From: Stephen Hemminger <stephen@networkplumber.org>
To: dev@dpdk.org
Cc: Stephen Hemminger <stephen@networkplumber.org>
Subject: [dpdk-dev] [PATCH v4 2/3] examples/l3fwd: use reserved IPv4/IPv6 addresses
Date: Tue, 2 Apr 2019 13:39:06 -0700 [thread overview]
Message-ID: <20190402203907.28679-3-stephen@networkplumber.org> (raw)
Message-ID: <20190402203906.5C4guVE2ghYYqxoOJec0kMd9dlqU8roObioyTo9oIyo@z> (raw)
In-Reply-To: <20190402203907.28679-1-stephen@networkplumber.org>
The l3fwd example should use the IPv4 addresses defined in RFC5735 and
the IPv6 addresses defined in RFC5180 for the L3 forwarding example
Longest Prefix Match table.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
v4 - fix IPv6 /48 entries
examples/l3fwd/l3fwd_lpm.c | 34 ++++++++++++++++++----------------
1 file changed, 18 insertions(+), 16 deletions(-)
diff --git a/examples/l3fwd/l3fwd_lpm.c b/examples/l3fwd/l3fwd_lpm.c
index b1dc195ad8cb..3191fc4c2639 100644
--- a/examples/l3fwd/l3fwd_lpm.c
+++ b/examples/l3fwd/l3fwd_lpm.c
@@ -39,26 +39,28 @@ struct ipv6_l3fwd_lpm_route {
uint8_t if_out;
};
+/* 192.18.0.0/16 are set aside for RFC2544 benchmarking. */
static struct ipv4_l3fwd_lpm_route ipv4_l3fwd_lpm_route_array[] = {
- {IPv4(1, 1, 1, 0), 24, 0},
- {IPv4(2, 1, 1, 0), 24, 1},
- {IPv4(3, 1, 1, 0), 24, 2},
- {IPv4(4, 1, 1, 0), 24, 3},
- {IPv4(5, 1, 1, 0), 24, 4},
- {IPv4(6, 1, 1, 0), 24, 5},
- {IPv4(7, 1, 1, 0), 24, 6},
- {IPv4(8, 1, 1, 0), 24, 7},
+ {IPv4(192, 18, 0, 0), 24, 0},
+ {IPv4(192, 18, 1, 0), 24, 1},
+ {IPv4(192, 18, 2, 0), 24, 2},
+ {IPv4(192, 18, 3, 0), 24, 3},
+ {IPv4(192, 18, 4, 0), 24, 4},
+ {IPv4(192, 18, 5, 0), 24, 5},
+ {IPv4(192, 18, 6, 0), 24, 6},
+ {IPv4(192, 18, 7, 0), 24, 7},
};
+/* 2001:0200::/48 is IANA reserved range for IPv6 benchmarking (RFC5180) */
static struct ipv6_l3fwd_lpm_route ipv6_l3fwd_lpm_route_array[] = {
- {{1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1}, 48, 0},
- {{2, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1}, 48, 1},
- {{3, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1}, 48, 2},
- {{4, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1}, 48, 3},
- {{5, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1}, 48, 4},
- {{6, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1}, 48, 5},
- {{7, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1}, 48, 6},
- {{8, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1}, 48, 7},
+ {{32, 1, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, 48, 0},
+ {{32, 1, 2, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0}, 48, 1},
+ {{32, 1, 2, 0, 0, 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, 0}, 48, 2},
+ {{32, 1, 2, 0, 0, 0, 0, 0, 0, 3, 0, 0, 0, 0, 0, 0}, 48, 3},
+ {{32, 1, 2, 0, 0, 0, 0, 0, 0, 4, 0, 0, 0, 0, 0, 0}, 48, 4},
+ {{32, 1, 2, 0, 0, 0, 0, 0, 0, 5, 0, 0, 0, 0, 0, 0}, 48, 5},
+ {{32, 1, 2, 0, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 0}, 48, 6},
+ {{32, 1, 2, 0, 0, 0, 0, 0, 0, 7, 0, 0, 0, 0, 0, 0}, 48, 7},
};
#define IPV4_L3FWD_LPM_NUM_ROUTES \
--
2.17.1
next prev parent reply other threads:[~2019-04-02 20:39 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-18 21:35 [dpdk-dev] [PATCH v3 0/3] use RFC addresses for testing Stephen Hemminger
