From: Pablo de Lara <pablo.de.lara.guarch@intel.com>
To: fiona.trahe@intel.com, tomaszx.jozwiak@intel.com,
john.griffin@intel.com, deepak.k.jain@intel.com
Cc: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v7 04/16] compress/qat: add xform processing
Date: Fri, 13 Jul 2018 03:28:13 +0100 [thread overview]
Message-ID: <20180713022825.33106-5-pablo.de.lara.guarch@intel.com> (raw)
In-Reply-To: <20180713022825.33106-1-pablo.de.lara.guarch@intel.com>
From: Fiona Trahe <fiona.trahe@intel.com>
Add code to process compressdev rte_comp_xforms, creating
private qat_comp_xforms with prepared firmware message templates.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
---
drivers/compress/qat/qat_comp.c | 239 ++++++++++++++++++++++++++++++++++++
drivers/compress/qat/qat_comp.h | 30 +++++
drivers/compress/qat/qat_comp_pmd.h | 16 +++
3 files changed, 285 insertions(+)
diff --git a/drivers/compress/qat/qat_comp.c b/drivers/compress/qat/qat_comp.c
index caa115806..cb2005a4b 100644
--- a/drivers/compress/qat/qat_comp.c
+++ b/drivers/compress/qat/qat_comp.c
@@ -2,4 +2,243 @@
* Copyright(c) 2018 Intel Corporation
*/
+
+#include <rte_mempool.h>
+#include <rte_mbuf.h>
+#include <rte_hexdump.h>
+#include <rte_comp.h>
+#include <rte_bus_pci.h>
+#include <rte_byteorder.h>
+#include <rte_memcpy.h>
+#include <rte_common.h>
+#include <rte_spinlock.h>
+#include <rte_log.h>
+#include <rte_malloc.h>
+
+#include "qat_logs.h"
#include "qat_comp.h"
+#include "qat_comp_pmd.h"
+
+unsigned int
+qat_comp_xform_size(void)
+{
+ return RTE_ALIGN_CEIL(sizeof(struct qat_comp_xform), 8);
+}
+
+static void qat_comp_create_req_hdr(struct icp_qat_fw_comn_req_hdr *header,
+ enum qat_comp_request_type request)
+{
+ if (request == QAT_COMP_REQUEST_FIXED_COMP_STATELESS)
+ header->service_cmd_id = ICP_QAT_FW_COMP_CMD_STATIC;
+ else if (request == QAT_COMP_REQUEST_DYNAMIC_COMP_STATELESS)
+ header->service_cmd_id = ICP_QAT_FW_COMP_CMD_DYNAMIC;
+ else if (request == QAT_COMP_REQUEST_DECOMPRESS)
+ header->service_cmd_id = ICP_QAT_FW_COMP_CMD_DECOMPRESS;
+
+ header->service_type = ICP_QAT_FW_COMN_REQ_CPM_FW_COMP;
+ header->hdr_flags =
+ ICP_QAT_FW_COMN_HDR_FLAGS_BUILD(ICP_QAT_FW_COMN_REQ_FLAG_SET);
+
+ header->comn_req_flags = ICP_QAT_FW_COMN_FLAGS_BUILD(
+ QAT_COMN_CD_FLD_TYPE_16BYTE_DATA, QAT_COMN_PTR_TYPE_FLAT);
+}
+
+static int qat_comp_create_templates(struct qat_comp_xform *qat_xform,
+ const struct rte_memzone *interm_buff_mz __rte_unused,
+ const struct rte_comp_xform *xform)
+{
+ struct icp_qat_fw_comp_req *comp_req;
+ int comp_level, algo;
+ uint32_t req_par_flags;
+ int direction = ICP_QAT_HW_COMPRESSION_DIR_COMPRESS;
+
+ if (unlikely(qat_xform == NULL)) {
+ QAT_LOG(ERR, "Session was not created for this device");
+ return -EINVAL;
+ }
+
+ if (qat_xform->qat_comp_request_type == QAT_COMP_REQUEST_DECOMPRESS) {
+ direction = ICP_QAT_HW_COMPRESSION_DIR_DECOMPRESS;
