From: Stephen Hemminger <stephen@networkplumber.org>
To: Matan Azrad <matan@mellanox.com>
Cc: Ferruh Yigit <ferruh.yigit@intel.com>,
Thomas Monjalon <thomas@monjalon.net>,
dev@dpdk.org, Adrien Mazarguil <adrien.mazarguil@6wind.com>
Subject: Re: [dpdk-dev] [PATCH v3 5/8] net/vdev_netvsc: implement core functionality
Date: Tue, 9 Jan 2018 10:49:16 -0800 [thread overview]
Message-ID: <20180109104916.5919eebe@xeon-e3> (raw)
In-Reply-To: <1515509253-17834-6-git-send-email-matan@mellanox.com>
On Tue, 9 Jan 2018 14:47:30 +0000
Matan Azrad <matan@mellanox.com> wrote:
> As described in more details in the attached documentation (see patch
> contents), this virtual device driver manages NetVSC interfaces in virtual
> machines hosted by Hyper-V/Azure platforms.
>
> This driver does not manage traffic nor Ethernet devices directly; it acts
> as a thin configuration layer that automatically instantiates and controls
> fail-safe PMD instances combining tap and PCI sub-devices, so that each
> NetVSC interface is exposed as a single consolidated port to DPDK
> applications.
>
> PCI sub-devices being hot-pluggable (e.g. during VM migration),
> applications automatically benefit from increased throughput when present
> and automatic fallback on NetVSC otherwise without interruption thanks to
> fail-safe's hot-plug handling.
>
> Once initialized, the sole job of the vdev_netvsc driver is to regularly
> scan for PCI devices to associate with NetVSC interfaces and feed their
> addresses to corresponding fail-safe instances.
>
> Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
> Signed-off-by: Matan Azrad <matan@mellanox.com>
There is also the issue of how rescind is handled, but that may be more complex
than you want to deal with now. Host may rescind PCI devices for other reasons
than migration. For example, if host needs to do live upgrade of PF device driver
on host (or firmware); then it will rescind VF device from all guests and then
restore it after upgrade.
> diff --git a/drivers/net/vdev_netvsc/Makefile b/drivers/net/vdev_netvsc/Makefile
> index 2fb059d..f2b2ac5 100644
> --- a/drivers/net/vdev_netvsc/Makefile
> +++ b/drivers/net/vdev_netvsc/Makefile
> @@ -13,6 +13,9 @@ EXPORT_MAP := rte_pmd_vdev_netvsc_version.map
> CFLAGS += -O3
> CFLAGS += -g
> CFLAGS += -std=c11 -pedantic -Wall -Wextra
> +CFLAGS += -D_XOPEN_SOURCE=600
> +CFLAGS += -D_BSD_SOURCE
> +CFLAGS += -D_DEFAULT_SOURCE
These are kind of a nuisance, can't it just use same CFLAGS as other code?
> # Source files.
> SRCS-$(CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD) += vdev_netvsc.c
> diff --git a/drivers/net/vdev_netvsc/vdev_netvsc.c b/drivers/net/vdev_netvsc/vdev_netvsc.c
> index e895b32..3d8895b 100644
> --- a/drivers/net/vdev_netvsc/vdev_netvsc.c
> +++ b/drivers/net/vdev_netvsc/vdev_netvsc.c
> @@ -3,17 +3,41 @@
> * Copyright 2017 Mellanox Technologies, Ltd.
>
> #define VDEV_NETVSC_DRIVER net_vdev_netvsc
> #define VDEV_NETVSC_ARG_IFACE "iface"
> #define VDEV_NETVSC_ARG_MAC "mac"
> +#define VDEV_NETVSC_PROBE_MS 1000
> +
> +#define NETVSC_CLASS_ID "{f8615163-df3e-46c5-913f-f2d2f965ed0e}"
>
> #define DRV_LOG(level, ...) \
> rte_log(RTE_LOG_ ## level, \
> @@ -25,12 +49,490 @@
> /** Driver-specific log messages type. */
> static int vdev_netvsc_logtype;
>
> +/** Context structure for a vdev_netvsc instance. */
> +struct vdev_netvsc_ctx {
> + LIST_ENTRY(vdev_netvsc_ctx) entry; /**< Next entry in list. */
> + unsigned int id; /**< ID used to generate unique names. */
> + char name[64]; /**< Unique name for vdev_netvsc instance. */
> + char devname[64]; /**< Fail-safe PMD instance name. */
> + char devargs[256]; /**< Fail-safe PMD instance device arguments. */
> + char if_name[IF_NAMESIZE]; /**< NetVSC netdevice name. */
> + unsigned int if_index; /**< NetVSC netdevice index. */
> + struct ether_addr if_addr; /**< NetVSC MAC address. */
> + int pipe[2]; /**< Communication pipe with fail-safe instance. */
> + char yield[256]; /**< Current device string used with fail-safe. */
> +};
Please align comments.
