From: Ferruh Yigit <ferruh.yigit@intel.com>
To: Thomas Monjalon <thomas@monjalon.net>,
John McNamara <john.mcnamara@intel.com>,
Marko Kovacevic <marko.kovacevic@intel.com>
Cc: dev@dpdk.org, Ferruh Yigit <ferruh.yigit@intel.com>
Subject: [dpdk-dev] [PATCH v2] ethdev: rename folder to library name
Date: Thu, 26 Apr 2018 22:25:59 +0100 [thread overview]
Message-ID: <20180426212559.113436-1-ferruh.yigit@intel.com> (raw)
In-Reply-To: <20180403092859.71589-1-ferruh.yigit@intel.com>
Library folder name and output library name are same except a few flaws
including librte_ether.
This library is network device abstraction layer, the name "ethdev" fits
better than "ether", and library & header files already named as ethdev.
Also there is a rte_ether.h in the net library which can cause confusion.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
---
v2:
* rebased
---
MAINTAINERS | 8 ++---
doc/api/doxy-api.conf | 2 +-
doc/guides/prog_guide/source_org.rst | 2 +-
.../prog_guide/traffic_metering_and_policing.rst | 2 +-
lib/Makefile | 34 +++++++++++-----------
lib/{librte_ether => librte_ethdev}/Makefile | 0
.../ethdev_profile.c | 0
.../ethdev_profile.h | 0
lib/{librte_ether => librte_ethdev}/meson.build | 0
lib/{librte_ether => librte_ethdev}/rte_dev_info.h | 0
lib/{librte_ether => librte_ethdev}/rte_eth_ctrl.h | 0
lib/{librte_ether => librte_ethdev}/rte_ethdev.c | 0
lib/{librte_ether => librte_ethdev}/rte_ethdev.h | 0
.../rte_ethdev_core.h | 0
.../rte_ethdev_driver.h | 0
.../rte_ethdev_pci.h | 0
.../rte_ethdev_vdev.h | 0
.../rte_ethdev_version.map | 0
lib/{librte_ether => librte_ethdev}/rte_flow.c | 0
lib/{librte_ether => librte_ethdev}/rte_flow.h | 0
.../rte_flow_driver.h | 0
lib/{librte_ether => librte_ethdev}/rte_mtr.c | 0
lib/{librte_ether => librte_ethdev}/rte_mtr.h | 0
.../rte_mtr_driver.h | 0
lib/{librte_ether => librte_ethdev}/rte_tm.c | 0
lib/{librte_ether => librte_ethdev}/rte_tm.h | 0
.../rte_tm_driver.h | 0
lib/meson.build | 2 +-
28 files changed, 25 insertions(+), 25 deletions(-)
rename lib/{librte_ether => librte_ethdev}/Makefile (100%)
rename lib/{librte_ether => librte_ethdev}/ethdev_profile.c (100%)
rename lib/{librte_ether => librte_ethdev}/ethdev_profile.h (100%)
rename lib/{librte_ether => librte_ethdev}/meson.build (100%)
rename lib/{librte_ether => librte_ethdev}/rte_dev_info.h (100%)
rename lib/{librte_ether => librte_ethdev}/rte_eth_ctrl.h (100%)
rename lib/{librte_ether => librte_ethdev}/rte_ethdev.c (100%)
rename lib/{librte_ether => librte_ethdev}/rte_ethdev.h (100%)
rename lib/{librte_ether => librte_ethdev}/rte_ethdev_core.h (100%)
rename lib/{librte_ether => librte_ethdev}/rte_ethdev_driver.h (100%)
rename lib/{librte_ether => librte_ethdev}/rte_ethdev_pci.h (100%)
rename lib/{librte_ether => librte_ethdev}/rte_ethdev_vdev.h (100%)
rename lib/{librte_ether => librte_ethdev}/rte_ethdev_version.map (100%)
rename lib/{librte_ether => librte_ethdev}/rte_flow.c (100%)
rename lib/{librte_ether => librte_ethdev}/rte_flow.h (100%)
rename lib/{librte_ether => librte_ethdev}/rte_flow_driver.h (100%)
