From: Jerin Jacob <jerin.jacob@caviumnetworks.com>
To: Wenzhuo Lu <wenzhuo.lu@intel.com>,
Jingjing Wu <jingjing.wu@intel.com>,
Bernard Iremonger <bernard.iremonger@intel.com>,
John McNamara <john.mcnamara@intel.com>,
Marko Kovacevic <marko.kovacevic@intel.com>
Cc: dev@dpdk.org, shahafs@mellanox.com,
Jerin Jacob <jerin.jacob@caviumnetworks.com>
Subject: [dpdk-dev] [PATCH v2 3/4] app/testpmd: add outer UDP HW checksum support
Date: Wed, 3 Oct 2018 00:54:50 +0530 [thread overview]
Message-ID: <20181002192451.19119-3-jerin.jacob@caviumnetworks.com> (raw)
In-Reply-To: <20181002192451.19119-1-jerin.jacob@caviumnetworks.com>
Added outer-udp Tx HW checksum support for csum forward engine
if device supports DEV_TX_OFFLOAD_OUTER_UDP_CKSUM.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
---
v2:
- Added outer-udp support for csum engine
---
app/test-pmd/cmdline.c | 24 ++++++++++++++++++---
app/test-pmd/csumonly.c | 13 +++++++++--
doc/guides/testpmd_app_ug/testpmd_funcs.rst | 8 +++++--
3 files changed, 38 insertions(+), 7 deletions(-)
diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index 0c5399dc4..2fd007423 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -397,12 +397,13 @@ static void cmd_help_long_parsed(void *parsed_result,
" Disable hardware insertion of a VLAN header in"
" packets sent on a port.\n\n"
- "csum set (ip|udp|tcp|sctp|outer-ip) (hw|sw) (port_id)\n"
+ "csum set (ip|udp|tcp|sctp|outer-ip|outer-udp) (hw|sw) (port_id)\n"
" Select hardware or software calculation of the"
" checksum when transmitting a packet using the"
" csum forward engine.\n"
" ip|udp|tcp|sctp always concern the inner layer.\n"
" outer-ip concerns the outer IP layer in"
+ " outer-udp concerns the outer UDP layer in"
" case the packet is recognized as a tunnel packet by"
" the forward engine (vxlan, gre and ipip are supported)\n"
" Please check the NIC datasheet for HW limits.\n\n"
@@ -4177,6 +4178,8 @@ csum_show(int port_id)
(tx_offloads & DEV_TX_OFFLOAD_SCTP_CKSUM) ? "hw" : "sw");
printf("Outer-Ip checksum offload is %s\n",
(tx_offloads & DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM) ? "hw" : "sw");
+ printf("Outer-Udp checksum offload is %s\n",
+ (tx_offloads & DEV_TX_OFFLOAD_OUTER_UDP_CKSUM) ? "hw" : "sw");
/* display warnings if configuration is not supported by the NIC */
rte_eth_dev_info_get(port_id, &dev_info);
@@ -4205,6 +4208,12 @@ csum_show(int port_id)
printf("Warning: hardware outer IP checksum enabled but not "
"supported by port %d\n", port_id);
}
+ if ((tx_offloads & DEV_TX_OFFLOAD_OUTER_UDP_CKSUM) &&
+ (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_OUTER_UDP_CKSUM)
+ == 0) {
+ printf("Warning: hardware outer UDP checksum enabled but not "
+ "supported by port %d\n", port_id);
+ }
}
static void
@@ -4273,6 +4282,15 @@ cmd_csum_parsed(void *parsed_result,
printf("Outer IP checksum offload is not "
"supported by port %u\n", res->port_id);
}
+ } else if (!strcmp(res->proto, "outer-udp")) {
+ if (hw == 0 || (dev_info.tx_offload_capa &
+ DEV_TX_OFFLOAD_OUTER_UDP_CKSUM)) {
+ csum_offloads |=
+ DEV_TX_OFFLOAD_OUTER_UDP_CKSUM;
+ } else {
+ printf("Outer UDP checksum offload is not "
+ "supported by port %u\n", res->port_id);
+ }
}
if (hw) {
@@ -4296,7 +4314,7 @@ cmdline_parse_token_string_t cmd_csum_mode =
mode, "set");
cmdline_parse_token_string_t cmd_csum_proto =
