Re: [dpdk-dev] [PATCH v4 1/5] net/af_xdp: introduce AF XDP PMD driver

[Ye Xiaolong <xiaolong.ye@intel.com>]

On 03/22, Maxime Coquelin wrote:
>
>
>On 3/22/19 2:01 PM, Xiaolong Ye wrote:
>> Add a new PMD driver for AF_XDP which is a proposed faster version of
>> AF_PACKET interface in Linux. More info about AF_XDP, please refer to [1]
>> [2].
>> 
>> This is the vanilla version PMD which just uses a raw buffer registered as
>> the umem.
>> 
>> [1] https://fosdem.org/2018/schedule/event/af_xdp/
>> [2] https://lwn.net/Articles/745934/
>> 
>> Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
>> ---
>>   MAINTAINERS                                   |   6 +
>>   config/common_base                            |   5 +
>>   config/common_linux                           |   1 +
>>   doc/guides/nics/af_xdp.rst                    |  45 +
>>   doc/guides/nics/features/af_xdp.ini           |  11 +
>>   doc/guides/nics/index.rst                     |   1 +
>>   doc/guides/rel_notes/release_19_05.rst        |   7 +
>>   drivers/net/Makefile                          |   1 +
>>   drivers/net/af_xdp/Makefile                   |  32 +
>>   drivers/net/af_xdp/meson.build                |  21 +
>>   drivers/net/af_xdp/rte_eth_af_xdp.c           | 940 ++++++++++++++++++
>>   drivers/net/af_xdp/rte_pmd_af_xdp_version.map |   3 +
>>   drivers/net/meson.build                       |   1 +
>>   mk/rte.app.mk                                 |   1 +
>>   14 files changed, 1075 insertions(+)
>>   create mode 100644 doc/guides/nics/af_xdp.rst
>>   create mode 100644 doc/guides/nics/features/af_xdp.ini
>>   create mode 100644 drivers/net/af_xdp/Makefile
>>   create mode 100644 drivers/net/af_xdp/meson.build
>>   create mode 100644 drivers/net/af_xdp/rte_eth_af_xdp.c
>>   create mode 100644 drivers/net/af_xdp/rte_pmd_af_xdp_version.map
>> 
>
>...
>
>> diff --git a/config/common_base b/config/common_base
>> index 0b09a9348..4044de205 100644
>> --- a/config/common_base
>> +++ b/config/common_base
>> @@ -416,6 +416,11 @@ CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
>>   #
>>   CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
>> +#
>> +# Compile software PMD backed by AF_XDP sockets (Linux only)
>> +#
>> +CONFIG_RTE_LIBRTE_PMD_AF_XDP=n
>> +
>>   #
>>   # Compile link bonding PMD library
>>   #
>> diff --git a/config/common_linux b/config/common_linux
>> index 75334273d..0b1249da0 100644
>> --- a/config/common_linux
>> +++ b/config/common_linux
>> @@ -19,6 +19,7 @@ CONFIG_RTE_LIBRTE_VHOST_POSTCOPY=n
>>   CONFIG_RTE_LIBRTE_PMD_VHOST=y
>>   CONFIG_RTE_LIBRTE_IFC_PMD=y
>>   CONFIG_RTE_LIBRTE_PMD_AF_PACKET=y
>> +CONFIG_RTE_LIBRTE_PMD_AF_XDP=y
>
>It has to be disabled by default as it requires headers from kernels
>more recent than minimum kernel version supported by DPDK.

Ok, got it.

