From: Stephen Hemminger <stephen@networkplumber.org>
To: dev@dpdk.org
Cc: Stephen Hemminger <stephen@networkplumber.org>
Subject: [dpdk-dev] [PATCH v3] eal: rename state values in rte_lcore_state
Date: Tue, 2 Apr 2019 13:53:35 -0700 [thread overview]
Message-ID: <20190402205335.13745-1-stephen@networkplumber.org> (raw)
Message-ID: <20190402205335.XYe8lZCzoHz-7Nekc6eZyevGByeFLozX6p8iIEWiqY8@z> (raw)
In-Reply-To: <20190402155722.21400-1-stephen@networkplumber.org>
C language does not really treat enum's as first class symbols.
The values in an enum live in a global namespace. That means if
DPDK defines "RUNNING" it can't be used by another enum in an
application using DPDK.
To solve this add a prefix "RTE_LCORE_" to the enum values, and
make them grammatically consistent.
Also, simplify the inline thread_is_running() which is copied
in softnic and ip_pipeline.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
v3 - fix BSD and bond driver usage of state
drivers/event/octeontx/ssovf_evdev_selftest.c | 2 +-
drivers/event/sw/sw_evdev_selftest.c | 4 ++--
drivers/net/softnic/rte_eth_softnic_thread.c | 5 +----
examples/bond/main.c | 4 ++--
examples/ip_pipeline/thread.c | 5 +----
examples/l2fwd-keepalive/main.c | 2 +-
lib/librte_eal/common/eal_common_launch.c | 12 ++++++------
lib/librte_eal/common/include/rte_launch.h | 6 +++---
lib/librte_eal/common/rte_service.c | 2 +-
lib/librte_eal/freebsd/eal/eal.c | 2 +-
lib/librte_eal/freebsd/eal/eal_thread.c | 6 +++---
lib/librte_eal/linux/eal/eal.c | 2 +-
lib/librte_eal/linux/eal/eal_thread.c | 8 ++++----
13 files changed, 27 insertions(+), 33 deletions(-)
diff --git a/drivers/event/octeontx/ssovf_evdev_selftest.c b/drivers/event/octeontx/ssovf_evdev_selftest.c
index 239362fcf549..06370840ba36 100644
--- a/drivers/event/octeontx/ssovf_evdev_selftest.c
+++ b/drivers/event/octeontx/ssovf_evdev_selftest.c
@@ -577,7 +577,7 @@ wait_workers_to_join(int lcore, const rte_atomic32_t *count)
RTE_SET_USED(count);
print_cycles = cycles = rte_get_timer_cycles();
- while (rte_eal_get_lcore_state(lcore) != FINISHED) {
+ while (rte_eal_get_lcore_state(lcore) != RTE_LCORE_FINISHED) {
uint64_t new_cycles = rte_get_timer_cycles();
if (new_cycles - print_cycles > rte_get_timer_hz()) {
diff --git a/drivers/event/sw/sw_evdev_selftest.c b/drivers/event/sw/sw_evdev_selftest.c
index d00d5de613d7..9e16f7d3520f 100644
--- a/drivers/event/sw/sw_evdev_selftest.c
+++ b/drivers/event/sw/sw_evdev_selftest.c
@@ -3116,8 +3116,8 @@ worker_loopback(struct test *t, uint8_t disable_implicit_release)
rte_eal_remote_launch(worker_loopback_worker_fn, t, w_lcore);
print_cycles = cycles = rte_get_timer_cycles();
- while (rte_eal_get_lcore_state(p_lcore) != FINISHED ||
- rte_eal_get_lcore_state(w_lcore) != FINISHED) {
+ while (rte_eal_get_lcore_state(p_lcore) != RTE_LCORE_FINISHED ||
+ rte_eal_get_lcore_state(w_lcore) != RTE_LCORE_FINISHED) {
rte_service_run_iter_on_app_lcore(t->service_id, 1);
diff --git a/drivers/net/softnic/rte_eth_softnic_thread.c b/drivers/net/softnic/rte_eth_softnic_thread.c
