From: Yongseok Koh <yskoh@mellanox.com>
To: Thomas Monjalon <thomas@monjalon.net>,
Shahaf Shuler <shahafs@mellanox.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>, Ori Kam <orika@mellanox.com>
Subject: [dpdk-dev] [PATCH v2 01/11] net/mlx5: split flow validation to dedicated function
Date: Mon, 24 Sep 2018 19:50:06 +0000 [thread overview]
Message-ID: <20180924194951.18650-2-yskoh@mellanox.com> (raw)
In-Reply-To: <20180924194951.18650-1-yskoh@mellanox.com>
From: Ori Kam <orika@mellanox.com>
In current implementation the validation logic reside in the same function
that calculates the size of the verbs spec and also create the verbs spec.
This approach results in hard to maintain code which can't be shared.
also in current logic there is a use of parser entity that holds the
information between function calls. The main problem with this parser is
that it assumes the connection between different functions. For example
it assumes that the validation function was called and relevant values
were set. This may result in an issue if and when we for example only
call the validation function, or call the apply function without the
validation (Currently according to RTE flow we must call validation
before creating flow, but if we want to change that to save time during
flow creation, for example the user validated some rule and just want to
change the IP there is no true reason the validate the rule again).
This commit address both of those issues by extracting the validation logic
into detected functions and remove the use of the parser object.
The side effect of those changes is that in some cases there will be a
need to traverse the item list again.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
---
drivers/net/mlx5/mlx5_flow.c | 1889 +++++++++++++++++++++++++++---------------
1 file changed, 1224 insertions(+), 665 deletions(-)
diff --git a/drivers/net/mlx5/mlx5_flow.c b/drivers/net/mlx5/mlx5_flow.c
index 3f548a9a4..d214846c1 100644
--- a/drivers/net/mlx5/mlx5_flow.c
+++ b/drivers/net/mlx5/mlx5_flow.c
@@ -91,6 +91,14 @@ extern const struct eth_dev_ops mlx5_dev_ops_isolate;
#define MLX5_FLOW_MOD_MARK (1u << 1)
#define MLX5_FLOW_MOD_COUNT (1u << 2)
+/* Actions */
+#define MLX5_ACTION_DROP (1u << 0)
+#define MLX5_ACTION_QUEUE (1u << 1)
+#define MLX5_ACTION_RSS (1u << 2)
+#define MLX5_ACTION_FLAG (1u << 3)
+#define MLX5_ACTION_MARK (1u << 4)
+#define MLX5_ACTION_COUNT (1u << 5)
+
/* possible L3 layers protocols filtering. */
#define MLX5_IP_PROTOCOL_TCP 6
#define MLX5_IP_PROTOCOL_UDP 17
@@ -299,14 +307,12 @@ struct mlx5_flow_counter {
struct rte_flow {
TAILQ_ENTRY(rte_flow) next; /**< Pointer to the next flow structure. */
struct rte_flow_attr attributes; /**< User flow attribute. */
- uint32_t l3_protocol_en:1; /**< Protocol filtering requested. */
uint32_t layers;
/**< Bit-fields of present layers see MLX5_FLOW_LAYER_*. */
uint32_t modifier;
/**< Bit-fields of present modifier see MLX5_FLOW_MOD_*. */
uint32_t fate;
/**< Bit-fields of present fate see MLX5_FLOW_FATE_*. */
- uint8_t l3_protocol; /**< valid when l3_protocol_en is set. */
LIST_HEAD(verbs, mlx5_flow_verbs) verbs; /**< Verbs flows list. */
struct mlx5_flow_verbs *cur_verbs;
/**< Current Verbs flow structure being filled. */
@@ -582,52 +588,23 @@ mlx5_flow_counter_release(struct mlx5_flow_counter *counter)
* them in the @p flow if everything is correct.
*
* @param[in] dev
- * Pointer to Ethernet device.
+ * Pointer to Ethernet device structure.
* @param[in] attributes
* Pointer to flow attributes
* @param[in, out] flow
* Pointer to the rte_flow structure.
- * @param[out] error
- * Pointer to error structure.
*
* @return
- * 0 on success, a negative errno value otherwise and rte_errno is set.
+ * 0 on success.
*/
static int
mlx5_flow_attributes(struct rte_eth_dev *dev,
const struct rte_flow_attr *attributes,
- struct rte_flow *flow,
- struct rte_flow_error *error)
+ struct rte_flow *flow)
{
- uint32_t priority_max =
- ((struct priv *)dev->data->dev_private)->config.flow_prio - 1;
+ struct priv *priv = dev->data->dev_private;
+ uint32_t priority_max = priv->config.flow_prio - 1;
- if (attributes->group)
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ATTR_GROUP,
- NULL,
- "groups is not supported");
- if (attributes->priority != MLX5_FLOW_PRIO_RSVD &&
- attributes->priority >= priority_max)
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY,
- NULL,
- "priority out of range");
- if (attributes->egress)
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ATTR_EGRESS,
- NULL,
- "egress is not supported");
- if (attributes->transfer)
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ATTR_TRANSFER,
- NULL,
- "transfer is not supported");
- if (!attributes->ingress)
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
- NULL,
- "ingress attribute is mandatory");
flow->attributes = *attributes;
if (attributes->priority == MLX5_FLOW_PRIO_RSVD)
flow->attributes.priority = priority_max;
@@ -671,8 +648,7 @@ mlx5_flow_item_acceptable(const struct rte_flow_item *item,
" bits");
if (!item->spec && (item->mask || item->last))
return rte_flow_error_set(error, EINVAL,
- RTE_FLOW_ERROR_TYPE_ITEM,
- item,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
"mask/last without a spec is not"
" supported");
if (item->spec && item->last) {
@@ -762,8 +738,6 @@ mlx5_flow_verbs_hashfields_adjust(struct rte_flow *flow,
* @param[in] flow_size
* Size in bytes of the available space in @p flow, if too small, nothing is
* written.
- * @param[out] error
- * Pointer to error structure.
*
* @return
* On success the number of bytes consumed/necessary, if the returned value
@@ -773,37 +747,19 @@ mlx5_flow_verbs_hashfields_adjust(struct rte_flow *flow,
*/
static int
mlx5_flow_item_eth(const struct rte_flow_item *item, struct rte_flow *flow,
- const size_t flow_size, struct rte_flow_error *error)
+ const size_t flow_size)
{
const struct rte_flow_item_eth *spec = item->spec;
const struct rte_flow_item_eth *mask = item->mask;
- const struct rte_flow_item_eth nic_mask = {
- .dst.addr_bytes = "\xff\xff\xff\xff\xff\xff",
- .src.addr_bytes = "\xff\xff\xff\xff\xff\xff",
- .type = RTE_BE16(0xffff),
- };
const int tunnel = !!(flow->layers & MLX5_FLOW_LAYER_TUNNEL);
const unsigned int size = sizeof(struct ibv_flow_spec_eth);
struct ibv_flow_spec_eth eth = {
.type = IBV_FLOW_SPEC_ETH | (tunnel ? IBV_FLOW_SPEC_INNER : 0),
.size = size,
};
- int ret;
- if (flow->layers & (tunnel ? MLX5_FLOW_LAYER_INNER_L2 :
- MLX5_FLOW_LAYER_OUTER_L2))
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ITEM,
- item,
- "L2 layers already configured");
if (!mask)
mask = &rte_flow_item_eth_mask;
- ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
- (const uint8_t *)&nic_mask,
- sizeof(struct rte_flow_item_eth),
- error);
- if (ret)
- return ret;
flow->layers |= tunnel ? MLX5_FLOW_LAYER_INNER_L2 :
MLX5_FLOW_LAYER_OUTER_L2;
if (size > flow_size)
@@ -875,8 +831,6 @@ mlx5_flow_item_vlan_update(struct ibv_flow_attr *attr,
* @param[in] flow_size
* Size in bytes of the available space in @p flow, if too small, nothing is
* written.
- * @param[out] error
- * Pointer to error structure.
*
* @return
* On success the number of bytes consumed/necessary, if the returned value
@@ -886,47 +840,21 @@ mlx5_flow_item_vlan_update(struct ibv_flow_attr *attr,
*/
static int
mlx5_flow_item_vlan(const struct rte_flow_item *item, struct rte_flow *flow,
- const size_t flow_size, struct rte_flow_error *error)
+ const size_t flow_size)
{
const struct rte_flow_item_vlan *spec = item->spec;
const struct rte_flow_item_vlan *mask = item->mask;
- const struct rte_flow_item_vlan nic_mask = {
- .tci = RTE_BE16(0x0fff),
- .inner_type = RTE_BE16(0xffff),
- };
unsigned int size = sizeof(struct ibv_flow_spec_eth);
const int tunnel = !!(flow->layers & MLX5_FLOW_LAYER_TUNNEL);
struct ibv_flow_spec_eth eth = {
.type = IBV_FLOW_SPEC_ETH | (tunnel ? IBV_FLOW_SPEC_INNER : 0),
.size = size,
};
- int ret;
- const uint32_t l34m = tunnel ? (MLX5_FLOW_LAYER_INNER_L3 |
- MLX5_FLOW_LAYER_INNER_L4) :
- (MLX5_FLOW_LAYER_OUTER_L3 | MLX5_FLOW_LAYER_OUTER_L4);
- const uint32_t vlanm = tunnel ? MLX5_FLOW_LAYER_INNER_VLAN :
- MLX5_FLOW_LAYER_OUTER_VLAN;
const uint32_t l2m = tunnel ? MLX5_FLOW_LAYER_INNER_L2 :
MLX5_FLOW_LAYER_OUTER_L2;
- if (flow->layers & vlanm)
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ITEM,
- item,
- "VLAN layer already configured");
- else if ((flow->layers & l34m) != 0)
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ITEM,
- item,
- "L2 layer cannot follow L3/L4 layer");
if (!mask)
mask = &rte_flow_item_vlan_mask;
- ret = mlx5_flow_item_acceptable
- (item, (const uint8_t *)mask,
- (const uint8_t *)&nic_mask,
- sizeof(struct rte_flow_item_vlan), error);
- if (ret)
- return ret;
if (spec) {
eth.val.vlan_tag = spec->tci;
eth.mask.vlan_tag = mask->tci;
@@ -935,15 +863,6 @@ mlx5_flow_item_vlan(const struct rte_flow_item *item, struct rte_flow *flow,
eth.mask.ether_type = mask->inner_type;
eth.val.ether_type &= eth.mask.ether_type;
}
- /*
- * From verbs perspective an empty VLAN is equivalent
- * to a packet without VLAN layer.
- */
- if (!eth.mask.vlan_tag)
- return rte_flow_error_set(error, EINVAL,
- RTE_FLOW_ERROR_TYPE_ITEM_SPEC,
- item->spec,
- "VLAN cannot be empty");
if (!(flow->layers & l2m)) {
if (size <= flow_size) {
flow->cur_verbs->attr->priority = MLX5_PRIORITY_MAP_L2;
@@ -974,29 +893,18 @@ mlx5_flow_item_vlan(const struct rte_flow_item *item, struct rte_flow *flow,
* @param[in] flow_size
* Size in bytes of the available space in @p flow, if too small, nothing is
* written.
