From: Stephen Hemminger <stephen@networkplumber.org>
To: dev@dpdk.org
Cc: Stephen Hemminger <stephen@networkplumber.org>,
Ferruh Yigit <ferruh.yigit@intel.com>
Subject: [dpdk-dev] [PATCH v7 08/15] net/ixgbe: use rte_eth_linkstatus functions
Date: Mon, 22 Jan 2018 15:54:51 -0800 [thread overview]
Message-ID: <20180122235458.28562-9-stephen@networkplumber.org> (raw)
In-Reply-To: <20180122235458.28562-1-stephen@networkplumber.org>
Use the new helper functions from eth_dev for
handling atomic link_info update.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
---
drivers/net/ixgbe/ixgbe_ethdev.c | 96 +++++++---------------------------------
1 file changed, 17 insertions(+), 79 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index 58217680c29c..7b74cbe92c0d 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -20,7 +20,6 @@
#include <rte_debug.h>
#include <rte_pci.h>
#include <rte_bus_pci.h>
-#include <rte_atomic.h>
#include <rte_branch_prediction.h>
#include <rte_memory.h>
#include <rte_eal.h>
@@ -787,58 +786,6 @@ static const struct rte_ixgbe_xstats_name_off rte_ixgbevf_stats_strings[] = {
#define IXGBEVF_NB_XSTATS (sizeof(rte_ixgbevf_stats_strings) / \
sizeof(rte_ixgbevf_stats_strings[0]))
-/**
- * Atomically reads the link status information from global
- * structure rte_eth_dev.
- *
- * @param dev
- * - Pointer to the structure rte_eth_dev to read from.
- * - Pointer to the buffer to be saved with the link status.
- *
- * @return
- * - On success, zero.
- * - On failure, negative value.
- */
-static inline int
-rte_ixgbe_dev_atomic_read_link_status(struct rte_eth_dev *dev,
- struct rte_eth_link *link)
-{
- struct rte_eth_link *dst = link;
- struct rte_eth_link *src = &(dev->data->dev_link);
-
- if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
- *(uint64_t *)src) == 0)
- return -1;
-
- return 0;
-}
-
-/**
- * Atomically writes the link status information into global
- * structure rte_eth_dev.
- *
- * @param dev
- * - Pointer to the structure rte_eth_dev to read from.
- * - Pointer to the buffer to be saved with the link status.
- *
- * @return
- * - On success, zero.
- * - On failure, negative value.
- */
-static inline int
-rte_ixgbe_dev_atomic_write_link_status(struct rte_eth_dev *dev,
- struct rte_eth_link *link)
-{
- struct rte_eth_link *dst = &(dev->data->dev_link);
- struct rte_eth_link *src = link;
-
- if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
- *(uint64_t *)src) == 0)
- return -1;
-
- return 0;
-}
-
/*
* This function is the same as ixgbe_is_sfp() in base/ixgbe.h.
*/
@@ -2758,7 +2705,7 @@ ixgbe_dev_stop(struct rte_eth_dev *dev)
/* Clear recorded link status */
memset(&link, 0, sizeof(link));
- rte_ixgbe_dev_atomic_write_link_status(dev, &link);
+ rte_eth_linkstatus_set(dev, &link);
if (!rte_intr_allow_others(intr_handle))
/* resume to the default handler */
@@ -3943,7 +3890,6 @@ ixgbe_dev_link_update_share(struct rte_eth_dev *dev,
int wait_to_complete, int vf)
{
struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
- struct rte_eth_link link, old;
ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN;
struct ixgbe_interrupt *intr =
IXGBE_DEV_PRIVATE_TO_INTR(dev->data->dev_private);
@@ -3952,13 +3898,11 @@ ixgbe_dev_link_update_share(struct rte_eth_dev *dev,
u32 speed = 0;
int wait = 1;
bool autoneg = false;
-
- link.link_status = ETH_LINK_DOWN;
- link.link_speed = 0;
- link.link_duplex = ETH_LINK_HALF_DUPLEX;
- link.link_autoneg = ETH_LINK_AUTONEG;
- memset(&old, 0, sizeof(old));
- rte_ixgbe_dev_atomic_read_link_status(dev, &old);
+ struct rte_eth_link link = {
+ .link_status = ETH_LINK_DOWN,
+ .link_duplex = ETH_LINK_HALF_DUPLEX,
+ .link_autoneg = ETH_LINK_AUTONEG,
+ };
hw->mac.get_link_status = true;
@@ -3982,19 +3926,17 @@ ixgbe_dev_link_update_share(struct rte_eth_dev *dev,
if (diag != 0) {
link.link_speed = ETH_SPEED_NUM_100M;
link.link_duplex = ETH_LINK_FULL_DUPLEX;
- rte_ixgbe_dev_atomic_write_link_status(dev, &link);
- if (link.link_status == old.link_status)
- return -1;
+ rte_eth_linkstatus_set(dev, &link);
+
return 0;
}
if (link_up == 0) {
- rte_ixgbe_dev_atomic_write_link_status(dev, &link);
