From: Pablo de Lara <pablo.de.lara.guarch@intel.com>
To: dev@dpdk.org
Cc: fiona.trahe@intel.com, lee.daly@intel.com,
shally.verma@cavium.com, ahmed.mansour@nxp.com,
Ashish.Gupta@cavium.com,
Pablo de Lara <pablo.de.lara.guarch@intel.com>,
Ashish Gupta <ashish.gupta@caviumnetworks.com>,
Shally Verma <shally.verma@caviumnetworks.com>
Subject: [dpdk-dev] [PATCH v4 1/5] test/compress: add initial unit tests
Date: Fri, 4 May 2018 11:22:14 +0100 [thread overview]
Message-ID: <20180504102218.30672-2-pablo.de.lara.guarch@intel.com> (raw)
In-Reply-To: <20180504102218.30672-1-pablo.de.lara.guarch@intel.com>
This commit introduces the initial tests for compressdev,
performing basic compression and decompression operations
of sample test buffers, using the Zlib library in one direction
and compressdev in another direction, to make sure that
the library is compatible with Zlib.
Due to the use of Zlib API, the test is disabled by default,
to avoid adding a new dependency on DPDK.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Acked-by: Lee Daly <lee.daly@intel.com>
---
config/common_base | 5 +
test/test/Makefile | 9 +
test/test/meson.build | 8 +
test/test/test_compressdev.c | 725 +++++++++++++++++++++++
test/test/test_compressdev_test_buffer.h | 295 +++++++++
5 files changed, 1042 insertions(+)
create mode 100644 test/test/test_compressdev.c
create mode 100644 test/test/test_compressdev_test_buffer.h
diff --git a/config/common_base b/config/common_base
index cadad08f0..5cdbcc9ad 100644
--- a/config/common_base
+++ b/config/common_base
@@ -575,6 +575,11 @@ CONFIG_RTE_LIBRTE_SECURITY=y
CONFIG_RTE_LIBRTE_COMPRESSDEV=y
CONFIG_RTE_COMPRESS_MAX_DEVS=64
+#
+# Compile compressdev unit test
+#
+CONFIG_RTE_COMPRESSDEV_TEST=n
+
#
# Compile generic event device library
#
diff --git a/test/test/Makefile b/test/test/Makefile
index 2630ab484..77d6369d6 100644
--- a/test/test/Makefile
+++ b/test/test/Makefile
@@ -180,6 +180,10 @@ SRCS-$(CONFIG_RTE_LIBRTE_PMD_RING) += test_pmd_ring_perf.c
SRCS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += test_cryptodev_blockcipher.c
SRCS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += test_cryptodev.c
+ifeq ($(CONFIG_RTE_COMPRESSDEV_TEST),y)
+SRCS-$(CONFIG_RTE_LIBRTE_COMPRESSDEV) += test_compressdev.c
+endif
+
ifeq ($(CONFIG_RTE_LIBRTE_EVENTDEV),y)
SRCS-y += test_eventdev.c
SRCS-y += test_event_ring.c
@@ -201,6 +205,11 @@ CFLAGS += $(WERROR_FLAGS)
CFLAGS += -D_GNU_SOURCE
LDLIBS += -lm
+ifeq ($(CONFIG_RTE_COMPRESSDEV_TEST),y)
+ifeq ($(CONFIG_RTE_LIBRTE_COMPRESSDEV),y)
+LDLIBS += -lz
+endif
+endif
# Disable VTA for memcpy test
ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
diff --git a/test/test/meson.build b/test/test/meson.build
index ad0a65080..d71cd3c83 100644
--- a/test/test/meson.build
+++ b/test/test/meson.build
@@ -234,6 +234,14 @@ if dpdk_conf.has('RTE_LIBRTE_KNI')
endif
test_dep_objs = []
+compress_test_dep = dependency('zlib', required: false)
+if compress_test_dep.found()
+ test_dep_objs += compress_test_dep
+ test_sources += 'test_compressdev.c'
+ test_deps += 'compressdev'
+ test_names += 'compressdev_autotest'
+endif
+
foreach d:test_deps
def_lib = get_option('default_library')
test_dep_objs += get_variable(def_lib + '_rte_' + d)
diff --git a/test/test/test_compressdev.c b/test/test/test_compressdev.c
new file mode 100644
index 000000000..e4916c034
--- /dev/null
+++ b/test/test/test_compressdev.c
@@ -0,0 +1,725 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018 Intel Corporation
+ */
+#include <string.h>
+#include <zlib.h>
+#include <math.h>
+
+#include <rte_cycles.h>
+#include <rte_malloc.h>
+#include <rte_mempool.h>
+#include <rte_mbuf.h>
+#include <rte_compressdev.h>
+
+#include "test_compressdev_test_buffer.h"
+#include "test.h"
+
+#define DEFAULT_WINDOW_SIZE 15
+#define DEFAULT_MEM_LEVEL 8
+#define MAX_DEQD_RETRIES 10
+#define DEQUEUE_WAIT_TIME 10000
+
+/*
+ * 30% extra size for compressed data compared to original data,
+ * in case data size cannot be reduced and it is actually bigger
+ * due to the compress block headers
+ */
+#define COMPRESS_BUF_SIZE_RATIO 1.3
+#define NUM_MBUFS 16
+#define NUM_OPS 16
+#define NUM_MAX_XFORMS 1
+#define NUM_MAX_INFLIGHT_OPS 128
+#define CACHE_SIZE 0
+
+const char *
+huffman_type_strings[] = {
+ [RTE_COMP_HUFFMAN_DEFAULT] = "PMD default",
+ [RTE_COMP_HUFFMAN_FIXED] = "Fixed",
+ [RTE_COMP_HUFFMAN_DYNAMIC] = "Dynamic"
+};
+
+enum zlib_direction {
+ ZLIB_NONE,
+ ZLIB_COMPRESS,
+ ZLIB_DECOMPRESS,
+ ZLIB_ALL
+};
+
+struct comp_testsuite_params {
+ struct rte_mempool *mbuf_pool;
+ struct rte_mempool *op_pool;
+ struct rte_comp_xform def_comp_xform;
+ struct rte_comp_xform def_decomp_xform;
+};
+
+static struct comp_testsuite_params testsuite_params = { 0 };
+
+static void
+testsuite_teardown(void)
+{
+ struct comp_testsuite_params *ts_params = &testsuite_params;
+
+ rte_mempool_free(ts_params->mbuf_pool);
+ rte_mempool_free(ts_params->op_pool);
+}
+
+static int
+testsuite_setup(void)
+{
+ struct comp_testsuite_params *ts_params = &testsuite_params;
+ unsigned int i;
+
+ if (rte_compressdev_count() == 0) {
+ RTE_LOG(ERR, USER1, "Need at least one compress device\n");
+ return TEST_FAILED;
+ }
+
+ uint32_t max_buf_size = 0;
+ for (i = 0; i < RTE_DIM(compress_test_bufs); i++)
+ max_buf_size = RTE_MAX(max_buf_size,
+ strlen(compress_test_bufs[i]) + 1);
+
+ max_buf_size *= COMPRESS_BUF_SIZE_RATIO;
+ /*
+ * Buffers to be used in compression and decompression.
