From: Qi Zhang <qi.z.zhang@intel.com>
To: ferruh.yigit@intel.com, bruce.richardson@intel.com,
keith.wiles@intel.com, konstantin.ananyev@intel.com
Cc: dev@dpdk.org, wenzhuo.lu@intel.com, bernard.iremonger@intel.com,
Qi Zhang <qi.z.zhang@intel.com>
Subject: [dpdk-dev] [PATCH v3 1/3] app/testpmd: code refactory for macswap
Date: Sun, 16 Dec 2018 08:58:33 +0800 [thread overview]
Message-ID: <20181216005835.23679-2-qi.z.zhang@intel.com> (raw)
In-Reply-To: <20181216005835.23679-1-qi.z.zhang@intel.com>
Move macswap workload to dedicate function, so we can further enable
platform specific optimized version.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
---
app/test-pmd/macswap.c | 32 ++----------------------------
app/test-pmd/macswap.h | 40 +++++++++++++++++++++++++++++++++++++
app/test-pmd/macswap_common.h | 46 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 88 insertions(+), 30 deletions(-)
create mode 100644 app/test-pmd/macswap.h
create mode 100644 app/test-pmd/macswap_common.h
diff --git a/app/test-pmd/macswap.c b/app/test-pmd/macswap.c
index a8384d5b8..849194fe2 100644
--- a/app/test-pmd/macswap.c
+++ b/app/test-pmd/macswap.c
@@ -66,6 +66,7 @@
#include <rte_flow.h>
#include "testpmd.h"
+#include "macswap.h"
/*
* MAC swap forwarding mode: Swap the source and the destination Ethernet
@@ -76,15 +77,9 @@ pkt_burst_mac_swap(struct fwd_stream *fs)
{
struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
struct rte_port *txp;
- struct rte_mbuf *mb;
- struct ether_hdr *eth_hdr;
- struct ether_addr addr;
uint16_t nb_rx;
uint16_t nb_tx;
- uint16_t i;
uint32_t retry;
- uint64_t ol_flags = 0;
- uint64_t tx_offloads;
#ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES
uint64_t start_tsc;
uint64_t end_tsc;
@@ -108,32 +103,9 @@ pkt_burst_mac_swap(struct fwd_stream *fs)
#endif
fs->rx_packets += nb_rx;
txp = &ports[fs->tx_port];
- tx_offloads = txp->dev_conf.txmode.offloads;
- if (tx_offloads & DEV_TX_OFFLOAD_VLAN_INSERT)
- ol_flags = PKT_TX_VLAN_PKT;
- if (tx_offloads & DEV_TX_OFFLOAD_QINQ_INSERT)
- ol_flags |= PKT_TX_QINQ_PKT;
- if (tx_offloads & DEV_TX_OFFLOAD_MACSEC_INSERT)
- ol_flags |= PKT_TX_MACSEC;
- for (i = 0; i < nb_rx; i++) {
- if (likely(i < nb_rx - 1))
- rte_prefetch0(rte_pktmbuf_mtod(pkts_burst[i + 1],
- void *));
- mb = pkts_burst[i];
- eth_hdr = rte_pktmbuf_mtod(mb, struct ether_hdr *);
- /* Swap dest and src mac addresses. */
- ether_addr_copy(ð_hdr->d_addr, &addr);
- ether_addr_copy(ð_hdr->s_addr, ð_hdr->d_addr);
- ether_addr_copy(&addr, ð_hdr->s_addr);
+ do_macswap(pkts_burst, nb_rx, txp);
- mb->ol_flags &= IND_ATTACHED_MBUF | EXT_ATTACHED_MBUF;
- mb->ol_flags |= ol_flags;
- mb->l2_len = sizeof(struct ether_hdr);
- mb->l3_len = sizeof(struct ipv4_hdr);
- mb->vlan_tci = txp->tx_vlan_id;
- mb->vlan_tci_outer = txp->tx_vlan_id_outer;
- }
nb_tx = rte_eth_tx_burst(fs->tx_port, fs->tx_queue, pkts_burst, nb_rx);
/*
* Retry if necessary
diff --git a/app/test-pmd/macswap.h b/app/test-pmd/macswap.h
new file mode 100644
index 000000000..bfa9b0eda
--- /dev/null
+++ b/app/test-pmd/macswap.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018 Intel Corporation
+ */
+
+#ifndef _MACSWAP_H_
+#define _MACSWAP_H_
+
+#include "macswap_common.h"
+
+static inline void
+do_macswap(struct rte_mbuf *pkts[], uint16_t nb,
+ struct rte_port *txp)
+{
+ struct ether_hdr *eth_hdr;
+ struct rte_mbuf *mb;
+ struct ether_addr addr;
+ uint64_t ol_flags;
+ int i;
+
+ ol_flags = ol_flags_init(txp->dev_conf.txmode.offloads);
+ vlan_qinq_set(pkts, nb, ol_flags,
+ txp->tx_vlan_id, txp->tx_vlan_id_outer);
+
+ for (i = 0; i < nb; i++) {
+ if (likely(i < nb - 1))
+ rte_prefetch0(rte_pktmbuf_mtod(pkts[i+1], void *));
+ mb = pkts[i];
+
+ eth_hdr = rte_pktmbuf_mtod(mb, struct ether_hdr *);
+
+ /* Swap dest and src mac addresses. */
+ ether_addr_copy(ð_hdr->d_addr, &addr);
+ ether_addr_copy(ð_hdr->s_addr, ð_hdr->d_addr);
+ ether_addr_copy(&addr, ð_hdr->s_addr);
+
+ mbuf_field_set(mb, ol_flags);
+ }
+}
+
+#endif /* _MACSWAP_H_ */
diff --git a/app/test-pmd/macswap_common.h b/app/test-pmd/macswap_common.h
new file mode 100644
index 000000000..19754cdd1
--- /dev/null
+++ b/app/test-pmd/macswap_common.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018 Intel Corporation
+ */
+
+#ifndef _MACSWAP_COMMON_H_
+#define _MACSWAP_COMMON_H_
+
+static inline uint64_t
+ol_flags_init(uint64_t tx_offload)
+{
+ uint64_t ol_flags = 0;
+
+ ol_flags |= (tx_offload & DEV_TX_OFFLOAD_VLAN_INSERT) ?
