From: Jerin Jacob <jerin.jacob@caviumnetworks.com>
To: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Cc: hemant.agrawal@nxp.com, akhil.goyal@nxp.com, dev@dpdk.org,
narender.vangati@intel.com, nikhil.rao@intel.com,
gage.eads@intel.com
Subject: Re: [dpdk-dev] [v3,4/5] test: add event crypto adapter auto-test
Date: Mon, 7 May 2018 10:50:54 +0530 [thread overview]
Message-ID: <20180507052053.GA25735@jerin> (raw)
In-Reply-To: <1525546030-11204-5-git-send-email-abhinandan.gujjar@intel.com>
-----Original Message-----
> Date: Sun, 6 May 2018 00:17:09 +0530
> From: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
> To: jerin.jacob@caviumnetworks.com, hemant.agrawal@nxp.com,
> akhil.goyal@nxp.com, dev@dpdk.org
> CC: narender.vangati@intel.com, abhinandan.gujjar@intel.com,
> nikhil.rao@intel.com, gage.eads@intel.com
> Subject: [v3,4/5] test: add event crypto adapter auto-test
> X-Mailer: git-send-email 1.9.1
>
> Signed-off-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
> ---
> MAINTAINERS | 1 +
> test/test/Makefile | 1 +
> test/test/test_event_crypto_adapter.c | 913 ++++++++++++++++++++++++++++++++++
> 3 files changed, 915 insertions(+)
> create mode 100644 test/test/test_event_crypto_adapter.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 991b465..60ebef7 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -366,6 +366,7 @@ Eventdev Crypto Adapter API - EXPERIMENTAL
> M: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
> T: git://dpdk.org/next/dpdk-next-eventdev
> F: lib/librte_eventdev/*crypto_adapter*
> +F: test/test/test_event_crypto_adapter.c
Shared(x86_64-native-linuxapp-gcc+shared) build fails due to
test_event_crypto_adapter.o: In function
`test_crypto_adapter_qp_add_del':
test_event_crypto_adapter.c:(.text+0x43): undefined reference to
`rte_event_crypto_adapter_caps_get'
test_event_crypto_adapter.o: In function
`test_crypto_adapter_conf_op_new_mode':
test_event_crypto_adapter.c:(.text+0x16c): undefined reference to
`rte_event_crypto_adapter_caps_get'
test_event_crypto_adapter.o: In function
`test_crypto_adapter_conf_op_forward_mode':
test_event_crypto_adapter.c:(.text+0x138f): undefined reference to
`rte_event_crypto_adapter_caps_get'
test_event_crypto_adapter.o: In function `test_op_new_mode':
test_event_crypto_adapter.c:(.text+0x181c): undefined reference to
`rte_event_crypto_adapter_caps_get'
test_event_crypto_adapter.o: In function
`test_sessionless_with_op_new_mode':
test_event_crypto_adapter.c:(.text+0x2111): undefined reference to
`rte_event_crypto_adapter_caps_get'
test_event_crypto_adapter.o:test_event_crypto_adapter.c:(.text+0x2261):
more undefined references to `rte_event_crypto_adapter_caps_get' follow
>
> Raw device API - EXPERIMENTAL
> M: Shreyansh Jain <shreyansh.jain@nxp.com>
> diff --git a/test/test/Makefile b/test/test/Makefile
> index 2630ab4..3a45ab2 100644
> --- a/test/test/Makefile
> +++ b/test/test/Makefile
> @@ -185,6 +185,7 @@ SRCS-y += test_eventdev.c
> SRCS-y += test_event_ring.c
> SRCS-y += test_event_eth_rx_adapter.c
> SRCS-y += test_event_timer_adapter.c
> +SRCS-y += test_event_crypto_adapter.c
> endif
>
> ifeq ($(CONFIG_RTE_LIBRTE_RAWDEV),y)
> diff --git a/test/test/test_event_crypto_adapter.c b/test/test/test_event_crypto_adapter.c
> new file mode 100644
> index 0000000..099adcb
> --- /dev/null
> +++ b/test/test/test_event_crypto_adapter.c
> @@ -0,0 +1,913 @@
> +static void
> +test_crypto_adapter_stop(void)
> +{
> + uint32_t evdev_service_id, adapter_service_id;
> +
> + /* retrieve service ids */
> + rte_event_dev_service_id_get(evdev, &evdev_service_id);
> + rte_event_crypto_adapter_service_id_get(
> + TEST_ADAPTER_ID, &adapter_service_id);
> +
> + /* stop services */
> + rte_service_runstate_set(evdev_service_id, 0);
> + rte_service_runstate_set(adapter_service_id, 0);
> + rte_service_lcore_stop(slcore_id);
> + rte_service_lcore_del(slcore_id);
In HW case, These service core wont be there. Right? So I think, you can
check the return value of rte_event_dev_service_id_get() and decide to
invoke rte_service_ runtime operations.
