DPDK patches and discussions
 help / color / mirror / Atom feed
From: Gagandeep Singh <g.singh@nxp.com>
To: dev@dpdk.org, ferruh.yigit@intel.com
Cc: pankaj.chauhan@nxp.com, Gagandeep Singh <g.singh@nxp.com>
Subject: [dpdk-dev] [PATCH v2 3/3] net/enetc: enable Rx and Tx
Date: Thu, 13 Sep 2018 15:12:01 +0530	[thread overview]
Message-ID: <20180913094201.17098-4-g.singh@nxp.com> (raw)
In-Reply-To: <20180913094201.17098-1-g.singh@nxp.com>

Add RX and TX queue setup, datapath functions
and enable the packet parsing

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
---
 MAINTAINERS                      |   1 +
 drivers/net/enetc/Makefile       |   3 +-
 drivers/net/enetc/enetc_ethdev.c |   6 +-
 drivers/net/enetc/enetc_rxtx.c   | 447 +++++++++++++++++++++++++++++++
 drivers/net/enetc/meson.build    |   3 +-
 5 files changed, 456 insertions(+), 4 deletions(-)
 create mode 100644 drivers/net/enetc/enetc_rxtx.c

diff --git a/MAINTAINERS b/MAINTAINERS
index fc70ac049..b67f2afa4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -645,6 +645,7 @@ F: doc/guides/nics/features/dpaa2.ini
 
 NXP enetc
 M: Gagandeep Singh <g.singh@nxp.com>
+M: Pankaj Chauhan <pankaj.chauhan@nxp.com>
 F: drivers/net/enetc/
 F: doc/guides/nics/enetc.rst
 F: doc/guides/nics/features/enetc.ini
diff --git a/drivers/net/enetc/Makefile b/drivers/net/enetc/Makefile
index 3f4ba97da..1f886831a 100644
--- a/drivers/net/enetc/Makefile
+++ b/drivers/net/enetc/Makefile
@@ -16,8 +16,9 @@ LIBABIVER := 1
 # all source are stored in SRCS-y
 #
 SRCS-$(CONFIG_RTE_LIBRTE_ENETC_PMD) += enetc_ethdev.c
+SRCS-$(CONFIG_RTE_LIBRTE_ENETC_PMD) += enetc_rxtx.c
 
-LDLIBS += -lrte_eal
+LDLIBS += -lrte_eal -lrte_mempool
 LDLIBS += -lrte_ethdev
 LDLIBS += -lrte_bus_pci
 
diff --git a/drivers/net/enetc/enetc_ethdev.c b/drivers/net/enetc/enetc_ethdev.c
index 06438835d..67106593f 100644
--- a/drivers/net/enetc/enetc_ethdev.c
+++ b/drivers/net/enetc/enetc_ethdev.c
@@ -37,6 +37,8 @@ static const struct eth_dev_ops enetc_ops = {
 	.dev_close            = enetc_dev_close,
 	.link_update          = enetc_link_update,
 	.dev_infos_get        = enetc_dev_infos_get,
+	.rx_queue_setup       = enetc_rx_queue_setup,
+	.tx_queue_setup       = enetc_tx_queue_setup,
 };
 
 /**
@@ -61,8 +63,8 @@ enetc_dev_init(struct rte_eth_dev *eth_dev)
 
 	PMD_INIT_FUNC_TRACE();
 	eth_dev->dev_ops = &enetc_ops;
-	eth_dev->rx_pkt_burst = NULL;
-	eth_dev->tx_pkt_burst = NULL;
+	eth_dev->rx_pkt_burst = &enetc_recv_pkts;
+	eth_dev->tx_pkt_burst = &enetc_xmit_pkts;
 
 	rte_eth_copy_pci_info(eth_dev, pci_dev);
 