rename lib/{librte_ether => librte_ethdev}/rte_mtr.c (100%)
rename lib/{librte_ether => librte_ethdev}/rte_mtr.h (100%)
rename lib/{librte_ether => librte_ethdev}/rte_mtr_driver.h (100%)
rename lib/{librte_ether => librte_ethdev}/rte_tm.c (100%)
rename lib/{librte_ether => librte_ethdev}/rte_tm.h (100%)
rename lib/{librte_ether => librte_ethdev}/rte_tm_driver.h (100%)
diff --git a/MAINTAINERS b/MAINTAINERS
index 11bf102c2..6836171c5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -292,22 +292,22 @@ F: test/test/test_mbuf.c
Ethernet API
M: Thomas Monjalon <thomas@monjalon.net>
T: git://dpdk.org/next/dpdk-next-net
-F: lib/librte_ether/
+F: lib/librte_ethdev/
F: devtools/test-null.sh
Flow API
M: Adrien Mazarguil <adrien.mazarguil@6wind.com>
T: git://dpdk.org/next/dpdk-next-net
-F: lib/librte_ether/rte_flow*
+F: lib/librte_ethdev/rte_flow*
Traffic Management API - EXPERIMENTAL
M: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
T: git://dpdk.org/next/dpdk-next-tm
-F: lib/librte_ether/rte_tm*
+F: lib/librte_ethdev/rte_tm*
Traffic Metering and Policing API - EXPERIMENTAL
M: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
-F: lib/librte_ether/rte_mtr*
+F: lib/librte_ethdev/rte_mtr*
Baseband API - EXPERIMENTAL
M: Amr Mokhtar <amr.mokhtar@intel.com>
diff --git a/doc/api/doxy-api.conf b/doc/api/doxy-api.conf
index ad8bdcf61..5686cbb9d 100644
--- a/doc/api/doxy-api.conf
+++ b/doc/api/doxy-api.conf
@@ -48,7 +48,7 @@ INPUT = doc/api/doxy-api-index.md \
lib/librte_cryptodev \
lib/librte_distributor \
lib/librte_efd \
- lib/librte_ether \
+ lib/librte_ethdev \
lib/librte_eventdev \
lib/librte_flow_classify \
lib/librte_gro \
diff --git a/doc/guides/prog_guide/source_org.rst b/doc/guides/prog_guide/source_org.rst
index b640b0111..cee4ce6b7 100644
--- a/doc/guides/prog_guide/source_org.rst
+++ b/doc/guides/prog_guide/source_org.rst
@@ -40,7 +40,7 @@ The lib directory contains::
+-- librte_cmdline # Command line interface helper
+-- librte_distributor # Packet distributor
+-- librte_eal # Environment abstraction layer
- +-- librte_ether # Generic interface to poll mode driver
+ +-- librte_ethdev # Generic interface to poll mode driver
+-- librte_hash # Hash library
+-- librte_ip_frag # IP fragmentation library
+-- librte_kni # Kernel NIC interface
diff --git a/doc/guides/prog_guide/traffic_metering_and_policing.rst b/doc/guides/prog_guide/traffic_metering_and_policing.rst
index dc9bdd5b8..90c781eb1 100644
--- a/doc/guides/prog_guide/traffic_metering_and_policing.rst
+++ b/doc/guides/prog_guide/traffic_metering_and_policing.rst
@@ -28,7 +28,7 @@ The metering and policing stage typically sits on top of flow classification,
which is why the MTR objects are enabled through a special "meter" action.
The MTR objects are created and updated in their own name space (``rte_mtr``)
-within the ``librte_ether`` library. Whether an MTR object is private to a
+within the ``librte_ethdev`` library. Whether an MTR object is private to a
flow or potentially shared by several flows has to be specified at its
creation time.