> +/** Context list is common to all driver instances. */
> +static LIST_HEAD(, vdev_netvsc_ctx) vdev_netvsc_ctx_list =
> + LIST_HEAD_INITIALIZER(vdev_netvsc_ctx_list);
> +
> +/** Number of entries in context list. */
> +static unsigned int vdev_netvsc_ctx_count;
> +
> /** Number of driver instances relying on context list. */
> static unsigned int vdev_netvsc_ctx_inst;
>
> /**
> + * Destroy a vdev_netvsc context instance.
> + *
> + * @param ctx
> + * Context to destroy.
> + */
> +static void
> +vdev_netvsc_ctx_destroy(struct vdev_netvsc_ctx *ctx)
> +{
> + if (ctx->pipe[0] != -1)
> + close(ctx->pipe[0]);
> + if (ctx->pipe[1] != -1)
> + close(ctx->pipe[1]);
> + free(ctx);
> +}
> +
> +/**
> + * Iterate over system network interfaces.
> + *
> + * This function runs a given callback function for each netdevice found on
> + * the system.
> + *
> + * @param func
> + * Callback function pointer. List traversal is aborted when this function
> + * returns a nonzero value.
> + * @param ...
> + * Variable parameter list passed as @p va_list to @p func.
> + *
> + * @return
> + * 0 when the entire list is traversed successfully, a negative error code
> + * in case or failure, or the nonzero value returned by @p func when list
> + * traversal is aborted.
> + */
> +static int
> +vdev_netvsc_foreach_iface(int (*func)(const struct if_nameindex *iface,
> + const struct ether_addr *eth_addr,
> + va_list ap), ...)
> +{
> + struct if_nameindex *iface = if_nameindex();
> + int s = socket(PF_INET, SOCK_DGRAM, IPPROTO_IP);
> + unsigned int i;
> + int ret = 0;
> +
> + if (!iface) {
> + ret = -ENOBUFS;
> + DRV_LOG(ERR, "cannot retrieve system network interfaces");
> + goto error;
> + }
> + if (s == -1) {
> + ret = -errno;
> + DRV_LOG(ERR, "cannot open socket: %s", rte_strerror(errno));
> + goto error;
> + }
> + for (i = 0; iface[i].if_name; ++i) {
> + struct ifreq req;
> + struct ether_addr eth_addr;
> + va_list ap;
> +
> + strncpy(req.ifr_name, iface[i].if_name, sizeof(req.ifr_name));
> + if (ioctl(s, SIOCGIFHWADDR, &req) == -1) {
> + DRV_LOG(WARNING, "cannot retrieve information about"
> + " interface \"%s\": %s",
> + req.ifr_name, rte_strerror(errno));
> + continue;
> + }
Skip non-ethernet interfaces where addr length != 6
> + memcpy(eth_addr.addr_bytes, req.ifr_hwaddr.sa_data,
> + RTE_DIM(eth_addr.addr_bytes));
> + va_start(ap, func);
> + ret = func(&iface[i], ð_addr, ap);
> + va_end(ap);
> + if (ret)
> + break;
> + }
> +error:
> + if (s != -1)
> + close(s);
> + if (iface)
> + if_freenameindex(iface);
> + return ret;
> +}
> +
> +/**
> + * Determine if a network interface is NetVSC.
> + *
> + * @param[in] iface
> + * Pointer to netdevice description structure (name and index).
> + *
> + * @return
> + * A nonzero value when interface is detected as NetVSC. In case of error,
> + * rte_errno is updated and 0 returned.
> + */
> +static int
> +vdev_netvsc_iface_is_netvsc(const struct if_nameindex *iface)
> +{
> + static const char temp[] = "/sys/class/net/%s/device/class_id";
> + char path[sizeof(temp) + IF_NAMESIZE];
> + FILE *f;
> + int ret;
> + int len = 0;
> +
> + ret = snprintf(path, sizeof(path), temp, iface->if_name);
> + if (ret == -1 || (size_t)ret >= sizeof(path)) {
> + rte_errno = ENOBUFS;
> + return 0;
> + }
> + f = fopen(path, "r");
> + if (!f) {
> + rte_errno = errno;
> + return 0;
> + }
> + ret = fscanf(f, NETVSC_CLASS_ID "%n", &len);
This is different way to compare uuid, maybe use fgets() and uuid_compare?
