From: Wenzhuo Lu <wenzhuo.lu@intel.com>
To: dev@dpdk.org
Cc: Wenzhuo Lu <wenzhuo.lu@intel.com>
Subject: [dpdk-dev] [PATCH v6 6/8] net/ice: support Rx AVX2 vector
Date: Mon, 25 Mar 2019 14:06:33 +0800 [thread overview]
Message-ID: <1553493995-29803-7-git-send-email-wenzhuo.lu@intel.com> (raw)
Message-ID: <20190325060633.q5xp7_wbwtEm5RlNdTHEpj4UX0gd4_ycTUGmUb5J3Mc@z> (raw)
In-Reply-To: <1553493995-29803-1-git-send-email-wenzhuo.lu@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
---
drivers/net/ice/Makefile | 19 ++
drivers/net/ice/ice_rxtx.c | 16 +-
drivers/net/ice/ice_rxtx.h | 2 +
drivers/net/ice/ice_rxtx_vec_avx2.c | 622 ++++++++++++++++++++++++++++++++++++
drivers/net/ice/meson.build | 15 +
5 files changed, 671 insertions(+), 3 deletions(-)
create mode 100644 drivers/net/ice/ice_rxtx_vec_avx2.c
diff --git a/drivers/net/ice/Makefile b/drivers/net/ice/Makefile
index 92594bb..5ba59f4 100644
--- a/drivers/net/ice/Makefile
+++ b/drivers/net/ice/Makefile
@@ -58,4 +58,23 @@ ifeq ($(CONFIG_RTE_ARCH_X86), y)
SRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) += ice_rxtx_vec_sse.c
endif
+ifeq ($(findstring RTE_MACHINE_CPUFLAG_AVX2,$(CFLAGS)),RTE_MACHINE_CPUFLAG_AVX2)
+ CC_AVX2_SUPPORT=1
+else
+ CC_AVX2_SUPPORT=\
+ $(shell $(CC) -march=core-avx2 -dM -E - </dev/null 2>&1 | \
+ grep -q AVX2 && echo 1)
+ ifeq ($(CC_AVX2_SUPPORT), 1)
+ ifeq ($(CONFIG_RTE_TOOLCHAIN_ICC),y)
+ CFLAGS_ice_rxtx_vec_avx2.o += -march=core-avx2
+ else
+ CFLAGS_ice_rxtx_vec_avx2.o += -mavx2
+ endif
+ endif
+endif
+
+ifeq ($(CC_AVX2_SUPPORT), 1)
+ SRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) += ice_rxtx_vec_avx2.c
+endif
+
include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/net/ice/ice_rxtx.c b/drivers/net/ice/ice_rxtx.c
index f9ecffa..6191f34 100644
--- a/drivers/net/ice/ice_rxtx.c
+++ b/drivers/net/ice/ice_rxtx.c
@@ -1494,7 +1494,8 @@
#ifdef RTE_ARCH_X86
if (dev->rx_pkt_burst == ice_recv_pkts_vec ||
- dev->rx_pkt_burst == ice_recv_scattered_pkts_vec)
+ dev->rx_pkt_burst == ice_recv_scattered_pkts_vec ||
+ dev->rx_pkt_burst == ice_recv_pkts_vec_avx2)
return ptypes;
#endif
@@ -2236,21 +2237,30 @@ void __attribute__((cold))
#ifdef RTE_ARCH_X86
struct ice_rx_queue *rxq;
int i;
+ bool use_avx2 = false;
if (!ice_rx_vec_dev_check(dev)) {
for (i = 0; i < dev->data->nb_rx_queues; i++) {
rxq = dev->data->rx_queues[i];
(void)ice_rxq_vec_setup(rxq);
}
+
+ if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_AVX2) == 1 ||
+ rte_cpu_get_flag_enabled(RTE_CPUFLAG_AVX512F) == 1)
+ use_avx2 = true;
+
if (dev->data->scattered_rx) {
PMD_DRV_LOG(DEBUG,
"Using Vector Scattered Rx (port %d).",
dev->data->port_id);
dev->rx_pkt_burst = ice_recv_scattered_pkts_vec;
} else {
- PMD_DRV_LOG(DEBUG, "Using Vector Rx (port %d).",
+ PMD_DRV_LOG(DEBUG, "Using %sVector Rx (port %d).",
+ use_avx2 ? "avx2 " : "",
dev->data->port_id);
- dev->rx_pkt_burst = ice_recv_pkts_vec;
+ dev->rx_pkt_burst = use_avx2 ?
+ ice_recv_pkts_vec_avx2 :
+ ice_recv_pkts_vec;
}
return;
diff --git a/drivers/net/ice/ice_rxtx.h b/drivers/net/ice/ice_rxtx.h
index 1dde4e7..d1c9b92 100644
--- a/drivers/net/ice/ice_rxtx.h
+++ b/drivers/net/ice/ice_rxtx.h
@@ -179,4 +179,6 @@ uint16_t ice_recv_scattered_pkts_vec(void *rx_queue, struct rte_mbuf **rx_pkts,
uint16_t nb_pkts);
uint16_t ice_xmit_pkts_vec(void *tx_queue, struct rte_mbuf **tx_pkts,
uint16_t nb_pkts);
+uint16_t ice_recv_pkts_vec_avx2(void *rx_queue, struct rte_mbuf **rx_pkts,
+ uint16_t nb_pkts);
#endif /* _ICE_RXTX_H_ */
diff --git a/drivers/net/ice/ice_rxtx_vec_avx2.c b/drivers/net/ice/ice_rxtx_vec_avx2.c
new file mode 100644
index 0000000..42f761d
--- /dev/null
+++ b/drivers/net/ice/ice_rxtx_vec_avx2.c
@@ -0,0 +1,622 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2019 Intel Corporation
+ */
+
+#include "ice_rxtx_vec_common.h"
+
+#include <x86intrin.h>
+
+#ifndef __INTEL_COMPILER
+#pragma GCC diagnostic ignored "-Wcast-qual"
+#endif
+
+static inline void
+ice_rxq_rearm(struct ice_rx_queue *rxq)
+{
+ int i;
+ uint16_t rx_id;
+ volatile union ice_rx_desc *rxdp;
+ struct ice_rx_entry *rxep = &rxq->sw_ring[rxq->rxrearm_start];
+
+ rxdp = rxq->rx_ring + rxq->rxrearm_start;
+
+ /* Pull 'n' more MBUFs into the software ring */
+ if (rte_mempool_get_bulk(rxq->mp,
+ (void *)rxep,
+ ICE_RXQ_REARM_THRESH) < 0) {
+ if (rxq->rxrearm_nb + ICE_RXQ_REARM_THRESH >=
+ rxq->nb_rx_desc) {
+ __m128i dma_addr0;
+
+ dma_addr0 = _mm_setzero_si128();
+ for (i = 0; i < ICE_DESCS_PER_LOOP; i++) {
+ rxep[i].mbuf = &rxq->fake_mbuf;
+ _mm_store_si128((__m128i *)&rxdp[i].read,
+ dma_addr0);
+ }
+ }
+ rte_eth_devices[rxq->port_id].data->rx_mbuf_alloc_failed +=
+ ICE_RXQ_REARM_THRESH;
+ return;
+ }
+
+#ifndef RTE_LIBRTE_ICE_16BYTE_RX_DESC
+ struct rte_mbuf *mb0, *mb1;
+ __m128i dma_addr0, dma_addr1;
+ __m128i hdr_room = _mm_set_epi64x(RTE_PKTMBUF_HEADROOM,
+ RTE_PKTMBUF_HEADROOM);
+ /* Initialize the mbufs in vector, process 2 mbufs in one loop */
+ for (i = 0; i < ICE_RXQ_REARM_THRESH; i += 2, rxep += 2) {
+ __m128i vaddr0, vaddr1;
+
+ mb0 = rxep[0].mbuf;
+ mb1 = rxep[1].mbuf;
+
+ /* load buf_addr(lo 64bit) and buf_physaddr(hi 64bit) */
+ RTE_BUILD_BUG_ON(offsetof(struct rte_mbuf, buf_physaddr) !=
+ offsetof(struct rte_mbuf, buf_addr) + 8);
+ vaddr0 = _mm_loadu_si128((__m128i *)&mb0->buf_addr);
