses these issues and rework the code.

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
---
 devtools/validate-abi.sh | 387 ++++++++++++++++++++++++-----------------------
 1 file changed, 195 insertions(+), 192 deletions(-)

diff --git a/devtools/validate-abi.sh b/devtools/validate-abi.sh
index 0accc99b1..5efcccc90 100755
--- a/devtools/validate-abi.sh
+++ b/devtools/validate-abi.sh
@@ -1,7 +1,8 @@
-#!/bin/sh
+#!/bin/bash -e
 #   BSD LICENSE
 #
 #   Copyright(c) 2015 Neil Horman. All rights reserved.
+#   Copyright(c) 2017 6WIND S.A.
 #   All rights reserved.
 #
 #   Redistribution and use in source and binary forms, with or without
@@ -27,236 +28,238 @@
 #   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 #   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-TAG1=$1
-TAG2=$2
-TARGET=$3
-ABI_DIR=`mktemp -d -p /tmp ABI.XXXXXX`
+abicheck=abi-compliance-checker
+abidump=abi-dumper
+default_dst=abi-check
+default_target=x86_64-native-linuxapp-gcc
 
-usage() {
-	echo "$0 <REV1> <REV2> <TARGET>"
+# trap on error
+err_report() {
+    echo "$0: error at line $1"
 }
+trap 'err_report $LINENO' ERR
 
-log() {
-	local level=$1
-	shift
-	echo "$*"
-}
+print_usage () {
+	cat <<- END_OF_HELP
+	$(basename $0) [options] <rev1> <rev2>
 
-validate_tags() {
+	This script compares the ABI of 2 git revisions of the current
+	workspace. The output is a html report and a compilation log.
 
-	if [ -z "$HASH1" ]
-	then
-		echo "invalid revision: $TAG1"
-		return
-	fi
-	if [ -z "$HASH2" ]
-	then
-		echo "invalid revision: $TAG2"
-		return
-	fi
+	The objective is to make sure that applications built against
+	DSOs from the first revision can still run when executed using
+	the DSOs built from the second revision.
+
+	<rev1> and <rev2> are git commit id or tags.
+
+	Options:
+	  -h		show this help
+	  -j <num>	enable parallel compilation with <num> threads
+	  -v		show compilation logs on the console
+	  -d <dir>	change working directory (default is ${default_dst})
+	  -t <target>	the dpdk target to use (default is ${default_target})
+	  -f		override existing destination directory
+
+	The script returns 0 on success, or the value of last failing
+	call of ${abicheck} (incompatible abi or the tool has run with errors).
+	The errors returned by ${abidump} are ignored.
+
+	END_OF_HELP
 }
 
-validate_args() {
-	if [ -z "$TAG1" ]
-	then
-		echo "Must Specify REV1"
-		return
-	fi
-	if [ -z "$TAG2" ]
-	then
-		echo "Must Specify REV2"
-		return
-	fi
-	if [ -z "$TARGET" ]
-	then
-		echo "Must Specify a build target"
+# log in the file, and on stdout if verbose
+# $1: level string
+# $2: string to be logged
+log() {
+	echo "$1: $2"
+	if [ "${verbose}" != "true" ]; then
+		echo "$1: $2" >&3
 	fi
 }
 
+# launch a command and log it, taking care of surrounding spaces with quotes
+cmd() {
+	local i s whitespace
+	s=""
+	whitespace="[[:space:]]"
+	for i in "$@"; do
+		if [[ $i =~ $whitespace ]]; then
+			i=\"$i\"
+		fi
+		if [ -z "$s" ]; then
+			s="$i"
+		else
+			s="$s $i"
+		fi
+	done
+
+	log "CMD" "$s"
+	"$@"
+}
 
-cleanup_and_exit() {
-	rm -rf $ABI_DIR
-	git checkout $CURRENT_BRANCH
-	exit $1
+# redirect or copy stderr/stdout to a file
+# the syntax is unfamiliar, but it makes the rest of the
+# code easier to read, avoiding the use of pipes
+set_log_file() {
+	# save original stdout and stderr in fd 3 and 4
+	exec 3>&1
+	exec 4>&2
+	# create a new fd 5 that send to a file
+	exec 5> >(cat > $1)
+	# send stdout and stderr to fd 5
+	if [ "${verbose}" = "true" ]; then
+		exec 1> >(tee /dev/fd/5 >&3)
+		exec 2> >(tee /dev/fd/5 >&4)
+	else
+		exec 1>&5
+		exec 2>&5
+	fi
 }
 
 # Make sure we configure SHARED libraries
 # Also turn off IGB and KNI as those require kernel headers to build
 fixup_config() {
-	sed -i -e"$ a\CONFIG_RTE_BUILD_SHARED_LIB=y" config/defconfig_$TARGET
-	sed -i -e"$ a\CONFIG_RTE_NEXT_ABI=n" config/defconfig_$TARGET
-	sed -i -e"$ a\CONFIG_RTE_EAL_IGB_UIO=n" config/defconfig_$TARGET
-	sed -i -e"$ a\CONFIG_RTE_LIBRTE_KNI=n" config/defconfig_$TARGET
-	sed -i -e"$ a\CONFIG_RTE_KNI_KMOD=n" config/defconfig_$TARGET
+	local conf=config/defconfig_$target
+	cmd sed -i -e"$ a\CONFIG_RTE_BUILD_SHARED_LIB=y" $conf
+	cmd sed -i -e"$ a\CONFIG_RTE_NEXT_ABI=n" $conf
+	cmd sed -i -e"$ a\CONFIG_RTE_EAL_IGB_UIO=n" $conf
+	cmd sed -i -e"$ a\CONFIG_RTE_LIBRTE_KNI=n" $conf
+	cmd sed -i -e"$ a\CONFIG_RTE_KNI_KMOD=n" $conf
 }
 
-###########################################
-#START
-############################################
+# build dpdk for the given tag and dump abi
+# $1: hash of the revision
+gen_abi() {
+	cmd git clone $(dirname $0)/.. ${dst}/${1}
+	cmd cd ${dst}/${1}
+
+	log "INFO" "Checking out version ${1} of the dpdk"
+	# Move to the old version of the tree
+	cmd git checkout ${1}
+
+	fixup_config
+
+	# Now configure the build
+	log "INFO" "Configuring DPDK ${1}"
+	cmd make config T=$target O=$target > ${dst}/log 2>&1
+
+	# Checking abi compliance relies on using the dwarf information in
+	# the shared objects. Build with -g to include them.
+	log "INFO" "Building DPDK ${1}. This might take a moment"
+	cmd make -j$parallel O=$target V=1 EXTRA_CFLAGS="-g -O0" \
+	    EXTRA_LDFLAGS="-g" || log "INFO" "The build failed"
+
+	# Move to the lib directory
+	cmd cd ${PWD}/$target/lib
+	log "INFO" "Collecting ABI information for ${1}"
+	for i in *.so; do
+		[ -e "$i" ] || break
+		cmd $abidump ${i} -o $dst/${1}/${i}.dump -lver ${1} || true
+		# hack to ignore empty SymbolsInfo section (no public ABI)
+		if grep -q "'SymbolInfo' => {}," $dst/${1}/${i}.dump \
+				2> /dev/null; then
+			log "INFO" "${i} has no public ABI, remove dump file"
+			cmd rm -f $dst/${1}/${i}.dump
+		fi
+	done
+	cmd cd ../..
+}
 
-#trap on ctrl-c to clean up
-trap cleanup_and_exit SIGINT
+verbose=false
+parallel=1
+dst=${default_dst}
+target=${default_target}
+force=0
+while getopts j:vd:t:fh ARG ; do
+	case $ARG in
+		j ) parallel=$OPTARG ;;
+		v ) verbose=true ;;
+		d ) dst=$OPTARG ;;
+		t ) target=$OPTARG ;;
+		f ) force=1 ;;
+		h ) print_usage ; exit 0 ;;
+		? ) print_usage ; exit 1 ;;
+	esac
+done
+shift $(($OPTIND - 1))
 
-if [ -z "$DPDK_MAKE_JOBS" ]
-then
-	# This counts the number of cpus on the system
-	if [ -e /usr/bin/lscpu ]
-	then
-		DPDK_MAKE_JOBS=`lscpu -p=cpu | grep -v "#" | wc -l`
-	else
-		DPDK_MAKE_JOBS=1
-	fi
+if [ $# != 2 ]; then
+	print_usage
+	exit 1
 fi
 
-#Save the current branch
-CURRENT_BRANCH=`git branch | grep \* | cut -d' ' -f2`
+tag1=$1
+tag2=$2
 
-if [ -z "$CURRENT_BRANCH" ]
-then
-	CURRENT_BRANCH=`git log --pretty=format:%H HEAD~1..HEAD`
-fi
+# convert path to absolute
+case "${dst}" in
+	/*) ;;
+	*) dst=${PWD}/${dst} ;;
+esac
 
-if [ -n "$VERBOSE" ]
-then
-	export VERBOSE=/dev/stdout
-else
-	export VERBOSE=/dev/null
+if [ -e "${dst}" -a "$force" = 0 ]; then
+	echo "The ${dst} directory is not empty. Remove it, use another"
+	echo "one (-d <dir>), or force overriding (-f)"
+	exit 1
 fi
 
-# Validate that we have all the arguments we need
-res=$(validate_args)
-if [ -n "$res" ]
-then
-	echo $res
-	usage
-	cleanup_and_exit 1
-fi
+rm -rf ${dst}
+mkdir -p ${dst}
+set_log_file ${dst}/abi-check.log
+log "INFO" "Logs available in ${dst}/abi-check.log"
 
-HASH1=$(git show -s --format=%H "$TAG1" -- 2> /dev/null | tail -1)
-HASH2=$(git show -s --format=%H "$TAG2" -- 2> /dev/null | tail -1)
+command -v ${abicheck} || log "INFO" "Can't find ${abicheck} utility"
+command -v ${abidump} || log "INFO" "Can't find ${abidump} utility"
 
-# Make sure our tags exist
-res=$(validate_tags)
-if [ -n "$res" ]
-then
-	echo $res
-	cleanup_and_exit 1
-fi
+hash1=$(git show -s --format=%h "$tag1" -- 2> /dev/null | tail -1)
+hash2=$(git show -s --format=%h "$tag2" -- 2> /dev/null | tail -1)
 
 # Make hashes available in output for non-local reference
-TAG1="$TAG1 ($HASH1)"
-TAG2="$TAG2 ($HASH2)"
-
-ABICHECK=`which abi-compliance-checker 2>/dev/null`
-if [ $? -ne 0 ]
-then
-	log "INFO" "Can't find abi-compliance-checker utility"
-	cleanup_and_exit 1
-fi
-
-ABIDUMP=`which abi-dumper 2>/dev/null`
-if [ $? -ne 0 ]
-then
-	log "INFO" "Can't find abi-dumper utility"
-	cleanup_and_exit 1
-fi
+tag1="$tag1 ($hash1)"
+tag2="$tag2 ($hash2)"
 
-log "INFO" "We're going to check and make sure that applications built"
-log "INFO" "against DPDK DSOs from version $TAG1 will still run when executed"
-log "INFO" "against DPDK DSOs built from version $TAG2."
-log "INFO" ""
-
-# Check to make sure we have a clean tree
-git status | grep -q clean
-if [ $? -ne 0 ]
-then
-	log "WARN" "Working directory not clean, aborting"
-	cleanup_and_exit 1
+if [ "$hash1" = "$hash2" ]; then
+	log "ERROR" "$tag1 and $tag2 are the same revisions"
+	exit 1
 fi
 
-# Move to the root of the git tree
-cd $(dirname $0)/..
+cmd mkdir -p ${dst}
 
-log "INFO" "Checking out version $TAG1 of the dpdk"
-# Move to the old version of the tree
-git checkout $HASH1
+# dump abi for each revision
+gen_abi ${hash1}
+gen_abi ${hash2}
 
-fixup_config
+# compare the abi dumps
+ret=0
+list=""
+for i in ${dst}/${hash2}/*.dump; do
+	name=`basename $i`
+	libname=${name%.dump}
 
-# Checking abi compliance relies on using the dwarf information in
-# The shared objects.  Thats only included in the DSO's if we build
-# with -g
-export EXTRA_CFLAGS="$EXTRA_CFLAGS -g -O0"
-export EXTRA_LDFLAGS="$EXTRA_LDFLAGS -g"
-
-# Now configure the build
-log "INFO" "Configuring DPDK $TAG1"
-make config T=$TARGET O=$TARGET > $VERBOSE 2>&1
-
-log "INFO" "Building DPDK $TAG1. This might take a moment"
-make -j$DPDK_MAKE_JOBS O=$TARGET > $VERBOSE 2>&1
-
-if [ $? -ne 0 ]
-then
-	log "INFO" "THE BUILD FAILED.  ABORTING"
-	cleanup_and_exit 1
-fi
+	if [ ! -f $dst/${hash1}/$name ]; then
+		log "INFO" "$NAME does not exist in $tag1. skipping..."
+		continue
+	fi
 
-# Move to the lib directory
-cd $TARGET/lib
-log "INFO" "COLLECTING ABI INFORMATION FOR $TAG1"
-for i in `ls *.so`
-do
-	$ABIDUMP $i -o $ABI_DIR/$i-ABI-0.dump -lver $HASH1
+	local_ret=0
+	cmd $abicheck -l $libname \
+	    -old $dst/${hash1}/$name -new $dst/${hash2}/$name || local_ret=$?
+	if [ $local_ret != 0 ]; then
+		log "NOTICE" "$abicheck returned $local_ret"
+		ret=$local_ret
+		list="$list $libname"
+	fi
 done
-cd ../..
-
-# Now clean the tree, checkout the second tag, and rebuild
-git clean -f -d
-git reset --hard
-# Move to the new version of the tree
-log "INFO" "Checking out version $TAG2 of the dpdk"
-git checkout $HASH2
-
-fixup_config
-
-# Now configure the build
-log "INFO" "Configuring DPDK $TAG2"
-make config T=$TARGET O=$TARGET > $VERBOSE 2>&1
-
-log "INFO" "Building DPDK $TAG2. This might take a moment"
-make -j$DPDK_MAKE_JOBS O=$TARGET > $VERBOSE 2>&1
 
-if [ $? -ne 0 ]
-then
-	log "INFO" "THE BUILD FAILED.  ABORTING"
-	cleanup_and_exit 1
+if [ $ret != 0 ]; then
+	log "NOTICE" "At least one call to $abicheck returned an error."
+	log "NOTICE" "ABI may be incompatible, please check logs for details."
+	log "NOTICE" "Incompatible list: $list"
+else
+	log "NOTICE" "No error detected, ABI is compatible."
 fi
 
-cd $TARGET/lib
-log "INFO" "COLLECTING ABI INFORMATION FOR $TAG2"
-for i in `ls *.so`
-do
-	$ABIDUMP $i -o $ABI_DIR/$i-ABI-1.dump -lver $HASH2
-done
-cd ../..
-
-# Start comparison of ABI dumps
-for i in `ls $ABI_DIR/*-1.dump`
-do
-	NEWNAME=`basename $i`
-	OLDNAME=`basename $i | sed -e"s/1.dump/0.dump/"`
-	LIBNAME=`basename $i | sed -e"s/-ABI-1.dump//"`
-
-	if [ ! -f $ABI_DIR/$OLDNAME ]
-	then
-		log "INFO" "$OLDNAME DOES NOT EXIST IN $TAG1. SKIPPING..."
-	fi
-
-	#compare the abi dumps
-	$ABICHECK -l $LIBNAME -old $ABI_DIR/$OLDNAME -new $ABI_DIR/$NEWNAME
-done
+log "INFO" "Logs are in ${dst}/abi-check.log"
+log "INFO" "HTML reports are in ${dst}/compat_reports directory"
 
-git reset --hard
-log "INFO" "ABI CHECK COMPLETE.  REPORTS ARE IN compat_report directory"
-cleanup_and_exit 0
+exit $ret
-- 
2.11.0

Re: [dpdk-dev] [PATCH] devtools: rework abi checker script

[Bruce Richardson]

On Wed, Aug 30, 2017 at 03:51:54PM +0200, Olivier Matz wrote:
> The intiatial version of the script had some limitations:
> - cannot work on a non-clean workspace
> - environment variables are not documented
> - no compilation log in case of failure
> - return success even it abi is incompatible
> 
> This patch addresses these issues and rework the code.
> 
> Signed-off-by: Olivier Matz <olivier.matz@6wind.com>

Giving this a spin to test it out. First impression is good, gives nice
output of what is happening, though perhaps a little verbose by default.

