From: Shahaf Shuler <shahafs@mellanox.com>
To: nelio.laranjeiro@6wind.com, adrien.mazarguil@6wind.com,
yskoh@mellanox.com
Cc: dev@dpdk.org, stable@dpdk.org
Subject: [dpdk-dev] [PATCH] net/mlx5: fix tunnel offloads cap query
Date: Sun, 25 Feb 2018 09:28:37 +0200 [thread overview]
Message-ID: <20180225072837.85663-1-shahafs@mellanox.com> (raw)
The query for the tunnel stateless offloads is wrongly implemented
because of:
1. It was using the device id to query for the offloads.
2. It was using a compilation flag for Verbs which no longer exits.
The main reason was lack of proper API from Verbs.
Fixing the query to use rdma-core API. The capability returned from
rdma-core refer to both Tx and Rx sides.
Eventhough there is a separate cap for GRE and VXLAN, implementation merge
them into a single flag in order to simplify the checks on the data
path.
Fixes: 43e9d9794cde ("net/mlx5: support upstream rdma-core")
Fixes: f5fde5205101 ("net/mlx5: add hardware checksum offload for tunnel packets")
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Xueming Li <xuemingl@mellanox.com>
---
drivers/net/mlx5/Makefile | 6 +++---
drivers/net/mlx5/mlx5.c | 39 +++++++++++++++------------------------
drivers/net/mlx5/mlx5.h | 4 ++--
drivers/net/mlx5/mlx5_rxq.c | 2 +-
4 files changed, 21 insertions(+), 30 deletions(-)
diff --git a/drivers/net/mlx5/Makefile b/drivers/net/mlx5/Makefile
index 3bc9736c9..afda4118f 100644
--- a/drivers/net/mlx5/Makefile
+++ b/drivers/net/mlx5/Makefile
@@ -125,9 +125,9 @@ mlx5_autoconf.h.new: FORCE
mlx5_autoconf.h.new: $(RTE_SDK)/buildtools/auto-config-h.sh
$Q $(RM) -f -- '$@'
$Q sh -- '$<' '$@' \
- HAVE_IBV_DEVICE_VXLAN_SUPPORT \
- infiniband/verbs.h \
- enum IBV_DEVICE_VXLAN_SUPPORT \
+ HAVE_IBV_DEVICE_TUNNEL_SUPPORT \
+ infiniband/mlx5dv.h \
+ enum MLX5DV_CONTEXT_MASK_TUNNEL_OFFLOADS \
$(AUTOCONF_OUTPUT)
$Q sh -- '$<' '$@' \
HAVE_IBV_WQ_FLAG_RX_END_PADDING \
diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
index 6c0985bd6..61cb93101 100644
--- a/drivers/net/mlx5/mlx5.c
+++ b/drivers/net/mlx5/mlx5.c
@@ -584,7 +584,7 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev)
unsigned int tunnel_en = 0;
int idx;
int i;
- struct mlx5dv_context attrs_out;
+ struct mlx5dv_context attrs_out = {0};
#ifdef HAVE_IBV_DEVICE_COUNTERS_SET_SUPPORT
struct ibv_counter_set_description cs_desc;
#endif
@@ -633,20 +633,6 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev)
PCI_DEVICE_ID_MELLANOX_CONNECTX5VF) ||
(pci_dev->id.device_id ==
PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF));
- switch (pci_dev->id.device_id) {
- case PCI_DEVICE_ID_MELLANOX_CONNECTX4:
- tunnel_en = 1;
- break;
- case PCI_DEVICE_ID_MELLANOX_CONNECTX4LX:
- case PCI_DEVICE_ID_MELLANOX_CONNECTX5:
- case PCI_DEVICE_ID_MELLANOX_CONNECTX5VF:
- case PCI_DEVICE_ID_MELLANOX_CONNECTX5EX:
- case PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF:
- tunnel_en = 1;
- break;
- default:
- break;
- }
INFO("PCI information matches, using device \"%s\""
" (SR-IOV: %s)",
list[i]->name,
@@ -675,6 +661,9 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev)
* Multi-packet send is supported by ConnectX-4 Lx PF as well
* as all ConnectX-5 devices.