> + if (ret == EOF)
> + rte_errno = errno;
> + ret = len == (int)strlen(NETVSC_CLASS_ID);
> + fclose(f);
> + return ret;
> +}
> +
> +/**
> + * Retrieve network interface data from sysfs symbolic link.
> + *
> + * @param[out] buf
> + * Output data buffer.
> + * @param size
> + * Output buffer size.
> + * @param[in] if_name
> + * Netdevice name.
> + * @param[in] relpath
> + * Symbolic link path relative to netdevice sysfs entry.
> + *
> + * @return
> + * 0 on success, a negative error code otherwise.
> + */
> +static int
> +vdev_netvsc_sysfs_readlink(char *buf, size_t size, const char *if_name,
> + const char *relpath)
> +{
> + int ret;
> +
> + ret = snprintf(buf, size, "/sys/class/net/%s/%s", if_name, relpath);
> + if (ret == -1 || (size_t)ret >= size)
> + return -ENOBUFS;
> + ret = readlink(buf, buf, size);
> + if (ret == -1)
> + return -errno;
> + if ((size_t)ret >= size - 1)
> + return -ENOBUFS;
> + buf[ret] = '\0';
> + return 0;
> +}
You might find it easier to look at directory.
/sys/bus/vmbus/drivers/hv_netvsc/
> +
> +/**
> + * Probe a network interface to associate with vdev_netvsc context.
> + *
> + * This function determines if the network device matches the properties of
> + * the NetVSC interface associated with the vdev_netvsc context and
> + * communicates its bus address to the fail-safe PMD instance if so.
> + *
> + * It is normally used with vdev_netvsc_foreach_iface().
> + *
> + * @param[in] iface
> + * Pointer to netdevice description structure (name and index).
> + * @param[in] eth_addr
> + * MAC address associated with @p iface.
> + * @param ap
> + * Variable arguments list comprising:
> + *
> + * - struct vdev_netvsc_ctx *ctx:
> + * Context to associate network interface with.
> + *
> + * @return
> + * A nonzero value when interface matches, 0 otherwise or in case of
> + * error.
> + */
> +static int
> +vdev_netvsc_device_probe(const struct if_nameindex *iface,
> + const struct ether_addr *eth_addr,
> + va_list ap)
> +{
> + struct vdev_netvsc_ctx *ctx = va_arg(ap, struct vdev_netvsc_ctx *);
> + char buf[RTE_MAX(sizeof(ctx->yield), 256u)];
> + const char *addr;
> + size_t len;
> + int ret;
> +
> + /* Skip non-matching or unwanted NetVSC interfaces. */
> + if (ctx->if_index == iface->if_index) {
> + if (!strcmp(ctx->if_name, iface->if_name))
> + return 0;
> + DRV_LOG(DEBUG,
> + "NetVSC interface \"%s\" (index %u) renamed \"%s\"",
> + ctx->if_name, ctx->if_index, iface->if_name);
> + strncpy(ctx->if_name, iface->if_name, sizeof(ctx->if_name));
> + return 0;
> + }
> + if (vdev_netvsc_iface_is_netvsc(iface))
> + return 0;
> + if (!is_same_ether_addr(eth_addr, &ctx->if_addr))
> + return 0;
> + /* Look for associated PCI device. */
> + ret = vdev_netvsc_sysfs_readlink(buf, sizeof(buf), iface->if_name,
> + "device/subsystem");
> + if (ret)
> + return 0;
> + addr = strrchr(buf, '/');
> + addr = addr ? addr + 1 : buf;
> + if (strcmp(addr, "pci"))
> + return 0;
> + ret = vdev_netvsc_sysfs_readlink(buf, sizeof(buf), iface->if_name,
> + "device");
> + if (ret)
> + return 0;
> + addr = strrchr(buf, '/');
> + addr = addr ? addr + 1 : buf;
> + len = strlen(addr);
> + if (!len)
> + return 0;
> + /* Send PCI device argument to fail-safe PMD instance. */
> + if (strcmp(addr, ctx->yield))
> + DRV_LOG(DEBUG, "associating PCI device \"%s\" with NetVSC"
> + " interface \"%s\" (index %u)", addr, ctx->if_name,
> + ctx->if_index);
> + memmove(buf, addr, len + 1);
> + addr = buf;
> + buf[len] = '\n';
> + ret = write(ctx->pipe[1], addr, len + 1);
> + buf[len] = '\0';
> + if (ret == -1) {
> + if (errno == EINTR || errno == EAGAIN)
> + return 1;
> + DRV_LOG(WARNING, "cannot associate PCI device name \"%s\" with"
> + " interface \"%s\": %s", addr, ctx->if_name,
> + rte_strerror(errno));
> + return 1;
> + }
> + if ((size_t)ret != len + 1) {
> + /*
> + * Attempt to override previous partial write, no need to
> + * recover if that fails.
