Re: [dpdk-dev] [PATCH v2] ring: guarantee ordering of cons/prod loading when doing

[Jerin Jacob <jerin.jacob@caviumnetworks.com>]

-----Original Message-----
> Date: Thu,  2 Nov 2017 08:43:30 +0000
> From: Jia He <hejianet@gmail.com>
> To: jerin.jacob@caviumnetworks.com, dev@dpdk.org, olivier.matz@6wind.com
> Cc: konstantin.ananyev@intel.com, bruce.richardson@intel.com,
>  jianbo.liu@arm.com, hemant.agrawal@nxp.com, Jia He <hejianet@gmail.com>,
>  jie2.liu@hxt-semitech.com, bing.zhao@hxt-semitech.com,
>  jia.he@hxt-semitech.com
> Subject: [PATCH v2] ring: guarantee ordering of cons/prod loading when doing
> X-Mailer: git-send-email 2.7.4
> 
> We watched a rte panic of mbuf_autotest in our qualcomm arm64 server.
> As for the possible race condition, please refer to [1].

Hi Jia,

In addition to Konstantin comments. Please find below some review
comments.
> 
> Furthermore, there are 2 options as suggested by Jerin:
> 1. use rte_smp_rmb
> 2. use load_acquire/store_release(refer to [2]).
> CONFIG_RTE_ATOMIC_ACQUIRE_RELEASE_BARRIER_PREFER is provided, and by

I think, The better name would be CONFIG_RTE_RING_USE_C11_MEM_MODEL
or something like that.

> default it is n;
> 
> ---
> Changelog:
> V2: let users choose whether using load_acquire/store_release
> V1: rte_smp_rmb() between 2 loads
> 
> Signed-off-by: Jia He <hejianet@gmail.com>
> Signed-off-by: jie2.liu@hxt-semitech.com
> Signed-off-by: bing.zhao@hxt-semitech.com
> Signed-off-by: jia.he@hxt-semitech.com
> Suggested-by: jerin.jacob@caviumnetworks.com
> ---
>  lib/librte_ring/Makefile           |  4 +++-
>  lib/librte_ring/rte_ring.h         | 38 ++++++++++++++++++++++++------
>  lib/librte_ring/rte_ring_arm64.h   | 48 ++++++++++++++++++++++++++++++++++++++
>  lib/librte_ring/rte_ring_generic.h | 45 +++++++++++++++++++++++++++++++++++
>  4 files changed, 127 insertions(+), 8 deletions(-)
>  create mode 100644 lib/librte_ring/rte_ring_arm64.h
>  create mode 100644 lib/librte_ring/rte_ring_generic.h
> 
> diff --git a/lib/librte_ring/Makefile b/lib/librte_ring/Makefile
> index e34d9d9..fa57a86 100644
> --- a/lib/librte_ring/Makefile
> +++ b/lib/librte_ring/Makefile
> @@ -45,6 +45,8 @@ LIBABIVER := 1
>  SRCS-$(CONFIG_RTE_LIBRTE_RING) := rte_ring.c
>  
>  # install includes
> -SYMLINK-$(CONFIG_RTE_LIBRTE_RING)-include := rte_ring.h
> +SYMLINK-$(CONFIG_RTE_LIBRTE_RING)-include := rte_ring.h \
> +					rte_ring_arm64.h \

It is really not specific to arm64. We could rename it to rte_ring_c11_mem.h or
something like that to reflect the implementation based on c11 memory
model.


> +					rte_ring_generic.h
>  
>  include $(RTE_SDK)/mk/rte.lib.mk
> diff --git a/lib/librte_ring/rte_ring.h b/lib/librte_ring/rte_ring.h
> index 5e9b3b7..943b1f9 100644
> --- a/lib/librte_ring/rte_ring.h
> +++ b/lib/librte_ring/rte_ring.h
> @@ -103,6 +103,18 @@ extern "C" {
>  #include <rte_memzone.h>
>  #include <rte_pause.h>
>  
> +/* In those strong memory models (e.g. x86), there is no need to add rmb()
> + * between load and load.
> + * In those weak models(powerpc/arm), there are 2 choices for the users
> + * 1.use rmb() memory barrier
> + * 2.use one-direcion load_acquire/store_release barrier
> + * It depends on performance test results. */
> +#ifdef RTE_ARCH_ARM64

s/RTE_ARCH_ARM64/RTE_RING_USE_C11_MEM_MODEL and update the generic arm64 config.
By that way it can used by another architecture like ppc if they choose to do so.


