DPDK patches and discussions
 help / color / mirror / Atom feed
From: Qi Zhang <qi.z.zhang@intel.com>
To: ferruh.yigit@intel.com
Cc: thomas@monjalon.net, dev@dpdk.org, xueqin.lin@intel.com,
	Qi Zhang <qi.z.zhang@intel.com>
Subject: [dpdk-dev] [PATCH] net/pcap: enable data path on secondary
Date: Tue,  6 Nov 2018 05:08:23 +0800	[thread overview]
Message-ID: <20181105210823.38757-1-qi.z.zhang@intel.com> (raw)

Private vdev on secondary is never supported by the new shared
device mode but pdump still relies on a private pcap PMD on secondary.
The patch enables pcap PMD's data path on secondary so that pdump can
work as usual.

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
---
 drivers/net/pcap/rte_eth_pcap.c | 98 ++++++++++++++++++++++++++---------------
 1 file changed, 62 insertions(+), 36 deletions(-)

diff --git a/drivers/net/pcap/rte_eth_pcap.c b/drivers/net/pcap/rte_eth_pcap.c
index 7bbe72e25..cbb1fc88e 100644
--- a/drivers/net/pcap/rte_eth_pcap.c
+++ b/drivers/net/pcap/rte_eth_pcap.c
@@ -81,6 +81,7 @@ struct pmd_internals {
 	int if_index;
 	int single_iface;
 	int phy_mac;
+	char devargs[ETH_PCAP_ARG_MAXLEN];
 };
 
 struct pmd_devargs {
@@ -892,19 +893,19 @@ static int
 pmd_init_internals(struct rte_vdev_device *vdev,
 		const unsigned int nb_rx_queues,
 		const unsigned int nb_tx_queues,
-		struct pmd_internals **internals,
 		struct rte_eth_dev **eth_dev)
 {
 	struct rte_eth_dev_data *data;
 	unsigned int numa_node = vdev->device.numa_node;
+	struct pmd_internals *internals;
 
 	PMD_LOG(INFO, "Creating pcap-backed ethdev on numa socket %d",
 		numa_node);
 
 	/* reserve an ethdev entry */
-	*eth_dev = rte_eth_vdev_allocate(vdev, sizeof(**internals));
+	*eth_dev = rte_eth_vdev_allocate(vdev, sizeof(*internals));
 	if (!(*eth_dev))
-		return -1;
+		return -ENODEV;
 
 	/* now put it all together
 	 * - store queue data in internals,
@@ -912,21 +913,21 @@ pmd_init_internals(struct rte_vdev_device *vdev,
 	 * - point eth_dev_data to internals
 	 * - and point eth_dev structure to new eth_dev_data structure
 	 */
-	*internals = (*eth_dev)->data->dev_private;
+	internals = (*eth_dev)->data->dev_private;
 	/*
 	 * Interface MAC = 02:70:63:61:70:<iface_idx>
 	 * derived from: 'locally administered':'p':'c':'a':'p':'iface_idx'
 	 * where the middle 4 characters are converted to hex.
 	 */
-	(*internals)->eth_addr = (struct ether_addr) {
+	internals->eth_addr = (struct ether_addr) {
 		.addr_bytes = { 0x02, 0x70, 0x63, 0x61, 0x70, iface_idx++ }
 	};
-	(*internals)->phy_mac = 0;
+	internals->phy_mac = 0;
 	data = (*eth_dev)->data;
 	data->nb_rx_queues = (uint16_t)nb_rx_queues;
 	data->nb_tx_queues = (uint16_t)nb_tx_queues;
 	data->dev_link = pmd_link;
-	data->mac_addrs = &(*internals)->eth_addr;
+	data->mac_addrs = &internals->eth_addr;
 
 	/*
 	 * NOTE: we'll replace the data element, of originally allocated
@@ -934,6 +935,10 @@ pmd_init_internals(struct rte_vdev_device *vdev,
 	 */
 	(*eth_dev)->dev_ops = &ops;
 
+	/* store a copy of devargs for secondary process */
+	strlcpy(internals->devargs, rte_vdev_device_args(vdev),
+			ETH_PCAP_ARG_MAXLEN);
+
 	return 0;
 }
 
