From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from NAM01-BY2-obe.outbound.protection.outlook.com (mail-by2nam01on0072.outbound.protection.outlook.com [104.47.34.72]) by dpdk.org (Postfix) with ESMTP id 855791B9FC for ; Wed, 25 Oct 2017 17:10:59 +0200 (CEST) Received: from CY4PR03CA0075.namprd03.prod.outlook.com (10.171.242.144) by CO2PR03MB2360.namprd03.prod.outlook.com (10.166.93.20) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384_P256) id 15.20.156.4; Wed, 25 Oct 2017 15:10:57 +0000 Received: from BN1AFFO11FD045.protection.gbl (2a01:111:f400:7c10::106) by CY4PR03CA0075.outlook.office365.com (2603:10b6:910:4d::16) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384) id 15.20.178.6 via Frontend Transport; Wed, 25 Oct 2017 15:10:56 +0000 Authentication-Results: spf=fail (sender IP is 192.88.168.50) smtp.mailfrom=nxp.com; NXP1.onmicrosoft.com; dkim=none (message not signed) header.d=none;NXP1.onmicrosoft.com; dmarc=fail action=none header.from=nxp.com; Received-SPF: Fail (protection.outlook.com: domain of nxp.com does not designate 192.88.168.50 as permitted sender) receiver=protection.outlook.com; client-ip=192.88.168.50; helo=tx30smr01.am.freescale.net; Received: from tx30smr01.am.freescale.net (192.88.168.50) by BN1AFFO11FD045.mail.protection.outlook.com (10.58.53.60) with Microsoft SMTP Server (version=TLS1_0, cipher=TLS_RSA_WITH_AES_256_CBC_SHA) id 15.20.156.4 via Frontend Transport; Wed, 25 Oct 2017 15:10:56 +0000 Received: from netperf2.ap.freescale.net ([10.232.133.164]) by tx30smr01.am.freescale.net (8.14.3/8.14.0) with ESMTP id v9PFAECb009577; Wed, 25 Oct 2017 08:10:51 -0700 From: Akhil Goyal To: CC: , , , , , , , , , , , , Date: Wed, 25 Oct 2017 20:37:24 +0530 Message-ID: <20171025150727.30364-8-akhil.goyal@nxp.com> X-Mailer: git-send-email 2.9.3 In-Reply-To: <20171025150727.30364-1-akhil.goyal@nxp.com> References: <20171024141545.30837-1-akhil.goyal@nxp.com> <20171025150727.30364-1-akhil.goyal@nxp.com> X-EOPAttributedMessage: 0 X-Matching-Connectors: 131534178565461074; (91ab9b29-cfa4-454e-5278-08d120cd25b8); () X-Forefront-Antispam-Report: CIP:192.88.168.50; IPV:NLI; CTRY:US; EFV:NLI; SFV:NSPM; SFS:(10009020)(6009001)(336005)(39380400002)(346002)(376002)(39860400002)(2980300002)(1110001)(1109001)(339900001)(199003)(189002)(2351001)(106466001)(105606002)(16586007)(8936002)(4326008)(2906002)(68736007)(50466002)(54906003)(50226002)(33646002)(5890100001)(86362001)(8656006)(8676002)(5003940100001)(15650500001)(48376002)(305945005)(85426001)(81166006)(81156014)(356003)(47776003)(76176999)(5660300001)(104016004)(77096006)(7416002)(316002)(6916009)(498600001)(97736004)(189998001)(50986999)(1076002)(6666003)(36756003)(2950100002)(53936002); DIR:OUT; SFP:1101; SCL:1; SRVR:CO2PR03MB2360; H:tx30smr01.am.freescale.net; FPR:; SPF:Fail; PTR:InfoDomainNonexistent; A:1; MX:1; LANG:en; X-Microsoft-Exchange-Diagnostics: 1; BN1AFFO11FD045; 1:wgEqv0lPohblU+fr9hcDqtc0INqNlBOmaJgXUDZKk/U81IeNDzWoFvFV2hUN5CHCT2XjOLeejuWucRQYfVccD/7+lr5B7uxhpms5mdIcbFdKt6g6+2V7jCGkLvRs1ZXB MIME-Version: 1.0 Content-Type: text/plain X-MS-PublicTrafficType: Email X-MS-Office365-Filtering-Correlation-Id: 3d99a60b-82db-469f-9452-08d51bba97ae X-Microsoft-Antispam: UriScan:; BCL:0; PCL:0; RULEID:(22001)(4534020)(4628075)(201703131517081)(2017052603199); SRVR:CO2PR03MB2360; X-Microsoft-Exchange-Diagnostics: 1; CO2PR03MB2360; 3:yQwmnXF7gFc5BTvil5tORJQXmIdSyh9DCWgNyQQzrifuCvW1S6ECOqYaisY0zJlYcV3YykQ4IzVv5xMkr/AworGF/94sLVE6suRZiUaQQWUbe9dDGh5e0ItB9YNaepUfgSmJwK9y58W0kIXHEhonUfaGIeSW0hKTWMxFAwZCX+3IbYclAOizU/sQ7IMXo3mlSN7VESzMkIkk3A5PRsbwYCrv2XO0KF2UdSDvD8myE2/1KtFGaR5cF/7FevfpYr2h8N3LA8WW+m6FHStXWFdQYSEa3Sh8YAC97C3yKCtnOlCvI81612bkFOUDnA1CJItv926zV8yVlXeO5+Pe2HF6Vmig0a5hwP+3S7CjrKPnYNM=; 