*/
+#ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
+ attrs_out.comp_mask |= MLX5DV_CONTEXT_MASK_TUNNEL_OFFLOADS;
+#endif
mlx5_glue->dv_query_device(attr_ctx, &attrs_out);
if (attrs_out.flags & MLX5DV_CONTEXT_FLAGS_MPW_ALLOWED) {
if (attrs_out.flags & MLX5DV_CONTEXT_FLAGS_ENHANCED_MPW) {
@@ -693,6 +682,17 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev)
cqe_comp = 0;
else
cqe_comp = 1;
+#ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
+ if (attrs_out.comp_mask & MLX5DV_CONTEXT_MASK_TUNNEL_OFFLOADS) {
+ tunnel_en = ((attrs_out.tunnel_offloads_caps &
+ MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_VXLAN) &&
+ (attrs_out.tunnel_offloads_caps &
+ MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_GRE));
+ }
+ DEBUG("Tunnel offloading is %ssupported", tunnel_en ? "" : "not ");
+#else
+ WARN("Tunnel offloading disabled due to old OFED/rdma-core version");
+#endif
if (mlx5_glue->query_device_ex(attr_ctx, NULL, &device_attr))
goto error;
INFO("%u port(s) detected", device_attr.orig_attr.phys_port_cnt);
@@ -838,15 +838,6 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev)
IBV_DEVICE_RAW_IP_CSUM);
DEBUG("checksum offloading is %ssupported",
(config.hw_csum ? "" : "not "));
-
-#ifdef HAVE_IBV_DEVICE_VXLAN_SUPPORT
- config.hw_csum_l2tun =
- !!(exp_device_attr.exp_device_cap_flags &
- IBV_DEVICE_VXLAN_SUPPORT);
-#endif
- DEBUG("Rx L2 tunnel checksum offloads are %ssupported",
- (config.hw_csum_l2tun ? "" : "not "));
-
#ifdef HAVE_IBV_DEVICE_COUNTERS_SET_SUPPORT
config.flow_counter_en = !!(device_attr.max_counter_sets);
mlx5_glue->describe_counter_set(ctx, 0, &cs_desc);
diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
index 965c19f21..3e2d96abc 100644
--- a/drivers/net/mlx5/mlx5.h
+++ b/drivers/net/mlx5/mlx5.h
@@ -75,13 +75,13 @@ TAILQ_HEAD(mlx5_flows, rte_flow);
*/
struct mlx5_dev_config {
unsigned int hw_csum:1; /* Checksum offload is supported. */
- unsigned int hw_csum_l2tun:1; /* Same for L2 tunnels. */
unsigned int hw_vlan_strip:1; /* VLAN stripping is supported. */
unsigned int hw_fcs_strip:1; /* FCS stripping is supported. */
unsigned int hw_padding:1; /* End alignment padding is supported. */
unsigned int sriov:1; /* This is a VF or PF with VF devices. */
unsigned int mps:2; /* Multi-packet send supported mode. */
- unsigned int tunnel_en:1; /* Whether tunnel is supported. */
+ unsigned int tunnel_en:1;
+ /* Whether tunnel stateless offloads are supported. */
unsigned int flow_counter_en:1; /* Whether flow counter is supported. */
unsigned int cqe_comp:1; /* CQE compression is enabled. */
unsigned int tso:1; /* Whether TSO is supported. */
diff --git a/drivers/net/mlx5/mlx5_rxq.c b/drivers/net/mlx5/mlx5_rxq.c
index ff58c4921..238fa7e56 100644
--- a/drivers/net/mlx5/mlx5_rxq.c
+++ b/drivers/net/mlx5/mlx5_rxq.c
@@ -1006,7 +1006,7 @@ mlx5_priv_rxq_new(struct priv *priv, uint16_t idx, uint16_t desc,
/* Toggle RX checksum offload if hardware supports it. */
tmpl->rxq.csum = !!(conf->offloads & DEV_RX_OFFLOAD_CHECKSUM);
tmpl->rxq.csum_l2tun = (!!(conf->offloads & DEV_RX_OFFLOAD_CHECKSUM) &&
- priv->config.hw_csum_l2tun);
+ priv->config.tunnel_en);
tmpl->rxq.hw_timestamp = !!(conf->offloads & DEV_RX_OFFLOAD_TIMESTAMP);
/* Configure VLAN stripping. */
tmpl->rxq.vlan_strip = !!(conf->offloads & DEV_RX_OFFLOAD_VLAN_STRIP);
--
2.12.0
next reply other threads:[~2018-02-25 7:28 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-25 7:28 Shahaf Shuler [this message]
2018-02-26 8:12 ` Nélio Laranjeiro
2018-02-28 8:22 ` Shahaf Shuler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180225072837.85663-1-shahafs@mellanox.com \
--to=shahafs@mellanox.com \
--cc=adrien.mazarguil@6wind.com \
--cc=dev@dpdk.org \
--cc=nelio.laranjeiro@6wind.com \
--cc=stable@dpdk.org \
--cc=yskoh@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).