+ vaddr1 = _mm_loadu_si128((__m128i *)&mb1->buf_addr);
+
+ /* convert pa to dma_addr hdr/data */
+ dma_addr0 = _mm_unpackhi_epi64(vaddr0, vaddr0);
+ dma_addr1 = _mm_unpackhi_epi64(vaddr1, vaddr1);
+
+ /* add headroom to pa values */
+ dma_addr0 = _mm_add_epi64(dma_addr0, hdr_room);
+ dma_addr1 = _mm_add_epi64(dma_addr1, hdr_room);
+
+ /* flush desc with pa dma_addr */
+ _mm_store_si128((__m128i *)&rxdp++->read, dma_addr0);
+ _mm_store_si128((__m128i *)&rxdp++->read, dma_addr1);
+ }
+#else
+ struct rte_mbuf *mb0, *mb1, *mb2, *mb3;
+ __m256i dma_addr0_1, dma_addr2_3;
+ __m256i hdr_room = _mm256_set1_epi64x(RTE_PKTMBUF_HEADROOM);
+ /* Initialize the mbufs in vector, process 4 mbufs in one loop */
+ for (i = 0; i < ICE_RXQ_REARM_THRESH;
+ i += 4, rxep += 4, rxdp += 4) {
+ __m128i vaddr0, vaddr1, vaddr2, vaddr3;
+ __m256i vaddr0_1, vaddr2_3;
+
+ mb0 = rxep[0].mbuf;
+ mb1 = rxep[1].mbuf;
+ mb2 = rxep[2].mbuf;
+ mb3 = rxep[3].mbuf;
+
+ /* load buf_addr(lo 64bit) and buf_physaddr(hi 64bit) */
+ RTE_BUILD_BUG_ON(offsetof(struct rte_mbuf, buf_physaddr) !=
+ offsetof(struct rte_mbuf, buf_addr) + 8);
+ vaddr0 = _mm_loadu_si128((__m128i *)&mb0->buf_addr);
+ vaddr1 = _mm_loadu_si128((__m128i *)&mb1->buf_addr);
+ vaddr2 = _mm_loadu_si128((__m128i *)&mb2->buf_addr);
+ vaddr3 = _mm_loadu_si128((__m128i *)&mb3->buf_addr);
+
+ /**
+ * merge 0 & 1, by casting 0 to 256-bit and inserting 1
+ * into the high lanes. Similarly for 2 & 3
+ */
+ vaddr0_1 =
+ _mm256_inserti128_si256(_mm256_castsi128_si256(vaddr0),
+ vaddr1, 1);
+ vaddr2_3 =
+ _mm256_inserti128_si256(_mm256_castsi128_si256(vaddr2),
+ vaddr3, 1);
+
+ /* convert pa to dma_addr hdr/data */
+ dma_addr0_1 = _mm256_unpackhi_epi64(vaddr0_1, vaddr0_1);
+ dma_addr2_3 = _mm256_unpackhi_epi64(vaddr2_3, vaddr2_3);
+
+ /* add headroom to pa values */
+ dma_addr0_1 = _mm256_add_epi64(dma_addr0_1, hdr_room);
+ dma_addr2_3 = _mm256_add_epi64(dma_addr2_3, hdr_room);
+
+ /* flush desc with pa dma_addr */
+ _mm256_store_si256((__m256i *)&rxdp->read, dma_addr0_1);
+ _mm256_store_si256((__m256i *)&(rxdp + 2)->read, dma_addr2_3);
+ }
+
+#endif
+
+ rxq->rxrearm_start += ICE_RXQ_REARM_THRESH;
+ if (rxq->rxrearm_start >= rxq->nb_rx_desc)
+ rxq->rxrearm_start = 0;
+
+ rxq->rxrearm_nb -= ICE_RXQ_REARM_THRESH;
+
+ rx_id = (uint16_t)((rxq->rxrearm_start == 0) ?
+ (rxq->nb_rx_desc - 1) : (rxq->rxrearm_start - 1));
+
+ /* Update the tail pointer on the NIC */
+ ICE_PCI_REG_WRITE(rxq->qrx_tail, rx_id);
+}
+
+#define PKTLEN_SHIFT 10
+
+static inline uint16_t
+_ice_recv_raw_pkts_vec_avx2(struct ice_rx_queue *rxq, struct rte_mbuf **rx_pkts,
+ uint16_t nb_pkts, uint8_t *split_packet)
+{
+#define ICE_DESCS_PER_LOOP_AVX 8
+
+ const uint32_t *ptype_tbl = rxq->vsi->adapter->ptype_tbl;
+ const __m256i mbuf_init = _mm256_set_epi64x(0, 0,
+ 0, rxq->mbuf_initializer);
+ struct ice_rx_entry *sw_ring = &rxq->sw_ring[rxq->rx_tail];
+ volatile union ice_rx_desc *rxdp = rxq->rx_ring + rxq->rx_tail;
+ const int avx_aligned = ((rxq->rx_tail & 1) == 0);
+
+ rte_prefetch0(rxdp);
+
+ /* nb_pkts has to be floor-aligned to ICE_DESCS_PER_LOOP_AVX */
+ nb_pkts = RTE_ALIGN_FLOOR(nb_pkts, ICE_DESCS_PER_LOOP_AVX);
+
+ /* See if we need to rearm the RX queue - gives the prefetch a bit
+ * of time to act
+ */
+ if (rxq->rxrearm_nb > ICE_RXQ_REARM_THRESH)
+ ice_rxq_rearm(rxq);
+
+ /* Before we start moving massive data around, check to see if
+ * there is actually a packet available
+ */
+ if (!(rxdp->wb.qword1.status_error_len &
+ rte_cpu_to_le_32(1 << ICE_RX_DESC_STATUS_DD_S)))
+ return 0;
+
+ /* constants used in processing loop */
+ const __m256i crc_adjust =
+ _mm256_set_epi16
+ (/* first descriptor */
+ 0, 0, 0, /* ignore non-length fields */
+ -rxq->crc_len, /* sub crc on data_len */
+ 0, /* ignore high-16bits of pkt_len */
+ -rxq->crc_len, /* sub crc on pkt_len */
+ 0, 0, /* ignore pkt_type field */
+ /* second descriptor */
+ 0, 0, 0, /* ignore non-length fields */
+ -rxq->crc_len, /* sub crc on data_len */
+ 0, /* ignore high-16bits of pkt_len */
+ -rxq->crc_len, /* sub crc on pkt_len */
+ 0, 0 /* ignore pkt_type field */
+ );
+
+ /* 8 packets DD mask, LSB in each 32-bit value */
+ const __m256i dd_check = _mm256_set1_epi32(1);
+
+ /* 8 packets EOP mask, second-LSB in each 32-bit value */
+ const __m256i eop_check = _mm256_slli_epi32(dd_check,
+ ICE_RX_DESC_STATUS_EOF_S);
+
+ /* mask to shuffle from desc. to mbuf (2 descriptors)*/
+ const __m256i shuf_msk =
+ _mm256_set_epi8
+ (/* first descriptor */
+ 7, 6, 5, 4, /* octet 4~7, 32bits rss */
+ 3, 2, /* octet 2~3, low 16 bits vlan_macip */
+ 15, 14, /* octet 15~14, 16 bits data_len */
+ 0xFF, 0xFF, /* skip high 16 bits pkt_len, zero out */
+ 15, 14, /* octet 15~14, low 16 bits pkt_len */
+ 0xFF, 0xFF, /* pkt_type set as unknown */
+ 0xFF, 0xFF, /*pkt_type set as unknown */
+ /* second descriptor */
+ 7, 6, 5, 4, /* octet 4~7, 32bits rss */
+ 3, 2, /* octet 2~3, low 16 bits vlan_macip */
+ 15, 14, /* octet 15~14, 16 bits data_len */
+ 0xFF, 0xFF, /* skip high 16 bits pkt_len, zero out */
+ 15, 14, /* octet 15~14, low 16 bits pkt_len */
+ 0xFF, 0xFF, /* pkt_type set as unknown */
+ 0xFF, 0xFF /*pkt_type set as unknown */
+ );
+ /**
+ * compile-time check the above crc and shuffle layout is correct.
