* [dpdk-dev] [RFC 00/12] introduce s390x architecture
@ 2019-04-09 19:06 Vivian Kong
2019-04-09 19:06 ` Vivian Kong
` (15 more replies)
0 siblings, 16 replies; 80+ messages in thread
From: Vivian Kong @ 2019-04-09 19:06 UTC (permalink / raw)
To: dev
To build and run DPDK on Linux on IBM Z (s390x), big endian support
is added and s390x vector intrinics are used in the implementation
of DPDK libraries.
I appreciate your feedback.
Vivian Kong (12):
mk: introduce s390x architecture
eal: add support for s390x architecture
acl: add support for s390x architecture
lpm: add support for s390x architecture
examples/l3fwd: add support for s390x architecture
net/i40e: add support for s390x architecture
test: add support for s390x architecture
hash: add support for s390x architecture
doc: introduce s390x architecture
ethdev: add cast for bus_device
mbuf: trivial fix
test: miscellaneous test fixes
MAINTAINERS | 9 +
app/test-acl/main.c | 4 +
app/test/autotest_data.py | 2 +-
app/test/test_cmdline.c | 6 +-
app/test/test_cmdline_ipaddr.c | 13 +-
app/test/test_cmdline_num.c | 111 +++
app/test/test_xmmt_ops.h | 14 +
config/defconfig_s390x-native-linux-gcc | 1 +
config/defconfig_s390x-native-linuxapp-gcc | 33 +
doc/guides/nics/features/i40e.ini | 1 +
doc/guides/nics/features/i40e_vec.ini | 1 +
doc/guides/rel_notes/release_19_05.rst | 3 +
drivers/net/i40e/Makefile | 2 +
drivers/net/i40e/i40e_rxtx_vec_s390x.c | 631 ++++++++++++++++++
examples/l3fwd/l3fwd_em.c | 8 +
examples/l3fwd/l3fwd_lpm_s390x.h | 137 ++++
examples/l3fwd/l3fwd_s390x.h | 259 +++++++
lib/librte_acl/Makefile | 2 +
lib/librte_acl/acl_bld.c | 69 +-
lib/librte_acl/acl_gen.c | 9 +
lib/librte_acl/acl_run_scalar.c | 8 +
lib/librte_acl/rte_acl.c | 4 +
lib/librte_acl/rte_acl.h | 1 +
.../common/arch/s390x/rte_cpuflags.c | 90 +++
lib/librte_eal/common/arch/s390x/rte_cycles.c | 11 +
.../common/arch/s390x/rte_hypervisor.c | 11 +
.../common/include/arch/s390x/rte_atomic.h | 47 ++
.../common/include/arch/s390x/rte_byteorder.h | 43 ++
.../common/include/arch/s390x/rte_cpuflags.h | 42 ++
.../common/include/arch/s390x/rte_cycles.h | 44 ++
.../common/include/arch/s390x/rte_io.h | 18 +
.../common/include/arch/s390x/rte_memcpy.h | 55 ++
.../common/include/arch/s390x/rte_pause.h | 22 +
.../common/include/arch/s390x/rte_prefetch.h | 40 ++
.../common/include/arch/s390x/rte_rwlock.h | 42 ++
.../common/include/arch/s390x/rte_spinlock.h | 85 +++
.../include/arch/s390x/rte_ticketlock.h | 18 +
.../common/include/arch/s390x/rte_vect.h | 33 +
lib/librte_ethdev/rte_ethdev_pci.h | 2 +-
lib/librte_hash/rte_fbk_hash.h | 7 +
lib/librte_lpm/Makefile | 2 +
lib/librte_lpm/meson.build | 2 +-
lib/librte_lpm/rte_lpm.h | 2 +
lib/librte_lpm/rte_lpm6.c | 26 +-
lib/librte_lpm/rte_lpm_s390x.h | 130 ++++
lib/librte_mbuf/rte_mbuf.h | 2 +-
mk/arch/s390x/rte.vars.mk | 16 +
mk/rte.cpuflags.mk | 5 +
48 files changed, 2099 insertions(+), 24 deletions(-)
create mode 120000 config/defconfig_s390x-native-linux-gcc
create mode 100644 config/defconfig_s390x-native-linuxapp-gcc
create mode 100644 drivers/net/i40e/i40e_rxtx_vec_s390x.c
create mode 100644 examples/l3fwd/l3fwd_lpm_s390x.h
create mode 100644 examples/l3fwd/l3fwd_s390x.h
create mode 100644 lib/librte_eal/common/arch/s390x/rte_cpuflags.c
create mode 100644 lib/librte_eal/common/arch/s390x/rte_cycles.c
create mode 100644 lib/librte_eal/common/arch/s390x/rte_hypervisor.c
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_atomic.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_byteorder.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_cpuflags.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_cycles.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_io.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_memcpy.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_pause.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_prefetch.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_rwlock.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_spinlock.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_ticketlock.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_vect.h
create mode 100644 lib/librte_lpm/rte_lpm_s390x.h
create mode 100644 mk/arch/s390x/rte.vars.mk
--
2.17.1
^ permalink raw reply [flat|nested] 80+ messages in thread
* [dpdk-dev] [RFC 00/12] introduce s390x architecture
2019-04-09 19:06 [dpdk-dev] [RFC 00/12] introduce s390x architecture Vivian Kong
@ 2019-04-09 19:06 ` Vivian Kong
2019-04-09 19:06 ` [dpdk-dev] [RFC 01/12] mk: " Vivian Kong
` (14 subsequent siblings)
15 siblings, 0 replies; 80+ messages in thread
From: Vivian Kong @ 2019-04-09 19:06 UTC (permalink / raw)
To: dev
To build and run DPDK on Linux on IBM Z (s390x), big endian support
is added and s390x vector intrinics are used in the implementation
of DPDK libraries.
I appreciate your feedback.
Vivian Kong (12):
mk: introduce s390x architecture
eal: add support for s390x architecture
acl: add support for s390x architecture
lpm: add support for s390x architecture
examples/l3fwd: add support for s390x architecture
net/i40e: add support for s390x architecture
test: add support for s390x architecture
hash: add support for s390x architecture
doc: introduce s390x architecture
ethdev: add cast for bus_device
mbuf: trivial fix
test: miscellaneous test fixes
MAINTAINERS | 9 +
app/test-acl/main.c | 4 +
app/test/autotest_data.py | 2 +-
app/test/test_cmdline.c | 6 +-
app/test/test_cmdline_ipaddr.c | 13 +-
app/test/test_cmdline_num.c | 111 +++
app/test/test_xmmt_ops.h | 14 +
config/defconfig_s390x-native-linux-gcc | 1 +
config/defconfig_s390x-native-linuxapp-gcc | 33 +
doc/guides/nics/features/i40e.ini | 1 +
doc/guides/nics/features/i40e_vec.ini | 1 +
doc/guides/rel_notes/release_19_05.rst | 3 +
drivers/net/i40e/Makefile | 2 +
drivers/net/i40e/i40e_rxtx_vec_s390x.c | 631 ++++++++++++++++++
examples/l3fwd/l3fwd_em.c | 8 +
examples/l3fwd/l3fwd_lpm_s390x.h | 137 ++++
examples/l3fwd/l3fwd_s390x.h | 259 +++++++
lib/librte_acl/Makefile | 2 +
lib/librte_acl/acl_bld.c | 69 +-
lib/librte_acl/acl_gen.c | 9 +
lib/librte_acl/acl_run_scalar.c | 8 +
lib/librte_acl/rte_acl.c | 4 +
lib/librte_acl/rte_acl.h | 1 +
.../common/arch/s390x/rte_cpuflags.c | 90 +++
lib/librte_eal/common/arch/s390x/rte_cycles.c | 11 +
.../common/arch/s390x/rte_hypervisor.c | 11 +
.../common/include/arch/s390x/rte_atomic.h | 47 ++
.../common/include/arch/s390x/rte_byteorder.h | 43 ++
.../common/include/arch/s390x/rte_cpuflags.h | 42 ++
.../common/include/arch/s390x/rte_cycles.h | 44 ++
.../common/include/arch/s390x/rte_io.h | 18 +
.../common/include/arch/s390x/rte_memcpy.h | 55 ++
.../common/include/arch/s390x/rte_pause.h | 22 +
.../common/include/arch/s390x/rte_prefetch.h | 40 ++
.../common/include/arch/s390x/rte_rwlock.h | 42 ++
.../common/include/arch/s390x/rte_spinlock.h | 85 +++
.../include/arch/s390x/rte_ticketlock.h | 18 +
.../common/include/arch/s390x/rte_vect.h | 33 +
lib/librte_ethdev/rte_ethdev_pci.h | 2 +-
lib/librte_hash/rte_fbk_hash.h | 7 +
lib/librte_lpm/Makefile | 2 +
lib/librte_lpm/meson.build | 2 +-
lib/librte_lpm/rte_lpm.h | 2 +
lib/librte_lpm/rte_lpm6.c | 26 +-
lib/librte_lpm/rte_lpm_s390x.h | 130 ++++
lib/librte_mbuf/rte_mbuf.h | 2 +-
mk/arch/s390x/rte.vars.mk | 16 +
mk/rte.cpuflags.mk | 5 +
48 files changed, 2099 insertions(+), 24 deletions(-)
create mode 120000 config/defconfig_s390x-native-linux-gcc
create mode 100644 config/defconfig_s390x-native-linuxapp-gcc
create mode 100644 drivers/net/i40e/i40e_rxtx_vec_s390x.c
create mode 100644 examples/l3fwd/l3fwd_lpm_s390x.h
create mode 100644 examples/l3fwd/l3fwd_s390x.h
create mode 100644 lib/librte_eal/common/arch/s390x/rte_cpuflags.c
create mode 100644 lib/librte_eal/common/arch/s390x/rte_cycles.c
create mode 100644 lib/librte_eal/common/arch/s390x/rte_hypervisor.c
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_atomic.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_byteorder.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_cpuflags.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_cycles.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_io.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_memcpy.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_pause.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_prefetch.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_rwlock.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_spinlock.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_ticketlock.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_vect.h
create mode 100644 lib/librte_lpm/rte_lpm_s390x.h
create mode 100644 mk/arch/s390x/rte.vars.mk
--
2.17.1
^ permalink raw reply [flat|nested] 80+ messages in thread
* [dpdk-dev] [RFC 01/12] mk: introduce s390x architecture
2019-04-09 19:06 [dpdk-dev] [RFC 00/12] introduce s390x architecture Vivian Kong
2019-04-09 19:06 ` Vivian Kong
@ 2019-04-09 19:06 ` Vivian Kong
2019-04-09 19:06 ` Vivian Kong
2019-04-09 19:38 ` Luca Boccassi
2019-04-09 19:06 ` [dpdk-dev] [RFC 02/12] eal: add support for " Vivian Kong
` (13 subsequent siblings)
15 siblings, 2 replies; 80+ messages in thread
From: Vivian Kong @ 2019-04-09 19:06 UTC (permalink / raw)
To: dev
Add config and mk files to build DPDK on Linux on IBM Z (s390x).
Signed-off-by: Vivian Kong <vivkong@ca.ibm.com>
---
config/defconfig_s390x-native-linux-gcc | 1 +
config/defconfig_s390x-native-linuxapp-gcc | 33 ++++++++++++++++++++++
mk/arch/s390x/rte.vars.mk | 16 +++++++++++
mk/rte.cpuflags.mk | 5 ++++
4 files changed, 55 insertions(+)
create mode 120000 config/defconfig_s390x-native-linux-gcc
create mode 100644 config/defconfig_s390x-native-linuxapp-gcc
create mode 100644 mk/arch/s390x/rte.vars.mk
diff --git a/config/defconfig_s390x-native-linux-gcc b/config/defconfig_s390x-native-linux-gcc
new file mode 120000
index 000000000..28b9275cf
--- /dev/null
+++ b/config/defconfig_s390x-native-linux-gcc
@@ -0,0 +1 @@
+defconfig_s390x-native-linuxapp-gcc
\ No newline at end of file
diff --git a/config/defconfig_s390x-native-linuxapp-gcc b/config/defconfig_s390x-native-linuxapp-gcc
new file mode 100644
index 000000000..1241157d9
--- /dev/null
+++ b/config/defconfig_s390x-native-linuxapp-gcc
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: BSD-3-Clause
+#
+# (c) Copyright IBM Corp. 2018, 2019
+
+#include "common_linux"
+
+CONFIG_RTE_MACHINE="z13"
+
+CONFIG_RTE_ARCH="s390x"
+CONFIG_RTE_ARCH_64=y
+CONFIG_RTE_ARCH_S390X=y
+
+#CONFIG_RTE_MAX_LCORE=256
+#CONFIG_RTE_MAX_NUMA_NODES=32
+#CONFIG_RTE_CACHE_LINE_SIZE=128
+
+CONFIG_RTE_TOOLCHAIN="gcc"
+CONFIG_RTE_TOOLCHAIN_GCC=y
+CONFIG_RTE_FORCE_INTRINSICS=y
+# Note: Power doesn't have this support
+CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=n
+
+# Note: Initially, all of the PMD drivers compilation are turned off on s390x
+# Will turn on them only after the successful testing on s390x
+CONFIG_RTE_LIBRTE_IXGBE_PMD=n
+CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
+CONFIG_RTE_LIBRTE_VMXNET3_PMD=n
+CONFIG_RTE_LIBRTE_ENIC_PMD=n
+CONFIG_RTE_LIBRTE_FM10K_PMD=n
+CONFIG_RTE_LIBRTE_SFC_EFX_PMD=n
+CONFIG_RTE_LIBRTE_AVP_PMD=n
+CONFIG_RTE_LIBRTE_BNXT_PMD=n
+CONFIG_RTE_LIBRTE_ENETC_PMD=n
diff --git a/mk/arch/s390x/rte.vars.mk b/mk/arch/s390x/rte.vars.mk
new file mode 100644
index 000000000..9740c5684
--- /dev/null
+++ b/mk/arch/s390x/rte.vars.mk
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# (c) Copyright IBM Corp. 2018, 2019
+
+ARCH ?= s390
+CROSS ?=
+
+CPU_CFLAGS ?= -m64
+CPU_LDFLAGS ?=
+CPU_ASFLAGS ?= -felf64
+
+export ARCH CROSS CPU_CFLAGS CPU_LDFLAGS CPU_ASFLAGS
+
+RTE_OBJCOPY_TARGET = elf64-s390
+RTE_OBJCOPY_ARCH = s390
+
+export RTE_OBJCOPY_TARGET RTE_OBJCOPY_ARCH
diff --git a/mk/rte.cpuflags.mk b/mk/rte.cpuflags.mk
index 541211c61..195022926 100644
--- a/mk/rte.cpuflags.mk
+++ b/mk/rte.cpuflags.mk
@@ -93,6 +93,11 @@ ifneq ($(filter $(AUTO_CPUFLAGS),__builtin_vsx_xvnmaddadp),)
CPUFLAGS += VSX
endif
+# s390x
+ifneq ($(filter $(AUTO_CPUFLAGS),__s390x__),)
+CPUFLAGS += ZARCH
+endif
+
# ARM flags
ifneq ($(filter __ARM_NEON __aarch64__,$(AUTO_CPUFLAGS)),)
CPUFLAGS += NEON
--
2.17.1
^ permalink raw reply [flat|nested] 80+ messages in thread
* [dpdk-dev] [RFC 01/12] mk: introduce s390x architecture
2019-04-09 19:06 ` [dpdk-dev] [RFC 01/12] mk: " Vivian Kong
@ 2019-04-09 19:06 ` Vivian Kong
2019-04-09 19:38 ` Luca Boccassi
1 sibling, 0 replies; 80+ messages in thread
From: Vivian Kong @ 2019-04-09 19:06 UTC (permalink / raw)
To: dev
Add config and mk files to build DPDK on Linux on IBM Z (s390x).
Signed-off-by: Vivian Kong <vivkong@ca.ibm.com>
---
config/defconfig_s390x-native-linux-gcc | 1 +
config/defconfig_s390x-native-linuxapp-gcc | 33 ++++++++++++++++++++++
mk/arch/s390x/rte.vars.mk | 16 +++++++++++
mk/rte.cpuflags.mk | 5 ++++
4 files changed, 55 insertions(+)
create mode 120000 config/defconfig_s390x-native-linux-gcc
create mode 100644 config/defconfig_s390x-native-linuxapp-gcc
create mode 100644 mk/arch/s390x/rte.vars.mk
diff --git a/config/defconfig_s390x-native-linux-gcc b/config/defconfig_s390x-native-linux-gcc
new file mode 120000
index 000000000..28b9275cf
--- /dev/null
+++ b/config/defconfig_s390x-native-linux-gcc
@@ -0,0 +1 @@
+defconfig_s390x-native-linuxapp-gcc
\ No newline at end of file
diff --git a/config/defconfig_s390x-native-linuxapp-gcc b/config/defconfig_s390x-native-linuxapp-gcc
new file mode 100644
index 000000000..1241157d9
--- /dev/null
+++ b/config/defconfig_s390x-native-linuxapp-gcc
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: BSD-3-Clause
+#
+# (c) Copyright IBM Corp. 2018, 2019
+
+#include "common_linux"
+
+CONFIG_RTE_MACHINE="z13"
+
+CONFIG_RTE_ARCH="s390x"
+CONFIG_RTE_ARCH_64=y
+CONFIG_RTE_ARCH_S390X=y
+
+#CONFIG_RTE_MAX_LCORE=256
+#CONFIG_RTE_MAX_NUMA_NODES=32
+#CONFIG_RTE_CACHE_LINE_SIZE=128
+
+CONFIG_RTE_TOOLCHAIN="gcc"
+CONFIG_RTE_TOOLCHAIN_GCC=y
+CONFIG_RTE_FORCE_INTRINSICS=y
+# Note: Power doesn't have this support
+CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=n
+
+# Note: Initially, all of the PMD drivers compilation are turned off on s390x
+# Will turn on them only after the successful testing on s390x
+CONFIG_RTE_LIBRTE_IXGBE_PMD=n
+CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
+CONFIG_RTE_LIBRTE_VMXNET3_PMD=n
+CONFIG_RTE_LIBRTE_ENIC_PMD=n
+CONFIG_RTE_LIBRTE_FM10K_PMD=n
+CONFIG_RTE_LIBRTE_SFC_EFX_PMD=n
+CONFIG_RTE_LIBRTE_AVP_PMD=n
+CONFIG_RTE_LIBRTE_BNXT_PMD=n
+CONFIG_RTE_LIBRTE_ENETC_PMD=n
diff --git a/mk/arch/s390x/rte.vars.mk b/mk/arch/s390x/rte.vars.mk
new file mode 100644
index 000000000..9740c5684
--- /dev/null
+++ b/mk/arch/s390x/rte.vars.mk
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# (c) Copyright IBM Corp. 2018, 2019
+
+ARCH ?= s390
+CROSS ?=
+
+CPU_CFLAGS ?= -m64
+CPU_LDFLAGS ?=
+CPU_ASFLAGS ?= -felf64
+
+export ARCH CROSS CPU_CFLAGS CPU_LDFLAGS CPU_ASFLAGS
+
+RTE_OBJCOPY_TARGET = elf64-s390
+RTE_OBJCOPY_ARCH = s390
+
+export RTE_OBJCOPY_TARGET RTE_OBJCOPY_ARCH
diff --git a/mk/rte.cpuflags.mk b/mk/rte.cpuflags.mk
index 541211c61..195022926 100644
--- a/mk/rte.cpuflags.mk
+++ b/mk/rte.cpuflags.mk
@@ -93,6 +93,11 @@ ifneq ($(filter $(AUTO_CPUFLAGS),__builtin_vsx_xvnmaddadp),)
CPUFLAGS += VSX
endif
+# s390x
+ifneq ($(filter $(AUTO_CPUFLAGS),__s390x__),)
+CPUFLAGS += ZARCH
+endif
+
# ARM flags
ifneq ($(filter __ARM_NEON __aarch64__,$(AUTO_CPUFLAGS)),)
CPUFLAGS += NEON
--
2.17.1
^ permalink raw reply [flat|nested] 80+ messages in thread
* [dpdk-dev] [RFC 02/12] eal: add support for s390x architecture
2019-04-09 19:06 [dpdk-dev] [RFC 00/12] introduce s390x architecture Vivian Kong
2019-04-09 19:06 ` Vivian Kong
2019-04-09 19:06 ` [dpdk-dev] [RFC 01/12] mk: " Vivian Kong
@ 2019-04-09 19:06 ` Vivian Kong
2019-04-09 19:06 ` Vivian Kong
2019-04-09 19:06 ` [dpdk-dev] [RFC 03/12] acl: " Vivian Kong
` (12 subsequent siblings)
15 siblings, 1 reply; 80+ messages in thread
From: Vivian Kong @ 2019-04-09 19:06 UTC (permalink / raw)
To: dev
Implement DPDK EAL for s390x architecture.
Signed-off-by: Vivian Kong <vivkong@ca.ibm.com>
---
.../common/arch/s390x/rte_cpuflags.c | 90 +++++++++++++++++++
lib/librte_eal/common/arch/s390x/rte_cycles.c | 11 +++
.../common/arch/s390x/rte_hypervisor.c | 11 +++
.../common/include/arch/s390x/rte_atomic.h | 47 ++++++++++
.../common/include/arch/s390x/rte_byteorder.h | 43 +++++++++
.../common/include/arch/s390x/rte_cpuflags.h | 42 +++++++++
.../common/include/arch/s390x/rte_cycles.h | 44 +++++++++
.../common/include/arch/s390x/rte_io.h | 18 ++++
.../common/include/arch/s390x/rte_memcpy.h | 55 ++++++++++++
.../common/include/arch/s390x/rte_pause.h | 22 +++++
.../common/include/arch/s390x/rte_prefetch.h | 40 +++++++++
.../common/include/arch/s390x/rte_rwlock.h | 42 +++++++++
.../common/include/arch/s390x/rte_spinlock.h | 85 ++++++++++++++++++
.../include/arch/s390x/rte_ticketlock.h | 18 ++++
.../common/include/arch/s390x/rte_vect.h | 33 +++++++
15 files changed, 601 insertions(+)
create mode 100644 lib/librte_eal/common/arch/s390x/rte_cpuflags.c
create mode 100644 lib/librte_eal/common/arch/s390x/rte_cycles.c
create mode 100644 lib/librte_eal/common/arch/s390x/rte_hypervisor.c
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_atomic.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_byteorder.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_cpuflags.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_cycles.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_io.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_memcpy.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_pause.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_prefetch.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_rwlock.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_spinlock.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_ticketlock.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_vect.h
diff --git a/lib/librte_eal/common/arch/s390x/rte_cpuflags.c b/lib/librte_eal/common/arch/s390x/rte_cpuflags.c
new file mode 100644
index 000000000..1f8c6ef41
--- /dev/null
+++ b/lib/librte_eal/common/arch/s390x/rte_cpuflags.c
@@ -0,0 +1,90 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * (c) Copyright IBM Corp. 2018, 2019
+ */
+
+#include "rte_cpuflags.h"
+
+#include <elf.h>
+#include <fcntl.h>
+#include <assert.h>
+#include <unistd.h>
+
+/* Symbolic values for the entries in the auxiliary table */
+#define AT_HWCAP 16
+#define AT_HWCAP2 26
+
+/* software based registers */
+enum cpu_register_t {
+ REG_NONE = 0,
+ REG_HWCAP,
+ REG_HWCAP2,
+ REG_MAX
+};
+
+typedef uint32_t hwcap_registers_t[REG_MAX];
+
+struct feature_entry {
+ uint32_t reg;
+ uint32_t bit;
+#define CPU_FLAG_NAME_MAX_LEN 64
+ char name[CPU_FLAG_NAME_MAX_LEN];
+};
+
+#define FEAT_DEF(name, reg, bit) \
+ [RTE_CPUFLAG_##name] = {reg, bit, #name},
+
+const struct feature_entry rte_cpu_feature_table[] = {
+ FEAT_DEF(ESAN3, REG_HWCAP, 0)
+ FEAT_DEF(ZARCH, REG_HWCAP, 1)
+ FEAT_DEF(STFLE, REG_HWCAP, 2)
+ FEAT_DEF(MSA, REG_HWCAP, 3)
+ FEAT_DEF(LDISP, REG_HWCAP, 4)
+ FEAT_DEF(EIMM, REG_HWCAP, 5)
+ FEAT_DEF(DFP, REG_HWCAP, 6)
+ FEAT_DEF(HPAGE, REG_HWCAP, 7)
+ FEAT_DEF(ETF3EH, REG_HWCAP, 8)
+ FEAT_DEF(HIGH_GPRS, REG_HWCAP, 9)
+ FEAT_DEF(TE, REG_HWCAP, 10)
+ FEAT_DEF(VXRS, REG_HWCAP, 11)
+ FEAT_DEF(VXRS_BCD, REG_HWCAP, 12)
+ FEAT_DEF(VXRS_EXT, REG_HWCAP, 13)
+ FEAT_DEF(GS, REG_HWCAP, 14)
+};
+
+/*
+ * Read AUXV software register and get cpu features for Power
+ */
+static void
+rte_cpu_get_features(hwcap_registers_t out)
+{
+ out[REG_HWCAP] = rte_cpu_getauxval(AT_HWCAP);
+ out[REG_HWCAP2] = rte_cpu_getauxval(AT_HWCAP2);
+}
+
+/*
+ * Checks if a particular flag is available on current machine.