+ * Since decompressed data might be larger than
+ * compressed data (due to block header),
+ * buffers should be big enough for both cases.
+ */
+ ts_params->mbuf_pool = rte_pktmbuf_pool_create("mbuf_pool",
+ NUM_MBUFS,
+ CACHE_SIZE, 0,
+ max_buf_size + RTE_PKTMBUF_HEADROOM,
+ rte_socket_id());
+ if (ts_params->mbuf_pool == NULL) {
+ RTE_LOG(ERR, USER1, "Large mbuf pool could not be created\n");
+ return TEST_FAILED;
+ }
+
+ ts_params->op_pool = rte_comp_op_pool_create("op_pool", NUM_OPS,
+ 0, 0, rte_socket_id());
+ if (ts_params->op_pool == NULL) {
+ RTE_LOG(ERR, USER1, "Operation pool could not be created\n");
+ goto exit;
+ }
+
+ /* Initializes default values for compress/decompress xforms */
+ ts_params->def_comp_xform.type = RTE_COMP_COMPRESS;
+ ts_params->def_comp_xform.compress.algo = RTE_COMP_ALGO_DEFLATE,
+ ts_params->def_comp_xform.compress.deflate.huffman =
+ RTE_COMP_HUFFMAN_DEFAULT;
+ ts_params->def_comp_xform.compress.level = RTE_COMP_LEVEL_PMD_DEFAULT;
+ ts_params->def_comp_xform.compress.chksum = RTE_COMP_CHECKSUM_NONE;
+ ts_params->def_comp_xform.compress.window_size = DEFAULT_WINDOW_SIZE;
+
+ ts_params->def_decomp_xform.type = RTE_COMP_DECOMPRESS;
+ ts_params->def_decomp_xform.decompress.algo = RTE_COMP_ALGO_DEFLATE,
+ ts_params->def_decomp_xform.decompress.chksum = RTE_COMP_CHECKSUM_NONE;
+ ts_params->def_decomp_xform.decompress.window_size = DEFAULT_WINDOW_SIZE;
+
+ return TEST_SUCCESS;
+
+exit:
+ testsuite_teardown();
+
+ return TEST_FAILED;
+}
+
+static int
+generic_ut_setup(void)
+{
+ /* Configure compressdev (one device, one queue pair) */
+ struct rte_compressdev_config config = {
+ .socket_id = rte_socket_id(),
+ .nb_queue_pairs = 1,
+ .max_nb_priv_xforms = NUM_MAX_XFORMS,
+ .max_nb_streams = 0
+ };
+
+ if (rte_compressdev_configure(0, &config) < 0) {
+ RTE_LOG(ERR, USER1, "Device configuration failed\n");
+ return -1;
+ }
+
+ if (rte_compressdev_queue_pair_setup(0, 0, NUM_MAX_INFLIGHT_OPS,
+ rte_socket_id()) < 0) {
+ RTE_LOG(ERR, USER1, "Queue pair setup failed\n");
+ return -1;
+ }
+
+ if (rte_compressdev_start(0) < 0) {
+ RTE_LOG(ERR, USER1, "Device could not be started\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static void
+generic_ut_teardown(void)
+{
+ rte_compressdev_stop(0);
+ if (rte_compressdev_close(0) < 0)
+ RTE_LOG(ERR, USER1, "Device could not be closed\n");
+}
+
+static int
+compare_buffers(const char *buffer1, uint32_t buffer1_len,
+ const char *buffer2, uint32_t buffer2_len)
+{
+ if (buffer1_len != buffer2_len) {
+ RTE_LOG(ERR, USER1, "Buffer lengths are different\n");
+ return -1;
+ }
+
+ if (memcmp(buffer1, buffer2, buffer1_len) != 0) {
+ RTE_LOG(ERR, USER1, "Buffers are different\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * Maps compressdev and Zlib flush flags
+ */
+static int
+map_zlib_flush_flag(enum rte_comp_flush_flag flag)
+{
+ switch (flag) {
+ case RTE_COMP_FLUSH_NONE:
+ return Z_NO_FLUSH;
+ case RTE_COMP_FLUSH_SYNC:
+ return Z_SYNC_FLUSH;
+ case RTE_COMP_FLUSH_FULL:
+ return Z_FULL_FLUSH;
+ case RTE_COMP_FLUSH_FINAL:
+ return Z_FINISH;
+ /*
+ * There should be only the values above,
+ * so this should never happen
+ */
+ default:
+ return -1;
+ }
+}
+
+static int
+compress_zlib(struct rte_comp_op *op,
+ const struct rte_comp_xform *xform, int mem_level)
+{
+ z_stream stream;
+ int zlib_flush;
+ int strategy, window_bits, comp_level;
+ int ret = -1;
+
+ /* initialize zlib stream */
+ stream.zalloc = Z_NULL;
+ stream.zfree = Z_NULL;
+ stream.opaque = Z_NULL;
+
+ if (xform->compress.deflate.huffman == RTE_COMP_HUFFMAN_FIXED)
+ strategy = Z_FIXED;
+ else
+ strategy = Z_DEFAULT_STRATEGY;
+
+ /*
+ * Window bits is the base two logarithm of the window size (in bytes).