- * @param[out] error
- * Pointer to error structure.
*
* @return
* On success the number of bytes consumed/necessary, if the returned value
* is lesser or equal to @p flow_size, the @p item has fully been converted,
* otherwise another call with this returned memory size should be done.
- * On error, a negative errno value is returned and rte_errno is set.
*/
static int
mlx5_flow_item_ipv4(const struct rte_flow_item *item, struct rte_flow *flow,
- const size_t flow_size, struct rte_flow_error *error)
+ const size_t flow_size)
{
const struct rte_flow_item_ipv4 *spec = item->spec;
const struct rte_flow_item_ipv4 *mask = item->mask;
- const struct rte_flow_item_ipv4 nic_mask = {
- .hdr = {
- .src_addr = RTE_BE32(0xffffffff),
- .dst_addr = RTE_BE32(0xffffffff),
- .type_of_service = 0xff,
- .next_proto_id = 0xff,
- },
- };
const int tunnel = !!(flow->layers & MLX5_FLOW_LAYER_TUNNEL);
unsigned int size = sizeof(struct ibv_flow_spec_ipv4_ext);
struct ibv_flow_spec_ipv4_ext ipv4 = {
@@ -1004,28 +912,9 @@ mlx5_flow_item_ipv4(const struct rte_flow_item *item, struct rte_flow *flow,
(tunnel ? IBV_FLOW_SPEC_INNER : 0),
.size = size,
};
- int ret;
- if (flow->layers & (tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
- MLX5_FLOW_LAYER_OUTER_L3))
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ITEM,
- item,
- "multiple L3 layers not supported");
- else if (flow->layers & (tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
- MLX5_FLOW_LAYER_OUTER_L4))
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ITEM,
- item,
- "L3 cannot follow an L4 layer.");
if (!mask)
mask = &rte_flow_item_ipv4_mask;
- ret = mlx5_flow_item_acceptable
- (item, (const uint8_t *)mask,
- (const uint8_t *)&nic_mask,
- sizeof(struct rte_flow_item_ipv4), error);
- if (ret < 0)
- return ret;
flow->layers |= tunnel ? MLX5_FLOW_LAYER_INNER_L3_IPV4 :
MLX5_FLOW_LAYER_OUTER_L3_IPV4;
if (spec) {
@@ -1047,8 +936,6 @@ mlx5_flow_item_ipv4(const struct rte_flow_item *item, struct rte_flow *flow,
ipv4.val.proto &= ipv4.mask.proto;
ipv4.val.tos &= ipv4.mask.tos;
}
- flow->l3_protocol_en = !!ipv4.mask.proto;
- flow->l3_protocol = ipv4.val.proto;
if (size <= flow_size) {
mlx5_flow_verbs_hashfields_adjust
(flow, tunnel,
@@ -1076,74 +963,27 @@ mlx5_flow_item_ipv4(const struct rte_flow_item *item, struct rte_flow *flow,
* @param[in] flow_size
* Size in bytes of the available space in @p flow, if too small, nothing is
* written.
- * @param[out] error
- * Pointer to error structure.
*
* @return
* On success the number of bytes consumed/necessary, if the returned value
* is lesser or equal to @p flow_size, the @p item has fully been converted,
* otherwise another call with this returned memory size should be done.
- * On error, a negative errno value is returned and rte_errno is set.
*/
static int
mlx5_flow_item_ipv6(const struct rte_flow_item *item, struct rte_flow *flow,
- const size_t flow_size, struct rte_flow_error *error)
+ const size_t flow_size)
{
const struct rte_flow_item_ipv6 *spec = item->spec;
const struct rte_flow_item_ipv6 *mask = item->mask;
- const struct rte_flow_item_ipv6 nic_mask = {
- .hdr = {
- .src_addr =
- "\xff\xff\xff\xff\xff\xff\xff\xff"
- "\xff\xff\xff\xff\xff\xff\xff\xff",
- .dst_addr =
- "\xff\xff\xff\xff\xff\xff\xff\xff"
- "\xff\xff\xff\xff\xff\xff\xff\xff",
- .vtc_flow = RTE_BE32(0xffffffff),
- .proto = 0xff,
- .hop_limits = 0xff,
- },
- };
const int tunnel = !!(flow->layers & MLX5_FLOW_LAYER_TUNNEL);
unsigned int size = sizeof(struct ibv_flow_spec_ipv6);
struct ibv_flow_spec_ipv6 ipv6 = {
.type = IBV_FLOW_SPEC_IPV6 | (tunnel ? IBV_FLOW_SPEC_INNER : 0),
.size = size,
};
- int ret;
- if (flow->layers & (tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
- MLX5_FLOW_LAYER_OUTER_L3))
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ITEM,
- item,
- "multiple L3 layers not supported");
- else if (flow->layers & (tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
- MLX5_FLOW_LAYER_OUTER_L4))
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ITEM,
- item,
- "L3 cannot follow an L4 layer.");
- /*
- * IPv6 is not recognised by the NIC inside a GRE tunnel.
- * Such support has to be disabled as the rule will be
- * accepted. Issue reproduced with Mellanox OFED 4.3-3.0.2.1 and
- * Mellanox OFED 4.4-1.0.0.0.
- */
- if (tunnel && flow->layers & MLX5_FLOW_LAYER_GRE)
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ITEM,
- item,
- "IPv6 inside a GRE tunnel is"
- " not recognised.");
if (!mask)
mask = &rte_flow_item_ipv6_mask;
- ret = mlx5_flow_item_acceptable
- (item, (const uint8_t *)mask,
- (const uint8_t *)&nic_mask,
- sizeof(struct rte_flow_item_ipv6), error);
- if (ret < 0)
- return ret;
flow->layers |= tunnel ? MLX5_FLOW_LAYER_INNER_L3_IPV6 :
MLX5_FLOW_LAYER_OUTER_L3_IPV6;
if (spec) {
@@ -1185,8 +1025,6 @@ mlx5_flow_item_ipv6(const struct rte_flow_item *item, struct rte_flow *flow,
ipv6.val.next_hdr &= ipv6.mask.next_hdr;
ipv6.val.hop_limit &= ipv6.mask.hop_limit;
}
- flow->l3_protocol_en = !!ipv6.mask.next_hdr;
- flow->l3_protocol = ipv6.val.next_hdr;
if (size <= flow_size) {
mlx5_flow_verbs_hashfields_adjust
(flow, tunnel,
@@ -1214,18 +1052,15 @@ mlx5_flow_item_ipv6(const struct rte_flow_item *item, struct rte_flow *flow,
* @param[in] flow_size
* Size in bytes of the available space in @p flow, if too small, nothing is
* written.
- * @param[out] error
- * Pointer to error structure.
*
* @return
* On success the number of bytes consumed/necessary, if the returned value
* is lesser or equal to @p flow_size, the @p item has fully been converted,
* otherwise another call with this returned memory size should be done.
- * On error, a negative errno value is returned and rte_errno is set.
*/
static int
mlx5_flow_item_udp(const struct rte_flow_item *item, struct rte_flow *flow,
- const size_t flow_size, struct rte_flow_error *error)
+ const size_t flow_size)
{
const struct rte_flow_item_udp *spec = item->spec;
const struct rte_flow_item_udp *mask = item->mask;
@@ -1235,36 +1070,9 @@ mlx5_flow_item_udp(const struct rte_flow_item *item, struct rte_flow *flow,
.type = IBV_FLOW_SPEC_UDP | (tunnel ? IBV_FLOW_SPEC_INNER : 0),
.size = size,
};
- int ret;
- if (flow->l3_protocol_en && flow->l3_protocol != MLX5_IP_PROTOCOL_UDP)
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ITEM,
- item,
- "protocol filtering not compatible"
- " with UDP layer");
- if (!(flow->layers & (tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
- MLX5_FLOW_LAYER_OUTER_L3)))
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ITEM,
- item,
- "L3 is mandatory to filter"
- " on L4");
- if (flow->layers & (tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
- MLX5_FLOW_LAYER_OUTER_L4))
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ITEM,
- item,
- "L4 layer is already"
- " present");
if (!mask)
mask = &rte_flow_item_udp_mask;
- ret = mlx5_flow_item_acceptable
- (item, (const uint8_t *)mask,
- (const uint8_t *)&rte_flow_item_udp_mask,
- sizeof(struct rte_flow_item_udp), error);
- if (ret < 0)
- return ret;
flow->layers |= tunnel ? MLX5_FLOW_LAYER_INNER_L4_UDP :
MLX5_FLOW_LAYER_OUTER_L4_UDP;
if (spec) {
@@ -1306,11 +1114,10 @@ mlx5_flow_item_udp(const struct rte_flow_item *item, struct rte_flow *flow,
* On success the number of bytes consumed/necessary, if the returned value
* is lesser or equal to @p flow_size, the @p item has fully been converted,
* otherwise another call with this returned memory size should be done.
- * On error, a negative errno value is returned and rte_errno is set.
*/
static int
mlx5_flow_item_tcp(const struct rte_flow_item *item, struct rte_flow *flow,
- const size_t flow_size, struct rte_flow_error *error)
+ const size_t flow_size)
{
const struct rte_flow_item_tcp *spec = item->spec;
const struct rte_flow_item_tcp *mask = item->mask;
@@ -1320,34 +1127,9 @@ mlx5_flow_item_tcp(const struct rte_flow_item *item, struct rte_flow *flow,
.type = IBV_FLOW_SPEC_TCP | (tunnel ? IBV_FLOW_SPEC_INNER : 0),
.size = size,
};
- int ret;
- if (flow->l3_protocol_en && flow->l3_protocol != MLX5_IP_PROTOCOL_TCP)
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ITEM,
- item,
- "protocol filtering not compatible"
- " with TCP layer");
- if (!(flow->layers & (tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
- MLX5_FLOW_LAYER_OUTER_L3)))
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ITEM,
- item,
- "L3 is mandatory to filter on L4");
- if (flow->layers & (tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
- MLX5_FLOW_LAYER_OUTER_L4))
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ITEM,
- item,
- "L4 layer is already present");
if (!mask)
mask = &rte_flow_item_tcp_mask;
- ret = mlx5_flow_item_acceptable
- (item, (const uint8_t *)mask,
- (const uint8_t *)&rte_flow_item_tcp_mask,
- sizeof(struct rte_flow_item_tcp), error);
- if (ret < 0)
- return ret;
flow->layers |= tunnel ? MLX5_FLOW_LAYER_INNER_L4_TCP :
MLX5_FLOW_LAYER_OUTER_L4_TCP;
if (spec) {
@@ -1389,11 +1171,10 @@ mlx5_flow_item_tcp(const struct rte_flow_item *item, struct rte_flow *flow,
* On success the number of bytes consumed/necessary, if the returned value
* is lesser or equal to @p flow_size, the @p item has fully been converted,
* otherwise another call with this returned memory size should be done.