+ comp_level = ICP_QAT_HW_COMPRESSION_DEPTH_1;
+ req_par_flags = ICP_QAT_FW_COMP_REQ_PARAM_FLAGS_BUILD(
+ ICP_QAT_FW_COMP_SOP, ICP_QAT_FW_COMP_EOP,
+ ICP_QAT_FW_COMP_BFINAL, ICP_QAT_FW_COMP_NO_CNV,
+ ICP_QAT_FW_COMP_NO_CNV_RECOVERY);
+
+ } else {
+ if (xform->compress.level == RTE_COMP_LEVEL_PMD_DEFAULT)
+ comp_level = ICP_QAT_HW_COMPRESSION_DEPTH_8;
+ else if (xform->compress.level == 1)
+ comp_level = ICP_QAT_HW_COMPRESSION_DEPTH_1;
+ else if (xform->compress.level == 2)
+ comp_level = ICP_QAT_HW_COMPRESSION_DEPTH_4;
+ else if (xform->compress.level == 3)
+ comp_level = ICP_QAT_HW_COMPRESSION_DEPTH_8;
+ else if (xform->compress.level >= 4 &&
+ xform->compress.level <= 9)
+ comp_level = ICP_QAT_HW_COMPRESSION_DEPTH_16;
+ else {
+ QAT_LOG(ERR, "compression level not supported");
+ return -EINVAL;
+ }
+ req_par_flags = ICP_QAT_FW_COMP_REQ_PARAM_FLAGS_BUILD(
+ ICP_QAT_FW_COMP_SOP, ICP_QAT_FW_COMP_EOP,
+ ICP_QAT_FW_COMP_BFINAL, ICP_QAT_FW_COMP_CNV,
+ ICP_QAT_FW_COMP_CNV_RECOVERY);
+ }
+
+ switch (xform->compress.algo) {
+ case RTE_COMP_ALGO_DEFLATE:
+ algo = ICP_QAT_HW_COMPRESSION_ALGO_DEFLATE;
+ break;
+ case RTE_COMP_ALGO_LZS:
+ default:
+ /* RTE_COMP_NULL */
+ QAT_LOG(ERR, "compression algorithm not supported");
+ return -EINVAL;
+ }
+
+ comp_req = &qat_xform->qat_comp_req_tmpl;
+
+ /* Initialize header */
+ qat_comp_create_req_hdr(&comp_req->comn_hdr,
+ qat_xform->qat_comp_request_type);
+
+ comp_req->comn_hdr.serv_specif_flags = ICP_QAT_FW_COMP_FLAGS_BUILD(
+ ICP_QAT_FW_COMP_STATELESS_SESSION,
+ ICP_QAT_FW_COMP_NOT_AUTO_SELECT_BEST,
+ ICP_QAT_FW_COMP_NOT_ENH_AUTO_SELECT_BEST,
+ ICP_QAT_FW_COMP_NOT_DISABLE_TYPE0_ENH_AUTO_SELECT_BEST,
+ ICP_QAT_FW_COMP_DISABLE_SECURE_RAM_USED_AS_INTMD_BUF);
+
+ comp_req->cd_pars.sl.comp_slice_cfg_word[0] =
+ ICP_QAT_HW_COMPRESSION_CONFIG_BUILD(
+ direction,
+ /* In CPM 1.6 only valid mode ! */
+ ICP_QAT_HW_COMPRESSION_DELAYED_MATCH_ENABLED, algo,
+ /* Translate level to depth */
+ comp_level, ICP_QAT_HW_COMPRESSION_FILE_TYPE_0);
+
+ comp_req->comp_pars.initial_adler = 1;
+ comp_req->comp_pars.initial_crc32 = 0;
+ comp_req->comp_pars.req_par_flags = req_par_flags;
+
+
+ if (qat_xform->qat_comp_request_type ==
+ QAT_COMP_REQUEST_FIXED_COMP_STATELESS ||
+ qat_xform->qat_comp_request_type == QAT_COMP_REQUEST_DECOMPRESS) {
+ ICP_QAT_FW_COMN_NEXT_ID_SET(&comp_req->comp_cd_ctrl,
+ ICP_QAT_FW_SLICE_DRAM_WR);
+ ICP_QAT_FW_COMN_CURR_ID_SET(&comp_req->comp_cd_ctrl,
+ ICP_QAT_FW_SLICE_COMP);
+ } else if (qat_xform->qat_comp_request_type ==
+ QAT_COMP_REQUEST_DYNAMIC_COMP_STATELESS) {
+
+ QAT_LOG(ERR, "Dynamic huffman encoding not supported");
+ return -EINVAL;
+ }
+
+#if RTE_LOG_DP_LEVEL >= RTE_LOG_DEBUG
+ QAT_DP_HEXDUMP_LOG(DEBUG, "qat compression message template:", comp_req,
+ sizeof(struct icp_qat_fw_comp_req));
+#endif
+ return 0;
+}
+
+/**
+ * Create driver private_xform data.