>
>>   CONFIG_RTE_LIBRTE_PMD_SOFTNIC=y
>>   CONFIG_RTE_LIBRTE_PMD_TAP=y
>>   CONFIG_RTE_LIBRTE_AVP_PMD=y
>
>...
>
>> diff --git a/drivers/net/af_xdp/meson.build b/drivers/net/af_xdp/meson.build
>> new file mode 100644
>> index 000000000..635e67483
>> --- /dev/null
>> +++ b/drivers/net/af_xdp/meson.build
>> @@ -0,0 +1,21 @@
>> +# SPDX-License-Identifier: BSD-3-Clause
>> +# Copyright(c) 2018 Intel Corporation
>> +
>> +if host_machine.system() != 'linux'
>> +	build = false
>> +endif
>> +
>> +bpf_dep = dependency('libbpf', required: false)
>> +if bpf_dep.found()
>> +	build = true
>> +else
>> +	bpf_dep = cc.find_library('libbpf', required: false)
>> +	if bpf_dep.found() and cc.has_header('xsk.h', dependencies: bpf_dep)
>> +		build = true
>> +		pkgconfig_extra_libs += '-lbpf'
>> +	else
>> +		build = false
>> +	endif
>> +endif
>
>I think you need to add more checks, as above does not cover
>linux/if_xdp.h header IIUC.

will add more.

>
>> +sources = files('rte_eth_af_xdp.c')
>> +ext_deps += bpf_dep
>> diff --git a/drivers/net/af_xdp/rte_eth_af_xdp.c b/drivers/net/af_xdp/rte_eth_af_xdp.c
>> new file mode 100644
>> index 000000000..9f0012347
>> --- /dev/null
>> +++ b/drivers/net/af_xdp/rte_eth_af_xdp.c
>> @@ -0,0 +1,940 @@
>> +/* SPDX-License-Identifier: BSD-3-Clause
>> + * Copyright(c) 2019 Intel Corporation.
>> + */
>> +
>> +#include <rte_mbuf.h>
>> +#include <rte_ethdev_driver.h>
>> +#include <rte_ethdev_vdev.h>
>> +#include <rte_malloc.h>
>> +#include <rte_kvargs.h>
>> +#include <rte_bus_vdev.h>
>> +#include <rte_string_fns.h>
>> +
>> +#include <linux/if_ether.h>
>> +#include <linux/if_xdp.h>
>> +#include <linux/if_link.h>
>> +#include <asm/barrier.h>
>> +#include <arpa/inet.h>
>> +#include <net/if.h>
>> +#include <sys/types.h>
>> +#include <sys/socket.h>
>> +#include <sys/ioctl.h>
>> +#include <sys/mman.h>
>> +#include <unistd.h>
>> +#include <poll.h>
>> +#include <bpf/bpf.h>
>> +#include <xsk.h>
>> +
>> +#ifndef SOL_XDP
>> +#define SOL_XDP 283
>> +#endif
>> +
>> +#ifndef AF_XDP
>> +#define AF_XDP 44
>> +#endif
>> +
>> +#ifndef PF_XDP
>> +#define PF_XDP AF_XDP
>> +#endif
>> +
>> +static int af_xdp_logtype;
>> +
>> +#define AF_XDP_LOG(level, fmt, args...)			\
>> +	rte_log(RTE_LOG_ ## level, af_xdp_logtype,	\
>> +		"%s(): " fmt "\n", __func__, ##args)
>> +
>> +#define ETH_AF_XDP_IFACE_ARG			"iface"