+ * NOTE: the first field (lowest address) is given last in set_epi
+ * calls above.
+ */
+ RTE_BUILD_BUG_ON(offsetof(struct rte_mbuf, pkt_len) !=
+ offsetof(struct rte_mbuf, rx_descriptor_fields1) + 4);
+ RTE_BUILD_BUG_ON(offsetof(struct rte_mbuf, data_len) !=
+ offsetof(struct rte_mbuf, rx_descriptor_fields1) + 8);
+ RTE_BUILD_BUG_ON(offsetof(struct rte_mbuf, vlan_tci) !=
+ offsetof(struct rte_mbuf, rx_descriptor_fields1) + 10);
+ RTE_BUILD_BUG_ON(offsetof(struct rte_mbuf, hash) !=
+ offsetof(struct rte_mbuf, rx_descriptor_fields1) + 12);
+
+ /* Status/Error flag masks */
+ /**
+ * mask everything except RSS, flow director and VLAN flags
+ * bit2 is for VLAN tag, bit11 for flow director indication
+ * bit13:12 for RSS indication. Bits 3-5 of error
+ * field (bits 22-24) are for IP/L4 checksum errors
+ */
+ const __m256i flags_mask =
+ _mm256_set1_epi32((1 << 2) | (1 << 11) |
+ (3 << 12) | (7 << 22));
+ /**
+ * data to be shuffled by result of flag mask. If VLAN bit is set,
+ * (bit 2), then position 4 in this array will be used in the
+ * destination
+ */
+ const __m256i vlan_flags_shuf =
+ _mm256_set_epi32(0, 0, PKT_RX_VLAN | PKT_RX_VLAN_STRIPPED, 0,
+ 0, 0, PKT_RX_VLAN | PKT_RX_VLAN_STRIPPED, 0);
+ /**
+ * data to be shuffled by result of flag mask, shifted down 11.
+ * If RSS/FDIR bits are set, shuffle moves appropriate flags in
+ * place.
+ */
+ const __m256i rss_flags_shuf =
+ _mm256_set_epi8(0, 0, 0, 0, 0, 0, 0, 0,
+ PKT_RX_RSS_HASH | PKT_RX_FDIR, PKT_RX_RSS_HASH,
+ 0, 0, 0, 0, PKT_RX_FDIR, 0,/* end up 128-bits */
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ PKT_RX_RSS_HASH | PKT_RX_FDIR, PKT_RX_RSS_HASH,
+ 0, 0, 0, 0, PKT_RX_FDIR, 0);
+
+ /**
+ * data to be shuffled by the result of the flags mask shifted by 22
+ * bits. This gives use the l3_l4 flags.
+ */
+ const __m256i l3_l4_flags_shuf = _mm256_set_epi8(0, 0, 0, 0, 0, 0, 0, 0,
+ /* shift right 1 bit to make sure it not exceed 255 */
+ (PKT_RX_EIP_CKSUM_BAD | PKT_RX_L4_CKSUM_BAD |
+ PKT_RX_IP_CKSUM_BAD) >> 1,
+ (PKT_RX_IP_CKSUM_GOOD | PKT_RX_EIP_CKSUM_BAD |
+ PKT_RX_L4_CKSUM_BAD) >> 1,
+ (PKT_RX_EIP_CKSUM_BAD | PKT_RX_IP_CKSUM_BAD) >> 1,
+ (PKT_RX_IP_CKSUM_GOOD | PKT_RX_EIP_CKSUM_BAD) >> 1,
+ (PKT_RX_L4_CKSUM_BAD | PKT_RX_IP_CKSUM_BAD) >> 1,
+ (PKT_RX_IP_CKSUM_GOOD | PKT_RX_L4_CKSUM_BAD) >> 1,
+ PKT_RX_IP_CKSUM_BAD >> 1,
+ (PKT_RX_IP_CKSUM_GOOD | PKT_RX_L4_CKSUM_GOOD) >> 1,
+ /* second 128-bits */
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ (PKT_RX_EIP_CKSUM_BAD | PKT_RX_L4_CKSUM_BAD |
+ PKT_RX_IP_CKSUM_BAD) >> 1,
+ (PKT_RX_IP_CKSUM_GOOD | PKT_RX_EIP_CKSUM_BAD |
+ PKT_RX_L4_CKSUM_BAD) >> 1,
+ (PKT_RX_EIP_CKSUM_BAD | PKT_RX_IP_CKSUM_BAD) >> 1,
+ (PKT_RX_IP_CKSUM_GOOD | PKT_RX_EIP_CKSUM_BAD) >> 1,
+ (PKT_RX_L4_CKSUM_BAD | PKT_RX_IP_CKSUM_BAD) >> 1,
+ (PKT_RX_IP_CKSUM_GOOD | PKT_RX_L4_CKSUM_BAD) >> 1,
+ PKT_RX_IP_CKSUM_BAD >> 1,
+ (PKT_RX_IP_CKSUM_GOOD | PKT_RX_L4_CKSUM_GOOD) >> 1);
+
+ const __m256i cksum_mask =
+ _mm256_set1_epi32(PKT_RX_IP_CKSUM_GOOD | PKT_RX_IP_CKSUM_BAD |
+ PKT_RX_L4_CKSUM_GOOD | PKT_RX_L4_CKSUM_BAD |
+ PKT_RX_EIP_CKSUM_BAD);
+
+ RTE_SET_USED(avx_aligned); /* for 32B descriptors we don't use this */
+
+ uint16_t i, received;
+
+ for (i = 0, received = 0; i < nb_pkts;
+ i += ICE_DESCS_PER_LOOP_AVX,
+ rxdp += ICE_DESCS_PER_LOOP_AVX) {
+ /* step 1, copy over 8 mbuf pointers to rx_pkts array */
+ _mm256_storeu_si256((void *)&rx_pkts[i],
+ _mm256_loadu_si256((void *)&sw_ring[i]));
+#ifdef RTE_ARCH_X86_64
+ _mm256_storeu_si256
+ ((void *)&rx_pkts[i + 4],
+ _mm256_loadu_si256((void *)&sw_ring[i + 4]));
+#endif
+
+ __m256i raw_desc0_1, raw_desc2_3, raw_desc4_5, raw_desc6_7;
+#ifdef RTE_LIBRTE_ICE_16BYTE_RX_DESC
+ /* for AVX we need alignment otherwise loads are not atomic */
+ if (avx_aligned) {
+ /* load in descriptors, 2 at a time, in reverse order */
+ raw_desc6_7 = _mm256_load_si256((void *)(rxdp + 6));
+ rte_compiler_barrier();
+ raw_desc4_5 = _mm256_load_si256((void *)(rxdp + 4));
+ rte_compiler_barrier();
+ raw_desc2_3 = _mm256_load_si256((void *)(rxdp + 2));
+ rte_compiler_barrier();
+ raw_desc0_1 = _mm256_load_si256((void *)(rxdp + 0));
+ } else
+#endif
+ {
+ const __m128i raw_desc7 =
+ _mm_load_si128((void *)(rxdp + 7));
+ rte_compiler_barrier();
+ const __m128i raw_desc6 =
+ _mm_load_si128((void *)(rxdp + 6));
+ rte_compiler_barrier();
+ const __m128i raw_desc5 =
+ _mm_load_si128((void *)(rxdp + 5));
+ rte_compiler_barrier();
+ const __m128i raw_desc4 =
+ _mm_load_si128((void *)(rxdp + 4));
+ rte_compiler_barrier();
+ const __m128i raw_desc3 =
+ _mm_load_si128((void *)(rxdp + 3));
+ rte_compiler_barrier();
+ const __m128i raw_desc2 =
+ _mm_load_si128((void *)(rxdp + 2));
+ rte_compiler_barrier();