+ *
+ * @param dev
+ * Compressdev device
+ * @param xform
+ * xform data from application
+ * @param private_xform
+ * ptr where handle of pmd's private_xform data should be stored
+ * @return
+ * - if successful returns 0
+ * and valid private_xform handle
+ * - <0 in error cases
+ * - Returns -EINVAL if input parameters are invalid.
+ * - Returns -ENOTSUP if comp device does not support the comp transform.
+ * - Returns -ENOMEM if the private_xform could not be allocated.
+ */
+int
+qat_comp_private_xform_create(struct rte_compressdev *dev,
+ const struct rte_comp_xform *xform,
+ void **private_xform)
+{
+ struct qat_comp_dev_private *qat = dev->data->dev_private;
+
+ if (unlikely(private_xform == NULL)) {
+ QAT_LOG(ERR, "QAT: private_xform parameter is NULL");
+ return -EINVAL;
+ }
+ if (unlikely(qat->xformpool == NULL)) {
+ QAT_LOG(ERR, "QAT device has no private_xform mempool");
+ return -ENOMEM;
+ }
+ if (rte_mempool_get(qat->xformpool, private_xform)) {
+ QAT_LOG(ERR, "Couldn't get object from qat xform mempool");
+ return -ENOMEM;
+ }
+
+ struct qat_comp_xform *qat_xform =
+ (struct qat_comp_xform *)*private_xform;
+
+ if (xform->type == RTE_COMP_COMPRESS) {
+ if (xform->compress.deflate.huffman ==
+ RTE_COMP_HUFFMAN_DYNAMIC) {
+ QAT_LOG(ERR,
+ "QAT device doesn't support dynamic compression");
+ return -ENOTSUP;
+ }
+
+ if (xform->compress.deflate.huffman == RTE_COMP_HUFFMAN_FIXED ||
+ ((xform->compress.deflate.huffman == RTE_COMP_HUFFMAN_DEFAULT)
+ && qat->interm_buff_mz == NULL))
+
+ qat_xform->qat_comp_request_type =
+ QAT_COMP_REQUEST_FIXED_COMP_STATELESS;
+
+
+ } else {
+ qat_xform->qat_comp_request_type = QAT_COMP_REQUEST_DECOMPRESS;
+ }
+
+ qat_xform->checksum_type = xform->compress.chksum;
+
+ if (qat_comp_create_templates(qat_xform, qat->interm_buff_mz, xform)) {
+ QAT_LOG(ERR, "QAT: Problem with setting compression");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/**
+ * Free driver private_xform data.
+ *
+ * @param dev
+ * Compressdev device
+ * @param private_xform
+ * handle of pmd's private_xform data
+ * @return
+ * - 0 if successful
+ * - <0 in error cases
+ * - Returns -EINVAL if input parameters are invalid.