+ */
+int
+rte_cpu_get_flag_enabled(enum rte_cpu_flag_t feature)
+{
+ const struct feature_entry *feat;
+ hwcap_registers_t regs = {0};
+
+ if (feature >= RTE_CPUFLAG_NUMFLAGS)
+ return -ENOENT;
+
+ feat = &rte_cpu_feature_table[feature];
+ if (feat->reg == REG_NONE)
+ return -EFAULT;
+
+ rte_cpu_get_features(regs);
+ return (regs[feat->reg] >> feat->bit) & 1;
+}
+
+const char *
+rte_cpu_get_flag_name(enum rte_cpu_flag_t feature)
+{
+ if (feature >= RTE_CPUFLAG_NUMFLAGS)
+ return NULL;
+ return rte_cpu_feature_table[feature].name;
+}
diff --git a/lib/librte_eal/common/arch/s390x/rte_cycles.c b/lib/librte_eal/common/arch/s390x/rte_cycles.c
new file mode 100644
index 000000000..b29c4454a
--- /dev/null
+++ b/lib/librte_eal/common/arch/s390x/rte_cycles.c
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * (c) Copyright IBM Corp. 2018, 2019
+ */
+
+#include "eal_private.h"
+
+uint64_t
+get_tsc_freq_arch(void)
+{
+ return 0;
+}
diff --git a/lib/librte_eal/common/arch/s390x/rte_hypervisor.c b/lib/librte_eal/common/arch/s390x/rte_hypervisor.c
new file mode 100644
index 000000000..22b0c5cc4
--- /dev/null
+++ b/lib/librte_eal/common/arch/s390x/rte_hypervisor.c
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * (c) Copyright IBM Corp. 2018, 2019
+ */
+
+#include "rte_hypervisor.h"
+
+enum rte_hypervisor
+rte_hypervisor_get(void)
+{
+ return RTE_HYPERVISOR_UNKNOWN;
+}
diff --git a/lib/librte_eal/common/include/arch/s390x/rte_atomic.h b/lib/librte_eal/common/include/arch/s390x/rte_atomic.h
new file mode 100644
index 000000000..5fce6d5f0
--- /dev/null
+++ b/lib/librte_eal/common/include/arch/s390x/rte_atomic.h
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * (c) Copyright IBM Corp. 2018, 2019
+ */
+
+#ifndef _RTE_ATOMIC_S390X_H_
+#define _RTE_ATOMIC_S390X_H_
+
+#ifndef RTE_FORCE_INTRINSICS
+# error Platform must be built with CONFIG_RTE_FORCE_INTRINSICS
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "generic/rte_atomic.h"
+
+//#define dsb(opt) asm volatile("" : : : "memory")
+//#define dmb(opt) asm volatile("" : : : "memory")
+
+#define rte_mb() rte_compiler_barrier() //asm volatile("" : : : "memory")
+
+#define rte_wmb() rte_mb()
+
+#define rte_rmb() rte_mb()
+
+#define rte_smp_mb() rte_mb()
+
+#define rte_smp_wmb() rte_wmb()
+
+#define rte_smp_rmb() rte_rmb()
+
+#define rte_io_mb() rte_mb()
+
+#define rte_io_wmb() rte_wmb()
+
+#define rte_io_rmb() rte_rmb()
+
+#define rte_cio_wmb() rte_wmb()
+
+#define rte_cio_rmb() rte_rmb()
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_ATOMIC_S390X_H_ */
diff --git a/lib/librte_eal/common/include/arch/s390x/rte_byteorder.h b/lib/librte_eal/common/include/arch/s390x/rte_byteorder.h
new file mode 100644
index 000000000..de6e410b4
--- /dev/null
+++ b/lib/librte_eal/common/include/arch/s390x/rte_byteorder.h
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * (c) Copyright IBM Corp. 2018, 2019
+ */
+
+/* Inspired from FreeBSD src/sys/powerpc/include/endian.h
+ * Copyright (c) 1987, 1991, 1993
+ * The Regents of the University of California. All rights reserved.
+ */
+
+#ifndef _RTE_BYTEORDER_S390X_H_
+#define _RTE_BYTEORDER_S390X_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+#include "generic/rte_byteorder.h"
+
+/* s390x is big endian
+ */
+
+#define rte_cpu_to_le_16(x) rte_bswap16(x)
+#define rte_cpu_to_le_32(x) rte_bswap32(x)
+#define rte_cpu_to_le_64(x) rte_bswap64(x)
+
+#define rte_cpu_to_be_16(x) (x)
+#define rte_cpu_to_be_32(x) (x)
+#define rte_cpu_to_be_64(x) (x)
+
+#define rte_le_to_cpu_16(x) rte_bswap16(x)
+#define rte_le_to_cpu_32(x) rte_bswap32(x)
+#define rte_le_to_cpu_64(x) rte_bswap64(x)
+
+#define rte_be_to_cpu_16(x) (x)
+#define rte_be_to_cpu_32(x) (x)
+#define rte_be_to_cpu_64(x) (x)
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_BYTEORDER_S390X_H_ */
diff --git a/lib/librte_eal/common/include/arch/s390x/rte_cpuflags.h b/lib/librte_eal/common/include/arch/s390x/rte_cpuflags.h
new file mode 100644
index 000000000..bfeff3f98
--- /dev/null
+++ b/lib/librte_eal/common/include/arch/s390x/rte_cpuflags.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * (c) Copyright IBM Corp. 2018, 2019
+ */
+
+#ifndef _RTE_CPUFLAGS_S390X_H_
+#define _RTE_CPUFLAGS_S390X_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Enumeration of all CPU features supported
+ */
+enum rte_cpu_flag_t {
+ RTE_CPUFLAG_ESAN3 = 0,
+ RTE_CPUFLAG_ZARCH,
+ RTE_CPUFLAG_STFLE,
+ RTE_CPUFLAG_MSA,
+ RTE_CPUFLAG_LDISP,
+ RTE_CPUFLAG_EIMM,
+ RTE_CPUFLAG_DFP,
+ RTE_CPUFLAG_HPAGE, //from elf.h
+ //RTE_CPUFLAG_EDAT, //from hwcap.h
+ RTE_CPUFLAG_ETF3EH,
+ RTE_CPUFLAG_HIGH_GPRS,
+ RTE_CPUFLAG_TE,
+ RTE_CPUFLAG_VXRS,
+ RTE_CPUFLAG_VXRS_BCD,
+ RTE_CPUFLAG_VXRS_EXT,
+ RTE_CPUFLAG_GS,
+ /* The last item */
+ RTE_CPUFLAG_NUMFLAGS,/**< This should always be the last! */
+};
+
+#include "generic/rte_cpuflags.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_CPUFLAGS_S390X_H_ */
diff --git a/lib/librte_eal/common/include/arch/s390x/rte_cycles.h b/lib/librte_eal/common/include/arch/s390x/rte_cycles.h
new file mode 100644
index 000000000..211bbe448
--- /dev/null
+++ b/lib/librte_eal/common/include/arch/s390x/rte_cycles.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * (c) Copyright IBM Corp. 2018, 2019
+ */
+
+#ifndef _RTE_CYCLES_S390X_H_
+#define _RTE_CYCLES_S390X_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "generic/rte_cycles.h"
+
+#include <rte_common.h>
+
+/**
+ * Read the time base register.
+ *
+ * @return
+ * The time base for this lcore.
+ */
+static inline uint64_t
+rte_rdtsc(void)
+{
+ uint64_t tsc;
+ asm volatile("stck %0" : "=Q"(tsc) : : "cc");
+ return tsc;
+}
+
+static inline uint64_t
+rte_rdtsc_precise(void)
+{
+ rte_mb();
+ return rte_rdtsc();
+}
+
+static inline uint64_t
+rte_get_tsc_cycles(void) { return rte_rdtsc(); }
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_CYCLES_S390X_H_ */
diff --git a/lib/librte_eal/common/include/arch/s390x/rte_io.h b/lib/librte_eal/common/include/arch/s390x/rte_io.h
new file mode 100644
index 000000000..e6b718ef3
--- /dev/null
+++ b/lib/librte_eal/common/include/arch/s390x/rte_io.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * (c) Copyright IBM Corp. 2018, 2019
+ */
+
+#ifndef _RTE_IO_S390X_H_
+#define _RTE_IO_S390X_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "generic/rte_io.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_IO_S390X_H_ */
diff --git a/lib/librte_eal/common/include/arch/s390x/rte_memcpy.h b/lib/librte_eal/common/include/arch/s390x/rte_memcpy.h
new file mode 100644
index 000000000..1135b1af6
--- /dev/null
+++ b/lib/librte_eal/common/include/arch/s390x/rte_memcpy.h
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * (c) Copyright IBM Corp. 2018, 2019
+ */
+
+#ifndef _RTE_MEMCPY_S390X_H_
+#define _RTE_MEMCPY_S390X_H_
+
+#include <stdint.h>
+#include <string.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "generic/rte_memcpy.h"
+
+
+static inline void
+rte_mov16(uint8_t *dst, const uint8_t *src)
+{
+ memcpy(dst, src, 16);
+}
+static inline void
+rte_mov32(uint8_t *dst, const uint8_t *src)
+{
+ memcpy(dst, src, 32);
+}
+static inline void
+rte_mov48(uint8_t *dst, const uint8_t *src)
+{
+ memcpy(dst, src, 48);
+}
+static inline void
+rte_mov64(uint8_t *dst, const uint8_t *src)
+{
+ memcpy(dst, src, 64);
+}
+static inline void
+rte_mov128(uint8_t *dst, const uint8_t *src)
+{
+ memcpy(dst, src, 128);
+}
+static inline void
+rte_mov256(uint8_t *dst, const uint8_t *src)
+{
+ memcpy(dst, src, 256);
+}
+#define rte_memcpy(d, s, n) memcpy((d), (s), (n))
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_MEMCPY_S390X_H_ */
diff --git a/lib/librte_eal/common/include/arch/s390x/rte_pause.h b/lib/librte_eal/common/include/arch/s390x/rte_pause.h
new file mode 100644
index 000000000..be90ce6a1
--- /dev/null
+++ b/lib/librte_eal/common/include/arch/s390x/rte_pause.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * (c) Copyright IBM Corp. 2018, 2019
+ */
+
+#ifndef _RTE_PAUSE_S390X_H_
+#define _RTE_PAUSE_S390X_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "generic/rte_pause.h"
+
+static inline void rte_pause(void)
+{
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_PAUSE_S390X_H_ */
diff --git a/lib/librte_eal/common/include/arch/s390x/rte_prefetch.h b/lib/librte_eal/common/include/arch/s390x/rte_prefetch.h
new file mode 100644
index 000000000..c76c6d898
--- /dev/null
+++ b/lib/librte_eal/common/include/arch/s390x/rte_prefetch.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * (c) Copyright IBM Corp. 2018, 2019
+ */
+
+#ifndef _RTE_PREFETCH_S390X_H_
+#define _RTE_PREFETCH_S390X_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <rte_common.h>
+#include "generic/rte_prefetch.h"
+
+static inline void rte_prefetch0(const volatile void *p)
+{
+ asm volatile ("pfd 1, 0(%[p])" : : [p] "r" (p));
+}
+
+static inline void rte_prefetch1(const volatile void *p)
+{
+ asm volatile ("pfd 1, 0(%[p])" : : [p] "r" (p));
+}
+
+static inline void rte_prefetch2(const volatile void *p)
+{
+ asm volatile ("pfd 1, 0(%[p])" : : [p] "r" (p));
+}
+
+static inline void rte_prefetch_non_temporal(const volatile void *p)
+{
+ /* non-temporal version not available, fallback to rte_prefetch0 */
+ rte_prefetch0(p);
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_PREFETCH_S390X_H_ */
diff --git a/lib/librte_eal/common/include/arch/s390x/rte_rwlock.h b/lib/librte_eal/common/include/arch/s390x/rte_rwlock.h
new file mode 100644
index 000000000..f649484f3
--- /dev/null
+++ b/lib/librte_eal/common/include/arch/s390x/rte_rwlock.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * (c) Copyright IBM Corp. 2018, 2019
+ */
+
+#ifndef _RTE_RWLOCK_S390X_H_
+#define _RTE_RWLOCK_S390X_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "generic/rte_rwlock.h"
+
+static inline void
+rte_rwlock_read_lock_tm(rte_rwlock_t *rwl)
+{
+ rte_rwlock_read_lock(rwl);
+}
+
+static inline void
+rte_rwlock_read_unlock_tm(rte_rwlock_t *rwl)
+{
+ rte_rwlock_read_unlock(rwl);
+}
+
+static inline void
+rte_rwlock_write_lock_tm(rte_rwlock_t *rwl)
+{
+ rte_rwlock_write_lock(rwl);
+}
+
+static inline void
+rte_rwlock_write_unlock_tm(rte_rwlock_t *rwl)
+{
+ rte_rwlock_write_unlock(rwl);
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_RWLOCK_S390X_H_ */
diff --git a/lib/librte_eal/common/include/arch/s390x/rte_spinlock.h b/lib/librte_eal/common/include/arch/s390x/rte_spinlock.h
new file mode 100644
index 000000000..0434864fb
--- /dev/null
+++ b/lib/librte_eal/common/include/arch/s390x/rte_spinlock.h
@@ -0,0 +1,85 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * (c) Copyright IBM Corp. 2018, 2019
+ */
+
+#ifndef _RTE_SPINLOCK_S390X_H_
+#define _RTE_SPINLOCK_S390X_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <rte_common.h>
+#include "generic/rte_spinlock.h"
+
+#ifndef RTE_FORCE_INTRINSICS
+
+static inline void
+rte_spinlock_lock(rte_spinlock_t *sl)
+{
+ while (__sync_lock_test_and_set(&sl->locked, 1))
+ while (sl->locked)
+ rte_pause();
+}
+
+static inline void
+rte_spinlock_unlock(rte_spinlock_t *sl)
+{
+ __sync_lock_release(&sl->locked);
+}
+
+static inline int
+rte_spinlock_trylock(rte_spinlock_t *sl)
+{
+ return __sync_lock_test_and_set(&sl->locked, 1) == 0;
+}
+
+#endif
+
+
+static inline int rte_tm_supported(void)
+{
+ return 0;
+}
+
+static inline void
+rte_spinlock_lock_tm(rte_spinlock_t *sl)
+{
+ rte_spinlock_lock(sl); /* fall-back */
+}
+
+static inline int
+rte_spinlock_trylock_tm(rte_spinlock_t *sl)
+{
+ return rte_spinlock_trylock(sl);
+}
+
+static inline void
+rte_spinlock_unlock_tm(rte_spinlock_t *sl)
+{
+ rte_spinlock_unlock(sl);
+}
+
+static inline void
+rte_spinlock_recursive_lock_tm(rte_spinlock_recursive_t *slr)
+{
+ rte_spinlock_recursive_lock(slr); /* fall-back */
+}
+
+static inline void
+rte_spinlock_recursive_unlock_tm(rte_spinlock_recursive_t *slr)
+{
+ rte_spinlock_recursive_unlock(slr);
+}
+
+static inline int
+rte_spinlock_recursive_trylock_tm(rte_spinlock_recursive_t *slr)
+{
+ return rte_spinlock_recursive_trylock(slr);
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_SPINLOCK_S390X_H_ */
diff --git a/lib/librte_eal/common/include/arch/s390x/rte_ticketlock.h b/lib/librte_eal/common/include/arch/s390x/rte_ticketlock.h
new file mode 100644
index 000000000..0785363c9
--- /dev/null
+++ b/lib/librte_eal/common/include/arch/s390x/rte_ticketlock.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * (c) Copyright IBM Corp. 2019
+ */
+
+#ifndef _RTE_TICKETLOCK_S390X_H_
+#define _RTE_TICKETLOCK_S390X_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "generic/rte_ticketlock.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_TICKETLOCK_S390X_H_ */
diff --git a/lib/librte_eal/common/include/arch/s390x/rte_vect.h b/lib/librte_eal/common/include/arch/s390x/rte_vect.h
new file mode 100644
index 000000000..459744aa4
--- /dev/null
+++ b/lib/librte_eal/common/include/arch/s390x/rte_vect.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * (c) Copyright IBM Corp. 2018, 2019
+ */
+
+#ifndef _RTE_VECT_S390X_H_
+#define _RTE_VECT_S390X_H_
+
+#include <vecintrin.h>
+#include "generic/rte_vect.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef int xmm_t __attribute__((vector_size(4*sizeof(int))));
+
+#define XMM_SIZE (sizeof(xmm_t))
+#define XMM_MASK (XMM_SIZE - 1)
+
+typedef union rte_xmm {
+ xmm_t x;
+ uint8_t u8[XMM_SIZE / sizeof(uint8_t)];
+ uint16_t u16[XMM_SIZE / sizeof(uint16_t)];
+ uint32_t u32[XMM_SIZE / sizeof(uint32_t)];
+ uint64_t u64[XMM_SIZE / sizeof(uint64_t)];
+ double pd[XMM_SIZE / sizeof(double)];
+} __attribute__((aligned(16))) rte_xmm_t;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_VECT_S390X_H_ */
--
2.17.1
^ permalink raw reply [flat|nested] 80+ messages in thread
* [dpdk-dev] [RFC 02/12] eal: add support for s390x architecture
2019-04-09 19:06 ` [dpdk-dev] [RFC 02/12] eal: add support for " Vivian Kong
@ 2019-04-09 19:06 ` Vivian Kong
0 siblings, 0 replies; 80+ messages in thread
From: Vivian Kong @ 2019-04-09 19:06 UTC (permalink / raw)
To: dev
Implement DPDK EAL for s390x architecture.
Signed-off-by: Vivian Kong <vivkong@ca.ibm.com>
---
.../common/arch/s390x/rte_cpuflags.c | 90 +++++++++++++++++++
lib/librte_eal/common/arch/s390x/rte_cycles.c | 11 +++
.../common/arch/s390x/rte_hypervisor.c | 11 +++
.../common/include/arch/s390x/rte_atomic.h | 47 ++++++++++
.../common/include/arch/s390x/rte_byteorder.h | 43 +++++++++
.../common/include/arch/s390x/rte_cpuflags.h | 42 +++++++++
.../common/include/arch/s390x/rte_cycles.h | 44 +++++++++
.../common/include/arch/s390x/rte_io.h | 18 ++++
.../common/include/arch/s390x/rte_memcpy.h | 55 ++++++++++++
.../common/include/arch/s390x/rte_pause.h | 22 +++++
.../common/include/arch/s390x/rte_prefetch.h | 40 +++++++++
.../common/include/arch/s390x/rte_rwlock.h | 42 +++++++++
.../common/include/arch/s390x/rte_spinlock.h | 85 ++++++++++++++++++
.../include/arch/s390x/rte_ticketlock.h | 18 ++++
.../common/include/arch/s390x/rte_vect.h | 33 +++++++
15 files changed, 601 insertions(+)
create mode 100644 lib/librte_eal/common/arch/s390x/rte_cpuflags.c
create mode 100644 lib/librte_eal/common/arch/s390x/rte_cycles.c
create mode 100644 lib/librte_eal/common/arch/s390x/rte_hypervisor.c
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_atomic.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_byteorder.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_cpuflags.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_cycles.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_io.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_memcpy.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_pause.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_prefetch.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_rwlock.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_spinlock.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_ticketlock.h
create mode 100644 lib/librte_eal/common/include/arch/s390x/rte_vect.h
diff --git a/lib/librte_eal/common/arch/s390x/rte_cpuflags.c b/lib/librte_eal/common/arch/s390x/rte_cpuflags.c
new file mode 100644
index 000000000..1f8c6ef41
--- /dev/null
+++ b/lib/librte_eal/common/arch/s390x/rte_cpuflags.c
@@ -0,0 +1,90 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * (c) Copyright IBM Corp. 2018, 2019
+ */
+
+#include "rte_cpuflags.h"
+
+#include <elf.h>
+#include <fcntl.h>
+#include <assert.h>
+#include <unistd.h>
+
+/* Symbolic values for the entries in the auxiliary table */
+#define AT_HWCAP 16
+#define AT_HWCAP2 26
+
+/* software based registers */
+enum cpu_register_t {
+ REG_NONE = 0,
+ REG_HWCAP,
+ REG_HWCAP2,
+ REG_MAX
+};
+
+typedef uint32_t hwcap_registers_t[REG_MAX];
+
+struct feature_entry {
+ uint32_t reg;
+ uint32_t bit;
+#define CPU_FLAG_NAME_MAX_LEN 64
+ char name[CPU_FLAG_NAME_MAX_LEN];
+};
+
+#define FEAT_DEF(name, reg, bit) \
+ [RTE_CPUFLAG_##name] = {reg, bit, #name},
+
+const struct feature_entry rte_cpu_feature_table[] = {
+ FEAT_DEF(ESAN3, REG_HWCAP, 0)
+ FEAT_DEF(ZARCH, REG_HWCAP, 1)
+ FEAT_DEF(STFLE, REG_HWCAP, 2)
+ FEAT_DEF(MSA, REG_HWCAP, 3)
+ FEAT_DEF(LDISP, REG_HWCAP, 4)
+ FEAT_DEF(EIMM, REG_HWCAP, 5)
+ FEAT_DEF(DFP, REG_HWCAP, 6)
+ FEAT_DEF(HPAGE, REG_HWCAP, 7)
+ FEAT_DEF(ETF3EH, REG_HWCAP, 8)
+ FEAT_DEF(HIGH_GPRS, REG_HWCAP, 9)
+ FEAT_DEF(TE, REG_HWCAP, 10)
+ FEAT_DEF(VXRS, REG_HWCAP, 11)
+ FEAT_DEF(VXRS_BCD, REG_HWCAP, 12)
+ FEAT_DEF(VXRS_EXT, REG_HWCAP, 13)
+ FEAT_DEF(GS, REG_HWCAP, 14)
+};
+
+/*
+ * Read AUXV software register and get cpu features for Power
+ */
+static void
+rte_cpu_get_features(hwcap_registers_t out)
+{
+ out[REG_HWCAP] = rte_cpu_getauxval(AT_HWCAP);
+ out[REG_HWCAP2] = rte_cpu_getauxval(AT_HWCAP2);
+}
+
+/*
+ * Checks if a particular flag is available on current machine.
+ */
+int
+rte_cpu_get_flag_enabled(enum rte_cpu_flag_t feature)
+{
+ const struct feature_entry *feat;
+ hwcap_registers_t regs = {0};
+
+ if (feature >= RTE_CPUFLAG_NUMFLAGS)
+ return -ENOENT;
+
+ feat = &rte_cpu_feature_table[feature];
+ if (feat->reg == REG_NONE)
+ return -EFAULT;
+
+ rte_cpu_get_features(regs);
+ return (regs[feat->reg] >> feat->bit) & 1;
+}
+
+const char *
+rte_cpu_get_flag_name(enum rte_cpu_flag_t feature)
+{
+ if (feature >= RTE_CPUFLAG_NUMFLAGS)
+ return NULL;
+ return rte_cpu_feature_table[feature].name;
+}
diff --git a/lib/librte_eal/common/arch/s390x/rte_cycles.c b/lib/librte_eal/common/arch/s390x/rte_cycles.c
new file mode 100644
index 000000000..b29c4454a
--- /dev/null
+++ b/lib/librte_eal/common/arch/s390x/rte_cycles.c
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * (c) Copyright IBM Corp. 2018, 2019
+ */
+
+#include "eal_private.h"
+
+uint64_t
+get_tsc_freq_arch(void)
+{
+ return 0;
+}
diff --git a/lib/librte_eal/common/arch/s390x/rte_hypervisor.c b/lib/librte_eal/common/arch/s390x/rte_hypervisor.c
new file mode 100644
index 000000000..22b0c5cc4
--- /dev/null
+++ b/lib/librte_eal/common/arch/s390x/rte_hypervisor.c
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * (c) Copyright IBM Corp. 2018, 2019
+ */
+
+#include "rte_hypervisor.h"
+
+enum rte_hypervisor
+rte_hypervisor_get(void)
+{
+ return RTE_HYPERVISOR_UNKNOWN;
+}
diff --git a/lib/librte_eal/common/include/arch/s390x/rte_atomic.h b/lib/librte_eal/common/include/arch/s390x/rte_atomic.h
new file mode 100644
index 000000000..5fce6d5f0
--- /dev/null
+++ b/lib/librte_eal/common/include/arch/s390x/rte_atomic.h
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * (c) Copyright IBM Corp. 2018, 2019
+ */
+
+#ifndef _RTE_ATOMIC_S390X_H_
+#define _RTE_ATOMIC_S390X_H_
+
+#ifndef RTE_FORCE_INTRINSICS
+# error Platform must be built with CONFIG_RTE_FORCE_INTRINSICS
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "generic/rte_atomic.h"
+
+//#define dsb(opt) asm volatile("" : : : "memory")
+//#define dmb(opt) asm volatile("" : : : "memory")
+
+#define rte_mb() rte_compiler_barrier() //asm volatile("" : : : "memory")
+
+#define rte_wmb() rte_mb()
+
+#define rte_rmb() rte_mb()
+
+#define rte_smp_mb() rte_mb()
+
+#define rte_smp_wmb() rte_wmb()
+
+#define rte_smp_rmb() rte_rmb()
+
+#define rte_io_mb() rte_mb()
+
+#define rte_io_wmb() rte_wmb()
+
+#define rte_io_rmb() rte_rmb()
+
+#define rte_cio_wmb() rte_wmb()
+
+#define rte_cio_rmb() rte_rmb()
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_ATOMIC_S390X_H_ */
diff --git a/lib/librte_eal/common/include/arch/s390x/rte_byteorder.h b/lib/librte_eal/common/include/arch/s390x/rte_byteorder.h
new file mode 100644
index 000000000..de6e410b4
--- /dev/null
+++ b/lib/librte_eal/common/include/arch/s390x/rte_byteorder.h
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * (c) Copyright IBM Corp. 2018, 2019
+ */
+
+/* Inspired from FreeBSD src/sys/powerpc/include/endian.h
+ * Copyright (c) 1987, 1991, 1993
+ * The Regents of the University of California. All rights reserved.
