From: Yongseok Koh <yskoh@mellanox.com>
To: Shahaf Shuler <shahafs@mellanox.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>, Yongseok Koh <yskoh@mellanox.com>,
Ori Kam <orika@mellanox.com>
Subject: [dpdk-dev] [PATCH 1/3] net/mlx5: fix Verbs flow tunnel
Date: Fri, 2 Nov 2018 21:08:20 +0000 [thread overview]
Message-ID: <20181102210801.28370-1-yskoh@mellanox.com> (raw)
1) Fix layer parsing
In translation of tunneled flows, dev_flow->layers must not be used to
check tunneled layer as it contains all the layers parsed from
flow_drv_prepare(). Checking tunneled layer is needed to set
IBV_FLOW_SPEC_INNER and it should be based on dynamic parsing. With
dev_flow->layers on a tunneled flow, items will always be interpreted as
inner as dev_flow->layer already has all the items.
2) Refactoring code
It is partly because flow_verbs_translate_item_*() sets layer flag. Same
code is repeating in multiple locations and that could be error-prone.
- Introduce VERBS_SPEC_INNER() to unify setting IBV_FLOW_SPEC_INNER.
- flow_verbs_translate_item_*() doesn't set parsing result -
MLX5_FLOW_LAYER_*.
- flow_verbs_translate_item_*() doesn't set priority or adjust hashfields
but does only item translation. Both have to be done outside.
- Make more consistent between Verbs and DV.
3) Remove flow_verbs_mark_update()
This code can never be reached as validation prohibits specifying mark and
flag actions together. No need to convert flag to mark.
Fixes: 84c406e74524 ("net/mlx5: add flow translate function")
Cc: orika@mellanox.com
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
---
drivers/net/mlx5/mlx5_flow_verbs.c | 568 +++++++++++++++++--------------------
1 file changed, 258 insertions(+), 310 deletions(-)
diff --git a/drivers/net/mlx5/mlx5_flow_verbs.c b/drivers/net/mlx5/mlx5_flow_verbs.c
index 2e506b91ad..ab58c04db5 100644
--- a/drivers/net/mlx5/mlx5_flow_verbs.c
+++ b/drivers/net/mlx5/mlx5_flow_verbs.c
@@ -33,6 +33,9 @@
#include "mlx5_glue.h"
#include "mlx5_flow.h"
+#define VERBS_SPEC_INNER(item_flags) \
+ (!!((item_flags) & MLX5_FLOW_LAYER_TUNNEL) ? IBV_FLOW_SPEC_INNER : 0)
+
/**
* Create Verbs flow counter with Verbs library.
*
@@ -231,27 +234,26 @@ flow_verbs_counter_query(struct rte_eth_dev *dev __rte_unused,
}
/**
- * Add a verbs item specification into @p flow.
+ * Add a verbs item specification into @p verbs.
*
- * @param[in, out] flow
- * Pointer to flow structure.
+ * @param[out] verbs
+ * Pointer to verbs structure.
* @param[in] src
* Create specification.
* @param[in] size
* Size in bytes of the specification to copy.
*/
static void
-flow_verbs_spec_add(struct mlx5_flow *flow, void *src, unsigned int size)
+flow_verbs_spec_add(struct mlx5_flow_verbs *verbs, void *src, unsigned int size)
{
- struct mlx5_flow_verbs *verbs = &flow->verbs;
+ void *dst;
- if (verbs->specs) {
- void *dst;
-
- dst = (void *)(verbs->specs + verbs->size);
- memcpy(dst, src, size);
- ++verbs->attr->num_of_specs;
- }
+ if (!verbs)
+ return;
+ assert(verbs->specs);
+ dst = (void *)(verbs->specs + verbs->size);
+ memcpy(dst, src, size);
+ ++verbs->attr->num_of_specs;
verbs->size += size;
}
@@ -260,24 +262,23 @@ flow_verbs_spec_add(struct mlx5_flow *flow, void *src, unsigned int size)
* the input is valid and that there is space to insert the requested item
* into the flow.
*
+ * @param[in, out] dev_flow
+ * Pointer to dev_flow structure.
* @param[in] item
* Item specification.
* @param[in] item_flags
- * Bit field with all detected items.
- * @param[in, out] dev_flow
- * Pointer to dev_flow structure.
+ * Parsed item flags.
*/
static void
-flow_verbs_translate_item_eth(const struct rte_flow_item *item,
- uint64_t *item_flags,
- struct mlx5_flow *dev_flow)
+flow_verbs_translate_item_eth(struct mlx5_flow *dev_flow,
+ const struct rte_flow_item *item,
+ uint64_t item_flags)
{
const struct rte_flow_item_eth *spec = item->spec;
const struct rte_flow_item_eth *mask = item->mask;
- const int tunnel = !!(*item_flags & MLX5_FLOW_LAYER_TUNNEL);
const unsigned int size = sizeof(struct ibv_flow_spec_eth);
struct ibv_flow_spec_eth eth = {
- .type = IBV_FLOW_SPEC_ETH | (tunnel ? IBV_FLOW_SPEC_INNER : 0),
+ .type = IBV_FLOW_SPEC_ETH | VERBS_SPEC_INNER(item_flags),
.size = size,
};
@@ -298,11 +299,8 @@ flow_verbs_translate_item_eth(const struct rte_flow_item *item,
eth.val.src_mac[i] &= eth.mask.src_mac[i];
}
eth.val.ether_type &= eth.mask.ether_type;
- dev_flow->verbs.attr->priority = MLX5_PRIORITY_MAP_L2;
}
- flow_verbs_spec_add(dev_flow, ð, size);
- *item_flags |= tunnel ? MLX5_FLOW_LAYER_INNER_L2 :
- MLX5_FLOW_LAYER_OUTER_L2;
+ flow_verbs_spec_add(&dev_flow->verbs, ð, size);
}
/**
@@ -344,24 +342,24 @@ flow_verbs_item_vlan_update(struct ibv_flow_attr *attr,
* the input is valid and that there is space to insert the requested item
* into the flow.
*
- * @param[in] item
- * Item specification.
- * @param[in, out] item_flags
- * Bit mask that holds all detected items.
* @param[in, out] dev_flow
* Pointer to dev_flow structure.