25:Mupa7zLssNLk9CQl4OGB6PLIB69Eznl4KPgRGQioc2y7BnjAOdWTIVMHB3QLHirlyg7AVla69Or+ghLGqfwfP/b00eq+wXPFRfIorrpS/Gma7nxzMBrb24jDxjCvMuJWWvjQ0eRQvaRYY6+EBXJDtxaMNouO+xEwdrBGfeb/Z5XTNcuVSAv3Tj+gQbZwieTRIIpGfTfrfogtV8o94n2AbXFLHFP1LB633kAf7b30yYKqezj90IfnhYtNGVsYDag/DM8nQs4RGgqPK6oNwNoxVz3RFuzp6U7TewWa9v+bPrsRgatG69jOt2nZvHXTouBEsC61bnY6orDeFYVkkoWERA== X-MS-TrafficTypeDiagnostic: CO2PR03MB2360: X-Microsoft-Exchange-Diagnostics: 1; CO2PR03MB2360; 31:eIx7zQ189qiy4GTHEXvmXplZBE1EkTlucJMQS7ZLHBzdx1knIYyD7eylnOC21fyzYWk7Te8CntR8WKpcrETdD3mqu64Z8t8aJHQqh6EqMsIPUOn1WTz34lYpNdI/T0jSGNnqCuDVkA1Pboxlichow7a6n575ChL9uOR9vidRxcGcvYjGQJBNBjELASugEoOZzRVo7N7QKBxUnofmnbE0Xm59ZDPgnoFpI9yOPUnTcuE=; 4:KtfYcWTPdMDsGze2h8ByHU3cFJ1t7EpYBh+c2M0ZVtu38RjemnoAXERONTJhdN3EFxwbyEWNOzNwBk059xLTx9VLWwyMUzepV0EA9DbtojM7uZ/FaWqrCP+WhPsUgxhZNe059IfG1+Fkyy69ne4HpQh2oc20Xn0H+UjjuIzN5A1faGhmkVm9bcO/bQPAfWNyhxc0E0Vl6AqI89Ic0MloL1oEXz69by0jt+g/X2Y/koH//EA1Ql8KuhRgjFDaJ95KX1Ja8A0MuYIduL59m9rx9U6f6FZEFSI5mR8BOw51Jw6ypJatv2Du8gLl+5DG3Lr54Z0LA2OMjymn70f49pzF2N5NJhhD95GONf4ujokpJ6E= X-Exchange-Antispam-Report-Test: UriScan:(192374486261705)(185117386973197)(228905959029699); X-Microsoft-Antispam-PRVS: X-Exchange-Antispam-Report-CFA-Test: BCL:0; PCL:0; RULEID:(100000700101)(100105000095)(100000701101)(100105300095)(100000702101)(100105100095)(6095135)(2401047)(8121501046)(5005006)(93006095)(93001095)(100000703101)(100105400095)(3231020)(3002001)(10201501046)(6055026)(6096035)(20161123561025)(20161123556025)(20161123563025)(20161123565025)(201703131430075)(201703131433075)(201703131448075)(201703161259150)(201703151042153)(20161123559100)(201708071742011)(100000704101)(100105200095)(100000705101)(100105500095); SRVR:CO2PR03MB2360; BCL:0; PCL:0; RULEID:(100000800101)(100110000095)(100000801101)(100110300095)(100000802101)(100110100095)(100000803101)(100110400095)(400006)(100000804101)(100110200095)(100000805101)(100110500095); SRVR:CO2PR03MB2360; X-Forefront-PRVS: 0471B73328 X-Microsoft-Exchange-Diagnostics: =?us-ascii?Q?1; CO2PR03MB2360; 23:wO/e8BPdSrATvGs9sakMEA/75x4CKQ7UcQRJq1uzA?= =?us-ascii?Q?y9ic4VegRAkWdGeM9rW0TyGSvDTCpZUo/N03rn1Lvmt/k/0hb1itfxzH/qHD?= =?us-ascii?Q?GYfk4xtyfORnniidRvxjUUCI8KMgBYQUOAL+ZsiC3e9fynFnUg15LBY5ZcyX?= =?us-ascii?Q?JsTBfOz6NO0njEgeuNT4claZQyTco5D52cLZyYruN+t0OPSjglbyH7cWGcwk?= =?us-ascii?Q?sMJxiBOOAYdhz7DJaXTjGgkmABW5gFWIIcBlHLU6aXqQwLkYJ7Eco66gFzkW?= =?us-ascii?Q?oP+6BP3f8OdvoM6aaY+VD/K+kWVmg/AzlBt+t+xHpkzpgtvu3znr5+RXtB7a?= =?us-ascii?Q?Kn0hOXFVOeBX3y0VCDyyMxkfU5SHEVjF7Uw9V3ZeI0PbKDgqgvy7B9myt7V5?= =?us-ascii?Q?3m5WuCLpelER/wJWfwSY7Mr4kjO8Zzuv0Q3YEfqdjELfKDGhofvVSorqfsmh?= =?us-ascii?Q?8hPSOTuq50XnFxSxaNdGENMqQ+k4pTO/bxzTb88Z/oSdUcMr2ZCPEEgzN5Ui?= =?us-ascii?Q?Fj1kPSb+JHV5y99HO9kPyN2Ycu97DteC1UU7a10WcmyxOydjUx1mDgNxkTlR?= =?us-ascii?Q?4E08KWhSHoIOUnJd2O8i7WcjbY/Y6+QH2bWfPEmV38oqmFLelDBH1mtMrc/U?= =?us-ascii?Q?UdUa+uglEw0sxiCtG4JwI/5R2q483MKl0mS6CRRR4c7d667XHKdBuKufJ6XI?= =?us-ascii?Q?sinEDY9pPertTJc1I2r8NIAbHR73k2zfoLd5t+tWdMWM3hMFSmLTVTuvr1ZF?= =?us-ascii?Q?aX+tJ1r/5eh8FeUX/BHVCktZaabHdAyU4DOTO2qzi/tMhz5hJeOSPukuc78z?= =?us-ascii?Q?87soYQ10UswHAG0/QXJMIXu5zNgOZfXO6HJN9bMo+FOQKQi+6AYzWSScg17S?= =?us-ascii?Q?Gk/gck0ud3q0heGRQ8AB6ed1Adp4lDbbIMqsnzzWtdWU/uzdfv7kuNnD03Oz?= =?us-ascii?Q?XXPRVqzr1WHazuweUqx4PJr9Obe5+W9KbcU1UEAsQG+WOtJqBBTDXaDLtwEl?= =?us-ascii?Q?MbdSHDbQnR5hccZR5XDghsDl/ui3RXHXOv+PbkAefkcQVF6O50UC2dTG3lWZ?= =?us-ascii?Q?k3DC6/u6q8wnv8FPCChZGboxIr4bTj5AF4nix08IWmEIZnWD57jVOuAwdyEJ?