+ PKT_TX_VLAN : 0;
+ ol_flags |= (tx_offload & DEV_TX_OFFLOAD_QINQ_INSERT) ?
+ PKT_TX_QINQ : 0;
+ ol_flags |= (tx_offload & DEV_TX_OFFLOAD_MACSEC_INSERT) ?
+ PKT_TX_MACSEC : 0;
+
+ return ol_flags;
+}
+
+static inline void
+vlan_qinq_set(struct rte_mbuf *pkts[], uint16_t nb,
+ uint64_t ol_flags, uint16_t vlan, uint16_t outer_vlan)
+{
+ int i;
+
+ if (ol_flags & PKT_TX_VLAN)
+ for (i = 0; i < nb; i++)
+ pkts[i]->vlan_tci = vlan;
+ if (ol_flags & PKT_TX_QINQ)
+ for (i = 0; i < nb; i++)
+ pkts[i]->vlan_tci_outer = outer_vlan;
+}
+
+static inline void
+mbuf_field_set(struct rte_mbuf *mb, uint64_t ol_flags)
+{
+ mb->ol_flags &= IND_ATTACHED_MBUF | EXT_ATTACHED_MBUF;
+ mb->ol_flags |= ol_flags;
+ mb->l2_len = sizeof(struct ether_hdr);
+ mb->l3_len = sizeof(struct ipv4_hdr);
+}
+
+#endif /* _MACSWAP_COMMON_H_ */
--
2.13.6
next prev parent reply other threads:[~2018-12-16 0:57 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-22 17:26 [dpdk-dev] [PATCH 0/3] improve MAC swap performance Qi Zhang
2018-11-22 17:26 ` [dpdk-dev] [PATCH 1/3] app/testpmd: code refactory for macswap Qi Zhang
2018-11-22 17:26 ` [dpdk-dev] [PATCH 2/3] app/testpmd: improve MAC swap performance for x86 Qi Zhang
2018-11-22 17:26 ` [dpdk-dev] [PATCH 3/3] app/testpmd: further " Qi Zhang
2018-11-22 17:38 ` [dpdk-dev] [PATCH v2 0/3] improve MAC swap performance Qi Zhang
2018-11-22 17:38 ` [dpdk-dev] [PATCH v2 1/3] app/testpmd: code refactory for macswap Qi Zhang
2018-12-10 17:44 ` Ferruh Yigit
2018-12-11 4:02 ` Zhang, Qi Z
2018-11-22 17:38 ` [dpdk-dev] [PATCH v2 2/3] app/testpmd: improve MAC swap performance for x86 Qi Zhang
2018-12-10 17:44 ` Ferruh Yigit
2018-11-22 17:38 ` [dpdk-dev] [PATCH v2 3/3] app/testpmd: further " Qi Zhang
2018-12-11 5:55 ` [dpdk-dev] [PATCH v2 0/3] improve MAC swap performance Qi Zhang
2018-12-11 5:55 ` [dpdk-dev] [PATCH v2 1/3] app/testpmd: code refactory for macswap Qi Zhang
2018-12-11 15:48 ` Ferruh Yigit
2018-12-14 11:14 ` Iremonger, Bernard
2018-12-14 11:21 ` Zhang, Qi Z
2018-12-11 5:55 ` [dpdk-dev] [PATCH v2 2/3] app/testpmd: improve MAC swap performance for x86 Qi Zhang
2018-12-13 19:50 ` [dpdk-dev] [EXT] " Jerin Jacob Kollanukkaran
2018-12-14 11:21 ` [dpdk-dev] " Iremonger, Bernard
2018-12-14 11:36 ` Zhang, Qi Z
2018-12-11 5:55 ` [dpdk-dev] [PATCH v2 3/3] app/testpmd: further " Qi Zhang
2018-12-16 0:58 ` [dpdk-dev] [PATCH v3 0/3] improve MAC swap performance Qi Zhang
2018-12-16 0:58 ` Qi Zhang [this message]
2018-12-18 11:06 ` [dpdk-dev] [PATCH v3 1/3] app/testpmd: code refactory for macswap Iremonger, Bernard
2018-12-16 0:58 ` [dpdk-dev] [PATCH v3 2/3] app/testpmd: improve MAC swap performance for x86 Qi Zhang
2018-12-18 11:07 ` Iremonger, Bernard
2018-12-16 0:58 ` [dpdk-dev] [PATCH v3 3/3] app/testpmd: further " Qi Zhang
2018-12-18 11:09 ` Iremonger, Bernard
2018-12-18 0:15 ` [dpdk-dev] [PATCH v3 0/3] improve MAC swap performance Ferruh Yigit
2018-12-18 16:29 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181216005835.23679-2-qi.z.zhang@intel.com \
--to=qi.z.zhang@intel.com \
--cc=bernard.iremonger@intel.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=keith.wiles@intel.com \
--cc=konstantin.ananyev@intel.com \
--cc=wenzhuo.lu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).