From: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
To: jerin.jacob@caviumnetworks.com,
santosh.shukla@caviumnetworks.com, ferruh.yigit@intel.com,
shahafs@mellanox.com
Cc: dev@dpdk.org, Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Subject: [dpdk-dev] [PATCH v2] net/octeontx: use the new offload APIs
Date: Mon, 26 Mar 2018 16:32:01 +0530 [thread overview]
Message-ID: <20180326110201.8445-1-pbhagavatula@caviumnetworks.com> (raw)
In-Reply-To: <20180308190716.31061-1-pbhagavatula@caviumnetworks.com>
Use the new Rx/Tx offload APIs and remove the old style offloads.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
---
drivers/net/octeontx/octeontx_ethdev.c | 82 +++++++++++++++++++++++++---------
drivers/net/octeontx/octeontx_ethdev.h | 3 ++
2 files changed, 65 insertions(+), 20 deletions(-)
diff --git a/drivers/net/octeontx/octeontx_ethdev.c b/drivers/net/octeontx/octeontx_ethdev.c
index b739c0b39..3eb765eb1 100644
--- a/drivers/net/octeontx/octeontx_ethdev.c
+++ b/drivers/net/octeontx/octeontx_ethdev.c
@@ -262,6 +262,8 @@ octeontx_dev_configure(struct rte_eth_dev *dev)
struct rte_eth_rxmode *rxmode = &conf->rxmode;
struct rte_eth_txmode *txmode = &conf->txmode;
struct octeontx_nic *nic = octeontx_pmd_priv(dev);
+ uint64_t configured_offloads;
+ uint64_t unsupported_offloads;
int ret;
PMD_INIT_FUNC_TRACE();
@@ -283,34 +285,38 @@ octeontx_dev_configure(struct rte_eth_dev *dev)
return -EINVAL;
}
- if (!rxmode->hw_strip_crc) {
+ configured_offloads = rxmode->offloads;
+
+ if (!(configured_offloads & DEV_RX_OFFLOAD_CRC_STRIP)) {
PMD_INIT_LOG(NOTICE, "can't disable hw crc strip");
- rxmode->hw_strip_crc = 1;
+ configured_offloads |= DEV_RX_OFFLOAD_CRC_STRIP;
}
- if (rxmode->hw_ip_checksum) {
- PMD_INIT_LOG(NOTICE, "rxcksum not supported");
- rxmode->hw_ip_checksum = 0;
- }
+ unsupported_offloads = configured_offloads & ~OCTEONTX_RX_OFFLOADS;
- if (rxmode->split_hdr_size) {
- octeontx_log_err("rxmode does not support split header");
- return -EINVAL;
+ if (unsupported_offloads) {
+ PMD_INIT_LOG(ERR, "Rx offloads 0x%" PRIx64 " are not supported. "
+ "Requested 0x%" PRIx64 " supported 0x%" PRIx64 "\n",
+ unsupported_offloads, configured_offloads,
+ (uint64_t)OCTEONTX_RX_OFFLOADS);
+ return -ENOTSUP;
}
- if (rxmode->hw_vlan_filter) {
- octeontx_log_err("VLAN filter not supported");
- return -EINVAL;
- }
+ configured_offloads = txmode->offloads;
- if (rxmode->hw_vlan_extend) {
- octeontx_log_err("VLAN extended not supported");
- return -EINVAL;
+ if (!(configured_offloads & DEV_TX_OFFLOAD_MT_LOCKFREE)) {
+ PMD_INIT_LOG(NOTICE, "cant disable lockfree tx");
+ configured_offloads |= DEV_TX_OFFLOAD_MT_LOCKFREE;
}
- if (rxmode->enable_lro) {
- octeontx_log_err("LRO not supported");
- return -EINVAL;
+ unsupported_offloads = configured_offloads & ~OCTEONTX_TX_OFFLOADS;
+
+ if (unsupported_offloads) {
+ PMD_INIT_LOG(ERR, "Tx offloads 0x%" PRIx64 " are not supported."
