From: Shahaf Shuler <shahafs@mellanox.com>
To: thomas@monjalon.net, ferruh.yigit@intel.com
Cc: dev@dpdk.org
Subject: [dpdk-dev] [PATCH] ethdev: remove new to old offloads API helpers
Date: Mon, 16 Apr 2018 09:02:03 +0300 [thread overview]
Message-ID: <20180416060203.57358-1-shahafs@mellanox.com> (raw)
According to
commit 315ee8374e0e ("doc: reduce initial offload API rework scope
to drivers")
All PMDs should have moved to the new offloads API. Therefore it is safe
to remove the new->old convert helps.
The old->new helpers will remain to support application which still use
the old API.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
---
lib/librte_ether/rte_ethdev.c | 100 +-----------------------------------------
1 file changed, 2 insertions(+), 98 deletions(-)
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 3c049ef43c..e568b8ba91 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -964,60 +964,6 @@ rte_eth_convert_rx_offload_bitfield(const struct rte_eth_rxmode *rxmode,
*rx_offloads = offloads;
}
-/**
- * A conversion function from rxmode offloads API.
- */
-static void
-rte_eth_convert_rx_offloads(const uint64_t rx_offloads,
- struct rte_eth_rxmode *rxmode)
-{
-
- if (rx_offloads & DEV_RX_OFFLOAD_HEADER_SPLIT)
- rxmode->header_split = 1;
- else
- rxmode->header_split = 0;
- if (rx_offloads & DEV_RX_OFFLOAD_CHECKSUM)
- rxmode->hw_ip_checksum = 1;
- else
- rxmode->hw_ip_checksum = 0;
- if (rx_offloads & DEV_RX_OFFLOAD_VLAN_FILTER)
- rxmode->hw_vlan_filter = 1;
- else
- rxmode->hw_vlan_filter = 0;
- if (rx_offloads & DEV_RX_OFFLOAD_VLAN_STRIP)
- rxmode->hw_vlan_strip = 1;
- else
- rxmode->hw_vlan_strip = 0;
- if (rx_offloads & DEV_RX_OFFLOAD_VLAN_EXTEND)
- rxmode->hw_vlan_extend = 1;
- else
- rxmode->hw_vlan_extend = 0;
- if (rx_offloads & DEV_RX_OFFLOAD_JUMBO_FRAME)
- rxmode->jumbo_frame = 1;
- else
- rxmode->jumbo_frame = 0;
- if (rx_offloads & DEV_RX_OFFLOAD_CRC_STRIP)
- rxmode->hw_strip_crc = 1;
- else
- rxmode->hw_strip_crc = 0;
- if (rx_offloads & DEV_RX_OFFLOAD_SCATTER)
- rxmode->enable_scatter = 1;
- else
- rxmode->enable_scatter = 0;
- if (rx_offloads & DEV_RX_OFFLOAD_TCP_LRO)
- rxmode->enable_lro = 1;
- else
- rxmode->enable_lro = 0;
- if (rx_offloads & DEV_RX_OFFLOAD_TIMESTAMP)
- rxmode->hw_timestamp = 1;
- else
- rxmode->hw_timestamp = 0;
- if (rx_offloads & DEV_RX_OFFLOAD_SECURITY)
- rxmode->security = 1;
- else
- rxmode->security = 0;
-}
-
const char * __rte_experimental
rte_eth_dev_rx_offload_name(uint64_t offload)
{
@@ -1108,13 +1054,9 @@ rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
* Convert between the offloads API to enable PMDs to support
* only one of them.
*/
- if (dev_conf->rxmode.ignore_offload_bitfield == 0) {
+ if (dev_conf->rxmode.ignore_offload_bitfield == 0)
rte_eth_convert_rx_offload_bitfield(
&dev_conf->rxmode, &local_conf.rxmode.offloads);
- } else {
- rte_eth_convert_rx_offloads(dev_conf->rxmode.offloads,
- &local_conf.rxmode);
- }
/* Copy the dev_conf parameter into the dev structure */
memcpy(&dev->data->dev_conf, &local_conf, sizeof(dev->data->dev_conf));
@@ -1566,30 +1508,6 @@ rte_eth_convert_txq_flags(const uint32_t txq_flags, uint64_t *tx_offloads)
*tx_offloads = offloads;
}
-/**
- * A conversion function from offloads API.