+ * When doing raw DEFLATE, this number will be negative.
+ */
+ window_bits = -(xform->compress.window_size);
+
+ comp_level = xform->compress.level;
+
+ if (comp_level != RTE_COMP_LEVEL_NONE)
+ ret = deflateInit2(&stream, comp_level, Z_DEFLATED,
+ window_bits, mem_level, strategy);
+ else
+ ret = deflateInit(&stream, Z_NO_COMPRESSION);
+
+ if (ret != Z_OK) {
+ printf("Zlib deflate could not be initialized\n");
+ goto exit;
+ }
+
+ /* Assuming stateless operation */
+ stream.avail_in = op->src.length;
+ stream.next_in = rte_pktmbuf_mtod(op->m_src, uint8_t *);
+ stream.avail_out = op->m_dst->data_len;
+ stream.next_out = rte_pktmbuf_mtod(op->m_dst, uint8_t *);
+
+ /* Stateless operation, all buffer will be compressed in one go */
+ zlib_flush = map_zlib_flush_flag(op->flush_flag);
+ ret = deflate(&stream, zlib_flush);
+
+ if (stream.avail_in != 0) {
+ RTE_LOG(ERR, USER1, "Buffer could not be read entirely\n");
+ goto exit;
+ }
+
+ //TODO: This is only if flush final is used
+ if (ret != Z_STREAM_END)
+ goto exit;
+
+ op->consumed = op->src.length - stream.avail_in;
+ op->produced = op->m_dst->data_len - stream.avail_out;
+ op->status = RTE_COMP_OP_STATUS_SUCCESS;
+
+ deflateReset(&stream);
+
+ ret = 0;
+exit:
+ deflateEnd(&stream);
+
+ return ret;
+}
+
+static int
+decompress_zlib(struct rte_comp_op *op,
+ const struct rte_comp_xform *xform)
+{
+ z_stream stream;
+ int window_bits;
+ int zlib_flush;
+ int ret = TEST_FAILED;
+
+ /* initialize zlib stream */
+ stream.zalloc = Z_NULL;
+ stream.zfree = Z_NULL;
+ stream.opaque = Z_NULL;
+
+ /*
+ * Window bits is the base two logarithm of the window size (in bytes).
+ * When doing raw DEFLATE, this number will be negative.
+ */
+ window_bits = -(xform->decompress.window_size);
+
+ ret = inflateInit2(&stream, window_bits);
+
+ if (ret != Z_OK) {
+ printf("Zlib deflate could not be initialized\n");
+ goto exit;
+ }
+
+ /* Assuming stateless operation */
+ stream.avail_in = op->src.length;
+ stream.next_in = rte_pktmbuf_mtod(op->m_src, uint8_t *);
+ stream.avail_out = op->m_dst->data_len;
+ stream.next_out = rte_pktmbuf_mtod(op->m_dst, uint8_t *);
+
+ /* Stateless operation, all buffer will be compressed in one go */
+ zlib_flush = map_zlib_flush_flag(op->flush_flag);
+ ret = inflate(&stream, zlib_flush);
+
+ if (stream.avail_in != 0) {
+ RTE_LOG(ERR, USER1, "Buffer could not be read entirely\n");
+ goto exit;
+ }
+
+ //TODO: This is only if flush final is used
+ if (ret != Z_STREAM_END)
+ goto exit;
+
+ op->consumed = op->src.length - stream.avail_in;
+ op->produced = op->m_dst->data_len - stream.avail_out;
+ op->status = RTE_COMP_OP_STATUS_SUCCESS;
+
+ inflateReset(&stream);
+
+ ret = 0;
+exit:
+ inflateEnd(&stream);
+
+ return ret;
+}
+
+/*
+ * Compresses and decompresses buffer with compressdev API and Zlib API
+ */
+static int
+test_deflate_comp_decomp(const char *test_buffer,
+ struct rte_comp_xform *compress_xform,
+ struct rte_comp_xform *decompress_xform,
+ enum rte_comp_op_type state,
+ enum zlib_direction zlib_dir)
+{
+ struct comp_testsuite_params *ts_params = &testsuite_params;
+ int ret_status = -1;
+ int ret;
+ struct rte_mbuf *comp_buf = NULL;
+ struct rte_mbuf *uncomp_buf = NULL;
+ struct rte_comp_op *op = NULL;
+ struct rte_comp_op *op_processed = NULL;
+ void *priv_xform = NULL;
+ uint16_t num_deqd;
+ unsigned int deqd_retries = 0;
+ char *data_ptr;
+
+ /* Prepare the source mbuf with the data */
+ uncomp_buf = rte_pktmbuf_alloc(ts_params->mbuf_pool);
+ if (uncomp_buf == NULL) {
+ RTE_LOG(ERR, USER1,
+ "Source mbuf could not be allocated "
+ "from the mempool\n");
+ goto exit;
+ }
+
+ data_ptr = rte_pktmbuf_append(uncomp_buf, strlen(test_buffer) + 1);
+ snprintf(data_ptr, strlen(test_buffer) + 1, "%s", test_buffer);
+
+ /* Prepare the destination mbuf */
+ comp_buf = rte_pktmbuf_alloc(ts_params->mbuf_pool);
+ if (comp_buf == NULL) {
+ RTE_LOG(ERR, USER1,
+ "Destination mbuf could not be allocated "
+ "from the mempool\n");
+ goto exit;
+ }
+
+ rte_pktmbuf_append(comp_buf,
+ strlen(test_buffer) * COMPRESS_BUF_SIZE_RATIO);
+
+ /* Build the compression operations */
+ op = rte_comp_op_alloc(ts_params->op_pool);
+ if (op == NULL) {
+ RTE_LOG(ERR, USER1,
+ "Compress operation could not be allocated "
+ "from the mempool\n");
+ goto exit;
+ }
+
+ op->m_src = uncomp_buf;
+ op->m_dst = comp_buf;
+ op->src.offset = 0;
+ op->src.length = rte_pktmbuf_pkt_len(uncomp_buf);
+ op->dst.offset = 0;
+ if (state == RTE_COMP_OP_STATELESS) {
+ //TODO: FULL or FINAL?