The output finishes though by printing:
	INFO: HTML reports are in /home/bruce/dpdk-clean/abi-check/compat_reports directory

Unfortunately:
	$ ls -l /home/bruce/dpdk-clean/abi-check/compat_reports

/Bruce

Re: [dpdk-dev] [PATCH] devtools: rework abi checker script

[Bruce Richardson]

On Mon, Sep 04, 2017 at 05:00:21PM +0100, Bruce Richardson wrote:
> On Wed, Aug 30, 2017 at 03:51:54PM +0200, Olivier Matz wrote:
> > The intiatial version of the script had some limitations:
> > - cannot work on a non-clean workspace
> > - environment variables are not documented
> > - no compilation log in case of failure
> > - return success even it abi is incompatible
> > 
> > This patch addresses these issues and rework the code.
> > 
> > Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
> 
> Giving this a spin to test it out. First impression is good, gives nice
> output of what is happening, though perhaps a little verbose by default.
> 
> The output finishes though by printing:
> 	INFO: HTML reports are in /home/bruce/dpdk-clean/abi-check/compat_reports directory
> 
> Unfortunately:
	$ ls -l /home/bruce/dpdk-clean/abi-check/compat_reports
	ls: cannot access '/home/bruce/dpdk-clean/abi-check/compat_reports': No such file or directory

> 
> /Bruce

Re: [dpdk-dev] [PATCH] devtools: rework abi checker script

[Bruce Richardson]

On Mon, Sep 04, 2017 at 05:03:47PM +0100, Bruce Richardson wrote:
> On Mon, Sep 04, 2017 at 05:00:21PM +0100, Bruce Richardson wrote:
> > On Wed, Aug 30, 2017 at 03:51:54PM +0200, Olivier Matz wrote:
> > > The intiatial version of the script had some limitations:
> > > - cannot work on a non-clean workspace
> > > - environment variables are not documented
> > > - no compilation log in case of failure
> > > - return success even it abi is incompatible
> > > 
> > > This patch addresses these issues and rework the code.
> > > 
> > > Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
> > 
> > Giving this a spin to test it out. First impression is good, gives nice
> > output of what is happening, though perhaps a little verbose by default.
> > 
> > The output finishes though by printing:
> > 	INFO: HTML reports are in /home/bruce/dpdk-clean/abi-check/compat_reports directory
> > 
> > Unfortunately:
> 	$ ls -l /home/bruce/dpdk-clean/abi-check/compat_reports
> 	ls: cannot access '/home/bruce/dpdk-clean/abi-check/compat_reports': No such file or directory
> 
> > 
On the plus side, introducing an abi error in a library is detected and
the library in question is reported as part of the output. Still no HTML
reports to be found though.

/Bruce

[dpdk-dev] [PATCH v2] devtools: rework abi checker script

[Olivier Matz]

The intiatial version of the script had some limitations:
- cannot work on a non-clean workspace
- environment variables are not documented
- no compilation log in case of failure
- return success even it abi is incompatible

This patch addresses these issues and rework the code.

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
---

v1->v2:
- use /usr/bin/env to find bash (which is required)
- fix displayed path to html reports
- reword help for -f option

 devtools/validate-abi.sh | 389 ++++++++++++++++++++++++-----------------------
 1 file changed, 197 insertions(+), 192 deletions(-)

diff --git a/devtools/validate-abi.sh b/devtools/validate-abi.sh
index 0accc99b1..d747db189 100755
--- a/devtools/validate-abi.sh
+++ b/devtools/validate-abi.sh
@@ -1,7 +1,8 @@
-#!/bin/sh
+#!/usr/bin/env bash
 #   BSD LICENSE
 #
 #   Copyright(c) 2015 Neil Horman. All rights reserved.
+#   Copyright(c) 2017 6WIND S.A.
 #   All rights reserved.
 #
 #   Redistribution and use in source and binary forms, with or without
@@ -27,236 +28,240 @@
 #   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 #   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-TAG1=$1
-TAG2=$2
-TARGET=$3
-ABI_DIR=`mktemp -d -p /tmp ABI.XXXXXX`
+set -e
 
-usage() {
-	echo "$0 <REV1> <REV2> <TARGET>"
-}
+abicheck=abi-compliance-checker
+abidump=abi-dumper
+default_dst=abi-check
+default_target=x86_64-native-linuxapp-gcc
 
-log() {
-	local level=$1
-	shift
-	echo "$*"
+# trap on error
+err_report() {
+    echo "$0: error at line $1"
 }
+trap 'err_report $LINENO' ERR
 
-validate_tags() {
+print_usage () {
+	cat <<- END_OF_HELP
+	$(basename $0) [options] <rev1> <rev2>
 
-	if [ -z "$HASH1" ]
-	then
-		echo "invalid revision: $TAG1"
-		return
-	fi
-	if [ -z "$HASH2" ]
-	then
-		echo "invalid revision: $TAG2"
-		return
-	fi
+	This script compares the ABI of 2 git revisions of the current
+	workspace. The output is a html report and a compilation log.
+
+	The objective is to make sure that applications built against
+	DSOs from the first revision can still run when executed using
+	the DSOs built from the second revision.
+
+	<rev1> and <rev2> are git commit id or tags.
+
+	Options:
+	  -h		show this help
+	  -j <num>	enable parallel compilation with <num> threads
+	  -v		show compilation logs on the console
+	  -d <dir>	change working directory (default is ${default_dst})
+	  -t <target>	the dpdk target to use (default is ${default_target})
+	  -f		overwrite existing files in destination directory
+
+	The script returns 0 on success, or the value of last failing
+	call of ${abicheck} (incompatible abi or the tool has run with errors).
+	The errors returned by ${abidump} are ignored.
+
+	END_OF_HELP
 }
 
-validate_args() {
-	if [ -z "$TAG1" ]
-	then
-		echo "Must Specify REV1"
-		return
-	fi
-	if [ -z "$TAG2" ]
-	then
-		echo "Must Specify REV2"
-		return
-	fi
-	if [ -z "$TARGET" ]
-	then
-		echo "Must Specify a build target"
+# log in the file, and on stdout if verbose
+# $1: level string
+# $2: string to be logged
+log() {
+	echo "$1: $2"
+	if [ "${verbose}" != "true" ]; then
+		echo "$1: $2" >&3
 	fi
 }
 
+# launch a command and log it, taking care of surrounding spaces with quotes
+cmd() {
+	local i s whitespace
+	s=""
+	whitespace="[[:space:]]"
+	for i in "$@"; do
+		if [[ $i =~ $whitespace ]]; then
+			i=\"$i\"
+		fi
+		if [ -z "$s" ]; then
+			s="$i"
+		else
+			s="$s $i"
+		fi
+	done
+
+	log "CMD" "$s"
+	"$@"
+}
 
-cleanup_and_exit() {
-	rm -rf $ABI_DIR
-	git checkout $CURRENT_BRANCH
-	exit $1
+# redirect or copy stderr/stdout to a file
+# the syntax is unfamiliar, but it makes the rest of the
+# code easier to read, avoiding the use of pipes
+set_log_file() {
+	# save original stdout and stderr in fd 3 and 4
+	exec 3>&1
+	exec 4>&2
+	# create a new fd 5 that send to a file
+	exec 5> >(cat > $1)
+	# send stdout and stderr to fd 5
+	if [ "${verbose}" = "true" ]; then
+		exec 1> >(tee /dev/fd/5 >&3)
+		exec 2> >(tee /dev/fd/5 >&4)
+	else
+		exec 1>&5
+		exec 2>&5
+	fi
 }
 
 # Make sure we configure SHARED libraries
 # Also turn off IGB and KNI as those require kernel headers to build
 fixup_config() {
-	sed -i -e"$ a\CONFIG_RTE_BUILD_SHARED_LIB=y" config/defconfig_$TARGET
-	sed -i -e"$ a\CONFIG_RTE_NEXT_ABI=n" config/defconfig_$TARGET
-	sed -i -e"$ a\CONFIG_RTE_EAL_IGB_UIO=n" config/defconfig_$TARGET
-	sed -i -e"$ a\CONFIG_RTE_LIBRTE_KNI=n" config/defconfig_$TARGET
-	sed -i -e"$ a\CONFIG_RTE_KNI_KMOD=n" config/defconfig_$TARGET
+	local conf=config/defconfig_$target
+	cmd sed -i -e"$ a\CONFIG_RTE_BUILD_SHARED_LIB=y" $conf
+	cmd sed -i -e"$ a\CONFIG_RTE_NEXT_ABI=n" $conf
+	cmd sed -i -e"$ a\CONFIG_RTE_EAL_IGB_UIO=n" $conf
+	cmd sed -i -e"$ a\CONFIG_RTE_LIBRTE_KNI=n" $conf
+	cmd sed -i -e"$ a\CONFIG_RTE_KNI_KMOD=n" $conf
 }
 
-###########################################
-#START
-############################################
+# build dpdk for the given tag and dump abi
+# $1: hash of the revision
+gen_abi() {
+	cmd git clone $(dirname $0)/.. ${dst}/${1}
+	cmd cd ${dst}/${1}
+
+	log "INFO" "Checking out version ${1} of the dpdk"
+	# Move to the old version of the tree
+	cmd git checkout ${1}
+
+	fixup_config
+
+	# Now configure the build
+	log "INFO" "Configuring DPDK ${1}"
+	cmd make config T=$target O=$target > ${dst}/log 2>&1
+
+	# Checking abi compliance relies on using the dwarf information in
+	# the shared objects. Build with -g to include them.
+	log "INFO" "Building DPDK ${1}. This might take a moment"
+	cmd make -j$parallel O=$target V=1 EXTRA_CFLAGS="-g -O0" \
+	    EXTRA_LDFLAGS="-g" || log "INFO" "The build failed"
+
+	# Move to the lib directory
+	cmd cd ${PWD}/$target/lib
+	log "INFO" "Collecting ABI information for ${1}"
+	for i in *.so; do
+		[ -e "$i" ] || break
+		cmd $abidump ${i} -o $dst/${1}/${i}.dump -lver ${1} || true
+		# hack to ignore empty SymbolsInfo section (no public ABI)
+		if grep -q "'SymbolInfo' => {}," $dst/${1}/${i}.dump \
+				2> /dev/null; then
+			log "INFO" "${i} has no public ABI, remove dump file"
+			cmd rm -f $dst/${1}/${i}.dump
+		fi
+	done
+	cmd cd ../..
+}
 
-#trap on ctrl-c to clean up
-trap cleanup_and_exit SIGINT
+verbose=false
+parallel=1
+dst=${default_dst}
+target=${default_target}
+force=0
+while getopts j:vd:t:fh ARG ; do
+	case $ARG in
+		j ) parallel=$OPTARG ;;
+		v ) verbose=true ;;
+		d ) dst=$OPTARG ;;
+		t ) target=$OPTARG ;;
+		f ) force=1 ;;
+		h ) print_usage ; exit 0 ;;
+		? ) print_usage ; exit 1 ;;
+	esac
+done
+shift $(($OPTIND - 1))
 
-if [ -z "$DPDK_MAKE_JOBS" ]
-then
-	# This counts the number of cpus on the system
-	if [ -e /usr/bin/lscpu ]
-	then
-		DPDK_MAKE_JOBS=`lscpu -p=cpu | grep -v "#" | wc -l`
-	else
-		DPDK_MAKE_JOBS=1
-	fi
+if [ $# != 2 ]; then
+	print_usage
+	exit 1
 fi
 
-#Save the current branch
-CURRENT_BRANCH=`git branch | grep \* | cut -d' ' -f2`
+tag1=$1
+tag2=$2
 
-if [ -z "$CURRENT_BRANCH" ]
-then
-	CURRENT_BRANCH=`git log --pretty=format:%H HEAD~1..HEAD`
-fi
+# convert path to absolute
+case "${dst}" in
+	/*) ;;
+	*) dst=${PWD}/${dst} ;;
+esac
 
-if [ -n "$VERBOSE" ]
-then
-	export VERBOSE=/dev/stdout
-else
-	export VERBOSE=/dev/null
+if [ -e "${dst}" -a "$force" = 0 ]; then
+	echo "The ${dst} directory is not empty. Remove it, use another"
+	echo "one (-d <dir>), or force overriding (-f)"
+	exit 1
 fi
 
-# Validate that we have all the arguments we need
-res=$(validate_args)
-if [ -n "$res" ]
-then
-	echo $res
-	usage
-	cleanup_and_exit 1
-fi
+rm -rf ${dst}
+mkdir -p ${dst}
+set_log_file ${dst}/abi-check.log
+log "INFO" "Logs available in ${dst}/abi-check.log"
 
-HASH1=$(git show -s --format=%H "$TAG1" -- 2> /dev/null | tail -1)
-HASH2=$(git show -s --format=%H "$TAG2" -- 2> /dev/null | tail -1)
+command -v ${abicheck} || log "INFO" "Can't find ${abicheck} utility"
+command -v ${abidump} || log "INFO" "Can't find ${abidump} utility"
 
-# Make sure our tags exist
-res=$(validate_tags)
-if [ -n "$res" ]
-then
-	echo $res
-	cleanup_and_exit 1
-fi
+hash1=$(git show -s --format=%h "$tag1" -- 2> /dev/null | tail -1)
+hash2=$(git show -s --format=%h "$tag2" -- 2> /dev/null | tail -1)
 
 # Make hashes available in output for non-local reference
-TAG1="$TAG1 ($HASH1)"
-TAG2="$TAG2 ($HASH2)"
-
-ABICHECK=`which abi-compliance-checker 2>/dev/null`
-if [ $? -ne 0 ]
-then
-	log "INFO" "Can't find abi-compliance-checker utility"
-	cleanup_and_exit 1
-fi
-
-ABIDUMP=`which abi-dumper 2>/dev/null`
-if [ $? -ne 0 ]
-then
-	log "INFO" "Can't find abi-dumper utility"
-	cleanup_and_exit 1
-fi
+tag1="$tag1 ($hash1)"
+tag2="$tag2 ($hash2)"
 
-log "INFO" "We're going to check and make sure that applications built"
-log "INFO" "against DPDK DSOs from version $TAG1 will still run when executed"
-log "INFO" "against DPDK DSOs built from version $TAG2."
-log "INFO" ""
-
-# Check to make sure we have a clean tree
-git status | grep -q clean
-if [ $? -ne 0 ]
-then
-	log "WARN" "Working directory not clean, aborting"
-	cleanup_and_exit 1
+if [ "$hash1" = "$hash2" ]; then
+	log "ERROR" "$tag1 and $tag2 are the same revisions"
+	exit 1
 fi
 
-# Move to the root of the git tree
-cd $(dirname $0)/..
+cmd mkdir -p ${dst}
 
-log "INFO" "Checking out version $TAG1 of the dpdk"
-# Move to the old version of the tree
-git checkout $HASH1
+# dump abi for each revision
+gen_abi ${hash1}
+gen_abi ${hash2}
 
-fixup_config
+# compare the abi dumps
+ret=0
+list=""
+for i in ${dst}/${hash2}/*.dump; do
+	name=`basename $i`
+	libname=${name%.dump}
 
-# Checking abi compliance relies on using the dwarf information in
-# The shared objects.  Thats only included in the DSO's if we build
-# with -g
-export EXTRA_CFLAGS="$EXTRA_CFLAGS -g -O0"
-export EXTRA_LDFLAGS="$EXTRA_LDFLAGS -g"
-
-# Now configure the build
-log "INFO" "Configuring DPDK $TAG1"
-make config T=$TARGET O=$TARGET > $VERBOSE 2>&1
-
-log "INFO" "Building DPDK $TAG1. This might take a moment"
-make -j$DPDK_MAKE_JOBS O=$TARGET > $VERBOSE 2>&1
-
-if [ $? -ne 0 ]
-then
-	log "INFO" "THE BUILD FAILED.  ABORTING"
-	cleanup_and_exit 1
-fi
+	if [ ! -f $dst/${hash1}/$name ]; then
+		log "INFO" "$NAME does not exist in $tag1. skipping..."
+		continue
+	fi
 
-# Move to the lib directory
-cd $TARGET/lib
-log "INFO" "COLLECTING ABI INFORMATION FOR $TAG1"
-for i in `ls *.so`
-do
-	$ABIDUMP $i -o $ABI_DIR/$i-ABI-0.dump -lver $HASH1
+	local_ret=0
+	cmd $abicheck -l $libname \
+	    -old $dst/${hash1}/$name -new $dst/${hash2}/$name || local_ret=$?
+	if [ $local_ret != 0 ]; then
+		log "NOTICE" "$abicheck returned $local_ret"
+		ret=$local_ret
+		list="$list $libname"
+	fi
 done
-cd ../..
-
-# Now clean the tree, checkout the second tag, and rebuild
-git clean -f -d
-git reset --hard
-# Move to the new version of the tree
-log "INFO" "Checking out version $TAG2 of the dpdk"
-git checkout $HASH2
-
-fixup_config
-
-# Now configure the build
-log "INFO" "Configuring DPDK $TAG2"
-make config T=$TARGET O=$TARGET > $VERBOSE 2>&1
-
-log "INFO" "Building DPDK $TAG2. This might take a moment"
-make -j$DPDK_MAKE_JOBS O=$TARGET > $VERBOSE 2>&1
 
-if [ $? -ne 0 ]
-then
-	log "INFO" "THE BUILD FAILED.  ABORTING"
-	cleanup_and_exit 1
+if [ $ret != 0 ]; then
+	log "NOTICE" "At least one call to $abicheck returned an error."
+	log "NOTICE" "ABI may be incompatible, please check logs for details."
+	log "NOTICE" "Incompatible list: $list"
+else
+	log "NOTICE" "No error detected, ABI is compatible."
 fi
 
