DPDK patches and discussions
 help / color / mirror / Atom feed
From: Jerin Jacob <jerin.jacob@caviumnetworks.com>
To: Anatoly Burakov <anatoly.burakov@intel.com>
Cc: dev@dpdk.org, thomas@monjalon.net, t.yoshimura8869@gmail.com
Subject: Re: [dpdk-dev] [PATCH] vfio: revert retry logic for MSI-X BAR mapping
Date: Tue, 31 Jul 2018 09:17:41 +0530	[thread overview]
Message-ID: <20180731034740.GA3371@jerin> (raw)
In-Reply-To: <4107730371de4ac30367258cb3419df184d1ec16.1532947452.git.anatoly.burakov@intel.com>

-----Original Message-----
> Date: Mon, 30 Jul 2018 11:59:06 +0100
> From: Anatoly Burakov <anatoly.burakov@intel.com>
> To: dev@dpdk.org
> CC: thomas@monjalon.net, jerin.jacob@caviumnetworks.com,
>  t.yoshimura8869@gmail.com
> Subject: [PATCH] vfio: revert retry logic for MSI-X BAR mapping
> X-Mailer: git-send-email 1.7.0.7
> 
> External Email
> 
> This reverts commit d4774a568ba0a5923229974a002972c83eb04570.
> 
> The patch is incomplete because kernel 4.16+, while being capable
> of mapping MSI-X BARs, will also report if such a capability is
> available. Without checking this capability, gratuitous errors
> are displayed on kernels <4.16 while VFIO is attempting to mmap
> MSI-X BAR and fails, which can be confusing to the user.
> 
> Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>

Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>

> ---
>  drivers/bus/pci/linux/pci_vfio.c | 93 ++++++++++++++------------------
>  1 file changed, 41 insertions(+), 52 deletions(-)
> 
> diff --git a/drivers/bus/pci/linux/pci_vfio.c b/drivers/bus/pci/linux/pci_vfio.c
> index bb6ef7b67..686386d6a 100644
> --- a/drivers/bus/pci/linux/pci_vfio.c
> +++ b/drivers/bus/pci/linux/pci_vfio.c
> @@ -332,59 +332,50 @@ pci_vfio_mmap_bar(int vfio_dev_fd, struct mapped_pci_resource *vfio_res,
>         void *bar_addr;
>         struct pci_msix_table *msix_table = &vfio_res->msix_table;
>         struct pci_map *bar = &vfio_res->maps[bar_index];
> -       bool again = false;
> 
>         if (bar->size == 0)
>                 /* Skip this BAR */
>                 return 0;
> 
> +       if (msix_table->bar_index == bar_index) {
> +               /*
> +                * VFIO will not let us map the MSI-X table,
> +                * but we can map around it.
> +                */
> +               uint32_t table_start = msix_table->offset;
> +               uint32_t table_end = table_start + msix_table->size;
> +               table_end = (table_end + ~PAGE_MASK) & PAGE_MASK;
> +               table_start &= PAGE_MASK;
> +
> +               if (table_start == 0 && table_end >= bar->size) {
> +                       /* Cannot map this BAR */
> +                       RTE_LOG(DEBUG, EAL, "Skipping BAR%d\n", bar_index);
> +                       bar->size = 0;
> +                       bar->addr = 0;
> +                       return 0;
> +               }
> +
> +               memreg[0].offset = bar->offset;
> +               memreg[0].size = table_start;
> +               memreg[1].offset = bar->offset + table_end;
> +               memreg[1].size = bar->size - table_end;
> +
> +               RTE_LOG(DEBUG, EAL,
> +                       "Trying to map BAR%d that contains the MSI-X "
> +                       "table. Trying offsets: "
> +                       "0x%04lx:0x%04lx, 0x%04lx:0x%04lx\n", bar_index,
> +                       memreg[0].offset, memreg[0].size,
> +                       memreg[1].offset, memreg[1].size);
> +       } else {
> +               memreg[0].offset = bar->offset;
> +               memreg[0].size = bar->size;
> +       }
> +
>         /* reserve the address using an inaccessible mapping */
>         bar_addr = mmap(bar->addr, bar->size, 0, MAP_PRIVATE |
>                         MAP_ANONYMOUS | additional_flags, -1, 0);
> -       if (bar_addr == MAP_FAILED) {
> -               RTE_LOG(ERR, EAL,
> -                       "Failed to create inaccessible mapping for BAR%d\n",
> -                       bar_index);
> -               return -1;
> -       }
> -
> -       memreg[0].offset = bar->offset;
> -       memreg[0].size = bar->size;
> -       do {
> +       if (bar_addr != MAP_FAILED) {
>                 void *map_addr = NULL;
> -               if (again) {
> -                       /*
> -                        * VFIO did not let us map the MSI-X table,
> -                        * but we can map around it.
> -                        */
> -                       uint32_t table_start = msix_table->offset;
> -                       uint32_t table_end = table_start + msix_table->size;
> -                       table_end = (table_end + ~PAGE_MASK) & PAGE_MASK;
> -                       table_start &= PAGE_MASK;
> -
> -                       if (table_start == 0 && table_end >= bar->size) {
> -                               /* Cannot map this BAR */
> -                               RTE_LOG(DEBUG, EAL, "Skipping BAR%d\n",
> -                                               bar_index);
> -                               munmap(bar_addr, bar->size);
> -                               bar->size = 0;
> -                               bar->addr = 0;
> -                               return 0;
> -                       }
> -
> -                       memreg[0].offset = bar->offset;
> -                       memreg[0].size = table_start;
> -                       memreg[1].offset = bar->offset + table_end;
> -                       memreg[1].size = bar->size - table_end;
> -
> -                       RTE_LOG(DEBUG, EAL,
> -                               "Trying to map BAR%d that contains the MSI-X "
> -                               "table. Trying offsets: "
> -                               "0x%04lx:0x%04lx, 0x%04lx:0x%04lx\n", bar_index,
> -                               memreg[0].offset, memreg[0].size,
> -                               memreg[1].offset, memreg[1].size);
> -               }
> -
>                 if (memreg[0].size) {
>                         /* actual map of first part */
>                         map_addr = pci_map_resource(bar_addr, vfio_dev_fd,
> @@ -393,12 +384,6 @@ pci_vfio_mmap_bar(int vfio_dev_fd, struct mapped_pci_resource *vfio_res,
>                                                         MAP_FIXED);
>                 }
> 
> -               if (map_addr == MAP_FAILED &&
> -                       msix_table->bar_index == bar_index && !again) {
> -                       again = true;
> -                       continue;
> -               }
> -
>                 /* if there's a second part, try to map it */
>                 if (map_addr != MAP_FAILED
>                         && memreg[1].offset && memreg[1].size) {
> @@ -419,8 +404,12 @@ pci_vfio_mmap_bar(int vfio_dev_fd, struct mapped_pci_resource *vfio_res,
>                                         bar_index);
>                         return -1;
>                 }
> -               break;
> -       } while (again);
> +       } else {
> +               RTE_LOG(ERR, EAL,
> +                               "Failed to create inaccessible mapping for BAR%d\n",
> +                               bar_index);
> +               return -1;
> +       }
> 
>         bar->addr = bar_addr;
>         return 0;
> --
> 2.17.1

  reply	other threads:[~2018-07-31  3:48 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-30 10:59 Anatoly Burakov
2018-07-31  3:47 ` Jerin Jacob [this message]
2018-08-01 15:52   ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180731034740.GA3371@jerin \
    --to=jerin.jacob@caviumnetworks.com \
    --cc=anatoly.burakov@intel.com \
    --cc=dev@dpdk.org \
    --cc=t.yoshimura8869@gmail.com \
    --cc=thomas@monjalon.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).