From: Ajit Khaparde <ajit.khaparde@broadcom.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH] net/bnxt: switch to the new offload API
Date: Tue, 6 Mar 2018 11:40:20 -0800 [thread overview]
Message-ID: <20180306194020.71231-1-ajit.khaparde@broadcom.com> (raw)
Update bnxt PMD to new ethdev offloads API.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
drivers/net/bnxt/bnxt_ethdev.c | 59 +++++++++++++++++++++++++++++-------------
1 file changed, 41 insertions(+), 18 deletions(-)
diff --git a/drivers/net/bnxt/bnxt_ethdev.c b/drivers/net/bnxt/bnxt_ethdev.c
index 21c46f833..cca4ef40c 100644
--- a/drivers/net/bnxt/bnxt_ethdev.c
+++ b/drivers/net/bnxt/bnxt_ethdev.c
@@ -146,6 +146,27 @@ static const struct rte_pci_id bnxt_pci_id_map[] = {
ETH_RSS_NONFRAG_IPV6_TCP | \
ETH_RSS_NONFRAG_IPV6_UDP)
+#define BNXT_DEV_TX_OFFLOAD_SUPPORT (DEV_TX_OFFLOAD_VLAN_INSERT | \
+ DEV_TX_OFFLOAD_IPV4_CKSUM | \
+ DEV_TX_OFFLOAD_TCP_CKSUM | \
+ DEV_TX_OFFLOAD_UDP_CKSUM | \
+ DEV_TX_OFFLOAD_TCP_TSO | \
+ DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM | \
+ DEV_TX_OFFLOAD_VXLAN_TNL_TSO | \
+ DEV_TX_OFFLOAD_GRE_TNL_TSO | \
+ DEV_TX_OFFLOAD_IPIP_TNL_TSO | \
+ DEV_TX_OFFLOAD_GENEVE_TNL_TSO | \
+ DEV_TX_OFFLOAD_MULTI_SEGS)
+
+#define BNXT_DEV_RX_OFFLOAD_SUPPORT (DEV_RX_OFFLOAD_VLAN_FILTER | \
+ DEV_RX_OFFLOAD_VLAN_STRIP | \
+ DEV_RX_OFFLOAD_IPV4_CKSUM | \
+ DEV_RX_OFFLOAD_UDP_CKSUM | \
+ DEV_RX_OFFLOAD_TCP_CKSUM | \
+ DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM | \
+ DEV_RX_OFFLOAD_JUMBO_FRAME | \
+ DEV_RX_OFFLOAD_CRC_STRIP)
+
static int bnxt_vlan_offload_set_op(struct rte_eth_dev *dev, int mask);
static void bnxt_print_link_info(struct rte_eth_dev *eth_dev);
@@ -430,21 +451,14 @@ static void bnxt_dev_info_get_op(struct rte_eth_dev *eth_dev,
dev_info->min_rx_bufsize = 1;
dev_info->max_rx_pktlen = BNXT_MAX_MTU + ETHER_HDR_LEN + ETHER_CRC_LEN
+ VLAN_TAG_SIZE;
- dev_info->rx_offload_capa = DEV_RX_OFFLOAD_VLAN_STRIP |
- DEV_RX_OFFLOAD_IPV4_CKSUM |
- DEV_RX_OFFLOAD_UDP_CKSUM |
- DEV_RX_OFFLOAD_TCP_CKSUM |
- DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM;
- dev_info->tx_offload_capa = DEV_TX_OFFLOAD_VLAN_INSERT |
- DEV_TX_OFFLOAD_IPV4_CKSUM |
- DEV_TX_OFFLOAD_TCP_CKSUM |
- DEV_TX_OFFLOAD_UDP_CKSUM |
- DEV_TX_OFFLOAD_TCP_TSO |
- DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM |
- DEV_TX_OFFLOAD_VXLAN_TNL_TSO |
- DEV_TX_OFFLOAD_GRE_TNL_TSO |
- DEV_TX_OFFLOAD_IPIP_TNL_TSO |
- DEV_TX_OFFLOAD_GENEVE_TNL_TSO;
+
+ dev_info->rx_queue_offload_capa = BNXT_DEV_RX_OFFLOAD_SUPPORT;
+ dev_info->rx_offload_capa = BNXT_DEV_RX_OFFLOAD_SUPPORT;
+ if (bp->flags & BNXT_FLAG_PTP_SUPPORTED)
+ dev_info->rx_offload_capa |= DEV_RX_OFFLOAD_TIMESTAMP;
+ dev_info->tx_queue_offload_capa = BNXT_DEV_TX_OFFLOAD_SUPPORT;