>> +#define ETH_AF_XDP_QUEUE_IDX_ARG		"queue"
>> +
>> +#define ETH_AF_XDP_FRAME_SIZE		XSK_UMEM__DEFAULT_FRAME_SIZE
>> +#define ETH_AF_XDP_NUM_BUFFERS		4096
>> +#define ETH_AF_XDP_DATA_HEADROOM	0
>> +#define ETH_AF_XDP_DFLT_NUM_DESCS	XSK_RING_CONS__DEFAULT_NUM_DESCS
>> +#define ETH_AF_XDP_DFLT_QUEUE_IDX	0
>> +
>> +#define ETH_AF_XDP_RX_BATCH_SIZE	32
>> +#define ETH_AF_XDP_TX_BATCH_SIZE	32
>> +
>> +#define ETH_AF_XDP_MAX_QUEUE_PAIRS     16
>> +
>> +struct xsk_umem_info {
>> +	struct xsk_ring_prod fq;
>> +	struct xsk_ring_cons cq;
>> +	struct xsk_umem *umem;
>> +	struct rte_ring *buf_ring;
>> +	void *buffer;
>> +};
>> +
>> +struct rx_stats {
>> +	uint64_t rx_pkts;
>> +	uint64_t rx_bytes;
>> +	uint64_t rx_dropped;
>> +};
>> +
>> +struct pkt_rx_queue {
>> +	struct xsk_ring_cons rx;
>> +	struct xsk_umem_info *umem;
>> +	struct xsk_socket *xsk;
>> +	struct rte_mempool *mb_pool;
>> +
>> +	struct rx_stats stats;
>> +
>> +	struct pkt_tx_queue *pair;
>> +	uint16_t queue_idx;
>> +};
>> +
>> +struct tx_stats {
>> +	uint64_t tx_pkts;
>> +	uint64_t err_pkts;
>> +	uint64_t tx_bytes;
>> +};
>> +
>> +struct pkt_tx_queue {
>> +	struct xsk_ring_prod tx;
>> +
>> +	struct tx_stats stats;
>> +
>> +	struct pkt_rx_queue *pair;
>> +	uint16_t queue_idx;
>> +};
>> +
>> +struct pmd_internals {
>> +	int if_index;
>> +	char if_name[IFNAMSIZ];
>> +	uint16_t queue_idx;
>> +	struct ether_addr eth_addr;
>> +	struct xsk_umem_info *umem;
>> +	struct rte_mempool *mb_pool_share;
>> +
>> +	struct pkt_rx_queue rx_queues[ETH_AF_XDP_MAX_QUEUE_PAIRS];
>> +	struct pkt_tx_queue tx_queues[ETH_AF_XDP_MAX_QUEUE_PAIRS];
>> +};
>> +
>> +static const char * const valid_arguments[] = {
>> +	ETH_AF_XDP_IFACE_ARG,
>> +	ETH_AF_XDP_QUEUE_IDX_ARG,
>> +	NULL
>> +};
>> +
>> +static struct rte_eth_link pmd_link = {
>> +	.link_speed = ETH_SPEED_NUM_10G,
>> +	.link_duplex = ETH_LINK_FULL_DUPLEX,
>> +	.link_status = ETH_LINK_DOWN,
>> +	.link_autoneg = ETH_LINK_AUTONEG
>> +};
>> +
>> +static inline int
>> +reserve_fill_queue(struct xsk_umem_info *umem, int reserve_size)
>> +{
>> +	struct xsk_ring_prod *fq = &umem->fq;
>> +	uint32_t idx;
>> +	void *addr = NULL;
>> +	int i, ret;
>> +
>> +	ret = xsk_ring_prod__reserve(fq, reserve_size, &idx);
>> +	if (!ret) {
>
>You could use unlikely() here as it is called in the hot path.

