DPDK patches and discussions
 help / color / mirror / Atom feed
From: Akhil Goyal <akhil.goyal@nxp.com>
To: Fan Zhang <roy.fan.zhang@intel.com>, "dev@dpdk.org" <dev@dpdk.org>
Cc: "konstantin.ananyev@intel.com" <konstantin.ananyev@intel.com>
Subject: Re: [dpdk-dev] [PATCH v5 1/5] ipsec: support AES-CTR
Date: Fri, 22 Mar 2019 11:53:43 +0000	[thread overview]
Message-ID: <2f17fba4-38ff-97bb-f77c-e8cdbfba09c3@nxp.com> (raw)
Message-ID: <20190322115343.2bDMgnFEdPBjgxOJsdaTRvUAVrK9Q-02SI40xhUo46A@z> (raw)
In-Reply-To: <20190320153838.60419-2-roy.fan.zhang@intel.com>

Hi Fan,

On 3/20/2019 9:08 PM, Fan Zhang wrote:
> This patch adds AES-CTR cipher algorithm support to ipsec
> library.
>
> Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
> Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
> ---
>   lib/librte_ipsec/crypto.h |  17 ++++++
>   lib/librte_ipsec/sa.c     | 133 ++++++++++++++++++++++++++++++++++++++--------
>   lib/librte_ipsec/sa.h     |  18 +++++++
>   3 files changed, 147 insertions(+), 21 deletions(-)
>
> diff --git a/lib/librte_ipsec/crypto.h b/lib/librte_ipsec/crypto.h
> index b5f264831..4f551e39c 100644
> --- a/lib/librte_ipsec/crypto.h
> +++ b/lib/librte_ipsec/crypto.h
> @@ -11,6 +11,16 @@
>    * by ipsec library.
>    */
>   
> +/*
> + * AES-CTR counter block format.
> + */
> +
> +struct aesctr_cnt_blk {
> +	uint32_t nonce;
> +	uint64_t iv;
> +	uint32_t cnt;
> +} __attribute__((packed));
> +
In the v3 I gave a comment on this structure. It is not fixed.
I believe cnt should be before iv.

>    /*
>     * AES-GCM devices have some specific requirements for IV and AAD formats.
>     * Ideally that to be done by the driver itself.
> @@ -41,6 +51,13 @@ struct gcm_esph_iv {
>   	uint64_t iv;
>   } __attribute__((packed));
>   
> +static inline void
> +aes_ctr_cnt_blk_fill(struct aesctr_cnt_blk *ctr, uint64_t iv, uint32_t nonce)
> +{
> +	ctr->nonce = nonce;
> +	ctr->iv = iv;
> +	ctr->cnt = rte_cpu_to_be_32(1);
> +}
>   
>   static inline void
>   aead_gcm_iv_fill(struct aead_gcm_iv *gcm, uint64_t iv, uint32_t salt)
> diff --git a/lib/librte_ipsec/sa.c b/lib/librte_ipsec/sa.c
> index 5f55c2a4e..e34dd320a 100644
> --- a/lib/librte_ipsec/sa.c
> +++ b/lib/librte_ipsec/sa.c
> @@ -219,18 +219,28 @@ esp_inb_tun_init(struct rte_ipsec_sa *sa, const struct rte_ipsec_sa_prm *prm)
>   static void
>   esp_outb_init(struct rte_ipsec_sa *sa, uint32_t hlen)
>   {
> +	uint8_t algo_type;
> +
>   	sa->sqn.outb.raw = 1;
>   
>   	/* these params may differ with new algorithms support */