> + rte_event_crypto_adapter_stop(TEST_ADAPTER_ID);
> + rte_event_dev_stop(evdev);
> +}
> +/* SPDX-License-Identifier: BSD-3-Clause
> + * Copyright(c) 2018 Intel Corporation
> + */
> +
> +#include <string.h>
> +#include <rte_common.h>
> +#include <rte_mempool.h>
> +#include <rte_mbuf.h>
> +#include <rte_cryptodev.h>
> +#include <rte_eventdev.h>
> +#include <rte_bus_vdev.h>
> +#include <rte_service.h>
> +#include <rte_event_crypto_adapter.h>
> +#include "test.h"
> +
> +#define PKT_TRACE 0
> +#define NUM 1
> +#define DEFAULT_NUM_XFORMS (2)
> +#define NUM_MBUFS (8191)
> +#define MBUF_CACHE_SIZE (256)
> +#define MAXIMUM_IV_LENGTH (16)
> +#define DEFAULT_NUM_OPS_INFLIGHT (128)
> +#define TEST_APP_PORT_ID 0
> +#define TEST_APP_EV_QUEUE_ID 0
> +#define TEST_CRYPTO_EV_QUEUE_ID 1
> +#define TEST_ADAPTER_ID 0
> +#define TEST_CDEV_ID 0
> +#define TEST_CDEV_QP_ID 0
> +#define PACKET_LENGTH 64
> +#define NB_TEST_PORTS 1
> +#define NB_TEST_QUEUES 2
> +#define CRYPTODEV_NAME_NULL_PMD crypto_null
> +
> +#define MBUF_SIZE (sizeof(struct rte_mbuf) + \
> + RTE_PKTMBUF_HEADROOM + PACKET_LENGTH)
> +#define IV_OFFSET (sizeof(struct rte_crypto_op) + \
> + sizeof(struct rte_crypto_sym_op) + \
> + DEFAULT_NUM_XFORMS * \
> + sizeof(struct rte_crypto_sym_xform))
> +
> +
> +static const uint8_t text_64B[] = {
> + 0x05, 0x15, 0x77, 0x32, 0xc9, 0x66, 0x91, 0x50,
> + 0x93, 0x9f, 0xbb, 0x4e, 0x2e, 0x5a, 0x02, 0xd0,
> + 0x2d, 0x9d, 0x31, 0x5d, 0xc8, 0x9e, 0x86, 0x36,
> + 0x54, 0x5c, 0x50, 0xe8, 0x75, 0x54, 0x74, 0x5e,
> + 0xd5, 0xa2, 0x84, 0x21, 0x2d, 0xc5, 0xf8, 0x1c,
> + 0x55, 0x1a, 0xba, 0x91, 0xce, 0xb5, 0xa3, 0x1e,
> + 0x31, 0xbf, 0xe9, 0xa1, 0x97, 0x5c, 0x2b, 0xd6,
> + 0x57, 0xa5, 0x9f, 0xab, 0xbd, 0xb0, 0x9b, 0x9c
> +};
> +
> +struct event_crypto_adapter_test_params {
> + struct rte_mempool *mbuf_pool;
> + struct rte_mempool *op_mpool;
> + struct rte_mempool *session_mpool;
> + struct rte_cryptodev_config *config;
> + uint8_t crypto_event_port_id;
> +};
> +
> +struct rte_event response_info = {
> + .queue_id = TEST_APP_EV_QUEUE_ID,
> + .sched_type = RTE_SCHED_TYPE_ATOMIC,
> + .flow_id = 0xAABB,
> + .sub_event_type = 0,
> + .event_type = 0,
> + .priority = 0,
> + .impl_opaque = 0
> +};
> +
> +struct rte_event_crypto_request request_info = {
> + .cdev_id = TEST_CDEV_ID,
> + .queue_pair_id = TEST_CDEV_QP_ID
> +};
> +
> +static struct event_crypto_adapter_test_params params;
> +static uint8_t crypto_adapter_setup_done;
> +static uint32_t slcore_id;
> +static int evdev;
> +
> +static struct rte_mbuf *
> +alloc_fill_mbuf(struct rte_mempool *mpool, const uint8_t *data,
> + size_t len, uint8_t blocksize)
> +{
> + struct rte_mbuf *m = rte_pktmbuf_alloc(mpool);
> + size_t t_len = len - (blocksize ? (len % blocksize) : 0);
> +
> + if (m) {
> + char *dst = rte_pktmbuf_append(m, t_len);
> +
> + if (!dst) {
> + rte_pktmbuf_free(m);
> + return NULL;
> + }
> +
> + rte_memcpy(dst, (const void *)data, t_len);
> + }
> + return m;
> +}
> +
> +static int
> +send_recv_ev(struct rte_event *ev)
> +{
> + struct rte_crypto_op *op;
> + struct rte_event recv_ev;
> + int ret;
> +
> + ret = rte_event_enqueue_burst(evdev, TEST_APP_PORT_ID, ev, NUM);
> + TEST_ASSERT_EQUAL(ret, NUM,
> + "Failed to send event to crypto adapter\n");
> +
> + while (rte_event_dequeue_burst(evdev,
> + TEST_APP_PORT_ID, &recv_ev, NUM, 0) == 0)
> + rte_pause();
> +
> + op = recv_ev.event_ptr;
> +#if PKT_TRACE
> + struct rte_mbuf *m = op->sym->m_src;
> + rte_pktmbuf_dump(stdout, m, rte_pktmbuf_pkt_len(m));