+ * @param[in] item
+ * Item specification.
+ * @param[in] item_flags
+ * Parsed item flags.
*/
static void
-flow_verbs_translate_item_vlan(const struct rte_flow_item *item,
- uint64_t *item_flags,
- struct mlx5_flow *dev_flow)
+flow_verbs_translate_item_vlan(struct mlx5_flow *dev_flow,
+ const struct rte_flow_item *item,
+ uint64_t item_flags)
{
const struct rte_flow_item_vlan *spec = item->spec;
const struct rte_flow_item_vlan *mask = item->mask;
unsigned int size = sizeof(struct ibv_flow_spec_eth);
- const int tunnel = !!(*item_flags & MLX5_FLOW_LAYER_TUNNEL);
+ const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
struct ibv_flow_spec_eth eth = {
- .type = IBV_FLOW_SPEC_ETH | (tunnel ? IBV_FLOW_SPEC_INNER : 0),
+ .type = IBV_FLOW_SPEC_ETH | VERBS_SPEC_INNER(item_flags),
.size = size,
};
const uint32_t l2m = tunnel ? MLX5_FLOW_LAYER_INNER_L2 :
@@ -377,16 +375,10 @@ flow_verbs_translate_item_vlan(const struct rte_flow_item *item,
eth.mask.ether_type = mask->inner_type;
eth.val.ether_type &= eth.mask.ether_type;
}
- if (!(*item_flags & l2m)) {
- dev_flow->verbs.attr->priority = MLX5_PRIORITY_MAP_L2;
- flow_verbs_spec_add(dev_flow, ð, size);
- } else {
+ if (!(item_flags & l2m))
+ flow_verbs_spec_add(&dev_flow->verbs, ð, size);
+ else
flow_verbs_item_vlan_update(dev_flow->verbs.attr, ð);
- size = 0; /* Only an update is done in eth specification. */
- }
- *item_flags |= tunnel ?
- (MLX5_FLOW_LAYER_INNER_L2 | MLX5_FLOW_LAYER_INNER_VLAN) :
- (MLX5_FLOW_LAYER_OUTER_L2 | MLX5_FLOW_LAYER_OUTER_VLAN);
}
/**
@@ -394,32 +386,28 @@ flow_verbs_translate_item_vlan(const struct rte_flow_item *item,
* the input is valid and that there is space to insert the requested item
* into the flow.
*
+ * @param[in, out] dev_flow
+ * Pointer to dev_flow structure.
* @param[in] item
* Item specification.
- * @param[in, out] item_flags
- * Bit mask that marks all detected items.
- * @param[in, out] dev_flow
- * Pointer to sepacific flow structure.
+ * @param[in] item_flags
+ * Parsed item flags.
*/
static void
-flow_verbs_translate_item_ipv4(const struct rte_flow_item *item,
- uint64_t *item_flags,
- struct mlx5_flow *dev_flow)
+flow_verbs_translate_item_ipv4(struct mlx5_flow *dev_flow,
+ const struct rte_flow_item *item,
+ uint64_t item_flags)
{
const struct rte_flow_item_ipv4 *spec = item->spec;
const struct rte_flow_item_ipv4 *mask = item->mask;
- const int tunnel = !!(*item_flags & MLX5_FLOW_LAYER_TUNNEL);
unsigned int size = sizeof(struct ibv_flow_spec_ipv4_ext);
struct ibv_flow_spec_ipv4_ext ipv4 = {
- .type = IBV_FLOW_SPEC_IPV4_EXT |
- (tunnel ? IBV_FLOW_SPEC_INNER : 0),
+ .type = IBV_FLOW_SPEC_IPV4_EXT | VERBS_SPEC_INNER(item_flags),
.size = size,
};
if (!mask)
mask = &rte_flow_item_ipv4_mask;
- *item_flags |= tunnel ? MLX5_FLOW_LAYER_INNER_L3_IPV4 :
- MLX5_FLOW_LAYER_OUTER_L3_IPV4;
if (spec) {
ipv4.val = (struct ibv_flow_ipv4_ext_filter){
.src_ip = spec->hdr.src_addr,
@@ -439,12 +427,7 @@ flow_verbs_translate_item_ipv4(const struct rte_flow_item *item,
ipv4.val.proto &= ipv4.mask.proto;
ipv4.val.tos &= ipv4.mask.tos;
}
- dev_flow->verbs.hash_fields |=
- mlx5_flow_hashfields_adjust(dev_flow, tunnel,
- MLX5_IPV4_LAYER_TYPES,
- MLX5_IPV4_IBV_RX_HASH);
- dev_flow->verbs.attr->priority = MLX5_PRIORITY_MAP_L3;
- flow_verbs_spec_add(dev_flow, &ipv4, size);
+ flow_verbs_spec_add(&dev_flow->verbs, &ipv4, size);
}
/**
@@ -452,31 +435,28 @@ flow_verbs_translate_item_ipv4(const struct rte_flow_item *item,
* the input is valid and that there is space to insert the requested item
* into the flow.
*
+ * @param[in, out] dev_flow
+ * Pointer to dev_flow structure.
* @param[in] item
* Item specification.
- * @param[in, out] item_flags
- * Bit mask that marks all detected items.
- * @param[in, out] dev_flow
- * Pointer to sepacific flow structure.
+ * @param[in] item_flags
+ * Parsed item flags.