+ const __m128i raw_desc1 =
+ _mm_load_si128((void *)(rxdp + 1));
+ rte_compiler_barrier();
+ const __m128i raw_desc0 =
+ _mm_load_si128((void *)(rxdp + 0));
+
+ raw_desc6_7 =
+ _mm256_inserti128_si256
+ (_mm256_castsi128_si256(raw_desc6),
+ raw_desc7, 1);
+ raw_desc4_5 =
+ _mm256_inserti128_si256
+ (_mm256_castsi128_si256(raw_desc4),
+ raw_desc5, 1);
+ raw_desc2_3 =
+ _mm256_inserti128_si256
+ (_mm256_castsi128_si256(raw_desc2),
+ raw_desc3, 1);
+ raw_desc0_1 =
+ _mm256_inserti128_si256
+ (_mm256_castsi128_si256(raw_desc0),
+ raw_desc1, 1);
+ }
+
+ if (split_packet) {
+ int j;
+
+ for (j = 0; j < ICE_DESCS_PER_LOOP_AVX; j++)
+ rte_mbuf_prefetch_part2(rx_pkts[i + j]);
+ }
+
+ /**
+ * convert descriptors 4-7 into mbufs, adjusting length and
+ * re-arranging fields. Then write into the mbuf
+ */
+ const __m256i len6_7 = _mm256_slli_epi32(raw_desc6_7,
+ PKTLEN_SHIFT);
+ const __m256i len4_5 = _mm256_slli_epi32(raw_desc4_5,
+ PKTLEN_SHIFT);
+ const __m256i desc6_7 = _mm256_blend_epi16(raw_desc6_7,
+ len6_7, 0x80);
+ const __m256i desc4_5 = _mm256_blend_epi16(raw_desc4_5,
+ len4_5, 0x80);
+ __m256i mb6_7 = _mm256_shuffle_epi8(desc6_7, shuf_msk);
+ __m256i mb4_5 = _mm256_shuffle_epi8(desc4_5, shuf_msk);
+
+ mb6_7 = _mm256_add_epi16(mb6_7, crc_adjust);
+ mb4_5 = _mm256_add_epi16(mb4_5, crc_adjust);
+ /**
+ * to get packet types, shift 64-bit values down 30 bits
+ * and so ptype is in lower 8-bits in each
+ */
+ const __m256i ptypes6_7 = _mm256_srli_epi64(desc6_7, 30);
+ const __m256i ptypes4_5 = _mm256_srli_epi64(desc4_5, 30);
+ const uint8_t ptype7 = _mm256_extract_epi8(ptypes6_7, 24);
+ const uint8_t ptype6 = _mm256_extract_epi8(ptypes6_7, 8);
+ const uint8_t ptype5 = _mm256_extract_epi8(ptypes4_5, 24);
+ const uint8_t ptype4 = _mm256_extract_epi8(ptypes4_5, 8);
+
+ mb6_7 = _mm256_insert_epi32(mb6_7, ptype_tbl[ptype7], 4);
+ mb6_7 = _mm256_insert_epi32(mb6_7, ptype_tbl[ptype6], 0);
+ mb4_5 = _mm256_insert_epi32(mb4_5, ptype_tbl[ptype5], 4);
+ mb4_5 = _mm256_insert_epi32(mb4_5, ptype_tbl[ptype4], 0);
+ /* merge the status bits into one register */
+ const __m256i status4_7 = _mm256_unpackhi_epi32(desc6_7,
+ desc4_5);
+
+ /**
+ * convert descriptors 0-3 into mbufs, adjusting length and
+ * re-arranging fields. Then write into the mbuf
+ */
+ const __m256i len2_3 = _mm256_slli_epi32(raw_desc2_3,
+ PKTLEN_SHIFT);
+ const __m256i len0_1 = _mm256_slli_epi32(raw_desc0_1,
+ PKTLEN_SHIFT);
+ const __m256i desc2_3 = _mm256_blend_epi16(raw_desc2_3,
+ len2_3, 0x80);
+ const __m256i desc0_1 = _mm256_blend_epi16(raw_desc0_1,
+ len0_1, 0x80);
+ __m256i mb2_3 = _mm256_shuffle_epi8(desc2_3, shuf_msk);
+ __m256i mb0_1 = _mm256_shuffle_epi8(desc0_1, shuf_msk);
+
+ mb2_3 = _mm256_add_epi16(mb2_3, crc_adjust);
+ mb0_1 = _mm256_add_epi16(mb0_1, crc_adjust);
+ /* get the packet types */
+ const __m256i ptypes2_3 = _mm256_srli_epi64(desc2_3, 30);
+ const __m256i ptypes0_1 = _mm256_srli_epi64(desc0_1, 30);
+ const uint8_t ptype3 = _mm256_extract_epi8(ptypes2_3, 24);
+ const uint8_t ptype2 = _mm256_extract_epi8(ptypes2_3, 8);
+ const uint8_t ptype1 = _mm256_extract_epi8(ptypes0_1, 24);
+ const uint8_t ptype0 = _mm256_extract_epi8(ptypes0_1, 8);
+
+ mb2_3 = _mm256_insert_epi32(mb2_3, ptype_tbl[ptype3], 4);
+ mb2_3 = _mm256_insert_epi32(mb2_3, ptype_tbl[ptype2], 0);
+ mb0_1 = _mm256_insert_epi32(mb0_1, ptype_tbl[ptype1], 4);
+ mb0_1 = _mm256_insert_epi32(mb0_1, ptype_tbl[ptype0], 0);
+ /* merge the status bits into one register */
+ const __m256i status0_3 = _mm256_unpackhi_epi32(desc2_3,
+ desc0_1);
+
+ /**
+ * take the two sets of status bits and merge to one
+ * After merge, the packets status flags are in the
+ * order (hi->lo): [1, 3, 5, 7, 0, 2, 4, 6]
+ */
+ __m256i status0_7 = _mm256_unpacklo_epi64(status4_7,
+ status0_3);
+
+ /* now do flag manipulation */
+
+ /* get only flag/error bits we want */
+ const __m256i flag_bits =
+ _mm256_and_si256(status0_7, flags_mask);
+ /* set vlan and rss flags */
+ const __m256i vlan_flags =
+ _mm256_shuffle_epi8(vlan_flags_shuf, flag_bits);
+ const __m256i rss_flags =
+ _mm256_shuffle_epi8(rss_flags_shuf,
+ _mm256_srli_epi32(flag_bits, 11));
+ /**
+ * l3_l4_error flags, shuffle, then shift to correct adjustment
+ * of flags in flags_shuf, and finally mask out extra bits
+ */
+ __m256i l3_l4_flags = _mm256_shuffle_epi8(l3_l4_flags_shuf,
+ _mm256_srli_epi32(flag_bits, 22));
+ l3_l4_flags = _mm256_slli_epi32(l3_l4_flags, 1);
+ l3_l4_flags = _mm256_and_si256(l3_l4_flags, cksum_mask);
+
+ /* merge flags */
+ const __m256i mbuf_flags = _mm256_or_si256(l3_l4_flags,
+ _mm256_or_si256(rss_flags, vlan_flags));
+ /**
+ * At this point, we have the 8 sets of flags in the low 16-bits
+ * of each 32-bit value in vlan0.