diff --git a/drivers/net/enetc/enetc_rxtx.c b/drivers/net/enetc/enetc_rxtx.c
new file mode 100644
index 000000000..b01f64b0c
--- /dev/null
+++ b/drivers/net/enetc/enetc_rxtx.c
@@ -0,0 +1,447 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2018 NXP
+ */
+
+#include <stdbool.h>
+#include <stdint.h>
+#include <unistd.h>
+
+#include "rte_ethdev.h"
+#include "rte_malloc.h"
+#include "rte_memzone.h"
+
+#include "base/enetc_hw.h"
+#include "enetc.h"
+#include "enetc_logs.h"
+
+#define ENETC_RXBD_BUNDLE 8 /* Number of BDs to update at once */
+
+static inline int enetc_bd_unused(struct enetc_bdr *bdr)
+{
+	if (bdr->next_to_clean > bdr->next_to_use)
+		return bdr->next_to_clean - bdr->next_to_use - 1;
+
+	return bdr->bd_count + bdr->next_to_clean - bdr->next_to_use - 1;
+}
+
+static bool enetc_clean_tx_ring(struct enetc_bdr *tx_ring)
+{
+	int tx_frm_cnt = 0;
+	struct enetc_swbd *tx_swbd;
+	int i;
+
+	i = tx_ring->next_to_clean;
+	tx_swbd = &tx_ring->q_swbd[i];
+	while ((int)(enetc_rd_reg(tx_ring->tcisr) & ENETC_TBCISR_IDX_MASK) != i) {
+		rte_pktmbuf_free(tx_swbd->buffer_addr);
+		tx_swbd->buffer_addr = NULL;
+		tx_swbd++;
+		i++;
+		if (unlikely(i == tx_ring->bd_count)) {
+			i = 0;
+			tx_swbd = &tx_ring->q_swbd[0];
+		}
+
+		tx_frm_cnt++;
+	}
+	tx_ring->next_to_clean = i;
+	return tx_frm_cnt++;
+}
+
+uint16_t enetc_xmit_pkts(void *tx_queue,
+			struct rte_mbuf **tx_pkts,
+				uint16_t nb_pkts)
+{
+	struct enetc_swbd *tx_swbd;
+	int i, start;
+	struct enetc_tx_bd *txbd;
+	struct enetc_bdr *tx_ring = (struct enetc_bdr *)tx_queue;
+
+	i = tx_ring->next_to_use;
+	start = 0;
+	while (nb_pkts--) {
+		enetc_clean_tx_ring(tx_ring);
+
+		tx_ring->q_swbd[i].buffer_addr = tx_pkts[start];
+
+		txbd = ENETC_TXBD(*tx_ring, i);
+		tx_swbd = &tx_ring->q_swbd[i];
+		txbd->frm_len = tx_pkts[start]->pkt_len;
+		txbd->buf_len = txbd->frm_len;
+		txbd->flags = rte_cpu_to_le_16(ENETC_TXBD_FLAGS_F);
+		txbd->addr =
+		(uint64_t)rte_cpu_to_le_64(tx_swbd->buffer_addr->buf_addr +
+				tx_swbd->buffer_addr->data_off);
+		i++;
+		start++;
+		if (unlikely(i == tx_ring->bd_count))
+			i = 0;
+	}
+	tx_ring->next_to_use = i;
+	enetc_wr_reg(tx_ring->tcir, i);
+	return start;
+}
+
+static int enetc_refill_rx_ring(struct enetc_bdr *rx_ring, const int buff_cnt)