+ "Requested 0x%" PRIx64 " supported 0x%" PRIx64 ".\n",
+ unsupported_offloads, configured_offloads,
+ (uint64_t)OCTEONTX_TX_OFFLOADS);
+ return -ENOTSUP;
}
if (conf->link_speeds & ETH_LINK_SPEED_FIXED) {
@@ -630,6 +636,7 @@ octeontx_dev_info(struct rte_eth_dev *dev,
dev_info->default_rxconf = (struct rte_eth_rxconf) {
.rx_free_thresh = 0,
.rx_drop_en = 0,
+ .offloads = OCTEONTX_RX_OFFLOADS,
};
dev_info->default_txconf = (struct rte_eth_txconf) {
@@ -750,10 +757,11 @@ octeontx_dev_tx_queue_setup(struct rte_eth_dev *dev, uint16_t qidx,
struct octeontx_txq *txq = NULL;
uint16_t dq_num;
int res = 0;
+ uint64_t configured_offloads;
+ uint64_t unsupported_offloads;
RTE_SET_USED(nb_desc);
RTE_SET_USED(socket_id);
- RTE_SET_USED(tx_conf);
dq_num = (nic->port_id * PKO_VF_NUM_DQ) + qidx;
@@ -771,6 +779,22 @@ octeontx_dev_tx_queue_setup(struct rte_eth_dev *dev, uint16_t qidx,
dev->data->tx_queues[qidx] = NULL;
}
+ configured_offloads = tx_conf->offloads;
+
+ if (!(configured_offloads & DEV_TX_OFFLOAD_MT_LOCKFREE)) {
+ PMD_INIT_LOG(NOTICE, "cant disable lockfree tx");
+ configured_offloads |= DEV_TX_OFFLOAD_MT_LOCKFREE;
+ }
+
+ unsupported_offloads = configured_offloads & ~OCTEONTX_TX_OFFLOADS;
+ if (unsupported_offloads) {
+ PMD_INIT_LOG(ERR, "Tx offloads 0x%" PRIx64 " are not supported."
+ "Requested 0x%" PRIx64 " supported 0x%" PRIx64 ".\n",
+ unsupported_offloads, configured_offloads,
+ (uint64_t)OCTEONTX_TX_OFFLOADS);
+ return -ENOTSUP;
+ }
+
/* Allocating tx queue data structure */
txq = rte_zmalloc_socket("ethdev TX queue", sizeof(struct octeontx_txq),
RTE_CACHE_LINE_SIZE, nic->node);
@@ -826,6 +850,8 @@ octeontx_dev_rx_queue_setup(struct rte_eth_dev *dev, uint16_t qidx,
uint8_t gaura;
unsigned int ev_queues = (nic->ev_queues * nic->port_id) + qidx;
unsigned int ev_ports = (nic->ev_ports * nic->port_id) + qidx;
+ uint64_t configured_offloads;
+ uint64_t unsupported_offloads;
RTE_SET_USED(nb_desc);
@@ -848,6 +874,22 @@ octeontx_dev_rx_queue_setup(struct rte_eth_dev *dev, uint16_t qidx,
port = nic->port_id;
+ configured_offloads = rx_conf->offloads;
+
+ if (!(configured_offloads & DEV_RX_OFFLOAD_CRC_STRIP)) {
+ PMD_INIT_LOG(NOTICE, "can't disable hw crc strip");
+ configured_offloads |= DEV_RX_OFFLOAD_CRC_STRIP;
+ }
+
+ unsupported_offloads = configured_offloads & ~OCTEONTX_RX_OFFLOADS;
+
+ if (unsupported_offloads) {
+ PMD_INIT_LOG(ERR, "Rx offloads 0x%" PRIx64 " are not supported. "
+ "Requested 0x%" PRIx64 " supported 0x%" PRIx64 "\n",
+ unsupported_offloads, configured_offloads,
+ (uint64_t)OCTEONTX_RX_OFFLOADS);
+ return -ENOTSUP;
+ }
/* Rx deferred start is not supported */
if (rx_conf->rx_deferred_start) {
octeontx_log_err("rx deferred start not supported");
diff --git a/drivers/net/octeontx/octeontx_ethdev.h b/drivers/net/octeontx/octeontx_ethdev.h
index 10e42e142..9d6c22b0d 100644
--- a/drivers/net/octeontx/octeontx_ethdev.h
+++ b/drivers/net/octeontx/octeontx_ethdev.h
@@ -28,6 +28,9 @@
#define OCTEONTX_MAX_BGX_PORTS 4
#define OCTEONTX_MAX_LMAC_PER_BGX 4
+#define OCTEONTX_RX_OFFLOADS DEV_RX_OFFLOAD_CRC_STRIP
+#define OCTEONTX_TX_OFFLOADS DEV_TX_OFFLOAD_MT_LOCKFREE
+
static inline struct octeontx_nic *
octeontx_pmd_priv(struct rte_eth_dev *dev)
{
--
2.16.2
next prev parent reply other threads:[~2018-03-26 11:02 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-08 19:07 [dpdk-dev] [PATCH] " Pavan Nikhilesh
2018-03-11 18:14 ` santosh
2018-03-21 19:25 ` Ferruh Yigit
2018-03-22 6:26 ` Shahaf Shuler
2018-03-26 7:30 ` Pavan Nikhilesh
2018-03-26 11:02 ` Pavan Nikhilesh [this message]
2018-04-05 13:13 ` [dpdk-dev] [PATCH v2] " Ferruh Yigit
2018-04-05 13:23 ` [dpdk-dev] [PATCH v3] " Pavan Nikhilesh
2018-04-05 13:50 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180326110201.8445-1-pbhagavatula@caviumnetworks.com \
--to=pbhagavatula@caviumnetworks.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=jerin.jacob@caviumnetworks.com \
--cc=santosh.shukla@caviumnetworks.com \
--cc=shahafs@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).