From: "Iremonger, Bernard" <bernard.iremonger@intel.com>
To: Stephen Hemminger <stephen@networkplumber.org>,
"dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v4 2/3] examples/l3fwd: use reserved IPv4/IPv6 addresses
Date: Mon, 8 Apr 2019 13:07:33 +0000 [thread overview]
Message-ID: <8CEF83825BEC744B83065625E567D7C260D8555E@IRSMSX108.ger.corp.intel.com> (raw)
Message-ID: <20190408130733.3KuA1PXFUf0f7-gNtEUyWIc6sTeIByANQ1DJx5rzWVM@z> (raw)
In-Reply-To: <20190402203907.28679-3-stephen@networkplumber.org>
Hi Stephen,
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Stephen Hemminger
> Sent: Tuesday, April 2, 2019 9:39 PM
> To: dev@dpdk.org
> Cc: Stephen Hemminger <stephen@networkplumber.org>
> Subject: [dpdk-dev] [PATCH v4 2/3] examples/l3fwd: use reserved IPv4/IPv6
> addresses
>
> The l3fwd example should use the IPv4 addresses defined in RFC5735 and the
> IPv6 addresses defined in RFC5180 for the L3 forwarding example Longest Prefix
> Match table.
There should probably be a fixes line.
Also the commit line should have the "fix" keyword.
>
> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
> ---
> v4 - fix IPv6 /48 entries
>
> examples/l3fwd/l3fwd_lpm.c | 34 ++++++++++++++++++----------------
> 1 file changed, 18 insertions(+), 16 deletions(-)
>
> diff --git a/examples/l3fwd/l3fwd_lpm.c b/examples/l3fwd/l3fwd_lpm.c index
> b1dc195ad8cb..3191fc4c2639 100644
> --- a/examples/l3fwd/l3fwd_lpm.c
> +++ b/examples/l3fwd/l3fwd_lpm.c
> @@ -39,26 +39,28 @@ struct ipv6_l3fwd_lpm_route {
> uint8_t if_out;
> };
>
> +/* 192.18.0.0/16 are set aside for RFC2544 benchmarking. */
> static struct ipv4_l3fwd_lpm_route ipv4_l3fwd_lpm_route_array[] = {
> - {IPv4(1, 1, 1, 0), 24, 0},
> - {IPv4(2, 1, 1, 0), 24, 1},
> - {IPv4(3, 1, 1, 0), 24, 2},
> - {IPv4(4, 1, 1, 0), 24, 3},
> - {IPv4(5, 1, 1, 0), 24, 4},
> - {IPv4(6, 1, 1, 0), 24, 5},
> - {IPv4(7, 1, 1, 0), 24, 6},
> - {IPv4(8, 1, 1, 0), 24, 7},
> + {IPv4(192, 18, 0, 0), 24, 0},
> + {IPv4(192, 18, 1, 0), 24, 1},
> + {IPv4(192, 18, 2, 0), 24, 2},
> + {IPv4(192, 18, 3, 0), 24, 3},
> + {IPv4(192, 18, 4, 0), 24, 4},
> + {IPv4(192, 18, 5, 0), 24, 5},
> + {IPv4(192, 18, 6, 0), 24, 6},
> + {IPv4(192, 18, 7, 0), 24, 7},
> };
>
> +/* 2001:0200::/48 is IANA reserved range for IPv6 benchmarking
> +(RFC5180) */
> static struct ipv6_l3fwd_lpm_route ipv6_l3fwd_lpm_route_array[] = {
> - {{1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1}, 48, 0},
> - {{2, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1}, 48, 1},
> - {{3, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1}, 48, 2},
> - {{4, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1}, 48, 3},
> - {{5, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1}, 48, 4},
> - {{6, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1}, 48, 5},
> - {{7, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1}, 48, 6},
> - {{8, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1}, 48, 7},
> + {{32, 1, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, 48, 0},
> + {{32, 1, 2, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0}, 48, 1},
> + {{32, 1, 2, 0, 0, 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, 0}, 48, 2},
> + {{32, 1, 2, 0, 0, 0, 0, 0, 0, 3, 0, 0, 0, 0, 0, 0}, 48, 3},
> + {{32, 1, 2, 0, 0, 0, 0, 0, 0, 4, 0, 0, 0, 0, 0, 0}, 48, 4},
> + {{32, 1, 2, 0, 0, 0, 0, 0, 0, 5, 0, 0, 0, 0, 0, 0}, 48, 5},
> + {{32, 1, 2, 0, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 0}, 48, 6},
> + {{32, 1, 2, 0, 0, 0, 0, 0, 0, 7, 0, 0, 0, 0, 0, 0}, 48, 7},
> };
>
> #define IPV4_L3FWD_LPM_NUM_ROUTES \
> --
> 2.17.1
Regards,
Bernard.