>   	sa->ctp.auth.offset = hlen;
>   	sa->ctp.auth.length = sizeof(struct esp_hdr) + sa->iv_len + sa->sqh_len;
> -	if (sa->aad_len != 0) {
> +
> +	algo_type = sa->algo_type;
> +
> +	switch (algo_type) {
> +	case ALGO_TYPE_AES_GCM:
> +	case ALGO_TYPE_AES_CTR:
> +	case ALGO_TYPE_NULL:
>   		sa->ctp.cipher.offset = hlen + sizeof(struct esp_hdr) +
>   			sa->iv_len;
>   		sa->ctp.cipher.length = 0;
> -	} else {
> +		break;
> +	case ALGO_TYPE_AES_CBC:
>   		sa->ctp.cipher.offset = sa->hdr_len + sizeof(struct esp_hdr);
>   		sa->ctp.cipher.length = sa->iv_len;
> +		break;
>   	}
>   }
>   
> @@ -259,26 +269,47 @@ esp_sa_init(struct rte_ipsec_sa *sa, const struct rte_ipsec_sa_prm *prm,
>   				RTE_IPSEC_SATP_MODE_MASK;
>   
>   	if (cxf->aead != NULL) {
> -		/* RFC 4106 */
> -		if (cxf->aead->algo != RTE_CRYPTO_AEAD_AES_GCM)
> +		switch (cxf->aead->algo) {
> +		case RTE_CRYPTO_AEAD_AES_GCM:
> +			/* RFC 4106 */
> +			sa->aad_len = sizeof(struct aead_gcm_aad);
> +			sa->icv_len = cxf->aead->digest_length;
> +			sa->iv_ofs = cxf->aead->iv.offset;
> +			sa->iv_len = sizeof(uint64_t);
> +			sa->pad_align = IPSEC_PAD_AES_GCM;
> +			sa->algo_type = ALGO_TYPE_AES_GCM;
> +			break;
> +		default:
>   			return -EINVAL;
> -		sa->aad_len = sizeof(struct aead_gcm_aad);
> -		sa->icv_len = cxf->aead->digest_length;
> -		sa->iv_ofs = cxf->aead->iv.offset;
> -		sa->iv_len = sizeof(uint64_t);
> -		sa->pad_align = IPSEC_PAD_AES_GCM;
> +		}
>   	} else {
>   		sa->icv_len = cxf->auth->digest_length;
>   		sa->iv_ofs = cxf->cipher->iv.offset;
>   		sa->sqh_len = IS_ESN(sa) ? sizeof(uint32_t) : 0;
> -		if (cxf->cipher->algo == RTE_CRYPTO_CIPHER_NULL) {
> +
> +		switch (cxf->cipher->algo) {
> +		case RTE_CRYPTO_CIPHER_NULL:
>   			sa->pad_align = IPSEC_PAD_NULL;
>   			sa->iv_len = 0;
> -		} else if (cxf->cipher->algo == RTE_CRYPTO_CIPHER_AES_CBC) {
> +			sa->algo_type = ALGO_TYPE_NULL;
> +			break;
> +
> +		case RTE_CRYPTO_CIPHER_AES_CBC:
>   			sa->pad_align = IPSEC_PAD_AES_CBC;
>   			sa->iv_len = IPSEC_MAX_IV_SIZE;
> -		} else
> +			sa->algo_type = ALGO_TYPE_AES_CBC;
> +			break;
> +
> +		case RTE_CRYPTO_CIPHER_AES_CTR:
> +			/* RFC 3686 */
> +			sa->pad_align = IPSEC_PAD_AES_CTR;
> +			sa->iv_len = IPSEC_AES_CTR_IV_SIZE;
> +			sa->algo_type = ALGO_TYPE_AES_CTR;
> +			break;
> +
> +		default:
>   			return -EINVAL;
> +		}
>   	}
>   
>   	sa->udata = prm->userdata;
> @@ -438,12 +469,15 @@ esp_outb_cop_prepare(struct rte_crypto_op *cop,
>   {
>   	struct rte_crypto_sym_op *sop;
>   	struct aead_gcm_iv *gcm;