-cd $TARGET/lib
-log "INFO" "COLLECTING ABI INFORMATION FOR $TAG2"
-for i in `ls *.so`
-do
-	$ABIDUMP $i -o $ABI_DIR/$i-ABI-1.dump -lver $HASH2
-done
-cd ../..
-
-# Start comparison of ABI dumps
-for i in `ls $ABI_DIR/*-1.dump`
-do
-	NEWNAME=`basename $i`
-	OLDNAME=`basename $i | sed -e"s/1.dump/0.dump/"`
-	LIBNAME=`basename $i | sed -e"s/-ABI-1.dump//"`
-
-	if [ ! -f $ABI_DIR/$OLDNAME ]
-	then
-		log "INFO" "$OLDNAME DOES NOT EXIST IN $TAG1. SKIPPING..."
-	fi
-
-	#compare the abi dumps
-	$ABICHECK -l $LIBNAME -old $ABI_DIR/$OLDNAME -new $ABI_DIR/$NEWNAME
-done
+log "INFO" "Logs are in ${dst}/abi-check.log"
+log "INFO" "HTML reports are in ${dst}/${hash2}/compat_reports directory"
 
-git reset --hard
-log "INFO" "ABI CHECK COMPLETE.  REPORTS ARE IN compat_report directory"
-cleanup_and_exit 0
+exit $ret
-- 
2.11.0

Re: [dpdk-dev] [PATCH v2] devtools: rework abi checker script

[Neil Horman]

On Wed, Sep 06, 2017 at 04:51:01PM +0200, Olivier Matz wrote:
> The intiatial version of the script had some limitations:
> - cannot work on a non-clean workspace
> - environment variables are not documented
> - no compilation log in case of failure
> - return success even it abi is incompatible
> 
> This patch addresses these issues and rework the code.
> 
> Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
> ---
> 
> v1->v2:
> - use /usr/bin/env to find bash (which is required)
> - fix displayed path to html reports
> - reword help for -f option
> 
This still doesn't seem to work.  Running the following:
./validate-abi.sh v17.05 v17.08

produces no report, and the end of the abi-check.log file contains:

[nhorman@hmswarspite abi-check]$ tail -n 10 ./abi-check.log 
CMD: abi-dumper librte_vhost.so -o /home/nhorman/git/dpdk/devtools/abi-check/222555480/librte_vhost.so.dump -lver 222555480
Reading debug-info
WARNING: incompatible build option detected: -O0 (required -Og for better analysis)
Creating ABI dump

The object ABI has been dumped to:
  /home/nhorman/git/dpdk/devtools/abi-check/222555480/librte_vhost.so.dump
CMD: cd ../..
CMD: git clone ./.. /home/nhorman/git/dpdk/devtools/abi-check/02657b4ad
fatal: repository './..' does not exist

The warning I assume should be fixed to, but the second clone failing seems to
be the most salient bit here

Neil

>  devtools/validate-abi.sh | 389 ++++++++++++++++++++++++-----------------------
>  1 file changed, 197 insertions(+), 192 deletions(-)
> 
> diff --git a/devtools/validate-abi.sh b/devtools/validate-abi.sh
> index 0accc99b1..d747db189 100755
> --- a/devtools/validate-abi.sh
> +++ b/devtools/validate-abi.sh
> @@ -1,7 +1,8 @@
> -#!/bin/sh
> +#!/usr/bin/env bash
>  #   BSD LICENSE
>  #
>  #   Copyright(c) 2015 Neil Horman. All rights reserved.
> +#   Copyright(c) 2017 6WIND S.A.
>  #   All rights reserved.
>  #
>  #   Redistribution and use in source and binary forms, with or without
> @@ -27,236 +28,240 @@
>  #   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
>  #   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
>  
> -TAG1=$1
> -TAG2=$2
> -TARGET=$3
> -ABI_DIR=`mktemp -d -p /tmp ABI.XXXXXX`
> +set -e
>  
> -usage() {
> -	echo "$0 <REV1> <REV2> <TARGET>"
> -}
> +abicheck=abi-compliance-checker
> +abidump=abi-dumper
> +default_dst=abi-check
> +default_target=x86_64-native-linuxapp-gcc
>  
> -log() {
> -	local level=$1
> -	shift
> -	echo "$*"
> +# trap on error
> +err_report() {
> +    echo "$0: error at line $1"
>  }
> +trap 'err_report $LINENO' ERR
>  
> -validate_tags() {
> +print_usage () {
> +	cat <<- END_OF_HELP
> +	$(basename $0) [options] <rev1> <rev2>
>  
> -	if [ -z "$HASH1" ]
> -	then
> -		echo "invalid revision: $TAG1"
> -		return
> -	fi
> -	if [ -z "$HASH2" ]
> -	then
> -		echo "invalid revision: $TAG2"
> -		return
> -	fi
> +	This script compares the ABI of 2 git revisions of the current
> +	workspace. The output is a html report and a compilation log.
> +
> +	The objective is to make sure that applications built against
> +	DSOs from the first revision can still run when executed using
> +	the DSOs built from the second revision.
> +
> +	<rev1> and <rev2> are git commit id or tags.
> +
> +	Options:
> +	  -h		show this help
> +	  -j <num>	enable parallel compilation with <num> threads
> +	  -v		show compilation logs on the console
> +	  -d <dir>	change working directory (default is ${default_dst})
> +	  -t <target>	the dpdk target to use (default is ${default_target})
> +	  -f		overwrite existing files in destination directory
> +
> +	The script returns 0 on success, or the value of last failing
> +	call of ${abicheck} (incompatible abi or the tool has run with errors).
> +	The errors returned by ${abidump} are ignored.
> +
> +	END_OF_HELP
>  }
>  
> -validate_args() {
> -	if [ -z "$TAG1" ]
> -	then
> -		echo "Must Specify REV1"
> -		return
> -	fi
> -	if [ -z "$TAG2" ]
> -	then
> -		echo "Must Specify REV2"
> -		return
> -	fi
> -	if [ -z "$TARGET" ]
> -	then
> -		echo "Must Specify a build target"
> +# log in the file, and on stdout if verbose
> +# $1: level string
> +# $2: string to be logged
> +log() {
> +	echo "$1: $2"
> +	if [ "${verbose}" != "true" ]; then
> +		echo "$1: $2" >&3
>  	fi
>  }
>  
> +# launch a command and log it, taking care of surrounding spaces with quotes
> +cmd() {
> +	local i s whitespace
> +	s=""
> +	whitespace="[[:space:]]"
> +	for i in "$@"; do
> +		if [[ $i =~ $whitespace ]]; then
> +			i=\"$i\"
> +		fi
> +		if [ -z "$s" ]; then
> +			s="$i"
> +		else
> +			s="$s $i"
> +		fi
> +	done
> +
> +	log "CMD" "$s"
> +	"$@"
> +}
>  
> -cleanup_and_exit() {
> -	rm -rf $ABI_DIR
> -	git checkout $CURRENT_BRANCH
> -	exit $1
> +# redirect or copy stderr/stdout to a file
> +# the syntax is unfamiliar, but it makes the rest of the
> +# code easier to read, avoiding the use of pipes
> +set_log_file() {
> +	# save original stdout and stderr in fd 3 and 4
> +	exec 3>&1
> +	exec 4>&2
> +	# create a new fd 5 that send to a file
> +	exec 5> >(cat > $1)
> +	# send stdout and stderr to fd 5
> +	if [ "${verbose}" = "true" ]; then
> +		exec 1> >(tee /dev/fd/5 >&3)
> +		exec 2> >(tee /dev/fd/5 >&4)
> +	else
> +		exec 1>&5
> +		exec 2>&5
> +	fi
>  }
>  
>  # Make sure we configure SHARED libraries
>  # Also turn off IGB and KNI as those require kernel headers to build
>  fixup_config() {
> -	sed -i -e"$ a\CONFIG_RTE_BUILD_SHARED_LIB=y" config/defconfig_$TARGET
> -	sed -i -e"$ a\CONFIG_RTE_NEXT_ABI=n" config/defconfig_$TARGET
> -	sed -i -e"$ a\CONFIG_RTE_EAL_IGB_UIO=n" config/defconfig_$TARGET
> -	sed -i -e"$ a\CONFIG_RTE_LIBRTE_KNI=n" config/defconfig_$TARGET
> -	sed -i -e"$ a\CONFIG_RTE_KNI_KMOD=n" config/defconfig_$TARGET
> +	local conf=config/defconfig_$target
> +	cmd sed -i -e"$ a\CONFIG_RTE_BUILD_SHARED_LIB=y" $conf
> +	cmd sed -i -e"$ a\CONFIG_RTE_NEXT_ABI=n" $conf
> +	cmd sed -i -e"$ a\CONFIG_RTE_EAL_IGB_UIO=n" $conf
> +	cmd sed -i -e"$ a\CONFIG_RTE_LIBRTE_KNI=n" $conf
> +	cmd sed -i -e"$ a\CONFIG_RTE_KNI_KMOD=n" $conf
>  }
>  
> -###########################################
> -#START
> -############################################
> +# build dpdk for the given tag and dump abi
> +# $1: hash of the revision
> +gen_abi() {
> +	cmd git clone $(dirname $0)/.. ${dst}/${1}
> +	cmd cd ${dst}/${1}
> +
> +	log "INFO" "Checking out version ${1} of the dpdk"
> +	# Move to the old version of the tree
> +	cmd git checkout ${1}
> +
> +	fixup_config
> +
> +	# Now configure the build
> +	log "INFO" "Configuring DPDK ${1}"
> +	cmd make config T=$target O=$target > ${dst}/log 2>&1
> +
> +	# Checking abi compliance relies on using the dwarf information in
> +	# the shared objects. Build with -g to include them.
> +	log "INFO" "Building DPDK ${1}. This might take a moment"
> +	cmd make -j$parallel O=$target V=1 EXTRA_CFLAGS="-g -O0" \
> +	    EXTRA_LDFLAGS="-g" || log "INFO" "The build failed"
> +
> +	# Move to the lib directory
> +	cmd cd ${PWD}/$target/lib
> +	log "INFO" "Collecting ABI information for ${1}"
> +	for i in *.so; do
> +		[ -e "$i" ] || break
> +		cmd $abidump ${i} -o $dst/${1}/${i}.dump -lver ${1} || true
> +		# hack to ignore empty SymbolsInfo section (no public ABI)
> +		if grep -q "'SymbolInfo' => {}," $dst/${1}/${i}.dump \
> +				2> /dev/null; then
> +			log "INFO" "${i} has no public ABI, remove dump file"
> +			cmd rm -f $dst/${1}/${i}.dump
> +		fi
> +	done
> +	cmd cd ../..
> +}
>  
> -#trap on ctrl-c to clean up
> -trap cleanup_and_exit SIGINT
> +verbose=false
> +parallel=1
> +dst=${default_dst}
> +target=${default_target}
> +force=0
> +while getopts j:vd:t:fh ARG ; do
> +	case $ARG in
> +		j ) parallel=$OPTARG ;;
> +		v ) verbose=true ;;
> +		d ) dst=$OPTARG ;;
> +		t ) target=$OPTARG ;;
> +		f ) force=1 ;;
> +		h ) print_usage ; exit 0 ;;
> +		? ) print_usage ; exit 1 ;;
> +	esac
> +done
> +shift $(($OPTIND - 1))
>  
> -if [ -z "$DPDK_MAKE_JOBS" ]
> -then
> -	# This counts the number of cpus on the system
> -	if [ -e /usr/bin/lscpu ]
> -	then
> -		DPDK_MAKE_JOBS=`lscpu -p=cpu | grep -v "#" | wc -l`
> -	else
> -		DPDK_MAKE_JOBS=1
> -	fi
> +if [ $# != 2 ]; then
> +	print_usage
> +	exit 1
>  fi
>  
> -#Save the current branch
> -CURRENT_BRANCH=`git branch | grep \* | cut -d' ' -f2`
> +tag1=$1
> +tag2=$2
>  
> -if [ -z "$CURRENT_BRANCH" ]
> -then
> -	CURRENT_BRANCH=`git log --pretty=format:%H HEAD~1..HEAD`
> -fi
> +# convert path to absolute
> +case "${dst}" in
> +	/*) ;;
> +	*) dst=${PWD}/${dst} ;;
> +esac
>  
> -if [ -n "$VERBOSE" ]
> -then
> -	export VERBOSE=/dev/stdout
> -else
> -	export VERBOSE=/dev/null
> +if [ -e "${dst}" -a "$force" = 0 ]; then
> +	echo "The ${dst} directory is not empty. Remove it, use another"
> +	echo "one (-d <dir>), or force overriding (-f)"
> +	exit 1
>  fi
>  
> -# Validate that we have all the arguments we need
> -res=$(validate_args)
> -if [ -n "$res" ]
> -then
> -	echo $res
> -	usage
> -	cleanup_and_exit 1
> -fi
> +rm -rf ${dst}
> +mkdir -p ${dst}
> +set_log_file ${dst}/abi-check.log
> +log "INFO" "Logs available in ${dst}/abi-check.log"
>  
> -HASH1=$(git show -s --format=%H "$TAG1" -- 2> /dev/null | tail -1)
> -HASH2=$(git show -s --format=%H "$TAG2" -- 2> /dev/null | tail -1)
> +command -v ${abicheck} || log "INFO" "Can't find ${abicheck} utility"
> +command -v ${abidump} || log "INFO" "Can't find ${abidump} utility"
>  
> -# Make sure our tags exist
> -res=$(validate_tags)
> -if [ -n "$res" ]
> -then
> -	echo $res
> -	cleanup_and_exit 1
> -fi
> +hash1=$(git show -s --format=%h "$tag1" -- 2> /dev/null | tail -1)
> +hash2=$(git show -s --format=%h "$tag2" -- 2> /dev/null | tail -1)
>  
>  # Make hashes available in output for non-local reference
> -TAG1="$TAG1 ($HASH1)"
> -TAG2="$TAG2 ($HASH2)"
> -
> -ABICHECK=`which abi-compliance-checker 2>/dev/null`
> -if [ $? -ne 0 ]
> -then
> -	log "INFO" "Can't find abi-compliance-checker utility"
> -	cleanup_and_exit 1
> -fi
> -
> -ABIDUMP=`which abi-dumper 2>/dev/null`
> -if [ $? -ne 0 ]
> -then
> -	log "INFO" "Can't find abi-dumper utility"
> -	cleanup_and_exit 1
> -fi
> +tag1="$tag1 ($hash1)"
> +tag2="$tag2 ($hash2)"
>  
> -log "INFO" "We're going to check and make sure that applications built"
> -log "INFO" "against DPDK DSOs from version $TAG1 will still run when executed"
> -log "INFO" "against DPDK DSOs built from version $TAG2."
> -log "INFO" ""
> -
> -# Check to make sure we have a clean tree
> -git status | grep -q clean
> -if [ $? -ne 0 ]
> -then
> -	log "WARN" "Working directory not clean, aborting"
> -	cleanup_and_exit 1
> +if [ "$hash1" = "$hash2" ]; then
> +	log "ERROR" "$tag1 and $tag2 are the same revisions"
> +	exit 1
>  fi
>  
> -# Move to the root of the git tree
> -cd $(dirname $0)/..
> +cmd mkdir -p ${dst}
>  
> -log "INFO" "Checking out version $TAG1 of the dpdk"
> -# Move to the old version of the tree
> -git checkout $HASH1
> +# dump abi for each revision
> +gen_abi ${hash1}
> +gen_abi ${hash2}
>  
> -fixup_config
> +# compare the abi dumps
> +ret=0
> +list=""
> +for i in ${dst}/${hash2}/*.dump; do
> +	name=`basename $i`
> +	libname=${name%.dump}
>  
> -# Checking abi compliance relies on using the dwarf information in
> -# The shared objects.  Thats only included in the DSO's if we build
> -# with -g
> -export EXTRA_CFLAGS="$EXTRA_CFLAGS -g -O0"
> -export EXTRA_LDFLAGS="$EXTRA_LDFLAGS -g"
> -
> -# Now configure the build
> -log "INFO" "Configuring DPDK $TAG1"
> -make config T=$TARGET O=$TARGET > $VERBOSE 2>&1
> -
> -log "INFO" "Building DPDK $TAG1. This might take a moment"
> -make -j$DPDK_MAKE_JOBS O=$TARGET > $VERBOSE 2>&1
> -
> -if [ $? -ne 0 ]
> -then
> -	log "INFO" "THE BUILD FAILED.  ABORTING"
> -	cleanup_and_exit 1
> -fi
> +	if [ ! -f $dst/${hash1}/$name ]; then
> +		log "INFO" "$NAME does not exist in $tag1. skipping..."
> +		continue
> +	fi
>  
> -# Move to the lib directory
> -cd $TARGET/lib
> -log "INFO" "COLLECTING ABI INFORMATION FOR $TAG1"
> -for i in `ls *.so`
> -do
> -	$ABIDUMP $i -o $ABI_DIR/$i-ABI-0.dump -lver $HASH1
> +	local_ret=0
> +	cmd $abicheck -l $libname \
> +	    -old $dst/${hash1}/$name -new $dst/${hash2}/$name || local_ret=$?
> +	if [ $local_ret != 0 ]; then
> +		log "NOTICE" "$abicheck returned $local_ret"
> +		ret=$local_ret
> +		list="$list $libname"
> +	fi
>  done
> -cd ../..
> -
> -# Now clean the tree, checkout the second tag, and rebuild
> -git clean -f -d
> -git reset --hard
> -# Move to the new version of the tree
> -log "INFO" "Checking out version $TAG2 of the dpdk"
> -git checkout $HASH2
> -
> -fixup_config
> -
> -# Now configure the build
> -log "INFO" "Configuring DPDK $TAG2"
> -make config T=$TARGET O=$TARGET > $VERBOSE 2>&1
> -
> -log "INFO" "Building DPDK $TAG2. This might take a moment"
> -make -j$DPDK_MAKE_JOBS O=$TARGET > $VERBOSE 2>&1
>  
> -if [ $? -ne 0 ]
> -then
> -	log "INFO" "THE BUILD FAILED.  ABORTING"
> -	cleanup_and_exit 1
> +if [ $ret != 0 ]; then
> +	log "NOTICE" "At least one call to $abicheck returned an error."
> +	log "NOTICE" "ABI may be incompatible, please check logs for details."
> +	log "NOTICE" "Incompatible list: $list"
> +else
> +	log "NOTICE" "No error detected, ABI is compatible."
>  fi
>  
> -cd $TARGET/lib
> -log "INFO" "COLLECTING ABI INFORMATION FOR $TAG2"
> -for i in `ls *.so`
> -do
> -	$ABIDUMP $i -o $ABI_DIR/$i-ABI-1.dump -lver $HASH2
> -done
> -cd ../..
> -
> -# Start comparison of ABI dumps
> -for i in `ls $ABI_DIR/*-1.dump`
> -do
> -	NEWNAME=`basename $i`
> -	OLDNAME=`basename $i | sed -e"s/1.dump/0.dump/"`
> -	LIBNAME=`basename $i | sed -e"s/-ABI-1.dump//"`
> -
> -	if [ ! -f $ABI_DIR/$OLDNAME ]
> -	then
> -		log "INFO" "$OLDNAME DOES NOT EXIST IN $TAG1. SKIPPING..."
> -	fi
> -
> -	#compare the abi dumps
> -	$ABICHECK -l $LIBNAME -old $ABI_DIR/$OLDNAME -new $ABI_DIR/$NEWNAME
> -done
> +log "INFO" "Logs are in ${dst}/abi-check.log"
> +log "INFO" "HTML reports are in ${dst}/${hash2}/compat_reports directory"
>  
> -git reset --hard
> -log "INFO" "ABI CHECK COMPLETE.  REPORTS ARE IN compat_report directory"
> -cleanup_and_exit 0
> +exit $ret
> -- 
> 2.11.0
> 
> 