+ op->flush_flag = RTE_COMP_FLUSH_FINAL;
+ } else {
+ RTE_LOG(ERR, USER1,
+ "Stateful operations are not supported "
+ "in these tests yet\n");
+ goto exit;
+ }
+ op->input_chksum = 0;
+
+ /* Compress data (either with Zlib API or compressdev API */
+ if (zlib_dir == ZLIB_COMPRESS || zlib_dir == ZLIB_ALL) {
+ ret = compress_zlib(op,
+ (const struct rte_comp_xform *)&compress_xform,
+ DEFAULT_MEM_LEVEL);
+ if (ret < 0)
+ goto exit;
+
+ op_processed = op;
+ } else {
+ /* Create compress xform private data */
+ ret = rte_compressdev_private_xform_create(0,
+ (const struct rte_comp_xform *)compress_xform,
+ &priv_xform);
+ if (ret < 0) {
+ RTE_LOG(ERR, USER1,
+ "Compression private xform "
+ "could not be created\n");
+ goto exit;
+ }
+
+ /* Attach xform private data to operation */
+ op->private_xform = priv_xform;
+
+ /* Enqueue and dequeue all operations */
+ ret = rte_compressdev_enqueue_burst(0, 0, &op, 1);
+ if (ret == 0) {
+ RTE_LOG(ERR, USER1,
+ "The operation could not be enqueued\n");
+ goto exit;
+ }
+ do {
+ /*
+ * If retrying a dequeue call, wait for 10 ms to allow
+ * enough time to the driver to process the operations
+ */
+ if (deqd_retries != 0) {
+ /*
+ * Avoid infinite loop if not all the
+ * operations get out of the device
+ */
+ if (deqd_retries == MAX_DEQD_RETRIES) {
+ RTE_LOG(ERR, USER1,
+ "Not all operations could be "
+ "dequeued\n");
+ goto exit;
+ }
+ usleep(DEQUEUE_WAIT_TIME);
+ }
+ num_deqd = rte_compressdev_dequeue_burst(0, 0,
+ &op_processed, 1);
+
+ deqd_retries++;
+ } while (num_deqd < 1);
+
+ deqd_retries = 0;
+
+ /* Free compress private xform */
+ rte_compressdev_private_xform_free(0, priv_xform);
+ priv_xform = NULL;
+ }
+
+ enum rte_comp_huffman huffman_type =
+ compress_xform->compress.deflate.huffman;
+ RTE_LOG(DEBUG, USER1, "Buffer compressed from %u to %u bytes "
+ "(level = %u, huffman = %s)\n",
+ op_processed->consumed, op_processed->produced,
+ compress_xform->compress.level,
+ huffman_type_strings[huffman_type]);
+ RTE_LOG(DEBUG, USER1, "Compression ratio = %.2f",
+ (float)op_processed->produced /
+ op_processed->consumed * 100);
+ op = NULL;
+
+ /*
+ * Check operation status and free source mbuf (destination mbuf and
+ * compress operation information is needed for the decompression stage)
+ */
+ if (op_processed->status != RTE_COMP_OP_STATUS_SUCCESS) {
+ RTE_LOG(ERR, USER1,
+ "Some operations were not successful\n");
+ goto exit;
+ }
+ rte_pktmbuf_free(uncomp_buf);
+ uncomp_buf = NULL;
+
+ /* Allocate buffer for decompressed data */
+ uncomp_buf = rte_pktmbuf_alloc(ts_params->mbuf_pool);
+ if (uncomp_buf == NULL) {
+ RTE_LOG(ERR, USER1,
+ "Destination mbuf could not be allocated "
+ "from the mempool\n");
+ goto exit;
+ }
+
+ rte_pktmbuf_append(uncomp_buf, strlen(test_buffer) + 1);
+
+ /* Build the decompression operations */
+ op = rte_comp_op_alloc(ts_params->op_pool);
+ if (op == NULL) {
+ RTE_LOG(ERR, USER1,
+ "Decompress operation could not be allocated "
+ "from the mempool\n");
+ goto exit;
+ }
+
+ /* Source buffer is the compressed data from the previous operation */
+ op->m_src = op_processed->m_dst;
+ op->m_dst = uncomp_buf;
+ op->src.offset = 0;
+ /*
+ * Set the length of the compressed data to the
+ * number of bytes that were produced in the previous stage
+ */
+ op->src.length = op_processed->produced;
+ op->dst.offset = 0;
+ if (state == RTE_COMP_OP_STATELESS) {
+ //TODO: FULL or FINAL?