- * On error, a negative errno value is returned and rte_errno is set.
*/
static int
mlx5_flow_item_vxlan(const struct rte_flow_item *item, struct rte_flow *flow,
- const size_t flow_size, struct rte_flow_error *error)
+ const size_t flow_size)
{
const struct rte_flow_item_vxlan *spec = item->spec;
const struct rte_flow_item_vxlan *mask = item->mask;
@@ -1402,34 +1183,13 @@ mlx5_flow_item_vxlan(const struct rte_flow_item *item, struct rte_flow *flow,
.type = IBV_FLOW_SPEC_VXLAN_TUNNEL,
.size = size,
};
- int ret;
union vni {
uint32_t vlan_id;
uint8_t vni[4];
} id = { .vlan_id = 0, };
- if (flow->layers & MLX5_FLOW_LAYER_TUNNEL)
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ITEM,
- item,
- "a tunnel is already present");
- /*
- * Verify only UDPv4 is present as defined in
- * https://tools.ietf.org/html/rfc7348
- */
- if (!(flow->layers & MLX5_FLOW_LAYER_OUTER_L4_UDP))
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ITEM,
- item,
- "no outer UDP layer found");
if (!mask)
mask = &rte_flow_item_vxlan_mask;
- ret = mlx5_flow_item_acceptable
- (item, (const uint8_t *)mask,
- (const uint8_t *)&rte_flow_item_vxlan_mask,
- sizeof(struct rte_flow_item_vxlan), error);
- if (ret < 0)
- return ret;
if (spec) {
memcpy(&id.vni[1], spec->vni, 3);
vxlan.val.tunnel_id = id.vlan_id;
@@ -1438,25 +1198,6 @@ mlx5_flow_item_vxlan(const struct rte_flow_item *item, struct rte_flow *flow,
/* Remove unwanted bits from values. */
vxlan.val.tunnel_id &= vxlan.mask.tunnel_id;
}
- /*
- * Tunnel id 0 is equivalent as not adding a VXLAN layer, if
- * only this layer is defined in the Verbs specification it is
- * interpreted as wildcard and all packets will match this
- * rule, if it follows a full stack layer (ex: eth / ipv4 /
- * udp), all packets matching the layers before will also
- * match this rule. To avoid such situation, VNI 0 is
- * currently refused.
- */
- if (!vxlan.val.tunnel_id)
- return rte_flow_error_set(error, EINVAL,
- RTE_FLOW_ERROR_TYPE_ITEM,
- item,
- "VXLAN vni cannot be 0");
- if (!(flow->layers & MLX5_FLOW_LAYER_OUTER))
- return rte_flow_error_set(error, EINVAL,
- RTE_FLOW_ERROR_TYPE_ITEM,
- item,
- "VXLAN tunnel must be fully defined");
if (size <= flow_size) {
mlx5_flow_spec_verbs_add(flow, &vxlan, size);
flow->cur_verbs->attr->priority = MLX5_PRIORITY_MAP_L2;
@@ -1471,8 +1212,6 @@ mlx5_flow_item_vxlan(const struct rte_flow_item *item, struct rte_flow *flow,
* If the necessary size for the conversion is greater than the @p flow_size,
* nothing is written in @p flow, the validation is still performed.
*
- * @param dev
- * Pointer to Ethernet device.
* @param[in] item
* Item specification.
* @param[in, out] flow
@@ -1487,13 +1226,10 @@ mlx5_flow_item_vxlan(const struct rte_flow_item *item, struct rte_flow *flow,
* On success the number of bytes consumed/necessary, if the returned value
* is lesser or equal to @p flow_size, the @p item has fully been converted,
* otherwise another call with this returned memory size should be done.
- * On error, a negative errno value is returned and rte_errno is set.
*/
static int
-mlx5_flow_item_vxlan_gpe(struct rte_eth_dev *dev,
- const struct rte_flow_item *item,
- struct rte_flow *flow, const size_t flow_size,
- struct rte_flow_error *error)
+mlx5_flow_item_vxlan_gpe(const struct rte_flow_item *item,
+ struct rte_flow *flow, const size_t flow_size)
{
const struct rte_flow_item_vxlan_gpe *spec = item->spec;
const struct rte_flow_item_vxlan_gpe *mask = item->mask;
@@ -1502,74 +1238,21 @@ mlx5_flow_item_vxlan_gpe(struct rte_eth_dev *dev,
.type = IBV_FLOW_SPEC_VXLAN_TUNNEL,
.size = size,
};
- int ret;
union vni {
uint32_t vlan_id;
uint8_t vni[4];
} id = { .vlan_id = 0, };
- if (!((struct priv *)dev->data->dev_private)->config.l3_vxlan_en)
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ITEM,
- item,
- "L3 VXLAN is not enabled by device"
- " parameter and/or not configured in"
- " firmware");
- if (flow->layers & MLX5_FLOW_LAYER_TUNNEL)
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ITEM,
- item,
- "a tunnel is already present");
- /*
- * Verify only UDPv4 is present as defined in
- * https://tools.ietf.org/html/rfc7348
- */
- if (!(flow->layers & MLX5_FLOW_LAYER_OUTER_L4_UDP))
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ITEM,
- item,
- "no outer UDP layer found");
if (!mask)
mask = &rte_flow_item_vxlan_gpe_mask;
- ret = mlx5_flow_item_acceptable
- (item, (const uint8_t *)mask,
- (const uint8_t *)&rte_flow_item_vxlan_gpe_mask,
- sizeof(struct rte_flow_item_vxlan_gpe), error);
- if (ret < 0)
- return ret;
if (spec) {
memcpy(&id.vni[1], spec->vni, 3);
vxlan_gpe.val.tunnel_id = id.vlan_id;
memcpy(&id.vni[1], mask->vni, 3);
vxlan_gpe.mask.tunnel_id = id.vlan_id;
- if (spec->protocol)
- return rte_flow_error_set
- (error, EINVAL,
- RTE_FLOW_ERROR_TYPE_ITEM,
- item,
- "VxLAN-GPE protocol not supported");
/* Remove unwanted bits from values. */
vxlan_gpe.val.tunnel_id &= vxlan_gpe.mask.tunnel_id;
}
- /*
- * Tunnel id 0 is equivalent as not adding a VXLAN layer, if only this
- * layer is defined in the Verbs specification it is interpreted as
- * wildcard and all packets will match this rule, if it follows a full
- * stack layer (ex: eth / ipv4 / udp), all packets matching the layers
- * before will also match this rule. To avoid such situation, VNI 0
- * is currently refused.
- */
- if (!vxlan_gpe.val.tunnel_id)
- return rte_flow_error_set(error, EINVAL,
- RTE_FLOW_ERROR_TYPE_ITEM,
- item,
- "VXLAN-GPE vni cannot be 0");
- if (!(flow->layers & MLX5_FLOW_LAYER_OUTER))
- return rte_flow_error_set(error, EINVAL,
- RTE_FLOW_ERROR_TYPE_ITEM,
- item,
- "VXLAN-GPE tunnel must be fully"
- " defined");
if (size <= flow_size) {
mlx5_flow_spec_verbs_add(flow, &vxlan_gpe, size);
flow->cur_verbs->attr->priority = MLX5_PRIORITY_MAP_L2;
@@ -1647,24 +1330,20 @@ mlx5_flow_item_gre_ip_protocol_update(struct ibv_flow_attr *attr,
* @param[in] flow_size
* Size in bytes of the available space in @p flow, if too small, nothing is
* written.
- * @param[out] error
- * Pointer to error structure.
*
* @return
* On success the number of bytes consumed/necessary, if the returned value
* is lesser or equal to @p flow_size, the @p item has fully been converted,
* otherwise another call with this returned memory size should be done.
- * On error, a negative errno value is returned and rte_errno is set.
*/
static int
-mlx5_flow_item_gre(const struct rte_flow_item *item,
- struct rte_flow *flow, const size_t flow_size,
- struct rte_flow_error *error)
+mlx5_flow_item_gre(const struct rte_flow_item *item __rte_unused,
+ struct rte_flow *flow, const size_t flow_size)
{
struct mlx5_flow_verbs *verbs = flow->cur_verbs;
+#ifdef HAVE_IBV_DEVICE_MPLS_SUPPORT
const struct rte_flow_item_gre *spec = item->spec;
const struct rte_flow_item_gre *mask = item->mask;
-#ifdef HAVE_IBV_DEVICE_MPLS_SUPPORT
unsigned int size = sizeof(struct ibv_flow_spec_gre);
struct ibv_flow_spec_gre tunnel = {
.type = IBV_FLOW_SPEC_GRE,
@@ -1677,33 +1356,10 @@ mlx5_flow_item_gre(const struct rte_flow_item *item,
.size = size,
};
#endif
- int ret;
- if (flow->l3_protocol_en && flow->l3_protocol != MLX5_IP_PROTOCOL_GRE)
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ITEM,
- item,
- "protocol filtering not compatible"
- " with this GRE layer");
- if (flow->layers & MLX5_FLOW_LAYER_TUNNEL)
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ITEM,
- item,
- "a tunnel is already present");
- if (!(flow->layers & MLX5_FLOW_LAYER_OUTER_L3))
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ITEM,
- item,
- "L3 Layer is missing");
+#ifdef HAVE_IBV_DEVICE_MPLS_SUPPORT
if (!mask)
mask = &rte_flow_item_gre_mask;
- ret = mlx5_flow_item_acceptable
- (item, (const uint8_t *)mask,
- (const uint8_t *)&rte_flow_item_gre_mask,
- sizeof(struct rte_flow_item_gre), error);
- if (ret < 0)
- return ret;
-#ifdef HAVE_IBV_DEVICE_MPLS_SUPPORT
if (spec) {
tunnel.val.c_ks_res0_ver = spec->c_rsvd0_ver;
tunnel.val.protocol = spec->protocol;
@@ -1715,13 +1371,6 @@ mlx5_flow_item_gre(const struct rte_flow_item *item,
tunnel.val.key &= tunnel.mask.key;
}
#else
- if (spec && (spec->protocol & mask->protocol))
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ITEM,
- item,
- "without MPLS support the"
- " specification cannot be used for"
- " filtering");
#endif /* !HAVE_IBV_DEVICE_MPLS_SUPPORT */
if (size <= flow_size) {
if (flow->layers & MLX5_FLOW_LAYER_OUTER_L3_IPV4)
@@ -1775,30 +1424,9 @@ mlx5_flow_item_mpls(const struct rte_flow_item *item __rte_unused,
.type = IBV_FLOW_SPEC_MPLS,
.size = size,
};
- int ret;
- if (flow->l3_protocol_en && flow->l3_protocol != MLX5_IP_PROTOCOL_MPLS)
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ITEM,
- item,
- "protocol filtering not compatible"
- " with MPLS layer");
- /* Multi-tunnel isn't allowed but MPLS over GRE is an exception. */
- if (flow->layers & MLX5_FLOW_LAYER_TUNNEL &&
- (flow->layers & MLX5_FLOW_LAYER_GRE) != MLX5_FLOW_LAYER_GRE)
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ITEM,
- item,
- "a tunnel is already"
- " present");
if (!mask)
mask = &rte_flow_item_mpls_mask;
- ret = mlx5_flow_item_acceptable
- (item, (const uint8_t *)mask,
- (const uint8_t *)&rte_flow_item_mpls_mask,
- sizeof(struct rte_flow_item_mpls), error);
- if (ret < 0)
- return ret;
if (spec) {
memcpy(&mpls.val.label, spec, sizeof(mpls.val.label));
memcpy(&mpls.mask.label, mask, sizeof(mpls.mask.label));
@@ -1845,8 +1473,7 @@ mlx5_flow_item_mpls(const struct rte_flow_item *item __rte_unused,
* On error, a negative errno value is returned and rte_errno is set.