@@ -1022,10 +1027,11 @@ eth_pcap_update_mac(const char *if_name, struct rte_eth_dev *eth_dev,
 }
 
 static int
-eth_from_pcaps_common(struct rte_vdev_device *vdev,
-		struct pmd_devargs *rx_queues, const unsigned int nb_rx_queues,
-		struct pmd_devargs *tx_queues, const unsigned int nb_tx_queues,
-		struct pmd_internals **internals, struct rte_eth_dev **eth_dev)
+eth_from_pcaps_common(struct pmd_devargs *rx_queues,
+			const unsigned int nb_rx_queues,
+			struct pmd_devargs *tx_queues,
+			const unsigned int nb_tx_queues,
+			struct pmd_internals *internals)
 {
 	unsigned int i;
 
@@ -1035,12 +1041,8 @@ eth_from_pcaps_common(struct rte_vdev_device *vdev,
 	if (tx_queues == NULL && nb_tx_queues > 0)
 		return -1;
 
-	if (pmd_init_internals(vdev, nb_rx_queues, nb_tx_queues, internals,
-			eth_dev) < 0)
-		return -1;
-
 	for (i = 0; i < nb_rx_queues; i++) {
-		struct pcap_rx_queue *rx = &(*internals)->rx_queue[i];
+		struct pcap_rx_queue *rx = &internals->rx_queue[i];
 		struct devargs_queue *queue = &rx_queues->queue[i];
 
 		rx->pcap = queue->pcap;
@@ -1049,7 +1051,7 @@ eth_from_pcaps_common(struct rte_vdev_device *vdev,
 	}
 
 	for (i = 0; i < nb_tx_queues; i++) {
-		struct pcap_tx_queue *tx = &(*internals)->tx_queue[i];
+		struct pcap_tx_queue *tx = &internals->tx_queue[i];
 		struct devargs_queue *queue = &tx_queues->queue[i];
 
 		tx->dumper = queue->dumper;
@@ -1062,17 +1064,17 @@ eth_from_pcaps_common(struct rte_vdev_device *vdev,
 }
 
 static int
-eth_from_pcaps(struct rte_vdev_device *vdev,
+eth_from_pcaps(struct rte_vdev_device *vdev, struct rte_eth_dev *eth_dev,
 		struct pmd_devargs *rx_queues, const unsigned int nb_rx_queues,
 		struct pmd_devargs *tx_queues, const unsigned int nb_tx_queues,
 		int single_iface, unsigned int using_dumpers)
 {
 	struct pmd_internals *internals = NULL;
-	struct rte_eth_dev *eth_dev = NULL;
 	int ret;
 
-	ret = eth_from_pcaps_common(vdev, rx_queues, nb_rx_queues,
-		tx_queues, nb_tx_queues, &internals, &eth_dev);
+	internals = eth_dev->data->dev_private;
+	ret = eth_from_pcaps_common(rx_queues, nb_rx_queues,
+		tx_queues, nb_tx_queues, internals);
 
 	if (ret < 0)
 		return ret;
@@ -1099,7 +1101,6 @@ eth_from_pcaps(struct rte_vdev_device *vdev,
 	else
 		eth_dev->tx_pkt_burst = eth_pcap_tx;
 
-	rte_eth_dev_probing_finish(eth_dev);
 	return 0;
 }
 
@@ -1108,12 +1109,15 @@ pmd_pcap_probe(struct rte_vdev_device *dev)
 {
 	const char *name;
 	unsigned int is_rx_pcap = 0, is_tx_pcap = 0;
-	struct rte_kvargs *kvlist;
+	struct rte_kvargs *kvlist = NULL;
 	struct pmd_devargs pcaps = {0};
 	struct pmd_devargs dumpers = {0};
-	struct rte_eth_dev *eth_dev;
+	struct rte_eth_dev *eth_dev = NULL;
+	struct pmd_internals *internals = NULL;
+	unsigned int nb_rx_queue;
+	unsigned int nb_tx_queue;
 	int single_iface = 0;
-	int ret;
+	int ret = 0;
 
 	name = rte_vdev_device_name(dev);
 	PMD_LOG(INFO, "Initializing pmd_pcap for %s", name);
@@ -1122,23 +1126,41 @@ pmd_pcap_probe(struct rte_vdev_device *dev)
 	start_cycles = rte_get_timer_cycles();
 	hz = rte_get_timer_hz();
 
