From: Gagandeep Singh <g.singh@nxp.com>
To: dev@dpdk.org, akhil.goyal@nxp.com
Cc: Hemant Agrawal <hemant.agrawal@nxp.com>
Subject: [dpdk-dev] [PATCH v2 13/14] crypto/caam_jr: add security offload
Date: Fri, 12 Oct 2018 20:10:54 +0530 [thread overview]
Message-ID: <20181012144055.9461-14-g.singh@nxp.com> (raw)
In-Reply-To: <20181012144055.9461-1-g.singh@nxp.com>
From: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch provides the support for protocol offload
to the hardware. following security operations are
added:
- session_create
- session_destroy
- capabilities_get
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
---
drivers/crypto/caam_jr/caam_jr.c | 360 ++++++++++++++++++++++++++-
drivers/crypto/caam_jr/caam_jr_pvt.h | 5 +
2 files changed, 354 insertions(+), 11 deletions(-)
diff --git a/drivers/crypto/caam_jr/caam_jr.c b/drivers/crypto/caam_jr/caam_jr.c
index beb54d5da..e3002d6fb 100644
--- a/drivers/crypto/caam_jr/caam_jr.c
+++ b/drivers/crypto/caam_jr/caam_jr.c
@@ -27,7 +27,6 @@
/* RTA header files */
#include <hw/desc/common.h>
#include <hw/desc/algo.h>
-#include <hw/desc/ipsec.h>
#include <of.h>
#define CAAM_JR_DBG 0
@@ -186,7 +185,15 @@ is_auth_cipher(struct caam_jr_session *ses)
{
PMD_INIT_FUNC_TRACE();
return ((ses->cipher_alg != RTE_CRYPTO_CIPHER_NULL) &&
- (ses->auth_alg != RTE_CRYPTO_AUTH_NULL));
+ (ses->auth_alg != RTE_CRYPTO_AUTH_NULL) &&
+ (ses->proto_alg != RTE_SECURITY_PROTOCOL_IPSEC));
+}
+
+static inline int
+is_proto_ipsec(struct caam_jr_session *ses)
+{
+ PMD_INIT_FUNC_TRACE();
+ return (ses->proto_alg == RTE_SECURITY_PROTOCOL_IPSEC);
}
static inline int
@@ -212,27 +219,39 @@ caam_auth_alg(struct caam_jr_session *ses, struct alginfo *alginfo_a)
ses->digest_length = 0;
break;
case RTE_CRYPTO_AUTH_MD5_HMAC:
- alginfo_a->algtype = OP_ALG_ALGSEL_MD5;
+ alginfo_a->algtype =
+ (ses->proto_alg == RTE_SECURITY_PROTOCOL_IPSEC) ?
+ OP_PCL_IPSEC_HMAC_MD5_96 : OP_ALG_ALGSEL_MD5;
alginfo_a->algmode = OP_ALG_AAI_HMAC;
break;
case RTE_CRYPTO_AUTH_SHA1_HMAC:
- alginfo_a->algtype = OP_ALG_ALGSEL_SHA1;
+ alginfo_a->algtype =
+ (ses->proto_alg == RTE_SECURITY_PROTOCOL_IPSEC) ?
+ OP_PCL_IPSEC_HMAC_SHA1_96 : OP_ALG_ALGSEL_SHA1;
alginfo_a->algmode = OP_ALG_AAI_HMAC;
break;
case RTE_CRYPTO_AUTH_SHA224_HMAC:
- alginfo_a->algtype = OP_ALG_ALGSEL_SHA224;
+ alginfo_a->algtype =
+ (ses->proto_alg == RTE_SECURITY_PROTOCOL_IPSEC) ?
+ OP_PCL_IPSEC_HMAC_SHA1_160 : OP_ALG_ALGSEL_SHA224;
alginfo_a->algmode = OP_ALG_AAI_HMAC;
break;
case RTE_CRYPTO_AUTH_SHA256_HMAC:
- alginfo_a->algtype = OP_ALG_ALGSEL_SHA256;
+ alginfo_a->algtype =
+ (ses->proto_alg == RTE_SECURITY_PROTOCOL_IPSEC) ?
+ OP_PCL_IPSEC_HMAC_SHA2_256_128 : OP_ALG_ALGSEL_SHA256;
alginfo_a->algmode = OP_ALG_AAI_HMAC;
break;
case RTE_CRYPTO_AUTH_SHA384_HMAC:
- alginfo_a->algtype = OP_ALG_ALGSEL_SHA384;
+ alginfo_a->algtype =
+ (ses->proto_alg == RTE_SECURITY_PROTOCOL_IPSEC) ?