+ * We want to extract these, and merge them with the mbuf init
+ * data so we can do a single write to the mbuf to set the flags
+ * and all the other initialization fields. Extracting the
+ * appropriate flags means that we have to do a shift and blend
+ * for each mbuf before we do the write. However, we can also
+ * add in the previously computed rx_descriptor fields to
+ * make a single 256-bit write per mbuf
+ */
+ /* check the structure matches expectations */
+ RTE_BUILD_BUG_ON(offsetof(struct rte_mbuf, ol_flags) !=
+ offsetof(struct rte_mbuf, rearm_data) + 8);
+ RTE_BUILD_BUG_ON(offsetof(struct rte_mbuf, rearm_data) !=
+ RTE_ALIGN(offsetof(struct rte_mbuf,
+ rearm_data),
+ 16));
+ /* build up data and do writes */
+ __m256i rearm0, rearm1, rearm2, rearm3, rearm4, rearm5,
+ rearm6, rearm7;
+ rearm6 = _mm256_blend_epi32(mbuf_init,
+ _mm256_slli_si256(mbuf_flags, 8),
+ 0x04);
+ rearm4 = _mm256_blend_epi32(mbuf_init,
+ _mm256_slli_si256(mbuf_flags, 4),
+ 0x04);
+ rearm2 = _mm256_blend_epi32(mbuf_init, mbuf_flags, 0x04);
+ rearm0 = _mm256_blend_epi32(mbuf_init,
+ _mm256_srli_si256(mbuf_flags, 4),
+ 0x04);
+ /* permute to add in the rx_descriptor e.g. rss fields */
+ rearm6 = _mm256_permute2f128_si256(rearm6, mb6_7, 0x20);
+ rearm4 = _mm256_permute2f128_si256(rearm4, mb4_5, 0x20);
+ rearm2 = _mm256_permute2f128_si256(rearm2, mb2_3, 0x20);
+ rearm0 = _mm256_permute2f128_si256(rearm0, mb0_1, 0x20);
+ /* write to mbuf */
+ _mm256_storeu_si256((__m256i *)&rx_pkts[i + 6]->rearm_data,
+ rearm6);
+ _mm256_storeu_si256((__m256i *)&rx_pkts[i + 4]->rearm_data,
+ rearm4);
+ _mm256_storeu_si256((__m256i *)&rx_pkts[i + 2]->rearm_data,
+ rearm2);
+ _mm256_storeu_si256((__m256i *)&rx_pkts[i + 0]->rearm_data,
+ rearm0);
+
+ /* repeat for the odd mbufs */
+ const __m256i odd_flags =
+ _mm256_castsi128_si256
+ (_mm256_extracti128_si256(mbuf_flags, 1));
+ rearm7 = _mm256_blend_epi32(mbuf_init,
+ _mm256_slli_si256(odd_flags, 8),
+ 0x04);
+ rearm5 = _mm256_blend_epi32(mbuf_init,
+ _mm256_slli_si256(odd_flags, 4),
+ 0x04);
+ rearm3 = _mm256_blend_epi32(mbuf_init, odd_flags, 0x04);
+ rearm1 = _mm256_blend_epi32(mbuf_init,
+ _mm256_srli_si256(odd_flags, 4),
+ 0x04);
+ /* since odd mbufs are already in hi 128-bits use blend */
+ rearm7 = _mm256_blend_epi32(rearm7, mb6_7, 0xF0);
+ rearm5 = _mm256_blend_epi32(rearm5, mb4_5, 0xF0);
+ rearm3 = _mm256_blend_epi32(rearm3, mb2_3, 0xF0);
+ rearm1 = _mm256_blend_epi32(rearm1, mb0_1, 0xF0);
+ /* again write to mbufs */
+ _mm256_storeu_si256((__m256i *)&rx_pkts[i + 7]->rearm_data,
+ rearm7);
+ _mm256_storeu_si256((__m256i *)&rx_pkts[i + 5]->rearm_data,
+ rearm5);
+ _mm256_storeu_si256((__m256i *)&rx_pkts[i + 3]->rearm_data,
+ rearm3);
+ _mm256_storeu_si256((__m256i *)&rx_pkts[i + 1]->rearm_data,
+ rearm1);
+
+ /* extract and record EOP bit */
+ if (split_packet) {
+ const __m128i eop_mask =
+ _mm_set1_epi16(1 << ICE_RX_DESC_STATUS_EOF_S);
+ const __m256i eop_bits256 = _mm256_and_si256(status0_7,
+ eop_check);
+ /* pack status bits into a single 128-bit register */
+ const __m128i eop_bits =
+ _mm_packus_epi32
+ (_mm256_castsi256_si128(eop_bits256),
+ _mm256_extractf128_si256(eop_bits256,
+ 1));
+ /**
+ * flip bits, and mask out the EOP bit, which is now
+ * a split-packet bit i.e. !EOP, rather than EOP one.
+ */
+ __m128i split_bits = _mm_andnot_si128(eop_bits,
+ eop_mask);
+ /**
+ * eop bits are out of order, so we need to shuffle them
+ * back into order again. In doing so, only use low 8
+ * bits, which acts like another pack instruction
+ * The original order is (hi->lo): 1,3,5,7,0,2,4,6
+ * [Since we use epi8, the 16-bit positions are
+ * multiplied by 2 in the eop_shuffle value.]