-	if (rte_eal_process_type() == RTE_PROC_SECONDARY) {
+	if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
+		kvlist = rte_kvargs_parse(rte_vdev_device_args(dev),
+				valid_arguments);
+		if (kvlist == NULL)
+			return -EINVAL;
+		if (rte_kvargs_count(kvlist, ETH_PCAP_IFACE_ARG) == 1) {
+			nb_rx_queue = 1;
+			nb_tx_queue = 1;
+		} else {
+			nb_rx_queue =
+				rte_kvargs_count(kvlist,
+					ETH_PCAP_RX_PCAP_ARG) ? 1 : 0;
+			nb_tx_queue =
+				rte_kvargs_count(kvlist,
+					ETH_PCAP_TX_PCAP_ARG) ? 1 : 0;
+		}
+		ret = pmd_init_internals(dev, nb_rx_queue,
+				nb_tx_queue, &eth_dev);
+		if (ret != 0)
+			goto free_kvlist;
+	} else {
 		eth_dev = rte_eth_dev_attach_secondary(name);
 		if (!eth_dev) {
 			PMD_LOG(ERR, "Failed to probe %s", name);
-			return -1;
+			ret = -ENODEV;
+			goto free_kvlist;
 		}
-		/* TODO: request info from primary to set up Rx and Tx */
 		eth_dev->dev_ops = &ops;
 		eth_dev->device = &dev->device;
-		rte_eth_dev_probing_finish(eth_dev);
-		return 0;
+		internals = eth_dev->data->dev_private;
+		kvlist = rte_kvargs_parse(internals->devargs, valid_arguments);
+		if (kvlist == NULL)
+			return -EINVAL;
 	}
 
-	kvlist = rte_kvargs_parse(rte_vdev_device_args(dev), valid_arguments);
-	if (kvlist == NULL)
-		return -1;
-
 	/*
 	 * If iface argument is passed we open the NICs and use them for
 	 * reading / writing
@@ -1202,8 +1224,12 @@ pmd_pcap_probe(struct rte_vdev_device *dev)
 		goto free_kvlist;
 
 create_eth:
-	ret = eth_from_pcaps(dev, &pcaps, pcaps.num_of_queue, &dumpers,
-		dumpers.num_of_queue, single_iface, is_tx_pcap);
+	ret = eth_from_pcaps(dev, eth_dev, &pcaps, pcaps.num_of_queue,
+			&dumpers, dumpers.num_of_queue,
+			single_iface, is_tx_pcap);
+	if (ret != 0)
+		goto free_kvlist;
+	rte_eth_dev_probing_finish(eth_dev);
 
 free_kvlist:
 	rte_kvargs_free(kvlist);
-- 
2.13.6

             reply	other threads:[~2018-11-05 21:07 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-05 21:08 Qi Zhang [this message]
2018-11-09 21:13 ` Ferruh Yigit
2018-11-09 21:24   ` Zhang, Qi Z
2018-11-12 16:51 ` [dpdk-dev] [PATCH v2] " Qi Zhang
2018-11-13 16:56   ` Ferruh Yigit
2018-11-13 17:11     ` [dpdk-dev] [PATCH] net/pcap: fix pcap handlers for secondary Ferruh Yigit
2018-11-13 17:14     ` [dpdk-dev] [PATCH v2] net/pcap: enable data path on secondary Thomas Monjalon
2018-11-13 18:27       ` Zhang, Qi Z
2018-11-13 18:43         ` Ferruh Yigit
2018-11-13 19:18           ` Zhang, Qi Z
2018-11-14 19:56 ` [dpdk-dev] [PATCH v3 0/2] fix pcap handlers for secondary Qi Zhang
2018-11-14 19:56   ` [dpdk-dev] [PATCH v3 1/2] net/pcap: move pcap handler to process private Qi Zhang
2018-11-14 23:05     ` Ferruh Yigit
2018-11-15  0:13       ` Zhang, Qi Z
2018-11-14 19:56   ` [dpdk-dev] [PATCH v3 2/2] net/pcap: enable data path for secondary Qi Zhang
2018-11-14 23:08     ` Ferruh Yigit
2018-11-15  0:06       ` Zhang, Qi Z
2018-11-15  1:37 ` [dpdk-dev] [PATCH v4 0/2] fix pcap handlers " Qi Zhang
2018-11-15  1:37   ` [dpdk-dev] [PATCH v4 1/2] net/pcap: move pcap handler to process private Qi Zhang
2018-11-16 15:56     ` Ferruh Yigit
2018-11-15  1:37   ` [dpdk-dev] [PATCH v4 2/2] net/pcap: enable data path for secondary Qi Zhang
2018-11-16 14:54   ` [dpdk-dev] [PATCH v4 0/2] fix pcap handlers " Ferruh Yigit
2018-11-16 16:12     ` Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181105210823.38757-1-qi.z.zhang@intel.com \
    --to=qi.z.zhang@intel.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=thomas@monjalon.net \
    --cc=xueqin.lin@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).