*/
static int
-mlx5_flow_items(struct rte_eth_dev *dev,
- const struct rte_flow_item pattern[],
+mlx5_flow_items(const struct rte_flow_item pattern[],
struct rte_flow *flow, const size_t flow_size,
struct rte_flow_error *error)
{
@@ -1860,33 +1487,32 @@ mlx5_flow_items(struct rte_eth_dev *dev,
case RTE_FLOW_ITEM_TYPE_VOID:
break;
case RTE_FLOW_ITEM_TYPE_ETH:
- ret = mlx5_flow_item_eth(pattern, flow, remain, error);
+ ret = mlx5_flow_item_eth(pattern, flow, remain);
break;
case RTE_FLOW_ITEM_TYPE_VLAN:
- ret = mlx5_flow_item_vlan(pattern, flow, remain, error);
+ ret = mlx5_flow_item_vlan(pattern, flow, remain);
break;
case RTE_FLOW_ITEM_TYPE_IPV4:
- ret = mlx5_flow_item_ipv4(pattern, flow, remain, error);
+ ret = mlx5_flow_item_ipv4(pattern, flow, remain);
break;
case RTE_FLOW_ITEM_TYPE_IPV6:
- ret = mlx5_flow_item_ipv6(pattern, flow, remain, error);
+ ret = mlx5_flow_item_ipv6(pattern, flow, remain);
break;
case RTE_FLOW_ITEM_TYPE_UDP:
- ret = mlx5_flow_item_udp(pattern, flow, remain, error);
+ ret = mlx5_flow_item_udp(pattern, flow, remain);
break;
case RTE_FLOW_ITEM_TYPE_TCP:
- ret = mlx5_flow_item_tcp(pattern, flow, remain, error);
+ ret = mlx5_flow_item_tcp(pattern, flow, remain);
break;
case RTE_FLOW_ITEM_TYPE_VXLAN:
- ret = mlx5_flow_item_vxlan(pattern, flow, remain,
- error);
+ ret = mlx5_flow_item_vxlan(pattern, flow, remain);
break;
case RTE_FLOW_ITEM_TYPE_VXLAN_GPE:
- ret = mlx5_flow_item_vxlan_gpe(dev, pattern, flow,
- remain, error);
+ ret = mlx5_flow_item_vxlan_gpe(pattern, flow,
+ remain);
break;
case RTE_FLOW_ITEM_TYPE_GRE:
- ret = mlx5_flow_item_gre(pattern, flow, remain, error);
+ ret = mlx5_flow_item_gre(pattern, flow, remain);
break;
case RTE_FLOW_ITEM_TYPE_MPLS:
ret = mlx5_flow_item_mpls(pattern, flow, remain, error);
@@ -1910,7 +1536,7 @@ mlx5_flow_items(struct rte_eth_dev *dev,
.type = RTE_FLOW_ITEM_TYPE_ETH,
};
- return mlx5_flow_item_eth(&item, flow, flow_size, error);
+ return mlx5_flow_item_eth(&item, flow, flow_size);
}
return size;
}
@@ -1921,15 +1547,11 @@ mlx5_flow_items(struct rte_eth_dev *dev,
* If the necessary size for the conversion is greater than the @p flow_size,
* nothing is written in @p flow, the validation is still performed.
*
- * @param[in] action
- * Action configuration.
* @param[in, out] flow
* Pointer to flow structure.
* @param[in] flow_size
* Size in bytes of the available space in @p flow, if too small, nothing is
* written.
- * @param[out] error
- * Pointer to error structure.
*
* @return
* On success the number of bytes consumed/necessary, if the returned value
@@ -1939,9 +1561,7 @@ mlx5_flow_items(struct rte_eth_dev *dev,
* On error, a negative errno value is returned and rte_errno is set.
*/
static int
-mlx5_flow_action_drop(const struct rte_flow_action *action,
- struct rte_flow *flow, const size_t flow_size,
- struct rte_flow_error *error)
+mlx5_flow_action_drop(struct rte_flow *flow, const size_t flow_size)
{
unsigned int size = sizeof(struct ibv_flow_spec_action_drop);
struct ibv_flow_spec_action_drop drop = {
@@ -1949,18 +1569,6 @@ mlx5_flow_action_drop(const struct rte_flow_action *action,
.size = size,
};
- if (flow->fate)
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ACTION,
- action,
- "multiple fate actions are not"
- " supported");
- if (flow->modifier & (MLX5_FLOW_MOD_FLAG | MLX5_FLOW_MOD_MARK))
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ACTION,
- action,
- "drop is not compatible with"
- " flag/mark action");
if (size < flow_size)
mlx5_flow_spec_verbs_add(flow, &drop, size);
flow->fate |= MLX5_FLOW_FATE_DROP;
@@ -1971,43 +1579,20 @@ mlx5_flow_action_drop(const struct rte_flow_action *action,
* Convert the @p action into @p flow after ensuring the NIC will understand
* and process it correctly.
*
- * @param[in] dev
- * Pointer to Ethernet device structure.
* @param[in] action
* Action configuration.
* @param[in, out] flow
* Pointer to flow structure.
- * @param[out] error
- * Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
-mlx5_flow_action_queue(struct rte_eth_dev *dev,
- const struct rte_flow_action *action,
- struct rte_flow *flow,
- struct rte_flow_error *error)
+mlx5_flow_action_queue(const struct rte_flow_action *action,
+ struct rte_flow *flow)
{
- struct priv *priv = dev->data->dev_private;
const struct rte_flow_action_queue *queue = action->conf;
- if (flow->fate)
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ACTION,
- action,
- "multiple fate actions are not"
- " supported");
- if (queue->index >= priv->rxqs_n)
- return rte_flow_error_set(error, EINVAL,
- RTE_FLOW_ERROR_TYPE_ACTION_CONF,
- &queue->index,
- "queue index out of range");
- if (!(*priv->rxqs)[queue->index])
- return rte_flow_error_set(error, EINVAL,
- RTE_FLOW_ERROR_TYPE_ACTION_CONF,
- &queue->index,
- "queue is not configured");
if (flow->queue)
(*flow->queue)[0] = queue->index;
flow->rss.queue_num = 1;
@@ -2018,90 +1603,20 @@ mlx5_flow_action_queue(struct rte_eth_dev *dev,
/**
* Ensure the @p action will be understood and used correctly by the NIC.
*
- * @param dev
- * Pointer to Ethernet device structure.
- * @param action[in]
- * Pointer to flow actions array.
+ * @param[in] action
+ * Action configuration.
* @param flow[in, out]
* Pointer to the rte_flow structure.
- * @param error[in, out]
- * Pointer to error structure.
*
* @return
- * On success @p flow->queue array and @p flow->rss are filled and valid.
- * On error, a negative errno value is returned and rte_errno is set.
+ * 0 On success.
*/
static int
-mlx5_flow_action_rss(struct rte_eth_dev *dev,
- const struct rte_flow_action *action,
- struct rte_flow *flow,
- struct rte_flow_error *error)
+mlx5_flow_action_rss(const struct rte_flow_action *action,
+ struct rte_flow *flow)
{
- struct priv *priv = dev->data->dev_private;
const struct rte_flow_action_rss *rss = action->conf;
- unsigned int i;
- if (flow->fate)
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ACTION,
- action,
- "multiple fate actions are not"
- " supported");
- if (rss->func != RTE_ETH_HASH_FUNCTION_DEFAULT &&
- rss->func != RTE_ETH_HASH_FUNCTION_TOEPLITZ)
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ACTION_CONF,
- &rss->func,
- "RSS hash function not supported");
-#ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
- if (rss->level > 2)
-#else
- if (rss->level > 1)
-#endif
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ACTION_CONF,
- &rss->level,
- "tunnel RSS is not supported");
- if (rss->key_len < MLX5_RSS_HASH_KEY_LEN)
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ACTION_CONF,
- &rss->key_len,
- "RSS hash key too small");
- if (rss->key_len > MLX5_RSS_HASH_KEY_LEN)
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ACTION_CONF,
- &rss->key_len,
- "RSS hash key too large");
- if (!rss->queue_num)
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ACTION_CONF,
- rss,
- "no queues were provided for RSS");
- if (rss->queue_num > priv->config.ind_table_max_size)
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ACTION_CONF,
- &rss->queue_num,
- "number of queues too large");
- if (rss->types & MLX5_RSS_HF_MASK)
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ACTION_CONF,
- &rss->types,
- "some RSS protocols are not"
- " supported");
- for (i = 0; i != rss->queue_num; ++i) {
- if (rss->queue[i] >= priv->rxqs_n)
- return rte_flow_error_set
- (error, EINVAL,
- RTE_FLOW_ERROR_TYPE_ACTION_CONF,
- rss,
- "queue index out of range");
- if (!(*priv->rxqs)[rss->queue[i]])
- return rte_flow_error_set
- (error, EINVAL,
- RTE_FLOW_ERROR_TYPE_ACTION_CONF,
- &rss->queue[i],
- "queue is not configured");
- }
if (flow->queue)
memcpy((*flow->queue), rss->queue,
rss->queue_num * sizeof(uint16_t));
@@ -2119,27 +1634,20 @@ mlx5_flow_action_rss(struct rte_eth_dev *dev,
* If the necessary size for the conversion is greater than the @p flow_size,
* nothing is written in @p flow, the validation is still performed.
*
- * @param[in] action
- * Action configuration.
* @param[in, out] flow
* Pointer to flow structure.
* @param[in] flow_size
* Size in bytes of the available space in @p flow, if too small, nothing is
* written.
- * @param[out] error
- * Pointer to error structure.
*
* @return
* On success the number of bytes consumed/necessary, if the returned value
* is lesser or equal to @p flow_size, the @p action has fully been
* converted, otherwise another call with this returned memory size should
* be done.