+ op->flush_flag = RTE_COMP_FLUSH_FINAL;
+ } else {
+ RTE_LOG(ERR, USER1,
+ "Stateful operations are not supported "
+ "in these tests yet\n");
+ goto exit;
+ }
+ op->input_chksum = 0;
+
+ /*
+ * Free the previous compress operation,
+ * as it is not needed anymore
+ */
+ rte_comp_op_free(op_processed);
+ op_processed = NULL;
+
+ /* Decompress data (either with Zlib API or compressdev API */
+ if (zlib_dir == ZLIB_DECOMPRESS || zlib_dir == ZLIB_ALL) {
+ ret = decompress_zlib(op,
+ (const struct rte_comp_xform *)&decompress_xform);
+ if (ret < 0)
+ goto exit;
+
+ op_processed = op;
+ } else {
+ num_deqd = 0;
+ /* Create decompress xform private data */
+ ret = rte_compressdev_private_xform_create(0,
+ (const struct rte_comp_xform *)decompress_xform,
+ &priv_xform);
+ if (ret < 0) {
+ RTE_LOG(ERR, USER1,
+ "Decompression private xform "
+ "could not be created\n");
+ goto exit;
+ }
+
+ /* Attach xform private data to operation */
+ op->private_xform = priv_xform;
+
+ /* Enqueue and dequeue all operations */
+ ret = rte_compressdev_enqueue_burst(0, 0, &op, 1);
+ if (ret == 0) {
+ RTE_LOG(ERR, USER1,
+ "The operation could not be enqueued\n");
+ goto exit;
+ }
+ do {
+ /*
+ * If retrying a dequeue call, wait for 10 ms to allow
+ * enough time to the driver to process the operations
+ */
+ if (deqd_retries != 0) {
+ /*
+ * Avoid infinite loop if not all the
+ * operations get out of the device
+ */
+ if (deqd_retries == MAX_DEQD_RETRIES) {
+ RTE_LOG(ERR, USER1,
+ "Not all operations could be "
+ "dequeued\n");
+ goto exit;
+ }
+ usleep(DEQUEUE_WAIT_TIME);
+ }
+ num_deqd = rte_compressdev_dequeue_burst(0, 0,
+ &op_processed, 1);
+
+ deqd_retries++;
+ } while (num_deqd < 1);
+ }
+
+ RTE_LOG(DEBUG, USER1, "Buffer decompressed from %u to %u bytes\n",
+ op_processed->consumed, op_processed->produced);
+ op = NULL;
+ /*
+ * Check operation status and free source mbuf (destination mbuf and
+ * compress operation information is still needed)
+ */
+ if (op_processed->status != RTE_COMP_OP_STATUS_SUCCESS) {
+ RTE_LOG(ERR, USER1,
+ "Some operations were not successful\n");
+ goto exit;
+ }
+ rte_pktmbuf_free(comp_buf);
+ comp_buf = NULL;
+
+ /*
+ * Compare the original stream with the decompressed stream
+ * (in size and the data)
+ */
+ if (compare_buffers(test_buffer, strlen(test_buffer) + 1,
+ rte_pktmbuf_mtod(op_processed->m_dst, const char *),
+ op_processed->produced) < 0)
+ goto exit;
+
+ ret_status = 0;
+
+exit:
+ /* Free resources */
+ rte_pktmbuf_free(uncomp_buf);
+ rte_pktmbuf_free(comp_buf);
+ rte_comp_op_free(op);
+ rte_comp_op_free(op_processed);
+
+ if (priv_xform != NULL)
+ rte_compressdev_private_xform_free(0, priv_xform);
+
+ return ret_status;
+}
+
+static int
+test_compressdev_deflate_stateless_fixed(void)
+{
+ struct comp_testsuite_params *ts_params = &testsuite_params;
+ const char *test_buffer;
+ uint16_t i;
+ struct rte_comp_xform compress_xform;
+
+ memcpy(&compress_xform, &ts_params->def_comp_xform,
+ sizeof(struct rte_comp_xform));
+ compress_xform.compress.deflate.huffman = RTE_COMP_HUFFMAN_FIXED;
+
+ for (i = 0; i < RTE_DIM(compress_test_bufs); i++) {
+ test_buffer = compress_test_bufs[i];
+
+ /* Compress with compressdev, decompress with Zlib */
+ if (test_deflate_comp_decomp(test_buffer,
+ &compress_xform,
+ &ts_params->def_decomp_xform,
+ RTE_COMP_OP_STATELESS,
+ ZLIB_DECOMPRESS) < 0)
+ return TEST_FAILED;
+
+ /* Compress with Zlib, decompress with compressdev */
+ if (test_deflate_comp_decomp(test_buffer,
+ &compress_xform,
+ &ts_params->def_decomp_xform,
+ RTE_COMP_OP_STATELESS,
+ ZLIB_COMPRESS) < 0)
+ return TEST_FAILED;
+ }
+
+ return TEST_SUCCESS;
+}
+
+static int
+test_compressdev_deflate_stateless_dynamic(void)
+{
+ struct comp_testsuite_params *ts_params = &testsuite_params;
+ const char *test_buffer;
+ uint16_t i;
+ struct rte_comp_xform compress_xform;
+
+ memcpy(&compress_xform, &ts_params->def_comp_xform,
+ sizeof(struct rte_comp_xform));
+ compress_xform.compress.deflate.huffman = RTE_COMP_HUFFMAN_DYNAMIC;
+
+ for (i = 0; i < RTE_DIM(compress_test_bufs); i++) {
+ test_buffer = compress_test_bufs[i];
+
+ /* Compress with compressdev, decompress with Zlib */
+ if (test_deflate_comp_decomp(test_buffer,
+ &compress_xform,
+ &ts_params->def_decomp_xform,
+ RTE_COMP_OP_STATELESS,
+ ZLIB_DECOMPRESS) < 0)
+ return TEST_FAILED;
+
+ /* Compress with Zlib, decompress with compressdev */
+ if (test_deflate_comp_decomp(test_buffer,
+ &compress_xform,
+ &ts_params->def_decomp_xform,
+ RTE_COMP_OP_STATELESS,
+ ZLIB_COMPRESS) < 0)
+ return TEST_FAILED;
+ }
+
+ return TEST_SUCCESS;
+}
+
+static struct unit_test_suite compressdev_testsuite = {
+ .suite_name = "compressdev unit test suite",
+ .setup = testsuite_setup,
+ .teardown = testsuite_teardown,
+ .unit_test_cases = {
+ TEST_CASE_ST(generic_ut_setup, generic_ut_teardown,
+ test_compressdev_deflate_stateless_fixed),
+ TEST_CASE_ST(generic_ut_setup, generic_ut_teardown,
+ test_compressdev_deflate_stateless_dynamic),
+ TEST_CASES_END() /**< NULL terminate unit test array */
+ }
+};
+
+static int
+test_compressdev(void)
+{
+ return unit_test_suite_runner(&compressdev_testsuite);
+}
+
+REGISTER_TEST_COMMAND(compressdev_autotest, test_compressdev);
diff --git a/test/test/test_compressdev_test_buffer.h b/test/test/test_compressdev_test_buffer.h
new file mode 100644
index 000000000..c0492f89a
--- /dev/null
+++ b/test/test/test_compressdev_test_buffer.h
@@ -0,0 +1,295 @@
+#ifndef TEST_COMPRESSDEV_TEST_BUFFERS_H_
+#define TEST_COMPRESSDEV_TEST_BUFFERS_H_
+
+/*
+ * These test buffers are snippets obtained
+ * from the Canterbury and Calgary Corpus
+ * collection.