+ OP_PCL_IPSEC_HMAC_SHA2_384_192 : OP_ALG_ALGSEL_SHA384;
alginfo_a->algmode = OP_ALG_AAI_HMAC;
break;
case RTE_CRYPTO_AUTH_SHA512_HMAC:
- alginfo_a->algtype = OP_ALG_ALGSEL_SHA512;
+ alginfo_a->algtype =
+ (ses->proto_alg == RTE_SECURITY_PROTOCOL_IPSEC) ?
+ OP_PCL_IPSEC_HMAC_SHA2_512_256 : OP_ALG_ALGSEL_SHA512;
alginfo_a->algmode = OP_ALG_AAI_HMAC;
break;
default:
@@ -248,15 +267,21 @@ caam_cipher_alg(struct caam_jr_session *ses, struct alginfo *alginfo_c)
case RTE_CRYPTO_CIPHER_NULL:
break;
case RTE_CRYPTO_CIPHER_AES_CBC:
- alginfo_c->algtype = OP_ALG_ALGSEL_AES;
+ alginfo_c->algtype =
+ (ses->proto_alg == RTE_SECURITY_PROTOCOL_IPSEC) ?
+ OP_PCL_IPSEC_AES_CBC : OP_ALG_ALGSEL_AES;
alginfo_c->algmode = OP_ALG_AAI_CBC;
break;
case RTE_CRYPTO_CIPHER_3DES_CBC:
- alginfo_c->algtype = OP_ALG_ALGSEL_3DES;
+ alginfo_c->algtype =
+ (ses->proto_alg == RTE_SECURITY_PROTOCOL_IPSEC) ?
+ OP_PCL_IPSEC_3DES : OP_ALG_ALGSEL_3DES;
alginfo_c->algmode = OP_ALG_AAI_CBC;
break;
case RTE_CRYPTO_CIPHER_AES_CTR:
- alginfo_c->algtype = OP_ALG_ALGSEL_AES;
+ alginfo_c->algtype =
+ (ses->proto_alg == RTE_SECURITY_PROTOCOL_IPSEC) ?
+ OP_PCL_IPSEC_AES_CTR : OP_ALG_ALGSEL_AES;
alginfo_c->algmode = OP_ALG_AAI_CTR;
break;
default:
@@ -420,6 +445,22 @@ caam_jr_prep_cdb(struct caam_jr_session *ses)
cdb->sh_desc[0] = 0;
cdb->sh_desc[1] = 0;
cdb->sh_desc[2] = 0;
+ if (is_proto_ipsec(ses)) {
+ if (ses->dir == DIR_ENC) {
+ shared_desc_len = cnstr_shdsc_ipsec_new_encap(
+ cdb->sh_desc,
+ true, swap, SHR_SERIAL,
+ &ses->encap_pdb,
+ (uint8_t *)&ses->ip4_hdr,
+ &alginfo_c, &alginfo_a);
+ } else if (ses->dir == DIR_DEC) {
+ shared_desc_len = cnstr_shdsc_ipsec_new_decap(
+ cdb->sh_desc,
+ true, swap, SHR_SERIAL,
+ &ses->decap_pdb,
+ &alginfo_c, &alginfo_a);
+ }
+ } else {
/* Auth_only_len is set as 0 here and it will be
* overwritten in fd for each packet.
*/
@@ -427,6 +468,7 @@ caam_jr_prep_cdb(struct caam_jr_session *ses)
true, swap, &alginfo_c, &alginfo_a,
ses->iv.length, 0,
ses->digest_length, ses->dir);
+ }
}
if (shared_desc_len < 0) {
@@ -1281,6 +1323,50 @@ build_cipher_auth(struct rte_crypto_op *op, struct caam_jr_session *ses)
return ctx;
}
+
+static inline struct caam_jr_op_ctx *
+build_proto(struct rte_crypto_op *op, struct caam_jr_session *ses)
+{
+ struct rte_crypto_sym_op *sym = op->sym;
+ struct caam_jr_op_ctx *ctx = NULL;
+ phys_addr_t src_start_addr, dst_start_addr;
+ struct sec_cdb *cdb;
+ uint64_t sdesc_offset;
+ struct sec_job_descriptor_t *jobdescr;
+
+ PMD_INIT_FUNC_TRACE();
+ ctx = caam_jr_alloc_ctx(ses);
+ if (!ctx)
+ return NULL;
+ ctx->op = op;
+
+ src_start_addr = rte_pktmbuf_iova(sym->m_src);
+ if (sym->m_dst)
+ dst_start_addr = rte_pktmbuf_iova(sym->m_dst);
+ else
+ dst_start_addr = src_start_addr;
+
+ cdb = ses->cdb;
+ sdesc_offset = (size_t) ((char *)&cdb->sh_desc - (char *)cdb);
+
+ jobdescr = (struct sec_job_descriptor_t *) ctx->jobdes.desc;
+
+ SEC_JD_INIT(jobdescr);
+ SEC_JD_SET_SD(jobdescr,
+ (phys_addr_t)(caam_jr_dma_vtop(cdb)) + sdesc_offset,
+ cdb->sh_hdr.hi.field.idlen);