TOKEN_STRING_INITIALIZER(struct cmd_csum_result,
- proto, "ip#tcp#udp#sctp#outer-ip");
+ proto, "ip#tcp#udp#sctp#outer-ip#outer-udp");
cmdline_parse_token_string_t cmd_csum_hwsw =
TOKEN_STRING_INITIALIZER(struct cmd_csum_result,
hwsw, "hw#sw");
@@ -4307,7 +4325,7 @@ cmdline_parse_token_num_t cmd_csum_portid =
cmdline_parse_inst_t cmd_csum_set = {
.f = cmd_csum_parsed,
.data = NULL,
- .help_str = "csum set ip|tcp|udp|sctp|outer-ip hw|sw <port_id>: "
+ .help_str = "csum set ip|tcp|udp|sctp|outer-ip|outer-udp hw|sw <port_id>: "
"Enable/Disable hardware calculation of L3/L4 checksum when "
"using csum forward engine",
.tokens = {
diff --git a/app/test-pmd/csumonly.c b/app/test-pmd/csumonly.c
index 494829266..ea5b112d6 100644
--- a/app/test-pmd/csumonly.c
+++ b/app/test-pmd/csumonly.c
@@ -468,10 +468,15 @@ process_outer_cksums(void *outer_l3_hdr, struct testpmd_offload_info *info,
if (info->outer_l4_proto != IPPROTO_UDP)
return ol_flags;
+ /* Skip SW outer UDP checksum generation if HW supports it */
+ if (tx_offloads & DEV_TX_OFFLOAD_OUTER_UDP_CKSUM) {
+ ol_flags |= PKT_TX_OUTER_UDP_CKSUM;
+ return ol_flags;
+ }
+
udp_hdr = (struct udp_hdr *)((char *)outer_l3_hdr + info->outer_l3_len);
- /* outer UDP checksum is done in software as we have no hardware
- * supporting it today, and no API for it. In the other side, for
+ /* outer UDP checksum is done in software. In the other side, for
* UDP tunneling, like VXLAN or Geneve, outer UDP checksum can be
* set to zero.
*
@@ -826,6 +831,8 @@ pkt_burst_checksum_forward(struct fwd_stream *fs)
if (info.tunnel_tso_segsz ||
(tx_offloads &
DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM) ||
+ (tx_offloads &
+ DEV_TX_OFFLOAD_OUTER_UDP_CKSUM) ||
(tx_ol_flags & PKT_TX_OUTER_IPV6)) {
m->outer_l2_len = info.outer_l2_len;
m->outer_l3_len = info.outer_l3_len;
@@ -898,6 +905,8 @@ pkt_burst_checksum_forward(struct fwd_stream *fs)
if (info.is_tunnel == 1) {
if ((tx_offloads &
DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM) ||
+ (tx_offloads &
+ DEV_TX_OFFLOAD_OUTER_UDP_CKSUM) ||
(tx_ol_flags & PKT_TX_OUTER_IPV6))
printf("tx: m->outer_l2_len=%d "
"m->outer_l3_len=%d\n",
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 3a73000a6..cfcabf6f0 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -857,7 +857,7 @@ csum set
Select hardware or software calculation of the checksum when
transmitting a packet using the ``csum`` forwarding engine::
- testpmd> csum set (ip|udp|tcp|sctp|outer-ip) (hw|sw) (port_id)
+ testpmd> csum set (ip|udp|tcp|sctp|outer-ip|outer-udp) (hw|sw) (port_id)
Where:
@@ -867,6 +867,10 @@ Where:
as a tunnel packet by the forwarding engine (vxlan, gre and ipip are
supported). See also the ``csum parse-tunnel`` command.
+* ``outer-udp`` relates to the outer UDP layer in the case where the packet is recognized
+ as a tunnel packet by the forwarding engine (vxlan, vxlan-gpe are
+ supported). See also the ``csum parse-tunnel`` command.
+
.. note::
Check the NIC Datasheet for hardware limits.
@@ -940,7 +944,7 @@ Consider a packet in packet like the following::
* If parse-tunnel is enabled, the ``ip|udp|tcp|sctp`` parameters of ``csum set``
command relate to the inner headers (here ``ipv4_in`` and ``tcp_in``), and the
- ``outer-ip parameter`` relates to the outer headers (here ``ipv4_out``).