*/
static void
-flow_verbs_translate_item_ipv6(const struct rte_flow_item *item,
- uint64_t *item_flags,
- struct mlx5_flow *dev_flow)
+flow_verbs_translate_item_ipv6(struct mlx5_flow *dev_flow,
+ const struct rte_flow_item *item,
+ uint64_t item_flags)
{
const struct rte_flow_item_ipv6 *spec = item->spec;
const struct rte_flow_item_ipv6 *mask = item->mask;
- const int tunnel = !!(dev_flow->layers & MLX5_FLOW_LAYER_TUNNEL);
unsigned int size = sizeof(struct ibv_flow_spec_ipv6);
struct ibv_flow_spec_ipv6 ipv6 = {
- .type = IBV_FLOW_SPEC_IPV6 | (tunnel ? IBV_FLOW_SPEC_INNER : 0),
+ .type = IBV_FLOW_SPEC_IPV6 | VERBS_SPEC_INNER(item_flags),
.size = size,
};
if (!mask)
mask = &rte_flow_item_ipv6_mask;
- *item_flags |= tunnel ? MLX5_FLOW_LAYER_INNER_L3_IPV6 :
- MLX5_FLOW_LAYER_OUTER_L3_IPV6;
if (spec) {
unsigned int i;
uint32_t vtc_flow_val;
@@ -516,12 +496,7 @@ flow_verbs_translate_item_ipv6(const struct rte_flow_item *item,
ipv6.val.next_hdr &= ipv6.mask.next_hdr;
ipv6.val.hop_limit &= ipv6.mask.hop_limit;
}
- dev_flow->verbs.hash_fields |=
- mlx5_flow_hashfields_adjust(dev_flow, tunnel,
- MLX5_IPV6_LAYER_TYPES,
- MLX5_IPV6_IBV_RX_HASH);
- dev_flow->verbs.attr->priority = MLX5_PRIORITY_MAP_L3;
- flow_verbs_spec_add(dev_flow, &ipv6, size);
+ flow_verbs_spec_add(&dev_flow->verbs, &ipv6, size);
}
/**
@@ -529,46 +504,38 @@ flow_verbs_translate_item_ipv6(const struct rte_flow_item *item,
* the input is valid and that there is space to insert the requested item
* into the flow.
*
+ * @param[in, out] dev_flow
+ * Pointer to dev_flow structure.
* @param[in] item
* Item specification.
- * @param[in, out] item_flags
- * Bit mask that marks all detected items.
- * @param[in, out] dev_flow
- * Pointer to sepacific flow structure.
+ * @param[in] item_flags
+ * Parsed item flags.
*/
static void
-flow_verbs_translate_item_udp(const struct rte_flow_item *item,
- uint64_t *item_flags,
- struct mlx5_flow *dev_flow)
+flow_verbs_translate_item_tcp(struct mlx5_flow *dev_flow,
+ const struct rte_flow_item *item,
+ uint64_t item_flags __rte_unused)
{
- const struct rte_flow_item_udp *spec = item->spec;
- const struct rte_flow_item_udp *mask = item->mask;
- const int tunnel = !!(*item_flags & MLX5_FLOW_LAYER_TUNNEL);
+ const struct rte_flow_item_tcp *spec = item->spec;
+ const struct rte_flow_item_tcp *mask = item->mask;
unsigned int size = sizeof(struct ibv_flow_spec_tcp_udp);
- struct ibv_flow_spec_tcp_udp udp = {
- .type = IBV_FLOW_SPEC_UDP | (tunnel ? IBV_FLOW_SPEC_INNER : 0),
+ struct ibv_flow_spec_tcp_udp tcp = {
+ .type = IBV_FLOW_SPEC_TCP | VERBS_SPEC_INNER(item_flags),
.size = size,
};
if (!mask)
- mask = &rte_flow_item_udp_mask;
- *item_flags |= tunnel ? MLX5_FLOW_LAYER_INNER_L4_UDP :
- MLX5_FLOW_LAYER_OUTER_L4_UDP;
+ mask = &rte_flow_item_tcp_mask;
if (spec) {
- udp.val.dst_port = spec->hdr.dst_port;
- udp.val.src_port = spec->hdr.src_port;
- udp.mask.dst_port = mask->hdr.dst_port;
- udp.mask.src_port = mask->hdr.src_port;
+ tcp.val.dst_port = spec->hdr.dst_port;
+ tcp.val.src_port = spec->hdr.src_port;
+ tcp.mask.dst_port = mask->hdr.dst_port;
+ tcp.mask.src_port = mask->hdr.src_port;
/* Remove unwanted bits from values. */
- udp.val.src_port &= udp.mask.src_port;
- udp.val.dst_port &= udp.mask.dst_port;
+ tcp.val.src_port &= tcp.mask.src_port;
+ tcp.val.dst_port &= tcp.mask.dst_port;
}
- dev_flow->verbs.hash_fields |=
- mlx5_flow_hashfields_adjust(dev_flow, tunnel, ETH_RSS_UDP,
- (IBV_RX_HASH_SRC_PORT_UDP |
- IBV_RX_HASH_DST_PORT_UDP));
- dev_flow->verbs.attr->priority = MLX5_PRIORITY_MAP_L4;
- flow_verbs_spec_add(dev_flow, &udp, size);
+ flow_verbs_spec_add(&dev_flow->verbs, &tcp, size);
}
/**
@@ -576,46 +543,38 @@ flow_verbs_translate_item_udp(const struct rte_flow_item *item,
* the input is valid and that there is space to insert the requested item
* into the flow.
*
+ * @param[in, out] dev_flow
+ * Pointer to dev_flow structure.
* @param[in] item
* Item specification.
- * @param[in, out] item_flags
- * Bit mask that marks all detected items.
- * @param[in, out] dev_flow
- * Pointer to sepacific flow structure.
+ * @param[in] item_flags
+ * Parsed item flags.
