DPDK patches and discussions
 help / color / mirror / Atom feed
From: Declan Doherty <declan.doherty@intel.com>
To: dev@dpdk.org
Cc: Ferruh Yigit <ferruh.yigit@intel.com>,
	Declan Doherty <declan.doherty@intel.com>
Subject: [dpdk-dev] [PATCH v6 1/4] ethdev: Add tunnel encap/decap actions
Date: Thu, 26 Apr 2018 13:08:14 +0100	[thread overview]
Message-ID: <20180426120817.6612-2-declan.doherty@intel.com> (raw)
In-Reply-To: <20180426120817.6612-1-declan.doherty@intel.com>

Add new flow action types and associated action data structures to
support the encapsulation and decapsulation of VXLAN and NVGRE tunnel
endpoints.

The RTE_FLOW_ACTION_TYPE_[VXLAN/NVGRE]_ENCAP action will cause the
matching flow to be encapsulated in the tunnel endpoint overlay
defined in the [vxlan/nvgre]_encap action data.

The RTE_FLOW_ACTION_TYPE_[VXLAN/NVGRE]_DECAP action will cause all
headers associated with the outer most tunnel endpoint of the specified
type for the matching flows.

Signed-off-by: Declan Doherty <declan.doherty@intel.com>
---
 doc/guides/prog_guide/rte_flow.rst | 107 +++++++++++++++++++++++++++++++++++++
 lib/librte_ether/rte_flow.h        | 103 +++++++++++++++++++++++++++++++++++
 2 files changed, 210 insertions(+)

diff --git a/doc/guides/prog_guide/rte_flow.rst b/doc/guides/prog_guide/rte_flow.rst
index 629cc90a9..a7197cb7e 100644
--- a/doc/guides/prog_guide/rte_flow.rst
+++ b/doc/guides/prog_guide/rte_flow.rst
@@ -1909,6 +1909,113 @@ Implements ``OFPAT_PUSH_MPLS`` ("push a new MPLS tag") as defined by the
    | ``ethertype`` | EtherType |
    +---------------+-----------+
 