> +#include "rte_ring_arm64.h"
> +#else
> +#include "rte_ring_generic.h"
> +#endif
> +
>  #define RTE_TAILQ_RING_NAME "RTE_RING"
>  
>  enum rte_ring_queue_behavior {
> @@ -368,7 +380,7 @@ update_tail(struct rte_ring_headtail *ht, uint32_t old_val, uint32_t new_val,
>  		while (unlikely(ht->tail != old_val))
>  			rte_pause();
>  
> -	ht->tail = new_val;
> +	arch_rte_atomic_store(&ht->tail, new_val, __ATOMIC_RELEASE);
>  }
>  
>  /**
> @@ -408,7 +420,8 @@ __rte_ring_move_prod_head(struct rte_ring *r, int is_sp,
>  		/* Reset n to the initial burst count */
>  		n = max;
>  
> -		*old_head = r->prod.head;
> +		*old_head = arch_rte_atomic_load(&r->prod.head,
> +						__ATOMIC_ACQUIRE);

Same as Konstantin comments, i.e move to this function to c11 memory model 
header file

>  		const uint32_t cons_tail = r->cons.tail;
>  		/*
>  		 *  The subtraction is done between two unsigned 32bits value
> @@ -430,8 +443,10 @@ __rte_ring_move_prod_head(struct rte_ring *r, int is_sp,
>  		if (is_sp)
>  			r->prod.head = *new_head, success = 1;
>  		else
> -			success = rte_atomic32_cmpset(&r->prod.head,
> -					*old_head, *new_head);
> +			success = arch_rte_atomic32_cmpset(&r->prod.head,
> +					old_head, *new_head,
> +					0, __ATOMIC_ACQUIRE,
> +					__ATOMIC_RELAXED);
>  	} while (unlikely(success == 0));
>  	return n;
>  }
> @@ -470,7 +485,10 @@ __rte_ring_do_enqueue(struct rte_ring *r, void * const *obj_table,
>  		goto end;
>  
>  	ENQUEUE_PTRS(r, &r[1], prod_head, obj_table, n, void *);
> +
> +#ifndef RTE_ATOMIC_ACQUIRE_RELEASE_BARRIER_PREFER

This #define will be removed if the function moves.

>  	rte_smp_wmb();
> +#endif
>  
>  	update_tail(&r->prod, prod_head, prod_next, is_sp);
>  end:
> @@ -516,7 +534,8 @@ __rte_ring_move_cons_head(struct rte_ring *r, int is_sc,
>  		/* Restore n as it may change every loop */
>  		n = max;
>  
> -		*old_head = r->cons.head;
> +		*old_head = arch_rte_atomic_load(&r->cons.head,
> +						__ATOMIC_ACQUIRE);
>  		const uint32_t prod_tail = r->prod.tail;
>  		/* The subtraction is done between two unsigned 32bits value
>  		 * (the result is always modulo 32 bits even if we have
> @@ -535,8 +554,10 @@ __rte_ring_move_cons_head(struct rte_ring *r, int is_sc,
>  		if (is_sc)
>  			r->cons.head = *new_head, success = 1;
>  		else
> -			success = rte_atomic32_cmpset(&r->cons.head, *old_head,
> -					*new_head);
> +			success = arch_rte_atomic32_cmpset(&r->cons.head,
> +					old_head, *new_head,
> +					0, __ATOMIC_ACQUIRE,
> +					__ATOMIC_RELAXED);
>  	} while (unlikely(success == 0));
>  	return n;
>  }
> @@ -575,7 +596,10 @@ __rte_ring_do_dequeue(struct rte_ring *r, void **obj_table,
>  		goto end;
>  
>  	DEQUEUE_PTRS(r, &r[1], cons_head, obj_table, n, void *);
> +
> +#ifndef RTE_ATOMIC_ACQUIRE_RELEASE_BARRIER_PREFER

This #define will be removed if the function moves.

>  	rte_smp_rmb();
> +#endif