= =?us-ascii?Q?ZrCtIJ8Bf//dIEHFsiwGuz8sklu0RITaS4CjoMmh0QqpW2L+1j62KZKwqyDU?= =?us-ascii?Q?1/eOR930LbNezVQr/bdJxXNn/5J/E4//onlVru5w3a4JBfQLOLiSEsi2CKM4?= =?us-ascii?Q?UojR5be974ffkPmkyM=3D?= X-Microsoft-Exchange-Diagnostics: 1; CO2PR03MB2360; 6:UBeCfSJT/dHJ76MEsvN5hydr58QpxNMUUpyf0d9T/JSi4nHAqMF7KXYljjgnL1xQLGCIqN3metVPCazEby0N+i1lDn/ZfmaJl9MfncCBTY3rnIg/IFIjT7YXTxEiDQxOuSFf4HjTwvPixKscIIo/C/JQUpNn27UdH/FvOPNqBfMZRimg7iBOYVAKU64i7YXIh8PBED4SV2Vb5vwIfwbKdvAQMTL8GQDojM4F5zY2rAcJIYkok5IybVwzVGWKFikcAuGwa+bdSKZM41qTDrzazvVdDDkCfM1UycQZuknIEQh7en2pgwLA2Xu1u/tk9E9+vISIt78+SAZ0FFEK2u1SIw==; 5:JlgZPljYpqEtrXekx7NKqkVs3lmHsJ3i2H8+9Yrq3CbydJKIr6FCPpFj+l9ygTZtBrI4LiBcIMabSbPAwvf0C5gDXTMX4WsR/gpGCxVhv28yLL/QaX2gpHnbhWd3hqz9Pw9ZJItMJmW3xAs9vpL7rA==; 24:3OjegSG+mZJYdeI4buH+HiU4DU07KDY+py5CR8SsJ00JESzG263EHy5/C5hfWhUiJm2e2DnJywxBjoS1toGRRSza5wfv8VCJYtwxodL1pKU=; 7:Rrrja2oreSO/CY6wA3MDbRrRuT1T7qJsnWYDgeLF80A5MWviDELqo0uVQt9houxC7NpxN1B+Kwl+DajY7gN18A/eLMRtYr3Ld+S99reVsifRfsvDc8O7/JiYPTNT8MvJWLydsijXkODyDtYrU0gi4Y9ax2/3NB5yJntKEGWbgltXIJbkEGkd65REhqvAtGwAOPh0xu8oB9K9MyiWr31iqlYpDcB4fShuRsY9b6B1A+Y= SpamDiagnosticOutput: 1:99 SpamDiagnosticMetadata: NSPM X-MS-Exchange-CrossTenant-OriginalArrivalTime: 25 Oct 2017 15:10:56.3745 (UTC) X-MS-Exchange-CrossTenant-Network-Message-Id: 3d99a60b-82db-469f-9452-08d51bba97ae X-MS-Exchange-CrossTenant-Id: 5afe0b00-7697-4969-b663-5eab37d5f47e X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=5afe0b00-7697-4969-b663-5eab37d5f47e; Ip=[192.88.168.50]; Helo=[tx30smr01.am.freescale.net] X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem X-MS-Exchange-Transport-CrossTenantHeadersStamped: CO2PR03MB2360 Subject: [dpdk-dev] [PATCH v6 07/10] doc: add details of rte security X-BeenThere: dev@dpdk.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: DPDK patches and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 25 Oct 2017 15:11:00 -0000 Signed-off-by: Hemant Agrawal Signed-off-by: Akhil Goyal Acked-by: John McNamara --- doc/guides/prog_guide/index.rst | 1 + doc/guides/prog_guide/rte_security.rst | 564 +++++++++++++++++++++++++++++++++ 2 files changed, 565 insertions(+) create mode 100644 doc/guides/prog_guide/rte_security.rst diff --git a/doc/guides/prog_guide/index.rst b/doc/guides/prog_guide/index.rst index fbd2a72..9759264 100644 --- a/doc/guides/prog_guide/index.rst +++ b/doc/guides/prog_guide/index.rst @@ -47,6 +47,7 @@ Programmer's Guide traffic_metering_and_policing traffic_management cryptodev_lib + rte_security link_bonding_poll_mode_drv_lib timer_lib hash_lib diff --git a/doc/guides/prog_guide/rte_security.rst b/doc/guides/prog_guide/rte_security.rst new file mode 100644 index 0000000..71be036 --- /dev/null +++ b/doc/guides/prog_guide/rte_security.rst @@ -0,0 +1,564 @@ +.. BSD LICENSE + Copyright 2017 NXP. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + * Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + * Neither the name of NXP nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +Security Library +================ + +The security library provides a framework for management and provisioning +of security protocol operations offloaded to hardware based devices. The +library defines generic APIs to create and free security sessions which can +support full protocol offload as well as inline crypto operation with +NIC or crypto devices. The framework currently only supports the IPSec protocol +and associated operations, other protocols will be added in future. + +Design Principles +----------------- + +The security library provides an