- * On error, a negative errno value is returned and rte_errno is set.
*/
static int
-mlx5_flow_action_flag(const struct rte_flow_action *action,
- struct rte_flow *flow, const size_t flow_size,
- struct rte_flow_error *error)
+mlx5_flow_action_flag(struct rte_flow *flow, const size_t flow_size)
{
unsigned int size = sizeof(struct ibv_flow_spec_action_tag);
struct ibv_flow_spec_action_tag tag = {
@@ -2149,17 +1657,6 @@ mlx5_flow_action_flag(const struct rte_flow_action *action,
};
struct mlx5_flow_verbs *verbs = flow->cur_verbs;
- if (flow->modifier & MLX5_FLOW_MOD_FLAG)
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ACTION,
- action,
- "flag action already present");
- if (flow->fate & MLX5_FLOW_FATE_DROP)
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ACTION,
- action,
- "flag is not compatible with drop"
- " action");
if (flow->modifier & MLX5_FLOW_MOD_MARK)
size = 0;
else if (size <= flow_size && verbs)
@@ -2213,20 +1710,16 @@ mlx5_flow_verbs_mark_update(struct mlx5_flow_verbs *verbs, uint32_t mark_id)
* @param[in] flow_size
* Size in bytes of the available space in @p flow, if too small, nothing is
* written.
- * @param[out] error
- * Pointer to error structure.
*
* @return
* On success the number of bytes consumed/necessary, if the returned value
* is lesser or equal to @p flow_size, the @p action has fully been
* converted, otherwise another call with this returned memory size should
* be done.
- * On error, a negative errno value is returned and rte_errno is set.
*/
static int
mlx5_flow_action_mark(const struct rte_flow_action *action,
- struct rte_flow *flow, const size_t flow_size,
- struct rte_flow_error *error)
+ struct rte_flow *flow, const size_t flow_size)
{
const struct rte_flow_action_mark *mark = action->conf;
unsigned int size = sizeof(struct ibv_flow_spec_action_tag);
@@ -2236,28 +1729,6 @@ mlx5_flow_action_mark(const struct rte_flow_action *action,
};
struct mlx5_flow_verbs *verbs = flow->cur_verbs;
- if (!mark)
- return rte_flow_error_set(error, EINVAL,
- RTE_FLOW_ERROR_TYPE_ACTION,
- action,
- "configuration cannot be null");
- if (mark->id >= MLX5_FLOW_MARK_MAX)
- return rte_flow_error_set(error, EINVAL,
- RTE_FLOW_ERROR_TYPE_ACTION_CONF,
- &mark->id,
- "mark id must in 0 <= id < "
- RTE_STR(MLX5_FLOW_MARK_MAX));
- if (flow->modifier & MLX5_FLOW_MOD_MARK)
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ACTION,
- action,
- "mark action already present");
- if (flow->fate & MLX5_FLOW_FATE_DROP)
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ACTION,
- action,
- "mark is not compatible with drop"
- " action");
if (flow->modifier & MLX5_FLOW_MOD_FLAG) {
mlx5_flow_verbs_mark_update(verbs, mark->id);
size = 0;
@@ -2318,11 +1789,6 @@ mlx5_flow_action_count(struct rte_eth_dev *dev,
"cannot get counter"
" context.");
}
- if (!((struct priv *)dev->data->dev_private)->config.flow_counter_en)
- return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ACTION,
- action,
- "flow counters are not supported.");
flow->modifier |= MLX5_FLOW_MOD_COUNT;
#ifdef HAVE_IBV_DEVICE_COUNTERS_SET_SUPPORT
counter.counter_set_handle = flow->counter->cs->handle;
@@ -2375,22 +1841,19 @@ mlx5_flow_actions(struct rte_eth_dev *dev,
case RTE_FLOW_ACTION_TYPE_VOID:
break;
case RTE_FLOW_ACTION_TYPE_FLAG:
- ret = mlx5_flow_action_flag(actions, flow, remain,
- error);
+ ret = mlx5_flow_action_flag(flow, remain);
break;
case RTE_FLOW_ACTION_TYPE_MARK:
- ret = mlx5_flow_action_mark(actions, flow, remain,
- error);
+ ret = mlx5_flow_action_mark(actions, flow, remain);
break;
case RTE_FLOW_ACTION_TYPE_DROP:
- ret = mlx5_flow_action_drop(actions, flow, remain,
- error);
+ ret = mlx5_flow_action_drop(flow, remain);
break;
case RTE_FLOW_ACTION_TYPE_QUEUE:
- ret = mlx5_flow_action_queue(dev, actions, flow, error);
+ ret = mlx5_flow_action_queue(actions, flow);
break;
case RTE_FLOW_ACTION_TYPE_RSS:
- ret = mlx5_flow_action_rss(dev, actions, flow, error);
+ ret = mlx5_flow_action_rss(actions, flow);
break;
case RTE_FLOW_ACTION_TYPE_COUNT:
ret = mlx5_flow_action_count(dev, actions, flow, remain,
@@ -2585,7 +2048,7 @@ mlx5_flow_merge(struct rte_eth_dev *dev, struct rte_flow *flow,
size_t original_verbs_size = 0;
uint32_t original_layers = 0;
int expanded_pattern_idx = 0;
- int ret;
+ int ret = 0;
uint32_t i;
if (attributes->transfer)
@@ -2594,7 +2057,7 @@ mlx5_flow_merge(struct rte_eth_dev *dev, struct rte_flow *flow,
actions, error);
if (size > flow_size)
flow = &local_flow;
- ret = mlx5_flow_attributes(dev, attributes, flow, error);
+ ret = mlx5_flow_attributes(dev->data->dev_private, attributes, flow);
if (ret < 0)
return ret;
ret = mlx5_flow_actions(dev, actions, &local_flow, 0, error);
@@ -2666,8 +2129,7 @@ mlx5_flow_merge(struct rte_eth_dev *dev, struct rte_flow *flow,
}
}
ret = mlx5_flow_items
- (dev,
- (const struct rte_flow_item *)
+ ((const struct rte_flow_item *)
&buf->entry[i].pattern[expanded_pattern_idx],
flow,
(size < flow_size) ? flow_size - size : 0, error);
@@ -2851,99 +2313,1193 @@ mlx5_flow_rxq_flags_clear(struct rte_eth_dev *dev)
}
}
-/**
- * Validate a flow supported by the NIC.
+/*
+ * Validate the flag action.
*
- * @see rte_flow_validate()
- * @see rte_flow_ops
+ * @param[in] action_flags
+ * Bit-fields that holds the actions detected until now.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_ernno is set.
*/
-int
-mlx5_flow_validate(struct rte_eth_dev *dev,
- const struct rte_flow_attr *attr,
- const struct rte_flow_item items[],
- const struct rte_flow_action actions[],
- struct rte_flow_error *error)
+static int
+mlx5_flow_validate_action_flag(uint64_t action_flags,
+ struct rte_flow_error *error)
{
- int ret = mlx5_flow_merge(dev, NULL, 0, attr, items, actions, error);
- if (ret < 0)
- return ret;
+ if (action_flags & MLX5_ACTION_DROP)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't drop and flag in same flow");
+ if (action_flags & MLX5_ACTION_MARK)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't mark and flag in same flow");
+ if (action_flags & MLX5_ACTION_FLAG)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't have 2 flag"
+ " actions in same flow");
return 0;
}
-/**
- * Remove the flow.
+/*
+ * Validate the mark action.
*
- * @param[in] dev
- * Pointer to Ethernet device.
- * @param[in, out] flow
- * Pointer to flow structure.
+ * @param[in] action
+ * Pointer to the queue action.
+ * @param[in] action_flags
+ * Bit-fields that holds the actions detected until now.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
-static void
-mlx5_flow_remove(struct rte_eth_dev *dev, struct rte_flow *flow)
+static int
+mlx5_flow_validate_action_mark(const struct rte_flow_action *action,
+ uint64_t action_flags,
+ struct rte_flow_error *error)
{
- struct priv *priv = dev->data->dev_private;
- struct mlx5_flow_verbs *verbs;
+ const struct rte_flow_action_mark *mark = action->conf;
- if (flow->nl_flow && priv->mnl_socket)
- mlx5_nl_flow_destroy(priv->mnl_socket, flow->nl_flow, NULL);
- LIST_FOREACH(verbs, &flow->verbs, next) {
- if (verbs->flow) {
- claim_zero(mlx5_glue->destroy_flow(verbs->flow));
- verbs->flow = NULL;
- }
- if (verbs->hrxq) {
- if (flow->fate & MLX5_FLOW_FATE_DROP)
- mlx5_hrxq_drop_release(dev);
- else
- mlx5_hrxq_release(dev, verbs->hrxq);
- verbs->hrxq = NULL;
- }
- }
- if (flow->counter) {
- mlx5_flow_counter_release(flow->counter);
- flow->counter = NULL;
- }
+ if (!mark)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ action,
+ "configuration cannot be null");
+ if (mark->id >= MLX5_FLOW_MARK_MAX)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &mark->id,
+ "mark id must in 0 <= id < "
+ RTE_STR(MLX5_FLOW_MARK_MAX));
+ if (action_flags & MLX5_ACTION_DROP)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't drop and mark in same flow");
+ if (action_flags & MLX5_ACTION_FLAG)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't flag and mark in same flow");
+ if (action_flags & MLX5_ACTION_MARK)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't have 2 flag actions in same"
+ " flow");
+ return 0;
}
-/**
- * Apply the flow.
+/*
+ * Validate the drop action.
+ *
+ * @param[in] action_flags
+ * Bit-fields that holds the actions detected until now.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_ernno is set.
+ */
+static int
+mlx5_flow_validate_action_drop(uint64_t action_flags,
+ struct rte_flow_error *error)
+{
+ if (action_flags & MLX5_ACTION_FLAG)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't drop and flag in same flow");
+ if (action_flags & MLX5_ACTION_MARK)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't drop and mark in same flow");
+ if (action_flags &
+ (MLX5_ACTION_DROP | MLX5_ACTION_QUEUE | MLX5_ACTION_RSS))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't have 2 fate actions in"
+ " same flow");
+ return 0;
+}
+
+/*
*
+ * Validate the queue action.
+ *
+ * @param[in] action
+ * Pointer to the queue action.
+ * @param[in] action_flags
+ * Bit-fields that holds the actions detected until now.
* @param[in] dev
- * Pointer to Ethernet device structure.
- * @param[in, out] flow
- * Pointer to flow structure.
+ * Pointer to the Ethernet device structure.
* @param[out] error
* Pointer to error structure.
*
* @return
- * 0 on success, a negative errno value otherwise and rte_errno is set.
+ * 0 on success, a negative errno value otherwise and rte_ernno is set.