*/
static void
-flow_verbs_translate_item_tcp(const struct rte_flow_item *item,
- uint64_t *item_flags,
- struct mlx5_flow *dev_flow)
+flow_verbs_translate_item_udp(struct mlx5_flow *dev_flow,
+ const struct rte_flow_item *item,
+ uint64_t item_flags __rte_unused)
{
- const struct rte_flow_item_tcp *spec = item->spec;
- const struct rte_flow_item_tcp *mask = item->mask;
- const int tunnel = !!(dev_flow->layers & MLX5_FLOW_LAYER_TUNNEL);
+ const struct rte_flow_item_udp *spec = item->spec;
+ const struct rte_flow_item_udp *mask = item->mask;
unsigned int size = sizeof(struct ibv_flow_spec_tcp_udp);
- struct ibv_flow_spec_tcp_udp tcp = {
- .type = IBV_FLOW_SPEC_TCP | (tunnel ? IBV_FLOW_SPEC_INNER : 0),
+ struct ibv_flow_spec_tcp_udp udp = {
+ .type = IBV_FLOW_SPEC_UDP | VERBS_SPEC_INNER(item_flags),
.size = size,
};
if (!mask)
- mask = &rte_flow_item_tcp_mask;
- *item_flags |= tunnel ? MLX5_FLOW_LAYER_INNER_L4_TCP :
- MLX5_FLOW_LAYER_OUTER_L4_TCP;
+ mask = &rte_flow_item_udp_mask;
if (spec) {
- tcp.val.dst_port = spec->hdr.dst_port;
- tcp.val.src_port = spec->hdr.src_port;
- tcp.mask.dst_port = mask->hdr.dst_port;
- tcp.mask.src_port = mask->hdr.src_port;
+ udp.val.dst_port = spec->hdr.dst_port;
+ udp.val.src_port = spec->hdr.src_port;
+ udp.mask.dst_port = mask->hdr.dst_port;
+ udp.mask.src_port = mask->hdr.src_port;
/* Remove unwanted bits from values. */
- tcp.val.src_port &= tcp.mask.src_port;
- tcp.val.dst_port &= tcp.mask.dst_port;
+ udp.val.src_port &= udp.mask.src_port;
+ udp.val.dst_port &= udp.mask.dst_port;
}
- dev_flow->verbs.hash_fields |=
- mlx5_flow_hashfields_adjust(dev_flow, tunnel, ETH_RSS_TCP,
- (IBV_RX_HASH_SRC_PORT_TCP |
- IBV_RX_HASH_DST_PORT_TCP));
- dev_flow->verbs.attr->priority = MLX5_PRIORITY_MAP_L4;
- flow_verbs_spec_add(dev_flow, &tcp, size);
+ flow_verbs_spec_add(&dev_flow->verbs, &udp, size);
}
/**
@@ -623,17 +582,17 @@ flow_verbs_translate_item_tcp(const struct rte_flow_item *item,
* the input is valid and that there is space to insert the requested item
* into the flow.
*
+ * @param[in, out] dev_flow
+ * Pointer to dev_flow structure.
* @param[in] item
* Item specification.
- * @param[in, out] item_flags
- * Bit mask that marks all detected items.
- * @param[in, out] dev_flow
- * Pointer to sepacific flow structure.
+ * @param[in] item_flags
+ * Parsed item flags.
*/
static void
-flow_verbs_translate_item_vxlan(const struct rte_flow_item *item,
- uint64_t *item_flags,
- struct mlx5_flow *dev_flow)
+flow_verbs_translate_item_vxlan(struct mlx5_flow *dev_flow,
+ const struct rte_flow_item *item,
+ uint64_t item_flags __rte_unused)
{
const struct rte_flow_item_vxlan *spec = item->spec;
const struct rte_flow_item_vxlan *mask = item->mask;
@@ -657,9 +616,7 @@ flow_verbs_translate_item_vxlan(const struct rte_flow_item *item,
/* Remove unwanted bits from values. */
vxlan.val.tunnel_id &= vxlan.mask.tunnel_id;
}
- flow_verbs_spec_add(dev_flow, &vxlan, size);
- dev_flow->verbs.attr->priority = MLX5_PRIORITY_MAP_L2;
- *item_flags |= MLX5_FLOW_LAYER_VXLAN;
+ flow_verbs_spec_add(&dev_flow->verbs, &vxlan, size);
}
/**
@@ -667,17 +624,17 @@ flow_verbs_translate_item_vxlan(const struct rte_flow_item *item,
* the input is valid and that there is space to insert the requested item
* into the flow.
*
+ * @param[in, out] dev_flow
+ * Pointer to dev_flow structure.
* @param[in] item
* Item specification.
- * @param[in, out] item_flags
- * Bit mask that marks all detected items.
- * @param[in, out] dev_flow
- * Pointer to sepacific flow structure.
+ * @param[in] item_flags
+ * Parsed item flags.
*/
static void
-flow_verbs_translate_item_vxlan_gpe(const struct rte_flow_item *item,
- uint64_t *item_flags,
- struct mlx5_flow *dev_flow)
+flow_verbs_translate_item_vxlan_gpe(struct mlx5_flow *dev_flow,
+ const struct rte_flow_item *item,
+ uint64_t item_flags __rte_unused)
{
const struct rte_flow_item_vxlan_gpe *spec = item->spec;
const struct rte_flow_item_vxlan_gpe *mask = item->mask;
@@ -701,9 +658,7 @@ flow_verbs_translate_item_vxlan_gpe(const struct rte_flow_item *item,
/* Remove unwanted bits from values. */
vxlan_gpe.val.tunnel_id &= vxlan_gpe.mask.tunnel_id;
}
- flow_verbs_spec_add(dev_flow, &vxlan_gpe, size);
- dev_flow->verbs.attr->priority = MLX5_PRIORITY_MAP_L2;
- *item_flags |= MLX5_FLOW_LAYER_VXLAN_GPE;
+ flow_verbs_spec_add(&dev_flow->verbs, &vxlan_gpe, size);
}
/**
@@ -763,17 +718,17 @@ flow_verbs_item_gre_ip_protocol_update(struct ibv_flow_attr *attr,
* the input is valid and that there is space to insert the requested item
* into the flow.
*
+ * @param[in, out] dev_flow
+ * Pointer to dev_flow structure.
* @param[in] item
* Item specification.
- * @param[in, out] item_flags
- * Bit mask that marks all detected items.
- * @param[in, out] dev_flow
- * Pointer to sepacific flow structure.
+ * @param[in] item_flags
+ * Parsed item flags.