+Action: ``VXLAN_ENCAP``
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Performs a VXLAN encapsulation action by encapsulating the matched flow in the
+VXLAN tunnel as defined in the``rte_flow_action_vxlan_encap`` flow items
+definition.
+
+This action modifies the payload of matched flows. The flow definition specified
+in the ``rte_flow_action_tunnel_encap`` action structure must define a valid
+VLXAN network overlay which conforms with RFC 7348 (Virtual eXtensible Local
+Area Network (VXLAN): A Framework for Overlaying Virtualized Layer 2 Networks
+over Layer 3 Networks). The pattern must be terminated with the
+RTE_FLOW_ITEM_TYPE_END item type.
+
+.. _table_rte_flow_action_vxlan_encap:
+
+.. table:: VXLAN_ENCAP
+
+   +----------------+-------------------------------------+
+   | Field          | Value                               |
+   +================+=====================================+
+   | ``definition`` | Tunnel end-point overlay definition |
+   +----------------+-------------------------------------+
+
+.. _table_rte_flow_action_vxlan_encap_example:
+
+.. table:: IPv4 VxLAN flow pattern example.
+
+   +-------+----------+
+   | Index | Item     |
+   +=======+==========+
+   | 0     | Ethernet |
+   +-------+----------+
+   | 1     | IPv4     |
+   +-------+----------+
+   | 2     | UDP      |
+   +-------+----------+
+   | 3     | VXLAN    |
+   +-------+----------+
+   | 4     | END      |
+   +-------+----------+
+
+Action: ``VXLAN_DECAP``
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Performs a decapsulation action by stripping all headers of the VXLAN tunnel
+network overlay from the matched flow.
+
+The flow items pattern defined for the flow rule with which a ``VXLAN_DECAP``
+action is specified, must define a valid VXLAN tunnel as per RFC7348. If the
+flow pattern does not specify a valid VXLAN tunnel then a
+RTE_FLOW_ERROR_TYPE_ACTION error should be returned.
+
+This action modifies the payload of matched flows.
+
+Action: ``NVGRE_ENCAP``
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Performs a NVGRE encapsulation action by encapsulating the matched flow in the
+NVGRE tunnel as defined in the``rte_flow_action_tunnel_encap`` flow item
+definition.
+
+This action modifies the payload of matched flows. The flow definition specified
+in the ``rte_flow_action_tunnel_encap`` action structure must defined a valid
+NVGRE network overlay which conforms with RFC 7637 (NVGRE: Network
+Virtualization Using Generic Routing Encapsulation). The pattern must be
+terminated with the RTE_FLOW_ITEM_TYPE_END item type.
+
+.. _table_rte_flow_action_nvgre_encap:
+
+.. table:: NVGRE_ENCAP
+
+   +----------------+-------------------------------------+
+   | Field          | Value                               |
+   +================+=====================================+
+   | ``definition`` | NVGRE end-point overlay definition |
+   +----------------+-------------------------------------+
+
+.. _table_rte_flow_action_nvgre_encap_example:
+
+.. table:: IPv4 NVGRE flow pattern example.
+
+   +-------+----------+
+   | Index | Item     |
+   +=======+==========+
+   | 0     | Ethernet |
+   +-------+----------+
+   | 1     | IPv4     |
+   +-------+----------+
+   | 2     | NVGRE    |
+   +-------+----------+
+   | 3     | END      |
+   +-------+----------+
+
+Action: ``NVGRE_DECAP``
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Performs a decapsulation action by stripping all headers of the NVGRE tunnel
+network overlay from the matched flow.
+
+The flow items pattern defined for the flow rule with which a ``NVGRE_DECAP``
+action is specified, must define a valid NVGRE tunnel as per RFC7637. If the
+flow pattern does not specify a valid NVGRE tunnel then a
+RTE_FLOW_ERROR_TYPE_ACTION error should be returned.
+
+This action modifies the payload of matched flows.
+
 Negative types
 ~~~~~~~~~~~~~~
 
diff --git a/lib/librte_ether/rte_flow.h b/lib/librte_ether/rte_flow.h
index f70056fbd..657cb9a99 100644
--- a/lib/librte_ether/rte_flow.h
+++ b/lib/librte_ether/rte_flow.h
@@ -1431,6 +1431,40 @@ enum rte_flow_action_type {
 	 * See struct rte_flow_action_of_push_mpls.
 	 */
 	RTE_FLOW_ACTION_TYPE_OF_PUSH_MPLS,
+
+	/**
+	 * Encapsulate flow in VXLAN tunnel as defined in
+	 * rte_flow_action_vxlan_encap action structure.
+	 *
+	 * See struct rte_flow_action_vxlan_encap.
+	 */
+	RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP,
+
+	/**
+	 * Decapsulate outer most VXLAN tunnel from matched flow.
+	 *
+	 * If flow pattern does not define a valid VXLAN tunnel (as specified by
+	 * RFC7348) then the PMD should return a RTE_FLOW_ERROR_TYPE_ACTION
+	 * error.
+	 */
+	RTE_FLOW_ACTION_TYPE_VXLAN_DECAP,
+
+	/**