+ */
+
+/* Snippet of Alice's Adventures in Wonderland */
+static const char test_buf_alice[] =
+ " Alice was beginning to get very tired of sitting by her sister\n"
+ "on the bank, and of having nothing to do: once or twice she had\n"
+ "peeped into the book her sister was reading, but it had no\n"
+ "pictures or conversations in it, `and what is the use of a book,'\n"
+ "thought Alice `without pictures or conversation?'\n\n"
+ " So she was considering in her own mind (as well as she could,\n"
+ "for the hot day made her feel very sleepy and stupid), whether\n"
+ "the pleasure of making a daisy-chain would be worth the trouble\n"
+ "of getting up and picking the daisies, when suddenly a White\n"
+ "Rabbit with pink eyes ran close by her.\n\n"
+ " There was nothing so VERY remarkable in that; nor did Alice\n"
+ "think it so VERY much out of the way to hear the Rabbit say to\n"
+ "itself, `Oh dear! Oh dear! I shall be late!' (when she thought\n"
+ "it over afterwards, it occurred to her that she ought to have\n"
+ "wondered at this, but at the time it all seemed quite natural);\n"
+ "but when the Rabbit actually TOOK A WATCH OUT OF ITS WAISTCOAT-\n"
+ "POCKET, and looked at it, and then hurried on, Alice started to\n"
+ "her feet, for it flashed across her mind that she had never\n"
+ "before seen a rabbit with either a waistcoat-pocket, or a watch to\n"
+ "take out of it, and burning with curiosity, she ran across the\n"
+ "field after it, and fortunately was just in time to see it pop\n"
+ "down a large rabbit-hole under the hedge.\n\n"
+ " In another moment down went Alice after it, never once\n"
+ "considering how in the world she was to get out again.\n\n"
+ " The rabbit-hole went straight on like a tunnel for some way,\n"
+ "and then dipped suddenly down, so suddenly that Alice had not a\n"
+ "moment to think about stopping herself before she found herself\n"
+ "falling down a very deep well.\n\n"
+ " Either the well was very deep, or she fell very slowly, for she\n"
+ "had plenty of time as she went down to look about her and to\n"
+ "wonder what was going to happen next. First, she tried to look\n"
+ "down and make out what she was coming to, but it was too dark to\n"
+ "see anything; then she looked at the sides of the well, and\n"
+ "noticed that they were filled with cupboards and book-shelves;\n"
+ "here and there she saw maps and pictures hung upon pegs. She\n"
+ "took down a jar from one of the shelves as she passed; it was\n"
+ "labelled `ORANGE MARMALADE', but to her great disappointment it\n"
+ "was empty: she did not like to drop the jar for fear of killing\n"
+ "somebody, so managed to put it into one of the cupboards as she\n"
+ "fell past it.\n\n"
+ " `Well!' thought Alice to herself, `after such a fall as this, I\n"
+ "shall think nothing of tumbling down stairs! How brave they'll\n"
+ "all think me at home! Why, I wouldn't say anything about it,\n"
+ "even if I fell off the top of the house!' (Which was very likely\n"
+ "true.)\n\n"
+ " Down, down, down. Would the fall NEVER come to an end! `I\n"
+ "wonder how many miles I've fallen by this time?' she said aloud.\n"
+ "`I must be getting somewhere near the centre of the earth. Let\n"
+ "me see: that would be four thousand miles down, I think--' (for,\n"
+ "you see, Alice had learnt several things of this sort in her\n"
+ "lessons in the schoolroom, and though this was not a VERY good\n"
+ "opportunity for showing off her knowledge, as there was no one to\n"
+ "listen to her, still it was good practice to say it over) `--yes,\n"
+ "that's about the right distance--but then I wonder what Latitude\n"
+ "or Longitude I've got to?' (Alice had no idea what Latitude was,\n"
+ "or Longitude either, but thought they were nice grand words to\n"
+ "say.)\n\n"
+ " Presently she began again. `I wonder if I shall fall right\n"
+ "THROUGH the earth! How funny it'll seem to come out among the\n"
+ "people that walk with their heads downward! The Antipathies, I\n"
+ "think--' (she was rather glad there WAS no one listening, this\n"
+ "time, as it didn't sound at all the right word) `--but I shall\n"
+ "have to ask them what the name of the country is, you know.\n"
+ "Please, Ma'am, is this New Zealand or Australia?' (and she tried\n"
+ "to curtsey as she spoke--fancy CURTSEYING as you're falling\n"
+ "through the air! Do you think you could manage it?) `And what\n"
+ "an ignorant little girl she'll think me for asking! No, it'll\n"
+ "never do to ask: perhaps I shall see it written up somewhere.'\n"
+ " Down, down, down. There was nothing else to do, so Alice soon\n"
+ "began talking again. `Dinah'll miss me very much to-night, I\n"
+ "should think!' (Dinah was the cat.) `I hope they'll remember\n"
+ "her saucer of milk at tea-time. Dinah my dear! I wish you were\n"