+ */
+ __m128i eop_shuffle =
+ _mm_set_epi8(/* zero hi 64b */
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ /* move values to lo 64b */
+ 8, 0, 10, 2,
+ 12, 4, 14, 6);
+ split_bits = _mm_shuffle_epi8(split_bits, eop_shuffle);
+ *(uint64_t *)split_packet =
+ _mm_cvtsi128_si64(split_bits);
+ split_packet += ICE_DESCS_PER_LOOP_AVX;
+ }
+
+ /* perform dd_check */
+ status0_7 = _mm256_and_si256(status0_7, dd_check);
+ status0_7 = _mm256_packs_epi32(status0_7,
+ _mm256_setzero_si256());
+
+ uint64_t burst = __builtin_popcountll
+ (_mm_cvtsi128_si64
+ (_mm256_extracti128_si256
+ (status0_7, 1)));
+ burst += __builtin_popcountll
+ (_mm_cvtsi128_si64
+ (_mm256_castsi256_si128(status0_7)));
+ received += burst;
+ if (burst != ICE_DESCS_PER_LOOP_AVX)
+ break;
+ }
+
+ /* update tail pointers */
+ rxq->rx_tail += received;
+ rxq->rx_tail &= (rxq->nb_rx_desc - 1);
+ if ((rxq->rx_tail & 1) == 1 && received > 1) { /* keep avx2 aligned */
+ rxq->rx_tail--;
+ received--;
+ }
+ rxq->rxrearm_nb += received;
+ return received;
+}
+
+/**
+ * Notice:
+ * - nb_pkts < ICE_DESCS_PER_LOOP, just return no packet
+ */
+uint16_t
+ice_recv_pkts_vec_avx2(void *rx_queue, struct rte_mbuf **rx_pkts,
+ uint16_t nb_pkts)
+{
+ return _ice_recv_raw_pkts_vec_avx2(rx_queue, rx_pkts, nb_pkts, NULL);
+}
diff --git a/drivers/net/ice/meson.build b/drivers/net/ice/meson.build
index 469264d..2bec688 100644
--- a/drivers/net/ice/meson.build
+++ b/drivers/net/ice/meson.build
@@ -14,4 +14,19 @@ includes += include_directories('base')
if arch_subdir == 'x86'
sources += files('ice_rxtx_vec_sse.c')
+
+ # compile AVX2 version if either:
+ # a. we have AVX supported in minimum instruction set baseline
+ # b. it's not minimum instruction set, but supported by compiler
+ if dpdk_conf.has('RTE_MACHINE_CPUFLAG_AVX2')
+ sources += files('ice_rxtx_vec_avx2.c')
+ elif cc.has_argument('-mavx2')
+ ice_avx2_lib = static_library('ice_avx2_lib',
+ 'ice_rxtx_vec_avx2.c',
+ dependencies: [static_rte_ethdev,
+ static_rte_kvargs, static_rte_hash],
+ include_directories: includes,
+ c_args: [cflags, '-mavx2'])
+ objs += ice_avx2_lib.extract_objects('ice_rxtx_vec_avx2.c')
+ endif
endif
--
1.9.3
next prev parent reply other threads:[~2019-03-25 6:02 UTC|newest]
Thread overview: 219+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-28 7:48 [dpdk-dev] [PATCH 0/8] Support vector instructions on ICE Wenzhuo Lu
2019-02-28 7:48 ` [dpdk-dev] [PATCH 1/8] net/ice: fix TX function setting Wenzhuo Lu
2019-02-28 7:48 ` [dpdk-dev] [PATCH 2/8] net/ice: add pointer for queue buffer release Wenzhuo Lu
2019-02-28 7:48 ` [dpdk-dev] [PATCH 3/8] net/ice: support RX SSE vector Wenzhuo Lu
2019-03-01 3:44 ` Zhang, Qi Z
2019-03-04 1:27 ` Lu, Wenzhuo
2019-02-28 7:48 ` [dpdk-dev] [PATCH 4/8] net/ice: support RX scatter " Wenzhuo Lu
2019-02-28 7:48 ` [dpdk-dev] [PATCH 5/8] net/ice: support TX " Wenzhuo Lu
2019-02-28 7:48 ` [dpdk-dev] [PATCH 6/8] net/ice: support RX AVX2 vector Wenzhuo Lu
2019-02-28 7:48 ` [dpdk-dev] [PATCH 7/8] net/ice: support RX scatter " Wenzhuo Lu
2019-02-28 7:48 ` [dpdk-dev] [PATCH 8/8] net/ice: support TX " Wenzhuo Lu
2019-03-01 3:41 ` [dpdk-dev] [PATCH 0/8] Support vector instructions on ICE Zhang, Qi Z
2019-03-04 1:24 ` Lu, Wenzhuo
2019-03-04 6:53 ` [dpdk-dev] [PATCH v2 " Wenzhuo Lu
2019-03-04 6:53 ` [dpdk-dev] [PATCH v2 1/8] net/ice: fix Tx function setting Wenzhuo Lu
2019-03-04 6:53 ` [dpdk-dev] [PATCH v2 2/8] net/ice: add pointer for queue buffer release Wenzhuo Lu
2019-03-04 6:53 ` [dpdk-dev] [PATCH v2 3/8] net/ice: support vector SSE in RX Wenzhuo Lu
2019-03-11 3:26 ` Zhang, Qi Z
2019-03-15 1:50 ` Lu, Wenzhuo
2019-03-15 1:50 ` Lu, Wenzhuo
2019-03-04 6:53 ` [dpdk-dev] [PATCH v2 4/8] net/ice: support Rx scatter SSE vector Wenzhuo Lu
2019-03-04 6:53 ` [dpdk-dev] [PATCH v2 5/8] net/ice: support Tx " Wenzhuo Lu
2019-03-04 6:53 ` [dpdk-dev] [PATCH v2 6/8] net/ice: support Rx AVX2 vector Wenzhuo Lu
2019-03-04 6:53 ` [dpdk-dev] [PATCH v2 7/8] net/ice: support Rx scatter " Wenzhuo Lu
2019-03-04 6:53 ` [dpdk-dev] [PATCH v2 8/8] net/ice: support vector AVX2 in TX Wenzhuo Lu
2019-03-15 6:22 ` [dpdk-dev] [PATCH v3 0/8] Support vector instructions on ICE Wenzhuo Lu
2019-03-15 6:22 ` Wenzhuo Lu
2019-03-15 6:22 ` [dpdk-dev] [PATCH v3 1/8] net/ice: fix Tx function setting Wenzhuo Lu
2019-03-15 6:22 ` Wenzhuo Lu