2018-06-18 21:35 ` [dpdk-dev] [PATCH v3 1/3] testpmd: add ability to set tx IP and UDP parameters Stephen Hemminger
2018-06-22 9:12 ` Iremonger, Bernard
2018-10-29 2:25 ` Thomas Monjalon
2018-06-26 11:47 ` Shahaf Shuler
2018-06-26 11:51 ` Shahaf Shuler
2019-04-02 20:39 ` [dpdk-dev] [PATCH v4 0/3] use RFC addresses in test applications Stephen Hemminger
2019-04-02 20:39 ` Stephen Hemminger
2019-04-02 20:39 ` [dpdk-dev] [PATCH v4 1/3] app/testpmd: add ability to set Tx IP and UDP parameters Stephen Hemminger
2019-04-02 20:39 ` Stephen Hemminger
2019-04-08 12:51 ` Iremonger, Bernard
2019-04-08 12:51 ` Iremonger, Bernard
2019-04-02 20:39 ` Stephen Hemminger [this message]
2019-04-02 20:39 ` [dpdk-dev] [PATCH v4 2/3] examples/l3fwd: use reserved IPv4/IPv6 addresses Stephen Hemminger
2019-04-08 13:07 ` Iremonger, Bernard
2019-04-08 13:07 ` Iremonger, Bernard
2019-04-09 17:14 ` Stephen Hemminger
2019-04-09 17:14 ` Stephen Hemminger
2019-04-02 20:39 ` [dpdk-dev] [PATCH v4 3/3] examples/l3fwd: format the IP addresses for printing Stephen Hemminger
2019-04-02 20:39 ` Stephen Hemminger
2019-04-08 13:14 ` Iremonger, Bernard
2019-04-08 13:14 ` Iremonger, Bernard
2019-04-09 18:20 ` [dpdk-dev] [PATCH v5 0/3] use RFC addresses in test applications Stephen Hemminger
2019-04-09 18:20 ` Stephen Hemminger
2019-04-09 18:20 ` [dpdk-dev] [PATCH v5 1/3] app/testpmd: add ability to set Tx IP and UDP parameters Stephen Hemminger
2019-04-09 18:20 ` Stephen Hemminger
2019-04-10 10:07 ` Iremonger, Bernard
2019-04-10 10:07 ` Iremonger, Bernard
2019-04-09 18:20 ` [dpdk-dev] [PATCH v5 2/3] examples/l3fwd: use reserved IPv4/IPv6 addresses Stephen Hemminger
2019-04-09 18:20 ` Stephen Hemminger
2019-04-10 8:56 ` Iremonger, Bernard
2019-04-10 8:56 ` Iremonger, Bernard
2019-04-09 18:20 ` [dpdk-dev] [PATCH v5 3/3] examples/l3fwd: format the IP addresses for printing Stephen Hemminger
2019-04-09 18:20 ` Stephen Hemminger
2019-04-10 17:41 ` [dpdk-dev] [PATCH v6 0/3] use IPv4 addresses reserved for testing Stephen Hemminger
2019-04-10 17:41 ` Stephen Hemminger
2019-04-10 17:41 ` [dpdk-dev] [PATCH v6 1/3] app/testpmd: add ability to set Tx IP and UDP parameters Stephen Hemminger
2019-04-10 17:41 ` Stephen Hemminger
2019-04-11 9:02 ` Iremonger, Bernard
2019-04-11 9:02 ` Iremonger, Bernard
2019-04-10 17:41 ` [dpdk-dev] [PATCH v6 2/3] examples/l3fwd: use reserved IPv4/IPv6 addresses Stephen Hemminger
2019-04-10 17:41 ` Stephen Hemminger
2019-04-11 9:08 ` Iremonger, Bernard
2019-04-11 9:08 ` Iremonger, Bernard
2019-04-10 17:41 ` [dpdk-dev] [PATCH v6 3/3] examples/l3fwd: format the IP addresses for printing Stephen Hemminger
2019-04-10 17:41 ` Stephen Hemminger
2019-04-21 21:55 ` [dpdk-dev] [PATCH v6 0/3] use IPv4 addresses reserved for testing Thomas Monjalon
2019-04-21 21:55 ` Thomas Monjalon
2018-06-18 21:35 ` [dpdk-dev] [PATCH v3 2/3] examples/l3fwd: use reserved IPv4/IPv6 addresses Stephen Hemminger
2018-06-22 9:19 ` Iremonger, Bernard
2018-06-18 21:35 ` [dpdk-dev] [PATCH v3 3/3] examples/l3fwd: format the IP addresses for printing Stephen Hemminger
2018-06-22 10:23 ` Iremonger, Bernard
2018-06-22 13:44 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190402203907.28679-3-stephen@networkplumber.org \
--to=stephen@networkplumber.org \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).