> +#endif
> + rte_pktmbuf_free(op->sym->m_src);
> + rte_crypto_op_free(op);
> +
> + return TEST_SUCCESS;
> +}
> +
> +static int
> +test_crypto_adapter_stats(void)
> +{
> + struct rte_event_crypto_adapter_stats stats;
> +
> + rte_event_crypto_adapter_stats_get(TEST_ADAPTER_ID, &stats);
> + printf(" +------------------------------------------------------+\n");
> + printf(" + Crypto adapter stats for instance %u:\n", TEST_ADAPTER_ID);
> + printf(" + Event port poll count %lu\n",
> + stats.event_poll_count);
> + printf(" + Event dequeue count %lu\n",
> + stats.event_deq_count);
> + printf(" + Cryptodev enqueue count %lu\n",
> + stats.crypto_enq_count);
> + printf(" + Cryptodev enqueue failed count %lu\n",
> + stats.crypto_enq_fail);
> + printf(" + Cryptodev dequeue count %lu\n",
> + stats.crypto_deq_count);
> + printf(" + Event enqueue count %lu\n",
> + stats.event_enq_count);
> + printf(" + Event enqueue retry count %lu\n",
> + stats.event_enq_retry_count);
> + printf(" + Event enqueue fail count %lu\n",
> + stats.event_enq_fail_count);
> + printf(" +------------------------------------------------------+\n");
> +
> + rte_event_crypto_adapter_stats_reset(TEST_ADAPTER_ID);
> + return TEST_SUCCESS;
> +}
> +
> +static int
> +test_op_forward_mode(uint8_t session_less)
> +{
> + struct rte_crypto_sym_xform cipher_xform;
> + struct rte_cryptodev_sym_session *sess;
> + union rte_event_crypto_metadata m_data;
> + struct rte_crypto_sym_op *sym_op;
> + struct rte_crypto_op *op;
> + struct rte_mbuf *m;
> + struct rte_event ev;
> + uint32_t cap;
> + int ret;
> +
> + memset(&m_data, 0, sizeof(m_data));
> +
> + m = alloc_fill_mbuf(params.mbuf_pool, text_64B, PACKET_LENGTH, 0);
> + TEST_ASSERT_NOT_NULL(m, "Failed to allocate mbuf!\n");
> +#if PKT_TRACE
> + rte_pktmbuf_dump(stdout, m, rte_pktmbuf_pkt_len(m));
> +#endif
> + /* Setup Cipher Parameters */
> + cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
> + cipher_xform.next = NULL;
> +
> + cipher_xform.cipher.algo = RTE_CRYPTO_CIPHER_NULL;
> + cipher_xform.cipher.op = RTE_CRYPTO_CIPHER_OP_ENCRYPT;
> +
> + op = rte_crypto_op_alloc(params.op_mpool,
> + RTE_CRYPTO_OP_TYPE_SYMMETRIC);
> + TEST_ASSERT_NOT_NULL(op,
> + "Failed to allocate symmetric crypto operation struct\n");
> +
> + sym_op = op->sym;
> +
> + if (!session_less) {
> + sess = rte_cryptodev_sym_session_create(params.session_mpool);
> + TEST_ASSERT_NOT_NULL(sess, "Session creation failed\n");
> +
> + /* Create Crypto session*/
> + rte_cryptodev_sym_session_init(TEST_CDEV_ID, sess,
> + &cipher_xform, params.session_mpool);
> +
> + ret = rte_event_crypto_adapter_caps_get(TEST_ADAPTER_ID,
> + evdev, &cap);
> + TEST_ASSERT_SUCCESS(ret, "Failed to get adapter capabilities\n");
> +
> + if (cap & RTE_EVENT_CRYPTO_ADAPTER_CAP_SESSION_PRIVATE_DATA) {
> + /* Fill in private date information */
> + rte_memcpy(&m_data.response_info, &response_info,
> + sizeof(response_info));
> + rte_memcpy(&m_data.request_info, &request_info,
> + sizeof(request_info));
> + rte_cryptodev_sym_session_set_private_data(sess,
> + &m_data, sizeof(m_data));
> + }
> +
> + rte_crypto_op_attach_sym_session(op, sess);
> + } else {
> + struct rte_crypto_sym_xform *first_xform;
> +
> + rte_crypto_op_sym_xforms_alloc(op, NUM);
> + op->sess_type = RTE_CRYPTO_OP_SESSIONLESS;
> + first_xform = &cipher_xform;
> + sym_op->xform = first_xform;
> + uint32_t len = IV_OFFSET + MAXIMUM_IV_LENGTH +
> + (sizeof(struct rte_crypto_sym_xform) * 2);