Re: [dpdk-dev] [PATCH v2] devtools: rework abi checker script

[Olivier MATZ]

Hello Neil,

On Fri, Sep 08, 2017 at 09:46:49AM -0400, Neil Horman wrote:
> On Wed, Sep 06, 2017 at 04:51:01PM +0200, Olivier Matz wrote:
> > The intiatial version of the script had some limitations:
> > - cannot work on a non-clean workspace
> > - environment variables are not documented
> > - no compilation log in case of failure
> > - return success even it abi is incompatible
> > 
> > This patch addresses these issues and rework the code.
> > 
> > Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
> > ---
> > 
> > v1->v2:
> > - use /usr/bin/env to find bash (which is required)
> > - fix displayed path to html reports
> > - reword help for -f option
> > 
> This still doesn't seem to work.  Running the following:
> ./validate-abi.sh v17.05 v17.08
> 
> produces no report, and the end of the abi-check.log file contains:
> 
> [nhorman@hmswarspite abi-check]$ tail -n 10 ./abi-check.log 
> CMD: abi-dumper librte_vhost.so -o /home/nhorman/git/dpdk/devtools/abi-check/222555480/librte_vhost.so.dump -lver 222555480
> Reading debug-info
> WARNING: incompatible build option detected: -O0 (required -Og for better analysis)
> Creating ABI dump
> 
> The object ABI has been dumped to:
>   /home/nhorman/git/dpdk/devtools/abi-check/222555480/librte_vhost.so.dump
> CMD: cd ../..
> CMD: git clone ./.. /home/nhorman/git/dpdk/devtools/abi-check/02657b4ad
> fatal: repository './..' does not exist
> 
> The warning I assume should be fixed to, but the second clone failing seems to
> be the most salient bit here

Thanks for testing. The script was not behaving well when not started
from dpdk root dir. It's fixed, I'm sending a v3.

I changed the -O0 into -Og, and I also had to append -Wno-error because the
compilation fails with -Og (variable may be used uninitialized). I'll send
another patch to fix it.

Some warnings are still displayed: these are false positive from abi-dumper.
The compilation flags are "[...] -O3 [...] -Og [...]". The second -O switch
overrides the first one, but it is not properly detected. It could be
workarounded by setting a global optimization level (which does not exist yet)
instead of overring it through EXTRA_CFLAGS.

Olivier

[dpdk-dev] [PATCH v3] devtools: rework abi checker script

[Olivier Matz]

The initial version of the script had some limitations:
- cannot work on a non-clean workspace
- environment variables are not documented
- no compilation log in case of failure
- return success even it abi is incompatible

This patch addresses these issues and rework the code.

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
---

v2->v3:
- fix when not launched from dpdk root dir
- use "-Og -Wno-error" instead of "-O0"
- fix typo in commit log

v1->v2:
- use /usr/bin/env to find bash (which is required)
- fix displayed path to html reports
- reword help for -f option

 devtools/validate-abi.sh | 392 ++++++++++++++++++++++++-----------------------
 1 file changed, 200 insertions(+), 192 deletions(-)

diff --git a/devtools/validate-abi.sh b/devtools/validate-abi.sh
index 0accc99b1..8a512aa3b 100755
--- a/devtools/validate-abi.sh
+++ b/devtools/validate-abi.sh
@@ -1,7 +1,8 @@
-#!/bin/sh
+#!/usr/bin/env bash
 #   BSD LICENSE
 #
 #   Copyright(c) 2015 Neil Horman. All rights reserved.
+#   Copyright(c) 2017 6WIND S.A.
 #   All rights reserved.
 #
 #   Redistribution and use in source and binary forms, with or without
@@ -27,236 +28,243 @@
 #   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 #   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-TAG1=$1
-TAG2=$2
-TARGET=$3
-ABI_DIR=`mktemp -d -p /tmp ABI.XXXXXX`
+set -e
 
-usage() {
-	echo "$0 <REV1> <REV2> <TARGET>"
-}
+abicheck=abi-compliance-checker
+abidump=abi-dumper
+default_dst=abi-check
+default_target=x86_64-native-linuxapp-gcc
 
-log() {
-	local level=$1
-	shift
-	echo "$*"
+# trap on error
+err_report() {
+    echo "$0: error at line $1"
 }
+trap 'err_report $LINENO' ERR
 
-validate_tags() {
+print_usage () {
+	cat <<- END_OF_HELP
+	$(basename $0) [options] <rev1> <rev2>
 
-	if [ -z "$HASH1" ]
-	then
-		echo "invalid revision: $TAG1"
-		return
-	fi
-	if [ -z "$HASH2" ]
-	then
-		echo "invalid revision: $TAG2"
-		return
-	fi
+	This script compares the ABI of 2 git revisions of the current
+	workspace. The output is a html report and a compilation log.
+
+	The objective is to make sure that applications built against
+	DSOs from the first revision can still run when executed using
+	the DSOs built from the second revision.
+
+	<rev1> and <rev2> are git commit id or tags.
+
+	Options:
+	  -h		show this help
+	  -j <num>	enable parallel compilation with <num> threads
+	  -v		show compilation logs on the console
+	  -d <dir>	change working directory (default is ${default_dst})
+	  -t <target>	the dpdk target to use (default is ${default_target})
+	  -f		overwrite existing files in destination directory
+
+	The script returns 0 on success, or the value of last failing
+	call of ${abicheck} (incompatible abi or the tool has run with errors).
+	The errors returned by ${abidump} are ignored.
+
+	END_OF_HELP
 }
 
-validate_args() {
-	if [ -z "$TAG1" ]
-	then
-		echo "Must Specify REV1"
-		return
-	fi
-	if [ -z "$TAG2" ]
-	then
-		echo "Must Specify REV2"
-		return
-	fi
-	if [ -z "$TARGET" ]
-	then
-		echo "Must Specify a build target"
+# log in the file, and on stdout if verbose
+# $1: level string
+# $2: string to be logged
+log() {
+	echo "$1: $2"
+	if [ "${verbose}" != "true" ]; then
+		echo "$1: $2" >&3
 	fi
 }
 
+# launch a command and log it, taking care of surrounding spaces with quotes
+cmd() {
+	local i s whitespace
+	s=""
+	whitespace="[[:space:]]"
+	for i in "$@"; do
+		if [[ $i =~ $whitespace ]]; then
+			i=\"$i\"
+		fi
+		if [ -z "$s" ]; then
+			s="$i"
+		else
+			s="$s $i"
+		fi
+	done
+
+	log "CMD" "$s"
+	"$@"
+}
 
-cleanup_and_exit() {
-	rm -rf $ABI_DIR
-	git checkout $CURRENT_BRANCH
-	exit $1
+# redirect or copy stderr/stdout to a file
+# the syntax is unfamiliar, but it makes the rest of the
+# code easier to read, avoiding the use of pipes
+set_log_file() {
+	# save original stdout and stderr in fd 3 and 4
+	exec 3>&1
+	exec 4>&2
+	# create a new fd 5 that send to a file
+	exec 5> >(cat > $1)
+	# send stdout and stderr to fd 5
+	if [ "${verbose}" = "true" ]; then
+		exec 1> >(tee /dev/fd/5 >&3)
+		exec 2> >(tee /dev/fd/5 >&4)
+	else
+		exec 1>&5
+		exec 2>&5
+	fi
 }
 
 # Make sure we configure SHARED libraries
 # Also turn off IGB and KNI as those require kernel headers to build
 fixup_config() {
-	sed -i -e"$ a\CONFIG_RTE_BUILD_SHARED_LIB=y" config/defconfig_$TARGET
-	sed -i -e"$ a\CONFIG_RTE_NEXT_ABI=n" config/defconfig_$TARGET
-	sed -i -e"$ a\CONFIG_RTE_EAL_IGB_UIO=n" config/defconfig_$TARGET
-	sed -i -e"$ a\CONFIG_RTE_LIBRTE_KNI=n" config/defconfig_$TARGET
-	sed -i -e"$ a\CONFIG_RTE_KNI_KMOD=n" config/defconfig_$TARGET
+	local conf=config/defconfig_$target
+	cmd sed -i -e"$ a\CONFIG_RTE_BUILD_SHARED_LIB=y" $conf
+	cmd sed -i -e"$ a\CONFIG_RTE_NEXT_ABI=n" $conf
+	cmd sed -i -e"$ a\CONFIG_RTE_EAL_IGB_UIO=n" $conf
+	cmd sed -i -e"$ a\CONFIG_RTE_LIBRTE_KNI=n" $conf
+	cmd sed -i -e"$ a\CONFIG_RTE_KNI_KMOD=n" $conf
 }
 
-###########################################
-#START
-############################################
+# build dpdk for the given tag and dump abi
+# $1: hash of the revision
+gen_abi() {
+	local i oldpwd
+
+	oldpwd=${PWD}
+	cmd git clone $(dirname $0)/.. ${dst}/${1}
+	cmd cd ${dst}/${1}
+
+	log "INFO" "Checking out version ${1} of the dpdk"
+	# Move to the old version of the tree
+	cmd git checkout ${1}
+
+	fixup_config
+
+	# Now configure the build
+	log "INFO" "Configuring DPDK ${1}"
+	cmd make config T=$target O=$target > ${dst}/log 2>&1
+
+	# Checking abi compliance relies on using the dwarf information in
+	# the shared objects. Build with -g to include them.
+	log "INFO" "Building DPDK ${1}. This might take a moment"
+	cmd make -j$parallel O=$target V=1 EXTRA_CFLAGS="-g -Og -Wno-error" \
+	    EXTRA_LDFLAGS="-g" || log "INFO" "The build failed"
+
+	# Move to the lib directory
+	cmd cd ${PWD}/$target/lib
+	log "INFO" "Collecting ABI information for ${1}"
+	for i in *.so; do
+		[ -e "$i" ] || break
+		cmd $abidump ${i} -o $dst/${1}/${i}.dump -lver ${1} || true
+		# hack to ignore empty SymbolsInfo section (no public ABI)
+		if grep -q "'SymbolInfo' => {}," $dst/${1}/${i}.dump \
+				2> /dev/null; then
+			log "INFO" "${i} has no public ABI, remove dump file"
+			cmd rm -f $dst/${1}/${i}.dump
+		fi
+	done
+	cmd cd ${oldpwd}
+}
 
-#trap on ctrl-c to clean up
-trap cleanup_and_exit SIGINT
+verbose=false
+parallel=1
+dst=${default_dst}
+target=${default_target}
+force=0
+while getopts j:vd:t:fh ARG ; do
+	case $ARG in
+		j ) parallel=$OPTARG ;;
+		v ) verbose=true ;;
+		d ) dst=$OPTARG ;;
+		t ) target=$OPTARG ;;
+		f ) force=1 ;;
+		h ) print_usage ; exit 0 ;;
+		? ) print_usage ; exit 1 ;;
+	esac
+done
+shift $(($OPTIND - 1))
 
-if [ -z "$DPDK_MAKE_JOBS" ]
-then
-	# This counts the number of cpus on the system
-	if [ -e /usr/bin/lscpu ]
-	then
-		DPDK_MAKE_JOBS=`lscpu -p=cpu | grep -v "#" | wc -l`
-	else
-		DPDK_MAKE_JOBS=1
-	fi
+if [ $# != 2 ]; then
+	print_usage
+	exit 1
 fi
 
-#Save the current branch
-CURRENT_BRANCH=`git branch | grep \* | cut -d' ' -f2`
+tag1=$1
+tag2=$2
 
-if [ -z "$CURRENT_BRANCH" ]
-then
-	CURRENT_BRANCH=`git log --pretty=format:%H HEAD~1..HEAD`
-fi
+# convert path to absolute
+case "${dst}" in
+	/*) ;;
+	*) dst=${PWD}/${dst} ;;
+esac
 
-if [ -n "$VERBOSE" ]
-then
-	export VERBOSE=/dev/stdout
-else
-	export VERBOSE=/dev/null
+if [ -e "${dst}" -a "$force" = 0 ]; then
+	echo "The ${dst} directory is not empty. Remove it, use another"
+	echo "one (-d <dir>), or force overriding (-f)"
+	exit 1
 fi
 
-# Validate that we have all the arguments we need
-res=$(validate_args)
-if [ -n "$res" ]
-then
-	echo $res
-	usage
-	cleanup_and_exit 1
-fi
+rm -rf ${dst}
+mkdir -p ${dst}
+set_log_file ${dst}/abi-check.log
+log "INFO" "Logs available in ${dst}/abi-check.log"
 
-HASH1=$(git show -s --format=%H "$TAG1" -- 2> /dev/null | tail -1)
-HASH2=$(git show -s --format=%H "$TAG2" -- 2> /dev/null | tail -1)
+command -v ${abicheck} || log "INFO" "Can't find ${abicheck} utility"
+command -v ${abidump} || log "INFO" "Can't find ${abidump} utility"
 
-# Make sure our tags exist
-res=$(validate_tags)
-if [ -n "$res" ]
-then
-	echo $res
-	cleanup_and_exit 1
-fi
+hash1=$(git show -s --format=%h "$tag1" -- 2> /dev/null | tail -1)
+hash2=$(git show -s --format=%h "$tag2" -- 2> /dev/null | tail -1)
 
 # Make hashes available in output for non-local reference
-TAG1="$TAG1 ($HASH1)"
-TAG2="$TAG2 ($HASH2)"
-
-ABICHECK=`which abi-compliance-checker 2>/dev/null`
-if [ $? -ne 0 ]
-then
-	log "INFO" "Can't find abi-compliance-checker utility"
-	cleanup_and_exit 1
-fi
-
-ABIDUMP=`which abi-dumper 2>/dev/null`
-if [ $? -ne 0 ]
-then
-	log "INFO" "Can't find abi-dumper utility"
-	cleanup_and_exit 1
-fi
+tag1="$tag1 ($hash1)"
+tag2="$tag2 ($hash2)"
 
-log "INFO" "We're going to check and make sure that applications built"
-log "INFO" "against DPDK DSOs from version $TAG1 will still run when executed"
-log "INFO" "against DPDK DSOs built from version $TAG2."
-log "INFO" ""
-
-# Check to make sure we have a clean tree
-git status | grep -q clean
-if [ $? -ne 0 ]
-then
-	log "WARN" "Working directory not clean, aborting"
-	cleanup_and_exit 1
+if [ "$hash1" = "$hash2" ]; then
+	log "ERROR" "$tag1 and $tag2 are the same revisions"
+	exit 1
 fi
 
-# Move to the root of the git tree
-cd $(dirname $0)/..
+cmd mkdir -p ${dst}
 
-log "INFO" "Checking out version $TAG1 of the dpdk"
-# Move to the old version of the tree
-git checkout $HASH1
+# dump abi for each revision
+gen_abi ${hash1}
+gen_abi ${hash2}
 