next prev parent reply other threads:[~2019-04-08 13:07 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-18 21:35 [dpdk-dev] [PATCH v3 0/3] use RFC addresses for testing Stephen Hemminger
2018-06-18 21:35 ` [dpdk-dev] [PATCH v3 1/3] testpmd: add ability to set tx IP and UDP parameters Stephen Hemminger
2018-06-22 9:12 ` Iremonger, Bernard
2018-10-29 2:25 ` Thomas Monjalon
2018-06-26 11:47 ` Shahaf Shuler
2018-06-26 11:51 ` Shahaf Shuler
2019-04-02 20:39 ` [dpdk-dev] [PATCH v4 0/3] use RFC addresses in test applications Stephen Hemminger
2019-04-02 20:39 ` Stephen Hemminger
2019-04-02 20:39 ` [dpdk-dev] [PATCH v4 1/3] app/testpmd: add ability to set Tx IP and UDP parameters Stephen Hemminger
2019-04-02 20:39 ` Stephen Hemminger
2019-04-08 12:51 ` Iremonger, Bernard
2019-04-08 12:51 ` Iremonger, Bernard
2019-04-02 20:39 ` [dpdk-dev] [PATCH v4 2/3] examples/l3fwd: use reserved IPv4/IPv6 addresses Stephen Hemminger
2019-04-02 20:39 ` Stephen Hemminger
2019-04-08 13:07 ` Iremonger, Bernard [this message]
2019-04-08 13:07 ` Iremonger, Bernard
2019-04-09 17:14 ` Stephen Hemminger
2019-04-09 17:14 ` Stephen Hemminger
2019-04-02 20:39 ` [dpdk-dev] [PATCH v4 3/3] examples/l3fwd: format the IP addresses for printing Stephen Hemminger
2019-04-02 20:39 ` Stephen Hemminger
2019-04-08 13:14 ` Iremonger, Bernard
2019-04-08 13:14 ` Iremonger, Bernard
2019-04-09 18:20 ` [dpdk-dev] [PATCH v5 0/3] use RFC addresses in test applications Stephen Hemminger
2019-04-09 18:20 ` Stephen Hemminger
2019-04-09 18:20 ` [dpdk-dev] [PATCH v5 1/3] app/testpmd: add ability to set Tx IP and UDP parameters Stephen Hemminger
2019-04-09 18:20 ` Stephen Hemminger
2019-04-10 10:07 ` Iremonger, Bernard
2019-04-10 10:07 ` Iremonger, Bernard
2019-04-09 18:20 ` [dpdk-dev] [PATCH v5 2/3] examples/l3fwd: use reserved IPv4/IPv6 addresses Stephen Hemminger
2019-04-09 18:20 ` Stephen Hemminger
2019-04-10 8:56 ` Iremonger, Bernard
2019-04-10 8:56 ` Iremonger, Bernard
2019-04-09 18:20 ` [dpdk-dev] [PATCH v5 3/3] examples/l3fwd: format the IP addresses for printing Stephen Hemminger
2019-04-09 18:20 ` Stephen Hemminger
2019-04-10 17:41 ` [dpdk-dev] [PATCH v6 0/3] use IPv4 addresses reserved for testing Stephen Hemminger
2019-04-10 17:41 ` Stephen Hemminger
2019-04-10 17:41 ` [dpdk-dev] [PATCH v6 1/3] app/testpmd: add ability to set Tx IP and UDP parameters Stephen Hemminger
2019-04-10 17:41 ` Stephen Hemminger
2019-04-11 9:02 ` Iremonger, Bernard
2019-04-11 9:02 ` Iremonger, Bernard
2019-04-10 17:41 ` [dpdk-dev] [PATCH v6 2/3] examples/l3fwd: use reserved IPv4/IPv6 addresses Stephen Hemminger
2019-04-10 17:41 ` Stephen Hemminger
2019-04-11 9:08 ` Iremonger, Bernard
2019-04-11 9:08 ` Iremonger, Bernard
2019-04-10 17:41 ` [dpdk-dev] [PATCH v6 3/3] examples/l3fwd: format the IP addresses for printing Stephen Hemminger
2019-04-10 17:41 ` Stephen Hemminger
2019-04-21 21:55 ` [dpdk-dev] [PATCH v6 0/3] use IPv4 addresses reserved for testing Thomas Monjalon
2019-04-21 21:55 ` Thomas Monjalon
2018-06-18 21:35 ` [dpdk-dev] [PATCH v3 2/3] examples/l3fwd: use reserved IPv4/IPv6 addresses Stephen Hemminger
2018-06-22 9:19 ` Iremonger, Bernard
2018-06-18 21:35 ` [dpdk-dev] [PATCH v3 3/3] examples/l3fwd: format the IP addresses for printing Stephen Hemminger
2018-06-22 10:23 ` Iremonger, Bernard
2018-06-22 13:44 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8CEF83825BEC744B83065625E567D7C260D8555E@IRSMSX108.ger.corp.intel.com \
--to=bernard.iremonger@intel.com \
--cc=dev@dpdk.org \
--cc=stephen@networkplumber.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).