> + op->private_data_offset = len;
> + /* Fill in private data information */
> + rte_memcpy(&m_data.response_info, &response_info,
> + sizeof(response_info));
> + rte_memcpy(&m_data.request_info, &request_info,
> + sizeof(request_info));
> + rte_memcpy((uint8_t *)op + len, &m_data, sizeof(m_data));
> + }
> +
> + sym_op->m_src = m;
> + sym_op->cipher.data.offset = 0;
> + sym_op->cipher.data.length = PACKET_LENGTH;
> +
> + /* Fill in event info and update event_ptr with rte_crypto_op */
> + memset(&ev, 0, sizeof(ev));
> + ev.queue_id = TEST_CRYPTO_EV_QUEUE_ID;
> + ev.sched_type = RTE_SCHED_TYPE_ATOMIC;
> + ev.flow_id = 0xAABB;
> + ev.event_ptr = op;
> +
> + ret = send_recv_ev(&ev);
> + TEST_ASSERT_SUCCESS(ret, "Failed to send/receive event to "
> + "crypto adapter\n");
> +
> + test_crypto_adapter_stats();
> +
> + return TEST_SUCCESS;
> +}
> +
> +static int
> +map_adapter_service_core(void)
> +{
> + uint32_t adapter_service_id;
> +
> + TEST_ASSERT_SUCCESS(rte_event_crypto_adapter_service_id_get(
> + TEST_ADAPTER_ID, &adapter_service_id),
> + "Failed to get event crypto adapter service id");
> +
> + TEST_ASSERT_SUCCESS(rte_service_map_lcore_set(adapter_service_id,
> + slcore_id, 1), "Failed to map adapter service");
> +
> + return TEST_SUCCESS;
> +}
> +
> +static int
> +test_sessionless_with_op_forward_mode(void)
> +{
> + uint32_t cap;
> + int ret;
> +
> + ret = rte_event_crypto_adapter_caps_get(TEST_ADAPTER_ID, evdev, &cap);
> + TEST_ASSERT_SUCCESS(ret, "Failed to get adapter capabilities\n");
> +
> + if (!(cap & RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_OP_FWD))
> + map_adapter_service_core();
> +
> + TEST_ASSERT_SUCCESS(rte_event_crypto_adapter_start(TEST_ADAPTER_ID),
> + "Failed to start event crypto adapter");
> +
> + ret = test_op_forward_mode(1);
> + TEST_ASSERT_SUCCESS(ret, "Sessionless - ENQ-DEQ mode test failed\n");
> + return TEST_SUCCESS;
> +}
> +
> +static int
> +test_session_with_op_forward_mode(void)
> +{
> + uint32_t cap;
> + int ret;
> +
> + ret = rte_event_crypto_adapter_caps_get(TEST_ADAPTER_ID, evdev, &cap);
> + TEST_ASSERT_SUCCESS(ret, "Failed to get adapter capabilities\n");
> +
> + if (!(cap & RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_OP_FWD))
> + map_adapter_service_core();
> +
> + TEST_ASSERT_SUCCESS(rte_event_crypto_adapter_start(TEST_ADAPTER_ID
> + ), "Failed to start event crypto adapter");
> +
> + ret = test_op_forward_mode(0);
> + TEST_ASSERT_SUCCESS(ret, "Session based - ENQ-DEQ mode test failed\n");
> + return TEST_SUCCESS;
> +}
> +
> +static int
> +send_op_recv_ev(struct rte_crypto_op *op)
> +{
> + struct rte_crypto_op *recv_op;
> + struct rte_event ev;
> + int ret;
> +
> + ret = rte_cryptodev_enqueue_burst(TEST_CDEV_ID, TEST_CDEV_QP_ID,
> + &op, NUM);
> + TEST_ASSERT_EQUAL(ret, NUM, "Failed to enqueue to cryptodev\n");
> + memset(&ev, 0, sizeof(ev));
> +
> + while (rte_event_dequeue_burst(evdev,
> + TEST_APP_PORT_ID, &ev, NUM, 0) == 0)
> + rte_pause();
> +
> + recv_op = ev.event_ptr;
> +#if PKT_TRACE
> + struct rte_mbuf *m = recv_op->sym->m_src;
> + rte_pktmbuf_dump(stdout, m, rte_pktmbuf_pkt_len(m));
> +#endif
> + rte_pktmbuf_free(recv_op->sym->m_src);
> + rte_crypto_op_free(recv_op);
> +
> + return TEST_SUCCESS;
> +}
> +
> +static int
> +test_op_new_mode(uint8_t session_less)
> +{
> + struct rte_crypto_sym_xform cipher_xform;
> + struct rte_cryptodev_sym_session *sess;
> + union rte_event_crypto_metadata m_data;
> + struct rte_crypto_sym_op *sym_op;