+{
+	struct enetc_swbd *rx_swbd;
+	union enetc_rx_bd *rxbd;
+	int i, j;
+
+	i = rx_ring->next_to_use;
+	rx_swbd = &rx_ring->q_swbd[i];
+	rxbd = ENETC_RXBD(*rx_ring, i);
+
+	for (j = 0; j < buff_cnt; j++) {
+		rx_swbd->buffer_addr =
+			rte_cpu_to_le_64(rte_mbuf_raw_alloc(rx_ring->mb_pool));
+		rxbd->w.addr = (uint64_t)rx_swbd->buffer_addr->buf_addr +
+						rx_swbd->buffer_addr->data_off;
+		/* clear 'R" as well */
+		rxbd->r.lstatus = 0;
+		rx_swbd++;
+		rxbd++;
+		i++;
+
+		if (unlikely(i == rx_ring->bd_count)) {
+			i = 0;
+			rxbd = ENETC_RXBD(*rx_ring, 0);
+			rx_swbd = &rx_ring->q_swbd[i];
+		}
+	}
+	if (likely(j)) {
+		rx_ring->next_to_alloc = i;
+		rx_ring->next_to_use = i;
+		enetc_wr_reg(rx_ring->rcir, i);
+	}
+	return j;
+}
+
+
+static inline void __attribute__((hot))
+enetc_dev_rx_parse(struct rte_mbuf *m, uint16_t parse_results)
+{
+	ENETC_PMD_DP_DEBUG("parse summary = 0x%x   ", parse_results);
+
+	m->packet_type = RTE_PTYPE_UNKNOWN;
+	switch (parse_results) {
+	case ENETC_PKT_TYPE_ETHER:
+		m->packet_type = RTE_PTYPE_L2_ETHER;
+		break;
+	case ENETC_PKT_TYPE_IPV4:
+		m->packet_type = RTE_PTYPE_L2_ETHER |
+					RTE_PTYPE_L3_IPV4;
+		break;
+	case ENETC_PKT_TYPE_IPV6:
+		m->packet_type = RTE_PTYPE_L2_ETHER |
+					RTE_PTYPE_L3_IPV6;
+		break;
+	case ENETC_PKT_TYPE_IPV4_TCP:
+		m->packet_type = RTE_PTYPE_L2_ETHER |
+			RTE_PTYPE_L3_IPV4 | RTE_PTYPE_L4_TCP;
+		break;
+	case ENETC_PKT_TYPE_IPV6_TCP:
+		m->packet_type = RTE_PTYPE_L2_ETHER |
+			RTE_PTYPE_L3_IPV6 | RTE_PTYPE_L4_TCP;
+		break;
+	case ENETC_PKT_TYPE_IPV4_UDP:
+		m->packet_type = RTE_PTYPE_L2_ETHER |
+			RTE_PTYPE_L3_IPV4 | RTE_PTYPE_L4_UDP;
+		break;
+	case ENETC_PKT_TYPE_IPV6_UDP:
+		m->packet_type = RTE_PTYPE_L2_ETHER |
+			RTE_PTYPE_L3_IPV6 | RTE_PTYPE_L4_UDP;
+		break;
+	case ENETC_PKT_TYPE_IPV4_SCTP:
+		m->packet_type = RTE_PTYPE_L2_ETHER |
+			RTE_PTYPE_L3_IPV4 | RTE_PTYPE_L4_SCTP;
+		break;
+	case ENETC_PKT_TYPE_IPV6_SCTP:
+		m->packet_type = RTE_PTYPE_L2_ETHER |
+			RTE_PTYPE_L3_IPV6 | RTE_PTYPE_L4_SCTP;
+		break;
+	case ENETC_PKT_TYPE_IPV4_ICMP:
+		m->packet_type = RTE_PTYPE_L2_ETHER |
+			RTE_PTYPE_L3_IPV4 | RTE_PTYPE_L4_ICMP;
+		break;
+	case ENETC_PKT_TYPE_IPV6_ICMP:
+		m->packet_type = RTE_PTYPE_L2_ETHER |
+			RTE_PTYPE_L3_IPV6 | RTE_PTYPE_L4_ICMP;