+ */
+int
+qat_comp_private_xform_free(struct rte_compressdev *dev __rte_unused,
+ void *private_xform)
+{
+ struct qat_comp_xform *qat_xform =
+ (struct qat_comp_xform *)private_xform;
+
+ if (qat_xform) {
+ memset(qat_xform, 0, qat_comp_xform_size());
+ struct rte_mempool *mp = rte_mempool_from_obj(qat_xform);
+
+ rte_mempool_put(mp, qat_xform);
+ return 0;
+ }
+ return -EINVAL;
+}
diff --git a/drivers/compress/qat/qat_comp.h b/drivers/compress/qat/qat_comp.h
index 89c475ee6..0f58a76c4 100644
--- a/drivers/compress/qat/qat_comp.h
+++ b/drivers/compress/qat/qat_comp.h
@@ -10,5 +10,35 @@
#include <rte_compressdev.h>
#include <rte_compressdev_pmd.h>
+#include "icp_qat_hw.h"
+#include "icp_qat_fw_comp.h"
+#include "icp_qat_fw_la.h"
+
+enum qat_comp_request_type {
+ QAT_COMP_REQUEST_FIXED_COMP_STATELESS,
+ QAT_COMP_REQUEST_DYNAMIC_COMP_STATELESS,
+ QAT_COMP_REQUEST_DECOMPRESS,
+ REQ_COMP_END
+};
+
+
+struct qat_comp_xform {
+ struct icp_qat_fw_comp_req qat_comp_req_tmpl;
+ enum qat_comp_request_type qat_comp_request_type;
+ enum rte_comp_checksum_type checksum_type;
+};
+
+
+int
+qat_comp_private_xform_create(struct rte_compressdev *dev,
+ const struct rte_comp_xform *xform,
+ void **private_xform);
+
+int
+qat_comp_private_xform_free(struct rte_compressdev *dev, void *private_xform);
+
+unsigned int
+qat_comp_xform_size(void);
+
#endif
#endif
diff --git a/drivers/compress/qat/qat_comp_pmd.h b/drivers/compress/qat/qat_comp_pmd.h
index 9b5b54394..fd97cbfd2 100644
--- a/drivers/compress/qat/qat_comp_pmd.h
+++ b/drivers/compress/qat/qat_comp_pmd.h
@@ -11,5 +11,21 @@
#include <rte_compressdev_pmd.h>
+/** private data structure for a QAT compression device.
+ * This QAT device is a device offering only a compression service,
+ * there can be one of these on each qat_pci_device (VF).
+ */
+struct qat_comp_dev_private {
+ struct qat_pci_device *qat_dev;
+ /**< The qat pci device hosting the service */
+ struct rte_compressdev *compressdev;
+ /**< The pointer to this compression device structure */
+ const struct rte_memzone *interm_buff_mz;
+ /**< The device's memory for intermediate buffers */
+ struct rte_mempool *xformpool;
+ /**< The device's pool for qat_comp_xforms */
+
+};
+
#endif
#endif /* _QAT_COMP_PMD_H_ */
--
2.14.4
next prev parent reply other threads:[~2018-07-13 10:34 UTC|newest]
Thread overview: 106+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-23 18:40 [dpdk-dev] [PATCH] compress/qat: add compression PMD Fiona Trahe
2018-07-05 16:05 ` [dpdk-dev] [PATCH v2 00/16] " Fiona Trahe
2018-07-05 17:32 ` [dpdk-dev] [PATCH v3 " Fiona Trahe
2018-07-10 0:41 ` [dpdk-dev] [PATCH v4 " Fiona Trahe
2018-07-11 11:56 ` [dpdk-dev] [PATCH v5 " Fiona Trahe
2018-07-12 16:04 ` [dpdk-dev] [PATCH v6 " Fiona Trahe
2018-07-13 2:28 ` [dpdk-dev] [PATCH v7 " Pablo de Lara
2018-07-13 2:28 ` [dpdk-dev] [PATCH v7 01/16] common/qat: updated firmware headers Pablo de Lara
2018-07-13 2:28 ` [dpdk-dev] [PATCH v7 02/16] compress/qat: add makefiles for PMD Pablo de Lara
2018-07-13 2:28 ` [dpdk-dev] [PATCH v7 03/16] compress/qat: add meson build Pablo de Lara
2018-07-13 2:28 ` Pablo de Lara [this message]
2018-07-13 2:28 ` [dpdk-dev] [PATCH v7 05/16] compress/qat: create FW request and process response Pablo de Lara
2018-07-13 2:28 ` [dpdk-dev] [PATCH v7 06/16] compress/qat: check that correct firmware is in use Pablo de Lara