+ */
+
+#ifndef _RTE_BYTEORDER_S390X_H_
+#define _RTE_BYTEORDER_S390X_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+#include "generic/rte_byteorder.h"
+
+/* s390x is big endian
+ */
+
+#define rte_cpu_to_le_16(x) rte_bswap16(x)
+#define rte_cpu_to_le_32(x) rte_bswap32(x)
+#define rte_cpu_to_le_64(x) rte_bswap64(x)
+
+#define rte_cpu_to_be_16(x) (x)
+#define rte_cpu_to_be_32(x) (x)
+#define rte_cpu_to_be_64(x) (x)
+
+#define rte_le_to_cpu_16(x) rte_bswap16(x)
+#define rte_le_to_cpu_32(x) rte_bswap32(x)
+#define rte_le_to_cpu_64(x) rte_bswap64(x)
+
+#define rte_be_to_cpu_16(x) (x)
+#define rte_be_to_cpu_32(x) (x)
+#define rte_be_to_cpu_64(x) (x)
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_BYTEORDER_S390X_H_ */
diff --git a/lib/librte_eal/common/include/arch/s390x/rte_cpuflags.h b/lib/librte_eal/common/include/arch/s390x/rte_cpuflags.h
new file mode 100644
index 000000000..bfeff3f98
--- /dev/null
+++ b/lib/librte_eal/common/include/arch/s390x/rte_cpuflags.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * (c) Copyright IBM Corp. 2018, 2019
+ */
+
+#ifndef _RTE_CPUFLAGS_S390X_H_
+#define _RTE_CPUFLAGS_S390X_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Enumeration of all CPU features supported
+ */
+enum rte_cpu_flag_t {
+ RTE_CPUFLAG_ESAN3 = 0,
+ RTE_CPUFLAG_ZARCH,
+ RTE_CPUFLAG_STFLE,
+ RTE_CPUFLAG_MSA,
+ RTE_CPUFLAG_LDISP,
+ RTE_CPUFLAG_EIMM,
+ RTE_CPUFLAG_DFP,
+ RTE_CPUFLAG_HPAGE, //from elf.h
+ //RTE_CPUFLAG_EDAT, //from hwcap.h
+ RTE_CPUFLAG_ETF3EH,
+ RTE_CPUFLAG_HIGH_GPRS,
+ RTE_CPUFLAG_TE,
+ RTE_CPUFLAG_VXRS,
+ RTE_CPUFLAG_VXRS_BCD,
+ RTE_CPUFLAG_VXRS_EXT,
+ RTE_CPUFLAG_GS,
+ /* The last item */
+ RTE_CPUFLAG_NUMFLAGS,/**< This should always be the last! */
+};
+
+#include "generic/rte_cpuflags.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_CPUFLAGS_S390X_H_ */
diff --git a/lib/librte_eal/common/include/arch/s390x/rte_cycles.h b/lib/librte_eal/common/include/arch/s390x/rte_cycles.h
new file mode 100644
index 000000000..211bbe448
--- /dev/null
+++ b/lib/librte_eal/common/include/arch/s390x/rte_cycles.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * (c) Copyright IBM Corp. 2018, 2019
+ */
+
+#ifndef _RTE_CYCLES_S390X_H_
+#define _RTE_CYCLES_S390X_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "generic/rte_cycles.h"
+
+#include <rte_common.h>
+
+/**
+ * Read the time base register.
+ *
+ * @return
+ * The time base for this lcore.
+ */
+static inline uint64_t
+rte_rdtsc(void)
+{
+ uint64_t tsc;
+ asm volatile("stck %0" : "=Q"(tsc) : : "cc");
+ return tsc;
+}
+
+static inline uint64_t
+rte_rdtsc_precise(void)
+{
+ rte_mb();
+ return rte_rdtsc();
+}
+
+static inline uint64_t
+rte_get_tsc_cycles(void) { return rte_rdtsc(); }
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_CYCLES_S390X_H_ */
diff --git a/lib/librte_eal/common/include/arch/s390x/rte_io.h b/lib/librte_eal/common/include/arch/s390x/rte_io.h
new file mode 100644
index 000000000..e6b718ef3
--- /dev/null
+++ b/lib/librte_eal/common/include/arch/s390x/rte_io.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * (c) Copyright IBM Corp. 2018, 2019
+ */
+
+#ifndef _RTE_IO_S390X_H_
+#define _RTE_IO_S390X_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "generic/rte_io.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_IO_S390X_H_ */
diff --git a/lib/librte_eal/common/include/arch/s390x/rte_memcpy.h b/lib/librte_eal/common/include/arch/s390x/rte_memcpy.h
new file mode 100644
index 000000000..1135b1af6
--- /dev/null
+++ b/lib/librte_eal/common/include/arch/s390x/rte_memcpy.h
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * (c) Copyright IBM Corp. 2018, 2019
+ */
+
+#ifndef _RTE_MEMCPY_S390X_H_
+#define _RTE_MEMCPY_S390X_H_
+
+#include <stdint.h>
+#include <string.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "generic/rte_memcpy.h"
+
+
+static inline void
+rte_mov16(uint8_t *dst, const uint8_t *src)
+{
+ memcpy(dst, src, 16);
+}
+static inline void
+rte_mov32(uint8_t *dst, const uint8_t *src)
+{
+ memcpy(dst, src, 32);
+}
+static inline void
+rte_mov48(uint8_t *dst, const uint8_t *src)
+{
+ memcpy(dst, src, 48);
+}
+static inline void
+rte_mov64(uint8_t *dst, const uint8_t *src)
+{
+ memcpy(dst, src, 64);
+}
+static inline void
+rte_mov128(uint8_t *dst, const uint8_t *src)
+{
+ memcpy(dst, src, 128);
+}
+static inline void
+rte_mov256(uint8_t *dst, const uint8_t *src)
+{
+ memcpy(dst, src, 256);
+}
+#define rte_memcpy(d, s, n) memcpy((d), (s), (n))
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_MEMCPY_S390X_H_ */
diff --git a/lib/librte_eal/common/include/arch/s390x/rte_pause.h b/lib/librte_eal/common/include/arch/s390x/rte_pause.h
new file mode 100644
index 000000000..be90ce6a1
--- /dev/null
+++ b/lib/librte_eal/common/include/arch/s390x/rte_pause.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * (c) Copyright IBM Corp. 2018, 2019
+ */
+
+#ifndef _RTE_PAUSE_S390X_H_
+#define _RTE_PAUSE_S390X_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "generic/rte_pause.h"
+
+static inline void rte_pause(void)
+{
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_PAUSE_S390X_H_ */
diff --git a/lib/librte_eal/common/include/arch/s390x/rte_prefetch.h b/lib/librte_eal/common/include/arch/s390x/rte_prefetch.h
new file mode 100644
index 000000000..c76c6d898
--- /dev/null
+++ b/lib/librte_eal/common/include/arch/s390x/rte_prefetch.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * (c) Copyright IBM Corp. 2018, 2019
+ */
+
+#ifndef _RTE_PREFETCH_S390X_H_
+#define _RTE_PREFETCH_S390X_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <rte_common.h>
+#include "generic/rte_prefetch.h"
+
+static inline void rte_prefetch0(const volatile void *p)
+{
+ asm volatile ("pfd 1, 0(%[p])" : : [p] "r" (p));
+}
+
+static inline void rte_prefetch1(const volatile void *p)
+{
+ asm volatile ("pfd 1, 0(%[p])" : : [p] "r" (p));
+}
+
+static inline void rte_prefetch2(const volatile void *p)
+{
+ asm volatile ("pfd 1, 0(%[p])" : : [p] "r" (p));
+}
+
+static inline void rte_prefetch_non_temporal(const volatile void *p)
+{
+ /* non-temporal version not available, fallback to rte_prefetch0 */
+ rte_prefetch0(p);
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_PREFETCH_S390X_H_ */
diff --git a/lib/librte_eal/common/include/arch/s390x/rte_rwlock.h b/lib/librte_eal/common/include/arch/s390x/rte_rwlock.h
new file mode 100644
index 000000000..f649484f3
--- /dev/null
+++ b/lib/librte_eal/common/include/arch/s390x/rte_rwlock.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * (c) Copyright IBM Corp. 2018, 2019
+ */
+
+#ifndef _RTE_RWLOCK_S390X_H_
+#define _RTE_RWLOCK_S390X_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "generic/rte_rwlock.h"
+
+static inline void
+rte_rwlock_read_lock_tm(rte_rwlock_t *rwl)
+{
+ rte_rwlock_read_lock(rwl);
+}
+
+static inline void
+rte_rwlock_read_unlock_tm(rte_rwlock_t *rwl)
+{
+ rte_rwlock_read_unlock(rwl);
+}
+
+static inline void
+rte_rwlock_write_lock_tm(rte_rwlock_t *rwl)
+{
+ rte_rwlock_write_lock(rwl);
+}
+
+static inline void
+rte_rwlock_write_unlock_tm(rte_rwlock_t *rwl)
+{
+ rte_rwlock_write_unlock(rwl);
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_RWLOCK_S390X_H_ */
diff --git a/lib/librte_eal/common/include/arch/s390x/rte_spinlock.h b/lib/librte_eal/common/include/arch/s390x/rte_spinlock.h
new file mode 100644
index 000000000..0434864fb
--- /dev/null
+++ b/lib/librte_eal/common/include/arch/s390x/rte_spinlock.h
@@ -0,0 +1,85 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * (c) Copyright IBM Corp. 2018, 2019
+ */
+
+#ifndef _RTE_SPINLOCK_S390X_H_
+#define _RTE_SPINLOCK_S390X_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <rte_common.h>
+#include "generic/rte_spinlock.h"
+
+#ifndef RTE_FORCE_INTRINSICS
+
+static inline void
+rte_spinlock_lock(rte_spinlock_t *sl)
+{
+ while (__sync_lock_test_and_set(&sl->locked, 1))
+ while (sl->locked)
+ rte_pause();
+}
+
+static inline void
+rte_spinlock_unlock(rte_spinlock_t *sl)
+{
+ __sync_lock_release(&sl->locked);
+}
+
+static inline int
+rte_spinlock_trylock(rte_spinlock_t *sl)
+{
+ return __sync_lock_test_and_set(&sl->locked, 1) == 0;
+}
+
+#endif
+
+
+static inline int rte_tm_supported(void)
+{
+ return 0;
+}
+
+static inline void
+rte_spinlock_lock_tm(rte_spinlock_t *sl)
+{
+ rte_spinlock_lock(sl); /* fall-back */
+}
+
+static inline int
+rte_spinlock_trylock_tm(rte_spinlock_t *sl)
+{
+ return rte_spinlock_trylock(sl);
+}
+
+static inline void
+rte_spinlock_unlock_tm(rte_spinlock_t *sl)
+{
+ rte_spinlock_unlock(sl);
+}
+
+static inline void
+rte_spinlock_recursive_lock_tm(rte_spinlock_recursive_t *slr)
+{
+ rte_spinlock_recursive_lock(slr); /* fall-back */
+}
+
+static inline void
+rte_spinlock_recursive_unlock_tm(rte_spinlock_recursive_t *slr)
+{
+ rte_spinlock_recursive_unlock(slr);
+}
+
+static inline int
+rte_spinlock_recursive_trylock_tm(rte_spinlock_recursive_t *slr)
+{
+ return rte_spinlock_recursive_trylock(slr);
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_SPINLOCK_S390X_H_ */
diff --git a/lib/librte_eal/common/include/arch/s390x/rte_ticketlock.h b/lib/librte_eal/common/include/arch/s390x/rte_ticketlock.h
new file mode 100644
index 000000000..0785363c9
--- /dev/null
+++ b/lib/librte_eal/common/include/arch/s390x/rte_ticketlock.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * (c) Copyright IBM Corp. 2019
+ */
+
+#ifndef _RTE_TICKETLOCK_S390X_H_
+#define _RTE_TICKETLOCK_S390X_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "generic/rte_ticketlock.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_TICKETLOCK_S390X_H_ */
diff --git a/lib/librte_eal/common/include/arch/s390x/rte_vect.h b/lib/librte_eal/common/include/arch/s390x/rte_vect.h
new file mode 100644
index 000000000..459744aa4
--- /dev/null
+++ b/lib/librte_eal/common/include/arch/s390x/rte_vect.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * (c) Copyright IBM Corp. 2018, 2019
+ */
+
+#ifndef _RTE_VECT_S390X_H_
+#define _RTE_VECT_S390X_H_
+
+#include <vecintrin.h>
+#include "generic/rte_vect.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef int xmm_t __attribute__((vector_size(4*sizeof(int))));
+
+#define XMM_SIZE (sizeof(xmm_t))
+#define XMM_MASK (XMM_SIZE - 1)
+
+typedef union rte_xmm {
+ xmm_t x;
+ uint8_t u8[XMM_SIZE / sizeof(uint8_t)];
+ uint16_t u16[XMM_SIZE / sizeof(uint16_t)];
+ uint32_t u32[XMM_SIZE / sizeof(uint32_t)];
+ uint64_t u64[XMM_SIZE / sizeof(uint64_t)];
+ double pd[XMM_SIZE / sizeof(double)];
+} __attribute__((aligned(16))) rte_xmm_t;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_VECT_S390X_H_ */
--
2.17.1
^ permalink raw reply [flat|nested] 80+ messages in thread
* [dpdk-dev] [RFC 03/12] acl: add support for s390x architecture
2019-04-09 19:06 [dpdk-dev] [RFC 00/12] introduce s390x architecture Vivian Kong
` (2 preceding siblings ...)
2019-04-09 19:06 ` [dpdk-dev] [RFC 02/12] eal: add support for " Vivian Kong
@ 2019-04-09 19:06 ` Vivian Kong
2019-04-09 19:06 ` Vivian Kong
2019-04-09 19:06 ` [dpdk-dev] [RFC 04/12] lpm: " Vivian Kong
` (11 subsequent siblings)
15 siblings, 1 reply; 80+ messages in thread
From: Vivian Kong @ 2019-04-09 19:06 UTC (permalink / raw)
To: dev
Add big endian support for s390x architecture.
Signed-off-by: Vivian Kong <vivkong@ca.ibm.com>
---
app/test-acl/main.c | 4 ++
lib/librte_acl/Makefile | 2 +
lib/librte_acl/acl_bld.c | 69 +++++++++++++++++++++++++++------
lib/librte_acl/acl_gen.c | 9 +++++
lib/librte_acl/acl_run_scalar.c | 8 ++++
lib/librte_acl/rte_acl.c | 4 ++
lib/librte_acl/rte_acl.h | 1 +
7 files changed, 85 insertions(+), 12 deletions(-)
diff --git a/app/test-acl/main.c b/app/test-acl/main.c
index b80179417..b6c5c9abd 100644
--- a/app/test-acl/main.c
+++ b/app/test-acl/main.c
@@ -81,6 +81,10 @@ static const struct acl_alg acl_alg[] = {
.name = "altivec",
.alg = RTE_ACL_CLASSIFY_ALTIVEC,
},
+ {
+ .name = "s390x",
+ .alg = RTE_ACL_CLASSIFY_S390X,
+ },
};
static struct {
diff --git a/lib/librte_acl/Makefile b/lib/librte_acl/Makefile
index ea5edf00a..f87693d1e 100644
--- a/lib/librte_acl/Makefile
+++ b/lib/librte_acl/Makefile
@@ -30,6 +30,8 @@ CFLAGS_acl_run_neon.o += -Wno-maybe-uninitialized
endif
else ifeq ($(CONFIG_RTE_ARCH_PPC_64),y)
SRCS-$(CONFIG_RTE_LIBRTE_ACL) += acl_run_altivec.c
+else ifeq ($(CONFIG_RTE_ARCH_S390X),y)
+SRCS-$(CONFIG_RTE_LIBRTE_ACL) +=
else
SRCS-$(CONFIG_RTE_LIBRTE_ACL) += acl_run_sse.c
endif
diff --git a/lib/librte_acl/acl_bld.c b/lib/librte_acl/acl_bld.c
index b82191f42..16bf09304 100644
--- a/lib/librte_acl/acl_bld.c
+++ b/lib/librte_acl/acl_bld.c
@@ -777,6 +777,16 @@ acl_build_reset(struct rte_acl_ctx *ctx)
sizeof(*ctx) - offsetof(struct rte_acl_ctx, num_categories));
}
+static uint32_t get_le_byte_index(uint32_t index, int size)
+{
+#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
+ (void) size;
+ return index;
+#else
+ return size - 1 - index;
+#endif
+}
+
static void
acl_gen_range(struct acl_build_context *context,
const uint8_t *hi, const uint8_t *lo, int size, int level,
@@ -786,12 +796,19 @@ acl_gen_range(struct acl_build_context *context,
uint32_t n;
prev = root;
+
+ /* On big endian min and max point to highest byte.
+ * Therefore iterate in opposite direction as on
+ * little endian with helper function.
+ */
for (n = size - 1; n > 0; n--) {
+ uint32_t le_idx = get_le_byte_index(n, size);
node = acl_alloc_node(context, level++);
- acl_add_ptr_range(context, prev, node, lo[n], hi[n]);
+ acl_add_ptr_range(context, prev, node, lo[le_idx], hi[le_idx]);
prev = node;
}
- acl_add_ptr_range(context, prev, end, lo[0], hi[0]);
+ const uint32_t first_idx = get_le_byte_index(0, size);
+ acl_add_ptr_range(context, prev, end, lo[first_idx], hi[first_idx]);
}
static struct rte_acl_node *
@@ -804,10 +821,16 @@ acl_gen_range_trie(struct acl_build_context *context,
const uint8_t *lo = min;
const uint8_t *hi = max;
+ /* On big endian min and max point to highest byte.
+ * Therefore iterate in opposite direction as on
+ * little endian.
+ */
+ const int byte_index = get_le_byte_index(size-1, size);
+
*pend = acl_alloc_node(context, level+size);
root = acl_alloc_node(context, level++);
- if (lo[size - 1] == hi[size - 1]) {
+ if (lo[byte_index] == hi[byte_index]) {
acl_gen_range(context, hi, lo, size, level, root, *pend);
} else {
uint8_t limit_lo[64];
@@ -819,27 +842,29 @@ acl_gen_range_trie(struct acl_build_context *context,
memset(limit_hi, UINT8_MAX, RTE_DIM(limit_hi));
for (n = size - 2; n >= 0; n--) {
- hi_ff = (uint8_t)(hi_ff & hi[n]);
- lo_00 = (uint8_t)(lo_00 | lo[n]);
+ const uint32_t le_idx = get_le_byte_index(n, size);
+ hi_ff = (uint8_t)(hi_ff & hi[le_idx]);
+ lo_00 = (uint8_t)(lo_00 | lo[le_idx]);
}
if (hi_ff != UINT8_MAX) {
- limit_lo[size - 1] = hi[size - 1];
+ limit_lo[byte_index] = hi[byte_index];
acl_gen_range(context, hi, limit_lo, size, level,
root, *pend);
}
if (lo_00 != 0) {
- limit_hi[size - 1] = lo[size - 1];
+ limit_hi[byte_index] = lo[byte_index];
acl_gen_range(context, limit_hi, lo, size, level,
root, *pend);
}
- if (hi[size - 1] - lo[size - 1] > 1 ||
+ if (hi[byte_index] - lo[byte_index] > 1 ||
lo_00 == 0 ||
hi_ff == UINT8_MAX) {
- limit_lo[size-1] = (uint8_t)(lo[size-1] + (lo_00 != 0));
- limit_hi[size-1] = (uint8_t)(hi[size-1] -
+ limit_lo[byte_index] = (uint8_t)(lo[byte_index] +
+ (lo_00 != 0));
+ limit_hi[byte_index] = (uint8_t)(hi[byte_index] -
(hi_ff != UINT8_MAX));
acl_gen_range(context, limit_hi, limit_lo, size,
level, root, *pend);
@@ -863,13 +888,17 @@ acl_gen_mask_trie(struct acl_build_context *context,
root = acl_alloc_node(context, level++);
prev = root;
+ /* On big endian val and msk point to highest byte.
+ * Therefore iterate in opposite direction as on
+ * little endian with helper function
+ */
for (n = size - 1; n >= 0; n--) {
+ uint32_t le_idx = get_le_byte_index(n, size);
node = acl_alloc_node(context, level++);
- acl_gen_mask(&bits, val[n] & msk[n], msk[n]);
+ acl_gen_mask(&bits, val[le_idx] & msk[le_idx], msk[le_idx]);
acl_add_ptr(context, prev, node, &bits);
prev = node;
}
-
*pend = prev;
return root;
}
@@ -927,6 +956,14 @@ build_trie(struct acl_build_context *context, struct rte_acl_build_rule *head,
fld->mask_range.u32,
rule->config->defs[n].size);
+ /* Fields are aligned highest to lowest bit.
+ * Masked needs to be shifted to follow same
+ * convention
+ */
+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
+ mask = mask << 32;
+#endif
+
/* gen a mini-trie for this field */
merge = acl_gen_mask_trie(context,
&fld->value,
@@ -1017,6 +1054,14 @@ acl_calc_wildness(struct rte_acl_build_rule *head,
uint32_t bit_len = CHAR_BIT * config->defs[n].size;
uint64_t msk_val = RTE_LEN2MASK(bit_len,
typeof(msk_val));
+
+ /* Fields are aligned highest to lowest bit.
+ * Masked needs to be shifted to follow same
+ * convention
+ */
+ if (__BYTE_ORDER__ == __ORDER_BIG_ENDIAN__)
+ msk_val <<= 32;
+
double size = bit_len;
int field_index = config->defs[n].field_index;
const struct rte_acl_field *fld = rule->f->field +
diff --git a/lib/librte_acl/acl_gen.c b/lib/librte_acl/acl_gen.c
index 35a0140b4..b4e8df0ce 100644
--- a/lib/librte_acl/acl_gen.c
+++ b/lib/librte_acl/acl_gen.c
@@ -360,7 +360,16 @@ acl_gen_node(struct rte_acl_node *node, uint64_t *node_array,
array_ptr = &node_array[index->quad_index];
acl_add_ptrs(node, array_ptr, no_match, 0);
qtrp = (uint32_t *)node->transitions;
+
+ /* Swap qtrp on big endian that transitions[0]
+ * is at least signifcant byte.
+ */
+#if __BYTE_ORDER == __ORDER_BIG_ENDIAN__
+ node->node_index = __bswap_32(qtrp[0]);
+#else
node->node_index = qtrp[0];
+#endif
+
node->node_index <<= sizeof(index->quad_index) * CHAR_BIT;
node->node_index |= index->quad_index | node->node_type;
index->quad_index += node->fanout;
diff --git a/lib/librte_acl/acl_run_scalar.c b/lib/librte_acl/acl_run_scalar.c
index 3d61e7940..9f01ef8d8 100644
--- a/lib/librte_acl/acl_run_scalar.c
+++ b/lib/librte_acl/acl_run_scalar.c
@@ -141,6 +141,14 @@ rte_acl_classify_scalar(const struct rte_acl_ctx *ctx, const uint8_t **data,
input0 = GET_NEXT_4BYTES(parms, 0);
input1 = GET_NEXT_4BYTES(parms, 1);
+ /* input needs to be swapped because the rules get
+ * swapped while building the trie.