+ ``outer-ip|outer-udp`` parameter relates to the outer headers (here ``ipv4_out`` and ``udp_out``).
* If parse-tunnel is disabled, the ``ip|udp|tcp|sctp`` parameters of ``csum set``
command relate to the outer headers, here ``ipv4_out`` and ``udp_out``.
--
2.19.0
next prev parent reply other threads:[~2018-10-02 19:26 UTC|newest]
Thread overview: 87+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-13 13:47 [dpdk-dev] [PATCH 1/4] ethdev: add SCTP Rx checksum offload support Jerin Jacob
2018-09-13 13:47 ` [dpdk-dev] [PATCH 2/4] mbuf: fix Tx offload mask Jerin Jacob
2018-10-01 13:45 ` Ferruh Yigit
2018-10-01 15:53 ` Jerin Jacob
2018-10-01 16:13 ` Ferruh Yigit
2018-09-13 13:47 ` [dpdk-dev] [PATCH 3/4] ethdev: add Rx offload outer L4 checksum definitions Jerin Jacob
2018-09-13 17:24 ` Shahaf Shuler
2018-09-14 3:05 ` Jerin Jacob
2018-09-16 5:53 ` Shahaf Shuler
2018-09-16 9:32 ` Jerin Jacob
2018-09-13 13:47 ` [dpdk-dev] [PATCH 4/4] ethdev: add Tx " Jerin Jacob
2018-10-01 13:45 ` Ferruh Yigit
2018-10-02 9:52 ` Jerin Jacob
2018-10-01 13:45 ` [dpdk-dev] [PATCH 1/4] ethdev: add SCTP Rx checksum offload support Ferruh Yigit
2018-10-01 13:46 ` Ferruh Yigit
2018-10-01 15:59 ` Jerin Jacob
2018-10-01 16:11 ` Ferruh Yigit
2018-10-02 8:53 ` Jerin Jacob
2018-10-02 9:13 ` Ferruh Yigit
2018-10-02 10:51 ` [dpdk-dev] [PATCH v2 1/2] " Jerin Jacob
2018-10-02 10:51 ` [dpdk-dev] [PATCH v2 2/2] mbuf: fix Tx offload mask Jerin Jacob
2018-10-04 2:31 ` Hu, Jiayu
2018-10-04 16:05 ` Ferruh Yigit
2018-10-03 18:52 ` [dpdk-dev] [PATCH v2 1/2] ethdev: add SCTP Rx checksum offload support Ferruh Yigit
2018-10-02 19:24 ` [dpdk-dev] [PATCH v2 1/4] ethdev: add Rx offload outer UDP checksum definition Jerin Jacob
2018-10-02 19:24 ` [dpdk-dev] [PATCH v2 2/4] ethdev: add Tx " Jerin Jacob
2018-10-03 7:41 ` Andrew Rybchenko
2018-10-03 7:58 ` Jerin Jacob
2018-10-03 8:02 ` Ferruh Yigit
2018-10-03 8:36 ` Thomas Monjalon
2018-10-03 10:52 ` Iremonger, Bernard
2018-10-02 19:24 ` Jerin Jacob [this message]
2018-10-03 13:23 ` [dpdk-dev] [PATCH v2 3/4] app/testpmd: add outer UDP HW checksum support Iremonger, Bernard
2018-10-02 19:24 ` [dpdk-dev] [PATCH v2 4/4] app/testpmd: collect bad outer L4 checksum for csum engine Jerin Jacob
2018-10-03 8:29 ` Andrew Rybchenko
2018-10-03 7:34 ` [dpdk-dev] [PATCH v2 1/4] ethdev: add Rx offload outer UDP checksum definition Andrew Rybchenko
2018-10-03 7:57 ` Jerin Jacob
2018-10-03 8:35 ` Thomas Monjalon
2018-10-03 8:36 ` Andrew Rybchenko
2018-10-03 17:12 ` Jerin Jacob
2018-10-03 18:00 ` Andrew Rybchenko
2018-10-03 18:14 ` Jerin Jacob
2018-10-03 19:47 ` Andrew Rybchenko
2018-10-03 20:08 ` Thomas Monjalon
2018-10-04 5:59 ` Jerin Jacob