+		break;
+	/* More switch cases can be added */
+	default:
+		m->packet_type = RTE_PTYPE_UNKNOWN;
+	}
+}
+
+static int
+enetc_clean_rx_ring(struct enetc_bdr *rx_ring, struct rte_mbuf **rx_pkts,
+								int work_limit)
+{
+	int rx_frm_cnt = 0;
+	int cleaned_cnt, i;
+	struct enetc_swbd *rx_swbd;
+
+	cleaned_cnt = enetc_bd_unused(rx_ring);
+
+	/* next descriptor to process */
+	i = rx_ring->next_to_clean;
+	rx_swbd = &rx_ring->q_swbd[i];
+
+	while (likely(rx_frm_cnt < work_limit)) {
+		union enetc_rx_bd *rxbd;
+		uint32_t bd_status;
+
+		if (cleaned_cnt >= ENETC_RXBD_BUNDLE) {
+			int count = enetc_refill_rx_ring(rx_ring, cleaned_cnt);
+
+			cleaned_cnt -= count;
+		}
+		rxbd = ENETC_RXBD(*rx_ring, i);
+		bd_status = rte_le_to_cpu_32(rxbd->r.lstatus);
+		if (!bd_status)
+			break;
+
+		rx_swbd->buffer_addr->pkt_len = rxbd->r.buf_len;
+		rx_swbd->buffer_addr->data_len = rxbd->r.buf_len;
+		rx_swbd->buffer_addr->hash.rss = rxbd->r.rss_hash;
+		rx_swbd->buffer_addr->ol_flags = 0;
+		enetc_dev_rx_parse(rx_swbd->buffer_addr, rxbd->r.parse_summary);
+
+		rx_pkts[rx_frm_cnt] = rx_swbd->buffer_addr;
+
+		cleaned_cnt++;
+		rx_swbd++;
+		i++;
+		if (unlikely(i == rx_ring->bd_count)) {
+			i = 0;
+			rx_swbd = &rx_ring->q_swbd[i];
+		}
+		rx_ring->next_to_clean = i;
+		rx_frm_cnt++;
+	}
+
+	return rx_frm_cnt;
+}
+
+uint16_t enetc_recv_pkts(void *rxq, struct rte_mbuf **rx_pkts,
+			uint16_t nb_pkts)
+{
+	struct enetc_bdr *rx_ring = (struct enetc_bdr *)rxq;
+
+	return enetc_clean_rx_ring(rx_ring, rx_pkts, nb_pkts);
+}
+
+static int enetc_alloc_txbdr(struct enetc_bdr *txr)
+{
+	int size;
+
+	size = txr->bd_count * sizeof(struct enetc_swbd);
+	txr->q_swbd = rte_malloc(NULL, size, RTE_CACHE_LINE_SIZE);
+	if (txr->q_swbd == NULL)
+		return -ENOMEM;
+
+	size = txr->bd_count * sizeof(struct enetc_tx_bd);
+	txr->bd_base = rte_malloc(NULL, size, RTE_CACHE_LINE_SIZE);
+
+	if (txr->bd_base == NULL) {
+		rte_free(txr->q_swbd);
+		txr->q_swbd = NULL;
+		return -ENOMEM;
+	}
+	txr->next_to_clean = 0;
+	txr->next_to_use = 0;
+
+	return 0;
+}
+
+static void enetc_free_bdr(struct enetc_bdr *rxr)
+{
+	rte_free(rxr->q_swbd);
+	rte_free(rxr->bd_base);
+	rxr->q_swbd = NULL;
+	rxr->bd_base = NULL;
+}
+
+static int enetc_alloc_tx_resources(struct enetc_eth_adapter *priv)