additional offload capability to an existing +crypto device and/or ethernet device. + +.. code-block:: console + + +---------------+ + | rte_security | + +---------------+ + \ / + +-----------+ +--------------+ + | NIC PMD | | CRYPTO PMD | + +-----------+ +--------------+ + +.. note:: + + Currently, the security library does not support the case of multi-process. + It will be updated in the future releases. + +The supported offload types are explained in the sections below. + +Inline Crypto +~~~~~~~~~~~~~ + +RTE_SECURITY_ACTION_TYPE_INLINE_CRYPTO: +The crypto processing for security protocol (e.g. IPSec) is processed +inline during receive and transmission on NIC port. The flow based +security action should be configured on the port. + +Ingress Data path - The packet is decrypted in RX path and relevant +crypto status is set in Rx descriptors. After the successful inline +crypto processing the packet is presented to host as a regular Rx packet +however all security protocol related headers are still attached to the +packet. e.g. In case of IPSec, the IPSec tunnel headers (if any), +ESP/AH headers will remain in the packet but the received packet +contains the decrypted data where the encrypted data was when the packet +arrived. The driver Rx path check the descriptors and and based on the +crypto status sets additional flags in the rte_mbuf.ol_flags field. + +.. note:: + + The underlying device may not support crypto processing for all ingress packet + matching to a particular flow (e.g. fragmented packets), such packets will + be passed as encrypted packets. It is the responsibility of application to + process such encrypted packets using other crypto driver instance. + +Egress Data path - The software prepares the egress packet by adding +relevant security protocol headers. Only the data will not be +encrypted by the software. The driver will accordingly configure the +tx descriptors. The hardware device will encrypt the data before sending the +the packet out. + +.. note:: + + The underlying device may support post encryption TSO. + +.. code-block:: console + + Egress Data Path + | + +--------|--------+ + | egress IPsec | + | | | + | +------V------+ | + | | SADB lookup | | + | +------|------+ | + | +------V------+ | + | | Tunnel | | <------ Add tunnel header to packet + | +------|------+ | + | +------V------+ | + | | ESP | | <------ Add ESP header without trailer to packet + | | | | <------ Mark packet to be offloaded, add trailer + | +------|------+ | meta-data to mbuf + +--------V--------+ + | + +--------V--------+ + | L2 Stack | + +--------|--------+ + | + +--------V--------+ + | | + | NIC PMD | <------ Set hw context for inline crypto offload + | | + +--------|--------+ + | + +--------|--------+ + | HW ACCELERATED | <------ Packet Encryption and + | NIC | Authentication happens inline + | | + +-----------------+ + + +Inline protocol offload +~~~~~~~~~~~~~~~~~~~~~~~ + +RTE_SECURITY_ACTION_TYPE_INLINE_PROTOCOL: +The crypto and protocol processing for security protocol (e.g. IPSec) +is processed inline during receive and transmission. The flow based +security action should be configured on the port. + +Ingress Data path - The packet is decrypted in the RX path and relevant +crypto status is set in the Rx descriptors. After the successful inline +crypto processing the packet is presented to the host as a regular Rx packet +but all security protocol related headers are optionally removed from the +packet. e.g. in the case of IPSec, the IPSec tunnel headers (if any), +ESP/AH headers will be removed from the packet