> + */
> + ret = write(ctx->pipe[1], "\n", 1);
> + (void)ret;
> + return 1;
> + }
> + fsync(ctx->pipe[1]);
> + memcpy(ctx->yield, addr, len + 1);
> + return 1;
> +}
> +
> +/**
> + * Alarm callback that regularly probes system network interfaces.
> + *
> + * This callback runs at a frequency determined by VDEV_NETVSC_PROBE_MS as
> + * long as an vdev_netvsc context instance exists.
> + *
> + * @param arg
> + * Ignored.
> + */
> +static void
> +vdev_netvsc_alarm(__rte_unused void *arg)
> +{
> + struct vdev_netvsc_ctx *ctx;
> + int ret;
> +
> + LIST_FOREACH(ctx, &vdev_netvsc_ctx_list, entry) {
> + ret = vdev_netvsc_foreach_iface(vdev_netvsc_device_probe, ctx);
> + if (ret)
> + break;
> + }
> + if (!vdev_netvsc_ctx_count)
> + return;
> + ret = rte_eal_alarm_set(VDEV_NETVSC_PROBE_MS * 1000,
> + vdev_netvsc_alarm, NULL);
> + if (ret < 0) {
> + DRV_LOG(ERR, "unable to reschedule alarm callback: %s",
> + rte_strerror(-ret));
> + }
> +}
Why not use netlink uevent?
> +/**
> + * Probe a NetVSC interface to generate a vdev_netvsc context from.
> + *
> + * This function instantiates vdev_netvsc contexts either for all NetVSC
> + * devices found on the system or only a subset provided as device
> + * arguments.
> + *
> + * It is normally used with vdev_netvsc_foreach_iface().
> + *
> + * @param[in] iface
> + * Pointer to netdevice description structure (name and index).
> + * @param[in] eth_addr
> + * MAC address associated with @p iface.
> + * @param ap
> + * Variable arguments list comprising:
> + *
> + * - const char *name:
> + * Name associated with current driver instance.
> + *
> + * - struct rte_kvargs *kvargs:
> + * Device arguments provided to current driver instance.
> + *
> + * - unsigned int specified:
> + * Number of specific netdevices provided as device arguments.
> + *
> + * - unsigned int *matched:
> + * The number of specified netdevices matched by this function.
> + *
> + * @return
> + * A nonzero value when interface matches, 0 otherwise or in case of
> + * error.
> + */
> +static int
> +vdev_netvsc_netvsc_probe(const struct if_nameindex *iface,
> + const struct ether_addr *eth_addr,
> + va_list ap)
> +{
> + const char *name = va_arg(ap, const char *);
> + struct rte_kvargs *kvargs = va_arg(ap, struct rte_kvargs *);
> + unsigned int specified = va_arg(ap, unsigned int);
> + unsigned int *matched = va_arg(ap, unsigned int *);
> + unsigned int i;
> + struct vdev_netvsc_ctx *ctx;
> + int ret;
> +
> + /* Probe all interfaces when none are specified. */
> + if (specified) {
> + for (i = 0; i != kvargs->count; ++i) {
> + const struct rte_kvargs_pair *pair = &kvargs->pairs[i];
> +
> + if (!strcmp(pair->key, VDEV_NETVSC_ARG_IFACE)) {
> + if (!strcmp(pair->value, iface->if_name))
> + break;
> + } else if (!strcmp(pair->key, VDEV_NETVSC_ARG_MAC)) {
> + struct ether_addr tmp;
> +
> + if (sscanf(pair->value,
> + "%" SCNx8 ":%" SCNx8 ":%" SCNx8 ":"
> + "%" SCNx8 ":%" SCNx8 ":%" SCNx8,
> + &tmp.addr_bytes[0],
> + &tmp.addr_bytes[1],
> + &tmp.addr_bytes[2],
> + &tmp.addr_bytes[3],
> + &tmp.addr_bytes[4],
> + &tmp.addr_bytes[5]) != 6) {
> + DRV_LOG(ERR,
> + "invalid MAC address format"
> + " \"%s\"",
> + pair->value);
> + return -EINVAL;
> + }
> + if (is_same_ether_addr(eth_addr, &tmp))
> + break;
> + }
> + }
> + if (i == kvargs->count)
> + return 0;