diff --git a/lib/Makefile b/lib/Makefile
index 536775e59..057bf7890 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -18,10 +18,10 @@ DEPDIRS-librte_timer := librte_eal
DIRS-$(CONFIG_RTE_LIBRTE_CFGFILE) += librte_cfgfile
DIRS-$(CONFIG_RTE_LIBRTE_CMDLINE) += librte_cmdline
DEPDIRS-librte_cmdline := librte_eal
-DIRS-$(CONFIG_RTE_LIBRTE_ETHER) += librte_ether
-DEPDIRS-librte_ether := librte_net librte_eal librte_mempool librte_ring
-DEPDIRS-librte_ether += librte_mbuf
-DEPDIRS-librte_ether += librte_kvargs
+DIRS-$(CONFIG_RTE_LIBRTE_ETHER) += librte_ethdev
+DEPDIRS-librte_ethdev := librte_net librte_eal librte_mempool librte_ring
+DEPDIRS-librte_ethdev += librte_mbuf
+DEPDIRS-librte_ethdev += librte_kvargs
DIRS-$(CONFIG_RTE_LIBRTE_BBDEV) += librte_bbdev
DEPDIRS-librte_bbdev := librte_eal librte_mempool librte_mbuf
DIRS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += librte_cryptodev
@@ -29,14 +29,14 @@ DEPDIRS-librte_cryptodev := librte_eal librte_mempool librte_ring librte_mbuf
DEPDIRS-librte_cryptodev += librte_kvargs
DIRS-$(CONFIG_RTE_LIBRTE_SECURITY) += librte_security
DEPDIRS-librte_security := librte_eal librte_mempool librte_ring librte_mbuf
-DEPDIRS-librte_security += librte_ether
+DEPDIRS-librte_security += librte_ethdev
DEPDIRS-librte_security += librte_cryptodev
DIRS-$(CONFIG_RTE_LIBRTE_EVENTDEV) += librte_eventdev
-DEPDIRS-librte_eventdev := librte_eal librte_ring librte_ether librte_hash librte_mempool librte_timer
+DEPDIRS-librte_eventdev := librte_eal librte_ring librte_ethdev librte_hash librte_mempool librte_timer
DIRS-$(CONFIG_RTE_LIBRTE_RAWDEV) += librte_rawdev
-DEPDIRS-librte_rawdev := librte_eal librte_ether
+DEPDIRS-librte_rawdev := librte_eal librte_ethdev
DIRS-$(CONFIG_RTE_LIBRTE_VHOST) += librte_vhost
-DEPDIRS-librte_vhost := librte_eal librte_mempool librte_mbuf librte_ether \
+DEPDIRS-librte_vhost := librte_eal librte_mempool librte_mbuf librte_ethdev \
librte_net
DIRS-$(CONFIG_RTE_LIBRTE_HASH) += librte_hash
DEPDIRS-librte_hash := librte_eal librte_ring
@@ -51,18 +51,18 @@ DEPDIRS-librte_member := librte_eal librte_hash
DIRS-$(CONFIG_RTE_LIBRTE_NET) += librte_net
DEPDIRS-librte_net := librte_mbuf librte_eal
DIRS-$(CONFIG_RTE_LIBRTE_IP_FRAG) += librte_ip_frag
-DEPDIRS-librte_ip_frag := librte_eal librte_mempool librte_mbuf librte_ether
+DEPDIRS-librte_ip_frag := librte_eal librte_mempool librte_mbuf librte_ethdev
DEPDIRS-librte_ip_frag += librte_hash
DIRS-$(CONFIG_RTE_LIBRTE_GRO) += librte_gro
-DEPDIRS-librte_gro := librte_eal librte_mbuf librte_ether librte_net
+DEPDIRS-librte_gro := librte_eal librte_mbuf librte_ethdev librte_net
DIRS-$(CONFIG_RTE_LIBRTE_JOBSTATS) += librte_jobstats
DEPDIRS-librte_jobstats := librte_eal
DIRS-$(CONFIG_RTE_LIBRTE_METRICS) += librte_metrics
DEPDIRS-librte_metrics := librte_eal
DIRS-$(CONFIG_RTE_LIBRTE_BITRATE) += librte_bitratestats
-DEPDIRS-librte_bitratestats := librte_eal librte_metrics librte_ether
+DEPDIRS-librte_bitratestats := librte_eal librte_metrics librte_ethdev
DIRS-$(CONFIG_RTE_LIBRTE_LATENCY_STATS) += librte_latencystats
-DEPDIRS-librte_latencystats := librte_eal librte_metrics librte_ether librte_mbuf
+DEPDIRS-librte_latencystats := librte_eal librte_metrics librte_ethdev librte_mbuf
DIRS-$(CONFIG_RTE_LIBRTE_POWER) += librte_power
DEPDIRS-librte_power := librte_eal
DIRS-$(CONFIG_RTE_LIBRTE_METER) += librte_meter
@@ -75,9 +75,9 @@ DEPDIRS-librte_sched += librte_timer
DIRS-$(CONFIG_RTE_LIBRTE_KVARGS) += librte_kvargs
DEPDIRS-librte_kvargs := librte_eal