+ */
+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
+ input0 = __bswap_32(input0);
+ input1 = __bswap_32(input1);
+#endif
+
for (n = 0; n < 4; n++) {
transition0 = scalar_transition(flows.trans,
diff --git a/lib/librte_acl/rte_acl.c b/lib/librte_acl/rte_acl.c
index c436a9bfd..6d4d3f239 100644
--- a/lib/librte_acl/rte_acl.c
+++ b/lib/librte_acl/rte_acl.c
@@ -64,6 +64,8 @@ static const rte_acl_classify_t classify_fns[] = {
[RTE_ACL_CLASSIFY_AVX2] = rte_acl_classify_avx2,
[RTE_ACL_CLASSIFY_NEON] = rte_acl_classify_neon,
[RTE_ACL_CLASSIFY_ALTIVEC] = rte_acl_classify_altivec,
+ /* use scalar for s390x for now */
+ [RTE_ACL_CLASSIFY_S390X] = rte_acl_classify_scalar,
};
/* by default, use always available scalar code path. */
@@ -103,6 +105,8 @@ RTE_INIT(rte_acl_init)
alg = RTE_ACL_CLASSIFY_NEON;
#elif defined(RTE_ARCH_PPC_64)
alg = RTE_ACL_CLASSIFY_ALTIVEC;
+#elif defined(RTE_ARCH_S390X)
+ alg = RTE_ACL_CLASSIFY_S390X;
#else
#ifdef CC_AVX2_SUPPORT
if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_AVX2))
diff --git a/lib/librte_acl/rte_acl.h b/lib/librte_acl/rte_acl.h
index aa22e70c6..9537196db 100644
--- a/lib/librte_acl/rte_acl.h
+++ b/lib/librte_acl/rte_acl.h
@@ -241,6 +241,7 @@ enum rte_acl_classify_alg {
RTE_ACL_CLASSIFY_AVX2 = 3, /**< requires AVX2 support. */
RTE_ACL_CLASSIFY_NEON = 4, /**< requires NEON support. */
RTE_ACL_CLASSIFY_ALTIVEC = 5, /**< requires ALTIVEC support. */
+ RTE_ACL_CLASSIFY_S390X = 6, /**< requires s390x z13 support. */
RTE_ACL_CLASSIFY_NUM /* should always be the last one. */
};
--
2.17.1
^ permalink raw reply [flat|nested] 80+ messages in thread
* [dpdk-dev] [RFC 03/12] acl: add support for s390x architecture
2019-04-09 19:06 ` [dpdk-dev] [RFC 03/12] acl: " Vivian Kong
@ 2019-04-09 19:06 ` Vivian Kong
0 siblings, 0 replies; 80+ messages in thread
From: Vivian Kong @ 2019-04-09 19:06 UTC (permalink / raw)
To: dev
Add big endian support for s390x architecture.
Signed-off-by: Vivian Kong <vivkong@ca.ibm.com>
---
app/test-acl/main.c | 4 ++
lib/librte_acl/Makefile | 2 +
lib/librte_acl/acl_bld.c | 69 +++++++++++++++++++++++++++------
lib/librte_acl/acl_gen.c | 9 +++++
lib/librte_acl/acl_run_scalar.c | 8 ++++
lib/librte_acl/rte_acl.c | 4 ++
lib/librte_acl/rte_acl.h | 1 +
7 files changed, 85 insertions(+), 12 deletions(-)
diff --git a/app/test-acl/main.c b/app/test-acl/main.c
index b80179417..b6c5c9abd 100644
--- a/app/test-acl/main.c
+++ b/app/test-acl/main.c
@@ -81,6 +81,10 @@ static const struct acl_alg acl_alg[] = {
.name = "altivec",
.alg = RTE_ACL_CLASSIFY_ALTIVEC,
},
+ {
+ .name = "s390x",
+ .alg = RTE_ACL_CLASSIFY_S390X,
+ },
};
static struct {
diff --git a/lib/librte_acl/Makefile b/lib/librte_acl/Makefile
index ea5edf00a..f87693d1e 100644
--- a/lib/librte_acl/Makefile
+++ b/lib/librte_acl/Makefile
@@ -30,6 +30,8 @@ CFLAGS_acl_run_neon.o += -Wno-maybe-uninitialized
endif
else ifeq ($(CONFIG_RTE_ARCH_PPC_64),y)
SRCS-$(CONFIG_RTE_LIBRTE_ACL) += acl_run_altivec.c
+else ifeq ($(CONFIG_RTE_ARCH_S390X),y)
+SRCS-$(CONFIG_RTE_LIBRTE_ACL) +=
else
SRCS-$(CONFIG_RTE_LIBRTE_ACL) += acl_run_sse.c
endif
diff --git a/lib/librte_acl/acl_bld.c b/lib/librte_acl/acl_bld.c
index b82191f42..16bf09304 100644
--- a/lib/librte_acl/acl_bld.c
+++ b/lib/librte_acl/acl_bld.c
@@ -777,6 +777,16 @@ acl_build_reset(struct rte_acl_ctx *ctx)
sizeof(*ctx) - offsetof(struct rte_acl_ctx, num_categories));
}
+static uint32_t get_le_byte_index(uint32_t index, int size)
+{
+#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
+ (void) size;
+ return index;
+#else
+ return size - 1 - index;
+#endif
+}
+
static void
acl_gen_range(struct acl_build_context *context,
const uint8_t *hi, const uint8_t *lo, int size, int level,
@@ -786,12 +796,19 @@ acl_gen_range(struct acl_build_context *context,
uint32_t n;
prev = root;
+
+ /* On big endian min and max point to highest byte.
+ * Therefore iterate in opposite direction as on
+ * little endian with helper function.
+ */
for (n = size - 1; n > 0; n--) {
+ uint32_t le_idx = get_le_byte_index(n, size);
node = acl_alloc_node(context, level++);
- acl_add_ptr_range(context, prev, node, lo[n], hi[n]);
+ acl_add_ptr_range(context, prev, node, lo[le_idx], hi[le_idx]);
prev = node;
}
- acl_add_ptr_range(context, prev, end, lo[0], hi[0]);
+ const uint32_t first_idx = get_le_byte_index(0, size);
+ acl_add_ptr_range(context, prev, end, lo[first_idx], hi[first_idx]);
}
static struct rte_acl_node *
@@ -804,10 +821,16 @@ acl_gen_range_trie(struct acl_build_context *context,
const uint8_t *lo = min;
const uint8_t *hi = max;
+ /* On big endian min and max point to highest byte.
+ * Therefore iterate in opposite direction as on
+ * little endian.
+ */
+ const int byte_index = get_le_byte_index(size-1, size);
+
*pend = acl_alloc_node(context, level+size);
root = acl_alloc_node(context, level++);
- if (lo[size - 1] == hi[size - 1]) {
+ if (lo[byte_index] == hi[byte_index]) {
acl_gen_range(context, hi, lo, size, level, root, *pend);
} else {
uint8_t limit_lo[64];
@@ -819,27 +842,29 @@ acl_gen_range_trie(struct acl_build_context *context,
memset(limit_hi, UINT8_MAX, RTE_DIM(limit_hi));
for (n = size - 2; n >= 0; n--) {
- hi_ff = (uint8_t)(hi_ff & hi[n]);
- lo_00 = (uint8_t)(lo_00 | lo[n]);
+ const uint32_t le_idx = get_le_byte_index(n, size);
+ hi_ff = (uint8_t)(hi_ff & hi[le_idx]);
+ lo_00 = (uint8_t)(lo_00 | lo[le_idx]);
}
if (hi_ff != UINT8_MAX) {
- limit_lo[size - 1] = hi[size - 1];
+ limit_lo[byte_index] = hi[byte_index];
acl_gen_range(context, hi, limit_lo, size, level,
root, *pend);
}
if (lo_00 != 0) {
- limit_hi[size - 1] = lo[size - 1];
+ limit_hi[byte_index] = lo[byte_index];
acl_gen_range(context, limit_hi, lo, size, level,
root, *pend);
}
- if (hi[size - 1] - lo[size - 1] > 1 ||
+ if (hi[byte_index] - lo[byte_index] > 1 ||
lo_00 == 0 ||
hi_ff == UINT8_MAX) {
- limit_lo[size-1] = (uint8_t)(lo[size-1] + (lo_00 != 0));
- limit_hi[size-1] = (uint8_t)(hi[size-1] -
+ limit_lo[byte_index] = (uint8_t)(lo[byte_index] +
+ (lo_00 != 0));
+ limit_hi[byte_index] = (uint8_t)(hi[byte_index] -
(hi_ff != UINT8_MAX));
acl_gen_range(context, limit_hi, limit_lo, size,
level, root, *pend);
@@ -863,13 +888,17 @@ acl_gen_mask_trie(struct acl_build_context *context,
root = acl_alloc_node(context, level++);
prev = root;
+ /* On big endian val and msk point to highest byte.
+ * Therefore iterate in opposite direction as on
+ * little endian with helper function
+ */
for (n = size - 1; n >= 0; n--) {
+ uint32_t le_idx = get_le_byte_index(n, size);
node = acl_alloc_node(context, level++);
- acl_gen_mask(&bits, val[n] & msk[n], msk[n]);
+ acl_gen_mask(&bits, val[le_idx] & msk[le_idx], msk[le_idx]);
acl_add_ptr(context, prev, node, &bits);
prev = node;
}
-
*pend = prev;
return root;
}
@@ -927,6 +956,14 @@ build_trie(struct acl_build_context *context, struct rte_acl_build_rule *head,
fld->mask_range.u32,
rule->config->defs[n].size);
+ /* Fields are aligned highest to lowest bit.
+ * Masked needs to be shifted to follow same
+ * convention
+ */
+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
+ mask = mask << 32;
+#endif
+
/* gen a mini-trie for this field */
merge = acl_gen_mask_trie(context,
&fld->value,
@@ -1017,6 +1054,14 @@ acl_calc_wildness(struct rte_acl_build_rule *head,
uint32_t bit_len = CHAR_BIT * config->defs[n].size;
uint64_t msk_val = RTE_LEN2MASK(bit_len,
typeof(msk_val));
+
+ /* Fields are aligned highest to lowest bit.
+ * Masked needs to be shifted to follow same
+ * convention
+ */
+ if (__BYTE_ORDER__ == __ORDER_BIG_ENDIAN__)
+ msk_val <<= 32;
+
double size = bit_len;
int field_index = config->defs[n].field_index;
const struct rte_acl_field *fld = rule->f->field +
diff --git a/lib/librte_acl/acl_gen.c b/lib/librte_acl/acl_gen.c
index 35a0140b4..b4e8df0ce 100644
--- a/lib/librte_acl/acl_gen.c
+++ b/lib/librte_acl/acl_gen.c
@@ -360,7 +360,16 @@ acl_gen_node(struct rte_acl_node *node, uint64_t *node_array,
array_ptr = &node_array[index->quad_index];
acl_add_ptrs(node, array_ptr, no_match, 0);
qtrp = (uint32_t *)node->transitions;
+
+ /* Swap qtrp on big endian that transitions[0]
+ * is at least signifcant byte.
+ */
+#if __BYTE_ORDER == __ORDER_BIG_ENDIAN__
+ node->node_index = __bswap_32(qtrp[0]);
+#else
node->node_index = qtrp[0];
+#endif
+
node->node_index <<= sizeof(index->quad_index) * CHAR_BIT;
node->node_index |= index->quad_index | node->node_type;
index->quad_index += node->fanout;
diff --git a/lib/librte_acl/acl_run_scalar.c b/lib/librte_acl/acl_run_scalar.c
index 3d61e7940..9f01ef8d8 100644
--- a/lib/librte_acl/acl_run_scalar.c
+++ b/lib/librte_acl/acl_run_scalar.c
@@ -141,6 +141,14 @@ rte_acl_classify_scalar(const struct rte_acl_ctx *ctx, const uint8_t **data,
input0 = GET_NEXT_4BYTES(parms, 0);
input1 = GET_NEXT_4BYTES(parms, 1);
+ /* input needs to be swapped because the rules get
+ * swapped while building the trie.
+ */
+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
+ input0 = __bswap_32(input0);
+ input1 = __bswap_32(input1);
+#endif
+
for (n = 0; n < 4; n++) {
transition0 = scalar_transition(flows.trans,
diff --git a/lib/librte_acl/rte_acl.c b/lib/librte_acl/rte_acl.c
index c436a9bfd..6d4d3f239 100644
--- a/lib/librte_acl/rte_acl.c
+++ b/lib/librte_acl/rte_acl.c
@@ -64,6 +64,8 @@ static const rte_acl_classify_t classify_fns[] = {
[RTE_ACL_CLASSIFY_AVX2] = rte_acl_classify_avx2,
[RTE_ACL_CLASSIFY_NEON] = rte_acl_classify_neon,
[RTE_ACL_CLASSIFY_ALTIVEC] = rte_acl_classify_altivec,
+ /* use scalar for s390x for now */
+ [RTE_ACL_CLASSIFY_S390X] = rte_acl_classify_scalar,
};
/* by default, use always available scalar code path. */
@@ -103,6 +105,8 @@ RTE_INIT(rte_acl_init)
alg = RTE_ACL_CLASSIFY_NEON;
#elif defined(RTE_ARCH_PPC_64)
alg = RTE_ACL_CLASSIFY_ALTIVEC;
+#elif defined(RTE_ARCH_S390X)
+ alg = RTE_ACL_CLASSIFY_S390X;
#else
#ifdef CC_AVX2_SUPPORT
if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_AVX2))
diff --git a/lib/librte_acl/rte_acl.h b/lib/librte_acl/rte_acl.h
index aa22e70c6..9537196db 100644
--- a/lib/librte_acl/rte_acl.h
+++ b/lib/librte_acl/rte_acl.h
@@ -241,6 +241,7 @@ enum rte_acl_classify_alg {
RTE_ACL_CLASSIFY_AVX2 = 3, /**< requires AVX2 support. */
RTE_ACL_CLASSIFY_NEON = 4, /**< requires NEON support. */
RTE_ACL_CLASSIFY_ALTIVEC = 5, /**< requires ALTIVEC support. */
+ RTE_ACL_CLASSIFY_S390X = 6, /**< requires s390x z13 support. */
RTE_ACL_CLASSIFY_NUM /* should always be the last one. */
};
--
2.17.1
^ permalink raw reply [flat|nested] 80+ messages in thread
* [dpdk-dev] [RFC 04/12] lpm: add support for s390x architecture
2019-04-09 19:06 [dpdk-dev] [RFC 00/12] introduce s390x architecture Vivian Kong
` (3 preceding siblings ...)
2019-04-09 19:06 ` [dpdk-dev] [RFC 03/12] acl: " Vivian Kong
@ 2019-04-09 19:06 ` Vivian Kong
2019-04-09 19:06 ` Vivian Kong
2019-04-09 19:06 ` [dpdk-dev] [RFC 05/12] examples/l3fwd: " Vivian Kong
` (10 subsequent siblings)
15 siblings, 1 reply; 80+ messages in thread
From: Vivian Kong @ 2019-04-09 19:06 UTC (permalink / raw)
To: dev
Add big endian support for s390x architecture.
Signed-off-by: Vivian Kong <vivkong@ca.ibm.com>
---
lib/librte_lpm/Makefile | 2 +
lib/librte_lpm/meson.build | 2 +-
lib/librte_lpm/rte_lpm.h | 2 +
lib/librte_lpm/rte_lpm6.c | 26 ++++++-
lib/librte_lpm/rte_lpm_s390x.h | 130 +++++++++++++++++++++++++++++++++
5 files changed, 157 insertions(+), 5 deletions(-)
create mode 100644 lib/librte_lpm/rte_lpm_s390x.h
diff --git a/lib/librte_lpm/Makefile b/lib/librte_lpm/Makefile
index a7946a1c5..16b868304 100644
--- a/lib/librte_lpm/Makefile
+++ b/lib/librte_lpm/Makefile
@@ -26,6 +26,8 @@ else ifeq ($(CONFIG_RTE_ARCH_X86),y)
SYMLINK-$(CONFIG_RTE_LIBRTE_LPM)-include += rte_lpm_sse.h
else ifeq ($(CONFIG_RTE_ARCH_PPC_64),y)
SYMLINK-$(CONFIG_RTE_LIBRTE_LPM)-include += rte_lpm_altivec.h
+else ifeq ($(CONFIG_RTE_ARCH_S390X),y)
+SYMLINK-$(CONFIG_RTE_LIBRTE_LPM)-include += rte_lpm_s390x.h
endif
include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/lib/librte_lpm/meson.build b/lib/librte_lpm/meson.build
index a5176d8ae..68317ed52 100644
--- a/lib/librte_lpm/meson.build
+++ b/lib/librte_lpm/meson.build
@@ -6,5 +6,5 @@ sources = files('rte_lpm.c', 'rte_lpm6.c')
headers = files('rte_lpm.h', 'rte_lpm6.h')
# since header files have different names, we can install all vector headers
# without worrying about which architecture we actually need
-headers += files('rte_lpm_altivec.h', 'rte_lpm_neon.h', 'rte_lpm_sse.h')
+headers += files('rte_lpm_s390x.h', 'rte_lpm_altivec.h', 'rte_lpm_neon.h', 'rte_lpm_sse.h')
deps += ['hash']
diff --git a/lib/librte_lpm/rte_lpm.h b/lib/librte_lpm/rte_lpm.h
index 21550444d..aa8a43968 100644
--- a/lib/librte_lpm/rte_lpm.h
+++ b/lib/librte_lpm/rte_lpm.h
@@ -459,6 +459,8 @@ rte_lpm_lookupx4(const struct rte_lpm *lpm, xmm_t ip, uint32_t hop[4],
#include "rte_lpm_neon.h"
#elif defined(RTE_ARCH_PPC_64)
#include "rte_lpm_altivec.h"
+#elif defined(RTE_ARCH_S390X)
+#include "rte_lpm_s390x.h"
#else
#include "rte_lpm_sse.h"
#endif
diff --git a/lib/librte_lpm/rte_lpm6.c b/lib/librte_lpm/rte_lpm6.c
index a91803113..7aead4035 100644
--- a/lib/librte_lpm/rte_lpm6.c
+++ b/lib/librte_lpm/rte_lpm6.c
@@ -1,6 +1,7 @@
/* SPDX-License-Identifier: BSD-3-Clause
* Copyright(c) 2010-2014 Intel Corporation
*/
+
#include <string.h>
#include <stdint.h>
#include <errno.h>
@@ -24,6 +25,7 @@
#include <rte_hash.h>
#include <assert.h>
#include <rte_jhash.h>
+#include <rte_byteorder.h>
#include "rte_lpm6.h"
@@ -58,17 +60,33 @@ static struct rte_tailq_elem rte_lpm6_tailq = {
};
EAL_REGISTER_TAILQ(rte_lpm6_tailq)
+#if RTE_BYTE_ORDER == RTE_LITTLE_ENDIAN
+
/** Tbl entry structure. It is the same for both tbl24 and tbl8 */
struct rte_lpm6_tbl_entry {
- uint32_t next_hop: 21; /**< Next hop / next table to be checked. */
- uint32_t depth :8; /**< Rule depth. */
+ uint32_t next_hop :21; /**< Next hop / next table to be checked. */
+ uint32_t depth :8; /**< Rule depth. */
+
+ /* Flags. */
+ uint32_t valid :1; /**< Validation flag. */
+ uint32_t valid_group :1; /**< Group validation flag. */
+ uint32_t ext_entry :1; /**< External entry. */
+};
+
+#else
+struct rte_lpm6_tbl_entry {
/* Flags. */
- uint32_t valid :1; /**< Validation flag. */
+ uint32_t ext_entry :1; /**< External entry. */
uint32_t valid_group :1; /**< Group validation flag. */
- uint32_t ext_entry :1; /**< External entry. */
+ uint32_t valid :1; /**< Validation flag. */
+
+ uint32_t depth :8; /**< Rule depth. */
+ uint32_t next_hop :21; /**< Next hop / next table to be checked. */
};
+#endif
+
/** Rules tbl entry structure. */
struct rte_lpm6_rule {
uint8_t ip[RTE_LPM6_IPV6_ADDR_SIZE]; /**< Rule IP address. */
diff --git a/lib/librte_lpm/rte_lpm_s390x.h b/lib/librte_lpm/rte_lpm_s390x.h
new file mode 100644
index 000000000..eb1fdd450
--- /dev/null
+++ b/lib/librte_lpm/rte_lpm_s390x.h
@@ -0,0 +1,130 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * (c) Copyright IBM Corp. 2016, 2018
+ */
+
+#ifndef _RTE_LPM_S390X_H_
+#define _RTE_LPM_S390X_H_
+
+#include <rte_branch_prediction.h>
+#include <rte_byteorder.h>
+#include <rte_common.h>
+#include <rte_vect.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+static inline void
+rte_lpm_lookupx4(const struct rte_lpm *lpm, xmm_t ip, uint32_t hop[4],
+ uint32_t defv)
+{
+ typedef int vector_signed_int
+ __attribute__((vector_size(4*sizeof(int))));
+ vector_signed_int i24;
+ rte_xmm_t i8;
+ uint32_t tbl[4];
+ uint64_t idx, pt, pt2;
+ const uint32_t *ptbl;
+
+ const uint32_t mask = UINT8_MAX;
+ const vector_signed_int mask8 = (xmm_t){mask, mask, mask, mask};
+
+ /*
+ * RTE_LPM_VALID_EXT_ENTRY_BITMASK for 2 LPM entries
+ * as one 64-bit value (0x0300000003000000).
+ */
+ const uint64_t mask_xv =
+ ((uint64_t)RTE_LPM_VALID_EXT_ENTRY_BITMASK |
+ (uint64_t)RTE_LPM_VALID_EXT_ENTRY_BITMASK << 32);
+
+ /*
+ * RTE_LPM_LOOKUP_SUCCESS for 2 LPM entries
+ * as one 64-bit value (0x0100000001000000).
+ */
+ const uint64_t mask_v =
+ ((uint64_t)RTE_LPM_LOOKUP_SUCCESS |
+ (uint64_t)RTE_LPM_LOOKUP_SUCCESS << 32);
+
+ /* get 4 indexes for tbl24[]. */
+ i24[0] = (uint32_t)ip[0] >> 8;
+ i24[1] = (uint32_t)ip[1] >> 8;
+ i24[2] = (uint32_t)ip[2] >> 8;
+ i24[3] = (uint32_t)ip[3] >> 8;
+
+ /* extract values from tbl24[] */
+ idx = (uint32_t)i24[0];
+ idx = idx < (1<<24) ? idx : (1<<24)-1;
+ ptbl = (const uint32_t *)&lpm->tbl24[idx];
+ tbl[0] = *ptbl;
+
+ idx = (uint32_t) i24[1];
+ idx = idx < (1<<24) ? idx : (1<<24)-1;
+ ptbl = (const uint32_t *)&lpm->tbl24[idx];
+ tbl[1] = *ptbl;
+
+ idx = (uint32_t) i24[2];
+ idx = idx < (1<<24) ? idx : (1<<24)-1;
+ ptbl = (const uint32_t *)&lpm->tbl24[idx];
+ tbl[2] = *ptbl;
+
+ idx = (uint32_t) i24[3];
+ idx = idx < (1<<24) ? idx : (1<<24)-1;
+ ptbl = (const uint32_t *)&lpm->tbl24[idx];
+ tbl[3] = *ptbl;
+
+ /* get 4 indexes for tbl8[]. */
+ i8.x = vec_and(ip, mask8);
+
+ pt = (uint64_t)tbl[0] |
+ (uint64_t)tbl[1] << 32;
+ pt2 = (uint64_t)tbl[2] |
+ (uint64_t)tbl[3] << 32;
+
+ /* search successfully finished for all 4 IP addresses. */
+ if (likely((pt & mask_xv) == mask_v) &&
+ likely((pt2 & mask_xv) == mask_v)) {
+ *(uint64_t *)hop = pt & RTE_LPM_MASKX4_RES;
+ *(uint64_t *)(hop + 2) = pt2 & RTE_LPM_MASKX4_RES;
+ return;
+ }
+
+ if (unlikely((pt & RTE_LPM_VALID_EXT_ENTRY_BITMASK) ==
+ RTE_LPM_VALID_EXT_ENTRY_BITMASK)) {
+ i8.u32[0] = i8.u32[0] +
+ (uint8_t)tbl[0] * RTE_LPM_TBL8_GROUP_NUM_ENTRIES;
+ ptbl = (const uint32_t *)&lpm->tbl8[i8.u32[0]];
+ tbl[0] = *ptbl;
+ }
+ if (unlikely((pt >> 32 & RTE_LPM_VALID_EXT_ENTRY_BITMASK) ==
+ RTE_LPM_VALID_EXT_ENTRY_BITMASK)) {
+ i8.u32[1] = i8.u32[1] +
+ (uint8_t)tbl[1] * RTE_LPM_TBL8_GROUP_NUM_ENTRIES;
+ ptbl = (const uint32_t *)&lpm->tbl8[i8.u32[1]];
+ tbl[1] = *ptbl;
+ }
+ if (unlikely((pt2 & RTE_LPM_VALID_EXT_ENTRY_BITMASK) ==
+ RTE_LPM_VALID_EXT_ENTRY_BITMASK)) {
+ i8.u32[2] = i8.u32[2] +
+ (uint8_t)tbl[2] * RTE_LPM_TBL8_GROUP_NUM_ENTRIES;
+ ptbl = (const uint32_t *)&lpm->tbl8[i8.u32[2]];
+ tbl[2] = *ptbl;
+ }
+ if (unlikely((pt2 >> 32 & RTE_LPM_VALID_EXT_ENTRY_BITMASK) ==
+ RTE_LPM_VALID_EXT_ENTRY_BITMASK)) {
+ i8.u32[3] = i8.u32[3] +
+ (uint8_t)tbl[3] * RTE_LPM_TBL8_GROUP_NUM_ENTRIES;
+ ptbl = (const uint32_t *)&lpm->tbl8[i8.u32[3]];
+ tbl[3] = *ptbl;
+ }
+
+ hop[0] = (tbl[0] & RTE_LPM_LOOKUP_SUCCESS) ? tbl[0] & 0x00FFFFFF : defv;
+ hop[1] = (tbl[1] & RTE_LPM_LOOKUP_SUCCESS) ? tbl[1] & 0x00FFFFFF : defv;
+ hop[2] = (tbl[2] & RTE_LPM_LOOKUP_SUCCESS) ? tbl[2] & 0x00FFFFFF : defv;
+ hop[3] = (tbl[3] & RTE_LPM_LOOKUP_SUCCESS) ? tbl[3] & 0x00FFFFFF : defv;
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_LPM_S390X_H_ */
--
2.17.1
^ permalink raw reply [flat|nested] 80+ messages in thread
* [dpdk-dev] [RFC 04/12] lpm: add support for s390x architecture
2019-04-09 19:06 ` [dpdk-dev] [RFC 04/12] lpm: " Vivian Kong
@ 2019-04-09 19:06 ` Vivian Kong
0 siblings, 0 replies; 80+ messages in thread
From: Vivian Kong @ 2019-04-09 19:06 UTC (permalink / raw)
To: dev
Add big endian support for s390x architecture.