*/
static void
-flow_verbs_translate_item_gre(const struct rte_flow_item *item __rte_unused,
- uint64_t *item_flags,
- struct mlx5_flow *dev_flow)
+flow_verbs_translate_item_gre(struct mlx5_flow *dev_flow,
+ const struct rte_flow_item *item __rte_unused,
+ uint64_t item_flags)
{
struct mlx5_flow_verbs *verbs = &dev_flow->verbs;
#ifndef HAVE_IBV_DEVICE_MPLS_SUPPORT
@@ -804,7 +759,7 @@ flow_verbs_translate_item_gre(const struct rte_flow_item *item __rte_unused,
tunnel.val.key &= tunnel.mask.key;
}
#endif
- if (*item_flags & MLX5_FLOW_LAYER_OUTER_L3_IPV4)
+ if (item_flags & MLX5_FLOW_LAYER_OUTER_L3_IPV4)
flow_verbs_item_gre_ip_protocol_update(verbs->attr,
IBV_FLOW_SPEC_IPV4_EXT,
IPPROTO_GRE);
@@ -812,9 +767,7 @@ flow_verbs_translate_item_gre(const struct rte_flow_item *item __rte_unused,
flow_verbs_item_gre_ip_protocol_update(verbs->attr,
IBV_FLOW_SPEC_IPV6,
IPPROTO_GRE);
- flow_verbs_spec_add(dev_flow, &tunnel, size);
- verbs->attr->priority = MLX5_PRIORITY_MAP_L2;
- *item_flags |= MLX5_FLOW_LAYER_GRE;
+ flow_verbs_spec_add(verbs, &tunnel, size);
}
/**
@@ -822,17 +775,17 @@ flow_verbs_translate_item_gre(const struct rte_flow_item *item __rte_unused,
* the input is valid and that there is space to insert the requested action
* into the flow. This function also return the action that was added.
*
+ * @param[in, out] dev_flow
+ * Pointer to dev_flow structure.
* @param[in] item
* Item specification.
- * @param[in, out] item_flags
- * Bit mask that marks all detected items.
- * @param[in, out] dev_flow
- * Pointer to sepacific flow structure.
+ * @param[in] item_flags
+ * Parsed item flags.
*/
static void
-flow_verbs_translate_item_mpls(const struct rte_flow_item *item __rte_unused,
- uint64_t *action_flags __rte_unused,
- struct mlx5_flow *dev_flow __rte_unused)
+flow_verbs_translate_item_mpls(struct mlx5_flow *dev_flow __rte_unused,
+ const struct rte_flow_item *item __rte_unused,
+ uint64_t item_flags __rte_unused)
{
#ifdef HAVE_IBV_DEVICE_MPLS_SUPPORT
const struct rte_flow_item_mpls *spec = item->spec;
@@ -851,25 +804,24 @@ flow_verbs_translate_item_mpls(const struct rte_flow_item *item __rte_unused,
/* Remove unwanted bits from values. */
mpls.val.label &= mpls.mask.label;
}
- flow_verbs_spec_add(dev_flow, &mpls, size);
- dev_flow->verbs.attr->priority = MLX5_PRIORITY_MAP_L2;
- *action_flags |= MLX5_FLOW_LAYER_MPLS;
+ flow_verbs_spec_add(&dev_flow->verbs, &mpls, size);
#endif
}
/**
* Convert the @p action into a Verbs specification. This function assumes that
* the input is valid and that there is space to insert the requested action
- * into the flow. This function also return the action that was added.
+ * into the flow.
*
- * @param[in, out] action_flags
- * Pointer to the detected actions.
* @param[in] dev_flow
* Pointer to mlx5_flow.
+ * @param[in] action
+ * Action configuration.
*/
static void
-flow_verbs_translate_action_drop(uint64_t *action_flags,
- struct mlx5_flow *dev_flow)
+flow_verbs_translate_action_drop
+ (struct mlx5_flow *dev_flow,
+ const struct rte_flow_action *action __rte_unused)
{
unsigned int size = sizeof(struct ibv_flow_spec_action_drop);
struct ibv_flow_spec_action_drop drop = {
@@ -877,26 +829,22 @@ flow_verbs_translate_action_drop(uint64_t *action_flags,
.size = size,
};
- flow_verbs_spec_add(dev_flow, &drop, size);
- *action_flags |= MLX5_FLOW_ACTION_DROP;
+ flow_verbs_spec_add(&dev_flow->verbs, &drop, size);
}
/**
* Convert the @p action into a Verbs specification. This function assumes that
* the input is valid and that there is space to insert the requested action
- * into the flow. This function also return the action that was added.
+ * into the flow.
*
- * @param[in] action
- * Action configuration.
- * @param[in, out] action_flags
- * Pointer to the detected actions.
* @param[in] dev_flow
* Pointer to mlx5_flow.
+ * @param[in] action
+ * Action configuration.
*/
static void
-flow_verbs_translate_action_queue(const struct rte_flow_action *action,
- uint64_t *action_flags,
- struct mlx5_flow *dev_flow)
+flow_verbs_translate_action_queue(struct mlx5_flow *dev_flow,
+ const struct rte_flow_action *action)
{
const struct rte_flow_action_queue *queue = action->conf;
struct rte_flow *flow = dev_flow->flow;
@@ -904,13 +852,12 @@ flow_verbs_translate_action_queue(const struct rte_flow_action *action,
if (flow->queue)
(*flow->queue)[0] = queue->index;
flow->rss.queue_num = 1;
- *action_flags |= MLX5_FLOW_ACTION_QUEUE;
}
/**
* Convert the @p action into a Verbs specification. This function assumes that
* the input is valid and that there is space to insert the requested action
- * into the flow. This function also return the action that was added.
+ * into the flow.
*
* @param[in] action
* Action configuration.
@@ -920,9 +867,8 @@ flow_verbs_translate_action_queue(const struct rte_flow_action *action,
* Pointer to mlx5_flow.
*/
static void
-flow_verbs_translate_action_rss(const struct rte_flow_action *action,
- uint64_t *action_flags,
- struct mlx5_flow *dev_flow)
+flow_verbs_translate_action_rss(struct mlx5_flow *dev_flow,
+ const struct rte_flow_action *action)
{
const struct rte_flow_action_rss *rss = action->conf;
struct rte_flow *flow = dev_flow->flow;
@@ -934,26 +880,22 @@ flow_verbs_translate_action_rss(const struct rte_flow_action *action,
memcpy(flow->key, rss->key, MLX5_RSS_HASH_KEY_LEN);
flow->rss.types = rss->types;
flow->rss.level = rss->level;
- *action_flags |= MLX5_FLOW_ACTION_RSS;
}
/**
* Convert the @p action into a Verbs specification. This function assumes that
* the input is valid and that there is space to insert the requested action
- * into the flow. This function also return the action that was added.
+ * into the flow.
*
- * @param[in] action
- * Action configuration.
- * @param[in, out] action_flags
- * Pointer to the detected actions.
* @param[in] dev_flow
* Pointer to mlx5_flow.
+ * @param[in] action
+ * Action configuration.