index 57989a5aac54..dee3923101bc 100644
--- a/drivers/net/softnic/rte_eth_softnic_thread.c
+++ b/drivers/net/softnic/rte_eth_softnic_thread.c
@@ -118,10 +118,7 @@ thread_is_valid(struct pmd_internals *softnic, uint32_t thread_id)
static inline int
thread_is_running(uint32_t thread_id)
{
- enum rte_lcore_state_t thread_state;
-
- thread_state = rte_eal_get_lcore_state(thread_id);
- return (thread_state == RUNNING)? 1 : 0;
+ return rte_eal_get_lcore_state(thread_id) == RTE_LCORE_RUNNING;
}
static int32_t
diff --git a/examples/bond/main.c b/examples/bond/main.c
index ef86194fff4a..12123a4b16d8 100644
--- a/examples/bond/main.c
+++ b/examples/bond/main.c
@@ -527,7 +527,7 @@ static void cmd_start_parsed(__attribute__((unused)) void *parsed_result,
rte_spinlock_trylock(&global_flag_stru_p->lock);
if (global_flag_stru_p->LcoreMainIsRunning == 0) {
- if (lcore_config[global_flag_stru_p->LcoreMainCore].state != WAIT) {
+ if (lcore_config[global_flag_stru_p->LcoreMainCore].state != RTE_LCORE_WAIT) {
rte_spinlock_unlock(&global_flag_stru_p->lock);
return;
}
@@ -796,7 +796,7 @@ main(int argc, char *argv[])
/* check state of lcores */
RTE_LCORE_FOREACH_SLAVE(slave_core_id) {
- if (lcore_config[slave_core_id].state != WAIT)
+ if (lcore_config[slave_core_id].state != RTE_LCORE_WAIT)
return -EBUSY;
}
/* start lcore main on core != master_core - ARP response thread */
diff --git a/examples/ip_pipeline/thread.c b/examples/ip_pipeline/thread.c
index 272fbbeed1bc..3a62a0aee8bc 100644
--- a/examples/ip_pipeline/thread.c
+++ b/examples/ip_pipeline/thread.c
@@ -158,10 +158,7 @@ thread_init(void)
static inline int
thread_is_running(uint32_t thread_id)
{
- enum rte_lcore_state_t thread_state;
-
- thread_state = rte_eal_get_lcore_state(thread_id);
- return (thread_state == RUNNING) ? 1 : 0;
+ return rte_eal_get_lcore_state(thread_id) == RTE_LCORE_RUNNING;
}
/**
diff --git a/examples/l2fwd-keepalive/main.c b/examples/l2fwd-keepalive/main.c
index 0bf2b533648a..2e1edfa05937 100644
--- a/examples/l2fwd-keepalive/main.c
+++ b/examples/l2fwd-keepalive/main.c
@@ -502,7 +502,7 @@ dead_core(__rte_unused void *ptr_data, const int id_core)
if (terminate_signal_received)
return;
printf("Dead core %i - restarting..\n", id_core);
- if (rte_eal_get_lcore_state(id_core) == FINISHED) {
+ if (rte_eal_get_lcore_state(id_core) == RTE_LCORE_FINISHED) {
rte_eal_wait_lcore(id_core);
rte_eal_remote_launch(l2fwd_launch_one_lcore, NULL, id_core);
} else {
diff --git a/lib/librte_eal/common/eal_common_launch.c b/lib/librte_eal/common/eal_common_launch.c
index fe0ba3f0d617..74a3f1a28432 100644
--- a/lib/librte_eal/common/eal_common_launch.c
+++ b/lib/librte_eal/common/eal_common_launch.c
@@ -21,17 +21,17 @@
int
rte_eal_wait_lcore(unsigned slave_id)
{
- if (lcore_config[slave_id].state == WAIT)
+ if (lcore_config[slave_id].state == RTE_LCORE_WAITING)
return 0;
- while (lcore_config[slave_id].state != WAIT &&
- lcore_config[slave_id].state != FINISHED)
+ while (lcore_config[slave_id].state != RTE_LCORE_WAITING &&
+ lcore_config[slave_id].state != RTE_LCORE_FINISHED)