Signed-off-by: Vivian Kong <vivkong@ca.ibm.com>
---
lib/librte_lpm/Makefile | 2 +
lib/librte_lpm/meson.build | 2 +-
lib/librte_lpm/rte_lpm.h | 2 +
lib/librte_lpm/rte_lpm6.c | 26 ++++++-
lib/librte_lpm/rte_lpm_s390x.h | 130 +++++++++++++++++++++++++++++++++
5 files changed, 157 insertions(+), 5 deletions(-)
create mode 100644 lib/librte_lpm/rte_lpm_s390x.h
diff --git a/lib/librte_lpm/Makefile b/lib/librte_lpm/Makefile
index a7946a1c5..16b868304 100644
--- a/lib/librte_lpm/Makefile
+++ b/lib/librte_lpm/Makefile
@@ -26,6 +26,8 @@ else ifeq ($(CONFIG_RTE_ARCH_X86),y)
SYMLINK-$(CONFIG_RTE_LIBRTE_LPM)-include += rte_lpm_sse.h
else ifeq ($(CONFIG_RTE_ARCH_PPC_64),y)
SYMLINK-$(CONFIG_RTE_LIBRTE_LPM)-include += rte_lpm_altivec.h
+else ifeq ($(CONFIG_RTE_ARCH_S390X),y)
+SYMLINK-$(CONFIG_RTE_LIBRTE_LPM)-include += rte_lpm_s390x.h
endif
include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/lib/librte_lpm/meson.build b/lib/librte_lpm/meson.build
index a5176d8ae..68317ed52 100644
--- a/lib/librte_lpm/meson.build
+++ b/lib/librte_lpm/meson.build
@@ -6,5 +6,5 @@ sources = files('rte_lpm.c', 'rte_lpm6.c')
headers = files('rte_lpm.h', 'rte_lpm6.h')
# since header files have different names, we can install all vector headers
# without worrying about which architecture we actually need
-headers += files('rte_lpm_altivec.h', 'rte_lpm_neon.h', 'rte_lpm_sse.h')
+headers += files('rte_lpm_s390x.h', 'rte_lpm_altivec.h', 'rte_lpm_neon.h', 'rte_lpm_sse.h')
deps += ['hash']
diff --git a/lib/librte_lpm/rte_lpm.h b/lib/librte_lpm/rte_lpm.h
index 21550444d..aa8a43968 100644
--- a/lib/librte_lpm/rte_lpm.h
+++ b/lib/librte_lpm/rte_lpm.h
@@ -459,6 +459,8 @@ rte_lpm_lookupx4(const struct rte_lpm *lpm, xmm_t ip, uint32_t hop[4],
#include "rte_lpm_neon.h"
#elif defined(RTE_ARCH_PPC_64)
#include "rte_lpm_altivec.h"
+#elif defined(RTE_ARCH_S390X)
+#include "rte_lpm_s390x.h"
#else
#include "rte_lpm_sse.h"
#endif
diff --git a/lib/librte_lpm/rte_lpm6.c b/lib/librte_lpm/rte_lpm6.c
index a91803113..7aead4035 100644
--- a/lib/librte_lpm/rte_lpm6.c
+++ b/lib/librte_lpm/rte_lpm6.c
@@ -1,6 +1,7 @@
/* SPDX-License-Identifier: BSD-3-Clause
* Copyright(c) 2010-2014 Intel Corporation
*/
+
#include <string.h>
#include <stdint.h>
#include <errno.h>
@@ -24,6 +25,7 @@
#include <rte_hash.h>
#include <assert.h>
#include <rte_jhash.h>
+#include <rte_byteorder.h>
#include "rte_lpm6.h"
@@ -58,17 +60,33 @@ static struct rte_tailq_elem rte_lpm6_tailq = {
};
EAL_REGISTER_TAILQ(rte_lpm6_tailq)
+#if RTE_BYTE_ORDER == RTE_LITTLE_ENDIAN
+
/** Tbl entry structure. It is the same for both tbl24 and tbl8 */
struct rte_lpm6_tbl_entry {
- uint32_t next_hop: 21; /**< Next hop / next table to be checked. */
- uint32_t depth :8; /**< Rule depth. */
+ uint32_t next_hop :21; /**< Next hop / next table to be checked. */
+ uint32_t depth :8; /**< Rule depth. */
+
+ /* Flags. */
+ uint32_t valid :1; /**< Validation flag. */
+ uint32_t valid_group :1; /**< Group validation flag. */
+ uint32_t ext_entry :1; /**< External entry. */
+};
+
+#else
+struct rte_lpm6_tbl_entry {
/* Flags. */
- uint32_t valid :1; /**< Validation flag. */
+ uint32_t ext_entry :1; /**< External entry. */
uint32_t valid_group :1; /**< Group validation flag. */
- uint32_t ext_entry :1; /**< External entry. */
+ uint32_t valid :1; /**< Validation flag. */
+
+ uint32_t depth :8; /**< Rule depth. */
+ uint32_t next_hop :21; /**< Next hop / next table to be checked. */
};
+#endif
+
/** Rules tbl entry structure. */
struct rte_lpm6_rule {
uint8_t ip[RTE_LPM6_IPV6_ADDR_SIZE]; /**< Rule IP address. */
diff --git a/lib/librte_lpm/rte_lpm_s390x.h b/lib/librte_lpm/rte_lpm_s390x.h
new file mode 100644
index 000000000..eb1fdd450
--- /dev/null
+++ b/lib/librte_lpm/rte_lpm_s390x.h
@@ -0,0 +1,130 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * (c) Copyright IBM Corp. 2016, 2018
+ */
+
+#ifndef _RTE_LPM_S390X_H_
+#define _RTE_LPM_S390X_H_
+
+#include <rte_branch_prediction.h>
+#include <rte_byteorder.h>
+#include <rte_common.h>
+#include <rte_vect.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+static inline void
+rte_lpm_lookupx4(const struct rte_lpm *lpm, xmm_t ip, uint32_t hop[4],
+ uint32_t defv)
+{
+ typedef int vector_signed_int
+ __attribute__((vector_size(4*sizeof(int))));
+ vector_signed_int i24;
+ rte_xmm_t i8;
+ uint32_t tbl[4];
+ uint64_t idx, pt, pt2;
+ const uint32_t *ptbl;
+
+ const uint32_t mask = UINT8_MAX;
+ const vector_signed_int mask8 = (xmm_t){mask, mask, mask, mask};
+
+ /*
+ * RTE_LPM_VALID_EXT_ENTRY_BITMASK for 2 LPM entries
+ * as one 64-bit value (0x0300000003000000).
+ */
+ const uint64_t mask_xv =
+ ((uint64_t)RTE_LPM_VALID_EXT_ENTRY_BITMASK |
+ (uint64_t)RTE_LPM_VALID_EXT_ENTRY_BITMASK << 32);
+
+ /*
+ * RTE_LPM_LOOKUP_SUCCESS for 2 LPM entries
+ * as one 64-bit value (0x0100000001000000).
+ */
+ const uint64_t mask_v =
+ ((uint64_t)RTE_LPM_LOOKUP_SUCCESS |
+ (uint64_t)RTE_LPM_LOOKUP_SUCCESS << 32);
+
+ /* get 4 indexes for tbl24[]. */
+ i24[0] = (uint32_t)ip[0] >> 8;
+ i24[1] = (uint32_t)ip[1] >> 8;
+ i24[2] = (uint32_t)ip[2] >> 8;
+ i24[3] = (uint32_t)ip[3] >> 8;
+
+ /* extract values from tbl24[] */
+ idx = (uint32_t)i24[0];
+ idx = idx < (1<<24) ? idx : (1<<24)-1;
+ ptbl = (const uint32_t *)&lpm->tbl24[idx];
+ tbl[0] = *ptbl;
+
+ idx = (uint32_t) i24[1];
+ idx = idx < (1<<24) ? idx : (1<<24)-1;
+ ptbl = (const uint32_t *)&lpm->tbl24[idx];
+ tbl[1] = *ptbl;
+
+ idx = (uint32_t) i24[2];
+ idx = idx < (1<<24) ? idx : (1<<24)-1;
+ ptbl = (const uint32_t *)&lpm->tbl24[idx];
+ tbl[2] = *ptbl;
+
+ idx = (uint32_t) i24[3];
+ idx = idx < (1<<24) ? idx : (1<<24)-1;
+ ptbl = (const uint32_t *)&lpm->tbl24[idx];
+ tbl[3] = *ptbl;
+
+ /* get 4 indexes for tbl8[]. */
+ i8.x = vec_and(ip, mask8);
+
+ pt = (uint64_t)tbl[0] |
+ (uint64_t)tbl[1] << 32;
+ pt2 = (uint64_t)tbl[2] |
+ (uint64_t)tbl[3] << 32;
+
+ /* search successfully finished for all 4 IP addresses. */
+ if (likely((pt & mask_xv) == mask_v) &&
+ likely((pt2 & mask_xv) == mask_v)) {
+ *(uint64_t *)hop = pt & RTE_LPM_MASKX4_RES;
+ *(uint64_t *)(hop + 2) = pt2 & RTE_LPM_MASKX4_RES;
+ return;
+ }
+
+ if (unlikely((pt & RTE_LPM_VALID_EXT_ENTRY_BITMASK) ==
+ RTE_LPM_VALID_EXT_ENTRY_BITMASK)) {
+ i8.u32[0] = i8.u32[0] +
+ (uint8_t)tbl[0] * RTE_LPM_TBL8_GROUP_NUM_ENTRIES;
+ ptbl = (const uint32_t *)&lpm->tbl8[i8.u32[0]];
+ tbl[0] = *ptbl;
+ }
+ if (unlikely((pt >> 32 & RTE_LPM_VALID_EXT_ENTRY_BITMASK) ==
+ RTE_LPM_VALID_EXT_ENTRY_BITMASK)) {
+ i8.u32[1] = i8.u32[1] +
+ (uint8_t)tbl[1] * RTE_LPM_TBL8_GROUP_NUM_ENTRIES;
+ ptbl = (const uint32_t *)&lpm->tbl8[i8.u32[1]];
+ tbl[1] = *ptbl;
+ }
+ if (unlikely((pt2 & RTE_LPM_VALID_EXT_ENTRY_BITMASK) ==
+ RTE_LPM_VALID_EXT_ENTRY_BITMASK)) {
+ i8.u32[2] = i8.u32[2] +
+ (uint8_t)tbl[2] * RTE_LPM_TBL8_GROUP_NUM_ENTRIES;
+ ptbl = (const uint32_t *)&lpm->tbl8[i8.u32[2]];
+ tbl[2] = *ptbl;
+ }
+ if (unlikely((pt2 >> 32 & RTE_LPM_VALID_EXT_ENTRY_BITMASK) ==
+ RTE_LPM_VALID_EXT_ENTRY_BITMASK)) {
+ i8.u32[3] = i8.u32[3] +
+ (uint8_t)tbl[3] * RTE_LPM_TBL8_GROUP_NUM_ENTRIES;
+ ptbl = (const uint32_t *)&lpm->tbl8[i8.u32[3]];
+ tbl[3] = *ptbl;
+ }
+
+ hop[0] = (tbl[0] & RTE_LPM_LOOKUP_SUCCESS) ? tbl[0] & 0x00FFFFFF : defv;
+ hop[1] = (tbl[1] & RTE_LPM_LOOKUP_SUCCESS) ? tbl[1] & 0x00FFFFFF : defv;
+ hop[2] = (tbl[2] & RTE_LPM_LOOKUP_SUCCESS) ? tbl[2] & 0x00FFFFFF : defv;
+ hop[3] = (tbl[3] & RTE_LPM_LOOKUP_SUCCESS) ? tbl[3] & 0x00FFFFFF : defv;
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_LPM_S390X_H_ */
--
2.17.1
^ permalink raw reply [flat|nested] 80+ messages in thread
* [dpdk-dev] [RFC 05/12] examples/l3fwd: add support for s390x architecture
2019-04-09 19:06 [dpdk-dev] [RFC 00/12] introduce s390x architecture Vivian Kong
` (4 preceding siblings ...)
2019-04-09 19:06 ` [dpdk-dev] [RFC 04/12] lpm: " Vivian Kong
@ 2019-04-09 19:06 ` Vivian Kong
2019-04-09 19:06 ` Vivian Kong
2019-04-09 19:06 ` [dpdk-dev] [RFC 06/12] net/i40e: " Vivian Kong
` (9 subsequent siblings)
15 siblings, 1 reply; 80+ messages in thread
From: Vivian Kong @ 2019-04-09 19:06 UTC (permalink / raw)
To: dev
Add s390x specific implementation.
Signed-off-by: Vivian Kong <vivkong@ca.ibm.com>
---
examples/l3fwd/l3fwd_em.c | 8 +
examples/l3fwd/l3fwd_lpm_s390x.h | 137 ++++++++++++++++
examples/l3fwd/l3fwd_s390x.h | 259 +++++++++++++++++++++++++++++++
3 files changed, 404 insertions(+)
create mode 100644 examples/l3fwd/l3fwd_lpm_s390x.h
create mode 100644 examples/l3fwd/l3fwd_s390x.h
diff --git a/examples/l3fwd/l3fwd_em.c b/examples/l3fwd/l3fwd_em.c
index fa8f82be6..a486a9c57 100644
--- a/examples/l3fwd/l3fwd_em.c
+++ b/examples/l3fwd/l3fwd_em.c
@@ -240,6 +240,14 @@ em_mask_key(void *key, xmm_t mask)
return vec_and(data, mask);
}
+#elif defined(RTE_MACHINE_CPUFLAG_ZARCH)
+static inline xmm_t
+em_mask_key(void *key, xmm_t mask)
+{
+ xmm_t data = (xmm_t) vec_xld2(0, (unsigned int *)(key));
+
+ return data + mask;
+}
#else
#error No vector engine (SSE, NEON, ALTIVEC) available, check your toolchain
#endif
diff --git a/examples/l3fwd/l3fwd_lpm_s390x.h b/examples/l3fwd/l3fwd_lpm_s390x.h
new file mode 100644
index 000000000..858f696ba
--- /dev/null
+++ b/examples/l3fwd/l3fwd_lpm_s390x.h
@@ -0,0 +1,137 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2016 Intel Corporation.
+ * (c) Copyright IBM Corp. 2017, 2019
+ */
+#ifndef __L3FWD_LPM_S390X_H__
+#define __L3FWD_LPM_S390X_H__
+
+#include "l3fwd_s390x.h"
+
+typedef unsigned char vector_unsigned_char
+ __attribute__((vector_size(16*sizeof(unsigned char))));
+
+/*
+ * Read packet_type and destination IPV4 addresses from 4 mbufs.
+ */
+static inline void
+processx4_step1(struct rte_mbuf *pkt[FWDSTEP],
+ vector_unsigned_int *dip,
+ uint32_t *ipv4_flag)
+{
+ struct ipv4_hdr *ipv4_hdr;
+ struct ether_hdr *eth_hdr;
+ uint32_t x0, x1, x2, x3;
+
+ eth_hdr = rte_pktmbuf_mtod(pkt[0], struct ether_hdr *);
+ ipv4_hdr = (struct ipv4_hdr *)(eth_hdr + 1);
+ x0 = ipv4_hdr->dst_addr;
+ ipv4_flag[0] = pkt[0]->packet_type & RTE_PTYPE_L3_IPV4;
+
+ rte_compiler_barrier();
+ eth_hdr = rte_pktmbuf_mtod(pkt[1], struct ether_hdr *);
+ ipv4_hdr = (struct ipv4_hdr *)(eth_hdr + 1);
+ x1 = ipv4_hdr->dst_addr;
+ ipv4_flag[0] &= pkt[1]->packet_type;
+
+ rte_compiler_barrier();
+ eth_hdr = rte_pktmbuf_mtod(pkt[2], struct ether_hdr *);
+ ipv4_hdr = (struct ipv4_hdr *)(eth_hdr + 1);
+ x2 = ipv4_hdr->dst_addr;
+ ipv4_flag[0] &= pkt[2]->packet_type;
+
+ rte_compiler_barrier();
+ eth_hdr = rte_pktmbuf_mtod(pkt[3], struct ether_hdr *);
+ ipv4_hdr = (struct ipv4_hdr *)(eth_hdr + 1);
+ x3 = ipv4_hdr->dst_addr;
+ ipv4_flag[0] &= pkt[3]->packet_type;
+
+ rte_compiler_barrier();
+ dip[0] = (vector_unsigned_int){x0, x1, x2, x3};
+}
+
+/*
+ * Lookup into LPM for destination port.
+ * If lookup fails, use incoming port (portid) as destination port.
+ */
+static inline void
+processx4_step2(const struct lcore_conf *qconf,
+ vector_unsigned_int dip,
+ uint32_t ipv4_flag,
+ uint8_t portid,
+ struct rte_mbuf *pkt[FWDSTEP],
+ uint16_t dprt[FWDSTEP])
+{
+ rte_xmm_t dst;
+ const vector_unsigned_char bswap_mask = (vector_unsigned_char){
+ 3, 2, 1, 0,
+ 7, 6, 5, 4,
+ 11, 10, 9, 8,
+ 15, 14, 13, 12};
+
+ /* Byte swap 4 IPV4 addresses. */
+ dip = (vector_unsigned_int)vec_perm(*(vector_unsigned_char *)&dip,
+ (vector_unsigned_char){}, bswap_mask);
+
+ /* if all 4 packets are IPV4. */
+ if (likely(ipv4_flag)) {
+ rte_lpm_lookupx4(qconf->ipv4_lookup_struct, (xmm_t)dip,
+ (uint32_t *)&dst, portid);
+ /* get rid of unused upper 16 bit for each dport. */
+ dst.x = (xmm_t)vec_packs(dst.x, dst.x);
+ *(uint64_t *)dprt = dst.u64[0];
+ } else {
+ dst.x = (xmm_t)dip;
+ dprt[0] = lpm_get_dst_port_with_ipv4(qconf, pkt[0],
+ dst.u32[0], portid);
+ dprt[1] = lpm_get_dst_port_with_ipv4(qconf, pkt[1],
+ dst.u32[1], portid);
+ dprt[2] = lpm_get_dst_port_with_ipv4(qconf, pkt[2],
+ dst.u32[2], portid);
+ dprt[3] = lpm_get_dst_port_with_ipv4(qconf, pkt[3],
+ dst.u32[3], portid);
+ }
+}
+
+/*
+ * Buffer optimized handling of packets, invoked
+ * from main_loop.
+ */
+static inline void
+l3fwd_lpm_send_packets(int nb_rx, struct rte_mbuf **pkts_burst,
+ uint8_t portid, struct lcore_conf *qconf)
+{
+ int32_t j;
+ uint16_t dst_port[MAX_PKT_BURST];
+ vector_unsigned_int dip[MAX_PKT_BURST / FWDSTEP];
+ uint32_t ipv4_flag[MAX_PKT_BURST / FWDSTEP];
+ const int32_t k = RTE_ALIGN_FLOOR(nb_rx, FWDSTEP);
+
+ for (j = 0; j != k; j += FWDSTEP)
+ processx4_step1(&pkts_burst[j], &dip[j / FWDSTEP],
+ &ipv4_flag[j / FWDSTEP]);
+
+ for (j = 0; j != k; j += FWDSTEP)
+ processx4_step2(qconf, dip[j / FWDSTEP],
+ ipv4_flag[j / FWDSTEP],
+ portid, &pkts_burst[j], &dst_port[j]);
+
+ /* Classify last up to 3 packets one by one */
+ switch (nb_rx % FWDSTEP) {
+ case 3:
+ dst_port[j] = lpm_get_dst_port(qconf, pkts_burst[j], portid);
+ j++;
+ /* fall-through */
+ case 2:
+ dst_port[j] = lpm_get_dst_port(qconf, pkts_burst[j], portid);
+ j++;
+ /* fall-through */
+ case 1:
+ dst_port[j] = lpm_get_dst_port(qconf, pkts_burst[j], portid);
+ j++;
+ /* fall-through */
+ }
+
+ send_packets_multi(qconf, pkts_burst, dst_port, nb_rx);
+}
+
+#endif /* __L3FWD_LPM_S390X_H__ */
diff --git a/examples/l3fwd/l3fwd_s390x.h b/examples/l3fwd/l3fwd_s390x.h
new file mode 100644
index 000000000..d027092a4
--- /dev/null
+++ b/examples/l3fwd/l3fwd_s390x.h
@@ -0,0 +1,259 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2016 Intel Corporation.
+ * (c) Copyright IBM Corp. 2017, 2019
+ */
+#ifndef _L3FWD_S390X_H_
+#define _L3FWD_S390X_H_
+
+#include "l3fwd.h"
+#include "l3fwd_common.h"
+
+#define vec_sro(a, b) vec_srb(a, (b) << 64) // Vector Shift Right by Octet
+typedef unsigned int vector_unsigned_int
+ __attribute__((vector_size(4*sizeof(unsigned int))));
+typedef unsigned short vector_unsigned_short
+ __attribute__((vector_size(8*sizeof(unsigned short))));
+
+/*
+ * Update source and destination MAC addresses in the ethernet header.
+ * Perform RFC1812 checks and updates for IPV4 packets.
+ */
+static inline void
+processx4_step3(struct rte_mbuf *pkt[FWDSTEP], uint16_t dst_port[FWDSTEP])
+{
+ vector_unsigned_int te[FWDSTEP];
+ vector_unsigned_int ve[FWDSTEP];
+ vector_unsigned_int *p[FWDSTEP];
+
+ p[0] = rte_pktmbuf_mtod(pkt[0], vector_unsigned_int *);
+ p[1] = rte_pktmbuf_mtod(pkt[1], vector_unsigned_int *);
+ p[2] = rte_pktmbuf_mtod(pkt[2], vector_unsigned_int *);
+ p[3] = rte_pktmbuf_mtod(pkt[3], vector_unsigned_int *);
+
+ ve[0] = (vector_unsigned_int)val_eth[dst_port[0]];
+ te[0] = *p[0];
+
+ ve[1] = (vector_unsigned_int)val_eth[dst_port[1]];
+ te[1] = *p[1];
+
+ ve[2] = (vector_unsigned_int)val_eth[dst_port[2]];
+ te[2] = *p[2];
+
+ ve[3] = (vector_unsigned_int)val_eth[dst_port[3]];
+ te[3] = *p[3];
+
+ /* Update first 12 bytes, keep rest bytes intact. */
+ te[0] = (vector_unsigned_int)vec_sel(
+ (vector_unsigned_short)ve[0],
+ (vector_unsigned_short)te[0],
+ (vector_unsigned_short) {0, 0, 0, 0,
+ 0, 0, 0xffff, 0xffff});
+
+ te[1] = (vector_unsigned_int)vec_sel(
+ (vector_unsigned_short)ve[1],
+ (vector_unsigned_short)te[1],
+ (vector_unsigned_short) {0, 0, 0, 0,
+ 0, 0, 0xffff, 0xffff});
+
+ te[2] = (vector_unsigned_int)vec_sel(
+ (vector_unsigned_short)ve[2],
+ (vector_unsigned_short)te[2],
+ (vector_unsigned_short) {0, 0, 0, 0, 0,
+ 0, 0xffff, 0xffff});
+
+ te[3] = (vector_unsigned_int)vec_sel(
+ (vector_unsigned_short)ve[3],
+ (vector_unsigned_short)te[3],
+ (vector_unsigned_short) {0, 0, 0, 0,
+ 0, 0, 0xffff, 0xffff});
+
+ *p[0] = te[0];
+ *p[1] = te[1];
+ *p[2] = te[2];
+ *p[3] = te[3];
+
+ rfc1812_process((struct ipv4_hdr *)((struct ether_hdr *)p[0] + 1),
+ &dst_port[0], pkt[0]->packet_type);
+ rfc1812_process((struct ipv4_hdr *)((struct ether_hdr *)p[1] + 1),
+ &dst_port[1], pkt[1]->packet_type);
+ rfc1812_process((struct ipv4_hdr *)((struct ether_hdr *)p[2] + 1),
+ &dst_port[2], pkt[2]->packet_type);
+ rfc1812_process((struct ipv4_hdr *)((struct ether_hdr *)p[3] + 1),
+ &dst_port[3], pkt[3]->packet_type);
+}
+
+/*
+ * Group consecutive packets with the same destination port in bursts of 4.
+ * Suppose we have array of destination ports:
+ * dst_port[] = {a, b, c, d,, e, ... }
+ * dp1 should contain: <a, b, c, d>, dp2: <b, c, d, e>.