-fixup_config
+# compare the abi dumps
+ret=0
+list=""
+for i in ${dst}/${hash2}/*.dump; do
+	name=`basename $i`
+	libname=${name%.dump}
 
-# Checking abi compliance relies on using the dwarf information in
-# The shared objects.  Thats only included in the DSO's if we build
-# with -g
-export EXTRA_CFLAGS="$EXTRA_CFLAGS -g -O0"
-export EXTRA_LDFLAGS="$EXTRA_LDFLAGS -g"
-
-# Now configure the build
-log "INFO" "Configuring DPDK $TAG1"
-make config T=$TARGET O=$TARGET > $VERBOSE 2>&1
-
-log "INFO" "Building DPDK $TAG1. This might take a moment"
-make -j$DPDK_MAKE_JOBS O=$TARGET > $VERBOSE 2>&1
-
-if [ $? -ne 0 ]
-then
-	log "INFO" "THE BUILD FAILED.  ABORTING"
-	cleanup_and_exit 1
-fi
+	if [ ! -f $dst/${hash1}/$name ]; then
+		log "INFO" "$NAME does not exist in $tag1. skipping..."
+		continue
+	fi
 
-# Move to the lib directory
-cd $TARGET/lib
-log "INFO" "COLLECTING ABI INFORMATION FOR $TAG1"
-for i in `ls *.so`
-do
-	$ABIDUMP $i -o $ABI_DIR/$i-ABI-0.dump -lver $HASH1
+	local_ret=0
+	cmd $abicheck -l $libname \
+	    -old $dst/${hash1}/$name -new $dst/${hash2}/$name || local_ret=$?
+	if [ $local_ret != 0 ]; then
+		log "NOTICE" "$abicheck returned $local_ret"
+		ret=$local_ret
+		list="$list $libname"
+	fi
 done
-cd ../..
-
-# Now clean the tree, checkout the second tag, and rebuild
-git clean -f -d
-git reset --hard
-# Move to the new version of the tree
-log "INFO" "Checking out version $TAG2 of the dpdk"
-git checkout $HASH2
-
-fixup_config
-
-# Now configure the build
-log "INFO" "Configuring DPDK $TAG2"
-make config T=$TARGET O=$TARGET > $VERBOSE 2>&1
-
-log "INFO" "Building DPDK $TAG2. This might take a moment"
-make -j$DPDK_MAKE_JOBS O=$TARGET > $VERBOSE 2>&1
 
-if [ $? -ne 0 ]
-then
-	log "INFO" "THE BUILD FAILED.  ABORTING"
-	cleanup_and_exit 1
+if [ $ret != 0 ]; then
+	log "NOTICE" "At least one call to $abicheck returned an error."
+	log "NOTICE" "ABI may be incompatible, please check logs for details."
+	log "NOTICE" "Incompatible list: $list"
+else
+	log "NOTICE" "No error detected, ABI is compatible."
 fi
 
-cd $TARGET/lib
-log "INFO" "COLLECTING ABI INFORMATION FOR $TAG2"
-for i in `ls *.so`
-do
-	$ABIDUMP $i -o $ABI_DIR/$i-ABI-1.dump -lver $HASH2
-done
-cd ../..
-
-# Start comparison of ABI dumps
-for i in `ls $ABI_DIR/*-1.dump`
-do
-	NEWNAME=`basename $i`
-	OLDNAME=`basename $i | sed -e"s/1.dump/0.dump/"`
-	LIBNAME=`basename $i | sed -e"s/-ABI-1.dump//"`
-
-	if [ ! -f $ABI_DIR/$OLDNAME ]
-	then
-		log "INFO" "$OLDNAME DOES NOT EXIST IN $TAG1. SKIPPING..."
-	fi
-
-	#compare the abi dumps
-	$ABICHECK -l $LIBNAME -old $ABI_DIR/$OLDNAME -new $ABI_DIR/$NEWNAME
-done
+log "INFO" "Logs are in ${dst}/abi-check.log"
+log "INFO" "HTML reports are in ${dst}/${hash2}/compat_reports directory"
 
-git reset --hard
-log "INFO" "ABI CHECK COMPLETE.  REPORTS ARE IN compat_report directory"
-cleanup_and_exit 0
+exit $ret
-- 
2.11.0

Re: [dpdk-dev] [PATCH v3] devtools: rework abi checker script

[Neil Horman]

On Mon, Sep 11, 2017 at 10:46:35AM +0200, Olivier Matz wrote:
> The initial version of the script had some limitations:
> - cannot work on a non-clean workspace
> - environment variables are not documented
> - no compilation log in case of failure
> - return success even it abi is incompatible
> 
> This patch addresses these issues and rework the code.
> 
> Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
> ---
> 
> v2->v3:
> - fix when not launched from dpdk root dir
> - use "-Og -Wno-error" instead of "-O0"
> - fix typo in commit log
> 
> v1->v2:
> - use /usr/bin/env to find bash (which is required)
> - fix displayed path to html reports
> - reword help for -f option
> 
>  devtools/validate-abi.sh | 392 ++++++++++++++++++++++++-----------------------
>  1 file changed, 200 insertions(+), 192 deletions(-)
> 

This is alot closer, I think theres just a little wierdness left.  When running
this checker script, the end of the log shows this:

CMD: abi-compliance-checker -l librte_vhost.so -old /home/nhorman/git/dpdk/devtools/abi-check/222555480/librte_vhost.so.dump -new /home/nhorman/git/dpdk/devtools/abi-check/02657b4ad/librte_vhost.so.dump
NOTICE: At least one call to abi-compliance-checker returned an error.
NOTICE: ABI may be incompatible, please check logs for details.
NOTICE: Incompatible list:  librte_cryptodev.so librte_eal.so librte_efd.so librte_ethdev.so librte_eventdev.so librte_hash.so librte_pdump.so librte_pmd_crypto_scheduler.so librte_pmd_ring.so librte_ring.so

Which I think is something of a false positive.  The line:
NOTICE: At least one call to abi-compliance-checker returned an error.

I think is emitted simply because abi-compilance-checker returns non-zero and
reports that error if it finds any incompatibilities.  I'm not sure we want to
flag that as an error per se.  It gives the impression something has gone wrong,
rather than correctly identifying that there are incompatibilities.

Though on the other hand, maybe we do want to set that red flag so people look
at what the incompatibilities are.  As I say it out loud, perhaps that
preferable.

Thoughts
Neil

Re: [dpdk-dev] [PATCH v3] devtools: rework abi checker script

[Olivier MATZ]

Hi Neil,

On Wed, Sep 13, 2017 at 11:00:13AM -0400, Neil Horman wrote:
> On Mon, Sep 11, 2017 at 10:46:35AM +0200, Olivier Matz wrote:
> > The initial version of the script had some limitations:
> > - cannot work on a non-clean workspace
> > - environment variables are not documented
> > - no compilation log in case of failure
> > - return success even it abi is incompatible
> > 
> > This patch addresses these issues and rework the code.
> > 
> > Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
> > ---
> > 
> > v2->v3:
> > - fix when not launched from dpdk root dir
> > - use "-Og -Wno-error" instead of "-O0"
> > - fix typo in commit log
> > 
> > v1->v2:
> > - use /usr/bin/env to find bash (which is required)
> > - fix displayed path to html reports
> > - reword help for -f option
> > 
> >  devtools/validate-abi.sh | 392 ++++++++++++++++++++++++-----------------------
> >  1 file changed, 200 insertions(+), 192 deletions(-)
> > 
> 
> This is alot closer, I think theres just a little wierdness left.  When running
> this checker script, the end of the log shows this:
> 
> CMD: abi-compliance-checker -l librte_vhost.so -old /home/nhorman/git/dpdk/devtools/abi-check/222555480/librte_vhost.so.dump -new /home/nhorman/git/dpdk/devtools/abi-check/02657b4ad/librte_vhost.so.dump
> NOTICE: At least one call to abi-compliance-checker returned an error.
> NOTICE: ABI may be incompatible, please check logs for details.
> NOTICE: Incompatible list:  librte_cryptodev.so librte_eal.so librte_efd.so librte_ethdev.so librte_eventdev.so librte_hash.so librte_pdump.so librte_pmd_crypto_scheduler.so librte_pmd_ring.so librte_ring.so
> 
> Which I think is something of a false positive.  The line:
> NOTICE: At least one call to abi-compliance-checker returned an error.
>
> I think is emitted simply because abi-compilance-checker returns non-zero and
> reports that error if it finds any incompatibilities.  I'm not sure we want to
> flag that as an error per se.  It gives the impression something has gone wrong,
> rather than correctly identifying that there are incompatibilities.
> 
> Though on the other hand, maybe we do want to set that red flag so people look
> at what the incompatibilities are.  As I say it out loud, perhaps that
> preferable.

Yes, I can remove this line
"At least one call to abi-compliance-checker returned an error."
which does not give a lot of info anyway.

While reproducing the issue, I also realized that the report path
was not preoperly fixed. So I'm sending a v4 with these fixes.

Thanks,
Olivier

[dpdk-dev] [PATCH v4] devtools: rework abi checker script

[Olivier Matz]

The initial version of the script had some limitations:
- cannot work on a non-clean workspace
- environment variables are not documented
- no compilation log in case of failure
- return success even it abi is incompatible

This patch addresses these issues and rework the code.

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
---

v3->v4:
- clarify logs on incompatible abi
- log when an error returned an error
- [really] fix the report path
- log the output of make config in the proper file

v2->v3:
- fix when not launched from dpdk root dir
- use "-Og -Wno-error" instead of "-O0"
- fix typo in commit log

v1->v2:
- use /usr/bin/env to find bash (which is required)
- fix displayed path to html reports
- reword help for -f option


 devtools/validate-abi.sh | 397 ++++++++++++++++++++++++-----------------------
 1 file changed, 205 insertions(+), 192 deletions(-)

diff --git a/devtools/validate-abi.sh b/devtools/validate-abi.sh
index 0accc99b1..8caf43e83 100755
--- a/devtools/validate-abi.sh
+++ b/devtools/validate-abi.sh
@@ -1,7 +1,8 @@
-#!/bin/sh
+#!/usr/bin/env bash
 #   BSD LICENSE
 #
 #   Copyright(c) 2015 Neil Horman. All rights reserved.
+#   Copyright(c) 2017 6WIND S.A.
 #   All rights reserved.
 #
 #   Redistribution and use in source and binary forms, with or without
@@ -27,236 +28,248 @@
 #   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 #   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-TAG1=$1
-TAG2=$2
-TARGET=$3
-ABI_DIR=`mktemp -d -p /tmp ABI.XXXXXX`
+set -e
 
-usage() {
-	echo "$0 <REV1> <REV2> <TARGET>"
-}
+abicheck=abi-compliance-checker
+abidump=abi-dumper
+default_dst=abi-check
+default_target=x86_64-native-linuxapp-gcc
 
-log() {
-	local level=$1
-	shift
-	echo "$*"
+# trap on error
+err_report() {
+    echo "$0: error at line $1"
 }
+trap 'err_report $LINENO' ERR
 
-validate_tags() {
+print_usage () {
+	cat <<- END_OF_HELP
+	$(basename $0) [options] <rev1> <rev2>
 
-	if [ -z "$HASH1" ]
-	then
-		echo "invalid revision: $TAG1"
-		return
-	fi
-	if [ -z "$HASH2" ]
-	then
-		echo "invalid revision: $TAG2"
-		return
-	fi
+	This script compares the ABI of 2 git revisions of the current
+	workspace. The output is a html report and a compilation log.
+
+	The objective is to make sure that applications built against
+	DSOs from the first revision can still run when executed using
+	the DSOs built from the second revision.
+
+	<rev1> and <rev2> are git commit id or tags.
+
+	Options:
+	  -h		show this help
+	  -j <num>	enable parallel compilation with <num> threads
+	  -v		show compilation logs on the console
+	  -d <dir>	change working directory (default is ${default_dst})
+	  -t <target>	the dpdk target to use (default is ${default_target})
+	  -f		overwrite existing files in destination directory
+
+	The script returns 0 on success, or the value of last failing
+	call of ${abicheck} (incompatible abi or the tool has run with errors).
+	The errors returned by ${abidump} are ignored.
+
+	END_OF_HELP
 }
 
-validate_args() {
-	if [ -z "$TAG1" ]
-	then
-		echo "Must Specify REV1"
-		return
-	fi
-	if [ -z "$TAG2" ]
-	then
-		echo "Must Specify REV2"
-		return
-	fi
-	if [ -z "$TARGET" ]
-	then
-		echo "Must Specify a build target"
+# log in the file, and on stdout if verbose
+# $1: level string
+# $2: string to be logged
+log() {
+	echo "$1: $2"
+	if [ "${verbose}" != "true" ]; then
+		echo "$1: $2" >&3
 	fi
 }
 
+# launch a command and log it, taking care of surrounding spaces with quotes
+cmd() {
+	local i s whitespace ret
+	s=""
+	whitespace="[[:space:]]"
+	for i in "$@"; do
+		if [[ $i =~ $whitespace ]]; then
+			i=\"$i\"
+		fi
+		if [ -z "$s" ]; then
+			s="$i"
+		else
+			s="$s $i"
+		fi
+	done
+
+	ret=0
+	log "CMD" "$s"
+	"$@" || ret=$?
+	if [ "$ret" != "0" ]; then
+		log "CMD" "previous command returned $ret"
+	fi
+
+	return $ret
+}
 
-cleanup_and_exit() {
-	rm -rf $ABI_DIR
-	git checkout $CURRENT_BRANCH
-	exit $1
+# redirect or copy stderr/stdout to a file
+# the syntax is unfamiliar, but it makes the rest of the
+# code easier to read, avoiding the use of pipes
+set_log_file() {
+	# save original stdout and stderr in fd 3 and 4
+	exec 3>&1
+	exec 4>&2
+	# create a new fd 5 that send to a file
+	exec 5> >(cat > $1)
+	# send stdout and stderr to fd 5
+	if [ "${verbose}" = "true" ]; then
+		exec 1> >(tee /dev/fd/5 >&3)
+		exec 2> >(tee /dev/fd/5 >&4)
+	else
+		exec 1>&5
+		exec 2>&5
+	fi
 }
 
 # Make sure we configure SHARED libraries
 # Also turn off IGB and KNI as those require kernel headers to build
 fixup_config() {
-	sed -i -e"$ a\CONFIG_RTE_BUILD_SHARED_LIB=y" config/defconfig_$TARGET
-	sed -i -e"$ a\CONFIG_RTE_NEXT_ABI=n" config/defconfig_$TARGET
-	sed -i -e"$ a\CONFIG_RTE_EAL_IGB_UIO=n" config/defconfig_$TARGET
-	sed -i -e"$ a\CONFIG_RTE_LIBRTE_KNI=n" config/defconfig_$TARGET
-	sed -i -e"$ a\CONFIG_RTE_KNI_KMOD=n" config/defconfig_$TARGET
+	local conf=config/defconfig_$target
+	cmd sed -i -e"$ a\CONFIG_RTE_BUILD_SHARED_LIB=y" $conf
+	cmd sed -i -e"$ a\CONFIG_RTE_NEXT_ABI=n" $conf
+	cmd sed -i -e"$ a\CONFIG_RTE_EAL_IGB_UIO=n" $conf
+	cmd sed -i -e"$ a\CONFIG_RTE_LIBRTE_KNI=n" $conf
+	cmd sed -i -e"$ a\CONFIG_RTE_KNI_KMOD=n" $conf
 }
 
-###########################################
-#START
-############################################
+# build dpdk for the given tag and dump abi
+# $1: hash of the revision
+gen_abi() {
+	local i
+
+	cmd git clone ${dpdkroot} ${dst}/${1}
+	cmd cd ${dst}/${1}
+
+	log "INFO" "Checking out version ${1} of the dpdk"
+	# Move to the old version of the tree
+	cmd git checkout ${1}
+
+	fixup_config
+
+	# Now configure the build
+	log "INFO" "Configuring DPDK ${1}"
+	cmd make config T=$target O=$target
+
+	# Checking abi compliance relies on using the dwarf information in
+	# the shared objects. Build with -g to include them.
+	log "INFO" "Building DPDK ${1}. This might take a moment"
+	cmd make -j$parallel O=$target V=1 EXTRA_CFLAGS="-g -Og -Wno-error" \
+	    EXTRA_LDFLAGS="-g" || log "INFO" "The build failed"
+
+	# Move to the lib directory
+	cmd cd ${PWD}/$target/lib
+	log "INFO" "Collecting ABI information for ${1}"
+	for i in *.so; do
+		[ -e "$i" ] || break
+		cmd $abidump ${i} -o $dst/${1}/${i}.dump -lver ${1} || true
+		# hack to ignore empty SymbolsInfo section (no public ABI)
+		if grep -q "'SymbolInfo' => {}," $dst/${1}/${i}.dump \
+				2> /dev/null; then
+			log "INFO" "${i} has no public ABI, remove dump file"
+			cmd rm -f $dst/${1}/${i}.dump
+		fi
+	done
+}
 
-#trap on ctrl-c to clean up
-trap cleanup_and_exit SIGINT
+verbose=false
+parallel=1
+dst=${default_dst}
+target=${default_target}
+force=0
+while getopts j:vd:t:fh ARG ; do
+	case $ARG in
+		j ) parallel=$OPTARG ;;
+		v ) verbose=true ;;
+		d ) dst=$OPTARG ;;
+		t ) target=$OPTARG ;;
+		f ) force=1 ;;
+		h ) print_usage ; exit 0 ;;
+		? ) print_usage ; exit 1 ;;
+	esac
+done
+shift $(($OPTIND - 1))
 
-if [ -z "$DPDK_MAKE_JOBS" ]
-then
-	# This counts the number of cpus on the system
-	if [ -e /usr/bin/lscpu ]
-	then
-		DPDK_MAKE_JOBS=`lscpu -p=cpu | grep -v "#" | wc -l`
-	else
-		DPDK_MAKE_JOBS=1
-	fi
+if [ $# != 2 ]; then
+	print_usage
+	exit 1
 fi
 
-#Save the current branch
-CURRENT_BRANCH=`git branch | grep \* | cut -d' ' -f2`
+tag1=$1
+tag2=$2
 
-if [ -z "$CURRENT_BRANCH" ]
-then
-	CURRENT_BRANCH=`git log --pretty=format:%H HEAD~1..HEAD`
-fi
+# convert path to absolute
+case "${dst}" in
+	/*) ;;
+	*) dst=${PWD}/${dst} ;;
+esac
+dpdkroot=$(readlink -e $(dirname $0)/..)
 