*/
static void
flow_verbs_translate_action_flag
- (const struct rte_flow_action *action __rte_unused,
- uint64_t *action_flags,
- struct mlx5_flow *dev_flow)
+ (struct mlx5_flow *dev_flow,
+ const struct rte_flow_action *action __rte_unused)
{
unsigned int size = sizeof(struct ibv_flow_spec_action_tag);
struct ibv_flow_spec_action_tag tag = {
@@ -961,87 +903,44 @@ flow_verbs_translate_action_flag
.size = size,
.tag_id = mlx5_flow_mark_set(MLX5_FLOW_MARK_DEFAULT),
};
- *action_flags |= MLX5_FLOW_ACTION_MARK;
- flow_verbs_spec_add(dev_flow, &tag, size);
-}
-/**
- * Update verbs specification to modify the flag to mark.
- *
- * @param[in, out] verbs
- * Pointer to the mlx5_flow_verbs structure.
- * @param[in] mark_id
- * Mark identifier to replace the flag.
- */
-static void
-flow_verbs_mark_update(struct mlx5_flow_verbs *verbs, uint32_t mark_id)
-{
- struct ibv_spec_header *hdr;
- int i;
-
- if (!verbs)
- return;
- /* Update Verbs specification. */
- hdr = (struct ibv_spec_header *)verbs->specs;
- if (!hdr)
- return;
- for (i = 0; i != verbs->attr->num_of_specs; ++i) {
- if (hdr->type == IBV_FLOW_SPEC_ACTION_TAG) {
- struct ibv_flow_spec_action_tag *t =
- (struct ibv_flow_spec_action_tag *)hdr;
-
- t->tag_id = mlx5_flow_mark_set(mark_id);
- }
- hdr = (struct ibv_spec_header *)((uintptr_t)hdr + hdr->size);
- }
+ flow_verbs_spec_add(&dev_flow->verbs, &tag, size);
}
/**
* Convert the @p action into a Verbs specification. This function assumes that
* the input is valid and that there is space to insert the requested action
- * into the flow. This function also return the action that was added.
+ * into the flow.
*
- * @param[in] action
- * Action configuration.
- * @param[in, out] action_flags
- * Pointer to the detected actions.
* @param[in] dev_flow
* Pointer to mlx5_flow.
+ * @param[in] action
+ * Action configuration.
*/
static void
-flow_verbs_translate_action_mark(const struct rte_flow_action *action,
- uint64_t *action_flags,
- struct mlx5_flow *dev_flow)
+flow_verbs_translate_action_mark(struct mlx5_flow *dev_flow,
+ const struct rte_flow_action *action)
{
const struct rte_flow_action_mark *mark = action->conf;
unsigned int size = sizeof(struct ibv_flow_spec_action_tag);
struct ibv_flow_spec_action_tag tag = {
.type = IBV_FLOW_SPEC_ACTION_TAG,
.size = size,
+ .tag_id = mlx5_flow_mark_set(mark->id),
};
- struct mlx5_flow_verbs *verbs = &dev_flow->verbs;
- if (*action_flags & MLX5_FLOW_ACTION_FLAG) {
- flow_verbs_mark_update(verbs, mark->id);
- size = 0;
- } else {
- tag.tag_id = mlx5_flow_mark_set(mark->id);
- flow_verbs_spec_add(dev_flow, &tag, size);
- }
- *action_flags |= MLX5_FLOW_ACTION_MARK;
+ flow_verbs_spec_add(&dev_flow->verbs, &tag, size);
}
/**
* Convert the @p action into a Verbs specification. This function assumes that
* the input is valid and that there is space to insert the requested action
- * into the flow. This function also return the action that was added.
+ * into the flow.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[in] action
* Action configuration.
- * @param[in, out] action_flags
- * Pointer to the detected actions.
* @param[in] dev_flow
* Pointer to mlx5_flow.
* @param[out] error
@@ -1051,10 +950,9 @@ flow_verbs_translate_action_mark(const struct rte_flow_action *action,
* 0 On success else a negative errno value is returned and rte_errno is set.
*/
static int
-flow_verbs_translate_action_count(struct rte_eth_dev *dev,
+flow_verbs_translate_action_count(struct mlx5_flow *dev_flow,
const struct rte_flow_action *action,
- uint64_t *action_flags,
- struct mlx5_flow *dev_flow,
+ struct rte_eth_dev *dev,
struct rte_flow_error *error)
{
const struct rte_flow_action_count *count = action->conf;
@@ -1078,13 +976,12 @@ flow_verbs_translate_action_count(struct rte_eth_dev *dev,
"cannot get counter"
" context.");
}
- *action_flags |= MLX5_FLOW_ACTION_COUNT;
#if defined(HAVE_IBV_DEVICE_COUNTERS_SET_V42)
counter.counter_set_handle = flow->counter->cs->handle;
- flow_verbs_spec_add(dev_flow, &counter, size);
+ flow_verbs_spec_add(&dev_flow->verbs, &counter, size);
#elif defined(HAVE_IBV_DEVICE_COUNTERS_SET_V45)
counter.counters = flow->counter->cs;
- flow_verbs_spec_add(dev_flow, &counter, size);
+ flow_verbs_spec_add(&dev_flow->verbs, &counter, size);
#endif
return 0;
}
@@ -1116,7 +1013,6 @@ flow_verbs_validate(struct rte_eth_dev *dev,
int ret;
uint64_t action_flags = 0;
uint64_t item_flags = 0;