> +	struct aesctr_cnt_blk *ctr;
> +	uint8_t algo_type = sa->algo_type;
>   
>   	/* fill sym op fields */
>   	sop = cop->sym;
>   
> -	/* AEAD (AES_GCM) case */
> -	if (sa->aad_len != 0) {
> +	switch (algo_type) {
> +	case ALGO_TYPE_AES_GCM:
> +		/* AEAD (AES_GCM) case */
>   		sop->aead.data.offset = sa->ctp.cipher.offset + hlen;
>   		sop->aead.data.length = sa->ctp.cipher.length + plen;
>   		sop->aead.digest.data = icv->va;
> @@ -455,14 +489,40 @@ esp_outb_cop_prepare(struct rte_crypto_op *cop,
>   		gcm = rte_crypto_op_ctod_offset(cop, struct aead_gcm_iv *,
>   			sa->iv_ofs);
>   		aead_gcm_iv_fill(gcm, ivp[0], sa->salt);
> -	/* CRYPT+AUTH case */
> -	} else {
> +		break;
> +	case ALGO_TYPE_AES_CBC:
> +		/* Cipher-Auth (AES-CBC *) case */
> +		sop->cipher.data.offset = sa->ctp.cipher.offset + hlen;
> +		sop->cipher.data.length = sa->ctp.cipher.length + plen;
> +		sop->auth.data.offset = sa->ctp.auth.offset + hlen;
> +		sop->auth.data.length = sa->ctp.auth.length + plen;
> +		sop->auth.digest.data = icv->va;
> +		sop->auth.digest.phys_addr = icv->pa;
> +		break;
> +	case ALGO_TYPE_AES_CTR:
> +		/* Cipher-Auth (AES-CTR *) case */
> +		sop->cipher.data.offset = sa->ctp.cipher.offset + hlen;
> +		sop->cipher.data.length = sa->ctp.cipher.length + plen;
> +		sop->auth.data.offset = sa->ctp.auth.offset + hlen;
> +		sop->auth.data.length = sa->ctp.auth.length + plen;
> +		sop->auth.digest.data = icv->va;
> +		sop->auth.digest.phys_addr = icv->pa;
> +
> +		ctr = rte_crypto_op_ctod_offset(cop, struct aesctr_cnt_blk *,
> +			sa->iv_ofs);
> +		aes_ctr_cnt_blk_fill(ctr, ivp[0], sa->salt);
> +		break;
> +	case ALGO_TYPE_NULL:
> +		/* NULL case */
>   		sop->cipher.data.offset = sa->ctp.cipher.offset + hlen;
>   		sop->cipher.data.length = sa->ctp.cipher.length + plen;
>   		sop->auth.data.offset = sa->ctp.auth.offset + hlen;
>   		sop->auth.data.length = sa->ctp.auth.length + plen;
>   		sop->auth.digest.data = icv->va;
>   		sop->auth.digest.phys_addr = icv->pa;
> +		break;
> +	default:
> +		break;
>   	}
>   }
>   
> @@ -561,6 +621,7 @@ outb_pkt_xprepare(const struct rte_ipsec_sa *sa, rte_be64_t sqc,
>   {
>   	uint32_t *psqh;
>   	struct aead_gcm_aad *aad;
> +	uint8_t algo_type = sa->algo_type;
>   
>   	/* insert SQN.hi between ESP trailer and ICV */
>   	if (sa->sqh_len != 0) {
> @@ -572,7 +633,7 @@ outb_pkt_xprepare(const struct rte_ipsec_sa *sa, rte_be64_t sqc,
>   	 * fill IV and AAD fields, if any (aad fields are placed after icv),
>   	 * right now we support only one AEAD algorithm: AES-GCM .