+
+ /* output */
+ SEC_JD_SET_OUT_PTR(jobdescr, (uint64_t)dst_start_addr, 0,
+ sym->m_src->buf_len - sym->m_src->data_off);
+ /* input */
+ SEC_JD_SET_IN_PTR(jobdescr, (uint64_t)src_start_addr, 0,
+ sym->m_src->pkt_len);
+ sym->m_src->packet_type &= ~RTE_PTYPE_L4_MASK;
+
+ return ctx;
+}
+
static int
caam_jr_enqueue_op(struct rte_crypto_op *op, struct caam_jr_qp *qp)
{
@@ -1296,6 +1382,11 @@ caam_jr_enqueue_op(struct rte_crypto_op *op, struct caam_jr_qp *qp)
get_sym_session_private_data(op->sym->session,
cryptodev_driver_id);
break;
+ case RTE_CRYPTO_OP_SECURITY_SESSION:
+ ses = (struct caam_jr_session *)
+ get_sec_session_private_data(
+ op->sym->sec_session);
+ break;
default:
CAAM_JR_DP_ERR("sessionless crypto op not supported");
qp->tx_errs++;
@@ -1317,6 +1408,8 @@ caam_jr_enqueue_op(struct rte_crypto_op *op, struct caam_jr_qp *qp)
ctx = build_auth_only(op, ses);
else if (is_cipher_only(ses))
ctx = build_cipher_only(op, ses);
+ else if (is_proto_ipsec(ses))
+ ctx = build_proto(op, ses);
} else {
if (is_auth_cipher(ses))
ctx = build_cipher_auth_sg(op, ses);
@@ -1687,6 +1780,228 @@ caam_jr_sym_session_clear(struct rte_cryptodev *dev,
}
}
+static int
+caam_jr_set_ipsec_session(__rte_unused struct rte_cryptodev *dev,
+ struct rte_security_session_conf *conf,
+ void *sess)
+{
+ struct sec_job_ring_t *internals = dev->data->dev_private;
+ struct rte_security_ipsec_xform *ipsec_xform = &conf->ipsec;
+ struct rte_crypto_auth_xform *auth_xform;
+ struct rte_crypto_cipher_xform *cipher_xform;
+ struct caam_jr_session *session = (struct caam_jr_session *)sess;
+
+ PMD_INIT_FUNC_TRACE();
+
+ if (ipsec_xform->direction == RTE_SECURITY_IPSEC_SA_DIR_EGRESS) {
+ cipher_xform = &conf->crypto_xform->cipher;
+ auth_xform = &conf->crypto_xform->next->auth;
+ } else {
+ auth_xform = &conf->crypto_xform->auth;
+ cipher_xform = &conf->crypto_xform->next->cipher;
+ }
+ session->proto_alg = conf->protocol;
+ session->cipher_key.data = rte_zmalloc(NULL,
+ cipher_xform->key.length,
+ RTE_CACHE_LINE_SIZE);
+ if (session->cipher_key.data == NULL &&
+ cipher_xform->key.length > 0) {
+ CAAM_JR_ERR("No Memory for cipher key\n");
+ return -ENOMEM;
+ }
+
+ session->cipher_key.length = cipher_xform->key.length;
+ session->auth_key.data = rte_zmalloc(NULL,
+ auth_xform->key.length,
+ RTE_CACHE_LINE_SIZE);
+ if (session->auth_key.data == NULL &&
+ auth_xform->key.length > 0) {
+ CAAM_JR_ERR("No Memory for auth key\n");
+ rte_free(session->cipher_key.data);
+ return -ENOMEM;
+ }
+ session->auth_key.length = auth_xform->key.length;
+ memcpy(session->cipher_key.data, cipher_xform->key.data,
+ cipher_xform->key.length);
+ memcpy(session->auth_key.data, auth_xform->key.data,
+ auth_xform->key.length);
+
+ switch (auth_xform->algo) {
+ case RTE_CRYPTO_AUTH_SHA1_HMAC:
+ session->auth_alg = RTE_CRYPTO_AUTH_SHA1_HMAC;
+ break;
+ case RTE_CRYPTO_AUTH_MD5_HMAC:
+ session->auth_alg = RTE_CRYPTO_AUTH_MD5_HMAC;
+ break;
+ case RTE_CRYPTO_AUTH_SHA256_HMAC:
+ session->auth_alg = RTE_CRYPTO_AUTH_SHA256_HMAC;