and the received packet +will contains the decrypted packet only. The driver Rx path checks the +descriptors and based on the crypto status sets additional flags in +``rte_mbuf.ol_flags`` field. + +.. note:: + + The underlying device in this case is stateful. It is expected that + the device shall support crypto processing for all kind of packets matching + to a given flow, this includes fragmented packets (post reassembly). + E.g. in case of IPSec the device may internally manage anti-replay etc. + It will provide a configuration option for anti-replay behavior i.e. to drop + the packets or pass them to driver with error flags set in the descriptor. + +Egress Data path - The software will send the plain packet without any +security protocol headers added to the packet. The driver will configure +the security index and other requirement in tx descriptors. +The hardware device will do security processing on the packet that includes +adding the relevant protocol headers and encrypting the data before sending +the packet out. The software should make sure that the buffer +has required head room and tail room for any protocol header addition. The +software may also do early fragmentation if the resultant packet is expected +to cross the MTU size. + + +.. note:: + + The underlying device will manage state information required for egress + processing. E.g. in case of IPSec, the seq number will be added to the + packet, however the device shall provide indication when the sequence number + is about to overflow. The underlying device may support post encryption TSO. + +.. code-block:: console + + Egress Data Path + | + +--------|--------+ + | egress IPsec | + | | | + | +------V------+ | + | | SADB lookup | | + | +------|------+ | + | +------V------+ | + | | Desc | | <------ Mark packet to be offloaded + | +------|------+ | + +--------V--------+ + | + +--------V--------+ + | L2 Stack | + +--------|--------+ + | + +--------V--------+ + | | + | NIC PMD | <------ Set hw context for inline crypto offload + | | + +--------|--------+ + | + +--------|--------+ + | HW ACCELERATED | <------ Add tunnel, ESP header etc header to + | NIC | packet. Packet Encryption and + | | Authentication happens inline. + +-----------------+ + + +Lookaside protocol offload +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +RTE_SECURITY_ACTION_TYPE_LOOKASIDE_PROTOCOL: +This extends librte_cryptodev to support the programming of IPsec +Security Association (SA) as part of a crypto session creation including +the definition. In addition to standard crypto processing, as defined by +the cryptodev, the security protocol processing is also offloaded to the +crypto device. + +Decryption: The packet is sent to the crypto device for security +protocol processing. The device will decrypt the packet and it will also +optionally remove additional security headers from the packet. +E.g. in case of IPSec, IPSec tunnel headers (if any), ESP/AH headers +will be removed from the packet and the decrypted packet may contain +plain data only. + +.. note:: + + In case of IPSec the device may internally manage anti-replay etc. + It will provide a configuration option for anti-replay behavior i.e. to drop + the packets or pass them to driver with error flags set in descriptor. + +Encryption: The software will submit the packet to cryptodev as usual +for encryption, the hardware device in this case will also add the relevant +security protocol header along with encrypting the packet. The software +should make sure that the buffer has required head room and tail