Got it.

>
>> +		AF_XDP_LOG(ERR, "Failed to reserve enough fq descs.\n");
>> +		return ret;
>> +	}
>> +
>> +	for (i = 0; i < reserve_size; i++) {
>> +		__u64 *fq_addr;
>
>For consistency, you could either declare addr here, or fq_addr at the
>top of the function.

ok, will make the code consistent in next version.

>
>> +		if (rte_ring_dequeue(umem->buf_ring, &addr)) {
>> +			i--;
>> +			break;
>> +		}
>> +		fq_addr = xsk_ring_prod__fill_addr(fq, idx++);
>> +		*fq_addr = (uint64_t)addr;
>> +	}
>> +
>> +	xsk_ring_prod__submit(fq, i);
>> +
>> +	return 0;
>> +}
>> +
>> +static uint16_t
>> +eth_af_xdp_rx(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts)
>> +{
>> +	struct pkt_rx_queue *rxq = queue;
>> +	struct xsk_ring_cons *rx = &rxq->rx;
>> +	struct xsk_umem_info *umem = rxq->umem;
>> +	struct xsk_ring_prod *fq = &umem->fq;
>> +	uint32_t idx_rx;
>> +	uint32_t free_thresh = fq->size >> 1;
>> +	struct rte_mbuf *mbufs[ETH_AF_XDP_TX_BATCH_SIZE];
>> +	unsigned long dropped = 0;
>> +	unsigned long rx_bytes = 0;
>> +	uint16_t count = 0;
>> +	int rcvd, i;
>> +
>> +	nb_pkts = RTE_MIN(nb_pkts, ETH_AF_XDP_TX_BATCH_SIZE);
>> +
>> +	rcvd = xsk_ring_cons__peek(rx, nb_pkts, &idx_rx);
>> +	if (rcvd == 0)
>> +		return 0;
>> +
>> +	if (xsk_prod_nb_free(fq, free_thresh) >= free_thresh)
>> +		(void)reserve_fill_queue(umem, ETH_AF_XDP_RX_BATCH_SIZE);
>> +
>> +	if (rte_pktmbuf_alloc_bulk(rxq->mb_pool, mbufs, rcvd) != 0)
>unlikely()?

Got it.

>> +		return 0;
>> +
>> +	for (i = 0; i < rcvd; i++) {
>> +		const struct xdp_desc *desc;
>> +		uint64_t addr;
>> +		uint32_t len;
>> +		void *pkt;
>> +
>> +		desc = xsk_ring_cons__rx_desc(rx, idx_rx++);
>> +		addr = desc->addr;
>> +		len = desc->len;
>> +		pkt = xsk_umem__get_data(rxq->umem->buffer, addr);
>> +
>> +		rte_memcpy(rte_pktmbuf_mtod(mbufs[i], void *), pkt, len);
>> +		rte_pktmbuf_pkt_len(mbufs[i]) = len;
>> +		rte_pktmbuf_data_len(mbufs[i]) = len;
>> +		rx_bytes += len;
>> +		bufs[count++] = mbufs[i];
>> +
>> +		rte_ring_enqueue(umem->buf_ring, (void *)addr);
>> +	}
>> +
>> +	xsk_ring_cons__release(rx, rcvd);
>> +
>> +	/* statistics */
>> +	rxq->stats.rx_pkts += (rcvd - dropped);
>> +	rxq->stats.rx_bytes += rx_bytes;
>> +
>> +	return count;
>> +}
>> +
>
>...
>
>> +
>> +/* This function gets called when the current port gets stopped. */
>> +static void
>> +eth_dev_stop(struct rte_eth_dev *dev)
>> +{
>> +	dev->data->dev_link.link_status = ETH_LINK_DOWN;
>> +}
>> +
>> +static int
>> +eth_dev_configure(struct rte_eth_dev *dev __rte_unused)
>
>Remove __rte_unused.

oops, my bad, will remove it.

>
>> +{
>> +	/* rx/tx must be paired */
>> +	if (dev->data->nb_rx_queues != dev->data->nb_tx_queues)
>> +		return -EINVAL;
>> +
>> +	return 0;
>> +}
>> +
>
>...
>
>> +
>> +static int
>> +xsk_configure(struct pmd_internals *internals, struct pkt_rx_queue *rxq,
>> +	      int ring_size)
>> +{
>> +	struct xsk_socket_config cfg;
>> +	struct pkt_tx_queue *txq = rxq->pair;
>> +	int ret = 0;
>> +	int reserve_size;
>> +
>> +	rxq->umem = xdp_umem_configure();
>> +	if (rxq->umem == NULL) {
>> +		ret = -ENOMEM;
>> +		goto err;
>You can return directly here as umem == NULL.

Got it.

>
>> +	}
>> +
>> +	cfg.rx_size = ring_size;
>> +	cfg.tx_size = ring_size;
>> +	cfg.libbpf_flags = 0;
>> +	cfg.xdp_flags = XDP_FLAGS_UPDATE_IF_NOEXIST;
>> +	cfg.bind_flags = 0;
>> +	ret = xsk_socket__create(&rxq->xsk, internals->if_name,
>> +			internals->queue_idx, rxq->umem->umem, &rxq->rx,
>> +			&txq->tx, &cfg);
>> +	if (ret) {
>> +		AF_XDP_LOG(ERR, "Failed to create xsk socket.\n");
>> +		goto err;
>> +	}
>> +
>> +	reserve_size = ETH_AF_XDP_DFLT_NUM_DESCS / 2;
>> +	ret = reserve_fill_queue(rxq->umem, reserve_size);
>> +	if (ret) {
>> +		AF_XDP_LOG(ERR, "Failed to reserve fill queue.\n");
>> +		goto err;
>
>Shouldn't you call xsk_socket__delete(rxq->xsk) here?