- */
-static void
-rte_eth_convert_txq_offloads(const uint64_t tx_offloads, uint32_t *txq_flags)
-{
- uint32_t flags = 0;
-
- if (!(tx_offloads & DEV_TX_OFFLOAD_MULTI_SEGS))
- flags |= ETH_TXQ_FLAGS_NOMULTSEGS;
- if (!(tx_offloads & DEV_TX_OFFLOAD_VLAN_INSERT))
- flags |= ETH_TXQ_FLAGS_NOVLANOFFL;
- if (!(tx_offloads & DEV_TX_OFFLOAD_SCTP_CKSUM))
- flags |= ETH_TXQ_FLAGS_NOXSUMSCTP;
- if (!(tx_offloads & DEV_TX_OFFLOAD_UDP_CKSUM))
- flags |= ETH_TXQ_FLAGS_NOXSUMUDP;
- if (!(tx_offloads & DEV_TX_OFFLOAD_TCP_CKSUM))
- flags |= ETH_TXQ_FLAGS_NOXSUMTCP;
- if (tx_offloads & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
- flags |= (ETH_TXQ_FLAGS_NOREFCOUNT | ETH_TXQ_FLAGS_NOMULTMEMP);
-
- *txq_flags = flags;
-}
-
int
rte_eth_tx_queue_setup(uint16_t port_id, uint16_t tx_queue_id,
uint16_t nb_tx_desc, unsigned int socket_id,
@@ -1654,12 +1572,7 @@ rte_eth_tx_queue_setup(uint16_t port_id, uint16_t tx_queue_id,
* only one of them.
*/
local_conf = *tx_conf;
- if (tx_conf->txq_flags & ETH_TXQ_FLAGS_IGNORE) {
- rte_eth_convert_txq_offloads(tx_conf->offloads,
- &local_conf.txq_flags);
- /* Keep the ignore flag. */
- local_conf.txq_flags |= ETH_TXQ_FLAGS_IGNORE;
- } else {
+ if (!(tx_conf->txq_flags & ETH_TXQ_FLAGS_IGNORE)) {
rte_eth_convert_txq_flags(tx_conf->txq_flags,
&local_conf.offloads);
}
@@ -2632,19 +2545,10 @@ rte_eth_dev_set_vlan_offload(uint16_t port_id, int offload_mask)
return ret;
RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->vlan_offload_set, -ENOTSUP);
-
- /*
- * Convert to the offload bitfield API just in case the underlying PMD
- * still supporting it.
- */
- rte_eth_convert_rx_offloads(dev->data->dev_conf.rxmode.offloads,
- &dev->data->dev_conf.rxmode);
ret = (*dev->dev_ops->vlan_offload_set)(dev, mask);
if (ret) {
/* hit an error restore original values */
dev->data->dev_conf.rxmode.offloads = orig_offloads;
- rte_eth_convert_rx_offloads(dev->data->dev_conf.rxmode.offloads,
- &dev->data->dev_conf.rxmode);
}
return eth_err(port_id, ret);
--
2.12.0
next reply other threads:[~2018-04-16 6:02 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-16 6:02 Shahaf Shuler [this message]
2018-04-16 7:28 ` Thomas Monjalon
2018-04-17 8:33 ` [dpdk-dev] [PATCH v2] " Shahaf Shuler
2018-04-17 11:23 ` Ferruh Yigit
2018-04-17 11:53 ` Thomas Monjalon
2018-04-17 13:45 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180416060203.57358-1-shahafs@mellanox.com \
--to=shahafs@mellanox.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).