DIRS-$(CONFIG_RTE_LIBRTE_DISTRIBUTOR) += librte_distributor
-DEPDIRS-librte_distributor := librte_eal librte_mbuf librte_ether
+DEPDIRS-librte_distributor := librte_eal librte_mbuf librte_ethdev
DIRS-$(CONFIG_RTE_LIBRTE_PORT) += librte_port
-DEPDIRS-librte_port := librte_eal librte_mempool librte_mbuf librte_ether
+DEPDIRS-librte_port := librte_eal librte_mempool librte_mbuf librte_ethdev
DEPDIRS-librte_port += librte_ip_frag librte_sched
ifeq ($(CONFIG_RTE_LIBRTE_KNI),y)
DEPDIRS-librte_port += librte_kni
@@ -94,15 +94,15 @@ DEPDIRS-librte_pipeline += librte_table librte_port
DIRS-$(CONFIG_RTE_LIBRTE_REORDER) += librte_reorder
DEPDIRS-librte_reorder := librte_eal librte_mempool librte_mbuf
DIRS-$(CONFIG_RTE_LIBRTE_PDUMP) += librte_pdump
-DEPDIRS-librte_pdump := librte_eal librte_mempool librte_mbuf librte_ether
+DEPDIRS-librte_pdump := librte_eal librte_mempool librte_mbuf librte_ethdev
DIRS-$(CONFIG_RTE_LIBRTE_GSO) += librte_gso
-DEPDIRS-librte_gso := librte_eal librte_mbuf librte_ether librte_net
+DEPDIRS-librte_gso := librte_eal librte_mbuf librte_ethdev librte_net
DEPDIRS-librte_gso += librte_mempool
ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
DIRS-$(CONFIG_RTE_LIBRTE_KNI) += librte_kni
endif
-DEPDIRS-librte_kni := librte_eal librte_mempool librte_mbuf librte_ether
+DEPDIRS-librte_kni := librte_eal librte_mempool librte_mbuf librte_ethdev
DEPDIRS-librte_kni += librte_pci
include $(RTE_SDK)/mk/rte.subdir.mk
diff --git a/lib/librte_ether/Makefile b/lib/librte_ethdev/Makefile
similarity index 100%
rename from lib/librte_ether/Makefile
rename to lib/librte_ethdev/Makefile
diff --git a/lib/librte_ether/ethdev_profile.c b/lib/librte_ethdev/ethdev_profile.c
similarity index 100%
rename from lib/librte_ether/ethdev_profile.c
rename to lib/librte_ethdev/ethdev_profile.c
diff --git a/lib/librte_ether/ethdev_profile.h b/lib/librte_ethdev/ethdev_profile.h
similarity index 100%
rename from lib/librte_ether/ethdev_profile.h
rename to lib/librte_ethdev/ethdev_profile.h
diff --git a/lib/librte_ether/meson.build b/lib/librte_ethdev/meson.build
similarity index 100%
rename from lib/librte_ether/meson.build
rename to lib/librte_ethdev/meson.build
diff --git a/lib/librte_ether/rte_dev_info.h b/lib/librte_ethdev/rte_dev_info.h
similarity index 100%
rename from lib/librte_ether/rte_dev_info.h
rename to lib/librte_ethdev/rte_dev_info.h
diff --git a/lib/librte_ether/rte_eth_ctrl.h b/lib/librte_ethdev/rte_eth_ctrl.h
similarity index 100%
rename from lib/librte_ether/rte_eth_ctrl.h
rename to lib/librte_ethdev/rte_eth_ctrl.h
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
similarity index 100%
rename from lib/librte_ether/rte_ethdev.c
rename to lib/librte_ethdev/rte_ethdev.c
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h
similarity index 100%
rename from lib/librte_ether/rte_ethdev.h
rename to lib/librte_ethdev/rte_ethdev.h
diff --git a/lib/librte_ether/rte_ethdev_core.h b/lib/librte_ethdev/rte_ethdev_core.h
similarity index 100%
rename from lib/librte_ether/rte_ethdev_core.h
rename to lib/librte_ethdev/rte_ethdev_core.h
diff --git a/lib/librte_ether/rte_ethdev_driver.h b/lib/librte_ethdev/rte_ethdev_driver.h
similarity index 100%
rename from lib/librte_ether/rte_ethdev_driver.h
rename to lib/librte_ethdev/rte_ethdev_driver.h
diff --git a/lib/librte_ether/rte_ethdev_pci.h b/lib/librte_ethdev/rte_ethdev_pci.h
similarity index 100%
rename from lib/librte_ether/rte_ethdev_pci.h
rename to lib/librte_ethdev/rte_ethdev_pci.h