2019-03-15 17:52 ` Ferruh Yigit
2019-03-15 17:52 ` Ferruh Yigit
2019-03-18 1:08 ` Lu, Wenzhuo
2019-03-18 1:08 ` Lu, Wenzhuo
2019-03-20 17:22 ` Ferruh Yigit
2019-03-20 17:22 ` Ferruh Yigit
2019-03-21 2:29 ` Lu, Wenzhuo
2019-03-21 2:29 ` Lu, Wenzhuo
2019-03-15 6:22 ` [dpdk-dev] [PATCH v3 2/8] net/ice: add pointer for queue buffer release Wenzhuo Lu
2019-03-15 6:22 ` Wenzhuo Lu
2019-03-15 17:52 ` Ferruh Yigit
2019-03-15 17:52 ` Ferruh Yigit
2019-03-18 1:15 ` Lu, Wenzhuo
2019-03-18 1:15 ` Lu, Wenzhuo
2019-03-15 6:22 ` [dpdk-dev] [PATCH v3 3/8] net/ice: support vector SSE in RX Wenzhuo Lu
2019-03-15 6:22 ` Wenzhuo Lu
2019-03-15 17:53 ` Ferruh Yigit
2019-03-15 17:53 ` Ferruh Yigit
2019-03-18 1:22 ` Lu, Wenzhuo
2019-03-18 1:22 ` Lu, Wenzhuo
2019-03-20 17:35 ` Ferruh Yigit
2019-03-20 17:35 ` Ferruh Yigit
2019-03-21 2:48 ` Lu, Wenzhuo
2019-03-21 2:48 ` Lu, Wenzhuo
2019-03-15 6:22 ` [dpdk-dev] [PATCH v3 4/8] net/ice: support Rx scatter SSE vector Wenzhuo Lu
2019-03-15 6:22 ` Wenzhuo Lu
2019-03-15 6:22 ` [dpdk-dev] [PATCH v3 5/8] net/ice: support Tx " Wenzhuo Lu
2019-03-15 6:22 ` Wenzhuo Lu
2019-03-15 6:22 ` [dpdk-dev] [PATCH v3 6/8] net/ice: support Rx AVX2 vector Wenzhuo Lu
2019-03-15 6:22 ` Wenzhuo Lu
2019-03-15 17:54 ` Ferruh Yigit
2019-03-15 17:54 ` Ferruh Yigit
2019-03-18 1:37 ` Lu, Wenzhuo
2019-03-18 1:37 ` Lu, Wenzhuo
2019-03-20 17:37 ` Ferruh Yigit
2019-03-20 17:37 ` Ferruh Yigit
2019-03-21 2:31 ` Lu, Wenzhuo
2019-03-21 2:31 ` Lu, Wenzhuo
2019-03-15 6:22 ` [dpdk-dev] [PATCH v3 7/8] net/ice: support Rx scatter " Wenzhuo Lu
2019-03-15 6:22 ` Wenzhuo Lu
2019-03-15 6:22 ` [dpdk-dev] [PATCH v3 8/8] net/ice: support vector AVX2 in TX Wenzhuo Lu
2019-03-15 6:22 ` Wenzhuo Lu
2019-03-15 17:54 ` Ferruh Yigit
2019-03-15 17:54 ` Ferruh Yigit
2019-03-18 1:38 ` Lu, Wenzhuo
2019-03-18 1:38 ` Lu, Wenzhuo
2019-03-15 8:08 ` [dpdk-dev] [PATCH v3 0/8] Support vector instructions on ICE Zhang, Qi Z
2019-03-15 8:08 ` Zhang, Qi Z
2019-03-21 6:26 ` [dpdk-dev] [PATCH v4 " Wenzhuo Lu
2019-03-21 6:26 ` Wenzhuo Lu
2019-03-21 6:26 ` [dpdk-dev] [PATCH v4 1/8] net/ice: fix Tx function setting Wenzhuo Lu
2019-03-21 6:26 ` Wenzhuo Lu
2019-03-22 8:46 ` Maxime Coquelin
2019-03-22 8:46 ` Maxime Coquelin
2019-03-22 9:01 ` Maxime Coquelin
2019-03-22 9:01 ` Maxime Coquelin
2019-03-21 6:26 ` [dpdk-dev] [PATCH v4 2/8] net/ice: add pointer for queue buffer release Wenzhuo Lu
2019-03-21 6:26 ` Wenzhuo Lu
2019-03-22 8:59 ` Maxime Coquelin
2019-03-22 8:59 ` Maxime Coquelin
2019-03-21 6:26 ` [dpdk-dev] [PATCH v4 3/8] net/ice: support vector SSE in RX Wenzhuo Lu
2019-03-21 6:26 ` Wenzhuo Lu
2019-03-21 19:02 ` Ferruh Yigit
2019-03-21 19:02 ` Ferruh Yigit
2019-03-22 1:46 ` Lu, Wenzhuo
2019-03-22 1:46 ` Lu, Wenzhuo
2019-03-21 6:26 ` [dpdk-dev] [PATCH v4 4/8] net/ice: support Rx scatter SSE vector Wenzhuo Lu
2019-03-21 6:26 ` Wenzhuo Lu
2019-03-21 6:26 ` [dpdk-dev] [PATCH v4 5/8] net/ice: support Tx " Wenzhuo Lu
2019-03-21 6:26 ` Wenzhuo Lu
2019-03-21 6:26 ` [dpdk-dev] [PATCH v4 6/8] net/ice: support Rx AVX2 vector Wenzhuo Lu
2019-03-21 6:26 ` Wenzhuo Lu
2019-03-21 6:26 ` [dpdk-dev] [PATCH v4 7/8] net/ice: support Rx scatter " Wenzhuo Lu
2019-03-21 6:26 ` Wenzhuo Lu
2019-03-21 6:26 ` [dpdk-dev] [PATCH v4 8/8] net/ice: support vector AVX2 in TX Wenzhuo Lu
2019-03-21 6:26 ` Wenzhuo Lu
2019-03-21 19:20 ` Ferruh Yigit
2019-03-21 19:20 ` Ferruh Yigit
2019-03-22 1:45 ` Lu, Wenzhuo
2019-03-22 1:45 ` Lu, Wenzhuo
2019-03-22 2:58 ` [dpdk-dev] [PATCH v5 0/8] Support vector instructions on ICE Wenzhuo Lu
2019-03-22 2:58 ` Wenzhuo Lu
2019-03-22 2:58 ` [dpdk-dev] [PATCH v5 1/8] net/ice: fix Tx function setting Wenzhuo Lu
2019-03-22 2:58 ` Wenzhuo Lu
2019-03-22 2:58 ` [dpdk-dev] [PATCH v5 2/8] net/ice: add pointer for queue buffer release Wenzhuo Lu
2019-03-22 2:58 ` Wenzhuo Lu
2019-03-22 2:58 ` [dpdk-dev] [PATCH v5 3/8] net/ice: support vector SSE in RX Wenzhuo Lu
2019-03-22 2:58 ` Wenzhuo Lu
2019-03-22 9:42 ` Maxime Coquelin
2019-03-22 9:42 ` Maxime Coquelin
2019-03-25 1:56 ` Lu, Wenzhuo
2019-03-25 1:56 ` Lu, Wenzhuo
2019-03-22 2:58 ` [dpdk-dev] [PATCH v5 4/8] net/ice: support Rx scatter SSE vector Wenzhuo Lu
2019-03-22 2:58 ` Wenzhuo Lu
2019-03-22 2:58 ` [dpdk-dev] [PATCH v5 5/8] net/ice: support Tx " Wenzhuo Lu
2019-03-22 2:58 ` Wenzhuo Lu
2019-03-22 9:58 ` Maxime Coquelin
2019-03-22 9:58 ` Maxime Coquelin
2019-03-25 2:02 ` Lu, Wenzhuo