>   	 */
> -	if (sa->aad_len != 0) {
> +	if (algo_type == ALGO_TYPE_AES_GCM) {
>   		aad = (struct aead_gcm_aad *)(icv->va + sa->icv_len);
>   		aead_gcm_aad_fill(aad, sa->spi, sqc, IS_ESN(sa));
>   	}
> @@ -783,8 +844,10 @@ esp_inb_tun_cop_prepare(struct rte_crypto_op *cop,
>   {
>   	struct rte_crypto_sym_op *sop;
>   	struct aead_gcm_iv *gcm;
> +	struct aesctr_cnt_blk *ctr;
>   	uint64_t *ivc, *ivp;
>   	uint32_t clen;
> +	uint8_t algo_type = sa->algo_type;
>   
>   	clen = plen - sa->ctp.cipher.length;
>   	if ((int32_t)clen < 0 || (clen & (sa->pad_align - 1)) != 0)
> @@ -793,8 +856,8 @@ esp_inb_tun_cop_prepare(struct rte_crypto_op *cop,
>   	/* fill sym op fields */
>   	sop = cop->sym;
>   
> -	/* AEAD (AES_GCM) case */
> -	if (sa->aad_len != 0) {
> +	switch (algo_type) {
> +	case ALGO_TYPE_AES_GCM:
>   		sop->aead.data.offset = pofs + sa->ctp.cipher.offset;
>   		sop->aead.data.length = clen;
>   		sop->aead.digest.data = icv->va;
> @@ -808,8 +871,8 @@ esp_inb_tun_cop_prepare(struct rte_crypto_op *cop,
>   		ivp = rte_pktmbuf_mtod_offset(mb, uint64_t *,
>   			pofs + sizeof(struct esp_hdr));
>   		aead_gcm_iv_fill(gcm, ivp[0], sa->salt);
> -	/* CRYPT+AUTH case */
> -	} else {
> +		break;
> +	case ALGO_TYPE_AES_CBC:
>   		sop->cipher.data.offset = pofs + sa->ctp.cipher.offset;
>   		sop->cipher.data.length = clen;
>   		sop->auth.data.offset = pofs + sa->ctp.auth.offset;
> @@ -822,7 +885,35 @@ esp_inb_tun_cop_prepare(struct rte_crypto_op *cop,
>   		ivp = rte_pktmbuf_mtod_offset(mb, uint64_t *,
>   			pofs + sizeof(struct esp_hdr));
>   		copy_iv(ivc, ivp, sa->iv_len);
> +		break;
> +	case ALGO_TYPE_AES_CTR:
> +		sop->cipher.data.offset = pofs + sa->ctp.cipher.offset;
> +		sop->cipher.data.length = clen;
> +		sop->auth.data.offset = pofs + sa->ctp.auth.offset;
> +		sop->auth.data.length = plen - sa->ctp.auth.length;
> +		sop->auth.digest.data = icv->va;
> +		sop->auth.digest.phys_addr = icv->pa;
> +
> +		/* copy iv from the input packet to the cop */
> +		ctr = rte_crypto_op_ctod_offset(cop, struct aesctr_cnt_blk *,
> +			sa->iv_ofs);
> +		ivp = rte_pktmbuf_mtod_offset(mb, uint64_t *,
> +			pofs + sizeof(struct esp_hdr));
> +		aes_ctr_cnt_blk_fill(ctr, ivp[0], sa->salt);
> +		break;
> +	case ALGO_TYPE_NULL:
> +		sop->cipher.data.offset = pofs + sa->ctp.cipher.offset;
> +		sop->cipher.data.length = clen;
> +		sop->auth.data.offset = pofs + sa->ctp.auth.offset;
> +		sop->auth.data.length = plen - sa->ctp.auth.length;
> +		sop->auth.digest.data = icv->va;
> +		sop->auth.digest.phys_addr = icv->pa;
> +		break;
> +
> +	default:
> +		return -EINVAL;
>   	}
> +
>   	return 0;
>   }
>   
> diff --git a/lib/librte_ipsec/sa.h b/lib/librte_ipsec/sa.h