Good catch, xsk socket does need to be deleted here.

>
>> +	}
>> +
>> +	return 0;
>> +
>> +err:
>> +	xdp_umem_destroy(rxq->umem);
>> +
>> +	return ret;
>> +}
>> +
>> +static void
>> +queue_reset(struct pmd_internals *internals, uint16_t queue_idx)
>> +{
>> +	struct pkt_rx_queue *rxq = &internals->rx_queues[queue_idx];
>> +	struct pkt_tx_queue *txq = rxq->pair;
>> +	int xsk_fd = xsk_socket__fd(rxq->xsk);
>> +
>> +	if (xsk_fd) {
>> +		close(xsk_fd);
>> +		if (internals->umem != NULL) {
>
>Moving this condition out would work and be cleaner.
>
>Anyway, it seems to never enter this condition as internal->umem is not
>set yet when queue_reset() is called.

You are right, internal->umem and xsk_fd shouldn't be handled here, will refine
the code.

>
>> +			xdp_umem_destroy(internals->umem);
>> +			internals->umem = NULL;
>> +		}
>> +	}
>> +	memset(rxq, 0, sizeof(*rxq));
>> +	memset(txq, 0, sizeof(*txq));
>> +	rxq->pair = txq;
>> +	txq->pair = rxq;
>> +	rxq->queue_idx = queue_idx;
>> +	txq->queue_idx = queue_idx;
>> +}
>> +
>> +static int
>> +eth_rx_queue_setup(struct rte_eth_dev *dev,
>> +		   uint16_t rx_queue_id,
>> +		   uint16_t nb_rx_desc,
>> +		   unsigned int socket_id __rte_unused,
>> +		   const struct rte_eth_rxconf *rx_conf __rte_unused,
>> +		   struct rte_mempool *mb_pool)
>> +{
>> +	struct pmd_internals *internals = dev->data->dev_private;
>> +	uint32_t buf_size, data_size;
>> +	struct pkt_rx_queue *rxq;
>> +	int ret;
>> +
>> +	rxq = &internals->rx_queues[rx_queue_id];
>> +	queue_reset(internals, rx_queue_id);
>> +
>> +	/* Now get the space available for data in the mbuf */
>> +	buf_size = rte_pktmbuf_data_room_size(mb_pool) -
>> +		RTE_PKTMBUF_HEADROOM;
>> +	data_size = ETH_AF_XDP_FRAME_SIZE - ETH_AF_XDP_DATA_HEADROOM;
>> +
>> +	if (data_size > buf_size) {
>> +		AF_XDP_LOG(ERR, "%s: %d bytes will not fit in mbuf (%d bytes)\n",
>> +			dev->device->name, data_size, buf_size);
>> +		ret = -ENOMEM;
>> +		goto err;
>> +	}
>> +
>> +	rxq->mb_pool = mb_pool;
>> +
>> +	if (xsk_configure(internals, rxq, nb_rx_desc)) {
>> +		AF_XDP_LOG(ERR, "Failed to configure xdp socket\n");
>> +		ret = -EINVAL;
>> +		goto err;
>> +	}
>> +
>> +	internals->umem = rxq->umem;
>
>If my previous comment is wrong, i.e. internals->umem may be already set
>when queue_reset() is called, then it means you might have a leak here.
>
>> +
>> +	dev->data->rx_queues[rx_queue_id] = rxq;
>> +	return 0;
>> +
>> +err:
>> +	queue_reset(internals, rx_queue_id);
>> +	return ret;
>> +}
>> +