+ "down here with me! There are no mice in the air, I'm afraid, but\n"
+ "you might catch a bat, and that's very like a mouse, you know.\n"
+ "But do cats eat bats, I wonder?' And here Alice began to get\n"
+ "rather sleepy, and went on saying to herself, in a dreamy sort of\n"
+ "way, `Do cats eat bats? Do cats eat bats?' and sometimes, `Do\n"
+ "bats eat cats?' for, you see, as she couldn't answer either\n"
+ "question, it didn't much matter which way she put it. She felt\n"
+ "that she was dozing off, and had just begun to dream that she\n"
+ "was walking hand in hand with Dinah, and saying to her very\n"
+ "earnestly, `Now, Dinah, tell me the truth: did you ever eat a\n"
+ "bat?' when suddenly, thump! thump! down she came upon a heap of\n"
+ "sticks and dry leaves, and the fall was over.\n\n";
+
+/* Snippet of Shakespeare play */
+static const char test_buf_shakespeare[] =
+ "CHARLES wrestler to Frederick.\n"
+ "\n"
+ "\n"
+ "OLIVER |\n"
+ " |\n"
+ "JAQUES (JAQUES DE BOYS:) | sons of Sir Rowland de Boys.\n"
+ " |\n"
+ "ORLANDO |\n"
+ "\n"
+ "\n"
+ "ADAM |\n"
+ " | servants to Oliver.\n"
+ "DENNIS |\n"
+ "\n"
+ "\n"
+ "TOUCHSTONE a clown.\n"
+ "\n"
+ "SIR OLIVER MARTEXT a vicar.\n"
+ "\n"
+ "\n"
+ "CORIN |\n"
+ " | shepherds.\n"
+ "SILVIUS |\n"
+ "\n"
+ "\n"
+ "WILLIAM a country fellow in love with Audrey.\n"
+ "\n"
+ " A person representing HYMEN. (HYMEN:)\n"
+ "\n"
+ "ROSALIND daughter to the banished duke.\n"
+ "\n"
+ "CELIA daughter to Frederick.\n"
+ "\n"
+ "PHEBE a shepherdess.\n"
+ "\n"
+ "AUDREY a country wench.\n"
+ "\n"
+ " Lords, pages, and attendants, &c.\n"
+ " (Forester:)\n"
+ " (A Lord:)\n"
+ " (First Lord:)\n"
+ " (Second Lord:)\n"
+ " (First Page:)\n"
+ " (Second Page:)\n"
+ "\n"
+ "\n"
+ "SCENE Oliver's house; Duke Frederick's court; and the\n"
+ " Forest of Arden.\n"
+ "\n"
+ "\n"
+ "\n"
+ "\n"
+ " AS YOU LIKE IT\n"
+ "\n"
+ "\n"
+ "ACT I\n"
+ "\n"
+ "\n"
+ "\n"
+ "SCENE I Orchard of Oliver's house.\n"
+ "\n"
+ "\n"
+ " [Enter ORLANDO and ADAM]\n"
+ "\n"
+ "ORLANDO As I remember, Adam, it was upon this fashion\n"
+ " bequeathed me by will but poor a thousand crowns,\n"
+ " and, as thou sayest, charged my brother, on his\n"
+ " blessing, to breed me well: and there begins my\n"
+ " sadness. My brother Jaques he keeps at school, and\n"
+ " report speaks goldenly of his profit: for my part,\n"
+ " he keeps me rustically at home, or, to speak more\n"
+ " properly, stays me here at home unkept; for call you\n"
+ " that keeping for a gentleman of my birth, that\n"
+ " differs not from the stalling of an ox? His horses\n"
+ " are bred better; for, besides that they are fair\n"
+ " with their feeding, they are taught their manage,\n"
+ " and to that end riders dearly hired: but I, his\n"
+ " brother, gain nothing under him but growth; for the\n"
+ " which his animals on his dunghills are as much\n"
+ " bound to him as I. Besides this nothing that he so\n"
+ " plentifully gives me, the something that nature gave\n"
+ " me his countenance seems to take from me: he lets\n"
+ " me feed with his hinds, bars me the place of a\n"
+ " brother, and, as much as in him lies, mines my\n"
+ " gentility with my education. This is it, Adam, that\n"
+ " grieves me; and the spirit of my father, which I\n"
+ " think is within me, begins to mutiny against this\n"
+ " servitude: I will no longer endure it, though yet I\n"
+ " know no wise remedy how to avoid it.\n"
+ "\n"
+ "ADAM Yonder comes my master, your brother.\n"
+ "\n"
+ "ORLANDO Go apart, Adam, and thou shalt hear how he will\n";
+
+/* Snippet of source code in Pascal */
+static const char test_buf_pascal[] =
+ " Ptr = 1..DMem;\n"
+ " Loc = 1..IMem;\n"
+ " Loc0 = 0..IMem;\n"
+ " EdgeT = (hout,lin,hin,lout); {Warning this order is important in}\n"
+ " {predicates such as gtS,geS}\n"
+ " CardT = (finite,infinite);\n"
+ " ExpT = Minexp..Maxexp;\n"
+ " ManT = Mininf..Maxinf; \n"
+ " Pflag = (PNull,PSoln,PTrace,PPrint);\n"
+ " Sreal = record\n"
+ " edge:EdgeT;\n"
+ " cardinality:CardT;\n"
+ " exp:ExpT; {exponent}\n"
+ " mantissa:ManT;\n"
+ " end;\n"
+ " Int = record\n"
+ " hi:Sreal;\n"
+ " lo:Sreal;\n"
+ " end;\n"
+ " Instr = record\n"
+ " Code:OpType;\n"
+ " Pars: array[0..Par] of 0..DMem;\n"
+ " end;\n"
+ " DataMem= record\n"
+ " D :array [Ptr] of Int;\n"
+ " S :array [Loc] of State;\n"
+ " LastHalve:Loc;\n"
+ " RHalve :array [Loc] of real;\n"
+ " end;\n"
+ " DataFlags=record\n"
+ " PF :array [Ptr] of Pflag;\n"
+ " end;\n"
+ "var\n"
+ " Debug : (none,activity,post,trace,dump);\n"
+ " Cut : (once,all);\n"
+ " GlobalEnd,Verifiable:boolean;\n"
+ " HalveThreshold:real;\n"
+ " I : array [Loc] of Instr; {Memory holding instructions}\n"
+ " End : Loc; {last instruction in I}\n"
+ " ParN : array [OpType] of -1..Par; {number of parameters for each \n"
+ " opcode. -1 means no result}\n"