+{
+	int i, err;
+
+	for (i = 0; i < priv->num_tx_rings; i++) {
+		err = enetc_alloc_txbdr(priv->tx_ring[i]);
+
+		if (err)
+			goto fail;
+		priv->tx_ring[i]->index = i;
+	}
+
+	return 0;
+
+fail:
+	while (i-- > 0)
+		enetc_free_bdr(priv->tx_ring[i]);
+
+	return err;
+}
+
+static void enetc_setup_txbdr(struct enetc_hw *hw, struct enetc_bdr *tx_ring)
+{
+	int idx = tx_ring->index;
+	uint32_t tbmr;
+
+	enetc_txbdr_wr(hw, idx, ENETC_TBBAR0,
+			lower_32_bits((uint64_t)tx_ring->bd_base));
+
+	enetc_txbdr_wr(hw, idx, ENETC_TBBAR1,
+			upper_32_bits((uint64_t)tx_ring->bd_base));
+	enetc_txbdr_wr(hw, idx, ENETC_TBLENR,
+			ENETC_RTBLENR_LEN(tx_ring->bd_count));
+
+	tbmr = ENETC_TBMR_EN;
+	/* enable ring */
+	enetc_txbdr_wr(hw, idx, ENETC_TBMR, tbmr);
+
+	enetc_txbdr_wr(hw, idx, ENETC_TBCIR, 0);
+	enetc_txbdr_wr(hw, idx, ENETC_TBCISR, 0);
+	tx_ring->tcir = hw->reg + ENETC_BDR(TX, idx, ENETC_TBCIR);
+	tx_ring->tcisr = hw->reg + ENETC_BDR(TX, idx, ENETC_TBCISR);
+}
+
+static void enetc_setup_tx_bdrs(struct rte_eth_dev *dev)
+{
+	int i;
+	struct enetc_eth_adapter *priv =
+			ENETC_DEV_PRIVATE(dev->data->dev_private);
+
+	for (i = 0; i < priv->num_tx_rings; i++) {
+		enetc_setup_txbdr(&priv->hw.hw, priv->tx_ring[i]);
+		dev->data->tx_queues[i] = priv->tx_ring[i];
+	}
+}
+
+int enetc_tx_queue_setup(struct rte_eth_dev *dev,
+				uint16_t queue_idx,
+				uint16_t nb_desc,
+				unsigned int socket_id,
+				const struct rte_eth_txconf *tx_conf)
+{
+	struct enetc_eth_adapter *adapter =
+			ENETC_DEV_PRIVATE(dev->data->dev_private);
+	int err = 0;
+
+	err = enetc_alloc_tx_resources(adapter);
+	if (err)
+		goto err_alloc_tx;
+
+	enetc_setup_tx_bdrs(dev);
+
+err_alloc_tx:
+	return err;
+}
+
+static int enetc_alloc_rxbdr(struct enetc_bdr *rxr)
+{
+	int size;
+
+	size = rxr->bd_count * sizeof(struct enetc_swbd);
+	rxr->q_swbd = rte_malloc(NULL, size, RTE_CACHE_LINE_SIZE);
+	if (rxr->q_swbd == NULL)
+		return -ENOMEM;
+
+	size = rxr->bd_count * sizeof(union enetc_rx_bd);
+	rxr->bd_base = rte_malloc(NULL, size, RTE_CACHE_LINE_SIZE);
+
+	if (rxr->bd_base == NULL) {
+		rte_free(rxr->q_swbd);
+		rxr->q_swbd = NULL;
+		return -ENOMEM;
+	}
+
+	rxr->next_to_clean = 0;
+	rxr->next_to_use = 0;
+	rxr->next_to_alloc = 0;
+
+	return 0;