+ break;
+ case RTE_CRYPTO_AUTH_SHA384_HMAC:
+ session->auth_alg = RTE_CRYPTO_AUTH_SHA384_HMAC;
+ break;
+ case RTE_CRYPTO_AUTH_SHA512_HMAC:
+ session->auth_alg = RTE_CRYPTO_AUTH_SHA512_HMAC;
+ break;
+ case RTE_CRYPTO_AUTH_AES_CMAC:
+ session->auth_alg = RTE_CRYPTO_AUTH_AES_CMAC;
+ break;
+ case RTE_CRYPTO_AUTH_NULL:
+ session->auth_alg = RTE_CRYPTO_AUTH_NULL;
+ break;
+ case RTE_CRYPTO_AUTH_SHA224_HMAC:
+ case RTE_CRYPTO_AUTH_AES_XCBC_MAC:
+ case RTE_CRYPTO_AUTH_SNOW3G_UIA2:
+ case RTE_CRYPTO_AUTH_SHA1:
+ case RTE_CRYPTO_AUTH_SHA256:
+ case RTE_CRYPTO_AUTH_SHA512:
+ case RTE_CRYPTO_AUTH_SHA224:
+ case RTE_CRYPTO_AUTH_SHA384:
+ case RTE_CRYPTO_AUTH_MD5:
+ case RTE_CRYPTO_AUTH_AES_GMAC:
+ case RTE_CRYPTO_AUTH_KASUMI_F9:
+ case RTE_CRYPTO_AUTH_AES_CBC_MAC:
+ case RTE_CRYPTO_AUTH_ZUC_EIA3:
+ CAAM_JR_ERR("Crypto: Unsupported auth alg %u\n",
+ auth_xform->algo);
+ goto out;
+ default:
+ CAAM_JR_ERR("Crypto: Undefined Auth specified %u\n",
+ auth_xform->algo);
+ goto out;
+ }
+
+ switch (cipher_xform->algo) {
+ case RTE_CRYPTO_CIPHER_AES_CBC:
+ session->cipher_alg = RTE_CRYPTO_CIPHER_AES_CBC;
+ break;
+ case RTE_CRYPTO_CIPHER_3DES_CBC:
+ session->cipher_alg = RTE_CRYPTO_CIPHER_3DES_CBC;
+ break;
+ case RTE_CRYPTO_CIPHER_AES_CTR:
+ session->cipher_alg = RTE_CRYPTO_CIPHER_AES_CTR;
+ break;
+ case RTE_CRYPTO_CIPHER_NULL:
+ case RTE_CRYPTO_CIPHER_SNOW3G_UEA2:
+ case RTE_CRYPTO_CIPHER_3DES_ECB:
+ case RTE_CRYPTO_CIPHER_AES_ECB:
+ case RTE_CRYPTO_CIPHER_KASUMI_F8:
+ CAAM_JR_ERR("Crypto: Unsupported Cipher alg %u\n",
+ cipher_xform->algo);
+ goto out;
+ default:
+ CAAM_JR_ERR("Crypto: Undefined Cipher specified %u\n",
+ cipher_xform->algo);
+ goto out;
+ }
+
+ if (ipsec_xform->direction == RTE_SECURITY_IPSEC_SA_DIR_EGRESS) {
+ memset(&session->encap_pdb, 0, sizeof(struct ipsec_encap_pdb) +
+ sizeof(session->ip4_hdr));
+ session->ip4_hdr.ip_v = IPVERSION;
+ session->ip4_hdr.ip_hl = 5;
+ session->ip4_hdr.ip_len = rte_cpu_to_be_16(
+ sizeof(session->ip4_hdr));
+ session->ip4_hdr.ip_tos = ipsec_xform->tunnel.ipv4.dscp;
+ session->ip4_hdr.ip_id = 0;
+ session->ip4_hdr.ip_off = 0;
+ session->ip4_hdr.ip_ttl = ipsec_xform->tunnel.ipv4.ttl;
+ session->ip4_hdr.ip_p = (ipsec_xform->proto ==
+ RTE_SECURITY_IPSEC_SA_PROTO_ESP) ? IPPROTO_ESP
+ : IPPROTO_AH;
+ session->ip4_hdr.ip_sum = 0;
+ session->ip4_hdr.ip_src = ipsec_xform->tunnel.ipv4.src_ip;
+ session->ip4_hdr.ip_dst = ipsec_xform->tunnel.ipv4.dst_ip;
+ session->ip4_hdr.ip_sum = calc_chksum((uint16_t *)
+ (void *)&session->ip4_hdr,
+ sizeof(struct ip));
+
+ session->encap_pdb.options =
+ (IPVERSION << PDBNH_ESP_ENCAP_SHIFT) |
+ PDBOPTS_ESP_OIHI_PDB_INL |
+ PDBOPTS_ESP_IVSRC |
+ PDBHMO_ESP_ENCAP_DTTL;
+ session->encap_pdb.spi = ipsec_xform->spi;
+ session->encap_pdb.ip_hdr_len = sizeof(struct ip);
+
+ session->dir = DIR_ENC;
+ } else if (ipsec_xform->direction ==
+ RTE_SECURITY_IPSEC_SA_DIR_INGRESS) {
+ memset(&session->decap_pdb, 0, sizeof(struct ipsec_decap_pdb));
+ session->decap_pdb.options = sizeof(struct ip) << 16;