- int tunnel = 0;
uint8_t next_protocol = 0xff;
if (items == NULL)
@@ -1125,9 +1021,9 @@ flow_verbs_validate(struct rte_eth_dev *dev,
if (ret < 0)
return ret;
for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
+ int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
int ret = 0;
- tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
switch (items->type) {
case RTE_FLOW_ITEM_TYPE_VOID:
break;
@@ -1144,8 +1040,10 @@ flow_verbs_validate(struct rte_eth_dev *dev,
error);
if (ret < 0)
return ret;
- item_flags |= tunnel ? MLX5_FLOW_LAYER_INNER_VLAN :
- MLX5_FLOW_LAYER_OUTER_VLAN;
+ item_flags |= tunnel ? (MLX5_FLOW_LAYER_INNER_L2 |
+ MLX5_FLOW_LAYER_INNER_VLAN) :
+ (MLX5_FLOW_LAYER_OUTER_L2 |
+ MLX5_FLOW_LAYER_OUTER_VLAN);
break;
case RTE_FLOW_ITEM_TYPE_IPV4:
ret = mlx5_flow_validate_item_ipv4(items, item_flags,
@@ -1395,8 +1293,11 @@ flow_verbs_get_items_and_size(const struct rte_flow_item items[],
break;
case RTE_FLOW_ITEM_TYPE_VLAN:
size += sizeof(struct ibv_flow_spec_eth);
- detected_items |= tunnel ? MLX5_FLOW_LAYER_INNER_VLAN :
- MLX5_FLOW_LAYER_OUTER_VLAN;
+ detected_items |=
+ tunnel ? (MLX5_FLOW_LAYER_INNER_L2 |
+ MLX5_FLOW_LAYER_INNER_VLAN) :
+ (MLX5_FLOW_LAYER_OUTER_L2 |
+ MLX5_FLOW_LAYER_OUTER_VLAN);
break;
case RTE_FLOW_ITEM_TYPE_IPV4:
size += sizeof(struct ibv_flow_spec_ipv4_ext);
@@ -1528,50 +1429,48 @@ flow_verbs_translate(struct rte_eth_dev *dev,
const struct rte_flow_action actions[],
struct rte_flow_error *error)
{
- uint64_t action_flags = 0;
+ struct rte_flow *flow = dev_flow->flow;
uint64_t item_flags = 0;
+ uint64_t action_flags = 0;
uint64_t priority = attr->priority;
+ uint32_t subpriority = 0;
struct priv *priv = dev->data->dev_private;
if (priority == MLX5_FLOW_PRIO_RSVD)
priority = priv->config.flow_prio - 1;
for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
int ret;
+
switch (actions->type) {
case RTE_FLOW_ACTION_TYPE_VOID:
break;
case RTE_FLOW_ACTION_TYPE_FLAG:
- flow_verbs_translate_action_flag(actions,
- &action_flags,
- dev_flow);
+ flow_verbs_translate_action_flag(dev_flow, actions);
+ action_flags |= MLX5_FLOW_ACTION_FLAG;
break;
case RTE_FLOW_ACTION_TYPE_MARK:
- flow_verbs_translate_action_mark(actions,
- &action_flags,
- dev_flow);
+ flow_verbs_translate_action_mark(dev_flow, actions);
+ action_flags |= MLX5_FLOW_ACTION_MARK;
break;
case RTE_FLOW_ACTION_TYPE_DROP:
- flow_verbs_translate_action_drop(&action_flags,
- dev_flow);
+ flow_verbs_translate_action_drop(dev_flow, actions);
+ action_flags |= MLX5_FLOW_ACTION_DROP;
break;
case RTE_FLOW_ACTION_TYPE_QUEUE:
- flow_verbs_translate_action_queue(actions,
- &action_flags,
- dev_flow);
+ flow_verbs_translate_action_queue(dev_flow, actions);
+ action_flags |= MLX5_FLOW_ACTION_QUEUE;
break;
case RTE_FLOW_ACTION_TYPE_RSS:
- flow_verbs_translate_action_rss(actions,
- &action_flags,
- dev_flow);
+ flow_verbs_translate_action_rss(dev_flow, actions);
+ action_flags |= MLX5_FLOW_ACTION_RSS;
break;
case RTE_FLOW_ACTION_TYPE_COUNT:
- ret = flow_verbs_translate_action_count(dev,
+ ret = flow_verbs_translate_action_count(dev_flow,
actions,
- &action_flags,
- dev_flow,
- error);
+ dev, error);
if (ret < 0)
return ret;
+ action_flags |= MLX5_FLOW_ACTION_COUNT;
break;
default:
return rte_flow_error_set(error, ENOTSUP,
@@ -1580,51 +1479,100 @@ flow_verbs_translate(struct rte_eth_dev *dev,
"action not supported");
}
}
- /* Device flow should have action flags by flow_drv_prepare(). */
- assert(dev_flow->flow->actions == action_flags);
+ flow->actions = action_flags;
for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
+ int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
+
switch (items->type) {
case RTE_FLOW_ITEM_TYPE_VOID:
break;
case RTE_FLOW_ITEM_TYPE_ETH:
- flow_verbs_translate_item_eth(items, &item_flags,
- dev_flow);
+ flow_verbs_translate_item_eth(dev_flow, items,
+ item_flags);
+ subpriority = MLX5_PRIORITY_MAP_L2;
+ item_flags |= tunnel ? MLX5_FLOW_LAYER_INNER_L2 :
+ MLX5_FLOW_LAYER_OUTER_L2;
break;
case RTE_FLOW_ITEM_TYPE_VLAN:
- flow_verbs_translate_item_vlan(items, &item_flags,
- dev_flow);
+ flow_verbs_translate_item_vlan(dev_flow, items,
+ item_flags);
+ subpriority = MLX5_PRIORITY_MAP_L2;
+ item_flags |= tunnel ? (MLX5_FLOW_LAYER_INNER_L2 |
+ MLX5_FLOW_LAYER_INNER_VLAN) :
+ (MLX5_FLOW_LAYER_OUTER_L2 |
+ MLX5_FLOW_LAYER_OUTER_VLAN);
break;
case RTE_FLOW_ITEM_TYPE_IPV4:
- flow_verbs_translate_item_ipv4(items, &item_flags,