rte_pause();
rte_rmb();
/* we are in finished state, go to wait state */
- lcore_config[slave_id].state = WAIT;
+ lcore_config[slave_id].state = RTE_LCORE_WAITING;
return lcore_config[slave_id].ret;
}
@@ -49,7 +49,7 @@ rte_eal_mp_remote_launch(int (*f)(void *), void *arg,
/* check state of lcores */
RTE_LCORE_FOREACH_SLAVE(lcore_id) {
- if (lcore_config[lcore_id].state != WAIT)
+ if (lcore_config[lcore_id].state != RTE_LCORE_WAITING)
return -EBUSY;
}
@@ -60,7 +60,7 @@ rte_eal_mp_remote_launch(int (*f)(void *), void *arg,
if (call_master == CALL_MASTER) {
lcore_config[master].ret = f(arg);
- lcore_config[master].state = FINISHED;
+ lcore_config[master].state = RTE_LCORE_FINISHED;
}
return 0;
diff --git a/lib/librte_eal/common/include/rte_launch.h b/lib/librte_eal/common/include/rte_launch.h
index 06a671752ace..286ca31c98ab 100644
--- a/lib/librte_eal/common/include/rte_launch.h
+++ b/lib/librte_eal/common/include/rte_launch.h
@@ -19,9 +19,9 @@ extern "C" {
* State of an lcore.
*/
enum rte_lcore_state_t {
- WAIT, /**< waiting a new command */
- RUNNING, /**< executing command */
- FINISHED, /**< command executed */
+ RTE_LCORE_WAITING, /**< waiting a new command */
+ RTE_LCORE_RUNNING, /**< executing command */
+ RTE_LCORE_FINISHED, /**< command executed */
};
/**
diff --git a/lib/librte_eal/common/rte_service.c b/lib/librte_eal/common/rte_service.c
index 5f75e5a53fbf..8dd7586027ff 100644
--- a/lib/librte_eal/common/rte_service.c
+++ b/lib/librte_eal/common/rte_service.c
@@ -450,7 +450,7 @@ rte_service_runner_func(void *arg)
rte_smp_rmb();
}
- lcore_config[lcore].state = WAIT;
+ lcore_config[lcore].state = RTE_LCORE_WAITING;
return 0;
}
diff --git a/lib/librte_eal/freebsd/eal/eal.c b/lib/librte_eal/freebsd/eal/eal.c
index 790c6afa7050..aae4243486bd 100644
--- a/lib/librte_eal/freebsd/eal/eal.c
+++ b/lib/librte_eal/freebsd/eal/eal.c
@@ -784,7 +784,7 @@ rte_eal_init(int argc, char **argv)
if (pipe(lcore_config[i].pipe_slave2master) < 0)
rte_panic("Cannot create pipe\n");
- lcore_config[i].state = WAIT;
+ lcore_config[i].state = RTE_LCORE_WAIT;
/* create a thread for each lcore */
ret = pthread_create(&lcore_config[i].thread_id, NULL,
diff --git a/lib/librte_eal/freebsd/eal/eal_thread.c b/lib/librte_eal/freebsd/eal/eal_thread.c
index 309b5872666b..f25e84fa312b 100644
--- a/lib/librte_eal/freebsd/eal/eal_thread.c
+++ b/lib/librte_eal/freebsd/eal/eal_thread.c
@@ -41,7 +41,7 @@ rte_eal_remote_launch(int (*f)(void *), void *arg, unsigned slave_id)
int m2s = lcore_config[slave_id].pipe_master2slave[1];
int s2m = lcore_config[slave_id].pipe_slave2master[0];
- if (lcore_config[slave_id].state != WAIT)
+ if (lcore_config[slave_id].state != RTE_LCORE_WAITING)
return -EBUSY;
lcore_config[slave_id].f = f;
@@ -136,7 +136,7 @@ eal_thread_loop(__attribute__((unused)) void *arg)
if (n <= 0)
rte_panic("cannot read on configuration pipe\n");
- lcore_config[lcore_id].state = RUNNING;
+ lcore_config[lcore_id].state = RTE_LCORE_RUNNING;
/* send ack */
n = 0;
@@ -153,7 +153,7 @@ eal_thread_loop(__attribute__((unused)) void *arg)