> index 392e8fd7b..12c061ee6 100644
> --- a/lib/librte_ipsec/sa.h
> +++ b/lib/librte_ipsec/sa.h
> @@ -15,10 +15,17 @@
>   enum {
>   	IPSEC_PAD_DEFAULT = 4,
>   	IPSEC_PAD_AES_CBC = IPSEC_MAX_IV_SIZE,
> +	IPSEC_PAD_AES_CTR = IPSEC_PAD_DEFAULT,
>   	IPSEC_PAD_AES_GCM = IPSEC_PAD_DEFAULT,
>   	IPSEC_PAD_NULL = IPSEC_PAD_DEFAULT,
>   };
>   
> +/* iv sizes for different algorithms */
> +enum {
> +	IPSEC_IV_SIZE_DEFAULT = IPSEC_MAX_IV_SIZE,
> +	IPSEC_AES_CTR_IV_SIZE = sizeof(uint64_t),
> +};
> +
>   /* these definitions probably has to be in rte_crypto_sym.h */
>   union sym_op_ofslen {
>   	uint64_t raw;
> @@ -47,7 +54,17 @@ struct replay_sqn {
>   	__extension__ uint64_t window[0];
>   };
>   
> +/*IPSEC SA supported algorithms */
> +enum sa_algo_type	{
> +	ALGO_TYPE_NULL = 0,
> +	ALGO_TYPE_AES_CBC,
> +	ALGO_TYPE_AES_CTR,
> +	ALGO_TYPE_AES_GCM,
> +	ALGO_TYPE_MAX
> +};
> +
>   struct rte_ipsec_sa {
> +
>   	uint64_t type;     /* type of given SA */
>   	uint64_t udata;    /* user defined */
>   	uint32_t size;     /* size of given sa object */
> @@ -65,6 +82,7 @@ struct rte_ipsec_sa {
>   		union sym_op_ofslen auth;
>   	} ctp;
>   	uint32_t salt;
> +	uint8_t algo_type;
>   	uint8_t proto;    /* next proto */
>   	uint8_t aad_len;
>   	uint8_t hdr_len;


  parent reply	other threads:[~2019-03-22 11:53 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-18 16:32 [dpdk-dev] [PATCH 0/4] ipsec: add AES-CTR and 3DES-CBC support Fan Zhang
2019-02-18 16:32 ` [dpdk-dev] [PATCH 1/4] ipsec: add AES-CTR algorithm support Fan Zhang
2019-02-18 16:32 ` [dpdk-dev] [PATCH 2/4] ipsec-secgw: add test scripts for aes ctr Fan Zhang
2019-02-18 16:32 ` [dpdk-dev] [PATCH 3/4] ipsec: add 3DES-CBC algorithm support Fan Zhang
2019-02-18 16:32 ` [dpdk-dev] [PATCH 4/4] ipsec-secgw: add 3des test files Fan Zhang
2019-02-19 15:32 ` [dpdk-dev] [PATCH v2 0/4] ipsec: add AES-CTR and 3DES-CBC support Fan Zhang
2019-02-19 15:32   ` [dpdk-dev] [PATCH v2 1/4] ipsec: add AES-CTR algorithm support Fan Zhang
2019-02-22 12:43     ` Ananyev, Konstantin
2019-03-19 14:32     ` Akhil Goyal
2019-03-19 14:32       ` Akhil Goyal
2019-02-19 15:32   ` [dpdk-dev] [PATCH v2 2/4] ipsec-secgw: add test scripts for aes ctr Fan Zhang
2019-02-22 12:39     ` Ananyev, Konstantin
2019-02-19 15:32   ` [dpdk-dev] [PATCH v2 3/4] ipsec: add 3DES-CBC algorithm support Fan Zhang
2019-02-22 12:38     ` Ananyev, Konstantin
2019-03-19 14:46     ` Akhil Goyal
2019-03-19 14:46       ` Akhil Goyal
2019-02-19 15:32   ` [dpdk-dev] [PATCH v2 4/4] ipsec-secgw: add 3des test files Fan Zhang
2019-02-22 12:40     ` Ananyev, Konstantin
2019-02-25 12:07   ` [dpdk-dev] [PATCH v3 0/4] ipsec: add AES-CTR and 3DES-CBC support Fan Zhang