2019-03-25 2:02 ` Lu, Wenzhuo
2019-03-22 2:58 ` [dpdk-dev] [PATCH v5 6/8] net/ice: support Rx AVX2 vector Wenzhuo Lu
2019-03-22 2:58 ` Wenzhuo Lu
2019-03-22 10:12 ` Maxime Coquelin
2019-03-22 10:12 ` Maxime Coquelin
2019-03-25 2:22 ` Lu, Wenzhuo
2019-03-25 2:22 ` Lu, Wenzhuo
2019-03-25 8:26 ` Maxime Coquelin
2019-03-25 8:26 ` Maxime Coquelin
2019-03-26 1:00 ` Lu, Wenzhuo
2019-03-26 1:00 ` Lu, Wenzhuo
2019-03-26 9:28 ` Maxime Coquelin
2019-03-26 9:28 ` Maxime Coquelin
2019-03-27 0:56 ` Lu, Wenzhuo
2019-03-27 0:56 ` Lu, Wenzhuo
2019-03-27 7:50 ` Maxime Coquelin
2019-03-27 7:50 ` Maxime Coquelin
2019-03-28 1:56 ` Lu, Wenzhuo
2019-03-28 1:56 ` Lu, Wenzhuo
2019-03-22 2:58 ` [dpdk-dev] [PATCH v5 7/8] net/ice: support Rx scatter " Wenzhuo Lu
2019-03-22 2:58 ` Wenzhuo Lu
2019-03-22 2:58 ` [dpdk-dev] [PATCH v5 8/8] net/ice: support vector AVX2 in TX Wenzhuo Lu
2019-03-22 2:58 ` Wenzhuo Lu
2019-03-25 6:06 ` [dpdk-dev] [PATCH v6 0/8] Support vector instructions on ICE Wenzhuo Lu
2019-03-25 6:06 ` Wenzhuo Lu
2019-03-25 6:06 ` [dpdk-dev] [PATCH v6 1/8] net/ice: fix Tx function setting Wenzhuo Lu
2019-03-25 6:06 ` Wenzhuo Lu
2019-03-25 6:06 ` [dpdk-dev] [PATCH v6 2/8] net/ice: add pointer for queue buffer release Wenzhuo Lu
2019-03-25 6:06 ` Wenzhuo Lu
2019-03-25 13:23 ` Maxime Coquelin
2019-03-25 13:23 ` Maxime Coquelin
2019-03-26 1:15 ` Lu, Wenzhuo
2019-03-26 1:15 ` Lu, Wenzhuo
2019-03-25 6:06 ` [dpdk-dev] [PATCH v6 3/8] net/ice: support vector SSE in RX Wenzhuo Lu
2019-03-25 6:06 ` Wenzhuo Lu
2019-03-25 6:06 ` [dpdk-dev] [PATCH v6 4/8] net/ice: support Rx scatter SSE vector Wenzhuo Lu
2019-03-25 6:06 ` Wenzhuo Lu
2019-03-25 6:06 ` [dpdk-dev] [PATCH v6 5/8] net/ice: support Tx " Wenzhuo Lu
2019-03-25 6:06 ` Wenzhuo Lu
2019-03-25 6:06 ` Wenzhuo Lu [this message]
2019-03-25 6:06 ` [dpdk-dev] [PATCH v6 6/8] net/ice: support Rx AVX2 vector Wenzhuo Lu
2019-03-25 6:06 ` [dpdk-dev] [PATCH v6 7/8] net/ice: support Rx scatter " Wenzhuo Lu
2019-03-25 6:06 ` Wenzhuo Lu
2019-03-25 6:06 ` [dpdk-dev] [PATCH v6 8/8] net/ice: support vector AVX2 in TX Wenzhuo Lu
2019-03-25 6:06 ` Wenzhuo Lu
2019-03-25 7:56 ` [dpdk-dev] [PATCH v6 0/8] Support vector instructions on ICE Zhang, Qi Z
2019-03-25 7:56 ` Zhang, Qi Z
2019-03-26 6:16 ` [dpdk-dev] [PATCH v7 " Wenzhuo Lu
2019-03-26 6:16 ` Wenzhuo Lu
2019-03-26 6:16 ` [dpdk-dev] [PATCH v7 1/8] net/ice: fix Tx function setting Wenzhuo Lu
2019-03-26 6:16 ` Wenzhuo Lu
2019-03-26 6:16 ` [dpdk-dev] [PATCH v7 2/8] net/ice: add pointer for queue buffer release Wenzhuo Lu
2019-03-26 6:16 ` Wenzhuo Lu
2019-03-26 6:16 ` [dpdk-dev] [PATCH v7 3/8] net/ice: support vector SSE in RX Wenzhuo Lu
2019-03-26 6:16 ` Wenzhuo Lu
2019-03-26 6:16 ` [dpdk-dev] [PATCH v7 4/8] net/ice: support Rx scatter SSE vector Wenzhuo Lu
2019-03-26 6:16 ` Wenzhuo Lu
2019-03-26 6:16 ` [dpdk-dev] [PATCH v7 5/8] net/ice: support Tx " Wenzhuo Lu
2019-03-26 6:16 ` Wenzhuo Lu
2019-03-26 6:16 ` [dpdk-dev] [PATCH v7 6/8] net/ice: support Rx AVX2 vector Wenzhuo Lu
2019-03-26 6:16 ` Wenzhuo Lu
2019-03-26 6:16 ` [dpdk-dev] [PATCH v7 7/8] net/ice: support Rx scatter " Wenzhuo Lu
2019-03-26 6:16 ` Wenzhuo Lu
2019-03-26 6:16 ` [dpdk-dev] [PATCH v7 8/8] net/ice: support vector AVX2 in TX Wenzhuo Lu
2019-03-26 6:16 ` Wenzhuo Lu
2019-03-26 9:50 ` [dpdk-dev] [PATCH v7 0/8] Support vector instructions on ICE Ferruh Yigit
2019-03-26 9:50 ` Ferruh Yigit
2019-03-31 15:52 ` Thomas Monjalon
2019-03-31 15:52 ` Thomas Monjalon
2019-04-01 5:46 ` Lu, Wenzhuo
2019-04-01 5:46 ` Lu, Wenzhuo
2019-04-01 12:51 ` Ferruh Yigit
2019-04-01 12:51 ` Ferruh Yigit
2019-04-01 13:27 ` Thomas Monjalon
2019-04-01 13:27 ` Thomas Monjalon
2019-04-01 15:12 ` Ferruh Yigit
2019-04-01 15:12 ` Ferruh Yigit
2019-04-01 15:14 ` Thomas Monjalon
2019-04-01 15:14 ` Thomas Monjalon
2019-04-02 1:01 ` Lu, Wenzhuo
2019-04-02 1:01 ` Lu, Wenzhuo
2019-04-02 7:12 ` Thomas Monjalon
2019-04-02 7:12 ` Thomas Monjalon
2019-04-01 14:39 ` Bruce Richardson
2019-04-01 14:39 ` Bruce Richardson
2019-04-01 14:56 ` Ferruh Yigit
2019-04-01 14:56 ` Ferruh Yigit
2019-04-01 15:09 ` Ferruh Yigit
2019-04-01 15:09 ` Ferruh Yigit
2019-04-01 15:13 ` Thomas Monjalon
2019-04-01 15:13 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1553493995-29803-7-git-send-email-wenzhuo.lu@intel.com \
--to=wenzhuo.lu@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).