ret = lcore_config[lcore_id].f(fct_arg);
lcore_config[lcore_id].ret = ret;
rte_wmb();
- lcore_config[lcore_id].state = FINISHED;
+ lcore_config[lcore_id].state = RTE_LCORE_FINISHED;
}
/* never reached */
diff --git a/lib/librte_eal/linux/eal/eal.c b/lib/librte_eal/linux/eal/eal.c
index 75ed0cf1029f..3fe25a1feb2f 100644
--- a/lib/librte_eal/linux/eal/eal.c
+++ b/lib/librte_eal/linux/eal/eal.c
@@ -1158,7 +1158,7 @@ rte_eal_init(int argc, char **argv)
if (pipe(lcore_config[i].pipe_slave2master) < 0)
rte_panic("Cannot create pipe\n");
- lcore_config[i].state = WAIT;
+ lcore_config[i].state = RTE_LCORE_WAITING;
/* create a thread for each lcore */
ret = pthread_create(&lcore_config[i].thread_id, NULL,
diff --git a/lib/librte_eal/linux/eal/eal_thread.c b/lib/librte_eal/linux/eal/eal_thread.c
index 379773b683e8..058692a45412 100644
--- a/lib/librte_eal/linux/eal/eal_thread.c
+++ b/lib/librte_eal/linux/eal/eal_thread.c
@@ -41,7 +41,7 @@ rte_eal_remote_launch(int (*f)(void *), void *arg, unsigned slave_id)
int m2s = lcore_config[slave_id].pipe_master2slave[1];
int s2m = lcore_config[slave_id].pipe_slave2master[0];
- if (lcore_config[slave_id].state != WAIT)
+ if (lcore_config[slave_id].state != RTE_LCORE_WAITING)
return -EBUSY;
lcore_config[slave_id].f = f;
@@ -136,7 +136,7 @@ eal_thread_loop(__attribute__((unused)) void *arg)
if (n <= 0)
rte_panic("cannot read on configuration pipe\n");
- lcore_config[lcore_id].state = RUNNING;
+ lcore_config[lcore_id].state = RTE_LCORE_RUNNING;
/* send ack */
n = 0;
@@ -158,9 +158,9 @@ eal_thread_loop(__attribute__((unused)) void *arg)
* state, because the application will not lcore_wait() for it.
*/
if (lcore_config[lcore_id].core_role == ROLE_SERVICE)
- lcore_config[lcore_id].state = WAIT;
+ lcore_config[lcore_id].state = RTE_LCORE_WAITING;
else
- lcore_config[lcore_id].state = FINISHED;
+ lcore_config[lcore_id].state = RTE_LCORE_FINISHED;
}
/* never reached */
--
2.17.1
next prev parent reply other threads:[~2019-04-02 20:53 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-26 19:25 [dpdk-dev] [RFC] " Stephen Hemminger
2019-03-26 19:25 ` Stephen Hemminger
2019-03-27 0:42 ` Thomas Monjalon
2019-03-27 0:42 ` Thomas Monjalon
2019-04-02 15:57 ` [dpdk-dev] [PATCH v2] " Stephen Hemminger
2019-04-02 15:57 ` Stephen Hemminger
2019-04-02 20:15 ` David Marchand
2019-04-02 20:15 ` David Marchand
2019-04-02 20:48 ` Stephen Hemminger
2019-04-02 20:48 ` Stephen Hemminger
2019-04-02 21:03 ` David Marchand
2019-04-02 21:03 ` David Marchand
2019-04-02 21:07 ` Stephen Hemminger
2019-04-02 21:07 ` Stephen Hemminger
2019-04-02 21:21 ` David Marchand
2019-04-02 21:21 ` David Marchand
2019-04-02 20:53 ` Stephen Hemminger [this message]
2019-04-02 20:53 ` [dpdk-dev] [PATCH v3] " Stephen Hemminger
2019-04-03 11:59 ` David Marchand
2019-04-03 11:59 ` David Marchand
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190402205335.13745-1-stephen@networkplumber.org \
--to=stephen@networkplumber.org \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).