+}
+
+static int enetc_alloc_rx_resources(struct enetc_eth_adapter  *priv)
+{
+	int i, err;
+
+	for (i = 0; i < priv->num_rx_rings; i++) {
+		err = enetc_alloc_rxbdr(priv->rx_ring[i]);
+
+		if (err)
+			goto fail;
+
+		priv->rx_ring[i]->index = i;
+	}
+	return 0;
+fail:
+	while (i-- > 0)
+		enetc_free_bdr(priv->rx_ring[i]);
+
+	return err;
+}
+
+static void enetc_setup_rxbdr(struct enetc_hw *hw, struct enetc_bdr *rx_ring,
+						struct rte_mempool *mb_pool)
+{
+	int idx = rx_ring->index;
+	uint16_t buf_size;
+
+	enetc_rxbdr_wr(hw, idx, ENETC_RBBAR0,
+			lower_32_bits((uint64_t)rx_ring->bd_base));
+
+	enetc_rxbdr_wr(hw, idx, ENETC_RBBAR1,
+			upper_32_bits((uint64_t)rx_ring->bd_base));
+
+	enetc_rxbdr_wr(hw, idx, ENETC_RBLENR,
+			ENETC_RTBLENR_LEN(rx_ring->bd_count));
+
+	rx_ring->mb_pool = mb_pool;
+
+	/* enable ring */
+	enetc_rxbdr_wr(hw, idx, ENETC_RBMR, ENETC_RBMR_EN);
+	enetc_rxbdr_wr(hw, idx, ENETC_RBPIR, 0);
+	rx_ring->rcir = hw->reg + ENETC_BDR(RX, idx, ENETC_RBCIR);
+
+	enetc_refill_rx_ring(rx_ring, (enetc_bd_unused(rx_ring)));
+	buf_size = (uint16_t)(rte_pktmbuf_data_room_size(rx_ring->mb_pool) -
+			RTE_PKTMBUF_HEADROOM);
+
+	enetc_rxbdr_wr(hw, idx, ENETC_RBBSR, buf_size);
+}
+
+static void enetc_setup_bdrs(struct rte_eth_dev *dev,
+					struct rte_mempool *mb_pool)
+{
+	int i;
+	struct enetc_eth_adapter *priv =
+			ENETC_DEV_PRIVATE(dev->data->dev_private);
+
+	for (i = 0; i < priv->num_rx_rings; i++) {
+		enetc_setup_rxbdr(&priv->hw.hw, priv->rx_ring[i], mb_pool);
+		dev->data->rx_queues[i] = priv->rx_ring[i];
+	}
+}
+
+
+int enetc_rx_queue_setup(struct rte_eth_dev *dev, uint16_t rx_queue_id,
+		uint16_t nb_rx_desc, unsigned int socket_id,
+		const struct rte_eth_rxconf *rx_conf,
+		struct rte_mempool *mb_pool)
+{
+	struct enetc_eth_adapter *adapter =
+			ENETC_DEV_PRIVATE(dev->data->dev_private);
+	int err = 0;
+
+	err = enetc_alloc_rx_resources(adapter);
+	if (err)
+		goto err_alloc_rx;
+
+	enetc_setup_bdrs(dev, mb_pool);
+
+err_alloc_rx:
+	return err;
+}
diff --git a/drivers/net/enetc/meson.build b/drivers/net/enetc/meson.build
index 506b174ed..733156bbf 100644
--- a/drivers/net/enetc/meson.build
+++ b/drivers/net/enetc/meson.build
@@ -5,6 +5,7 @@ if host_machine.system() != 'linux'
 	build = false
 endif
 