+ " ParIntersect : array [OpType] of boolean ;\n"
+ " DInit : DataMem; {initial memory which is cleared and \n"
+ " used in first call}\n"
+ " DF : DataFlags; {hold flags for variables, e.g. print/trace}\n"
+ " MaxDMem:0..DMem;\n"
+ " Shift : array[0..Digits] of 1..maxint;{array of constant multipliers}\n"
+ " {used for alignment etc.}\n"
+ " Dummy :Positive;\n"
+ " {constant intervals and Sreals}\n"
+ " PlusInfS,MinusInfS,PlusSmallS,MinusSmallS,ZeroS,\n"
+ " PlusFiniteS,MinusFiniteS:Sreal;\n"
+ " Zero,All,AllFinite:Int;\n"
+ "\n"
+ "procedure deblank;\n"
+ "var Ch:char;\n"
+ "begin\n"
+ " while (not eof) and (input^ in [' ',' ']) do read(Ch);\n"
+ "end;\n"
+ "\n"
+ "procedure InitialOptions;\n"
+ "\n"
+ "#include '/user/profs/cleary/bin/options.i';\n"
+ "\n"
+ " procedure Option;\n"
+ " begin\n"
+ " case Opt of\n"
+ " 'a','A':Debug:=activity;\n"
+ " 'd','D':Debug:=dump;\n"
+ " 'h','H':HalveThreshold:=StringNum/100;\n"
+ " 'n','N':Debug:=none;\n"
+ " 'p','P':Debug:=post;\n"
+ " 't','T':Debug:=trace;\n"
+ " 'v','V':Verifiable:=true;\n"
+ " end;\n"
+ " end;\n"
+ "\n"
+ "begin\n"
+ " Debug:=trace;\n"
+ " Verifiable:=false;\n"
+ " HalveThreshold:=67/100;\n"
+ " Options;\n"
+ " writeln(Debug);\n"
+ " writeln('Verifiable:',Verifiable);\n"
+ " writeln('Halve threshold',HalveThreshold);\n"
+ "end;{InitialOptions}\n"
+ "\n"
+ "procedure NormalizeUp(E,M:integer;var S:Sreal;var Closed:boolean);\n"
+ "begin\n"
+ "with S do\n"
+ "begin\n"
+ " if M=0 then S:=ZeroS else\n"
+ " if M>0 then\n";
+
+static const char * const compress_test_bufs[] = {
+ test_buf_alice,
+ test_buf_shakespeare,
+ test_buf_pascal
+};
+
+#endif /* TEST_COMPRESSDEV_TEST_BUFFERS_H_ */
--
2.17.0
next prev parent reply other threads:[~2018-05-04 10:22 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-28 14:00 [dpdk-dev] [PATCH 0/5] Initial compressdev " Pablo de Lara
2018-02-28 14:00 ` [dpdk-dev] [PATCH 1/5] compressdev: add const for xform in session init Pablo de Lara
2018-02-28 14:00 ` [dpdk-dev] [PATCH 2/5] test/compress: add initial unit tests Pablo de Lara
2018-02-28 14:00 ` [dpdk-dev] [PATCH 3/5] test/compress: add multi op test Pablo de Lara
2018-02-28 14:00 ` [dpdk-dev] [PATCH 4/5] test/compress: add multi level test Pablo de Lara
2018-02-28 14:00 ` [dpdk-dev] [PATCH 5/5] test/compress: add multi session test Pablo de Lara
2018-04-08 14:00 ` [dpdk-dev] [PATCH v2 0/5] Initial compressdev unit tests Pablo de Lara
2018-04-08 14:00 ` [dpdk-dev] [PATCH v2 1/5] test/compress: add initial " Pablo de Lara
2018-04-08 14:00 ` [dpdk-dev] [PATCH v2 2/5] test/compress: add multi op test Pablo de Lara
2018-04-08 14:00 ` [dpdk-dev] [PATCH v2 3/5] test/compress: add multi level test Pablo de Lara
2018-04-08 14:00 ` [dpdk-dev] [PATCH v2 4/5] test/compress: add multi xform test Pablo de Lara
2018-04-08 14:00 ` [dpdk-dev] [PATCH v2 5/5] test/compress: add invalid configuration tests Pablo de Lara
2018-04-27 14:14 ` [dpdk-dev] [PATCH v3 0/5] Initial compressdev unit tests Pablo de Lara
2018-04-27 14:14 ` [dpdk-dev] [PATCH v3 1/5] test/compress: add initial " Pablo de Lara
2018-05-02 13:44 ` Daly, Lee
2018-05-04 8:49 ` De Lara Guarch, Pablo
2018-04-27 14:14 ` [dpdk-dev] [PATCH v3 2/5] test/compress: add multi op test Pablo de Lara
2018-04-27 14:15 ` [dpdk-dev] [PATCH v3 3/5] test/compress: add multi level test Pablo de Lara
2018-04-27 14:15 ` [dpdk-dev] [PATCH v3 4/5] test/compress: add multi xform test Pablo de Lara
2018-05-02 13:49 ` Daly, Lee
2018-04-27 14:15 ` [dpdk-dev] [PATCH v3 5/5] test/compress: add invalid configuration tests Pablo de Lara
2018-05-01 13:00 ` [dpdk-dev] [PATCH v3 0/5] Initial compressdev unit tests Daly, Lee
2018-05-04 10:22 ` [dpdk-dev] [PATCH v4 " Pablo de Lara
2018-05-04 10:22 ` Pablo de Lara [this message]
2018-05-14 8:29 ` [dpdk-dev] [PATCH v4 1/5] test/compress: add initial " Verma, Shally
2018-05-14 8:40 ` De Lara Guarch, Pablo
2018-05-04 10:22 ` [dpdk-dev] [PATCH v4 2/5] test/compress: add multi op test Pablo de Lara
2018-05-04 10:22 ` [dpdk-dev] [PATCH v4 3/5] test/compress: add multi level test Pablo de Lara
2018-05-04 10:22 ` [dpdk-dev] [PATCH v4 4/5] test/compress: add multi xform test Pablo de Lara
2018-05-04 10:22 ` [dpdk-dev] [PATCH v4 5/5] test/compress: add invalid configuration tests Pablo de Lara
2018-05-08 15:47 ` [dpdk-dev] [PATCH v4 0/5] Initial compressdev unit tests Trahe, Fiona
2018-05-08 21:26 ` De Lara Guarch, Pablo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180504102218.30672-2-pablo.de.lara.guarch@intel.com \
--to=pablo.de.lara.guarch@intel.com \
--cc=Ashish.Gupta@cavium.com \
--cc=ahmed.mansour@nxp.com \
--cc=ashish.gupta@caviumnetworks.com \
--cc=dev@dpdk.org \
--cc=fiona.trahe@intel.com \
--cc=lee.daly@intel.com \
--cc=shally.verma@cavium.com \
--cc=shally.verma@caviumnetworks.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).