-if [ -n "$VERBOSE" ]
-then
-	export VERBOSE=/dev/stdout
-else
-	export VERBOSE=/dev/null
+if [ -e "${dst}" -a "$force" = 0 ]; then
+	echo "The ${dst} directory is not empty. Remove it, use another"
+	echo "one (-d <dir>), or force overriding (-f)"
+	exit 1
 fi
 
-# Validate that we have all the arguments we need
-res=$(validate_args)
-if [ -n "$res" ]
-then
-	echo $res
-	usage
-	cleanup_and_exit 1
-fi
+rm -rf ${dst}
+mkdir -p ${dst}
+set_log_file ${dst}/abi-check.log
+log "INFO" "Logs available in ${dst}/abi-check.log"
 
-HASH1=$(git show -s --format=%H "$TAG1" -- 2> /dev/null | tail -1)
-HASH2=$(git show -s --format=%H "$TAG2" -- 2> /dev/null | tail -1)
+command -v ${abicheck} || log "INFO" "Can't find ${abicheck} utility"
+command -v ${abidump} || log "INFO" "Can't find ${abidump} utility"
 
-# Make sure our tags exist
-res=$(validate_tags)
-if [ -n "$res" ]
-then
-	echo $res
-	cleanup_and_exit 1
-fi
+hash1=$(git show -s --format=%h "$tag1" -- 2> /dev/null | tail -1)
+hash2=$(git show -s --format=%h "$tag2" -- 2> /dev/null | tail -1)
 
 # Make hashes available in output for non-local reference
-TAG1="$TAG1 ($HASH1)"
-TAG2="$TAG2 ($HASH2)"
-
-ABICHECK=`which abi-compliance-checker 2>/dev/null`
-if [ $? -ne 0 ]
-then
-	log "INFO" "Can't find abi-compliance-checker utility"
-	cleanup_and_exit 1
-fi
-
-ABIDUMP=`which abi-dumper 2>/dev/null`
-if [ $? -ne 0 ]
-then
-	log "INFO" "Can't find abi-dumper utility"
-	cleanup_and_exit 1
-fi
+tag1="$tag1 ($hash1)"
+tag2="$tag2 ($hash2)"
 
-log "INFO" "We're going to check and make sure that applications built"
-log "INFO" "against DPDK DSOs from version $TAG1 will still run when executed"
-log "INFO" "against DPDK DSOs built from version $TAG2."
-log "INFO" ""
-
-# Check to make sure we have a clean tree
-git status | grep -q clean
-if [ $? -ne 0 ]
-then
-	log "WARN" "Working directory not clean, aborting"
-	cleanup_and_exit 1
+if [ "$hash1" = "$hash2" ]; then
+	log "ERROR" "$tag1 and $tag2 are the same revisions"
+	exit 1
 fi
 
-# Move to the root of the git tree
-cd $(dirname $0)/..
+cmd mkdir -p ${dst}
 
-log "INFO" "Checking out version $TAG1 of the dpdk"
-# Move to the old version of the tree
-git checkout $HASH1
+# dump abi for each revision
+gen_abi ${hash1}
+gen_abi ${hash2}
 
-fixup_config
+# compare the abi dumps
+cmd cd ${dst}
+ret=0
+list=""
+for i in ${hash2}/*.dump; do
+	name=`basename $i`
+	libname=${name%.dump}
 
-# Checking abi compliance relies on using the dwarf information in
-# The shared objects.  Thats only included in the DSO's if we build
-# with -g
-export EXTRA_CFLAGS="$EXTRA_CFLAGS -g -O0"
-export EXTRA_LDFLAGS="$EXTRA_LDFLAGS -g"
-
-# Now configure the build
-log "INFO" "Configuring DPDK $TAG1"
-make config T=$TARGET O=$TARGET > $VERBOSE 2>&1
-
-log "INFO" "Building DPDK $TAG1. This might take a moment"
-make -j$DPDK_MAKE_JOBS O=$TARGET > $VERBOSE 2>&1
-
-if [ $? -ne 0 ]
-then
-	log "INFO" "THE BUILD FAILED.  ABORTING"
-	cleanup_and_exit 1
-fi
+	if [ ! -f ${hash1}/$name ]; then
+		log "INFO" "$NAME does not exist in $tag1. skipping..."
+		continue
+	fi
 
-# Move to the lib directory
-cd $TARGET/lib
-log "INFO" "COLLECTING ABI INFORMATION FOR $TAG1"
-for i in `ls *.so`
-do
-	$ABIDUMP $i -o $ABI_DIR/$i-ABI-0.dump -lver $HASH1
+	local_ret=0
+	cmd $abicheck -l $libname \
+	    -old ${hash1}/$name -new ${hash2}/$name || local_ret=$?
+	if [ $local_ret != 0 ]; then
+		log "NOTICE" "$abicheck returned $local_ret"
+		ret=$local_ret
+		list="$list $libname"
+	fi
 done
-cd ../..
-
-# Now clean the tree, checkout the second tag, and rebuild
-git clean -f -d
-git reset --hard
-# Move to the new version of the tree
-log "INFO" "Checking out version $TAG2 of the dpdk"
-git checkout $HASH2
-
-fixup_config
-
-# Now configure the build
-log "INFO" "Configuring DPDK $TAG2"
-make config T=$TARGET O=$TARGET > $VERBOSE 2>&1
-
-log "INFO" "Building DPDK $TAG2. This might take a moment"
-make -j$DPDK_MAKE_JOBS O=$TARGET > $VERBOSE 2>&1
 
-if [ $? -ne 0 ]
-then
-	log "INFO" "THE BUILD FAILED.  ABORTING"
-	cleanup_and_exit 1
+if [ $ret != 0 ]; then
+	log "NOTICE" "ABI may be incompatible, check reports/logs for details."
+	log "NOTICE" "Incompatible list: $list"
+else
+	log "NOTICE" "No error detected, ABI is compatible."
 fi
 
-cd $TARGET/lib
-log "INFO" "COLLECTING ABI INFORMATION FOR $TAG2"
-for i in `ls *.so`
-do
-	$ABIDUMP $i -o $ABI_DIR/$i-ABI-1.dump -lver $HASH2
-done
-cd ../..
-
-# Start comparison of ABI dumps
-for i in `ls $ABI_DIR/*-1.dump`
-do
-	NEWNAME=`basename $i`
-	OLDNAME=`basename $i | sed -e"s/1.dump/0.dump/"`
-	LIBNAME=`basename $i | sed -e"s/-ABI-1.dump//"`
-
-	if [ ! -f $ABI_DIR/$OLDNAME ]
-	then
-		log "INFO" "$OLDNAME DOES NOT EXIST IN $TAG1. SKIPPING..."
-	fi
-
-	#compare the abi dumps
-	$ABICHECK -l $LIBNAME -old $ABI_DIR/$OLDNAME -new $ABI_DIR/$NEWNAME
-done
+log "INFO" "Logs are in ${dst}/abi-check.log"
+log "INFO" "HTML reports are in ${dst}/compat_reports directory"
 
-git reset --hard
-log "INFO" "ABI CHECK COMPLETE.  REPORTS ARE IN compat_report directory"
-cleanup_and_exit 0
+exit $ret
-- 
2.11.0

Re: [dpdk-dev] [PATCH v4] devtools: rework abi checker script

[Neil Horman]

On Wed, Sep 20, 2017 at 11:12:53AM +0200, Olivier Matz wrote:
> The initial version of the script had some limitations:
> - cannot work on a non-clean workspace
> - environment variables are not documented
> - no compilation log in case of failure
> - return success even it abi is incompatible
> 
> This patch addresses these issues and rework the code.
> 
> Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
> ---
> 
> v3->v4:
> - clarify logs on incompatible abi
> - log when an error returned an error
> - [really] fix the report path
> - log the output of make config in the proper file
> 
> v2->v3:
> - fix when not launched from dpdk root dir
> - use "-Og -Wno-error" instead of "-O0"
> - fix typo in commit log
> 
> v1->v2:
> - use /usr/bin/env to find bash (which is required)
> - fix displayed path to html reports
> - reword help for -f option
> 
> 
>  devtools/validate-abi.sh | 397 ++++++++++++++++++++++++-----------------------
>  1 file changed, 205 insertions(+), 192 deletions(-)
> 
This looks better, thank you for the iterations.  One last note: The abi dumper
utility errors out with error code of 12 if a given object has no exported
symbols, and I see a few of those.  You may want to consider catching that
error, logging an appropriate message and skipping the error emit.  That can be
handled later though, as its a corner case.  I'd go with this patch, and then
do a incremental improvement later