+ session->dir = DIR_DEC;
+ } else
+ goto out;
+ session->ctx_pool = internals->ctx_pool;
+
+ return 0;
+out:
+ rte_free(session->auth_key.data);
+ rte_free(session->cipher_key.data);
+ memset(session, 0, sizeof(struct caam_jr_session));
+ return -1;
+}
+
+static int
+caam_jr_security_session_create(void *dev,
+ struct rte_security_session_conf *conf,
+ struct rte_security_session *sess,
+ struct rte_mempool *mempool)
+{
+ void *sess_private_data;
+ struct rte_cryptodev *cdev = (struct rte_cryptodev *)dev;
+ int ret;
+
+ PMD_INIT_FUNC_TRACE();
+ if (rte_mempool_get(mempool, &sess_private_data)) {
+ CAAM_JR_ERR("Couldn't get object from session mempool");
+ return -ENOMEM;
+ }
+
+ switch (conf->protocol) {
+ case RTE_SECURITY_PROTOCOL_IPSEC:
+ ret = caam_jr_set_ipsec_session(cdev, conf,
+ sess_private_data);
+ break;
+ case RTE_SECURITY_PROTOCOL_MACSEC:
+ return -ENOTSUP;
+ default:
+ return -EINVAL;
+ }
+ if (ret != 0) {
+ CAAM_JR_ERR("failed to configure session parameters");
+ /* Return session to mempool */
+ rte_mempool_put(mempool, sess_private_data);
+ return ret;
+ }
+
+ set_sec_session_private_data(sess, sess_private_data);
+
+ return ret;
+}
+
+/* Clear the memory of session so it doesn't leave key material behind */
+static int
+caam_jr_security_session_destroy(void *dev __rte_unused,
+ struct rte_security_session *sess)
+{
+ PMD_INIT_FUNC_TRACE();
+ void *sess_priv = get_sec_session_private_data(sess);
+
+ struct caam_jr_session *s = (struct caam_jr_session *)sess_priv;
+
+ if (sess_priv) {
+ struct rte_mempool *sess_mp = rte_mempool_from_obj(sess_priv);
+
+ rte_free(s->cipher_key.data);
+ rte_free(s->auth_key.data);
+ memset(sess, 0, sizeof(struct caam_jr_session));
+ set_sec_session_private_data(sess, NULL);
+ rte_mempool_put(sess_mp, sess_priv);
+ }
+ return 0;
+}
+
+
static int
caam_jr_dev_configure(struct rte_cryptodev *dev,
struct rte_cryptodev_config *config __rte_unused)
@@ -1778,6 +2093,14 @@ static struct rte_cryptodev_ops caam_jr_ops = {
.sym_session_clear = caam_jr_sym_session_clear
};
+static struct rte_security_ops caam_jr_security_ops = {
+ .session_create = caam_jr_security_session_create,
+ .session_update = NULL,
+ .session_stats_get = NULL,
+ .session_destroy = caam_jr_security_session_destroy,
+ .set_pkt_metadata = NULL,
+ .capabilities_get = caam_jr_get_security_capabilities
+};
/* @brief Flush job rings of any processed descs.
* The processed descs are silently dropped,
@@ -1997,6 +2320,7 @@ caam_jr_dev_init(const char *name,
struct rte_cryptodev_pmd_init_params *init_params)
{
struct rte_cryptodev *dev;
+ struct rte_security_ctx *security_instance;
struct uio_job_ring *job_ring;
char str[RTE_CRYPTODEV_NAME_MAX_LEN];
@@ -2066,6 +2390,20 @@ caam_jr_dev_init(const char *name,
return 0;
}
+ /*TODO free it during teardown*/
+ security_instance = rte_malloc("caam_jr",
+ sizeof(struct rte_security_ctx), 0);
+ if (security_instance == NULL) {
+ CAAM_JR_ERR("memory allocation failed\n");
+ //todo error handling.