*/
static int
-mlx5_flow_apply(struct rte_eth_dev *dev, struct rte_flow *flow,
- struct rte_flow_error *error)
+mlx5_flow_validate_action_queue(const struct rte_flow_action *action,
+ uint64_t action_flags,
+ struct rte_eth_dev *dev,
+ struct rte_flow_error *error)
{
struct priv *priv = dev->data->dev_private;
- struct mlx5_flow_verbs *verbs;
- int err;
-
- LIST_FOREACH(verbs, &flow->verbs, next) {
- if (flow->fate & MLX5_FLOW_FATE_DROP) {
- verbs->hrxq = mlx5_hrxq_drop_new(dev);
- if (!verbs->hrxq) {
- rte_flow_error_set
- (error, errno,
- RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
- NULL,
- "cannot get drop hash queue");
- goto error;
- }
- } else {
- struct mlx5_hrxq *hrxq;
+ const struct rte_flow_action_queue *queue = action->conf;
- hrxq = mlx5_hrxq_get(dev, flow->key,
- MLX5_RSS_HASH_KEY_LEN,
- verbs->hash_fields,
+ if (action_flags &
+ (MLX5_ACTION_DROP | MLX5_ACTION_QUEUE | MLX5_ACTION_RSS))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't have 2 fate actions in"
+ " same flow");
+ if (queue->index >= priv->rxqs_n)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &queue->index,
+ "queue index out of range");
+ if (!(*priv->rxqs)[queue->index])
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &queue->index,
+ "queue is not configured");
+ return 0;
+}
+
+/*
+ *
+ * Validate the rss action.
+ *
+ * @param[in] action
+ * Pointer to the queue action.
+ * @param[in] action_flags
+ * Bit-fields that holds the actions detected until now.
+ * @param[in] dev
+ * Pointer to the Ethernet device structure.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_ernno is set.
+ */
+static int
+mlx5_flow_validate_action_rss(const struct rte_flow_action *action,
+ uint64_t action_flags,
+ struct rte_eth_dev *dev,
+ struct rte_flow_error *error)
+{
+ struct priv *priv = dev->data->dev_private;
+ const struct rte_flow_action_rss *rss = action->conf;
+ unsigned int i;
+
+ if (action_flags &
+ (MLX5_ACTION_DROP | MLX5_ACTION_QUEUE | MLX5_ACTION_RSS))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't have 2 fate actions"
+ " in same flow");
+ if (rss->func != RTE_ETH_HASH_FUNCTION_DEFAULT &&
+ rss->func != RTE_ETH_HASH_FUNCTION_TOEPLITZ)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->func,
+ "RSS hash function not supported");
+#ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
+ if (rss->level > 2)
+#else
+ if (rss->level > 1)
+#endif
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->level,
+ "tunnel RSS is not supported");
+ if (rss->key_len < MLX5_RSS_HASH_KEY_LEN)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->key_len,
+ "RSS hash key too small");
+ if (rss->key_len > MLX5_RSS_HASH_KEY_LEN)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->key_len,
+ "RSS hash key too large");
+ if (rss->queue_num > priv->config.ind_table_max_size)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->queue_num,
+ "number of queues too large");
+ if (rss->types & MLX5_RSS_HF_MASK)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->types,
+ "some RSS protocols are not"
+ " supported");
+ for (i = 0; i != rss->queue_num; ++i) {
+ if (!(*priv->rxqs)[rss->queue[i]])
+ return rte_flow_error_set
+ (error, EINVAL, RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &rss->queue[i], "queue is not configured");
+ }
+ return 0;
+}
+
+/*
+ * Validate the count action.
+ *
+ * @param[in] dev
+ * Pointer to the Ethernet device structure.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_ernno is set.
+ */
+static int
+mlx5_flow_validate_action_count(struct rte_eth_dev *dev,
+ struct rte_flow_error *error)
+{
+ struct priv *priv = dev->data->dev_private;
+
+ if (!priv->config.flow_counter_en)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "flow counters are not supported.");
+ return 0;
+}
+
+/**
+ * Verify the @p attributes will be correctly understood by the NIC and store
+ * them in the @p flow if everything is correct.
+ *
+ * @param[in] dev
+ * Pointer to the Ethernet device structure.
+ * @param[in] attributes
+ * Pointer to flow attributes
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_flow_validate_attributes(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attributes,
+ struct rte_flow_error *error)
+{
+ struct priv *priv = dev->data->dev_private;
+ uint32_t priority_max = priv->config.flow_prio - 1;
+
+ if (attributes->group)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_GROUP,
+ NULL, "groups is not supported");
+ if (attributes->priority != MLX5_FLOW_PRIO_RSVD &&
+ attributes->priority >= priority_max)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY,
+ NULL, "priority out of range");
+ if (attributes->egress)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
+ "egress is not supported");
+ if (attributes->transfer)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_TRANSFER,
+ NULL, "transfer is not supported");
+ if (!attributes->ingress)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
+ NULL,
+ "ingress attribute is mandatory");
+ return 0;
+}
+
+/**
+ * Validate Ethernet item.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in] item_flags
+ * Bit-fields that holds the items detected until now.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_flow_validate_item_eth(const struct rte_flow_item *item,
+ uint64_t item_flags,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_eth *mask = item->mask;
+ const struct rte_flow_item_eth nic_mask = {
+ .dst.addr_bytes = "\xff\xff\xff\xff\xff\xff",
+ .src.addr_bytes = "\xff\xff\xff\xff\xff\xff",
+ .type = RTE_BE16(0xffff),
+ };
+ int ret;
+ int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
+
+ if (item_flags & MLX5_FLOW_LAYER_OUTER_L2)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "3 levels of l2 are not supported");
+ if ((item_flags & MLX5_FLOW_LAYER_INNER_L2) && !tunnel)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "2 L2 without tunnel are not supported");
+ if (!mask)
+ mask = &rte_flow_item_eth_mask;
+ ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
+ (const uint8_t *)&nic_mask,
+ sizeof(struct rte_flow_item_eth),
+ error);
+ return ret;
+}
+
+/**
+ * Validate VLAN item.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in] item_flags
+ * Bit-fields that holds the items detected until now.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_flow_validate_item_vlan(const struct rte_flow_item *item,
+ int64_t item_flags,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_vlan *spec = item->spec;
+ const struct rte_flow_item_vlan *mask = item->mask;
+ const struct rte_flow_item_vlan nic_mask = {
+ .tci = RTE_BE16(0x0fff),
+ .inner_type = RTE_BE16(0xffff),
+ };
+ const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
+ int ret;
+ const uint32_t l34m = tunnel ? (MLX5_FLOW_LAYER_INNER_L3 |
+ MLX5_FLOW_LAYER_INNER_L4) :
+ (MLX5_FLOW_LAYER_OUTER_L3 |
+ MLX5_FLOW_LAYER_OUTER_L4);
+ const uint32_t vlanm = tunnel ? MLX5_FLOW_LAYER_INNER_VLAN :
+ MLX5_FLOW_LAYER_OUTER_VLAN;
+
+ if (item_flags & vlanm)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "VLAN layer already configured");
+ else if ((item_flags & l34m) != 0)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "L2 layer cannot follow L3/L4 layer");
+ if (!mask)
+ mask = &rte_flow_item_vlan_mask;
+ ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
+ (const uint8_t *)&nic_mask,
+ sizeof(struct rte_flow_item_vlan),
+ error);
+ if (ret)
+ return ret;
+ /*
+ * From verbs perspective an empty VLAN is equivalent
+ * to a packet without VLAN layer.
+ */
+ if (!spec->tci)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM_SPEC,
+ item->spec,
+ "VLAN cannot be empty");
+ return 0;
+}
+
+/**
+ * Validate IPV4 item.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in] item_flags
+ * Bit-fields that holds the items detected until now.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_flow_validate_item_ipv4(const struct rte_flow_item *item,
+ int64_t item_flags,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_ipv4 *mask = item->mask;
+ const struct rte_flow_item_ipv4 nic_mask = {
+ .hdr = {
+ .src_addr = RTE_BE32(0xffffffff),
+ .dst_addr = RTE_BE32(0xffffffff),
+ .type_of_service = 0xff,
+ .next_proto_id = 0xff,
+ },
+ };
+ const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
+ int ret;
+
+ if (item_flags & (tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
+ MLX5_FLOW_LAYER_OUTER_L3))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "multiple L3 layers not supported");
+ else if (item_flags & (tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
+ MLX5_FLOW_LAYER_OUTER_L4))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "L3 cannot follow an L4 layer.");
+ if (!mask)
+ mask = &rte_flow_item_ipv4_mask;
+ ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
+ (const uint8_t *)&nic_mask,
+ sizeof(struct rte_flow_item_ipv4),
+ error);
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+
+/**
+ * Validate IPV6 item.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in] item_flags
+ * Bit-fields that holds the items detected until now.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_flow_validate_item_ipv6(const struct rte_flow_item *item,
+ uint64_t item_flags,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_ipv6 *mask = item->mask;
+ const struct rte_flow_item_ipv6 nic_mask = {
+ .hdr = {
+ .src_addr =
+ "\xff\xff\xff\xff\xff\xff\xff\xff"
+ "\xff\xff\xff\xff\xff\xff\xff\xff",
+ .dst_addr =
+ "\xff\xff\xff\xff\xff\xff\xff\xff"
+ "\xff\xff\xff\xff\xff\xff\xff\xff",
+ .vtc_flow = RTE_BE32(0xffffffff),
+ .proto = 0xff,
+ .hop_limits = 0xff,
+ },
+ };
+ const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
+ int ret;
+
+ if (item_flags & (tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
+ MLX5_FLOW_LAYER_OUTER_L3))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "multiple L3 layers not supported");
+ else if (item_flags & (tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
+ MLX5_FLOW_LAYER_OUTER_L4))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "L3 cannot follow an L4 layer.");
+ /*
+ * IPv6 is not recognised by the NIC inside a GRE tunnel.
+ * Such support has to be disabled as the rule will be
+ * accepted. Issue reproduced with Mellanox OFED 4.3-3.0.2.1 and
+ * Mellanox OFED 4.4-1.0.0.0.
+ */
+ if (tunnel && item_flags & MLX5_FLOW_LAYER_GRE)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "IPv6 inside a GRE tunnel is"
+ " not recognised.");
+ if (!mask)
+ mask = &rte_flow_item_ipv6_mask;
+ ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
+ (const uint8_t *)&nic_mask,
+ sizeof(struct rte_flow_item_ipv6),
+ error);
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+
+/**
+ * Validate UDP item.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in] item_flags
+ * Bit-fields that holds the items detected until now.
+ * @param[in] target_protocol
+ * The next protocol in the previous item.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_flow_validate_item_udp(const struct rte_flow_item *item,
+ uint64_t item_flags,
+ uint8_t target_protocol,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_udp *mask = item->mask;
+ const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
+ int ret;
+
+ if (target_protocol != 0xff && target_protocol != MLX5_IP_PROTOCOL_UDP)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "protocol filtering not compatible"
+ " with UDP layer");
+ if (!(item_flags & (tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
+ MLX5_FLOW_LAYER_OUTER_L3)))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "L3 is mandatory to filter on L4");
+ if (item_flags & (tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
+ MLX5_FLOW_LAYER_OUTER_L4))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "L4 layer is already present");
+ if (!mask)
+ mask = &rte_flow_item_udp_mask;
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&rte_flow_item_udp_mask,
+ sizeof(struct rte_flow_item_udp), error);
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+
+/**
+ * Validate TCP item.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in] item_flags
+ * Bit-fields that holds the items detected until now.