intr->flags |= IXGBE_FLAG_NEED_LINK_CONFIG;
- if (link.link_status == old.link_status)
- return -1;
+ rte_eth_linkstatus_set(dev, &link);
return 0;
}
+
intr->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG;
link.link_status = ETH_LINK_UP;
link.link_duplex = ETH_LINK_FULL_DUPLEX;
@@ -4026,11 +3968,8 @@ ixgbe_dev_link_update_share(struct rte_eth_dev *dev,
link.link_speed = ETH_SPEED_NUM_10G;
break;
}
- rte_ixgbe_dev_atomic_write_link_status(dev, &link);
-
- if (link.link_status == old.link_status)
- return -1;
+ rte_eth_linkstatus_set(dev, &link);
return 0;
}
@@ -4230,8 +4169,8 @@ ixgbe_dev_link_status_print(struct rte_eth_dev *dev)
struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
struct rte_eth_link link;
- memset(&link, 0, sizeof(link));
- rte_ixgbe_dev_atomic_read_link_status(dev, &link);
+ rte_eth_linkstatus_get(dev, &link);
+
if (link.link_status) {
PMD_INIT_LOG(INFO, "Port %d: Link Up - speed %u Mbps - %s",
(int)(dev->data->port_id),
@@ -4266,7 +4205,6 @@ ixgbe_dev_interrupt_action(struct rte_eth_dev *dev,
struct ixgbe_interrupt *intr =
IXGBE_DEV_PRIVATE_TO_INTR(dev->data->dev_private);
int64_t timeout;
- struct rte_eth_link link;
struct ixgbe_hw *hw =
IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
@@ -4283,9 +4221,10 @@ ixgbe_dev_interrupt_action(struct rte_eth_dev *dev,
}
if (intr->flags & IXGBE_FLAG_NEED_LINK_UPDATE) {
+ struct rte_eth_link link;
+
/* get the link status before link update, for predicting later */
- memset(&link, 0, sizeof(link));
- rte_ixgbe_dev_atomic_read_link_status(dev, &link);
+ rte_eth_linkstatus_get(dev, &link);
ixgbe_dev_link_update(dev, 0);
@@ -6804,9 +6743,8 @@ ixgbe_start_timecounters(struct rte_eth_dev *dev)
uint32_t shift = 0;
/* Get current link speed. */
- memset(&link, 0, sizeof(link));
ixgbe_dev_link_update(dev, 1);
- rte_ixgbe_dev_atomic_read_link_status(dev, &link);
+ rte_eth_linkstatus_get(dev, &link);
switch (link.link_speed) {
case ETH_SPEED_NUM_100M:
--
2.15.1
next prev parent reply other threads:[~2018-01-22 23:55 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-22 23:54 [dpdk-dev] [PATCH v7 00/15] common linkstatus functions Stephen Hemminger
2018-01-22 23:54 ` [dpdk-dev] [PATCH v7 01/15] eal: introduce atomic exchange operation Stephen Hemminger
2018-01-22 23:54 ` [dpdk-dev] [PATCH v7 02/15] ethdev: add linkstatus get/set helper functions Stephen Hemminger
2018-01-23 0:07 ` [dpdk-dev] [PACH v7 02a] typo in i686 version of rte_atomic64_exchange Stephen Hemminger
2018-01-22 23:54 ` [dpdk-dev] [PATCH v7 03/15] net/virtio: use eth_linkstatus_set Stephen Hemminger
2018-01-22 23:54 ` [dpdk-dev] [PATCH v7 04/15] net/vmxnet3: use rte_eth_linkstatus_set Stephen Hemminger
2018-01-22 23:54 ` [dpdk-dev] [PATCH v7 05/15] net/dpaa2: " Stephen Hemminger
2018-01-22 23:54 ` [dpdk-dev] [PATCH v7 06/15] net/nfp: use rte_eth_linkstatus functions Stephen Hemminger
2018-01-22 23:54 ` [dpdk-dev] [PATCH v7 07/15] net/e1000: use rte_eth_linkstatus helpers Stephen Hemminger
2018-01-22 23:54 ` Stephen Hemminger [this message]
2018-01-23 12:27 ` [dpdk-dev] [PATCH v7 08/15] net/ixgbe: use rte_eth_linkstatus functions Neil Horman
2018-01-25 13:45 ` Ferruh Yigit
2018-01-22 23:54 ` [dpdk-dev] [PATCH v7 09/15] net/sfc: use new " Stephen Hemminger
2018-01-22 23:54 ` [dpdk-dev] [PATCH v7 10/15] net/i40e: use " Stephen Hemminger
2018-01-22 23:54 ` [dpdk-dev] [PATCH v7 11/15] net/liquidio: use rte_eth_linkstatus_set Stephen Hemminger
2018-01-22 23:54 ` [dpdk-dev] [PATCH v7 12/15] net/thunderx: " Stephen Hemminger
2018-01-22 23:54 ` [dpdk-dev] [PATCH v7 13/15] net/szedata: use _rte_eth_linkstatus_set Stephen Hemminger
2018-01-22 23:54 ` [dpdk-dev] [PATCH v7 14/15] net/octeontx: use rte_eth_linkstatus_set Stephen Hemminger
2018-01-22 23:54 ` [dpdk-dev] [PATCH v7 15/15] net/enic: " Stephen Hemminger
2018-01-25 13:51 ` [dpdk-dev] [PATCH v7 00/15] common linkstatus functions Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180122235458.28562-9-stephen@networkplumber.org \
--to=stephen@networkplumber.org \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).