> + ++(*matched);
> + }
> + /* Weed out interfaces already handled. */
> + LIST_FOREACH(ctx, &vdev_netvsc_ctx_list, entry)
> + if (ctx->if_index == iface->if_index)
> + break;
> + if (ctx) {
> + if (!specified)
> + return 0;
> + DRV_LOG(WARNING,
> + "interface \"%s\" (index %u) is already handled,"
> + " skipping",
> + iface->if_name, iface->if_index);
> + return 0;
> + }
> + if (!vdev_netvsc_iface_is_netvsc(iface)) {
> + if (!specified)
> + return 0;
> + DRV_LOG(WARNING,
> + "interface \"%s\" (index %u) is not NetVSC,"
> + " skipping",
> + iface->if_name, iface->if_index);
> + return 0;
> + }
> + /* Create interface context. */
> + ctx = calloc(1, sizeof(*ctx));
> + if (!ctx) {
> + ret = -errno;
> + DRV_LOG(ERR, "cannot allocate context for interface \"%s\": %s",
> + iface->if_name, rte_strerror(errno));
> + goto error;
> + }
> + ctx->id = vdev_netvsc_ctx_count;
> + strncpy(ctx->if_name, iface->if_name, sizeof(ctx->if_name));
> + ctx->if_index = iface->if_index;
> + ctx->if_addr = *eth_addr;
> + ctx->pipe[0] = -1;
> + ctx->pipe[1] = -1;
> + ctx->yield[0] = '\0';
> + if (pipe(ctx->pipe) == -1) {
> + ret = -errno;
> + DRV_LOG(ERR,
> + "cannot allocate control pipe for interface \"%s\": %s",
> + ctx->if_name, rte_strerror(errno));
> + goto error;
> + }
> + for (i = 0; i != RTE_DIM(ctx->pipe); ++i) {
> + int flf = fcntl(ctx->pipe[i], F_GETFL);
> +
> + if (flf != -1 &&
> + fcntl(ctx->pipe[i], F_SETFL, flf | O_NONBLOCK) != -1)
> + continue;
> + ret = -errno;
> + DRV_LOG(ERR, "cannot toggle non-blocking flag on control file"
> + " descriptor #%u (%d): %s", i, ctx->pipe[i],
> + rte_strerror(errno));
> + goto error;
> + }
> + /* Generate virtual device name and arguments. */
> + i = 0;
> + ret = snprintf(ctx->name, sizeof(ctx->name), "%s_id%u",
> + name, ctx->id);
> + if (ret == -1 || (size_t)ret >= sizeof(ctx->name))
> + ++i;
> + ret = snprintf(ctx->devname, sizeof(ctx->devname), "net_failsafe_%s",
> + ctx->name);
> + if (ret == -1 || (size_t)ret >= sizeof(ctx->devname))
> + ++i;
> + ret = snprintf(ctx->devargs, sizeof(ctx->devargs),
> + "fd(%d),dev(net_tap_%s,remote=%s)",
> + ctx->pipe[0], ctx->name, ctx->if_name);
> + if (ret == -1 || (size_t)ret >= sizeof(ctx->devargs))
> + ++i;
> + if (i) {
> + ret = -ENOBUFS;
> + DRV_LOG(ERR, "generated virtual device name or argument list"
> + " too long for interface \"%s\"", ctx->if_name);
> + goto error;
> + }
> + /* Request virtual device generation. */
> + DRV_LOG(DEBUG, "generating virtual device \"%s\" with arguments \"%s\"",
> + ctx->devname, ctx->devargs);
> + vdev_netvsc_foreach_iface(vdev_netvsc_device_probe, ctx);
> + ret = rte_eal_hotplug_add("vdev", ctx->devname, ctx->devargs);
> + if (ret)
> + goto error;
> + LIST_INSERT_HEAD(&vdev_netvsc_ctx_list, ctx, entry);
> + ++vdev_netvsc_ctx_count;
> + DRV_LOG(DEBUG, "added NetVSC interface \"%s\" to context list",
> + ctx->if_name);
> + return 0;
> +error:
> + if (ctx)
> + vdev_netvsc_ctx_destroy(ctx);
> + return ret;
> +}
> +
> +/**
> * Probe NetVSC interfaces.
> *
> + * This function probes system netdevices according to the specified device
> + * arguments and starts a periodic alarm callback to notify the resulting
> + * fail-safe PMD instances of their sub-devices whereabouts.
> + *
> * @param dev
> * Virtual device context for driver instance.