-sources = files('enetc_ethdev.c')
+sources = files('enetc_ethdev.c',
+		'enetc_rxtx.c')
 
 includes += include_directories('base')
-- 
2.17.1

  parent reply	other threads:[~2018-09-13  9:42 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-06  5:54 [dpdk-dev] [PATCH 0/3] introduces the ENETC PMD Gagandeep Singh
2018-09-06  5:54 ` [dpdk-dev] [PATCH 1/3] doc: add usage doc for " Gagandeep Singh
2018-09-06  5:54 ` [dpdk-dev] [PATCH 2/3] net/enetc: add ENETC PMD with basic operations Gagandeep Singh
2018-09-19 12:15   ` Shreyansh Jain
2018-09-06  5:54 ` [dpdk-dev] [PATCH 3/3] net/enetc: enable Rx and Tx Gagandeep Singh
2018-09-13  9:41 ` [dpdk-dev] [PATCH v2 0/3] introduces the enetc PMD driver Gagandeep Singh
2018-09-13  9:41   ` [dpdk-dev] [PATCH v2 1/3] doc: add usage doc for ENETC PMD Gagandeep Singh
2018-09-21 13:22     ` Ferruh Yigit
2018-09-13  9:42   ` [dpdk-dev] [PATCH v2 2/3] net/enetc: add ENETC PMD with basic operations Gagandeep Singh
2018-09-21 13:27     ` Ferruh Yigit
2018-09-13  9:42   ` Gagandeep Singh [this message]
2018-09-19 12:26     ` [dpdk-dev] [PATCH v2 3/3] net/enetc: enable Rx and Tx Shreyansh Jain
2018-09-21 13:28     ` Ferruh Yigit
2018-09-28  5:16   ` [dpdk-dev] [PATCH v3 0/3] introduces the enetc PMD driver Gagandeep Singh
2018-09-28  5:16     ` [dpdk-dev] [PATCH v3 1/3] net/enetc: enable Rx and Tx Gagandeep Singh
2018-09-28  5:16     ` [dpdk-dev] [PATCH v3 2/3] net/enetc: support packet parse type Gagandeep Singh
2018-09-28  5:16     ` [dpdk-dev] [PATCH v3 3/3] doc: add usage doc for ENETC PMD Gagandeep Singh
2018-09-28  5:26     ` [dpdk-dev] [PATCH v3 0/3] introduces the enetc PMD driver Gagandeep Singh
2018-09-28  7:45     ` [dpdk-dev] [PATCH v4 0/4] " Gagandeep Singh
2018-09-28  7:45       ` [dpdk-dev] [PATCH v4 1/4] net/enetc: add ENETC PMD with basic operations Gagandeep Singh
2018-10-01 15:58         ` Ferruh Yigit
2018-09-28  7:45       ` [dpdk-dev] [PATCH v4 2/4] net/enetc: enable Rx and Tx Gagandeep Singh
2018-10-01 15:59         ` Ferruh Yigit
2018-09-28  7:46       ` [dpdk-dev] [PATCH v4 3/4] net/enetc: support packet parse type Gagandeep Singh
2018-09-28 10:17         ` Shreyansh Jain
2018-10-01 15:59           ` Ferruh Yigit
2018-09-28  7:46       ` [dpdk-dev] [PATCH v4 4/4] doc: add usage doc for ENETC PMD Gagandeep Singh
2018-10-01 16:00         ` Ferruh Yigit
2018-09-28 10:36       ` [dpdk-dev] [PATCH v4 0/4] introduces the enetc PMD driver Shreyansh Jain
2018-10-03 13:36       ` [dpdk-dev] [PATCH v5 " Gagandeep Singh
2018-10-03 13:36         ` [dpdk-dev] [PATCH v5 1/4] net/enetc: add ENETC PMD with basic operations Gagandeep Singh
2018-10-03 19:47           ` Ferruh Yigit
2018-10-03 13:36         ` [dpdk-dev] [PATCH v5 2/4] net/enetc: enable Rx and Tx Gagandeep Singh
2018-10-03 13:36         ` [dpdk-dev] [PATCH v5 3/4] net/enetc: support packet parse type Gagandeep Singh
2018-10-03 13:36         ` [dpdk-dev] [PATCH v5 4/4] doc: add usage doc for ENETC PMD Gagandeep Singh
2018-10-03 19:47           ` Ferruh Yigit
2018-10-03 19:48         ` [dpdk-dev] [PATCH v5 0/4] introduces the enetc PMD driver Ferruh Yigit
2018-11-21 17:36           ` Ferruh Yigit
2018-11-22 10:34             ` Shreyansh Jain
2018-11-22 12:08               ` Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180913094201.17098-4-g.singh@nxp.com \
    --to=g.singh@nxp.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=pankaj.chauhan@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).