> + struct rte_crypto_op *op;
> + struct rte_mbuf *m;
> + uint32_t cap;
> + int ret;
> +
> + memset(&m_data, 0, sizeof(m_data));
> +
> + m = alloc_fill_mbuf(params.mbuf_pool, text_64B, PACKET_LENGTH, 0);
> + TEST_ASSERT_NOT_NULL(m, "Failed to allocate mbuf!\n");
> +#if PKT_TRACE
> + rte_pktmbuf_dump(stdout, m, rte_pktmbuf_pkt_len(m));
> +#endif
> + /* Setup Cipher Parameters */
> + cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
> + cipher_xform.next = NULL;
> +
> + cipher_xform.cipher.algo = RTE_CRYPTO_CIPHER_NULL;
> + cipher_xform.cipher.op = RTE_CRYPTO_CIPHER_OP_ENCRYPT;
> +
> + op = rte_crypto_op_alloc(params.op_mpool,
> + RTE_CRYPTO_OP_TYPE_SYMMETRIC);
> + TEST_ASSERT_NOT_NULL(op, "Failed to allocate crypto_op!\n");
> +
> + sym_op = op->sym;
> +
> + if (!session_less) {
> + sess = rte_cryptodev_sym_session_create(params.session_mpool);
> + TEST_ASSERT_NOT_NULL(sess, "Session creation failed\n");
> +
> + ret = rte_event_crypto_adapter_caps_get(TEST_ADAPTER_ID,
> + evdev, &cap);
> + TEST_ASSERT_SUCCESS(ret, "Failed to get adapter capabilities\n");
> +
> + if (cap & RTE_EVENT_CRYPTO_ADAPTER_CAP_SESSION_PRIVATE_DATA) {
> + /* Fill in private data information */
> + rte_memcpy(&m_data.response_info, &response_info,
> + sizeof(m_data));
> + rte_cryptodev_sym_session_set_private_data(sess,
> + &m_data, sizeof(m_data));
> + }
> + rte_cryptodev_sym_session_init(TEST_CDEV_ID, sess,
> + &cipher_xform, params.session_mpool);
> + rte_crypto_op_attach_sym_session(op, sess);
> + } else {
> + struct rte_crypto_sym_xform *first_xform;
> +
> + rte_crypto_op_sym_xforms_alloc(op, NUM);
> + op->sess_type = RTE_CRYPTO_OP_SESSIONLESS;
> + first_xform = &cipher_xform;
> + sym_op->xform = first_xform;
> + uint32_t len = IV_OFFSET + MAXIMUM_IV_LENGTH +
> + (sizeof(struct rte_crypto_sym_xform) * 2);
> + op->private_data_offset = len;
> + /* Fill in private data information */
> + rte_memcpy(&m_data.response_info, &response_info,
> + sizeof(m_data));
> + rte_memcpy((uint8_t *)op + len, &m_data, sizeof(m_data));
> + }
> +
> + sym_op->m_src = m;
> + sym_op->cipher.data.offset = 0;
> + sym_op->cipher.data.length = PACKET_LENGTH;
> +
> + ret = send_op_recv_ev(op);
> + TEST_ASSERT_SUCCESS(ret, "Failed to enqueue op to cryptodev\n");
> +
> + test_crypto_adapter_stats();
> +
> + return TEST_SUCCESS;
> +}
> +
> +static int
> +test_sessionless_with_op_new_mode(void)
> +{
> + uint32_t cap;
> + int ret;
> +
> + ret = rte_event_crypto_adapter_caps_get(TEST_ADAPTER_ID, evdev, &cap);
> + TEST_ASSERT_SUCCESS(ret, "Failed to get adapter capabilities\n");
> +
> + if (!(cap & RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_OP_FWD) ||
> + !(cap & RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_OP_NEW))
> + map_adapter_service_core();
> +
> + /* start the event crypto adapter */
> + TEST_ASSERT_SUCCESS(rte_event_crypto_adapter_start(TEST_ADAPTER_ID),
> + "Failed to start event crypto adapter");
> +
> + ret = test_op_new_mode(1);
> + TEST_ASSERT_SUCCESS(ret, "Sessionless - DEQ_ONLY test failed\n");
> + return TEST_SUCCESS;
> +}
> +
> +static int
> +test_session_with_op_new_mode(void)
> +{
> + uint32_t cap;
> + int ret;
> +
> + ret = rte_event_crypto_adapter_caps_get(TEST_ADAPTER_ID, evdev, &cap);
> + TEST_ASSERT_SUCCESS(ret, "Failed to get adapter capabilities\n");
> +
> + if (!(cap & RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_OP_FWD) ||
> + !(cap & RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_OP_NEW))