diff --git a/lib/librte_ether/rte_ethdev_vdev.h b/lib/librte_ethdev/rte_ethdev_vdev.h
similarity index 100%
rename from lib/librte_ether/rte_ethdev_vdev.h
rename to lib/librte_ethdev/rte_ethdev_vdev.h
diff --git a/lib/librte_ether/rte_ethdev_version.map b/lib/librte_ethdev/rte_ethdev_version.map
similarity index 100%
rename from lib/librte_ether/rte_ethdev_version.map
rename to lib/librte_ethdev/rte_ethdev_version.map
diff --git a/lib/librte_ether/rte_flow.c b/lib/librte_ethdev/rte_flow.c
similarity index 100%
rename from lib/librte_ether/rte_flow.c
rename to lib/librte_ethdev/rte_flow.c
diff --git a/lib/librte_ether/rte_flow.h b/lib/librte_ethdev/rte_flow.h
similarity index 100%
rename from lib/librte_ether/rte_flow.h
rename to lib/librte_ethdev/rte_flow.h
diff --git a/lib/librte_ether/rte_flow_driver.h b/lib/librte_ethdev/rte_flow_driver.h
similarity index 100%
rename from lib/librte_ether/rte_flow_driver.h
rename to lib/librte_ethdev/rte_flow_driver.h
diff --git a/lib/librte_ether/rte_mtr.c b/lib/librte_ethdev/rte_mtr.c
similarity index 100%
rename from lib/librte_ether/rte_mtr.c
rename to lib/librte_ethdev/rte_mtr.c
diff --git a/lib/librte_ether/rte_mtr.h b/lib/librte_ethdev/rte_mtr.h
similarity index 100%
rename from lib/librte_ether/rte_mtr.h
rename to lib/librte_ethdev/rte_mtr.h
diff --git a/lib/librte_ether/rte_mtr_driver.h b/lib/librte_ethdev/rte_mtr_driver.h
similarity index 100%
rename from lib/librte_ether/rte_mtr_driver.h
rename to lib/librte_ethdev/rte_mtr_driver.h
diff --git a/lib/librte_ether/rte_tm.c b/lib/librte_ethdev/rte_tm.c
similarity index 100%
rename from lib/librte_ether/rte_tm.c
rename to lib/librte_ethdev/rte_tm.c
diff --git a/lib/librte_ether/rte_tm.h b/lib/librte_ethdev/rte_tm.h
similarity index 100%
rename from lib/librte_ether/rte_tm.h
rename to lib/librte_ethdev/rte_tm.h
diff --git a/lib/librte_ether/rte_tm_driver.h b/lib/librte_ethdev/rte_tm_driver.h
similarity index 100%
rename from lib/librte_ether/rte_tm_driver.h
rename to lib/librte_ethdev/rte_tm_driver.h
diff --git a/lib/meson.build b/lib/meson.build
index 73d6f25c7..0d58c556f 100644
--- a/lib/meson.build
+++ b/lib/meson.build
@@ -9,7 +9,7 @@
# given as a dep, no need to mention ring. This is especially true for the
# core libs which are widely reused, so their deps are kept to a minimum.
libraries = [ 'compat', # just a header, used for versioning
- 'eal', 'ring', 'mempool', 'mbuf', 'net', 'ether', 'pci', # core
+ 'eal', 'ring', 'mempool', 'mbuf', 'net', 'ethdev', 'pci', # core
'metrics', # bitrate/latency stats depends on this
'hash', # efd depends on this
'kvargs', # cryptodev depends on this
--
2.14.3
next prev parent reply other threads:[~2018-04-26 21:26 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-03 9:28 [dpdk-dev] [PATCH] " Ferruh Yigit
2018-04-03 9:58 ` Bruce Richardson
2018-04-03 10:24 ` Thomas Monjalon
2018-04-03 10:57 ` Bruce Richardson
2018-04-03 12:20 ` Thomas Monjalon
2018-04-03 12:33 ` Bruce Richardson
2018-04-03 13:23 ` Wiles, Keith
2018-04-03 13:17 ` Wiles, Keith
2018-04-03 13:29 ` Ferruh Yigit
2018-04-03 16:43 ` Thomas Monjalon
2018-04-04 0:50 ` Jerin Jacob
2018-04-26 21:25 ` Ferruh Yigit [this message]
2018-04-27 0:08 ` [dpdk-dev] [PATCH v2] " Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180426212559.113436-1-ferruh.yigit@intel.com \
--to=ferruh.yigit@intel.com \
--cc=dev@dpdk.org \
--cc=john.mcnamara@intel.com \
--cc=marko.kovacevic@intel.com \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).