+ goto cleanup2;
+ }
+
+ security_instance->device = (void *)dev;
+ security_instance->ops = &caam_jr_security_ops;
+ security_instance->sess_cnt = 0;
+ dev->security_ctx = security_instance;
+
RTE_LOG(INFO, PMD, "%s cryptodev init\n", dev->data->name);
return 0;
diff --git a/drivers/crypto/caam_jr/caam_jr_pvt.h b/drivers/crypto/caam_jr/caam_jr_pvt.h
index 58fd257fc..9f1adabc7 100644
--- a/drivers/crypto/caam_jr/caam_jr_pvt.h
+++ b/drivers/crypto/caam_jr/caam_jr_pvt.h
@@ -5,6 +5,8 @@
#ifndef CAAM_JR_PVT_H
#define CAAM_JR_PVT_H
+#include <hw/desc/ipsec.h>
+
/* NXP CAAM JR PMD device name */
#define CAAM_JR_ALG_UNSUPPORT (-1)
@@ -110,6 +112,7 @@ struct caam_jr_session {
enum rte_crypto_cipher_algorithm cipher_alg; /* Cipher Algorithm*/
enum rte_crypto_auth_algorithm auth_alg; /* Authentication Algorithm*/
enum rte_crypto_aead_algorithm aead_alg; /* AEAD Algorithm*/
+ enum rte_security_session_protocol proto_alg; /* Security Algorithm*/
union {
struct {
uint8_t *data; /* pointer to key data */
@@ -132,7 +135,9 @@ struct caam_jr_session {
} iv; /* Initialisation vector parameters */
uint16_t auth_only_len; /* Length of data for Auth only */
uint32_t digest_length;
+ struct ipsec_encap_pdb encap_pdb;
struct ip ip4_hdr;
+ struct ipsec_decap_pdb decap_pdb;
struct caam_jr_qp *qp;
struct sec_cdb *cdb; /* cmd block associated with qp */
struct rte_mempool *ctx_pool; /* session mempool for caam_jr_op_ctx */
--
2.17.1
next prev parent reply other threads:[~2018-10-12 14:41 UTC|newest]
Thread overview: 97+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-13 6:08 [dpdk-dev] [PATCH 00/10] Introducing the NXP CAAM job ring driver Gagandeep Singh
2018-09-13 6:08 ` [dpdk-dev] [PATCH 01/10] doc: add caam jr cryptodev details Gagandeep Singh
2018-09-18 12:27 ` Akhil Goyal
2018-10-12 13:29 ` Gagandeep Singh
2018-09-13 6:08 ` [dpdk-dev] [PATCH 02/10] crypto/caam_jr: introduce basic driver Gagandeep Singh
2018-09-18 12:13 ` Akhil Goyal
2018-10-12 13:15 ` Gagandeep Singh
2018-09-13 6:08 ` [dpdk-dev] [PATCH 03/10] crypto/caam_jr: add HW config for job rings Gagandeep Singh
2018-09-18 13:37 ` Akhil Goyal
2018-10-12 13:32 ` Gagandeep Singh
2018-09-13 6:08 ` [dpdk-dev] [PATCH 04/10] crypto/caam_jr: add device configuration routines Gagandeep Singh
2018-09-18 13:59 ` Akhil Goyal
2018-10-12 13:38 ` Gagandeep Singh
2018-09-13 6:08 ` [dpdk-dev] [PATCH 05/10] crypto/caam_jr: add queue config functions Gagandeep Singh
2018-09-18 14:04 ` Akhil Goyal
2018-10-12 13:39 ` Gagandeep Singh
2018-09-13 6:08 ` [dpdk-dev] [PATCH 06/10] crypto/caam_jr: add basic session config routines Gagandeep Singh
2018-09-13 6:08 ` [dpdk-dev] [PATCH 07/10] crypto/caam_jr: add enqueue and dequeue routines Gagandeep Singh
2018-09-13 6:08 ` [dpdk-dev] [PATCH 08/10] crypto/caam_jr: add auth cipher and aead session support Gagandeep Singh
2018-09-13 6:08 ` [dpdk-dev] [PATCH 09/10] crypto/caam_jr: add stats support Gagandeep Singh
2018-09-13 6:08 ` [dpdk-dev] [PATCH 10/10] crypto/caam_jr: add security offload support Gagandeep Singh
2018-09-18 14:21 ` [dpdk-dev] [PATCH 00/10] Introducing the NXP CAAM job ring driver Akhil Goyal
2018-10-12 14:40 ` [dpdk-dev] [PATCH v2 00/14] " Gagandeep Singh
2018-10-12 14:40 ` [dpdk-dev] [PATCH v2 01/14] crypto/caam_jr: introduce basic driver Gagandeep Singh
2018-10-12 14:40 ` [dpdk-dev] [PATCH v2 02/14] crypto/caam_jr: add HW tuning options Gagandeep Singh
2018-10-19 9:11 ` Thomas Monjalon
2018-10-22 12:31 ` Gagandeep Singh