> + map_adapter_service_core();
> +
> + TEST_ASSERT_SUCCESS(rte_event_crypto_adapter_start(TEST_ADAPTER_ID),
> + "Failed to start event crypto adapter");
> +
> + ret = test_op_new_mode(0);
> + TEST_ASSERT_SUCCESS(ret, "Session based - DEQ_ONLY test failed\n");
> + return TEST_SUCCESS;
> +}
> +
> +static int
> +configure_cryptodev(void)
> +{
> + struct rte_cryptodev_qp_conf qp_conf;
> + struct rte_cryptodev_config conf;
> + struct rte_cryptodev_info info;
> + unsigned int session_size;
> + uint8_t nb_devs;
> + int ret;
> +
> + params.mbuf_pool = rte_pktmbuf_pool_create(
> + "CRYPTO_ADAPTER_MBUFPOOL",
> + NUM_MBUFS, MBUF_CACHE_SIZE, 0, MBUF_SIZE,
> + rte_socket_id());
> + if (params.mbuf_pool == NULL) {
> + RTE_LOG(ERR, USER1, "Can't create CRYPTO_MBUFPOOL\n");
> + return TEST_FAILED;
> + }
> +
> + params.op_mpool = rte_crypto_op_pool_create(
> + "EVENT_CRYPTO_SYM_OP_POOL",
> + RTE_CRYPTO_OP_TYPE_SYMMETRIC,
> + NUM_MBUFS, MBUF_CACHE_SIZE,
> + DEFAULT_NUM_XFORMS *
> + sizeof(struct rte_crypto_sym_xform) +
> + MAXIMUM_IV_LENGTH,
> + rte_socket_id());
> + if (params.op_mpool == NULL) {
> + RTE_LOG(ERR, USER1, "Can't create CRYPTO_OP_POOL\n");
> + return TEST_FAILED;
> + }
> +
> + /* Create a NULL crypto device */
> + nb_devs = rte_cryptodev_device_count_by_driver(
> + rte_cryptodev_driver_id_get(
> + RTE_STR(CRYPTODEV_NAME_NULL_PMD)));
> + if (!nb_devs) {
> + ret = rte_vdev_init(
> + RTE_STR(CRYPTODEV_NAME_NULL_PMD), NULL);
> +
> + TEST_ASSERT(ret == 0, "Failed to create pmd:%s instance\n",
> + RTE_STR(CRYPTODEV_NAME_NULL_PMD));
> + }
> +
> + nb_devs = rte_cryptodev_count();
> + if (!nb_devs) {
> + RTE_LOG(ERR, USER1, "No crypto devices found?\n");
> + return TEST_FAILED;
> + }
> +
> + /*
> + * Create mempool with maximum number of sessions * 2,
> + * to include the session headers & private data
> + */
> + session_size = rte_cryptodev_get_private_session_size(TEST_CDEV_ID);
> + session_size += sizeof(union rte_event_crypto_metadata);
> +
> + params.session_mpool = rte_mempool_create(
> + "CRYPTO_ADAPTER_SESSION_MP",
> + info.sym.max_nb_sessions * 2,
> + session_size,
> + 0, 0, NULL, NULL, NULL,
> + NULL, SOCKET_ID_ANY,
> + 0);
> +
> + TEST_ASSERT_NOT_NULL(params.session_mpool,
> + "session mempool allocation failed\n");
> +
> + rte_cryptodev_info_get(TEST_CDEV_ID, &info);
> + conf.nb_queue_pairs = info.max_nb_queue_pairs;
> + conf.socket_id = SOCKET_ID_ANY;
> +
> + TEST_ASSERT_SUCCESS(rte_cryptodev_configure(TEST_CDEV_ID,
> + &conf),
> + "Failed to configure cryptodev %u with %u qps\n",
> + TEST_CDEV_ID, conf.nb_queue_pairs);
> +
> + qp_conf.nb_descriptors = DEFAULT_NUM_OPS_INFLIGHT;
> +
> + TEST_ASSERT_SUCCESS(rte_cryptodev_queue_pair_setup(
> + TEST_CDEV_ID, TEST_CDEV_QP_ID, &qp_conf,
> + rte_cryptodev_socket_id(TEST_CDEV_ID),
> + params.session_mpool),
> + "Failed to setup queue pair %u on cryptodev %u\n",
> + TEST_CDEV_QP_ID, TEST_CDEV_ID);
> +
> + return TEST_SUCCESS;
> +}
> +
> +static inline void
> +evdev_set_conf_values(struct rte_event_dev_config *dev_conf,
> + struct rte_event_dev_info *info)
> +{
> + memset(dev_conf, 0, sizeof(struct rte_event_dev_config));
> + dev_conf->dequeue_timeout_ns = info->min_dequeue_timeout_ns;
> + dev_conf->nb_event_ports = NB_TEST_PORTS;
> + dev_conf->nb_event_queues = NB_TEST_QUEUES;
> + dev_conf->nb_event_queue_flows = info->max_event_queue_flows;
> + dev_conf->nb_event_port_dequeue_depth =
> + info->max_event_port_dequeue_depth;
> + dev_conf->nb_event_port_enqueue_depth =