> *
> @@ -49,12 +551,40 @@
> const char *args = rte_vdev_device_args(dev);
> struct rte_kvargs *kvargs = rte_kvargs_parse(args ? args : "",
> vdev_netvsc_arg);
> + unsigned int specified = 0;
> + unsigned int matched = 0;
> + unsigned int i;
> + int ret;
>
> DRV_LOG(DEBUG, "invoked as \"%s\", using arguments \"%s\"", name, args);
> if (!kvargs) {
> DRV_LOG(ERR, "cannot parse arguments list");
> goto error;
> }
> + for (i = 0; i != kvargs->count; ++i) {
> + const struct rte_kvargs_pair *pair = &kvargs->pairs[i];
> +
> + if (!strcmp(pair->key, VDEV_NETVSC_ARG_IFACE) ||
> + !strcmp(pair->key, VDEV_NETVSC_ARG_MAC))
> + ++specified;
> + }
> + rte_eal_alarm_cancel(vdev_netvsc_alarm, NULL);
> + /* Gather interfaces. */
> + ret = vdev_netvsc_foreach_iface(vdev_netvsc_netvsc_probe, name, kvargs,
> + specified, &matched);
> + if (ret < 0)
> + goto error;
> + if (matched < specified)
> + DRV_LOG(WARNING,
> + "some of the specified parameters did not match"
> + " recognized network interfaces");
> + ret = rte_eal_alarm_set(VDEV_NETVSC_PROBE_MS * 1000,
> + vdev_netvsc_alarm, NULL);
> + if (ret < 0) {
> + DRV_LOG(ERR, "unable to schedule alarm callback: %s",
> + rte_strerror(-ret));
> + goto error;
> + }
> error:
> if (kvargs)
> rte_kvargs_free(kvargs);
> @@ -65,6 +595,9 @@
> /**
> * Remove driver instance.
> *
> + * The alarm callback and underlying vdev_netvsc context instances are only
> + * destroyed after the last PMD instance is removed.
> + *
> * @param dev
> * Virtual device context for driver instance.
> *
> @@ -74,7 +607,16 @@
> static int
> vdev_netvsc_vdev_remove(__rte_unused struct rte_vdev_device *dev)
> {
> - --vdev_netvsc_ctx_inst;
> + if (--vdev_netvsc_ctx_inst)
> + return 0;
> + rte_eal_alarm_cancel(vdev_netvsc_alarm, NULL);
> + while (!LIST_EMPTY(&vdev_netvsc_ctx_list)) {
> + struct vdev_netvsc_ctx *ctx = LIST_FIRST(&vdev_netvsc_ctx_list);
> +
> + LIST_REMOVE(ctx, entry);
> + --vdev_netvsc_ctx_count;
> + vdev_netvsc_ctx_destroy(ctx);
> + }
> return 0;
> }
>
next prev parent reply other threads:[~2018-01-09 18:49 UTC|newest]
Thread overview: 112+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20171124160801.GU4062@6wind.com>
[not found] ` <20171124164812.GV4062@6wind.com>
2017-11-24 17:21 ` [dpdk-dev] [RFC] Introduce virtual PMD for Hyper-V/Azure platforms Adrien Mazarguil
2017-12-18 16:46 ` [dpdk-dev] [PATCH v1 0/3] " Adrien Mazarguil
2017-12-18 16:46 ` [dpdk-dev] [PATCH v1 1/3] net/hyperv: introduce MS Hyper-V platform driver Adrien Mazarguil
2017-12-18 18:28 ` Stephen Hemminger
2017-12-18 19:54 ` Thomas Monjalon
2017-12-18 21:17 ` Stephen Hemminger
2017-12-19 10:01 ` Adrien Mazarguil
2017-12-19 11:15 ` Thomas Monjalon
2017-12-19 13:13 ` Adrien Mazarguil
2017-12-18 16:46 ` [dpdk-dev] [PATCH v1 2/3] net/hyperv: implement core functionality Adrien Mazarguil
2017-12-18 17:04 ` Wiles, Keith
2017-12-18 17:59 ` Adrien Mazarguil
2017-12-18 18:43 ` Wiles, Keith
2017-12-19 8:25 ` Nelio Laranjeiro
2017-12-18 18:26 ` Stephen Hemminger
2017-12-18 20:21 ` Adrien Mazarguil
2017-12-18 21:03 ` Thomas Monjalon
2017-12-18 21:19 ` Stephen Hemminger
2017-12-18 18:34 ` Stephen Hemminger
2017-12-18 20:23 ` Adrien Mazarguil