Acked-by: Neil Horman <nhorman@tuxdriver.com>

> diff --git a/devtools/validate-abi.sh b/devtools/validate-abi.sh
> index 0accc99b1..8caf43e83 100755
> --- a/devtools/validate-abi.sh
> +++ b/devtools/validate-abi.sh
> @@ -1,7 +1,8 @@
> -#!/bin/sh
> +#!/usr/bin/env bash
>  #   BSD LICENSE
>  #
>  #   Copyright(c) 2015 Neil Horman. All rights reserved.
> +#   Copyright(c) 2017 6WIND S.A.
>  #   All rights reserved.
>  #
>  #   Redistribution and use in source and binary forms, with or without
> @@ -27,236 +28,248 @@
>  #   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
>  #   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
>  
> -TAG1=$1
> -TAG2=$2
> -TARGET=$3
> -ABI_DIR=`mktemp -d -p /tmp ABI.XXXXXX`
> +set -e
>  
> -usage() {
> -	echo "$0 <REV1> <REV2> <TARGET>"
> -}
> +abicheck=abi-compliance-checker
> +abidump=abi-dumper
> +default_dst=abi-check
> +default_target=x86_64-native-linuxapp-gcc
>  
> -log() {
> -	local level=$1
> -	shift
> -	echo "$*"
> +# trap on error
> +err_report() {
> +    echo "$0: error at line $1"
>  }
> +trap 'err_report $LINENO' ERR
>  
> -validate_tags() {
> +print_usage () {
> +	cat <<- END_OF_HELP
> +	$(basename $0) [options] <rev1> <rev2>
>  
> -	if [ -z "$HASH1" ]
> -	then
> -		echo "invalid revision: $TAG1"
> -		return
> -	fi
> -	if [ -z "$HASH2" ]
> -	then
> -		echo "invalid revision: $TAG2"
> -		return
> -	fi
> +	This script compares the ABI of 2 git revisions of the current
> +	workspace. The output is a html report and a compilation log.
> +
> +	The objective is to make sure that applications built against
> +	DSOs from the first revision can still run when executed using
> +	the DSOs built from the second revision.
> +
> +	<rev1> and <rev2> are git commit id or tags.
> +
> +	Options:
> +	  -h		show this help
> +	  -j <num>	enable parallel compilation with <num> threads
> +	  -v		show compilation logs on the console
> +	  -d <dir>	change working directory (default is ${default_dst})
> +	  -t <target>	the dpdk target to use (default is ${default_target})
> +	  -f		overwrite existing files in destination directory
> +
> +	The script returns 0 on success, or the value of last failing
> +	call of ${abicheck} (incompatible abi or the tool has run with errors).
> +	The errors returned by ${abidump} are ignored.
> +
> +	END_OF_HELP
>  }
>  
> -validate_args() {
> -	if [ -z "$TAG1" ]
> -	then
> -		echo "Must Specify REV1"
> -		return
> -	fi
> -	if [ -z "$TAG2" ]
> -	then
> -		echo "Must Specify REV2"
> -		return
> -	fi
> -	if [ -z "$TARGET" ]
> -	then
> -		echo "Must Specify a build target"
> +# log in the file, and on stdout if verbose
> +# $1: level string
> +# $2: string to be logged
> +log() {
> +	echo "$1: $2"
> +	if [ "${verbose}" != "true" ]; then
> +		echo "$1: $2" >&3
>  	fi
>  }
>  
> +# launch a command and log it, taking care of surrounding spaces with quotes
> +cmd() {
> +	local i s whitespace ret
> +	s=""
> +	whitespace="[[:space:]]"
> +	for i in "$@"; do
> +		if [[ $i =~ $whitespace ]]; then
> +			i=\"$i\"
> +		fi
> +		if [ -z "$s" ]; then
> +			s="$i"
> +		else
> +			s="$s $i"
> +		fi
> +	done
> +
> +	ret=0
> +	log "CMD" "$s"
> +	"$@" || ret=$?
> +	if [ "$ret" != "0" ]; then
> +		log "CMD" "previous command returned $ret"
> +	fi
> +
> +	return $ret
> +}
>  
> -cleanup_and_exit() {
> -	rm -rf $ABI_DIR
> -	git checkout $CURRENT_BRANCH
> -	exit $1
> +# redirect or copy stderr/stdout to a file
> +# the syntax is unfamiliar, but it makes the rest of the
> +# code easier to read, avoiding the use of pipes
> +set_log_file() {
> +	# save original stdout and stderr in fd 3 and 4
> +	exec 3>&1
> +	exec 4>&2
> +	# create a new fd 5 that send to a file
> +	exec 5> >(cat > $1)
> +	# send stdout and stderr to fd 5
> +	if [ "${verbose}" = "true" ]; then
> +		exec 1> >(tee /dev/fd/5 >&3)
> +		exec 2> >(tee /dev/fd/5 >&4)
> +	else
> +		exec 1>&5
> +		exec 2>&5
> +	fi
>  }
>  
>  # Make sure we configure SHARED libraries
>  # Also turn off IGB and KNI as those require kernel headers to build
>  fixup_config() {
> -	sed -i -e"$ a\CONFIG_RTE_BUILD_SHARED_LIB=y" config/defconfig_$TARGET
> -	sed -i -e"$ a\CONFIG_RTE_NEXT_ABI=n" config/defconfig_$TARGET
> -	sed -i -e"$ a\CONFIG_RTE_EAL_IGB_UIO=n" config/defconfig_$TARGET
> -	sed -i -e"$ a\CONFIG_RTE_LIBRTE_KNI=n" config/defconfig_$TARGET
> -	sed -i -e"$ a\CONFIG_RTE_KNI_KMOD=n" config/defconfig_$TARGET
> +	local conf=config/defconfig_$target
> +	cmd sed -i -e"$ a\CONFIG_RTE_BUILD_SHARED_LIB=y" $conf
> +	cmd sed -i -e"$ a\CONFIG_RTE_NEXT_ABI=n" $conf
> +	cmd sed -i -e"$ a\CONFIG_RTE_EAL_IGB_UIO=n" $conf
> +	cmd sed -i -e"$ a\CONFIG_RTE_LIBRTE_KNI=n" $conf
> +	cmd sed -i -e"$ a\CONFIG_RTE_KNI_KMOD=n" $conf
>  }
>  
> -###########################################
> -#START
> -############################################
> +# build dpdk for the given tag and dump abi
> +# $1: hash of the revision
> +gen_abi() {
> +	local i
> +
> +	cmd git clone ${dpdkroot} ${dst}/${1}
> +	cmd cd ${dst}/${1}
> +
> +	log "INFO" "Checking out version ${1} of the dpdk"
> +	# Move to the old version of the tree
> +	cmd git checkout ${1}
> +
> +	fixup_config
> +
> +	# Now configure the build
> +	log "INFO" "Configuring DPDK ${1}"
> +	cmd make config T=$target O=$target
> +
> +	# Checking abi compliance relies on using the dwarf information in
> +	# the shared objects. Build with -g to include them.
> +	log "INFO" "Building DPDK ${1}. This might take a moment"
> +	cmd make -j$parallel O=$target V=1 EXTRA_CFLAGS="-g -Og -Wno-error" \
> +	    EXTRA_LDFLAGS="-g" || log "INFO" "The build failed"
> +
> +	# Move to the lib directory
> +	cmd cd ${PWD}/$target/lib
> +	log "INFO" "Collecting ABI information for ${1}"
> +	for i in *.so; do
> +		[ -e "$i" ] || break
> +		cmd $abidump ${i} -o $dst/${1}/${i}.dump -lver ${1} || true
> +		# hack to ignore empty SymbolsInfo section (no public ABI)
> +		if grep -q "'SymbolInfo' => {}," $dst/${1}/${i}.dump \
> +				2> /dev/null; then
> +			log "INFO" "${i} has no public ABI, remove dump file"
> +			cmd rm -f $dst/${1}/${i}.dump
> +		fi
> +	done
> +}
>  
> -#trap on ctrl-c to clean up
> -trap cleanup_and_exit SIGINT
> +verbose=false
> +parallel=1
> +dst=${default_dst}
> +target=${default_target}
> +force=0
> +while getopts j:vd:t:fh ARG ; do
> +	case $ARG in
> +		j ) parallel=$OPTARG ;;
> +		v ) verbose=true ;;
> +		d ) dst=$OPTARG ;;
> +		t ) target=$OPTARG ;;
> +		f ) force=1 ;;
> +		h ) print_usage ; exit 0 ;;
> +		? ) print_usage ; exit 1 ;;
> +	esac
> +done
> +shift $(($OPTIND - 1))
>  
> -if [ -z "$DPDK_MAKE_JOBS" ]
> -then
> -	# This counts the number of cpus on the system
> -	if [ -e /usr/bin/lscpu ]
> -	then
> -		DPDK_MAKE_JOBS=`lscpu -p=cpu | grep -v "#" | wc -l`
> -	else
> -		DPDK_MAKE_JOBS=1
> -	fi
> +if [ $# != 2 ]; then
> +	print_usage
> +	exit 1
>  fi
>  
> -#Save the current branch
> -CURRENT_BRANCH=`git branch | grep \* | cut -d' ' -f2`
> +tag1=$1
> +tag2=$2
>  
> -if [ -z "$CURRENT_BRANCH" ]
> -then
> -	CURRENT_BRANCH=`git log --pretty=format:%H HEAD~1..HEAD`
> -fi
> +# convert path to absolute
> +case "${dst}" in
> +	/*) ;;
> +	*) dst=${PWD}/${dst} ;;
> +esac
> +dpdkroot=$(readlink -e $(dirname $0)/..)
>  
> -if [ -n "$VERBOSE" ]
> -then
> -	export VERBOSE=/dev/stdout
> -else
> -	export VERBOSE=/dev/null
> +if [ -e "${dst}" -a "$force" = 0 ]; then
> +	echo "The ${dst} directory is not empty. Remove it, use another"
> +	echo "one (-d <dir>), or force overriding (-f)"
> +	exit 1
>  fi
>  
> -# Validate that we have all the arguments we need
> -res=$(validate_args)
> -if [ -n "$res" ]
> -then
> -	echo $res
> -	usage
> -	cleanup_and_exit 1
> -fi
> +rm -rf ${dst}
> +mkdir -p ${dst}
> +set_log_file ${dst}/abi-check.log
> +log "INFO" "Logs available in ${dst}/abi-check.log"
>  
> -HASH1=$(git show -s --format=%H "$TAG1" -- 2> /dev/null | tail -1)
> -HASH2=$(git show -s --format=%H "$TAG2" -- 2> /dev/null | tail -1)
> +command -v ${abicheck} || log "INFO" "Can't find ${abicheck} utility"
> +command -v ${abidump} || log "INFO" "Can't find ${abidump} utility"
>  
> -# Make sure our tags exist
> -res=$(validate_tags)
> -if [ -n "$res" ]
> -then
> -	echo $res
> -	cleanup_and_exit 1
> -fi
> +hash1=$(git show -s --format=%h "$tag1" -- 2> /dev/null | tail -1)
> +hash2=$(git show -s --format=%h "$tag2" -- 2> /dev/null | tail -1)
>  
>  # Make hashes available in output for non-local reference
> -TAG1="$TAG1 ($HASH1)"
> -TAG2="$TAG2 ($HASH2)"
> -
> -ABICHECK=`which abi-compliance-checker 2>/dev/null`
> -if [ $? -ne 0 ]
> -then
> -	log "INFO" "Can't find abi-compliance-checker utility"
> -	cleanup_and_exit 1
> -fi
> -
> -ABIDUMP=`which abi-dumper 2>/dev/null`
> -if [ $? -ne 0 ]
> -then
> -	log "INFO" "Can't find abi-dumper utility"
> -	cleanup_and_exit 1
> -fi
> +tag1="$tag1 ($hash1)"
> +tag2="$tag2 ($hash2)"
>  
> -log "INFO" "We're going to check and make sure that applications built"
> -log "INFO" "against DPDK DSOs from version $TAG1 will still run when executed"
> -log "INFO" "against DPDK DSOs built from version $TAG2."
> -log "INFO" ""
> -
> -# Check to make sure we have a clean tree
> -git status | grep -q clean
> -if [ $? -ne 0 ]
> -then
> -	log "WARN" "Working directory not clean, aborting"
> -	cleanup_and_exit 1
> +if [ "$hash1" = "$hash2" ]; then
> +	log "ERROR" "$tag1 and $tag2 are the same revisions"
> +	exit 1
>  fi
>  
> -# Move to the root of the git tree
> -cd $(dirname $0)/..
> +cmd mkdir -p ${dst}
>  
> -log "INFO" "Checking out version $TAG1 of the dpdk"
> -# Move to the old version of the tree
> -git checkout $HASH1
> +# dump abi for each revision
> +gen_abi ${hash1}
> +gen_abi ${hash2}
>  
> -fixup_config
> +# compare the abi dumps
> +cmd cd ${dst}
> +ret=0
> +list=""
> +for i in ${hash2}/*.dump; do
> +	name=`basename $i`
> +	libname=${name%.dump}
>  
> -# Checking abi compliance relies on using the dwarf information in
> -# The shared objects.  Thats only included in the DSO's if we build
> -# with -g
> -export EXTRA_CFLAGS="$EXTRA_CFLAGS -g -O0"
> -export EXTRA_LDFLAGS="$EXTRA_LDFLAGS -g"
> -
> -# Now configure the build
> -log "INFO" "Configuring DPDK $TAG1"
> -make config T=$TARGET O=$TARGET > $VERBOSE 2>&1
> -
> -log "INFO" "Building DPDK $TAG1. This might take a moment"
> -make -j$DPDK_MAKE_JOBS O=$TARGET > $VERBOSE 2>&1
> -
> -if [ $? -ne 0 ]
> -then
> -	log "INFO" "THE BUILD FAILED.  ABORTING"
> -	cleanup_and_exit 1
> -fi
> +	if [ ! -f ${hash1}/$name ]; then
> +		log "INFO" "$NAME does not exist in $tag1. skipping..."
> +		continue
> +	fi
>  
> -# Move to the lib directory
> -cd $TARGET/lib
> -log "INFO" "COLLECTING ABI INFORMATION FOR $TAG1"
> -for i in `ls *.so`
> -do
> -	$ABIDUMP $i -o $ABI_DIR/$i-ABI-0.dump -lver $HASH1
> +	local_ret=0
> +	cmd $abicheck -l $libname \
> +	    -old ${hash1}/$name -new ${hash2}/$name || local_ret=$?
> +	if [ $local_ret != 0 ]; then
> +		log "NOTICE" "$abicheck returned $local_ret"
> +		ret=$local_ret
> +		list="$list $libname"
> +	fi
>  done
> -cd ../..
> -
> -# Now clean the tree, checkout the second tag, and rebuild
> -git clean -f -d
> -git reset --hard
> -# Move to the new version of the tree
> -log "INFO" "Checking out version $TAG2 of the dpdk"
> -git checkout $HASH2
> -
> -fixup_config
> -
> -# Now configure the build
> -log "INFO" "Configuring DPDK $TAG2"
> -make config T=$TARGET O=$TARGET > $VERBOSE 2>&1
> -
> -log "INFO" "Building DPDK $TAG2. This might take a moment"
> -make -j$DPDK_MAKE_JOBS O=$TARGET > $VERBOSE 2>&1
>  
> -if [ $? -ne 0 ]
> -then
> -	log "INFO" "THE BUILD FAILED.  ABORTING"
> -	cleanup_and_exit 1
> +if [ $ret != 0 ]; then
> +	log "NOTICE" "ABI may be incompatible, check reports/logs for details."
> +	log "NOTICE" "Incompatible list: $list"
> +else
> +	log "NOTICE" "No error detected, ABI is compatible."
>  fi
>  
> -cd $TARGET/lib
> -log "INFO" "COLLECTING ABI INFORMATION FOR $TAG2"
> -for i in `ls *.so`
> -do
> -	$ABIDUMP $i -o $ABI_DIR/$i-ABI-1.dump -lver $HASH2
> -done
> -cd ../..
> -
> -# Start comparison of ABI dumps
> -for i in `ls $ABI_DIR/*-1.dump`
> -do
> -	NEWNAME=`basename $i`
> -	OLDNAME=`basename $i | sed -e"s/1.dump/0.dump/"`
> -	LIBNAME=`basename $i | sed -e"s/-ABI-1.dump//"`
> -
> -	if [ ! -f $ABI_DIR/$OLDNAME ]
> -	then
> -		log "INFO" "$OLDNAME DOES NOT EXIST IN $TAG1. SKIPPING..."
> -	fi
> -
> -	#compare the abi dumps
> -	$ABICHECK -l $LIBNAME -old $ABI_DIR/$OLDNAME -new $ABI_DIR/$NEWNAME
> -done
> +log "INFO" "Logs are in ${dst}/abi-check.log"
> +log "INFO" "HTML reports are in ${dst}/compat_reports directory"
>  
> -git reset --hard
> -log "INFO" "ABI CHECK COMPLETE.  REPORTS ARE IN compat_report directory"
> -cleanup_and_exit 0
> +exit $ret
> -- 
> 2.11.0
> 
> 

Re: [dpdk-dev] [PATCH v4] devtools: rework abi checker script

[Olivier MATZ]

On Thu, Sep 21, 2017 at 11:40:35AM -0400, Neil Horman wrote:
> On Wed, Sep 20, 2017 at 11:12:53AM +0200, Olivier Matz wrote:
> > The initial version of the script had some limitations:
> > - cannot work on a non-clean workspace
> > - environment variables are not documented
> > - no compilation log in case of failure
> > - return success even it abi is incompatible
> >
> > This patch addresses these issues and rework the code.
> >
> > Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
> > ---
> >
> > v3->v4:
> > - clarify logs on incompatible abi
> > - log when an error returned an error
> > - [really] fix the report path
> > - log the output of make config in the proper file
> >
> > v2->v3:
> > - fix when not launched from dpdk root dir
> > - use "-Og -Wno-error" instead of "-O0"
> > - fix typo in commit log
> >
> > v1->v2:
> > - use /usr/bin/env to find bash (which is required)
> > - fix displayed path to html reports
> > - reword help for -f option
> >
> >
> >  devtools/validate-abi.sh | 397 ++++++++++++++++++++++++-----------------------
> >  1 file changed, 205 insertions(+), 192 deletions(-)
> >
> This looks better, thank you for the iterations.  One last note: The abi dumper
> utility errors out with error code of 12 if a given object has no exported
> symbols, and I see a few of those.  You may want to consider catching that
> error, logging an appropriate message and skipping the error emit.  That can be
> handled later though, as its a corner case.  I'd go with this patch, and then
> do a incremental improvement later

Unfortunately the error code 12 does not exist on my version of abi-dumper
(debian stable, v0.99.16). I'm currently doing this as a workaround:

    cmd $abidump ${i} -o $dst/${1}/${i}.dump -lver ${1} || true
    # hack to ignore empty SymbolsInfo section (no public ABI)
    if grep -q "'SymbolInfo' => {}," $dst/${1}/${i}.dump 2> /dev/null; then
        log "INFO" "${i} has no public ABI, remove dump file"
        cmd rm -f $dst/${1}/${i}.dump
    fi

I tested with the latest abi-dumper version, and I indeed see
these errors in the logs. It seems we don't go inside the 'if'
above with a recent abi-dumper, and the .dump file is not generated.

I can add a check to display the same additional log
"INFO" "${i} has no public ABI, remove dump file" if abi-dumper
returns 12. Something like this:

    ret=0
    cmd $abidump ${i} -o $dst/${1}/${i}.dump -lver ${1} || ret=$?
    # hack to ignore empty SymbolsInfo section (no public ABI)
    if [ ${ret} = 12 ]; then
            log "INFO" "${i} has no public ABI"
    fi
    if grep -q "'SymbolInfo' => {}," $dst/${1}/${i}.dump 2> /dev/null; then
        log "INFO" "${i} has no public ABI, remove dump file"
        cmd rm -f $dst/${1}/${i}.dump
    fi


Olivier

Re: [dpdk-dev] [PATCH v4] devtools: rework abi checker script

[Neil Horman]

On Mon, Sep 25, 2017 at 11:11:20AM +0200, Olivier MATZ wrote:
> On Thu, Sep 21, 2017 at 11:40:35AM -0400, Neil Horman wrote:
> > On Wed, Sep 20, 2017 at 11:12:53AM +0200, Olivier Matz wrote:
> > > The initial version of the script had some limitations:
> > > - cannot work on a non-clean workspace
> > > - environment variables are not documented
> > > - no compilation log in case of failure
> > > - return success even it abi is incompatible
> > >
> > > This patch addresses these issues and rework the code.
> > >
> > > Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
> > > ---
> > >
> > > v3->v4:
> > > - clarify logs on incompatible abi
> > > - log when an error returned an error
> > > - [really] fix the report path
> > > - log the output of make config in the proper file
> > >
> > > v2->v3:
> > > - fix when not launched from dpdk root dir
> > > - use "-Og -Wno-error" instead of "-O0"
> > > - fix typo in commit log
> > >
> > > v1->v2:
> > > - use /usr/bin/env to find bash (which is required)
> > > - fix displayed path to html reports
> > > - reword help for -f option
> > >
> > >
> > >  devtools/validate-abi.sh | 397 ++++++++++++++++++++++++-----------------------
> > >  1 file changed, 205 insertions(+), 192 deletions(-)
> > >
> > This looks better, thank you for the iterations.  One last note: The abi dumper
> > utility errors out with error code of 12 if a given object has no exported
> > symbols, and I see a few of those.  You may want to consider catching that
> > error, logging an appropriate message and skipping the error emit.  That can be
> > handled later though, as its a corner case.  I'd go with this patch, and then
> > do a incremental improvement later
> 
> Unfortunately the error code 12 does not exist on my version of abi-dumper
> (debian stable, v0.99.16). I'm currently doing this as a workaround:
> 
>     cmd $abidump ${i} -o $dst/${1}/${i}.dump -lver ${1} || true
>     # hack to ignore empty SymbolsInfo section (no public ABI)
>     if grep -q "'SymbolInfo' => {}," $dst/${1}/${i}.dump 2> /dev/null; then
>         log "INFO" "${i} has no public ABI, remove dump file"
>         cmd rm -f $dst/${1}/${i}.dump
>     fi
> 
> I tested with the latest abi-dumper version, and I indeed see
> these errors in the logs. It seems we don't go inside the 'if'
> above with a recent abi-dumper, and the .dump file is not generated.
> 
> I can add a check to display the same additional log
> "INFO" "${i} has no public ABI, remove dump file" if abi-dumper
> returns 12. Something like this:
> 
>     ret=0
>     cmd $abidump ${i} -o $dst/${1}/${i}.dump -lver ${1} || ret=$?
>     # hack to ignore empty SymbolsInfo section (no public ABI)
>     if [ ${ret} = 12 ]; then
>             log "INFO" "${i} has no public ABI"
>     fi
>     if grep -q "'SymbolInfo' => {}," $dst/${1}/${i}.dump 2> /dev/null; then
>         log "INFO" "${i} has no public ABI, remove dump file"
>         cmd rm -f $dst/${1}/${i}.dump
>     fi
> 
Agreed, that makes sense.
Thanks.
Neil

> 
> Olivier
> 

[dpdk-dev] [PATCH v5] devtools: rework abi checker script

[Olivier Matz]

The initial version of the script had some limitations:
- cannot work on a non-clean workspace
- environment variables are not documented
- no compilation log in case of failure
- return success even it abi is incompatible

This patch addresses these issues and rework the code.