> + info->max_event_port_enqueue_depth;
> + dev_conf->nb_event_port_enqueue_depth =
> + info->max_event_port_enqueue_depth;
> + dev_conf->nb_events_limit =
> + info->max_num_events;
> +}
> +
> +static int
> +configure_eventdev(void)
> +{
> + const char *eventdev_name = "event_sw0";
> + struct rte_event_queue_conf queue_conf;
> + struct rte_event_dev_config devconf;
> + struct rte_event_dev_info info;
> + uint32_t queue_count;
> + uint32_t port_count;
> + int ret;
> + uint8_t qid;
> +
> + evdev = rte_event_dev_get_dev_id(eventdev_name);
> + if (evdev < 0) {
> + if (rte_vdev_init(eventdev_name, NULL) < 0) {
> + RTE_LOG(DEBUG, USER1, "Error creating eventdev\n");
> + return TEST_FAILED;
> + }
> + evdev = rte_event_dev_get_dev_id(eventdev_name);
> + if (evdev < 0) {
> + RTE_LOG(DEBUG, USER1, "Error finding eventdev!\n");
> + return TEST_FAILED;
> + }
> + }
> +
> + ret = rte_event_dev_info_get(evdev, &info);
> + TEST_ASSERT_SUCCESS(ret, "Failed to get event dev info\n");
> +
> + evdev_set_conf_values(&devconf, &info);
> +
> + ret = rte_event_dev_configure(evdev, &devconf);
> + TEST_ASSERT_SUCCESS(ret, "Failed to configure eventdev\n");
> +
> + /* Set up event queue */
> + ret = rte_event_dev_attr_get(evdev, RTE_EVENT_DEV_ATTR_QUEUE_COUNT,
> + &queue_count);
> + TEST_ASSERT_SUCCESS(ret, "Queue count get failed\n");
> + TEST_ASSERT_EQUAL(queue_count, 2, "Unexpected queue count\n");
> +
> + qid = TEST_APP_EV_QUEUE_ID;
> + ret = rte_event_queue_setup(evdev, qid, NULL);
> + TEST_ASSERT_SUCCESS(ret, "Failed to setup queue=%d\n", qid);
> +
> + queue_conf.nb_atomic_flows = info.max_event_queue_flows;
> + queue_conf.nb_atomic_order_sequences = 32;
> + queue_conf.schedule_type = RTE_SCHED_TYPE_ATOMIC;
> + queue_conf.priority = RTE_EVENT_DEV_PRIORITY_HIGHEST;
> + queue_conf.event_queue_cfg = RTE_EVENT_QUEUE_CFG_SINGLE_LINK;
> +
> + qid = TEST_CRYPTO_EV_QUEUE_ID;
> + ret = rte_event_queue_setup(evdev, qid, &queue_conf);
> + TEST_ASSERT_SUCCESS(ret, "Failed to setup queue=%u\n", qid);
> +
> + /* Set up event port */
> + ret = rte_event_dev_attr_get(evdev, RTE_EVENT_DEV_ATTR_PORT_COUNT,
> + &port_count);
> + TEST_ASSERT_SUCCESS(ret, "Port count get failed\n");
> + TEST_ASSERT_EQUAL(port_count, 1, "Unexpected port count\n");
> +
> + ret = rte_event_port_setup(evdev, TEST_APP_PORT_ID, NULL);
> + TEST_ASSERT_SUCCESS(ret, "Failed to setup port=%d\n",
> + TEST_APP_PORT_ID);
> +
> + qid = TEST_APP_EV_QUEUE_ID;
> + ret = rte_event_port_link(evdev, TEST_APP_PORT_ID, &qid, NULL, 1);
> + TEST_ASSERT(ret >= 0, "Failed to link queue port=%d\n",
> + TEST_APP_PORT_ID);
> +
> + return TEST_SUCCESS;
> +}
> +
> +static void
> +test_crypto_adapter_free(void)
> +{
> + rte_event_crypto_adapter_free(TEST_ADAPTER_ID);
> +}
> +
> +static int
> +test_crypto_adapter_create(void)
> +{
> + struct rte_event_port_conf conf = {
> + .dequeue_depth = 8,
> + .enqueue_depth = 8,
> + .new_event_threshold = 1200,
> + };
> + int ret;
> +
> + /* Create adapter with default port creation callback */
> + ret = rte_event_crypto_adapter_create(TEST_ADAPTER_ID,
> + TEST_CDEV_ID,
> + &conf, 0);
> + TEST_ASSERT_SUCCESS(ret, "Failed to create event crypto adapter\n");
> +
> + return TEST_SUCCESS;
> +}
> +
> +static int
> +test_crypto_adapter_qp_add_del(void)
> +{
> + uint32_t cap;
> + int ret;
> +
> + ret = rte_event_crypto_adapter_caps_get(TEST_ADAPTER_ID, evdev, &cap);
> + TEST_ASSERT_SUCCESS(ret, "Failed to get adapter capabilities\n");
> +