2018-07-13 2:28 ` [dpdk-dev] [PATCH v7 07/16] compress/qat: add stats functions Pablo de Lara
2018-07-13 2:28 ` [dpdk-dev] [PATCH v7 08/16] compress/qat: setup queue-pairs for compression service Pablo de Lara
2018-07-13 2:28 ` [dpdk-dev] [PATCH v7 09/16] compress/qat: add fns to configure and clear device Pablo de Lara
2018-07-13 2:28 ` [dpdk-dev] [PATCH v7 10/16] compress/qat: add fn to return device info Pablo de Lara
2018-07-13 2:28 ` [dpdk-dev] [PATCH v7 11/16] compress/qat: add enqueue/dequeue functions Pablo de Lara
2018-07-13 2:28 ` [dpdk-dev] [PATCH v7 12/16] compress/qat: add device start and stop fns Pablo de Lara
2018-07-13 2:28 ` [dpdk-dev] [PATCH v7 13/16] compress/qat: create and populate the ops structure Pablo de Lara
2018-07-13 2:28 ` [dpdk-dev] [PATCH v7 14/16] compress/qat: add fns to create and destroy the PMD Pablo de Lara
2018-07-13 2:28 ` [dpdk-dev] [PATCH v7 15/16] compress/qat: prevent device usage if incorrect firmware Pablo de Lara
2018-07-13 2:28 ` [dpdk-dev] [PATCH v7 16/16] doc/qat: refactor docs adding compression guide Pablo de Lara
2018-07-13 14:22 ` [dpdk-dev] [PATCH v7 00/16] compress/qat: add compression PMD De Lara Guarch, Pablo
2018-07-12 16:04 ` [dpdk-dev] [PATCH v6 01/16] common/qat: updated firmware headers Fiona Trahe
2018-07-12 16:04 ` [dpdk-dev] [PATCH v6 02/16] compress/qat: add makefiles for PMD Fiona Trahe
2018-07-12 16:04 ` [dpdk-dev] [PATCH v6 03/16] compress/qat: add meson build Fiona Trahe
2018-07-12 16:04 ` [dpdk-dev] [PATCH v6 04/16] compress/qat: add xform processing Fiona Trahe
2018-07-12 16:04 ` [dpdk-dev] [PATCH v6 05/16] compress/qat: create fw request and process response Fiona Trahe
2018-07-12 16:04 ` [dpdk-dev] [PATCH v6 06/16] compress/qat: check that correct firmware is in use Fiona Trahe
2018-07-12 16:04 ` [dpdk-dev] [PATCH v6 07/16] compress/qat: add stats functions Fiona Trahe
2018-07-12 16:04 ` [dpdk-dev] [PATCH v6 08/16] compress/qat: setup queue-pairs for compression service Fiona Trahe
2018-07-12 16:04 ` [dpdk-dev] [PATCH v6 09/16] compress/qat: add fns to configure and clear device Fiona Trahe
2018-07-12 16:04 ` [dpdk-dev] [PATCH v6 10/16] compress/qat: add fn to return device info Fiona Trahe
2018-07-12 16:04 ` [dpdk-dev] [PATCH v6 11/16] compress/qat: add enqueue/dequeue functions Fiona Trahe
2018-07-12 16:04 ` [dpdk-dev] [PATCH v6 12/16] compress/qat: add device start and stop fns Fiona Trahe
2018-07-12 16:04 ` [dpdk-dev] [PATCH v6 13/16] compress/qat: create and populate the ops structure Fiona Trahe
2018-07-12 16:04 ` [dpdk-dev] [PATCH v6 14/16] compress/qat: add fns to create and destroy the PMD Fiona Trahe
2018-07-12 16:04 ` [dpdk-dev] [PATCH v6 15/16] compress/qat: prevent device usage if incorrect firmware Fiona Trahe
2018-07-12 16:04 ` [dpdk-dev] [PATCH v6 16/16] docs/qat: refactor docs adding compression guide Fiona Trahe
2018-07-11 11:56 ` [dpdk-dev] [PATCH v5 01/16] common/qat: updated firmware headers Fiona Trahe
2018-07-11 11:56 ` [dpdk-dev] [PATCH v5 02/16] compress/qat: add makefiles for PMD Fiona Trahe
2018-07-12 12:41 ` De Lara Guarch, Pablo
2018-07-11 11:56 ` [dpdk-dev] [PATCH v5 03/16] compress/qat: add meson build Fiona Trahe
2018-07-11 11:56 ` [dpdk-dev] [PATCH v5 04/16] compress/qat: add xform processing Fiona Trahe