2017-12-19 9:53 ` Bruce Richardson
2017-12-19 10:15 ` Adrien Mazarguil
2017-12-19 15:31 ` Stephen Hemminger
2017-12-18 23:59 ` Stephen Hemminger
2017-12-19 10:01 ` Adrien Mazarguil
2017-12-19 15:37 ` Stephen Hemminger
2017-12-19 1:54 ` Ferruh Yigit
2017-12-19 15:06 ` Adrien Mazarguil
2017-12-19 20:44 ` Ferruh Yigit
2017-12-20 14:13 ` Thomas Monjalon
2017-12-21 16:19 ` Adrien Mazarguil
2017-12-18 16:46 ` [dpdk-dev] [PATCH v1 3/3] net/hyperv: add "force" parameter Adrien Mazarguil
2017-12-18 18:23 ` [dpdk-dev] [PATCH v1 0/3] Introduce virtual PMD for Hyper-V/Azure platforms Stephen Hemminger
2017-12-18 20:13 ` Thomas Monjalon
2017-12-19 0:40 ` Stephen Hemminger
2017-12-18 20:21 ` Adrien Mazarguil
2017-12-22 18:01 ` [dpdk-dev] [PATCH v2 0/5] " Adrien Mazarguil
2017-12-22 18:01 ` [dpdk-dev] [PATCH v2 1/5] net/failsafe: fix invalid free Adrien Mazarguil
2017-12-22 18:01 ` [dpdk-dev] [PATCH v2 2/5] net/failsafe: add "fd" parameter Adrien Mazarguil
2017-12-22 18:01 ` [dpdk-dev] [PATCH v2 3/5] net/vdev_netvsc: introduce Hyper-V platform driver Adrien Mazarguil
2017-12-22 18:01 ` [dpdk-dev] [PATCH v2 4/5] net/vdev_netvsc: implement core functionality Adrien Mazarguil
2017-12-22 18:01 ` [dpdk-dev] [PATCH v2 5/5] net/vdev_netvsc: add "force" parameter Adrien Mazarguil
2017-12-23 2:06 ` [dpdk-dev] [PATCH v2 0/5] Introduce virtual PMD for Hyper-V/Azure platforms Stephen Hemminger
2017-12-23 14:28 ` Thomas Monjalon
2018-01-09 14:47 ` [dpdk-dev] [PATCH v3 0/8] Introduce virtual driver " Matan Azrad
2018-01-09 14:47 ` [dpdk-dev] [PATCH v3 1/8] net/failsafe: fix invalid free Matan Azrad
2018-01-16 10:24 ` Gaëtan Rivet
2018-01-09 14:47 ` [dpdk-dev] [PATCH v3 2/8] net/failsafe: add "fd" parameter Matan Azrad
2018-01-16 10:54 ` Gaëtan Rivet
2018-01-16 11:19 ` Gaëtan Rivet
2018-01-16 16:17 ` Matan Azrad
2018-01-09 14:47 ` [dpdk-dev] [PATCH v3 3/8] net/failsafe: support probed sub-devices getting Matan Azrad
2018-01-16 11:09 ` Gaëtan Rivet
2018-01-16 12:27 ` Matan Azrad
2018-01-16 14:40 ` Gaëtan Rivet
2018-01-16 16:15 ` Matan Azrad
2018-01-16 16:54 ` Gaëtan Rivet
2018-01-16 17:20 ` Matan Azrad
2018-01-16 22:31 ` Gaëtan Rivet
2018-01-17 8:40 ` Matan Azrad
2018-01-09 14:47 ` [dpdk-dev] [PATCH v3 4/8] net/vdev_netvsc: introduce Hyper-V platform driver Matan Azrad
2018-01-09 14:47 ` [dpdk-dev] [PATCH v3 5/8] net/vdev_netvsc: implement core functionality Matan Azrad
2018-01-09 18:49 ` Stephen Hemminger [this message]
2018-01-10 15:02 ` Matan Azrad
2018-01-17 16:51 ` Thomas Monjalon
2018-01-09 14:47 ` [dpdk-dev] [PATCH v3 6/8] net/vdev_netvsc: skip routed netvsc probing Matan Azrad
2018-01-09 18:51 ` Stephen Hemminger
2018-01-10 15:07 ` Matan Azrad
2018-01-10 16:43 ` Stephen Hemminger
2018-01-11 9:00 ` Matan Azrad
2018-01-17 16:59 ` Thomas Monjalon
2018-01-09 14:47 ` [dpdk-dev] [PATCH v3 7/8] net/vdev_netvsc: add "force" parameter Matan Azrad
2018-01-09 14:47 ` [dpdk-dev] [PATCH v3 8/8] net/vdev_netvsc: add automatic probing Matan Azrad
2018-01-18 8:43 ` [dpdk-dev] [PATCH v4 0/8] Introduce virtual driver for Hyper-V/Azure platforms Matan Azrad
2018-01-18 8:43 ` [dpdk-dev] [PATCH v4 1/8] net/failsafe: fix invalid free Matan Azrad