+ * We doing 4 comparisons at once and the result is 4 bit mask.
+ * This mask is used as an index into prebuild array of pnum values.
+ */
+static inline uint16_t *
+port_groupx4(uint16_t pn[FWDSTEP + 1], uint16_t *lp, vector_unsigned_short dp1,
+ vector_unsigned_short dp2)
+{
+ union {
+ uint16_t u16[FWDSTEP + 1];
+ uint64_t u64;
+ } *pnum = (void *)pn;
+
+ int32_t v;
+
+ v = vec_any_eq(dp1, dp2);
+
+
+ /* update last port counter. */
+ lp[0] += gptbl[v].lpv;
+
+ /* if dest port value has changed. */
+ if (v != GRPMSK) {
+ pnum->u64 = gptbl[v].pnum;
+ pnum->u16[FWDSTEP] = 1;
+ lp = pnum->u16 + gptbl[v].idx;
+ }
+
+ return lp;
+}
+
+/**
+ * Process one packet:
+ * Update source and destination MAC addresses in the ethernet header.
+ * Perform RFC1812 checks and updates for IPV4 packets.
+ */
+static inline void
+process_packet(struct rte_mbuf *pkt, uint16_t *dst_port)
+{
+ struct ether_hdr *eth_hdr;
+ vector_unsigned_int te, ve;
+
+ eth_hdr = rte_pktmbuf_mtod(pkt, struct ether_hdr *);
+
+ te = *(vector_unsigned_int *)eth_hdr;
+ ve = (vector_unsigned_int)val_eth[dst_port[0]];
+
+ rfc1812_process((struct ipv4_hdr *)(eth_hdr + 1), dst_port,
+ pkt->packet_type);
+
+ /* dynamically vec_sel te and ve for MASK_ETH (0x3f) */
+ te = (vector_unsigned_int)vec_sel(
+ (vector_unsigned_short)ve,
+ (vector_unsigned_short)te,
+ (vector_unsigned_short){0, 0, 0, 0,
+ 0, 0, 0xffff, 0xffff});
+
+ *(vector_unsigned_int *)eth_hdr = te;
+}
+
+/**
+ * Send packets burst from pkts_burst to the ports in dst_port array
+ */
+static __rte_always_inline void
+send_packets_multi(struct lcore_conf *qconf, struct rte_mbuf **pkts_burst,
+ uint16_t dst_port[MAX_PKT_BURST], int nb_rx)
+{
+ int32_t k;
+ int j = 0;
+ uint16_t dlp;
+ uint16_t *lp;
+ uint16_t pnum[MAX_PKT_BURST + 1];
+
+ /*
+ * Finish packet processing and group consecutive
+ * packets with the same destination port.
+ */
+ k = RTE_ALIGN_FLOOR(nb_rx, FWDSTEP);
+ if (k != 0) {
+ vector_unsigned_short dp1, dp2;
+
+ lp = pnum;
+ lp[0] = 1;
+
+ processx4_step3(pkts_burst, dst_port);
+
+ /* dp1: <d[0], d[1], d[2], d[3], ... > */
+ dp1 = *(vector_unsigned_short *)dst_port;
+
+ for (j = FWDSTEP; j != k; j += FWDSTEP) {
+ processx4_step3(&pkts_burst[j], &dst_port[j]);
+
+ /*
+ * dp2:
+ * <d[j-3], d[j-2], d[j-1], d[j], ... >
+ */
+ dp2 = *((vector_unsigned_short *)
+ &dst_port[j - FWDSTEP + 1]);
+ lp = port_groupx4(&pnum[j - FWDSTEP], lp, dp1, dp2);
+
+ /*
+ * dp1:
+ * <d[j], d[j+1], d[j+2], d[j+3], ... >
+ */
+ dp1 = vec_sro(dp2, (vector unsigned char) {
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, (FWDSTEP - 1) * sizeof(dst_port[0])});
+ }
+
+ /*
+ * dp2: <d[j-3], d[j-2], d[j-1], d[j-1], ... >
+ */
+ dp2 = vec_perm(dp1, (vector_unsigned_short){},
+ (vector unsigned char) {0xf9});
+ lp = port_groupx4(&pnum[j - FWDSTEP], lp, dp1, dp2);
+
+ /*
+ * remove values added by the last repeated
+ * dst port.
+ */
+ lp[0]--;
+ dlp = dst_port[j - 1];
+ } else {
+ /* set dlp and lp to the never used values. */
+ dlp = BAD_PORT - 1;
+ lp = pnum + MAX_PKT_BURST;
+ }
+
+ /* Process up to last 3 packets one by one. */
+ switch (nb_rx % FWDSTEP) {
+ case 3:
+ process_packet(pkts_burst[j], dst_port + j);
+ GROUP_PORT_STEP(dlp, dst_port, lp, pnum, j);
+ j++;
+ /* fall-through */
+ case 2:
+ process_packet(pkts_burst[j], dst_port + j);
+ GROUP_PORT_STEP(dlp, dst_port, lp, pnum, j);
+ j++;
+ /* fall-through */
+ case 1:
+ process_packet(pkts_burst[j], dst_port + j);
+ GROUP_PORT_STEP(dlp, dst_port, lp, pnum, j);
+ j++;
+ }
+
+ /*
+ * Send packets out, through destination port.
+ * Consecutive packets with the same destination port
+ * are already grouped together.
+ * If destination port for the packet equals BAD_PORT,
+ * then free the packet without sending it out.
+ */
+ for (j = 0; j < nb_rx; j += k) {
+
+ int32_t m;
+ uint16_t pn;
+
+ pn = dst_port[j];
+ k = pnum[j];
+
+ if (likely(pn != BAD_PORT))
+ send_packetsx4(qconf, pn, pkts_burst + j, k);
+ else
+ for (m = j; m != j + k; m++)
+ rte_pktmbuf_free(pkts_burst[m]);
+
+ }
+}
+
+#endif /* _L3FWD_S390X_H_ */
--
2.17.1
^ permalink raw reply [flat|nested] 80+ messages in thread
* [dpdk-dev] [RFC 05/12] examples/l3fwd: add support for s390x architecture
2019-04-09 19:06 ` [dpdk-dev] [RFC 05/12] examples/l3fwd: " Vivian Kong
@ 2019-04-09 19:06 ` Vivian Kong
0 siblings, 0 replies; 80+ messages in thread
From: Vivian Kong @ 2019-04-09 19:06 UTC (permalink / raw)
To: dev
Add s390x specific implementation.
Signed-off-by: Vivian Kong <vivkong@ca.ibm.com>
---
examples/l3fwd/l3fwd_em.c | 8 +
examples/l3fwd/l3fwd_lpm_s390x.h | 137 ++++++++++++++++
examples/l3fwd/l3fwd_s390x.h | 259 +++++++++++++++++++++++++++++++
3 files changed, 404 insertions(+)
create mode 100644 examples/l3fwd/l3fwd_lpm_s390x.h
create mode 100644 examples/l3fwd/l3fwd_s390x.h
diff --git a/examples/l3fwd/l3fwd_em.c b/examples/l3fwd/l3fwd_em.c
index fa8f82be6..a486a9c57 100644
--- a/examples/l3fwd/l3fwd_em.c
+++ b/examples/l3fwd/l3fwd_em.c
@@ -240,6 +240,14 @@ em_mask_key(void *key, xmm_t mask)
return vec_and(data, mask);
}
+#elif defined(RTE_MACHINE_CPUFLAG_ZARCH)
+static inline xmm_t
+em_mask_key(void *key, xmm_t mask)
+{
+ xmm_t data = (xmm_t) vec_xld2(0, (unsigned int *)(key));
+
+ return data + mask;
+}
#else
#error No vector engine (SSE, NEON, ALTIVEC) available, check your toolchain
#endif
diff --git a/examples/l3fwd/l3fwd_lpm_s390x.h b/examples/l3fwd/l3fwd_lpm_s390x.h
new file mode 100644
index 000000000..858f696ba
--- /dev/null
+++ b/examples/l3fwd/l3fwd_lpm_s390x.h
@@ -0,0 +1,137 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2016 Intel Corporation.
+ * (c) Copyright IBM Corp. 2017, 2019
+ */
+#ifndef __L3FWD_LPM_S390X_H__
+#define __L3FWD_LPM_S390X_H__
+
+#include "l3fwd_s390x.h"
+
+typedef unsigned char vector_unsigned_char
+ __attribute__((vector_size(16*sizeof(unsigned char))));
+
+/*
+ * Read packet_type and destination IPV4 addresses from 4 mbufs.
+ */
+static inline void
+processx4_step1(struct rte_mbuf *pkt[FWDSTEP],
+ vector_unsigned_int *dip,
+ uint32_t *ipv4_flag)
+{
+ struct ipv4_hdr *ipv4_hdr;
+ struct ether_hdr *eth_hdr;
+ uint32_t x0, x1, x2, x3;
+
+ eth_hdr = rte_pktmbuf_mtod(pkt[0], struct ether_hdr *);
+ ipv4_hdr = (struct ipv4_hdr *)(eth_hdr + 1);
+ x0 = ipv4_hdr->dst_addr;
+ ipv4_flag[0] = pkt[0]->packet_type & RTE_PTYPE_L3_IPV4;
+
+ rte_compiler_barrier();
+ eth_hdr = rte_pktmbuf_mtod(pkt[1], struct ether_hdr *);
+ ipv4_hdr = (struct ipv4_hdr *)(eth_hdr + 1);
+ x1 = ipv4_hdr->dst_addr;
+ ipv4_flag[0] &= pkt[1]->packet_type;
+
+ rte_compiler_barrier();
+ eth_hdr = rte_pktmbuf_mtod(pkt[2], struct ether_hdr *);
+ ipv4_hdr = (struct ipv4_hdr *)(eth_hdr + 1);
+ x2 = ipv4_hdr->dst_addr;
+ ipv4_flag[0] &= pkt[2]->packet_type;
+
+ rte_compiler_barrier();
+ eth_hdr = rte_pktmbuf_mtod(pkt[3], struct ether_hdr *);
+ ipv4_hdr = (struct ipv4_hdr *)(eth_hdr + 1);
+ x3 = ipv4_hdr->dst_addr;
+ ipv4_flag[0] &= pkt[3]->packet_type;
+
+ rte_compiler_barrier();
+ dip[0] = (vector_unsigned_int){x0, x1, x2, x3};
+}
+
+/*
+ * Lookup into LPM for destination port.
+ * If lookup fails, use incoming port (portid) as destination port.
+ */
+static inline void
+processx4_step2(const struct lcore_conf *qconf,
+ vector_unsigned_int dip,
+ uint32_t ipv4_flag,
+ uint8_t portid,
+ struct rte_mbuf *pkt[FWDSTEP],
+ uint16_t dprt[FWDSTEP])
+{
+ rte_xmm_t dst;
+ const vector_unsigned_char bswap_mask = (vector_unsigned_char){
+ 3, 2, 1, 0,
+ 7, 6, 5, 4,
+ 11, 10, 9, 8,
+ 15, 14, 13, 12};
+
+ /* Byte swap 4 IPV4 addresses. */
+ dip = (vector_unsigned_int)vec_perm(*(vector_unsigned_char *)&dip,
+ (vector_unsigned_char){}, bswap_mask);
+
+ /* if all 4 packets are IPV4. */
+ if (likely(ipv4_flag)) {
+ rte_lpm_lookupx4(qconf->ipv4_lookup_struct, (xmm_t)dip,
+ (uint32_t *)&dst, portid);
+ /* get rid of unused upper 16 bit for each dport. */
+ dst.x = (xmm_t)vec_packs(dst.x, dst.x);
+ *(uint64_t *)dprt = dst.u64[0];
+ } else {
+ dst.x = (xmm_t)dip;
+ dprt[0] = lpm_get_dst_port_with_ipv4(qconf, pkt[0],
+ dst.u32[0], portid);
+ dprt[1] = lpm_get_dst_port_with_ipv4(qconf, pkt[1],
+ dst.u32[1], portid);
+ dprt[2] = lpm_get_dst_port_with_ipv4(qconf, pkt[2],
+ dst.u32[2], portid);
+ dprt[3] = lpm_get_dst_port_with_ipv4(qconf, pkt[3],
+ dst.u32[3], portid);
+ }
+}
+
+/*
+ * Buffer optimized handling of packets, invoked
+ * from main_loop.
+ */
+static inline void
+l3fwd_lpm_send_packets(int nb_rx, struct rte_mbuf **pkts_burst,
+ uint8_t portid, struct lcore_conf *qconf)
+{
+ int32_t j;
+ uint16_t dst_port[MAX_PKT_BURST];
+ vector_unsigned_int dip[MAX_PKT_BURST / FWDSTEP];
+ uint32_t ipv4_flag[MAX_PKT_BURST / FWDSTEP];
+ const int32_t k = RTE_ALIGN_FLOOR(nb_rx, FWDSTEP);
+
+ for (j = 0; j != k; j += FWDSTEP)
+ processx4_step1(&pkts_burst[j], &dip[j / FWDSTEP],
+ &ipv4_flag[j / FWDSTEP]);
+
+ for (j = 0; j != k; j += FWDSTEP)
+ processx4_step2(qconf, dip[j / FWDSTEP],
+ ipv4_flag[j / FWDSTEP],
+ portid, &pkts_burst[j], &dst_port[j]);
+
+ /* Classify last up to 3 packets one by one */
+ switch (nb_rx % FWDSTEP) {
+ case 3:
+ dst_port[j] = lpm_get_dst_port(qconf, pkts_burst[j], portid);
+ j++;
+ /* fall-through */
+ case 2:
+ dst_port[j] = lpm_get_dst_port(qconf, pkts_burst[j], portid);
+ j++;
+ /* fall-through */
+ case 1:
+ dst_port[j] = lpm_get_dst_port(qconf, pkts_burst[j], portid);
+ j++;
+ /* fall-through */
+ }
+
+ send_packets_multi(qconf, pkts_burst, dst_port, nb_rx);
+}
+
+#endif /* __L3FWD_LPM_S390X_H__ */
diff --git a/examples/l3fwd/l3fwd_s390x.h b/examples/l3fwd/l3fwd_s390x.h
new file mode 100644
index 000000000..d027092a4
--- /dev/null
+++ b/examples/l3fwd/l3fwd_s390x.h
@@ -0,0 +1,259 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2016 Intel Corporation.
+ * (c) Copyright IBM Corp. 2017, 2019
+ */
+#ifndef _L3FWD_S390X_H_
+#define _L3FWD_S390X_H_
+
+#include "l3fwd.h"
+#include "l3fwd_common.h"
+
+#define vec_sro(a, b) vec_srb(a, (b) << 64) // Vector Shift Right by Octet
+typedef unsigned int vector_unsigned_int
+ __attribute__((vector_size(4*sizeof(unsigned int))));
+typedef unsigned short vector_unsigned_short
+ __attribute__((vector_size(8*sizeof(unsigned short))));
+
+/*
+ * Update source and destination MAC addresses in the ethernet header.
+ * Perform RFC1812 checks and updates for IPV4 packets.
+ */
+static inline void
+processx4_step3(struct rte_mbuf *pkt[FWDSTEP], uint16_t dst_port[FWDSTEP])
+{
+ vector_unsigned_int te[FWDSTEP];
+ vector_unsigned_int ve[FWDSTEP];
+ vector_unsigned_int *p[FWDSTEP];
+
+ p[0] = rte_pktmbuf_mtod(pkt[0], vector_unsigned_int *);
+ p[1] = rte_pktmbuf_mtod(pkt[1], vector_unsigned_int *);
+ p[2] = rte_pktmbuf_mtod(pkt[2], vector_unsigned_int *);
+ p[3] = rte_pktmbuf_mtod(pkt[3], vector_unsigned_int *);
+
+ ve[0] = (vector_unsigned_int)val_eth[dst_port[0]];
+ te[0] = *p[0];
+
+ ve[1] = (vector_unsigned_int)val_eth[dst_port[1]];
+ te[1] = *p[1];
+
+ ve[2] = (vector_unsigned_int)val_eth[dst_port[2]];
+ te[2] = *p[2];
+
+ ve[3] = (vector_unsigned_int)val_eth[dst_port[3]];
+ te[3] = *p[3];
+
+ /* Update first 12 bytes, keep rest bytes intact. */
+ te[0] = (vector_unsigned_int)vec_sel(
+ (vector_unsigned_short)ve[0],
+ (vector_unsigned_short)te[0],
+ (vector_unsigned_short) {0, 0, 0, 0,
+ 0, 0, 0xffff, 0xffff});
+
+ te[1] = (vector_unsigned_int)vec_sel(
+ (vector_unsigned_short)ve[1],
+ (vector_unsigned_short)te[1],
+ (vector_unsigned_short) {0, 0, 0, 0,
+ 0, 0, 0xffff, 0xffff});
+
+ te[2] = (vector_unsigned_int)vec_sel(
+ (vector_unsigned_short)ve[2],
+ (vector_unsigned_short)te[2],
+ (vector_unsigned_short) {0, 0, 0, 0, 0,
+ 0, 0xffff, 0xffff});
+
+ te[3] = (vector_unsigned_int)vec_sel(
+ (vector_unsigned_short)ve[3],
+ (vector_unsigned_short)te[3],
+ (vector_unsigned_short) {0, 0, 0, 0,
+ 0, 0, 0xffff, 0xffff});
+
+ *p[0] = te[0];
+ *p[1] = te[1];
+ *p[2] = te[2];
+ *p[3] = te[3];
+
+ rfc1812_process((struct ipv4_hdr *)((struct ether_hdr *)p[0] + 1),
+ &dst_port[0], pkt[0]->packet_type);
+ rfc1812_process((struct ipv4_hdr *)((struct ether_hdr *)p[1] + 1),
+ &dst_port[1], pkt[1]->packet_type);
+ rfc1812_process((struct ipv4_hdr *)((struct ether_hdr *)p[2] + 1),
+ &dst_port[2], pkt[2]->packet_type);
+ rfc1812_process((struct ipv4_hdr *)((struct ether_hdr *)p[3] + 1),
+ &dst_port[3], pkt[3]->packet_type);
+}
+
+/*
+ * Group consecutive packets with the same destination port in bursts of 4.
+ * Suppose we have array of destination ports:
+ * dst_port[] = {a, b, c, d,, e, ... }
+ * dp1 should contain: <a, b, c, d>, dp2: <b, c, d, e>.
+ * We doing 4 comparisons at once and the result is 4 bit mask.
+ * This mask is used as an index into prebuild array of pnum values.
+ */
+static inline uint16_t *
+port_groupx4(uint16_t pn[FWDSTEP + 1], uint16_t *lp, vector_unsigned_short dp1,
+ vector_unsigned_short dp2)
+{
+ union {
+ uint16_t u16[FWDSTEP + 1];
+ uint64_t u64;
+ } *pnum = (void *)pn;
+
+ int32_t v;
+
+ v = vec_any_eq(dp1, dp2);
+
+
+ /* update last port counter. */
+ lp[0] += gptbl[v].lpv;
+
+ /* if dest port value has changed. */
+ if (v != GRPMSK) {
+ pnum->u64 = gptbl[v].pnum;
+ pnum->u16[FWDSTEP] = 1;
+ lp = pnum->u16 + gptbl[v].idx;
+ }
+
+ return lp;
+}
+
+/**
+ * Process one packet:
+ * Update source and destination MAC addresses in the ethernet header.
+ * Perform RFC1812 checks and updates for IPV4 packets.
+ */
+static inline void
+process_packet(struct rte_mbuf *pkt, uint16_t *dst_port)
+{
+ struct ether_hdr *eth_hdr;
+ vector_unsigned_int te, ve;
+
+ eth_hdr = rte_pktmbuf_mtod(pkt, struct ether_hdr *);
+
+ te = *(vector_unsigned_int *)eth_hdr;
+ ve = (vector_unsigned_int)val_eth[dst_port[0]];
+
+ rfc1812_process((struct ipv4_hdr *)(eth_hdr + 1), dst_port,
+ pkt->packet_type);
+
+ /* dynamically vec_sel te and ve for MASK_ETH (0x3f) */
+ te = (vector_unsigned_int)vec_sel(
+ (vector_unsigned_short)ve,
+ (vector_unsigned_short)te,
+ (vector_unsigned_short){0, 0, 0, 0,
+ 0, 0, 0xffff, 0xffff});
+
+ *(vector_unsigned_int *)eth_hdr = te;
+}
+
+/**
+ * Send packets burst from pkts_burst to the ports in dst_port array
+ */
+static __rte_always_inline void
+send_packets_multi(struct lcore_conf *qconf, struct rte_mbuf **pkts_burst,
+ uint16_t dst_port[MAX_PKT_BURST], int nb_rx)
+{
+ int32_t k;
+ int j = 0;
+ uint16_t dlp;
+ uint16_t *lp;
+ uint16_t pnum[MAX_PKT_BURST + 1];
+
+ /*
+ * Finish packet processing and group consecutive
+ * packets with the same destination port.
+ */
+ k = RTE_ALIGN_FLOOR(nb_rx, FWDSTEP);
+ if (k != 0) {
+ vector_unsigned_short dp1, dp2;
+
+ lp = pnum;
+ lp[0] = 1;
+
+ processx4_step3(pkts_burst, dst_port);
+
+ /* dp1: <d[0], d[1], d[2], d[3], ... > */
+ dp1 = *(vector_unsigned_short *)dst_port;
+
+ for (j = FWDSTEP; j != k; j += FWDSTEP) {
+ processx4_step3(&pkts_burst[j], &dst_port[j]);
+
+ /*
+ * dp2:
+ * <d[j-3], d[j-2], d[j-1], d[j], ... >
+ */
+ dp2 = *((vector_unsigned_short *)
+ &dst_port[j - FWDSTEP + 1]);
+ lp = port_groupx4(&pnum[j - FWDSTEP], lp, dp1, dp2);
+
+ /*
+ * dp1:
+ * <d[j], d[j+1], d[j+2], d[j+3], ... >
+ */
+ dp1 = vec_sro(dp2, (vector unsigned char) {
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, (FWDSTEP - 1) * sizeof(dst_port[0])});
+ }
+
+ /*
+ * dp2: <d[j-3], d[j-2], d[j-1], d[j-1], ... >
+ */
+ dp2 = vec_perm(dp1, (vector_unsigned_short){},
+ (vector unsigned char) {0xf9});
+ lp = port_groupx4(&pnum[j - FWDSTEP], lp, dp1, dp2);
+
+ /*
+ * remove values added by the last repeated
+ * dst port.
+ */
+ lp[0]--;
+ dlp = dst_port[j - 1];
+ } else {
+ /* set dlp and lp to the never used values. */
+ dlp = BAD_PORT - 1;
+ lp = pnum + MAX_PKT_BURST;
+ }
+
+ /* Process up to last 3 packets one by one. */
+ switch (nb_rx % FWDSTEP) {
+ case 3:
+ process_packet(pkts_burst[j], dst_port + j);
+ GROUP_PORT_STEP(dlp, dst_port, lp, pnum, j);
+ j++;
+ /* fall-through */
+ case 2:
+ process_packet(pkts_burst[j], dst_port + j);
+ GROUP_PORT_STEP(dlp, dst_port, lp, pnum, j);
+ j++;
+ /* fall-through */
+ case 1:
+ process_packet(pkts_burst[j], dst_port + j);
+ GROUP_PORT_STEP(dlp, dst_port, lp, pnum, j);
+ j++;
+ }
+
+ /*
+ * Send packets out, through destination port.
+ * Consecutive packets with the same destination port
+ * are already grouped together.
+ * If destination port for the packet equals BAD_PORT,
+ * then free the packet without sending it out.
+ */
+ for (j = 0; j < nb_rx; j += k) {
+
+ int32_t m;
+ uint16_t pn;
+
+ pn = dst_port[j];
+ k = pnum[j];
+
+ if (likely(pn != BAD_PORT))
+ send_packetsx4(qconf, pn, pkts_burst + j, k);
+ else
+ for (m = j; m != j + k; m++)
+ rte_pktmbuf_free(pkts_burst[m]);
+
+ }
+}
+
+#endif /* _L3FWD_S390X_H_ */
--
2.17.1
^ permalink raw reply [flat|nested] 80+ messages in thread
* [dpdk-dev] [RFC 06/12] net/i40e: add support for s390x architecture
2019-04-09 19:06 [dpdk-dev] [RFC 00/12] introduce s390x architecture Vivian Kong
` (5 preceding siblings ...)
2019-04-09 19:06 ` [dpdk-dev] [RFC 05/12] examples/l3fwd: " Vivian Kong
@ 2019-04-09 19:06 ` Vivian Kong
2019-04-09 19:06 ` Vivian Kong
2019-04-09 19:06 ` [dpdk-dev] [RFC 07/12] test: " Vivian Kong
` (8 subsequent siblings)
15 siblings, 1 reply; 80+ messages in thread
From: Vivian Kong @ 2019-04-09 19:06 UTC (permalink / raw)
To: dev
Enable i40e and i40e vector support on s390x.