2018-10-05 19:48 ` Ferruh Yigit
2018-10-05 20:04 ` Ferruh Yigit
2018-10-05 22:44 ` Thomas Monjalon
2018-10-06 8:15 ` Jerin Jacob
2018-10-06 12:18 ` Ananyev, Konstantin
2018-10-08 8:12 ` Ferruh Yigit
2018-10-08 8:24 ` Jerin Jacob
2018-10-08 9:04 ` Thomas Monjalon
2018-10-08 9:37 ` Jerin Jacob
2018-10-08 10:53 ` Ferruh Yigit
2018-10-08 11:55 ` Jerin Jacob
2018-10-08 12:13 ` Ferruh Yigit
2018-10-08 12:25 ` Jerin Jacob
2018-10-08 13:03 ` Thomas Monjalon
2018-10-08 13:08 ` Jerin Jacob
2018-10-03 8:53 ` Ananyev, Konstantin
2018-10-03 8:59 ` Jerin Jacob
2018-10-03 9:17 ` Ananyev, Konstantin
2018-10-03 9:22 ` Jerin Jacob
2018-10-03 10:16 ` Ananyev, Konstantin
2018-10-03 11:15 ` Jerin Jacob
2018-10-03 10:51 ` Iremonger, Bernard
2018-10-03 11:19 ` Jerin Jacob
2018-10-03 13:00 ` Iremonger, Bernard
2018-10-03 18:16 ` [dpdk-dev] [PATCH v3 " Jerin Jacob
2018-10-03 18:16 ` [dpdk-dev] [PATCH v3 2/4] ethdev: add Tx " Jerin Jacob
2018-10-03 18:16 ` [dpdk-dev] [PATCH v3 3/4] app/testpmd: add outer UDP HW checksum support Jerin Jacob
2018-10-03 18:16 ` [dpdk-dev] [PATCH v3 4/4] app/testpmd: collect bad outer L4 checksum for csum engine Jerin Jacob
2018-10-04 13:45 ` Iremonger, Bernard
2018-10-04 14:16 ` Jerin Jacob
2018-10-04 15:06 ` Iremonger, Bernard
2018-10-08 16:09 ` [dpdk-dev] [PATCH v4 1/4] ethdev: add Rx offload outer UDP checksum definition Jerin Jacob
2018-10-08 16:09 ` [dpdk-dev] [PATCH v4 2/4] ethdev: add Tx " Jerin Jacob
2018-10-09 10:06 ` Andrew Rybchenko
2018-10-08 16:09 ` [dpdk-dev] [PATCH v4 3/4] app/testpmd: add outer UDP HW checksum support Jerin Jacob
2018-10-08 16:09 ` [dpdk-dev] [PATCH v4 4/4] app/testpmd: collect bad outer L4 checksum for csum engine Jerin Jacob
2018-10-09 10:06 ` [dpdk-dev] [PATCH v4 1/4] ethdev: add Rx offload outer UDP checksum definition Andrew Rybchenko
2018-10-09 14:18 ` [dpdk-dev] [PATCH v5 " Jerin Jacob
2018-10-09 14:18 ` [dpdk-dev] [PATCH v5 2/4] ethdev: add Tx " Jerin Jacob
2018-10-09 14:18 ` [dpdk-dev] [PATCH v5 3/4] app/testpmd: add outer UDP HW checksum support Jerin Jacob
2018-10-09 14:18 ` [dpdk-dev] [PATCH v5 4/4] app/testpmd: collect bad outer L4 checksum for csum engine Jerin Jacob
2018-10-09 16:46 ` [dpdk-dev] [PATCH v5 1/4] ethdev: add Rx offload outer UDP checksum definition Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181002192451.19119-3-jerin.jacob@caviumnetworks.com \
--to=jerin.jacob@caviumnetworks.com \
--cc=bernard.iremonger@intel.com \
--cc=dev@dpdk.org \
--cc=jingjing.wu@intel.com \
--cc=john.mcnamara@intel.com \
--cc=marko.kovacevic@intel.com \
--cc=shahafs@mellanox.com \
--cc=wenzhuo.lu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).