2018-01-18 8:43 ` [dpdk-dev] [PATCH v4 2/8] net/failsafe: add "fd" parameter Matan Azrad
2018-01-18 8:51 ` Gaëtan Rivet
2018-01-18 8:43 ` [dpdk-dev] [PATCH v4 3/8] net/failsafe: add probed etherdev capture Matan Azrad
2018-01-18 9:10 ` Gaëtan Rivet
2018-01-18 9:33 ` Matan Azrad
2018-01-18 8:43 ` [dpdk-dev] [PATCH v4 4/8] net/vdev_netvsc: introduce Hyper-V platform driver Matan Azrad
2018-01-18 8:43 ` [dpdk-dev] [PATCH v4 5/8] net/vdev_netvsc: implement core functionality Matan Azrad
2018-01-18 18:25 ` Stephen Hemminger
2018-01-18 18:28 ` Matan Azrad
2018-01-18 8:43 ` [dpdk-dev] [PATCH v4 6/8] net/vdev_netvsc: skip routed netvsc probing Matan Azrad
2018-01-18 18:26 ` Stephen Hemminger
2018-01-18 18:47 ` Thomas Monjalon
2018-01-18 8:43 ` [dpdk-dev] [PATCH v4 7/8] net/vdev_netvsc: add "force" parameter Matan Azrad
2018-01-18 18:27 ` Stephen Hemminger
2018-01-18 18:30 ` Matan Azrad
2018-01-18 8:43 ` [dpdk-dev] [PATCH v4 8/8] net/vdev_netvsc: add automatic probing Matan Azrad
2018-01-18 10:01 ` [dpdk-dev] [PATCH v5 0/8] Introduce virtual driver for Hyper-V/Azure platforms Matan Azrad
2018-01-18 10:01 ` [dpdk-dev] [PATCH v5 1/8] net/failsafe: fix invalid free Matan Azrad
2018-01-18 10:01 ` [dpdk-dev] [PATCH v5 2/8] net/failsafe: add "fd" parameter Matan Azrad
2018-01-18 10:01 ` [dpdk-dev] [PATCH v5 3/8] net/failsafe: add probed etherdev capture Matan Azrad
2018-01-18 10:08 ` Gaëtan Rivet
2018-01-18 10:01 ` [dpdk-dev] [PATCH v5 4/8] net/vdev_netvsc: introduce Hyper-V platform driver Matan Azrad
2018-01-18 10:01 ` [dpdk-dev] [PATCH v5 5/8] net/vdev_netvsc: implement core functionality Matan Azrad
2018-01-18 10:01 ` [dpdk-dev] [PATCH v5 6/8] net/vdev_netvsc: skip routed netvsc probing Matan Azrad
2018-01-18 10:01 ` [dpdk-dev] [PATCH v5 7/8] net/vdev_netvsc: add "force" parameter Matan Azrad
2018-01-18 10:01 ` [dpdk-dev] [PATCH v5 8/8] net/vdev_netvsc: add automatic probing Matan Azrad
2018-01-18 13:51 ` [dpdk-dev] [PATCH v6 0/8] Introduce virtual driver for Hyper-V/Azure platforms Matan Azrad
2018-01-18 13:51 ` [dpdk-dev] [PATCH v6 1/8] net/failsafe: fix invalid free Matan Azrad
2018-01-18 13:51 ` [dpdk-dev] [PATCH v6 2/8] net/failsafe: add "fd" parameter Matan Azrad
2018-01-18 13:51 ` [dpdk-dev] [PATCH v6 3/8] net/failsafe: add probed etherdev capture Matan Azrad
2018-01-18 22:34 ` Thomas Monjalon
2018-01-18 13:51 ` [dpdk-dev] [PATCH v6 4/8] net/vdev_netvsc: introduce Hyper-V platform driver Matan Azrad
2018-01-18 13:51 ` [dpdk-dev] [PATCH v6 5/8] net/vdev_netvsc: implement core functionality Matan Azrad
2018-01-18 13:51 ` [dpdk-dev] [PATCH v6 6/8] net/vdev_netvsc: skip routed netvsc probing Matan Azrad
2018-01-18 13:51 ` [dpdk-dev] [PATCH v6 7/8] net/vdev_netvsc: add "force" parameter Matan Azrad
2018-01-18 13:51 ` [dpdk-dev] [PATCH v6 8/8] net/vdev_netvsc: add automatic probing Matan Azrad
2018-01-20 1:15 ` [dpdk-dev] [PATCH v6 0/8] Introduce virtual driver for Hyper-V/Azure platforms Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180109104916.5919eebe@xeon-e3 \
--to=stephen@networkplumber.org \
--cc=adrien.mazarguil@6wind.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=matan@mellanox.com \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).