room +for any protocol header addition. + +.. note:: + + In the case of IPSec, the seq number will be added to the packet, + It shall provide an indication when the sequence number is about to + overflow. + +.. code-block:: console + + Egress Data Path + | + +--------|--------+ + | egress IPsec | + | | | + | +------V------+ | + | | SADB lookup | | <------ SA maps to cryptodev session + | +------|------+ | + | +------|------+ | + | | \--------------------\ + | | Crypto | | | <- Crypto processing through + | | /----------------\ | inline crypto PMD + | +------|------+ | | | + +--------V--------+ | | + | | | + +--------V--------+ | | create <-- SA is added to hw + | L2 Stack | | | inline using existing create + +--------|--------+ | | session sym session APIs + | | | | + +--------V--------+ +---|---|----V---+ + | | | \---/ | | <--- Add tunnel, ESP header etc + | NIC PMD | | INLINE | | header to packet.Packet + | | | CRYPTO PMD | | Encryption/Decryption and + +--------|--------+ +----------------+ Authentication happens + | inline. + +--------|--------+ + | NIC | + +--------|--------+ + V + +Device Features and Capabilities +--------------------------------- + +Device Capabilities For Security Operations +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The device (crypto or ethernet) capabilities which support security operations, +are defined by the security action type, security protocol, protocol +capabilities and corresponding crypto capabilities for security. For the full +scope of the Security capability see definition of rte_security_capability +structure in the *DPDK API Reference*. + +.. code-block:: c + + struct rte_security_capability; + +Each driver (crypto or ethernet) defines its own private array of capabilities +for the operations it supports. Below is an example of the capabilities for a +PMD which supports the IPSec protocol. + +.. code-block:: c + + static const struct rte_security_capability pmd_security_capabilities[] = { + { /* IPsec Lookaside Protocol offload ESP Tunnel Egress */ + .action = RTE_SECURITY_ACTION_TYPE_LOOKASIDE_PROTOCOL, + .protocol = RTE_SECURITY_PROTOCOL_IPSEC, + .ipsec = { + .proto = RTE_SECURITY_IPSEC_SA_PROTO_ESP, + .mode = RTE_SECURITY_IPSEC_SA_MODE_TUNNEL, + .direction = RTE_SECURITY_IPSEC_SA_DIR_EGRESS, + .options = { 0 } + }, + .crypto_capabilities = pmd_capabilities + }, + { /* IPsec Lookaside Protocol offload ESP Tunnel Ingress */ + .action = RTE_SECURITY_ACTION_TYPE_LOOKASIDE_PROTOCOL, + .protocol = RTE_SECURITY_PROTOCOL_IPSEC, + .ipsec = { + .proto = RTE_SECURITY_IPSEC_SA_PROTO_ESP, + .mode = RTE_SECURITY_IPSEC_SA_MODE_TUNNEL, + .direction = RTE_SECURITY_IPSEC_SA_DIR_INGRESS, + .options = { 0 } + }, + .crypto_capabilities = pmd_capabilities + }, + { + .action = RTE_SECURITY_ACTION_TYPE_NONE + } + }; + static const struct rte_cryptodev_capabilities pmd_capabilities[] = { + { /* SHA1 HMAC */ + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, + .sym = { + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, + .auth = { + .algo = RTE_CRYPTO_AUTH_SHA1_HMAC, + .block_size = 64, + .key_size = { + .min = 64, + .max = 64, + .increment = 0 + }, + .digest_size = { + .min = 12, + .max = 12, + .increment = 0 + }, + .aad_size = { 0 }, + .iv_size = { 0 } + } + } + }, + { /* AES CBC */ + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, + .sym = { + .