Signed-off-by: Vivian Kong <vivkong@ca.ibm.com>
---
doc/guides/nics/features/i40e.ini | 1 +
doc/guides/nics/features/i40e_vec.ini | 1 +
drivers/net/i40e/Makefile | 2 +
drivers/net/i40e/i40e_rxtx_vec_s390x.c | 631 +++++++++++++++++++++++++
4 files changed, 635 insertions(+)
create mode 100644 drivers/net/i40e/i40e_rxtx_vec_s390x.c
diff --git a/doc/guides/nics/features/i40e.ini b/doc/guides/nics/features/i40e.ini
index 16eab7f43..0c1acfc23 100644
--- a/doc/guides/nics/features/i40e.ini
+++ b/doc/guides/nics/features/i40e.ini
@@ -55,3 +55,4 @@ x86-32 = Y
x86-64 = Y
ARMv8 = Y
Power8 = Y
+s390x = Y
diff --git a/doc/guides/nics/features/i40e_vec.ini b/doc/guides/nics/features/i40e_vec.ini
index c65e8b036..8c5062698 100644
--- a/doc/guides/nics/features/i40e_vec.ini
+++ b/doc/guides/nics/features/i40e_vec.ini
@@ -43,3 +43,4 @@ x86-32 = Y
x86-64 = Y
ARMv8 = Y
Power8 = Y
+s390x = Y
diff --git a/drivers/net/i40e/Makefile b/drivers/net/i40e/Makefile
index 3f869a8d6..d13223cc9 100644
--- a/drivers/net/i40e/Makefile
+++ b/drivers/net/i40e/Makefile
@@ -78,6 +78,8 @@ ifeq ($(CONFIG_RTE_ARCH_ARM64),y)
SRCS-$(CONFIG_RTE_LIBRTE_I40E_INC_VECTOR) += i40e_rxtx_vec_neon.c
else ifeq ($(CONFIG_RTE_ARCH_PPC_64),y)
SRCS-$(CONFIG_RTE_LIBRTE_I40E_INC_VECTOR) += i40e_rxtx_vec_altivec.c
+else ifeq ($(CONFIG_RTE_ARCH_S390X),y)
+SRCS-$(CONFIG_RTE_LIBRTE_I40E_INC_VECTOR) += i40e_rxtx_vec_s390x.c
else
SRCS-$(CONFIG_RTE_LIBRTE_I40E_INC_VECTOR) += i40e_rxtx_vec_sse.c
endif
diff --git a/drivers/net/i40e/i40e_rxtx_vec_s390x.c b/drivers/net/i40e/i40e_rxtx_vec_s390x.c
new file mode 100644
index 000000000..b35ab0678
--- /dev/null
+++ b/drivers/net/i40e/i40e_rxtx_vec_s390x.c
@@ -0,0 +1,631 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+ * (c) Copyright IBM Corp. 2017, 2019
+ */
+
+#include <stdint.h>
+#include <vecintrin.h>
+#include <rte_ethdev_driver.h>
+#include <rte_malloc.h>
+
+#include "base/i40e_prototype.h"
+#include "base/i40e_type.h"
+#include "i40e_ethdev.h"
+#include "i40e_rxtx.h"
+#include "i40e_rxtx_vec_common.h"
+
+#pragma GCC diagnostic ignored "-Wcast-qual"
+
+typedef unsigned long long vector_unsigned_long_long
+ __attribute__((vector_size(2 * sizeof(unsigned long long))));
+typedef unsigned int vector_unsigned_int
+ __attribute__((vector_size(4 * sizeof(unsigned int))));
+typedef unsigned short vector_unsigned_short
+ __attribute__((vector_size(8 * sizeof(unsigned short))));
+typedef unsigned char vector_unsigned_char
+ __attribute__((vector_size(16 * sizeof(unsigned char))));
+
+
+static inline void
+i40e_rxq_rearm(struct i40e_rx_queue *rxq)
+{
+ int i;
+ uint16_t rx_id;
+ volatile union i40e_rx_desc *rxdp;
+
+ struct i40e_rx_entry *rxep = &rxq->sw_ring[rxq->rxrearm_start];
+ struct rte_mbuf *mb0, *mb1;
+
+ vector_unsigned_long_long hdr_room = (vector_unsigned_long_long){
+ RTE_PKTMBUF_HEADROOM,
+ RTE_PKTMBUF_HEADROOM};
+ vector_unsigned_long_long dma_addr0, dma_addr1;
+
+ rxdp = rxq->rx_ring + rxq->rxrearm_start;
+
+ /* Pull 'n' more MBUFs into the software ring */
+ if (rte_mempool_get_bulk(rxq->mp,
+ (void *)rxep,
+ RTE_I40E_RXQ_REARM_THRESH) < 0) {
+ if (rxq->rxrearm_nb + RTE_I40E_RXQ_REARM_THRESH >=
+ rxq->nb_rx_desc) {
+ dma_addr0 = (vector_unsigned_long_long){};
+ for (i = 0; i < RTE_I40E_DESCS_PER_LOOP; i++) {
+ rxep[i].mbuf = &rxq->fake_mbuf;
+ vec_xstd2(dma_addr0, 0,
+ (unsigned long long *)&rxdp[i].read);
+ }
+ }
+ rte_eth_devices[rxq->port_id].data->rx_mbuf_alloc_failed +=
+ RTE_I40E_RXQ_REARM_THRESH;
+ return;
+ }
+
+ /* Initialize the mbufs in vector, process 2 mbufs in one loop */
+ for (i = 0; i < RTE_I40E_RXQ_REARM_THRESH; i += 2, rxep += 2) {
+ vector_unsigned_long_long vaddr0, vaddr1;
+ uintptr_t p0, p1;
+
+ mb0 = rxep[0].mbuf;
+ mb1 = rxep[1].mbuf;
+
+ /* Flush mbuf with pkt template.
+ * Data to be rearmed is 6 bytes long.
+ * Though, RX will overwrite ol_flags that are coming next
+ * anyway. So overwrite whole 8 bytes with one load:
+ * 6 bytes of rearm_data plus first 2 bytes of ol_flags.
+ */
+ p0 = (uintptr_t)&mb0->rearm_data;
+ *(uint64_t *)p0 = rxq->mbuf_initializer;
+ p1 = (uintptr_t)&mb1->rearm_data;
+ *(uint64_t *)p1 = rxq->mbuf_initializer;
+
+ /* load buf_addr(lo 64bit) and buf_iova(hi 64bit) */
+ vaddr0 = vec_xld2(0, (unsigned long long *)&mb0->buf_addr);
+ vaddr1 = vec_xld2(0, (unsigned long long *)&mb1->buf_addr);
+
+ /* convert pa to dma_addr hdr/data */
+ dma_addr0 = vec_mergel(vaddr0, vaddr0);
+ dma_addr1 = vec_mergel(vaddr1, vaddr1);
+
+ /* add headroom to pa values */
+ dma_addr0 = dma_addr0 + hdr_room;
+ dma_addr1 = dma_addr1 + hdr_room;
+
+ /* flush desc with pa dma_addr */
+ vec_xstd2(dma_addr0, 0, (unsigned long long *)&rxdp++->read);
+ vec_xstd2(dma_addr1, 0, (unsigned long long *)&rxdp++->read);
+ }
+
+ rxq->rxrearm_start += RTE_I40E_RXQ_REARM_THRESH;
+ if (rxq->rxrearm_start >= rxq->nb_rx_desc)
+ rxq->rxrearm_start = 0;
+
+ rxq->rxrearm_nb -= RTE_I40E_RXQ_REARM_THRESH;
+
+ rx_id = (uint16_t)((rxq->rxrearm_start == 0) ?
+ (rxq->nb_rx_desc - 1) : (rxq->rxrearm_start - 1));
+
+ /* Update the tail pointer on the NIC */
+ I40E_PCI_REG_WRITE(rxq->qrx_tail, rx_id);
+}
+
+static inline void
+desc_to_olflags_v(vector_unsigned_long_long descs[4], struct rte_mbuf **rx_pkts)
+{
+ vector_unsigned_int vlan0, vlan1, rss, l3_l4e;
+
+ /* mask everything except RSS, flow director and VLAN flags
+ * bit2 is for VLAN tag, bit11 for flow director indication
+ * bit13:12 for RSS indication.
+ */
+ const vector_unsigned_int rss_vlan_msk = (vector_unsigned_int){
+ (int32_t)0x1c03804, (int32_t)0x1c03804,
+ (int32_t)0x1c03804, (int32_t)0x1c03804};
+
+ /* map rss and vlan type to rss hash and vlan flag */
+ const vector_unsigned_char vlan_flags = (vector_unsigned_char){
+ 0, 0, 0, 0,
+ PKT_RX_VLAN | PKT_RX_VLAN_STRIPPED, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0};
+
+ const vector_unsigned_char rss_flags = (vector_unsigned_char){
+ 0, PKT_RX_FDIR, 0, 0,
+ 0, 0, PKT_RX_RSS_HASH, PKT_RX_RSS_HASH | PKT_RX_FDIR,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0};
+
+ const vector_unsigned_char l3_l4e_flags = (vector_unsigned_char){
+ 0,
+ PKT_RX_IP_CKSUM_BAD,
+ PKT_RX_L4_CKSUM_BAD,
+ PKT_RX_L4_CKSUM_BAD | PKT_RX_IP_CKSUM_BAD,
+ PKT_RX_EIP_CKSUM_BAD,
+ PKT_RX_EIP_CKSUM_BAD | PKT_RX_IP_CKSUM_BAD,
+ PKT_RX_EIP_CKSUM_BAD | PKT_RX_L4_CKSUM_BAD,
+ PKT_RX_EIP_CKSUM_BAD | PKT_RX_L4_CKSUM_BAD
+ | PKT_RX_IP_CKSUM_BAD,
+ 0, 0, 0, 0, 0, 0, 0, 0};
+
+ vlan0 = (vector_unsigned_int)vec_mergel(descs[0], descs[1]);
+ vlan1 = (vector_unsigned_int)vec_mergel(descs[2], descs[3]);
+ vlan0 = (vector_unsigned_int)vec_mergeh(vlan0, vlan1);
+
+ vlan1 = vec_and(vlan0, rss_vlan_msk);
+ vlan0 = (vector_unsigned_int)vec_perm(vlan_flags,
+ (vector_unsigned_char){},
+ *(vector_unsigned_char *)&vlan1);
+
+ rss[0] = (uint32_t)vlan1[0] >> 11;
+ rss[1] = (uint32_t)vlan1[1] >> 11;
+ rss[2] = (uint32_t)vlan1[2] >> 11;
+ rss[3] = (uint32_t)vlan1[3] >> 11;
+ rss = (vector_unsigned_int)vec_perm(rss_flags, (vector_unsigned_char){},
+ *(vector_unsigned_char *)&rss);
+
+ l3_l4e[0] = (uint32_t)vlan1[0] >> 22;
+ l3_l4e[1] = (uint32_t)vlan1[1] >> 22;
+ l3_l4e[2] = (uint32_t)vlan1[2] >> 22;
+ l3_l4e[3] = (uint32_t)vlan1[3] >> 22;
+
+ l3_l4e = (vector_unsigned_int)vec_perm(l3_l4e_flags,
+ (vector_unsigned_char){},
+ *(vector_unsigned_char *)&l3_l4e);
+
+ vlan0 = vec_or(vlan0, rss);
+ vlan0 = vec_or(vlan0, l3_l4e);
+
+ rx_pkts[0]->ol_flags = (uint64_t)vlan0[2];
+ rx_pkts[1]->ol_flags = (uint64_t)vlan0[3];
+ rx_pkts[2]->ol_flags = (uint64_t)vlan0[0];
+ rx_pkts[3]->ol_flags = (uint64_t)vlan0[1];
+}
+
+#define PKTLEN_SHIFT 10
+
+static inline void
+desc_to_ptype_v(vector_unsigned_long_long descs[4], struct rte_mbuf **rx_pkts,
+ uint32_t *ptype_tbl)
+{
+ vector_unsigned_long_long ptype0 = vec_mergel(descs[0], descs[1]);
+ vector_unsigned_long_long ptype1 = vec_mergel(descs[2], descs[3]);
+
+ ptype0[0] = ptype0[0] >> 30;
+ ptype0[1] = ptype0[1] >> 30;
+
+ ptype1[0] = ptype1[0] >> 30;
+ ptype1[1] = ptype1[1] >> 30;
+
+ rx_pkts[0]->packet_type =
+ ptype_tbl[(*(vector_unsigned_char *)&ptype0)[0]];
+ rx_pkts[1]->packet_type =
+ ptype_tbl[(*(vector_unsigned_char *)&ptype0)[8]];
+ rx_pkts[2]->packet_type =
+ ptype_tbl[(*(vector_unsigned_char *)&ptype1)[0]];
+ rx_pkts[3]->packet_type =
+ ptype_tbl[(*(vector_unsigned_char *)&ptype1)[8]];
+}
+
+ /* Notice:
+ * - nb_pkts < RTE_I40E_DESCS_PER_LOOP, just return no packet
+ * - nb_pkts > RTE_I40E_VPMD_RX_BURST, only scan RTE_I40E_VPMD_RX_BURST
+ * numbers of DD bits
+ */
+static inline uint16_t
+_recv_raw_pkts_vec(struct i40e_rx_queue *rxq, struct rte_mbuf **rx_pkts,
+ uint16_t nb_pkts, uint8_t *split_packet)
+{
+ volatile union i40e_rx_desc *rxdp;
+ struct i40e_rx_entry *sw_ring;
+ uint16_t nb_pkts_recd;
+ int pos;
+ uint64_t var;
+ vector_unsigned_char shuf_msk;
+ uint32_t *ptype_tbl = rxq->vsi->adapter->ptype_tbl;
+
+ vector_unsigned_short crc_adjust = (vector_unsigned_short){
+ 0, 0, /* ignore pkt_type field */
+ rxq->crc_len, /* sub crc on pkt_len */
+ 0, /* ignore high-16bits of pkt_len */
+ rxq->crc_len, /* sub crc on data_len */
+ 0, 0, 0 /* ignore non-length fields */
+ };
+ vector_unsigned_long_long dd_check, eop_check;
+
+ /* nb_pkts shall be less equal than RTE_I40E_MAX_RX_BURST */
+ nb_pkts = RTE_MIN(nb_pkts, RTE_I40E_MAX_RX_BURST);
+
+ /* nb_pkts has to be floor-aligned to RTE_I40E_DESCS_PER_LOOP */
+ nb_pkts = RTE_ALIGN_FLOOR(nb_pkts, RTE_I40E_DESCS_PER_LOOP);
+
+ /* Just the act of getting into the function from the application is
+ * going to cost about 7 cycles
+ */
+ rxdp = rxq->rx_ring + rxq->rx_tail;
+
+ rte_prefetch0(rxdp);
+
+ /* See if we need to rearm the RX queue - gives the prefetch a bit
+ * of time to act
+ */
+ if (rxq->rxrearm_nb > RTE_I40E_RXQ_REARM_THRESH)
+ i40e_rxq_rearm(rxq);
+
+ /* Before we start moving massive data around, check to see if
+ * there is actually a packet available
+ */
+ if (!(rxdp->wb.qword1.status_error_len &
+ rte_cpu_to_le_32(1 << I40E_RX_DESC_STATUS_DD_SHIFT)))
+ return 0;
+
+ /* 4 packets DD mask */
+ dd_check = (vector_unsigned_long_long){0x0000000100000001ULL,
+ 0x0000000100000001ULL};
+
+ /* 4 packets EOP mask */
+ eop_check = (vector_unsigned_long_long){0x0000000200000002ULL,
+ 0x0000000200000002ULL};
+
+ /* mask to shuffle from desc. to mbuf */
+ shuf_msk = (vector_unsigned_char){
+ 0xFF, 0xFF, /* pkt_type set as unknown */
+ 0xFF, 0xFF, /* pkt_type set as unknown */
+ 14, 15, /* octet 15~14, low 16 bits pkt_len */
+ 0xFF, 0xFF, /* skip high 16 bits pkt_len, zero out */
+ 14, 15, /* octet 15~14, 16 bits data_len */
+ 2, 3, /* octet 2~3, low 16 bits vlan_macip */
+ 4, 5, 6, 7 /* octet 4~7, 32bits rss */
+ };
+
+ /* Cache is empty -> need to scan the buffer rings, but first move
+ * the next 'n' mbufs into the cache
+ */
+ sw_ring = &rxq->sw_ring[rxq->rx_tail];
+
+ /* A. load 4 packet in one loop
+ * [A*. mask out 4 unused dirty field in desc]
+ * B. copy 4 mbuf point from swring to rx_pkts
+ * C. calc the number of DD bits among the 4 packets
+ * [C*. extract the end-of-packet bit, if requested]
+ * D. fill info. from desc to mbuf
+ */
+
+ for (pos = 0, nb_pkts_recd = 0; pos < nb_pkts;
+ pos += RTE_I40E_DESCS_PER_LOOP,
+ rxdp += RTE_I40E_DESCS_PER_LOOP) {
+ vector_unsigned_long_long descs[RTE_I40E_DESCS_PER_LOOP];
+ vector_unsigned_char pkt_mb1, pkt_mb2, pkt_mb3, pkt_mb4;
+ vector_unsigned_short staterr, sterr_tmp1, sterr_tmp2;
+ vector_unsigned_long_long mbp1, mbp2; /* two mbuf pointer
+ * in one XMM reg.
+ */
+
+ /* B.1 load 1 mbuf point */
+ mbp1 = *(vector_unsigned_long_long *)&sw_ring[pos];
+ /* Read desc statuses backwards to avoid race condition */
+ /* A.1 load 4 pkts desc */
+ descs[3] = *(vector_unsigned_long_long *)(rxdp + 3);
+ rte_compiler_barrier();
+
+ /* B.2 copy 2 mbuf point into rx_pkts */
+ *(vector_unsigned_long_long *)&rx_pkts[pos] = mbp1;
+
+ /* B.1 load 1 mbuf point */
+ mbp2 = *(vector_unsigned_long_long *)&sw_ring[pos + 2];
+
+ descs[2] = *(vector_unsigned_long_long *)(rxdp + 2);
+ rte_compiler_barrier();
+ /* B.1 load 2 mbuf point */
+ descs[1] = *(vector_unsigned_long_long *)(rxdp + 1);
+ rte_compiler_barrier();
+ descs[0] = *(vector_unsigned_long_long *)(rxdp);
+
+ /* B.2 copy 2 mbuf point into rx_pkts */
+ *(vector_unsigned_long_long *)&rx_pkts[pos + 2] = mbp2;
+
+ if (split_packet) {
+ rte_mbuf_prefetch_part2(rx_pkts[pos]);
+ rte_mbuf_prefetch_part2(rx_pkts[pos + 1]);
+ rte_mbuf_prefetch_part2(rx_pkts[pos + 2]);
+ rte_mbuf_prefetch_part2(rx_pkts[pos + 3]);
+ }
+
+ /* avoid compiler reorder optimization */
+ rte_compiler_barrier();
+
+ /* pkt 3,4 shift the pktlen field to be 16-bit aligned*/
+ vector_unsigned_int len3_temp = vec_xld2(0,
+ (unsigned int *)&descs[3]);
+ len3_temp[3] = len3_temp[3] << PKTLEN_SHIFT;
+ const vector_unsigned_int len3 = len3_temp;
+
+ vector_unsigned_int len2_temp = vec_xld2(0,
+ (unsigned int *)&descs[2]);
+ len2_temp[3] = len2_temp[3] << PKTLEN_SHIFT;
+ const vector_unsigned_int len2 = len2_temp;
+
+ /* merge the now-aligned packet length fields back in */
+ descs[3] = (vector_unsigned_long_long)len3;
+ descs[2] = (vector_unsigned_long_long)len2;
+
+ /* D.1 pkt 3,4 convert format from desc to pktmbuf */
+ pkt_mb4 = vec_perm((vector_unsigned_char)descs[3],
+ (vector_unsigned_char){}, shuf_msk);
+ pkt_mb3 = vec_perm((vector_unsigned_char)descs[2],
+ (vector_unsigned_char){}, shuf_msk);
+
+ /* C.1 4=>2 filter staterr info only */
+ sterr_tmp2 = vec_mergel((vector_unsigned_short)descs[3],
+ (vector_unsigned_short)descs[2]);
+ /* C.1 4=>2 filter staterr info only */
+ sterr_tmp1 = vec_mergel((vector_unsigned_short)descs[1],
+ (vector_unsigned_short)descs[0]);
+ /* D.2 pkt 3,4 set in_port/nb_seg and remove crc */
+ pkt_mb4 = (vector_unsigned_char)((vector_unsigned_short)pkt_mb4
+ - crc_adjust);
+ pkt_mb3 = (vector_unsigned_char)((vector_unsigned_short)pkt_mb3
+ - crc_adjust);
+
+ /* pkt 1,2 shift the pktlen field to be 16-bit aligned*/
+ const vector_unsigned_int len1 =
+ vec_sll(vec_xld2(0, (unsigned int *)&descs[1]),
+ (vector_unsigned_int){0, 0, 0, PKTLEN_SHIFT});
+ const vector_unsigned_int len0 =
+ vec_sll(vec_xld2(0, (unsigned int *)&descs[0]),
+ (vector_unsigned_int){0, 0, 0, PKTLEN_SHIFT});
+
+ /* merge the now-aligned packet length fields back in */
+ descs[1] = (vector_unsigned_long_long)len1;
+ descs[0] = (vector_unsigned_long_long)len0;
+
+ /* D.1 pkt 1,2 convert format from desc to pktmbuf */
+ pkt_mb2 = vec_perm((vector_unsigned_char)descs[1],
+ (vector_unsigned_char){}, shuf_msk);
+ pkt_mb1 = vec_perm((vector_unsigned_char)descs[0],
+ (vector_unsigned_char){}, shuf_msk);
+
+ /* C.2 get 4 pkts staterr value */
+ staterr = (vector_unsigned_short)vec_mergeh(sterr_tmp1,
+ sterr_tmp2);
+
+ /* D.3 copy final 3,4 data to rx_pkts */
+ vec_xstd2(pkt_mb4, 0, (unsigned char *)&rx_pkts[pos + 3]
+ ->rx_descriptor_fields1);
+ vec_xstd2(pkt_mb3, 0, (unsigned char *)&rx_pkts[pos + 2]
+ ->rx_descriptor_fields1);
+
+ /* D.2 pkt 1,2 set in_port/nb_seg and remove crc */
+ pkt_mb2 = (vector_unsigned_char)((vector_unsigned_short)pkt_mb2
+ - crc_adjust);
+ pkt_mb1 = (vector_unsigned_char)((vector_unsigned_short)pkt_mb1
+ - crc_adjust);
+
+ /* C* extract and record EOP bit */
+ if (split_packet) {
+ vector_unsigned_char eop_shuf_mask =
+ (vector_unsigned_char){
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0x04, 0x0C, 0x00, 0x08
+ };
+
+ /* and with mask to extract bits, flipping 1-0 */
+ vector_unsigned_char eop_bits =
+ vec_and((vector_unsigned_char)vec_nor(staterr,
+ staterr), (vector_unsigned_char)eop_check);
+ /* the staterr values are not in order, as the count
+ * count of dd bits doesn't care. However, for end of
+ * packet tracking, we do care, so shuffle. This also
+ * compresses the 32-bit values to 8-bit
+ */
+ eop_bits = vec_perm(eop_bits, (vector_unsigned_char){},
+ eop_shuf_mask);
+ /* store the resulting 32-bit value */
+ *split_packet = (vec_xld2(0,
+ (unsigned int *)&eop_bits))[0];
+ split_packet += RTE_I40E_DESCS_PER_LOOP;
+
+ /* zero-out next pointers */
+ rx_pkts[pos]->next = NULL;
+ rx_pkts[pos + 1]->next = NULL;
+ rx_pkts[pos + 2]->next = NULL;
+ rx_pkts[pos + 3]->next = NULL;
+ }
+
+ /* C.3 calc available number of desc */
+ staterr = vec_and(staterr, (vector_unsigned_short)dd_check);
+
+ /* D.3 copy final 1,2 data to rx_pkts */
+ vec_xstd2(pkt_mb2, 0, (unsigned char *)&rx_pkts[pos + 1]
+ ->rx_descriptor_fields1);
+ vec_xstd2(pkt_mb1, 0, (unsigned char *)&rx_pkts[pos]
+ ->rx_descriptor_fields1);
+
+ desc_to_ptype_v(descs, &rx_pkts[pos], ptype_tbl);
+ desc_to_olflags_v(descs, &rx_pkts[pos]);
+
+ /* C.4 calc avaialbe number of desc */
+ var = __builtin_popcountll((vec_xld2(0,
+ (unsigned long long *)&staterr)[0]));
+ nb_pkts_recd += var;
+ if (likely(var != RTE_I40E_DESCS_PER_LOOP))
+ break;
+ }
+
+ /* Update our internal tail pointer */
+ rxq->rx_tail = (uint16_t)(rxq->rx_tail + nb_pkts_recd);
+ rxq->rx_tail = (uint16_t)(rxq->rx_tail & (rxq->nb_rx_desc - 1));
+ rxq->rxrearm_nb = (uint16_t)(rxq->rxrearm_nb + nb_pkts_recd);
+
+ return nb_pkts_recd;
+}
+
+ /* Notice:
+ * - nb_pkts < RTE_I40E_DESCS_PER_LOOP, just return no packet
+ * - nb_pkts > RTE_I40E_VPMD_RX_BURST, only scan RTE_I40E_VPMD_RX_BURST
+ * numbers of DD bits
+ */
+uint16_t
+i40e_recv_pkts_vec(void *rx_queue, struct rte_mbuf **rx_pkts,
+ uint16_t nb_pkts)
+{
+ return _recv_raw_pkts_vec(rx_queue, rx_pkts, nb_pkts, NULL);
+}
+
+ /* vPMD receive routine that reassembles scattered packets
+ * Notice:
+ * - nb_pkts < RTE_I40E_DESCS_PER_LOOP, just return no packet
+ * - nb_pkts > RTE_I40E_VPMD_RX_BURST, only scan RTE_I40E_VPMD_RX_BURST
+ * numbers of DD bits
+ */
+uint16_t
+i40e_recv_scattered_pkts_vec(void *rx_queue, struct rte_mbuf **rx_pkts,
+ uint16_t nb_pkts)
+{
+ struct i40e_rx_queue *rxq = rx_queue;
+ uint8_t split_flags[RTE_I40E_VPMD_RX_BURST] = {0};
+
+ /* get some new buffers */
+ uint16_t nb_bufs = _recv_raw_pkts_vec(rxq, rx_pkts, nb_pkts,
+ split_flags);
+ if (nb_bufs == 0)
+ return 0;
+
+ /* happy day case, full burst + no packets to be joined */
+ const uint64_t *split_fl64 = (uint64_t *)split_flags;
+
+ if (rxq->pkt_first_seg == NULL &&
+ split_fl64[0] == 0 && split_fl64[1] == 0 &&
+ split_fl64[2] == 0 && split_fl64[3] == 0)
+ return nb_bufs;
+
+ /* reassemble any packets that need reassembly*/
+ unsigned int i = 0;
+
+ if (!rxq->pkt_first_seg) {
+ /* find the first split flag, and only reassemble then*/
+ while (i < nb_bufs && !split_flags[i])
+ i++;
+ if (i == nb_bufs)
+ return nb_bufs;
+ }
+ return i + reassemble_packets(rxq, &rx_pkts[i], nb_bufs - i,
+ &split_flags[i]);
+}
+
+static inline void
+vtx1(volatile struct i40e_tx_desc *txdp,
+ struct rte_mbuf *pkt, uint64_t flags)
+{
+ uint64_t high_qw = (I40E_TX_DESC_DTYPE_DATA |
+ ((uint64_t)flags << I40E_TXD_QW1_CMD_SHIFT) |
+ ((uint64_t)pkt->data_len << I40E_TXD_QW1_TX_BUF_SZ_SHIFT));
+
+ vector_unsigned_long_long descriptor = (vector_unsigned_long_long){
+ pkt->buf_iova + pkt->data_off, high_qw};
+ *(vector_unsigned_long_long *)txdp = descriptor;
+}
+
+static inline void
+vtx(volatile struct i40e_tx_desc *txdp,
+ struct rte_mbuf **pkt, uint16_t nb_pkts, uint64_t flags)
+{
+ int i;
+
+ for (i = 0; i < nb_pkts; ++i, ++txdp, ++pkt)
+ vtx1(txdp, *pkt, flags);
+}
+
+uint16_t
+i40e_xmit_fixed_burst_vec(void *tx_queue, struct rte_mbuf **tx_pkts,
+ uint16_t nb_pkts)
+{
+ struct i40e_tx_queue *txq = (struct i40e_tx_queue *)tx_queue;
+ volatile struct i40e_tx_desc *txdp;
+ struct i40e_tx_entry *txep;
+ uint16_t n, nb_commit, tx_id;
+ uint64_t flags = I40E_TD_CMD;
+ uint64_t rs = I40E_TX_DESC_CMD_RS | I40E_TD_CMD;
+ int i;
+
+ /* cross rx_thresh boundary is not allowed */
+ nb_pkts = RTE_MIN(nb_pkts, txq->tx_rs_thresh);
+
+ if (txq->nb_tx_free < txq->tx_free_thresh)
+ i40e_tx_free_bufs(txq);
+
+ nb_pkts = (uint16_t)RTE_MIN(txq->nb_tx_free, nb_pkts);
+ nb_commit = nb_pkts;
+ if (unlikely(nb_pkts == 0))
+ return 0;
+
+ tx_id = txq->tx_tail;
+ txdp = &txq->tx_ring[tx_id];
+ txep = &txq->sw_ring[tx_id];
+
+ txq->nb_tx_free = (uint16_t)(txq->nb_tx_free - nb_pkts);
+
+ n = (uint16_t)(txq->nb_tx_desc - tx_id);
+ if (nb_commit >= n) {
+ tx_backlog_entry(txep, tx_pkts, n);
+
+ for (i = 0; i < n - 1; ++i, ++tx_pkts, ++txdp)
+ vtx1(txdp, *tx_pkts, flags);
+
+ vtx1(txdp, *tx_pkts++, rs);
+
+ nb_commit = (uint16_t)(nb_commit - n);
+
+ tx_id = 0;
+ txq->tx_next_rs = (uint16_t)(txq->tx_rs_thresh - 1);
+
+ /* avoid reach the end of ring */
+ txdp = &txq->tx_ring[tx_id];
+ txep = &txq->sw_ring[tx_id];
+ }
+
+ tx_backlog_entry(txep, tx_pkts, nb_commit);
+
+ vtx(txdp, tx_pkts, nb_commit, flags);
+
+ tx_id = (uint16_t)(tx_id + nb_commit);
+ if (tx_id > txq->tx_next_rs) {
+ txq->tx_ring[txq->tx_next_rs].cmd_type_offset_bsz |=
+ rte_cpu_to_le_64(((uint64_t)I40E_TX_DESC_CMD_RS) <<
+ I40E_TXD_QW1_CMD_SHIFT);
+ txq->tx_next_rs =
+ (uint16_t)(txq->tx_next_rs + txq->tx_rs_thresh);
+ }
+
+ txq->tx_tail = tx_id;
+
+ I40E_PCI_REG_WRITE(txq->qtx_tail, txq->tx_tail);
+
+ return nb_pkts;
+}
+
+void __attribute__((cold))
+i40e_rx_queue_release_mbufs_vec(struct i40e_rx_queue *rxq)
+{
+ _i40e_rx_queue_release_mbufs_vec(rxq);
+}
+
+int __attribute__((cold))
+i40e_rxq_vec_setup(struct i40e_rx_queue *rxq)
+{
+ return i40e_rxq_vec_setup_default(rxq);
+}
+
+int __attribute__((cold))
+i40e_txq_vec_setup(struct i40e_tx_queue __rte_unused * txq)
+{
+ return 0;
+}
+
+int __attribute__((cold))
+i40e_rx_vec_dev_conf_condition_check(struct rte_eth_dev *dev)
+{
+ return i40e_rx_vec_dev_conf_condition_check_default(dev);
+}
--
2.17.1
^ permalink raw reply [flat|nested] 80+ messages in thread
* [dpdk-dev] [RFC 06/12] net/i40e: add support for s390x architecture
2019-04-09 19:06 ` [dpdk-dev] [RFC 06/12] net/i40e: " Vivian Kong
@ 2019-04-09 19:06 ` Vivian Kong
0 siblings, 0 replies; 80+ messages in thread
From: Vivian Kong @ 2019-04-09 19:06 UTC (permalink / raw)
To: dev
Enable i40e and i40e vector support on s390x.