> + if (cap & RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_QP_EV_BIND) {
> + ret = rte_event_crypto_adapter_queue_pair_add(TEST_ADAPTER_ID,
> + TEST_CDEV_ID, TEST_CDEV_QP_ID, &response_info);
> + } else
> + ret = rte_event_crypto_adapter_queue_pair_add(TEST_ADAPTER_ID,
> + TEST_CDEV_ID, TEST_CDEV_QP_ID, NULL);
> +
> + TEST_ASSERT_SUCCESS(ret, "Failed to create add queue pair\n");
> +
> + ret = rte_event_crypto_adapter_queue_pair_del(TEST_ADAPTER_ID,
> + TEST_CDEV_ID, TEST_CDEV_QP_ID);
> + TEST_ASSERT_SUCCESS(ret, "Failed to delete add queue pair\n");
> +
> + return TEST_SUCCESS;
> +}
> +
> +static int
> +configure_event_crypto_adapter(enum rte_event_crypto_adapter_mode mode)
> +{
> + struct rte_event_port_conf conf = {
> + .dequeue_depth = 8,
> + .enqueue_depth = 8,
> + .new_event_threshold = 1200,
> + };
> +
> + uint32_t cap;
> + int ret;
> +
> + /* Create adapter with default port creation callback */
> + ret = rte_event_crypto_adapter_create(TEST_ADAPTER_ID,
> + TEST_CDEV_ID,
> + &conf, mode);
> + TEST_ASSERT_SUCCESS(ret, "Failed to create event crypto adapter\n");
> +
> + ret = rte_event_crypto_adapter_caps_get(TEST_ADAPTER_ID, evdev, &cap);
> + TEST_ASSERT_SUCCESS(ret, "Failed to get adapter capabilities\n");
> +
> + if (cap & RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_QP_EV_BIND) {
> + ret = rte_event_crypto_adapter_queue_pair_add(TEST_ADAPTER_ID,
> + TEST_CDEV_ID, TEST_CDEV_QP_ID, &response_info);
> + } else
> + ret = rte_event_crypto_adapter_queue_pair_add(TEST_ADAPTER_ID,
> + TEST_CDEV_ID, TEST_CDEV_QP_ID, NULL);
> +
> + TEST_ASSERT_SUCCESS(ret, "Failed to add queue pair\n");
> +
> + ret = rte_event_crypto_adapter_event_port_get(TEST_ADAPTER_ID,
> + ¶ms.crypto_event_port_id);
> + TEST_ASSERT_SUCCESS(ret, "Failed to get event port\n");
> +
> + return TEST_SUCCESS;
> +}
> +
> +
next prev parent reply other threads:[~2018-05-07 5:21 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-05 18:47 [dpdk-dev] [v3,0/5] eventdev: cover letter - crypto adapter Abhinandan Gujjar
2018-05-05 18:47 ` [dpdk-dev] [v3,1/5] eventdev: introduce event " Abhinandan Gujjar
2018-05-07 9:35 ` Jerin Jacob
2018-05-07 12:32 ` Akhil Goyal
2018-05-07 13:07 ` Jerin Jacob
2018-05-08 7:34 ` Gujjar, Abhinandan S
2018-05-08 12:49 ` Jerin Jacob
2018-05-08 12:52 ` Gujjar, Abhinandan S
2018-05-05 18:47 ` [dpdk-dev] [v3, 2/5] eventdev: add APIs and PMD callbacks for " Abhinandan Gujjar
2018-05-07 9:52 ` Jerin Jacob
2018-05-08 8:39 ` Gujjar, Abhinandan S
2018-05-07 15:28 ` Akhil Goyal
2018-05-08 8:46 ` Gujjar, Abhinandan S
2018-05-05 18:47 ` [dpdk-dev] [v3,3/5] eventdev: add crypto adapter implementation Abhinandan Gujjar
2018-05-07 4:58 ` [dpdk-dev] [v3, 3/5] " Jerin Jacob
2018-05-07 6:50 ` Jerin Jacob
2018-05-05 18:47 ` [dpdk-dev] [v3,4/5] test: add event crypto adapter auto-test Abhinandan Gujjar
2018-05-07 5:20 ` Jerin Jacob [this message]
2018-05-07 5:58 ` Jerin Jacob
2018-05-07 10:08 ` Jerin Jacob
2018-05-08 8:27 ` Gujjar, Abhinandan S
2018-05-05 18:47 ` [dpdk-dev] [v3,5/5] doc: add event crypto adapter documentation Abhinandan Gujjar
2018-05-07 12:27 ` [dpdk-dev] [v3, 5/5] " Jerin Jacob
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180507052053.GA25735@jerin \
--to=jerin.jacob@caviumnetworks.com \
--cc=abhinandan.gujjar@intel.com \
--cc=akhil.goyal@nxp.com \
--cc=dev@dpdk.org \
--cc=gage.eads@intel.com \
--cc=hemant.agrawal@nxp.com \
--cc=narender.vangati@intel.com \
--cc=nikhil.rao@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).