+	 * Encapsulate flow in NVGRE tunnel defined in the
+	 * rte_flow_action_nvgre_encap action structure.
+	 *
+	 * See struct rte_flow_action_nvgre_encap.
+	 */
+	RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP,
+
+	/**
+	 * Decapsulate outer most NVGRE tunnel from matched flow.
+	 *
+	 * If flow pattern does not define a valid NVGRE tunnel (as specified by
+	 * RFC7637) then the PMD should return a RTE_FLOW_ERROR_TYPE_ACTION
+	 * error.
+	 */
+	RTE_FLOW_ACTION_TYPE_NVGRE_DECAP,
 };
 
 /**
@@ -1678,6 +1712,75 @@ struct rte_flow_action_of_push_mpls {
 };
 
 /**
+ * @warning
+ * @b EXPERIMENTAL: this structure may change without prior notice
+ *
+ * RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP
+ *
+ * VXLAN tunnel end-point encapsulation data definition
+ *
+ * The tunnel definition is provided through the flow item pattern, the
+ * provided pattern must conform to RFC7348 for the tunnel specified. The flow
+ * definition must be provided in order from the RTE_FLOW_ITEM_TYPE_ETH
+ * definition up the end item which is specified by RTE_FLOW_ITEM_TYPE_END.
+ *
+ * The mask field allows user to specify which fields in the flow item
+ * definitions can be ignored and which have valid data and can be used
+ * verbatim.
+ *
+ * Note: the last field is not used in the definition of a tunnel and can be
+ * ignored.
+ *
+ * Valid flow definition for RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP include:
+ *
+ * - ETH / IPV4 / UDP / VXLAN / END
+ * - ETH / IPV6 / UDP / VXLAN / END
+ * - ETH / VLAN / IPV4 / UDP / VXLAN / END
+ *
+ */
+struct rte_flow_action_vxlan_encap {
+	/**
+	 * Encapsulating vxlan tunnel definition
+	 * (terminated by the END pattern item).
+	 */
+	struct rte_flow_item *definition;
+};
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this structure may change without prior notice
+ *
+ * RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP
+ *
+ * NVGRE tunnel end-point encapsulation data definition
+ *
+ * The tunnel definition is provided through the flow item pattern  the
+ * provided pattern must conform with RFC7637. The flow definition must be
+ * provided in order from the RTE_FLOW_ITEM_TYPE_ETH definition up the end item
+ * which is specified by RTE_FLOW_ITEM_TYPE_END.
+ *
+ * The mask field allows user to specify which fields in the flow item
+ * definitions can be ignored and which have valid data and can be used
+ * verbatim.
+ *
+ * Note: the last field is not used in the definition of a tunnel and can be
+ * ignored.
+ *
+ * Valid flow definition for RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP include:
+ *
+ * - ETH / IPV4 / NVGRE / END
+ * - ETH / VLAN / IPV6 / NVGRE / END
+ *
+ */
+struct rte_flow_action_nvgre_encap {
+	/**
+	 * Encapsulating vxlan tunnel definition
+	 * (terminated by the END pattern item).
+	 */
+	struct rte_flow_item *definition;
+};
+
+/*
  * Definition of a single action.
  *
  * A list of actions is terminated by a END action.
-- 
2.14.3

  reply	other threads:[~2018-04-26 12:16 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-26 12:08 [dpdk-dev] [PATCH v6 0/4] additions to support tunnel encap/decap Declan Doherty
2018-04-26 12:08 ` Declan Doherty [this message]
2018-04-26 12:08 ` [dpdk-dev] [PATCH v6 2/4] ethdev: Add group JUMP action Declan Doherty
2018-04-26 12:08 ` [dpdk-dev] [PATCH v6 3/4] ethdev: add mark flow item to rte_flow_item_types Declan Doherty
2018-04-26 12:08 ` [dpdk-dev] [PATCH v6 4/4] ethdev: add shared counter support to rte_flow Declan Doherty
2018-04-26 14:06   ` Ori Kam
2018-04-26 14:27     ` Ferruh Yigit
2018-04-26 14:43       ` Ori Kam
2018-04-26 14:48         ` Doherty, Declan
2018-04-26 17:29 ` [dpdk-dev] [PATCH v7 0/4] " Declan Doherty
2018-04-26 17:29   ` [dpdk-dev] [PATCH v7 1/4] ethdev: Add tunnel encap/decap actions Declan Doherty
2018-04-26 17:29   ` [dpdk-dev] [PATCH v7 2/4] ethdev: Add group JUMP action Declan Doherty
2018-04-26 18:54     ` Thomas Monjalon
2018-04-27 12:24       ` Ferruh Yigit
2018-04-26 17:29   ` [dpdk-dev] [PATCH v7 3/4] ethdev: add mark flow item to rte_flow_item_types Declan Doherty
2018-04-26 18:52     ` Thomas Monjalon
2018-04-27 12:24       ` Ferruh Yigit
2018-04-26 17:29   ` [dpdk-dev] [PATCH v7 4/4] ethdev: add shared counter support to rte_flow Declan Doherty
2018-04-26 18:55     ` Thomas Monjalon
2018-04-27 12:25       ` Ferruh Yigit
2018-04-27 14:52         ` Ferruh Yigit
2018-04-26 20:58   ` [dpdk-dev] [PATCH v7 0/4] " Ferruh Yigit
2018-04-27 20:18 ` [dpdk-dev] [PATCH v6 0/4] additions to support tunnel encap/decap Michael Wildt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180426120817.6612-2-declan.doherty@intel.com \
    --to=declan.doherty@intel.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).