2019-02-25 12:07     ` [dpdk-dev] [PATCH v3 1/4] ipsec: add AES-CTR algorithm support Fan Zhang
2019-02-25 12:07     ` [dpdk-dev] [PATCH v3 2/4] ipsec-secgw: add test scripts for aes ctr Fan Zhang
2019-02-25 12:07     ` [dpdk-dev] [PATCH v3 3/4] ipsec: add 3DES-CBC algorithm support Fan Zhang
2019-02-25 12:07     ` [dpdk-dev] [PATCH v3 4/4] ipsec-secgw: add 3des test files Fan Zhang
2019-03-04 16:38     ` [dpdk-dev] [PATCH v3 0/4] ipsec: add AES-CTR and 3DES-CBC support Ananyev, Konstantin
2019-03-20 13:51     ` [dpdk-dev] [PATCH v4 0/4] ipsec: support AES-CTR and 3DES-CBC Fan Zhang
2019-03-20 13:51       ` Fan Zhang
2019-03-20 13:51       ` [dpdk-dev] [PATCH v4 1/4] ipsec: support AES-CTR Fan Zhang
2019-03-20 13:51         ` Fan Zhang
2019-03-20 13:51       ` [dpdk-dev] [PATCH v4 2/4] ipsec-secgw: add test scripts for aes ctr Fan Zhang
2019-03-20 13:51         ` Fan Zhang
2019-03-20 13:51       ` [dpdk-dev] [PATCH v4 3/4] ipsec: support 3DES-CBC Fan Zhang
2019-03-20 13:51         ` Fan Zhang
2019-03-20 13:51       ` [dpdk-dev] [PATCH v4 4/4] ipsec-secgw: add 3des test files Fan Zhang
2019-03-20 13:51         ` Fan Zhang
2019-03-20 15:38       ` [dpdk-dev] [PATCH v5 0/5] ipsec: support AES-CTR and 3DES-CBC Fan Zhang
2019-03-20 15:38         ` Fan Zhang
2019-03-20 15:38         ` [dpdk-dev] [PATCH v5 1/5] ipsec: support AES-CTR Fan Zhang
2019-03-20 15:38           ` Fan Zhang
2019-03-22 11:53           ` Akhil Goyal [this message]
2019-03-22 11:53             ` Akhil Goyal
2019-03-22 12:46             ` Ananyev, Konstantin
2019-03-22 12:46               ` Ananyev, Konstantin
2019-03-22 13:01               ` Akhil Goyal
2019-03-22 13:01                 ` Akhil Goyal
2019-03-20 15:38         ` [dpdk-dev] [PATCH v5 2/5] ipsec-secgw: add test scripts for aes ctr Fan Zhang
2019-03-20 15:38           ` Fan Zhang
2019-03-20 15:38         ` [dpdk-dev] [PATCH v5 3/5] ipsec: support 3DES-CBC Fan Zhang
2019-03-20 15:38           ` Fan Zhang
2019-03-20 15:38         ` [dpdk-dev] [PATCH v5 4/5] ipsec-secgw: add 3des test files Fan Zhang
2019-03-20 15:38           ` Fan Zhang
2019-03-20 15:38         ` [dpdk-dev] [PATCH v5 5/5] doc: update release note Fan Zhang
2019-03-20 15:38           ` Fan Zhang
2019-03-22 14:59         ` [dpdk-dev] [PATCH v5 0/5] ipsec: support AES-CTR and 3DES-CBC Akhil Goyal
2019-03-22 14:59           ` Akhil Goyal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2f17fba4-38ff-97bb-f77c-e8cdbfba09c3@nxp.com \
    --to=akhil.goyal@nxp.com \
    --cc=dev@dpdk.org \
    --cc=konstantin.ananyev@intel.com \
    --cc=roy.fan.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).