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
---

v4->v5:
- Add a log when shared lib has no public ABI

v3->v4:
- clarify logs on incompatible abi
- log when an error returned an error
- [really] fix the report path
- log the output of make config in the proper file

v2->v3:
- fix when not launched from dpdk root dir
- use "-Og -Wno-error" instead of "-O0"
- fix typo in commit log

v1->v2:
- use /usr/bin/env to find bash (which is required)
- fix displayed path to html reports
- reword help for -f option

 devtools/validate-abi.sh | 397 ++++++++++++++++++++++++-----------------------
 1 file changed, 205 insertions(+), 192 deletions(-)

diff --git a/devtools/validate-abi.sh b/devtools/validate-abi.sh
index 0accc99b1..8caf43e83 100755
--- a/devtools/validate-abi.sh
+++ b/devtools/validate-abi.sh
@@ -1,7 +1,8 @@
-#!/bin/sh
+#!/usr/bin/env bash
 #   BSD LICENSE
 #
 #   Copyright(c) 2015 Neil Horman. All rights reserved.
+#   Copyright(c) 2017 6WIND S.A.
 #   All rights reserved.
 #
 #   Redistribution and use in source and binary forms, with or without
@@ -27,236 +28,248 @@
 #   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 #   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-TAG1=$1
-TAG2=$2
-TARGET=$3
-ABI_DIR=`mktemp -d -p /tmp ABI.XXXXXX`
+set -e
 
-usage() {
-	echo "$0 <REV1> <REV2> <TARGET>"
-}
+abicheck=abi-compliance-checker
+abidump=abi-dumper
+default_dst=abi-check
+default_target=x86_64-native-linuxapp-gcc
 
-log() {
-	local level=$1
-	shift
-	echo "$*"
+# trap on error
+err_report() {
+    echo "$0: error at line $1"
 }
+trap 'err_report $LINENO' ERR
 
-validate_tags() {
+print_usage () {
+	cat <<- END_OF_HELP
+	$(basename $0) [options] <rev1> <rev2>
 
-	if [ -z "$HASH1" ]
-	then
-		echo "invalid revision: $TAG1"
-		return
-	fi
-	if [ -z "$HASH2" ]
-	then
-		echo "invalid revision: $TAG2"
-		return
-	fi
+	This script compares the ABI of 2 git revisions of the current
+	workspace. The output is a html report and a compilation log.
+
+	The objective is to make sure that applications built against
+	DSOs from the first revision can still run when executed using
+	the DSOs built from the second revision.
+
+	<rev1> and <rev2> are git commit id or tags.
+
+	Options:
+	  -h		show this help
+	  -j <num>	enable parallel compilation with <num> threads
+	  -v		show compilation logs on the console
+	  -d <dir>	change working directory (default is ${default_dst})
+	  -t <target>	the dpdk target to use (default is ${default_target})
+	  -f		overwrite existing files in destination directory
+
+	The script returns 0 on success, or the value of last failing
+	call of ${abicheck} (incompatible abi or the tool has run with errors).
+	The errors returned by ${abidump} are ignored.
+
+	END_OF_HELP
 }
 
-validate_args() {
-	if [ -z "$TAG1" ]
-	then
-		echo "Must Specify REV1"
-		return
-	fi
-	if [ -z "$TAG2" ]
-	then
-		echo "Must Specify REV2"
-		return
-	fi
-	if [ -z "$TARGET" ]
-	then
-		echo "Must Specify a build target"
+# log in the file, and on stdout if verbose
+# $1: level string
+# $2: string to be logged
+log() {
+	echo "$1: $2"
+	if [ "${verbose}" != "true" ]; then
+		echo "$1: $2" >&3
 	fi
 }
 
+# launch a command and log it, taking care of surrounding spaces with quotes
+cmd() {
+	local i s whitespace ret
+	s=""
+	whitespace="[[:space:]]"
+	for i in "$@"; do
+		if [[ $i =~ $whitespace ]]; then
+			i=\"$i\"
+		fi
+		if [ -z "$s" ]; then
+			s="$i"
+		else
+			s="$s $i"
+		fi
+	done
+
+	ret=0
+	log "CMD" "$s"
+	"$@" || ret=$?
+	if [ "$ret" != "0" ]; then
+		log "CMD" "previous command returned $ret"
+	fi
+
+	return $ret
+}
 
-cleanup_and_exit() {
-	rm -rf $ABI_DIR
-	git checkout $CURRENT_BRANCH
-	exit $1
+# redirect or copy stderr/stdout to a file
+# the syntax is unfamiliar, but it makes the rest of the
+# code easier to read, avoiding the use of pipes
+set_log_file() {
+	# save original stdout and stderr in fd 3 and 4
+	exec 3>&1
+	exec 4>&2
+	# create a new fd 5 that send to a file
+	exec 5> >(cat > $1)
+	# send stdout and stderr to fd 5
+	if [ "${verbose}" = "true" ]; then
+		exec 1> >(tee /dev/fd/5 >&3)
+		exec 2> >(tee /dev/fd/5 >&4)
+	else
+		exec 1>&5
+		exec 2>&5
+	fi
 }
 
 # Make sure we configure SHARED libraries
 # Also turn off IGB and KNI as those require kernel headers to build
 fixup_config() {
-	sed -i -e"$ a\CONFIG_RTE_BUILD_SHARED_LIB=y" config/defconfig_$TARGET
-	sed -i -e"$ a\CONFIG_RTE_NEXT_ABI=n" config/defconfig_$TARGET
-	sed -i -e"$ a\CONFIG_RTE_EAL_IGB_UIO=n" config/defconfig_$TARGET
-	sed -i -e"$ a\CONFIG_RTE_LIBRTE_KNI=n" config/defconfig_$TARGET
-	sed -i -e"$ a\CONFIG_RTE_KNI_KMOD=n" config/defconfig_$TARGET
+	local conf=config/defconfig_$target
+	cmd sed -i -e"$ a\CONFIG_RTE_BUILD_SHARED_LIB=y" $conf
+	cmd sed -i -e"$ a\CONFIG_RTE_NEXT_ABI=n" $conf
+	cmd sed -i -e"$ a\CONFIG_RTE_EAL_IGB_UIO=n" $conf
+	cmd sed -i -e"$ a\CONFIG_RTE_LIBRTE_KNI=n" $conf
+	cmd sed -i -e"$ a\CONFIG_RTE_KNI_KMOD=n" $conf
 }
 
-###########################################
-#START
-############################################
+# build dpdk for the given tag and dump abi
+# $1: hash of the revision
+gen_abi() {
+	local i
+
+	cmd git clone ${dpdkroot} ${dst}/${1}
+	cmd cd ${dst}/${1}
+
+	log "INFO" "Checking out version ${1} of the dpdk"
+	# Move to the old version of the tree
+	cmd git checkout ${1}
+
+	fixup_config
+
+	# Now configure the build
+	log "INFO" "Configuring DPDK ${1}"
+	cmd make config T=$target O=$target
+
+	# Checking abi compliance relies on using the dwarf information in
+	# the shared objects. Build with -g to include them.
+	log "INFO" "Building DPDK ${1}. This might take a moment"
+	cmd make -j$parallel O=$target V=1 EXTRA_CFLAGS="-g -Og -Wno-error" \
+	    EXTRA_LDFLAGS="-g" || log "INFO" "The build failed"
+
+	# Move to the lib directory
+	cmd cd ${PWD}/$target/lib
+	log "INFO" "Collecting ABI information for ${1}"
+	for i in *.so; do
+		[ -e "$i" ] || break
+		cmd $abidump ${i} -o $dst/${1}/${i}.dump -lver ${1} || true
+		# hack to ignore empty SymbolsInfo section (no public ABI)
+		if grep -q "'SymbolInfo' => {}," $dst/${1}/${i}.dump \
+				2> /dev/null; then
+			log "INFO" "${i} has no public ABI, remove dump file"
+			cmd rm -f $dst/${1}/${i}.dump
+		fi
+	done
+}
 
-#trap on ctrl-c to clean up
-trap cleanup_and_exit SIGINT
+verbose=false
+parallel=1
+dst=${default_dst}
+target=${default_target}
+force=0
+while getopts j:vd:t:fh ARG ; do
+	case $ARG in
+		j ) parallel=$OPTARG ;;
+		v ) verbose=true ;;
+		d ) dst=$OPTARG ;;
+		t ) target=$OPTARG ;;
+		f ) force=1 ;;
+		h ) print_usage ; exit 0 ;;
+		? ) print_usage ; exit 1 ;;
+	esac
+done
+shift $(($OPTIND - 1))
 
-if [ -z "$DPDK_MAKE_JOBS" ]
-then
-	# This counts the number of cpus on the system
-	if [ -e /usr/bin/lscpu ]
-	then
-		DPDK_MAKE_JOBS=`lscpu -p=cpu | grep -v "#" | wc -l`
-	else
-		DPDK_MAKE_JOBS=1
-	fi
+if [ $# != 2 ]; then
+	print_usage
+	exit 1
 fi
 
-#Save the current branch
-CURRENT_BRANCH=`git branch | grep \* | cut -d' ' -f2`
+tag1=$1
+tag2=$2
 
-if [ -z "$CURRENT_BRANCH" ]
-then
-	CURRENT_BRANCH=`git log --pretty=format:%H HEAD~1..HEAD`
-fi
+# convert path to absolute
+case "${dst}" in
+	/*) ;;
+	*) dst=${PWD}/${dst} ;;
+esac
+dpdkroot=$(readlink -e $(dirname $0)/..)
 
-if [ -n "$VERBOSE" ]
-then
-	export VERBOSE=/dev/stdout
-else
-	export VERBOSE=/dev/null
+if [ -e "${dst}" -a "$force" = 0 ]; then
+	echo "The ${dst} directory is not empty. Remove it, use another"
+	echo "one (-d <dir>), or force overriding (-f)"
+	exit 1
 fi
 
-# Validate that we have all the arguments we need
-res=$(validate_args)
-if [ -n "$res" ]
-then
-	echo $res
-	usage
-	cleanup_and_exit 1
-fi
+rm -rf ${dst}
+mkdir -p ${dst}
+set_log_file ${dst}/abi-check.log
+log "INFO" "Logs available in ${dst}/abi-check.log"
 
-HASH1=$(git show -s --format=%H "$TAG1" -- 2> /dev/null | tail -1)
-HASH2=$(git show -s --format=%H "$TAG2" -- 2> /dev/null | tail -1)
+command -v ${abicheck} || log "INFO" "Can't find ${abicheck} utility"
+command -v ${abidump} || log "INFO" "Can't find ${abidump} utility"
 
-# Make sure our tags exist
-res=$(validate_tags)
-if [ -n "$res" ]
-then
-	echo $res
-	cleanup_and_exit 1
-fi
+hash1=$(git show -s --format=%h "$tag1" -- 2> /dev/null | tail -1)
+hash2=$(git show -s --format=%h "$tag2" -- 2> /dev/null | tail -1)
 
 # Make hashes available in output for non-local reference
-TAG1="$TAG1 ($HASH1)"
-TAG2="$TAG2 ($HASH2)"
-
-ABICHECK=`which abi-compliance-checker 2>/dev/null`
-if [ $? -ne 0 ]
-then
-	log "INFO" "Can't find abi-compliance-checker utility"
-	cleanup_and_exit 1
-fi
-
-ABIDUMP=`which abi-dumper 2>/dev/null`
-if [ $? -ne 0 ]
-then
-	log "INFO" "Can't find abi-dumper utility"
-	cleanup_and_exit 1
-fi
+tag1="$tag1 ($hash1)"
+tag2="$tag2 ($hash2)"
 
-log "INFO" "We're going to check and make sure that applications built"
-log "INFO" "against DPDK DSOs from version $TAG1 will still run when executed"
-log "INFO" "against DPDK DSOs built from version $TAG2."
-log "INFO" ""
-
-# Check to make sure we have a clean tree
-git status | grep -q clean
-if [ $? -ne 0 ]
-then
-	log "WARN" "Working directory not clean, aborting"
-	cleanup_and_exit 1
+if [ "$hash1" = "$hash2" ]; then
+	log "ERROR" "$tag1 and $tag2 are the same revisions"
+	exit 1
 fi
 
-# Move to the root of the git tree
-cd $(dirname $0)/..
+cmd mkdir -p ${dst}
 
-log "INFO" "Checking out version $TAG1 of the dpdk"
-# Move to the old version of the tree
-git checkout $HASH1
+# dump abi for each revision
+gen_abi ${hash1}
+gen_abi ${hash2}
 
-fixup_config
+# compare the abi dumps
+cmd cd ${dst}
+ret=0
+list=""
+for i in ${hash2}/*.dump; do
+	name=`basename $i`
+	libname=${name%.dump}
 
-# Checking abi compliance relies on using the dwarf information in
-# The shared objects.  Thats only included in the DSO's if we build
-# with -g
-export EXTRA_CFLAGS="$EXTRA_CFLAGS -g -O0"
-export EXTRA_LDFLAGS="$EXTRA_LDFLAGS -g"
-
-# Now configure the build
-log "INFO" "Configuring DPDK $TAG1"
-make config T=$TARGET O=$TARGET > $VERBOSE 2>&1
-
-log "INFO" "Building DPDK $TAG1. This might take a moment"
-make -j$DPDK_MAKE_JOBS O=$TARGET > $VERBOSE 2>&1
-
-if [ $? -ne 0 ]
-then
-	log "INFO" "THE BUILD FAILED.  ABORTING"
-	cleanup_and_exit 1
-fi
+	if [ ! -f ${hash1}/$name ]; then
+		log "INFO" "$NAME does not exist in $tag1. skipping..."
+		continue
+	fi
 
-# Move to the lib directory
-cd $TARGET/lib
-log "INFO" "COLLECTING ABI INFORMATION FOR $TAG1"
-for i in `ls *.so`
-do
-	$ABIDUMP $i -o $ABI_DIR/$i-ABI-0.dump -lver $HASH1
+	local_ret=0
+	cmd $abicheck -l $libname \
+	    -old ${hash1}/$name -new ${hash2}/$name || local_ret=$?
+	if [ $local_ret != 0 ]; then
+		log "NOTICE" "$abicheck returned $local_ret"
+		ret=$local_ret
+		list="$list $libname"
+	fi
 done
-cd ../..
-
-# Now clean the tree, checkout the second tag, and rebuild
-git clean -f -d
-git reset --hard
-# Move to the new version of the tree
-log "INFO" "Checking out version $TAG2 of the dpdk"
-git checkout $HASH2
-
-fixup_config
-
-# Now configure the build
-log "INFO" "Configuring DPDK $TAG2"
-make config T=$TARGET O=$TARGET > $VERBOSE 2>&1
-
-log "INFO" "Building DPDK $TAG2. This might take a moment"
-make -j$DPDK_MAKE_JOBS O=$TARGET > $VERBOSE 2>&1
 
-if [ $? -ne 0 ]
-then
-	log "INFO" "THE BUILD FAILED.  ABORTING"
-	cleanup_and_exit 1
+if [ $ret != 0 ]; then
+	log "NOTICE" "ABI may be incompatible, check reports/logs for details."
+	log "NOTICE" "Incompatible list: $list"
+else
+	log "NOTICE" "No error detected, ABI is compatible."
 fi
 
-cd $TARGET/lib
-log "INFO" "COLLECTING ABI INFORMATION FOR $TAG2"
-for i in `ls *.so`
-do
-	$ABIDUMP $i -o $ABI_DIR/$i-ABI-1.dump -lver $HASH2
-done
-cd ../..
-
-# Start comparison of ABI dumps
-for i in `ls $ABI_DIR/*-1.dump`
-do
-	NEWNAME=`basename $i`
-	OLDNAME=`basename $i | sed -e"s/1.dump/0.dump/"`
-	LIBNAME=`basename $i | sed -e"s/-ABI-1.dump//"`
-
-	if [ ! -f $ABI_DIR/$OLDNAME ]
-	then
-		log "INFO" "$OLDNAME DOES NOT EXIST IN $TAG1. SKIPPING..."
-	fi
-
-	#compare the abi dumps
-	$ABICHECK -l $LIBNAME -old $ABI_DIR/$OLDNAME -new $ABI_DIR/$NEWNAME
-done
+log "INFO" "Logs are in ${dst}/abi-check.log"
+log "INFO" "HTML reports are in ${dst}/compat_reports directory"
 
-git reset --hard
-log "INFO" "ABI CHECK COMPLETE.  REPORTS ARE IN compat_report directory"
-cleanup_and_exit 0
+exit $ret
-- 
2.11.0

Re: [dpdk-dev] [PATCH v5] devtools: rework abi checker script

[Neil Horman]

On Thu, Oct 05, 2017 at 09:53:27AM +0200, Olivier Matz wrote:
> The initial version of the script had some limitations:
> - cannot work on a non-clean workspace
> - environment variables are not documented
> - no compilation log in case of failure
> - return success even it abi is incompatible
> 
> This patch addresses these issues and rework the code.
> 
> Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
> Acked-by: Neil Horman <nhorman@tuxdriver.com>
> ---
> 
> v4->v5:
> - Add a log when shared lib has no public ABI
> 
> v3->v4:
> - clarify logs on incompatible abi
> - log when an error returned an error
> - [really] fix the report path
> - log the output of make config in the proper file
> 
> v2->v3:
> - fix when not launched from dpdk root dir
> - use "-Og -Wno-error" instead of "-O0"
> - fix typo in commit log
> 
> v1->v2:
> - use /usr/bin/env to find bash (which is required)
> - fix displayed path to html reports
> - reword help for -f option
> 
>  devtools/validate-abi.sh | 397 ++++++++++++++++++++++++-----------------------
>  1 file changed, 205 insertions(+), 192 deletions(-)
> 

To reiterate with updated logging
Acked-by: Neil Horman <nhorman@tuxdriver.com>

Re: [dpdk-dev] [PATCH v5] devtools: rework abi checker script

[Thomas Monjalon]

05/10/2017 09:53, Olivier Matz:
> The initial version of the script had some limitations:
> - cannot work on a non-clean workspace
> - environment variables are not documented
> - no compilation log in case of failure
> - return success even it abi is incompatible
> 
> This patch addresses these issues and rework the code.
> 
> Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
> Acked-by: Neil Horman <nhorman@tuxdriver.com>

Applied, thanks