2018-10-22 13:32 ` Ali Alnubani
2018-10-12 14:40 ` [dpdk-dev] [PATCH v2 03/14] crypto/caam_jr: add routines to configure HW Gagandeep Singh
2018-10-12 14:40 ` [dpdk-dev] [PATCH v2 04/14] crypto/caam_jr: add UIO specific operations Gagandeep Singh
2018-10-12 14:40 ` [dpdk-dev] [PATCH v2 05/14] crypto/caam_jr: add basic job ring routines Gagandeep Singh
2018-10-12 14:40 ` [dpdk-dev] [PATCH v2 06/14] crypto/caam_jr: add device basic ops Gagandeep Singh
2018-10-12 14:40 ` [dpdk-dev] [PATCH v2 07/14] crypto/caam_jr: add queue pair config ops Gagandeep Singh
2018-10-12 14:40 ` [dpdk-dev] [PATCH v2 08/14] crypto/caam_jr: add device cababilities Gagandeep Singh
2018-10-12 14:40 ` [dpdk-dev] [PATCH v2 09/14] crypto/caam_jr: add session configuration methods Gagandeep Singh
2018-10-12 14:40 ` [dpdk-dev] [PATCH v2 10/14] crypto/caam_jr: add enqueue dequeue operations Gagandeep Singh
2018-10-12 14:40 ` [dpdk-dev] [PATCH v2 11/14] crypto/caam_jr: add scatter gather Gagandeep Singh
2018-10-12 14:40 ` [dpdk-dev] [PATCH v2 12/14] crypto/caam_jr: add statistics ops Gagandeep Singh
2018-10-12 14:40 ` Gagandeep Singh [this message]
2018-10-19 2:17 ` [dpdk-dev] [PATCH v2 13/14] crypto/caam_jr: add security offload Thomas Monjalon
2018-10-22 9:26 ` Thomas Monjalon
2018-10-22 10:31 ` Hemant Agrawal
2018-10-12 14:40 ` [dpdk-dev] [PATCH v2 14/14] doc: add caam jr cryptodev details Gagandeep Singh
2018-10-16 12:58 ` [dpdk-dev] [PATCH v2 00/14] Introducing the NXP CAAM job ring driver Akhil Goyal
2018-10-16 14:34 ` Akhil Goyal
2018-10-22 13:31 ` [dpdk-dev] [PATCH v3 00/15] " Gagandeep Singh
2018-10-22 13:31 ` [dpdk-dev] [PATCH v3 01/15] crypto/caam_jr: introduce basic driver Gagandeep Singh
2018-10-22 13:31 ` [dpdk-dev] [PATCH v3 02/15] crypto/caam_jr: add HW tuning options Gagandeep Singh
2018-10-22 13:31 ` [dpdk-dev] [PATCH v3 03/15] crypto/caam_jr: add routines to configure HW Gagandeep Singh
2018-10-22 13:31 ` [dpdk-dev] [PATCH v3 04/15] crypto/caam_jr: add UIO specific operations Gagandeep Singh
2018-10-22 13:31 ` [dpdk-dev] [PATCH v3 05/15] crypto/caam_jr: add basic job ring routines Gagandeep Singh
2018-10-22 13:31 ` [dpdk-dev] [PATCH v3 06/15] crypto/caam_jr: add device basic ops Gagandeep Singh
2018-10-22 13:31 ` [dpdk-dev] [PATCH v3 07/15] crypto/caam_jr: add queue pair config ops Gagandeep Singh
2018-10-22 13:31 ` [dpdk-dev] [PATCH v3 08/15] crypto/caam_jr: add session configuration methods Gagandeep Singh
2018-10-22 13:31 ` [dpdk-dev] [PATCH v3 09/15] crypto/caam_jr: add device cababilities Gagandeep Singh
2018-10-22 13:31 ` [dpdk-dev] [PATCH v3 10/15] crypto/caam_jr: add enqueue dequeue operations Gagandeep Singh
2018-10-22 13:31 ` [dpdk-dev] [PATCH v3 11/15] crypto/caam_jr: add scatter gather Gagandeep Singh
2018-10-22 13:31 ` [dpdk-dev] [PATCH v3 12/15] crypto/caam_jr: add statistics ops Gagandeep Singh
2018-10-22 13:31 ` [dpdk-dev] [PATCH v3 13/15] crypto/caam_jr: add security offload Gagandeep Singh
2018-10-22 13:31 ` [dpdk-dev] [PATCH v3 14/15] doc: add caam jr cryptodev details Gagandeep Singh
2018-10-22 13:31 ` [dpdk-dev] [PATCH v3 15/15] test/crypto: add CAAM JR driver validation test cases Gagandeep Singh
2018-10-22 14:17 ` [dpdk-dev] [PATCH v4 00/15] Introducing the NXP CAAM job ring driver Gagandeep Singh
2018-10-22 14:17 ` [dpdk-dev] [PATCH v4 01/15] crypto/caam_jr: introduce basic driver Gagandeep Singh
2018-10-22 14:17 ` [dpdk-dev] [PATCH v4 02/15] crypto/caam_jr: add HW tuning options Gagandeep Singh