+ dev_info->tx_offload_capa = BNXT_DEV_TX_OFFLOAD_SUPPORT;
+ dev_info->flow_type_rss_offloads = BNXT_ETH_RSS_SUPPORT;
/* *INDENT-OFF* */
dev_info->default_rxconf = (struct rte_eth_rxconf) {
@@ -454,7 +468,8 @@ static void bnxt_dev_info_get_op(struct rte_eth_dev *eth_dev,
.wthresh = 0,
},
.rx_free_thresh = 32,
- .rx_drop_en = 0,
+ /* If no descriptors available, pkts are dropped by default */
+ .rx_drop_en = 1,
};
dev_info->default_txconf = (struct rte_eth_txconf) {
@@ -465,8 +480,6 @@ static void bnxt_dev_info_get_op(struct rte_eth_dev *eth_dev,
},
.tx_free_thresh = 32,
.tx_rs_thresh = 32,
- .txq_flags = ETH_TXQ_FLAGS_NOMULTSEGS |
- ETH_TXQ_FLAGS_NOOFFLOADS,
};
eth_dev->data->dev_conf.intr_conf.lsc = 1;
@@ -510,6 +523,16 @@ static void bnxt_dev_info_get_op(struct rte_eth_dev *eth_dev,
static int bnxt_dev_configure_op(struct rte_eth_dev *eth_dev)
{
struct bnxt *bp = (struct bnxt *)eth_dev->data->dev_private;
+ uint64_t tx_offloads = eth_dev->data->dev_conf.txmode.offloads;
+ uint64_t rx_offloads = eth_dev->data->dev_conf.rxmode.offloads;
+
+ if (tx_offloads != BNXT_DEV_TX_OFFLOAD_SUPPORT)
+ PMD_DRV_LOG(ERR, "Tx offloads requested 0x%lx supported 0x%x\n",
+ tx_offloads, BNXT_DEV_TX_OFFLOAD_SUPPORT);
+
+ if (rx_offloads != BNXT_DEV_RX_OFFLOAD_SUPPORT)
+ PMD_DRV_LOG(ERR, "Rx offloads requested 0x%lx supported 0x%x\n",
+ rx_offloads, BNXT_DEV_RX_OFFLOAD_SUPPORT);
bp->rx_queues = (void *)eth_dev->data->rx_queues;
bp->tx_queues = (void *)eth_dev->data->tx_queues;
--
2.14.3 (Apple Git-98)
next reply other threads:[~2018-03-06 19:40 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-06 19:40 Ajit Khaparde [this message]
2018-03-21 19:08 ` Ferruh Yigit
2018-03-21 19:27 ` Ajit Khaparde
2018-03-22 6:22 ` Shahaf Shuler
2018-03-26 22:47 ` [dpdk-dev] [PATCH v2] " Ajit Khaparde
2018-03-30 10:38 ` Ferruh Yigit
2018-04-02 22:25 ` [dpdk-dev] [PATCH v3 1/2] " Ajit Khaparde
2018-04-02 22:25 ` [dpdk-dev] [PATCH v3 2/2] net/bnxt: fix rx_drop_en setting Ajit Khaparde
2018-04-05 14:36 ` [dpdk-dev] [PATCH v3 1/2] net/bnxt: switch to the new offload API Ferruh Yigit
2018-04-06 0:22 ` [dpdk-dev] [PATCH v4 1/2] net/bnxt: fix rx_drop_en setting Ajit Khaparde
2018-04-06 0:22 ` [dpdk-dev] [PATCH v4 2/2] net/bnxt: switch to the new offload API Ajit Khaparde
2018-04-06 15:11 ` Ferruh Yigit
2018-04-07 17:40 ` [dpdk-dev] [PATCH v5 1/2] net/bnxt: fix rx_drop_en setting Ajit Khaparde
2018-04-07 17:40 ` [dpdk-dev] [PATCH v5 2/2] net/bnxt: switch to the new offload API Ajit Khaparde
2018-04-09 16:53 ` [dpdk-dev] [dpdk-stable] [PATCH v5 1/2] net/bnxt: fix rx_drop_en setting Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180306194020.71231-1-ajit.khaparde@broadcom.com \
--to=ajit.khaparde@broadcom.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).