- dev_flow);
+ flow_verbs_translate_item_ipv4(dev_flow, items,
+ item_flags);
+ subpriority = MLX5_PRIORITY_MAP_L3;
+ dev_flow->verbs.hash_fields |=
+ mlx5_flow_hashfields_adjust
+ (dev_flow, tunnel,
+ MLX5_IPV4_LAYER_TYPES,
+ MLX5_IPV4_IBV_RX_HASH);
+ item_flags |= tunnel ? MLX5_FLOW_LAYER_INNER_L3_IPV4 :
+ MLX5_FLOW_LAYER_OUTER_L3_IPV4;
break;
case RTE_FLOW_ITEM_TYPE_IPV6:
- flow_verbs_translate_item_ipv6(items, &item_flags,
- dev_flow);
- break;
- case RTE_FLOW_ITEM_TYPE_UDP:
- flow_verbs_translate_item_udp(items, &item_flags,
- dev_flow);
+ flow_verbs_translate_item_ipv6(dev_flow, items,
+ item_flags);
+ subpriority = MLX5_PRIORITY_MAP_L3;
+ dev_flow->verbs.hash_fields |=
+ mlx5_flow_hashfields_adjust
+ (dev_flow, tunnel,
+ MLX5_IPV6_LAYER_TYPES,
+ MLX5_IPV6_IBV_RX_HASH);
+ item_flags |= tunnel ? MLX5_FLOW_LAYER_INNER_L3_IPV6 :
+ MLX5_FLOW_LAYER_OUTER_L3_IPV6;
break;
case RTE_FLOW_ITEM_TYPE_TCP:
- flow_verbs_translate_item_tcp(items, &item_flags,
- dev_flow);
+ flow_verbs_translate_item_tcp(dev_flow, items,
+ item_flags);
+ subpriority = MLX5_PRIORITY_MAP_L4;
+ dev_flow->verbs.hash_fields |=
+ mlx5_flow_hashfields_adjust
+ (dev_flow, tunnel, ETH_RSS_TCP,
+ (IBV_RX_HASH_SRC_PORT_TCP |
+ IBV_RX_HASH_DST_PORT_TCP));
+ item_flags |= tunnel ? MLX5_FLOW_LAYER_INNER_L4_TCP :
+ MLX5_FLOW_LAYER_OUTER_L4_TCP;
+ break;
+ case RTE_FLOW_ITEM_TYPE_UDP:
+ flow_verbs_translate_item_udp(dev_flow, items,
+ item_flags);
+ subpriority = MLX5_PRIORITY_MAP_L4;
+ dev_flow->verbs.hash_fields |=
+ mlx5_flow_hashfields_adjust
+ (dev_flow, tunnel, ETH_RSS_UDP,
+ (IBV_RX_HASH_SRC_PORT_UDP |
+ IBV_RX_HASH_DST_PORT_UDP));
+ item_flags |= tunnel ? MLX5_FLOW_LAYER_INNER_L4_UDP :
+ MLX5_FLOW_LAYER_OUTER_L4_UDP;
break;
case RTE_FLOW_ITEM_TYPE_VXLAN:
- flow_verbs_translate_item_vxlan(items, &item_flags,
- dev_flow);
+ flow_verbs_translate_item_vxlan(dev_flow, items,
+ item_flags);
+ subpriority = MLX5_PRIORITY_MAP_L2;
+ item_flags |= MLX5_FLOW_LAYER_VXLAN;
break;
case RTE_FLOW_ITEM_TYPE_VXLAN_GPE:
- flow_verbs_translate_item_vxlan_gpe(items, &item_flags,
- dev_flow);
+ flow_verbs_translate_item_vxlan_gpe(dev_flow, items,
+ item_flags);
+ subpriority = MLX5_PRIORITY_MAP_L2;
+ item_flags |= MLX5_FLOW_LAYER_VXLAN_GPE;
break;
case RTE_FLOW_ITEM_TYPE_GRE:
- flow_verbs_translate_item_gre(items, &item_flags,
- dev_flow);
+ flow_verbs_translate_item_gre(dev_flow, items,
+ item_flags);
+ subpriority = MLX5_PRIORITY_MAP_L2;
+ item_flags |= MLX5_FLOW_LAYER_GRE;
break;
case RTE_FLOW_ITEM_TYPE_MPLS:
- flow_verbs_translate_item_mpls(items, &item_flags,
- dev_flow);
+ flow_verbs_translate_item_mpls(dev_flow, items,
+ item_flags);
+ subpriority = MLX5_PRIORITY_MAP_L2;
+ item_flags |= MLX5_FLOW_LAYER_MPLS;
break;
default:
return rte_flow_error_set(error, ENOTSUP,
@@ -1633,9 +1581,9 @@ flow_verbs_translate(struct rte_eth_dev *dev,
"item not supported");
}
}
+ dev_flow->layers = item_flags;
dev_flow->verbs.attr->priority =
- mlx5_flow_adjust_priority(dev, priority,
- dev_flow->verbs.attr->priority);
+ mlx5_flow_adjust_priority(dev, priority, subpriority);
return 0;
}
--
2.11.0
next reply other threads:[~2018-11-02 21:08 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-02 21:08 Yongseok Koh [this message]
2018-11-02 21:08 ` [dpdk-dev] [PATCH 2/3] net/mlx5: fix Direct " Yongseok Koh
2018-11-04 8:22 ` Ori Kam
2018-11-05 5:37 ` Yongseok Koh
2018-11-05 6:08 ` Ori Kam
2018-11-05 6:43 ` Yongseok Koh
2018-11-02 21:08 ` [dpdk-dev] [PATCH 3/3] net/mlx5: remove flags setting from flow preparation Yongseok Koh
2018-11-04 8:29 ` Ori Kam
2018-11-05 5:39 ` Yongseok Koh
2018-11-04 8:17 ` [dpdk-dev] [PATCH 1/3] net/mlx5: fix Verbs flow tunnel Ori Kam
2018-11-05 7:20 ` [dpdk-dev] [PATCH v2 0/3] net/mlx5: fix tunnel flow Yongseok Koh
2018-11-05 7:20 ` [dpdk-dev] [PATCH v2 1/3] net/mlx5: fix Verbs flow tunnel Yongseok Koh
2018-11-05 7:20 ` [dpdk-dev] [PATCH v2 2/3] net/mlx5: fix Direct " Yongseok Koh
2018-11-05 7:31 ` Ori Kam
2018-11-05 7:20 ` [dpdk-dev] [PATCH v2 3/3] net/mlx5: remove flags setting from flow preparation Yongseok Koh
2018-11-05 7:32 ` Ori Kam
2018-11-05 8:09 ` [dpdk-dev] [PATCH v2 0/3] net/mlx5: fix tunnel flow Shahaf Shuler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181102210801.28370-1-yskoh@mellanox.com \
--to=yskoh@mellanox.com \
--cc=dev@dpdk.org \
--cc=orika@mellanox.com \
--cc=shahafs@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).