2018-10-22 14:17 ` [dpdk-dev] [PATCH v4 03/15] crypto/caam_jr: add routines to configure HW Gagandeep Singh
2018-10-22 14:17 ` [dpdk-dev] [PATCH v4 04/15] crypto/caam_jr: add UIO specific operations Gagandeep Singh
2018-10-22 14:17 ` [dpdk-dev] [PATCH v4 05/15] crypto/caam_jr: add basic job ring routines Gagandeep Singh
2018-10-22 14:17 ` [dpdk-dev] [PATCH v4 06/15] crypto/caam_jr: add device basic ops Gagandeep Singh
2018-10-22 14:17 ` [dpdk-dev] [PATCH v4 07/15] crypto/caam_jr: add queue pair config ops Gagandeep Singh
2018-10-22 14:17 ` [dpdk-dev] [PATCH v4 08/15] crypto/caam_jr: add session configuration methods Gagandeep Singh
2018-10-22 14:17 ` [dpdk-dev] [PATCH v4 09/15] crypto/caam_jr: add device cababilities Gagandeep Singh
2018-10-22 14:17 ` [dpdk-dev] [PATCH v4 10/15] crypto/caam_jr: add enqueue dequeue operations Gagandeep Singh
2018-10-22 14:17 ` [dpdk-dev] [PATCH v4 11/15] crypto/caam_jr: add scatter gather Gagandeep Singh
2018-10-22 14:17 ` [dpdk-dev] [PATCH v4 12/15] crypto/caam_jr: add statistics ops Gagandeep Singh
2018-10-22 14:18 ` [dpdk-dev] [PATCH v4 13/15] crypto/caam_jr: add security offload Gagandeep Singh
2018-10-22 14:18 ` [dpdk-dev] [PATCH v4 14/15] doc: add caam jr cryptodev details Gagandeep Singh
2018-10-22 14:18 ` [dpdk-dev] [PATCH v4 15/15] test/crypto: add CAAM JR driver validation test cases Gagandeep Singh
2018-10-22 14:48 ` [dpdk-dev] [PATCH v4 00/15] Introducing the NXP CAAM job ring driver Gagandeep Singh
2018-10-22 14:57 ` [dpdk-dev] [PATCH v5 " Gagandeep Singh
2018-10-22 14:57 ` [dpdk-dev] [PATCH v5 01/15] crypto/caam_jr: introduce basic driver Gagandeep Singh
2018-10-22 14:57 ` [dpdk-dev] [PATCH v5 02/15] crypto/caam_jr: add HW tuning options Gagandeep Singh
2018-10-22 14:57 ` [dpdk-dev] [PATCH v5 03/15] crypto/caam_jr: add routines to configure HW Gagandeep Singh
2018-10-22 14:57 ` [dpdk-dev] [PATCH v5 04/15] crypto/caam_jr: add UIO specific operations Gagandeep Singh
2018-10-28 0:35 ` Ferruh Yigit
2018-10-29 12:24 ` Gagandeep Singh
2018-10-22 14:57 ` [dpdk-dev] [PATCH v5 05/15] crypto/caam_jr: add basic job ring routines Gagandeep Singh
2018-10-22 14:57 ` [dpdk-dev] [PATCH v5 06/15] crypto/caam_jr: add device basic ops Gagandeep Singh
2018-10-22 14:57 ` [dpdk-dev] [PATCH v5 07/15] crypto/caam_jr: add queue pair config ops Gagandeep Singh
2018-10-22 14:57 ` [dpdk-dev] [PATCH v5 08/15] crypto/caam_jr: add session configuration methods Gagandeep Singh
2018-10-22 14:57 ` [dpdk-dev] [PATCH v5 09/15] crypto/caam_jr: add device cababilities Gagandeep Singh
2018-10-22 14:57 ` [dpdk-dev] [PATCH v5 10/15] crypto/caam_jr: add enqueue dequeue operations Gagandeep Singh
2018-10-22 14:57 ` [dpdk-dev] [PATCH v5 11/15] crypto/caam_jr: add scatter gather Gagandeep Singh
2018-10-22 14:57 ` [dpdk-dev] [PATCH v5 12/15] crypto/caam_jr: add statistics ops Gagandeep Singh
2018-10-22 14:57 ` [dpdk-dev] [PATCH v5 13/15] crypto/caam_jr: add security offload Gagandeep Singh
2018-10-22 14:57 ` [dpdk-dev] [PATCH v5 14/15] doc: add caam jr cryptodev details Gagandeep Singh
2018-10-22 14:57 ` [dpdk-dev] [PATCH v5 15/15] test/crypto: add CAAM JR driver validation test cases Gagandeep Singh
2018-10-22 20:30 ` [dpdk-dev] [PATCH v5 00/15] Introducing the NXP CAAM job ring driver Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181012144055.9461-14-g.singh@nxp.com \
--to=g.singh@nxp.com \
--cc=akhil.goyal@nxp.com \
--cc=dev@dpdk.org \
--cc=hemant.agrawal@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).