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER, + .cipher = { + .algo = RTE_CRYPTO_CIPHER_AES_CBC, + .block_size = 16, + .key_size = { + .min = 16, + .max = 32, + .increment = 8 + }, + .iv_size = { + .min = 16, + .max = 16, + .increment = 0 + } + } + } + } + } + + +Capabilities Discovery +~~~~~~~~~~~~~~~~~~~~~~ + +Discovering the features and capabilities of a driver (crypto/ethernet) +is achieved through the ``rte_security_capabilities_get()`` function. + +.. code-block:: c + + const struct rte_security_capability *rte_security_capabilities_get(uint16_t id); + +This allows the user to query a specific driver and get all device +security capabilities. It returns an array of ``rte_security_capability`` structures +which contains all the capabilities for that device. + +Security Session Create/Free +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Security Sessions are created to store the immutable fields of a particular Security +Association for a particular protocol which is defined by a security session +configuration structure which is used in the operation processing of a packet flow. +Sessions are used to manage protocol specific information as well as crypto parameters. +Security sessions cache this immutable data in a optimal way for the underlying PMD +and this allows further acceleration of the offload of Crypto workloads. + +The Security framework provides APIs to create and free sessions for crypto/ethernet +devices, where sessions are mempool objects. It is the application's responsibility +to create and manage the session mempools. The mempool object size should be able to +accommodate the driver's private data of security session. + +Once the session mempools have been created, ``rte_security_session_create()`` +is used to allocate and initialize a session for the required crypto/ethernet device. + +Session APIs need a parameter ``rte_security_ctx`` to identify the crypto/ethernet +security ops. This parameter can be retrieved using the APIs +``rte_cryptodev_get_sec_ctx()`` (for crypto device) or ``rte_eth_dev_get_sec_ctx`` +(for ethernet port). + +Sessions already created can be updated with ``rte_security_session_update()``. + +When a session is no longer used, the user must call ``rte_security_session_destroy()`` +to free the driver private session data and return the memory back to the mempool. + +For look aside protocol offload to hardware crypto device, the ``rte_crypto_op`` +created by the application is attached to the security session by the API +``rte_security_attach_session()``. + +For Inline Crypto and Inline protocol offload, device specific defined metadata is +updated in the mbuf using ``rte_security_set_pkt_metadata()`` if +``DEV_TX_OFFLOAD_SEC_NEED_MDATA`` is set. + +Security session configuration +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Security Session configuration structure is defined as ``rte_security_session_conf`` + +.. code-block:: c + + struct rte_security_session_conf { + enum rte_security_session_action_type action_type; + /**< Type of action to be performed on the session */ + enum rte_security_session_protocol protocol; + /**< Security protocol to be configured */ + union { + struct rte_security_ipsec_xform ipsec; + struct rte_security_macsec_xform macsec; + }; + /**< Configuration parameters for security session */ + struct rte_crypto_sym_xform *crypto_xform; + /**< Security Session Crypto Transformations */ + }; + +The configuration structure reuses the ``rte_crypto_sym_xform`` struct for crypto related +configuration. The ``rte_security_session_action_type`` struct is used to specify whether the +session is configured for Lookaside Protocol offload or Inline Crypto or Inline Protocol +Offload. + +.. code-block:: c + + enum rte_security_session_action_type { + RTE_SECURITY_ACTION_TYPE_NONE, + /**< No security actions */ + RTE_SECURITY_ACTION_TYPE_INLINE_CRYPTO, + /**< Crypto processing for security protocol is processed inline + * during transmission */ + RTE_SECURITY_ACTION_TYPE_INLINE_PROTOCOL, + /**< All security protocol processing is performed inline during + * transmission */ + RTE_SECURITY_ACTION_TYPE_LOOKASIDE_PROTOCOL + /**< All security protocol processing including crypto is performed + * on a lookaside accelerator */ + }; + +The ``rte_security_session_protocol`` is defined as + +.. code-block:: c + + enum rte_security_session_protocol { + RTE_SECURITY_PROTOCOL_IPSEC, + /**< IPsec Protocol */ + RTE_SECURITY_PROTOCOL_MACSEC, + /**< MACSec Protocol */ + }; + +Currently the library defines configuration parameters for IPSec only. For other +protocols like MACSec, structures and enums are defined as place holders which +will be updated in the future. + +IPsec related configuration parameters are defined in ``rte_security_ipsec_xform`` + +.. code-block:: c + + struct rte_security_ipsec_xform { + uint32_t spi; + /**< SA security parameter index */ + uint32_t salt; + /**< SA salt */ + struct rte_security_ipsec_sa_options options; + /**< various SA options */ + enum rte_security_ipsec_sa_direction direction; + /**< IPSec SA Direction - Egress/Ingress */ + enum rte_security_ipsec_sa_protocol proto; + /**< IPsec SA Protocol - AH/ESP */ + enum rte_security_ipsec_sa_mode mode; + /**< IPsec SA Mode - transport/tunnel */ + struct rte_security_ipsec_tunnel_param tunnel; + /**< Tunnel parameters, NULL for transport mode */ + }; + + +Security API +~~~~~~~~~~~~ + +The rte_security Library API is described in the *DPDK API Reference* document. + +Flow based Security Session +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +In the case of NIC based offloads, the security session specified in the +'rte_flow_action_security' must be created on the same port as the +flow action that is being specified. + +The ingress/egress flow attribute should match that specified in the security +session if the security session supports the definition of the direction. + +Multiple flows can be configured to use the same security session. For +example if the security session specifies an egress IPsec SA, then multiple +flows can be specified to that SA. In the case of an ingress IPsec SA then +it is only valid to have a single flow to map to that security session. + +.. code-block:: console + + Configuration Path + | + +--------|--------+ + | Add/Remove | + | IPsec SA | <------ Build security flow action of + | | | ipsec transform + |--------|--------| + | + +--------V--------+ + | Flow API | + +--------|--------+ + | + +--------V--------+ + | | + | NIC PMD | <------ Add/Remove SA to/from hw context + | | + +--------|--------+ + | + +--------|--------+ + | HW ACCELERATED | + | NIC | + | | + +--------|--------+ + +* Add/Delete SA flow: + To add a new inline SA construct a rte_flow_item for Ethernet + IP + ESP + using the SA selectors and the ``rte_crypto_ipsec_xform`` as the ``rte_flow_action``. + Note that any rte_flow_items may be empty, which means it is not checked. + +.. code-block:: console + + In its most basic form, IPsec flow specification is as follows: + +-------+ +----------+ +--------+ +-----+ + | Eth | -> | IP4/6 | -> | ESP | -> | END | + +-------+ +----------+ +--------+ +-----+ + + However, the API can represent, IPsec crypto offload with any encapsulation: + +-------+ +--------+ +-----+ + | Eth | -> ... -> | ESP | -> | END | + +-------+ +--------+ +-----+ -- 2.9.3