2018-07-11 11:56 ` [dpdk-dev] [PATCH v5 05/16] compress/qat: create fw request and process response Fiona Trahe
2018-07-11 11:56 ` [dpdk-dev] [PATCH v5 06/16] compress/qat: check that correct firmware is in use Fiona Trahe
2018-07-11 11:57 ` [dpdk-dev] [PATCH v5 07/16] compress/qat: add stats functions Fiona Trahe
2018-07-11 11:57 ` [dpdk-dev] [PATCH v5 08/16] compress/qat: setup queue-pairs for compression service Fiona Trahe
2018-07-11 11:57 ` [dpdk-dev] [PATCH v5 09/16] compress/qat: add fns to configure and clear device Fiona Trahe
2018-07-11 11:57 ` [dpdk-dev] [PATCH v5 10/16] compress/qat: add fn to return device info Fiona Trahe
2018-07-11 11:57 ` [dpdk-dev] [PATCH v5 11/16] compress/qat: add enqueue/dequeue functions Fiona Trahe
2018-07-11 11:57 ` [dpdk-dev] [PATCH v5 12/16] compress/qat: add device start and stop fns Fiona Trahe
2018-07-11 11:57 ` [dpdk-dev] [PATCH v5 13/16] compress/qat: create and populate the ops structure Fiona Trahe
2018-07-11 11:57 ` [dpdk-dev] [PATCH v5 14/16] compress/qat: add fns to create and destroy the PMD Fiona Trahe
2018-07-11 11:57 ` [dpdk-dev] [PATCH v5 15/16] compress/qat: prevent device usage if incorrect firmware Fiona Trahe
2018-07-11 11:57 ` [dpdk-dev] [PATCH v5 16/16] docs/qat: refactor docs adding compression guide Fiona Trahe
2018-07-12 15:56 ` De Lara Guarch, Pablo
2018-07-10 0:41 ` [dpdk-dev] [PATCH v4 01/16] common/qat: updated firmware headers Fiona Trahe
2018-07-10 0:41 ` [dpdk-dev] [PATCH v4 02/16] compress/qat: add makefiles for PMD Fiona Trahe
2018-07-10 0:41 ` [dpdk-dev] [PATCH v4 03/16] compress/qat: add meson build Fiona Trahe
2018-07-10 0:41 ` [dpdk-dev] [PATCH v4 04/16] compress/qat: add xform processing Fiona Trahe
2018-07-10 0:41 ` [dpdk-dev] [PATCH v4 05/16] compress/qat: create fw request and process response Fiona Trahe
2018-07-10 0:41 ` [dpdk-dev] [PATCH v4 06/16] compress/qat: check that correct firmware is in use Fiona Trahe
2018-07-10 0:41 ` [dpdk-dev] [PATCH v4 07/16] compress/qat: add stats functions Fiona Trahe
2018-07-10 0:41 ` [dpdk-dev] [PATCH v4 08/16] compress/qat: setup queue-pairs for compression service Fiona Trahe
2018-07-10 0:41 ` [dpdk-dev] [PATCH v4 09/16] compress/qat: add fns to configure and clear device Fiona Trahe
2018-07-10 0:41 ` [dpdk-dev] [PATCH v4 10/16] compress/qat: add fn to return device info Fiona Trahe
2018-07-10 0:41 ` [dpdk-dev] [PATCH v4 11/16] compress/qat: add enqueue/dequeue functions Fiona Trahe
2018-07-10 0:41 ` [dpdk-dev] [PATCH v4 12/16] compress/qat: add device start and stop fns Fiona Trahe
2018-07-10 0:41 ` [dpdk-dev] [PATCH v4 13/16] compress/qat: create and populate the ops structure Fiona Trahe
2018-07-10 0:41 ` [dpdk-dev] [PATCH v4 14/16] compress/qat: add fns to create and destroy the PMD Fiona Trahe
2018-07-10 0:41 ` [dpdk-dev] [PATCH v4 15/16] compress/qat: prevent device usage if incorrect firmware Fiona Trahe
2018-07-10 0:41 ` [dpdk-dev] [PATCH v4 16/16] docs/qat: refactor docs adding compression guide Fiona Trahe
2018-07-05 17:32 ` [dpdk-dev] [PATCH v3 01/16] common/qat: updated firmware headers Fiona Trahe
2018-07-05 17:32 ` [dpdk-dev] [PATCH v3 02/16] compress/qat: add makefiles for PMD Fiona Trahe
2018-07-05 17:32 ` [dpdk-dev] [PATCH v3 03/16] compress/qat: add meson build Fiona Trahe
2018-07-05 17:32 ` [dpdk-dev] [PATCH v3 04/16] compress/qat: add xform processing Fiona Trahe