+ * @param[in] target_protocol
+ * The next protocol in the previous item.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_flow_validate_item_tcp(const struct rte_flow_item *item,
+ uint64_t item_flags,
+ uint8_t target_protocol,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_tcp *mask = item->mask;
+ const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
+ int ret;
+
+ if (target_protocol != 0xff && target_protocol != MLX5_IP_PROTOCOL_TCP)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "protocol filtering not compatible"
+ " with TCP layer");
+ if (!(item_flags & (tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
+ MLX5_FLOW_LAYER_OUTER_L3)))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "L3 is mandatory to filter on L4");
+ if (item_flags & (tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
+ MLX5_FLOW_LAYER_OUTER_L4))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "L4 layer is already present");
+ if (!mask)
+ mask = &rte_flow_item_tcp_mask;
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&rte_flow_item_tcp_mask,
+ sizeof(struct rte_flow_item_tcp), error);
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+
+/**
+ * Validate VXLAN item.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in] item_flags
+ * Bit-fields that holds the items detected until now.
+ * @param[in] target_protocol
+ * The next protocol in the previous item.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_flow_validate_item_vxlan(const struct rte_flow_item *item,
+ uint64_t item_flags,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_vxlan *spec = item->spec;
+ const struct rte_flow_item_vxlan *mask = item->mask;
+ int ret;
+
+ if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "a tunnel is already present");
+ /*
+ * Verify only UDPv4 is present as defined in
+ * https://tools.ietf.org/html/rfc7348
+ */
+ if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L4_UDP))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "no outer UDP layer found");
+ if (!mask)
+ mask = &rte_flow_item_vxlan_mask;
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&rte_flow_item_vxlan_mask,
+ sizeof(struct rte_flow_item_vxlan),
+ error);
+ if (ret < 0)
+ return ret;
+ /*
+ * Tunnel id 0 is equivalent as not adding a VXLAN layer, if
+ * only this layer is defined in the Verbs specification it is
+ * interpreted as wildcard and all packets will match this
+ * rule, if it follows a full stack layer (ex: eth / ipv4 /
+ * udp), all packets matching the layers before will also
+ * match this rule. To avoid such situation, VNI 0 is
+ * currently refused.
+ */
+ if (!spec->vni)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "VXLAN vni cannot be 0");
+ if (!(item_flags & MLX5_FLOW_LAYER_OUTER))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "VXLAN tunnel must be fully defined");
+ return 0;
+}
+
+/**
+ * Validate VXLAN_GPE item.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in] item_flags
+ * Bit-fields that holds the items detected until now.
+ * @param[in] priv
+ * Pointer to the private data structure.
+ * @param[in] target_protocol
+ * The next protocol in the previous item.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_flow_validate_item_vxlan_gpe(const struct rte_flow_item *item,
+ uint64_t item_flags,
+ struct rte_eth_dev *dev,
+ struct rte_flow_error *error)
+{
+ struct priv *priv = dev->data->dev_private;
+ const struct rte_flow_item_vxlan_gpe *spec = item->spec;
+ const struct rte_flow_item_vxlan_gpe *mask = item->mask;
+ int ret;
+ union vni {
+ uint32_t vlan_id;
+ uint8_t vni[4];
+ } id = { .vlan_id = 0, };
+
+ if (!priv->config.l3_vxlan_en)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "L3 VXLAN is not enabled by device"
+ " parameter and/or not configured in"
+ " firmware");
+ if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "a tunnel is already present");
+ /*
+ * Verify only UDPv4 is present as defined in
+ * https://tools.ietf.org/html/rfc7348
+ */
+ if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L4_UDP))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "no outer UDP layer found");
+ if (!mask)
+ mask = &rte_flow_item_vxlan_gpe_mask;
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&rte_flow_item_vxlan_gpe_mask,
+ sizeof(struct rte_flow_item_vxlan_gpe),
+ error);
+ if (ret < 0)
+ return ret;
+ if (spec) {
+ memcpy(&id.vni[1], spec->vni, 3);
+ if (spec->protocol)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "VxLAN-GPE protocol"
+ " not supported");
+ }
+ /*
+ * Tunnel id 0 is equivalent as not adding a VXLAN layer, if only this
+ * layer is defined in the Verbs specification it is interpreted as
+ * wildcard and all packets will match this rule, if it follows a full
+ * stack layer (ex: eth / ipv4 / udp), all packets matching the layers
+ * before will also match this rule. To avoid such situation, VNI 0
+ * is currently refused.
+ */
+ if (!id.vlan_id)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "VXLAN-GPE vni cannot be 0");
+ if (!(item_flags & MLX5_FLOW_LAYER_OUTER))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "VXLAN-GPE tunnel must be fully"
+ " defined");
+ return 0;
+}
+
+/**
+ * Validate GRE item.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in] item_flags
+ * Bit flags to mark detected items.
+ * @param[in] target_protocol
+ * The next protocol in the previous item.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_flow_validate_item_gre(const struct rte_flow_item *item,
+ uint64_t item_flags,
+ uint8_t target_protocol,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_gre *spec __rte_unused = item->spec;
+ const struct rte_flow_item_gre *mask = item->mask;
+ int ret;
+
+ if (target_protocol != 0xff && target_protocol != MLX5_IP_PROTOCOL_GRE)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "protocol filtering not compatible"
+ " with this GRE layer");
+ if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "a tunnel is already present");
+ if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L3))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "L3 Layer is missing");
+ if (!mask)
+ mask = &rte_flow_item_gre_mask;
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&rte_flow_item_gre_mask,
+ sizeof(struct rte_flow_item_gre), error);
+ if (ret < 0)
+ return ret;
+#ifndef HAVE_IBV_DEVICE_MPLS_SUPPORT
+ if (spec && (spec->protocol & mask->protocol))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "without MPLS support the"
+ " specification cannot be used for"
+ " filtering");
+#endif
+ return 0;
+}
+
+/**
+ * Validate MPLS item.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in] item_flags
+ * Bit-fields that holds the items detected until now.
+ * @param[in] target_protocol
+ * The next protocol in the previous item.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_flow_validate_item_mpls(const struct rte_flow_item *item __rte_unused,
+ uint64_t item_flags __rte_unused,
+ uint8_t target_protocol __rte_unused,
+ struct rte_flow_error *error)
+{
+#ifdef HAVE_IBV_DEVICE_MPLS_SUPPORT
+ const struct rte_flow_item_mpls *mask = item->mask;
+ int ret;
+
+ if (target_protocol != 0xff && target_protocol != MLX5_IP_PROTOCOL_MPLS)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "protocol filtering not compatible"
+ " with MPLS layer");
+ if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "a tunnel is already"
+ " present");
+ if (!mask)
+ mask = &rte_flow_item_mpls_mask;
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&rte_flow_item_mpls_mask,
+ sizeof(struct rte_flow_item_mpls), error);
+ if (ret < 0)
+ return ret;
+ return 0;
+#endif /* !HAVE_IBV_DEVICE_MPLS_SUPPORT */
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "MPLS is not supported by Verbs, please"
+ " update.");
+}
+
+/**
+ *
+ * Internal validation function.
+ *
+ * @param[in] dev
+ * Pointer to the Ethernet device structure.
+ * @param[in] attr
+ * Pointer to the flow attributes.
+ * @param[in] items
+ * Pointer to the list of items.
+ * @param[in] actions
+ * Pointer to the list of actions.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_ernno is set.