2018-07-05 17:32 ` [dpdk-dev] [PATCH v3 05/16] compress/qat: create fw request and process response Fiona Trahe
2018-07-05 17:32 ` [dpdk-dev] [PATCH v3 06/16] compress/qat: check that correct firmware is in use Fiona Trahe
2018-07-05 17:32 ` [dpdk-dev] [PATCH v3 07/16] compress/qat: add stats functions Fiona Trahe
2018-07-05 17:32 ` [dpdk-dev] [PATCH v3 08/16] compress/qat: setup queue-pairs for compression service Fiona Trahe
2018-07-05 17:32 ` [dpdk-dev] [PATCH v3 09/16] compress/qat: add fns to configure and clear device Fiona Trahe
2018-07-05 17:32 ` [dpdk-dev] [PATCH v3 10/16] compress/qat: add fn to return device info Fiona Trahe
2018-07-05 17:32 ` [dpdk-dev] [PATCH v3 11/16] compress/qat: add enqueue/dequeue functions Fiona Trahe
2018-07-05 17:32 ` [dpdk-dev] [PATCH v3 12/16] compress/qat: add device start and stop fns Fiona Trahe
2018-07-05 17:32 ` [dpdk-dev] [PATCH v3 13/16] compress/qat: create and populate the ops structure Fiona Trahe
2018-07-05 17:32 ` [dpdk-dev] [PATCH v3 14/16] compress/qat: add fns to create and destroy the PMD Fiona Trahe
2018-07-05 17:32 ` [dpdk-dev] [PATCH v3 15/16] compress/qat: prevent device usage if incorrect firmware Fiona Trahe
2018-07-05 17:33 ` [dpdk-dev] [PATCH v3 16/16] docs/qat: refactor docs adding compression guide Fiona Trahe
2018-07-05 16:05 ` [dpdk-dev] [PATCH v2 01/16] common/qat: updated firmware headers Fiona Trahe
2018-07-05 16:05 ` [dpdk-dev] [PATCH v2 02/16] compress/qat: add makefiles for PMD Fiona Trahe
2018-07-05 16:05 ` [dpdk-dev] [PATCH v2 03/16] compress/qat: add meson build Fiona Trahe
2018-07-05 16:05 ` [dpdk-dev] [PATCH v2 04/16] compress/qat: add xform processing Fiona Trahe
2018-07-05 16:05 ` [dpdk-dev] [PATCH v2 05/16] compress/qat: create fw request and process response Fiona Trahe
2018-07-05 16:05 ` [dpdk-dev] [PATCH v2 06/16] compress/qat: check that correct firmware is in use Fiona Trahe
2018-07-05 16:05 ` [dpdk-dev] [PATCH v2 07/16] compress/qat: add stats functions Fiona Trahe
2018-07-05 16:05 ` [dpdk-dev] [PATCH v2 08/16] compress/qat: setup queue-pairs for compression service Fiona Trahe
2018-07-05 16:05 ` [dpdk-dev] [PATCH v2 09/16] compress/qat: add fns to configure and clear device Fiona Trahe
2018-07-05 16:05 ` [dpdk-dev] [PATCH v2 10/16] compress/qat: add fn to return device info Fiona Trahe
2018-07-05 16:05 ` [dpdk-dev] [PATCH v2 11/16] compress/qat: add enqueue/dequeue functions Fiona Trahe
2018-07-05 16:05 ` [dpdk-dev] [PATCH v2 12/16] compress/qat: add device start and stop fns Fiona Trahe
2018-07-05 16:05 ` [dpdk-dev] [PATCH v2 13/16] compress/qat: create and populate the ops structure Fiona Trahe
2018-07-05 16:05 ` [dpdk-dev] [PATCH v2 14/16] compress/qat: add fns to create and destroy the PMD Fiona Trahe
2018-07-05 16:05 ` [dpdk-dev] [PATCH v2 15/16] compress/qat: prevent device usage if incorrect firmware Fiona Trahe
2018-07-05 16:05 ` [dpdk-dev] [PATCH v2 16/16] docs/qat: refactor docs adding compression guide Fiona Trahe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180713022825.33106-5-pablo.de.lara.guarch@intel.com \
--to=pablo.de.lara.guarch@intel.com \
--cc=deepak.k.jain@intel.com \
--cc=dev@dpdk.org \
--cc=fiona.trahe@intel.com \
--cc=john.griffin@intel.com \
--cc=tomaszx.jozwiak@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).