+ */
+static int mlx5_flow_verbs_validate(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item items[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error)
+{
+ int ret;
+ uint32_t action_flags = 0;
+ uint32_t item_flags = 0;
+ int tunnel = 0;
+ uint8_t next_protocol = 0xff;
+
+ if (items == NULL)
+ return -1;
+ ret = mlx5_flow_validate_attributes(dev, attr, error);
+ if (ret < 0)
+ return ret;
+ for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
+ int ret = 0;
+ switch (items->type) {
+ case RTE_FLOW_ITEM_TYPE_VOID:
+ break;
+ case RTE_FLOW_ITEM_TYPE_ETH:
+ ret = mlx5_flow_validate_item_eth(items, item_flags,
+ error);
+ if (ret < 0)
+ return ret;
+ item_flags |= tunnel ? MLX5_FLOW_LAYER_INNER_L2 :
+ MLX5_FLOW_LAYER_OUTER_L2;
+ break;
+ case RTE_FLOW_ITEM_TYPE_VLAN:
+ ret = mlx5_flow_validate_item_vlan(items, item_flags,
+ error);
+ if (ret < 0)
+ return ret;
+ item_flags |= tunnel ? MLX5_FLOW_LAYER_INNER_VLAN :
+ MLX5_FLOW_LAYER_OUTER_VLAN;
+ break;
+ case RTE_FLOW_ITEM_TYPE_IPV4:
+ ret = mlx5_flow_validate_item_ipv4(items, item_flags,
+ error);
+ if (ret < 0)
+ return ret;
+ item_flags |= tunnel ? MLX5_FLOW_LAYER_INNER_L3_IPV4 :
+ MLX5_FLOW_LAYER_OUTER_L3_IPV4;
+ if (items->mask != NULL &&
+ ((const struct rte_flow_item_ipv4 *)
+ items->mask)->hdr.next_proto_id)
+ next_protocol =
+ ((const struct rte_flow_item_ipv4 *)
+ (items->spec))->hdr.next_proto_id;
+ break;
+ case RTE_FLOW_ITEM_TYPE_IPV6:
+ ret = mlx5_flow_validate_item_ipv6(items, item_flags,
+ error);
+ if (ret < 0)
+ return ret;
+ item_flags |= tunnel ? MLX5_FLOW_LAYER_INNER_L3_IPV6 :
+ MLX5_FLOW_LAYER_OUTER_L3_IPV6;
+ if (items->mask != NULL &&
+ ((const struct rte_flow_item_ipv6 *)
+ items->mask)->hdr.proto)
+ next_protocol =
+ ((const struct rte_flow_item_ipv6 *)
+ items->spec)->hdr.proto;
+ break;
+ case RTE_FLOW_ITEM_TYPE_UDP:
+ ret = mlx5_flow_validate_item_udp(items, item_flags,
+ next_protocol,
+ error);
+ if (ret < 0)
+ return ret;
+ item_flags |= tunnel ? MLX5_FLOW_LAYER_INNER_L4_UDP :
+ MLX5_FLOW_LAYER_OUTER_L4_UDP;
+ break;
+ case RTE_FLOW_ITEM_TYPE_TCP:
+ ret = mlx5_flow_validate_item_tcp(items, item_flags,
+ next_protocol, error);
+ if (ret < 0)
+ return ret;
+ item_flags |= tunnel ? MLX5_FLOW_LAYER_INNER_L4_TCP :
+ MLX5_FLOW_LAYER_OUTER_L4_TCP;
+ break;
+ case RTE_FLOW_ITEM_TYPE_VXLAN:
+ ret = mlx5_flow_validate_item_vxlan(items, item_flags,
+ error);
+ if (ret < 0)
+ return ret;
+ item_flags |= MLX5_FLOW_LAYER_VXLAN;
+ break;
+ case RTE_FLOW_ITEM_TYPE_VXLAN_GPE:
+ ret = mlx5_flow_validate_item_vxlan_gpe(items,
+ item_flags,
+ dev, error);
+ if (ret < 0)
+ return ret;
+ item_flags |= MLX5_FLOW_LAYER_VXLAN_GPE;
+ break;
+ case RTE_FLOW_ITEM_TYPE_GRE:
+ ret = mlx5_flow_validate_item_gre(items, item_flags,
+ next_protocol, error);
+ if (ret < 0)
+ return ret;
+ item_flags |= MLX5_FLOW_LAYER_GRE;
+ break;
+ case RTE_FLOW_ITEM_TYPE_MPLS:
+ ret = mlx5_flow_validate_item_mpls(items, item_flags,
+ next_protocol,
+ error);
+ if (ret < 0)
+ return ret;
+ if (next_protocol != 0xff &&
+ next_protocol != MLX5_IP_PROTOCOL_MPLS)
+ return rte_flow_error_set
+ (error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM, items,
+ "protocol filtering not compatible"
+ " with MPLS layer");
+ item_flags |= MLX5_FLOW_LAYER_MPLS;
+ break;
+ default:
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ NULL,
+ "item not supported");
+ }
+ }
+ for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
+ tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
+ switch (actions->type) {
+ case RTE_FLOW_ACTION_TYPE_VOID:
+ break;
+ case RTE_FLOW_ACTION_TYPE_FLAG:
+ ret = mlx5_flow_validate_action_flag(action_flags,
+ error);
+ if (ret < 0)
+ return ret;
+ action_flags |= MLX5_ACTION_FLAG;
+ break;
+ case RTE_FLOW_ACTION_TYPE_MARK:
+ ret = mlx5_flow_validate_action_mark(actions,
+ action_flags,
+ error);
+ if (ret < 0)
+ return ret;
+ action_flags |= MLX5_ACTION_MARK;
+ break;
+ case RTE_FLOW_ACTION_TYPE_DROP:
+ ret = mlx5_flow_validate_action_drop(action_flags,
+ error);
+ if (ret < 0)
+ return ret;
+ action_flags |= MLX5_ACTION_DROP;
+ break;
+ case RTE_FLOW_ACTION_TYPE_QUEUE:
+ ret = mlx5_flow_validate_action_queue(actions,
+ action_flags, dev,
+ error);
+ if (ret < 0)
+ return ret;
+ action_flags |= MLX5_ACTION_QUEUE;
+ break;
+ case RTE_FLOW_ACTION_TYPE_RSS:
+ ret = mlx5_flow_validate_action_rss(actions,
+ action_flags, dev,
+ error);
+ if (ret < 0)
+ return ret;
+ action_flags |= MLX5_ACTION_RSS;
+ break;
+ case RTE_FLOW_ACTION_TYPE_COUNT:
+ ret = mlx5_flow_validate_action_count(dev, error);
+ if (ret < 0)
+ return ret;
+ action_flags |= MLX5_ACTION_COUNT;
+ break;
+ default:
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ actions,
+ "action not supported");
+ }
+ }
+ return 0;
+}
+
+/**
+ * Validate a flow supported by the NIC.
+ *
+ * @see rte_flow_validate()
+ * @see rte_flow_ops
+ */
+int
+mlx5_flow_validate(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item items[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error)
+{
+ int ret;
+
+ ret = mlx5_flow_verbs_validate(dev, attr, items, actions, error);
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+
+/**
+ * Remove the flow.
+ *
+ * @param[in] dev
+ * Pointer to the Ethernet device structure.
+ * @param[in, out] flow
+ * Pointer to flow structure.
+ */
+static void
+mlx5_flow_remove(struct rte_eth_dev *dev, struct rte_flow *flow)
+{
+ struct priv *priv = dev->data->dev_private;
+ struct mlx5_flow_verbs *verbs;
+
+ if (flow->nl_flow && priv->mnl_socket)
+ mlx5_nl_flow_destroy(priv->mnl_socket, flow->nl_flow, NULL);
+ LIST_FOREACH(verbs, &flow->verbs, next) {
+ if (verbs->flow) {
+ claim_zero(mlx5_glue->destroy_flow(verbs->flow));
+ verbs->flow = NULL;
+ }
+ if (verbs->hrxq) {
+ if (flow->fate & MLX5_FLOW_FATE_DROP)
+ mlx5_hrxq_drop_release(dev);
+ else
+ mlx5_hrxq_release(dev, verbs->hrxq);
+ verbs->hrxq = NULL;
+ }
+ }
+ if (flow->counter) {
+ mlx5_flow_counter_release(flow->counter);
+ flow->counter = NULL;
+ }
+}
+
+/**
+ * Apply the flow.
+ *
+ * @param[in] dev
+ * Pointer to the Ethernet device structure.
+ * @param[in, out] flow
+ * Pointer to flow structure.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_flow_apply(struct rte_eth_dev *dev, struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ struct priv *priv = dev->data->dev_private;
+ struct mlx5_flow_verbs *verbs;
+ int err;
+
+ LIST_FOREACH(verbs, &flow->verbs, next) {
+ if (flow->fate & MLX5_FLOW_FATE_DROP) {
+ verbs->hrxq = mlx5_hrxq_drop_new(dev);
+ if (!verbs->hrxq) {
+ rte_flow_error_set
+ (error, errno,
+ RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+ NULL,
+ "cannot get drop hash queue");
+ goto error;
+ }
+ } else {
+ struct mlx5_hrxq *hrxq;
+
+ hrxq = mlx5_hrxq_get(dev, flow->key,
+ MLX5_RSS_HASH_KEY_LEN,
+ verbs->hash_fields,
(*flow->queue),
flow->rss.queue_num);
if (!hrxq)
@@ -3025,6 +3581,9 @@ mlx5_flow_list_create(struct rte_eth_dev *dev,
size_t size = 0;
int ret;
+ ret = mlx5_flow_validate(dev, attr, items, actions, error);
+ if (ret < 0)
+ return NULL;
ret = mlx5_flow_merge(dev, flow, size, attr, items, actions, error);
if (ret < 0)
return NULL;
@@ -3233,7 +3792,7 @@ mlx5_ctrl_flow_vlan(struct rte_eth_dev *dev,
},
{
.type = (vlan_spec) ? RTE_FLOW_ITEM_TYPE_VLAN :
- RTE_FLOW_ITEM_TYPE_END,
+ RTE_FLOW_ITEM_TYPE_END,
.spec = vlan_spec,
.last = NULL,
.mask = vlan_mask,
--
2.11.0
next prev parent reply other threads:[~2018-09-24 19:50 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-19 6:48 [dpdk-dev] [PATCH 00/11] net/mlx5: add Direct Verbs flow driver support Yongseok Koh
2018-09-19 6:48 ` [dpdk-dev] [PATCH 01/11] net/mlx5: split flow validation to dedicated function Yongseok Koh
2018-09-19 6:48 ` [dpdk-dev] [PATCH 02/11] net/mlx5: add flow prepare function Yongseok Koh
2018-09-19 6:48 ` [dpdk-dev] [PATCH 03/11] net/mlx5: add flow translate function Yongseok Koh
2018-09-19 6:48 ` [dpdk-dev] [PATCH 04/11] net/mlx5: add support for multiple flow drivers Yongseok Koh
2018-09-19 6:48 ` [dpdk-dev] [PATCH 05/11] net/mlx5: add Direct Verbs validation function Yongseok Koh
2018-09-19 6:48 ` [dpdk-dev] [PATCH 06/11] net/mlx5: add Direct Verbs prepare function Yongseok Koh
2018-09-19 6:48 ` [dpdk-dev] [PATCH 07/11] net/mlx5: add Direct Verbs translate items Yongseok Koh
2018-09-19 6:48 ` [dpdk-dev] [PATCH 08/11] net/mlx5: add Direct Verbs translate actions Yongseok Koh
2018-09-19 6:48 ` [dpdk-dev] [PATCH 09/11] net/mlx5: add Direct Verbs driver to glue Yongseok Koh
2018-09-19 6:48 ` [dpdk-dev] [PATCH 10/11] net/mlx5: add Direct Verbs final functions Yongseok Koh
2018-09-19 6:48 ` [dpdk-dev] [PATCH 11/11] net/mlx5: add runtime parameter to enable Direct Verbs Yongseok Koh
2018-09-24 19:50 ` [dpdk-dev] [PATCH v2 00/11] net/mlx5: add Direct Verbs flow driver support Yongseok Koh
2018-09-24 19:50 ` Yongseok Koh [this message]
2018-09-24 19:50 ` [dpdk-dev] [PATCH v2 02/11] net/mlx5: add flow prepare function Yongseok Koh
2018-09-24 19:50 ` [dpdk-dev] [PATCH v2 03/11] net/mlx5: add flow translate function Yongseok Koh
2018-09-24 19:50 ` [dpdk-dev] [PATCH v2 04/11] net/mlx5: add support for multiple flow drivers Yongseok Koh
2018-09-24 19:50 ` [dpdk-dev] [PATCH v2 05/11] net/mlx5: add Direct Verbs validation function Yongseok Koh
2018-09-24 19:50 ` [dpdk-dev] [PATCH v2 06/11] net/mlx5: add Direct Verbs prepare function Yongseok Koh
2018-09-24 19:50 ` [dpdk-dev] [PATCH v2 07/11] net/mlx5: add Direct Verbs translate items Yongseok Koh
2018-09-24 19:50 ` [dpdk-dev] [PATCH v2 08/11] net/mlx5: add Direct Verbs translate actions Yongseok Koh
2018-09-24 19:50 ` [dpdk-dev] [PATCH v2 09/11] net/mlx5: add Direct Verbs driver to glue Yongseok Koh
2018-09-24 19:50 ` [dpdk-dev] [PATCH v2 10/11] net/mlx5: add Direct Verbs final functions Yongseok Koh
2018-09-24 19:50 ` [dpdk-dev] [PATCH v2 11/11] net/mlx5: add runtime parameter to enable Direct Verbs Yongseok Koh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180924194951.18650-2-yskoh@mellanox.com \
--to=yskoh@mellanox.com \
--cc=dev@dpdk.org \
--cc=orika@mellanox.com \
--cc=shahafs@mellanox.com \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).