Signed-off-by: Vivian Kong <vivkong@ca.ibm.com>
---
doc/guides/nics/features/i40e.ini | 1 +
doc/guides/nics/features/i40e_vec.ini | 1 +
drivers/net/i40e/Makefile | 2 +
drivers/net/i40e/i40e_rxtx_vec_s390x.c | 631 +++++++++++++++++++++++++
4 files changed, 635 insertions(+)
create mode 100644 drivers/net/i40e/i40e_rxtx_vec_s390x.c
diff --git a/doc/guides/nics/features/i40e.ini b/doc/guides/nics/features/i40e.ini
index 16eab7f43..0c1acfc23 100644
--- a/doc/guides/nics/features/i40e.ini
+++ b/doc/guides/nics/features/i40e.ini
@@ -55,3 +55,4 @@ x86-32 = Y
x86-64 = Y
ARMv8 = Y
Power8 = Y
+s390x = Y
diff --git a/doc/guides/nics/features/i40e_vec.ini b/doc/guides/nics/features/i40e_vec.ini
index c65e8b036..8c5062698 100644
--- a/doc/guides/nics/features/i40e_vec.ini
+++ b/doc/guides/nics/features/i40e_vec.ini
@@ -43,3 +43,4 @@ x86-32 = Y
x86-64 = Y
ARMv8 = Y
Power8 = Y
+s390x = Y
diff --git a/drivers/net/i40e/Makefile b/drivers/net/i40e/Makefile
index 3f869a8d6..d13223cc9 100644
--- a/drivers/net/i40e/Makefile
+++ b/drivers/net/i40e/Makefile
@@ -78,6 +78,8 @@ ifeq ($(CONFIG_RTE_ARCH_ARM64),y)
SRCS-$(CONFIG_RTE_LIBRTE_I40E_INC_VECTOR) += i40e_rxtx_vec_neon.c
else ifeq ($(CONFIG_RTE_ARCH_PPC_64),y)
SRCS-$(CONFIG_RTE_LIBRTE_I40E_INC_VECTOR) += i40e_rxtx_vec_altivec.c
+else ifeq ($(CONFIG_RTE_ARCH_S390X),y)
+SRCS-$(CONFIG_RTE_LIBRTE_I40E_INC_VECTOR) += i40e_rxtx_vec_s390x.c
else
SRCS-$(CONFIG_RTE_LIBRTE_I40E_INC_VECTOR) += i40e_rxtx_vec_sse.c
endif
diff --git a/drivers/net/i40e/i40e_rxtx_vec_s390x.c b/drivers/net/i40e/i40e_rxtx_vec_s390x.c
new file mode 100644
index 000000000..b35ab0678
--- /dev/null
+++ b/drivers/net/i40e/i40e_rxtx_vec_s390x.c
@@ -0,0 +1,631 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+ * (c) Copyright IBM Corp. 2017, 2019
+ */
+
+#include <stdint.h>
+#include <vecintrin.h>
+#include <rte_ethdev_driver.h>
+#include <rte_malloc.h>
+
+#include "base/i40e_prototype.h"
+#include "base/i40e_type.h"
+#include "i40e_ethdev.h"
+#include "i40e_rxtx.h"
+#include "i40e_rxtx_vec_common.h"
+
+#pragma GCC diagnostic ignored "-Wcast-qual"
+
+typedef unsigned long long vector_unsigned_long_long
+ __attribute__((vector_size(2 * sizeof(unsigned long long))));
+typedef unsigned int vector_unsigned_int
+ __attribute__((vector_size(4 * sizeof(unsigned int))));
+typedef unsigned short vector_unsigned_short
+ __attribute__((vector_size(8 * sizeof(unsigned short))));
+typedef unsigned char vector_unsigned_char
+ __attribute__((vector_size(16 * sizeof(unsigned char))));
+
+
+static inline void
+i40e_rxq_rearm(struct i40e_rx_queue *rxq)
+{
+ int i;
+ uint16_t rx_id;
+ volatile union i40e_rx_desc *rxdp;
+
+ struct i40e_rx_entry *rxep = &rxq->sw_ring[rxq->rxrearm_start];
+ struct rte_mbuf *mb0, *mb1;
+
+ vector_unsigned_long_long hdr_room = (vector_unsigned_long_long){
+ RTE_PKTMBUF_HEADROOM,
+ RTE_PKTMBUF_HEADROOM};
+ vector_unsigned_long_long dma_addr0, dma_addr1;
+
+ rxdp = rxq->rx_ring + rxq->rxrearm_start;
+
+ /* Pull 'n' more MBUFs into the software ring */
+ if (rte_mempool_get_bulk(rxq->mp,
+ (void *)rxep,
+ RTE_I40E_RXQ_REARM_THRESH) < 0) {
+ if (rxq->rxrearm_nb + RTE_I40E_RXQ_REARM_THRESH >=
+ rxq->nb_rx_desc) {
+ dma_addr0 = (vector_unsigned_long_long){};
+ for (i = 0; i < RTE_I40E_DESCS_PER_LOOP; i++) {
+ rxep[i].mbuf = &rxq->fake_mbuf;
+ vec_xstd2(dma_addr0, 0,
+ (unsigned long long *)&rxdp[i].read);
+ }
+ }
+ rte_eth_devices[rxq->port_id].data->rx_mbuf_alloc_failed +=
+ RTE_I40E_RXQ_REARM_THRESH;
+ return;
+ }
+
+ /* Initialize the mbufs in vector, process 2 mbufs in one loop */
+ for (i = 0; i < RTE_I40E_RXQ_REARM_THRESH; i += 2, rxep += 2) {
+ vector_unsigned_long_long vaddr0, vaddr1;
+ uintptr_t p0, p1;
+
+ mb0 = rxep[0].mbuf;
+ mb1 = rxep[1].mbuf;
+
+ /* Flush mbuf with pkt template.
+ * Data to be rearmed is 6 bytes long.
+ * Though, RX will overwrite ol_flags that are coming next
+ * anyway. So overwrite whole 8 bytes with one load:
+ * 6 bytes of rearm_data plus first 2 bytes of ol_flags.
+ */
+ p0 = (uintptr_t)&mb0->rearm_data;
+ *(uint64_t *)p0 = rxq->mbuf_initializer;
+ p1 = (uintptr_t)&mb1->rearm_data;
+ *(uint64_t *)p1 = rxq->mbuf_initializer;
+
+ /* load buf_addr(lo 64bit) and buf_iova(hi 64bit) */
+ vaddr0 = vec_xld2(0, (unsigned long long *)&mb0->buf_addr);
+ vaddr1 = vec_xld2(0, (unsigned long long *)&mb1->buf_addr);
+
+ /* convert pa to dma_addr hdr/data */
+ dma_addr0 = vec_mergel(vaddr0, vaddr0);
+ dma_addr1 = vec_mergel(vaddr1, vaddr1);
+
+ /* add headroom to pa values */
+ dma_addr0 = dma_addr0 + hdr_room;
+ dma_addr1 = dma_addr1 + hdr_room;
+
+ /* flush desc with pa dma_addr */
+ vec_xstd2(dma_addr0, 0, (unsigned long long *)&rxdp++->read);
+ vec_xstd2(dma_addr1, 0, (unsigned long long *)&rxdp++->read);
+ }
+
+ rxq->rxrearm_start += RTE_I40E_RXQ_REARM_THRESH;
+ if (rxq->rxrearm_start >= rxq->nb_rx_desc)
+ rxq->rxrearm_start = 0;
+
+ rxq->rxrearm_nb -= RTE_I40E_RXQ_REARM_THRESH;
+
+ rx_id = (uint16_t)((rxq->rxrearm_start == 0) ?
+ (rxq->nb_rx_desc - 1) : (rxq->rxrearm_start - 1));
+
+ /* Update the tail pointer on the NIC */
+ I40E_PCI_REG_WRITE(rxq->qrx_tail, rx_id);
+}
+
+static inline void
+desc_to_olflags_v(vector_unsigned_long_long descs[4], struct rte_mbuf **rx_pkts)
+{
+ vector_unsigned_int vlan0, vlan1, rss, l3_l4e;
+
+ /* mask everything except RSS, flow director and VLAN flags
+ * bit2 is for VLAN tag, bit11 for flow director indication
+ * bit13:12 for RSS indication.
+ */
+ const vector_unsigned_int rss_vlan_msk = (vector_unsigned_int){
+ (int32_t)0x1c03804, (int32_t)0x1c03804,
+ (int32_t)0x1c03804, (int32_t)0x1c03804};
+
+ /* map rss and vlan type to rss hash and vlan flag */
+ const vector_unsigned_char vlan_flags = (vector_unsigned_char){
+ 0, 0, 0, 0,
+ PKT_RX_VLAN | PKT_RX_VLAN_STRIPPED, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0};
+
+ const vector_unsigned_char rss_flags = (vector_unsigned_char){
+ 0, PKT_RX_FDIR, 0, 0,
+ 0, 0, PKT_RX_RSS_HASH, PKT_RX_RSS_HASH | PKT_RX_FDIR,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0};
+
+ const vector_unsigned_char l3_l4e_flags = (vector_unsigned_char){
+ 0,
+ PKT_RX_IP_CKSUM_BAD,
+ PKT_RX_L4_CKSUM_BAD,
+ PKT_RX_L4_CKSUM_BAD | PKT_RX_IP_CKSUM_BAD,
+ PKT_RX_EIP_CKSUM_BAD,
+ PKT_RX_EIP_CKSUM_BAD | PKT_RX_IP_CKSUM_BAD,
+ PKT_RX_EIP_CKSUM_BAD | PKT_RX_L4_CKSUM_BAD,
+ PKT_RX_EIP_CKSUM_BAD | PKT_RX_L4_CKSUM_BAD
+ | PKT_RX_IP_CKSUM_BAD,
+ 0, 0, 0, 0, 0, 0, 0, 0};
+
+ vlan0 = (vector_unsigned_int)vec_mergel(descs[0], descs[1]);
+ vlan1 = (vector_unsigned_int)vec_mergel(descs[2], descs[3]);
+ vlan0 = (vector_unsigned_int)vec_mergeh(vlan0, vlan1);
+
+ vlan1 = vec_and(vlan0, rss_vlan_msk);
+ vlan0 = (vector_unsigned_int)vec_perm(vlan_flags,
+ (vector_unsigned_char){},
+ *(vector_unsigned_char *)&vlan1);
+
+ rss[0] = (uint32_t)vlan1[0] >> 11;
+ rss[1] = (uint32_t)vlan1[1] >> 11;
+ rss[2] = (uint32_t)vlan1[2] >> 11;
+ rss[3] = (uint32_t)vlan1[3] >> 11;
+ rss = (vector_unsigned_int)vec_perm(rss_flags, (vector_unsigned_char){},
+ *(vector_unsigned_char *)&rss);
+
+ l3_l4e[0] = (uint32_t)vlan1[0] >> 22;
+ l3_l4e[1] = (uint32_t)vlan1[1] >> 22;
+ l3_l4e[2] = (uint32_t)vlan1[2] >> 22;
+ l3_l4e[3] = (uint32_t)vlan1[3] >> 22;
+
+ l3_l4e = (vector_unsigned_int)vec_perm(l3_l4e_flags,
+ (vector_unsigned_char){},
+ *(vector_unsigned_char *)&l3_l4e);
+
+ vlan0 = vec_or(vlan0, rss);
+ vlan0 = vec_or(vlan0, l3_l4e);
+
+ rx_pkts[0]->ol_flags = (uint64_t)vlan0[2];
+ rx_pkts[1]->ol_flags = (uint64_t)vlan0[3];
+ rx_pkts[2]->ol_flags = (uint64_t)vlan0[0];
+ rx_pkts[3]->ol_flags = (uint64_t)vlan0[1];
+}
+
+#define PKTLEN_SHIFT 10
+
+static inline void
+desc_to_ptype_v(vector_unsigned_long_long descs[4], struct rte_mbuf **rx_pkts,
+ uint32_t *ptype_tbl)
+{
+ vector_unsigned_long_long ptype0 = vec_mergel(descs[0], descs[1]);
+ vector_unsigned_long_long ptype1 = vec_mergel(descs[2], descs[3]);
+
+ ptype0[0] = ptype0[0] >> 30;
+ ptype0[1] = ptype0[1] >> 30;
+
+ ptype1[0] = ptype1[0] >> 30;
+ ptype1[1] = ptype1[1] >> 30;
+
+ rx_pkts[0]->packet_type =
+ ptype_tbl[(*(vector_unsigned_char *)&ptype0)[0]];
+ rx_pkts[1]->packet_type =
+ ptype_tbl[(*(vector_unsigned_char *)&ptype0)[8]];
+ rx_pkts[2]->packet_type =
+ ptype_tbl[(*(vector_unsigned_char *)&ptype1)[0]];
+ rx_pkts[3]->packet_type =
+ ptype_tbl[(*(vector_unsigned_char *)&ptype1)[8]];
+}
+
+ /* Notice:
+ * - nb_pkts < RTE_I40E_DESCS_PER_LOOP, just return no packet
+ * - nb_pkts > RTE_I40E_VPMD_RX_BURST, only scan RTE_I40E_VPMD_RX_BURST
+ * numbers of DD bits
+ */
+static inline uint16_t
+_recv_raw_pkts_vec(struct i40e_rx_queue *rxq, struct rte_mbuf **rx_pkts,
+ uint16_t nb_pkts, uint8_t *split_packet)
+{
+ volatile union i40e_rx_desc *rxdp;
+ struct i40e_rx_entry *sw_ring;
+ uint16_t nb_pkts_recd;
+ int pos;
+ uint64_t var;
+ vector_unsigned_char shuf_msk;
+ uint32_t *ptype_tbl = rxq->vsi->adapter->ptype_tbl;
+
+ vector_unsigned_short crc_adjust = (vector_unsigned_short){
+ 0, 0, /* ignore pkt_type field */
+ rxq->crc_len, /* sub crc on pkt_len */
+ 0, /* ignore high-16bits of pkt_len */
+ rxq->crc_len, /* sub crc on data_len */
+ 0, 0, 0 /* ignore non-length fields */
+ };
+ vector_unsigned_long_long dd_check, eop_check;
+
+ /* nb_pkts shall be less equal than RTE_I40E_MAX_RX_BURST */
+ nb_pkts = RTE_MIN(nb_pkts, RTE_I40E_MAX_RX_BURST);
+
+ /* nb_pkts has to be floor-aligned to RTE_I40E_DESCS_PER_LOOP */
+ nb_pkts = RTE_ALIGN_FLOOR(nb_pkts, RTE_I40E_DESCS_PER_LOOP);
+
+ /* Just the act of getting into the function from the application is
+ * going to cost about 7 cycles
+ */
+ rxdp = rxq->rx_ring + rxq->rx_tail;
+
+ rte_prefetch0(rxdp);
+
+ /* See if we need to rearm the RX queue - gives the prefetch a bit
+ * of time to act
+ */
+ if (rxq->rxrearm_nb > RTE_I40E_RXQ_REARM_THRESH)
+ i40e_rxq_rearm(rxq);
+
+ /* Before we start moving massive data around, check to see if
+ * there is actually a packet available
+ */
+ if (!(rxdp->wb.qword1.status_error_len &
+ rte_cpu_to_le_32(1 << I40E_RX_DESC_STATUS_DD_SHIFT)))
+ return 0;
+
+ /* 4 packets DD mask */
+ dd_check = (vector_unsigned_long_long){0x0000000100000001ULL,
+ 0x0000000100000001ULL};
+
+ /* 4 packets EOP mask */
+ eop_check = (vector_unsigned_long_long){0x0000000200000002ULL,
+ 0x0000000200000002ULL};
+
+ /* mask to shuffle from desc. to mbuf */
+ shuf_msk = (vector_unsigned_char){
+ 0xFF, 0xFF, /* pkt_type set as unknown */
+ 0xFF, 0xFF, /* pkt_type set as unknown */
+ 14, 15, /* octet 15~14, low 16 bits pkt_len */
+ 0xFF, 0xFF, /* skip high 16 bits pkt_len, zero out */
+ 14, 15, /* octet 15~14, 16 bits data_len */
+ 2, 3, /* octet 2~3, low 16 bits vlan_macip */
+ 4, 5, 6, 7 /* octet 4~7, 32bits rss */
+ };
+
+ /* Cache is empty -> need to scan the buffer rings, but first move
+ * the next 'n' mbufs into the cache
+ */
+ sw_ring = &rxq->sw_ring[rxq->rx_tail];
+
+ /* A. load 4 packet in one loop
+ * [A*. mask out 4 unused dirty field in desc]
+ * B. copy 4 mbuf point from swring to rx_pkts
+ * C. calc the number of DD bits among the 4 packets
+ * [C*. extract the end-of-packet bit, if requested]
+ * D. fill info. from desc to mbuf
+ */
+
+ for (pos = 0, nb_pkts_recd = 0; pos < nb_pkts;
+ pos += RTE_I40E_DESCS_PER_LOOP,
+ rxdp += RTE_I40E_DESCS_PER_LOOP) {
+ vector_unsigned_long_long descs[RTE_I40E_DESCS_PER_LOOP];
+ vector_unsigned_char pkt_mb1, pkt_mb2, pkt_mb3, pkt_mb4;
+ vector_unsigned_short staterr, sterr_tmp1, sterr_tmp2;
+ vector_unsigned_long_long mbp1, mbp2; /* two mbuf pointer
+ * in one XMM reg.
+ */
+
+ /* B.1 load 1 mbuf point */
+ mbp1 = *(vector_unsigned_long_long *)&sw_ring[pos];
+ /* Read desc statuses backwards to avoid race condition */
+ /* A.1 load 4 pkts desc */
+ descs[3] = *(vector_unsigned_long_long *)(rxdp + 3);
+ rte_compiler_barrier();
+
+ /* B.2 copy 2 mbuf point into rx_pkts */
+ *(vector_unsigned_long_long *)&rx_pkts[pos] = mbp1;
+
+ /* B.1 load 1 mbuf point */
+ mbp2 = *(vector_unsigned_long_long *)&sw_ring[pos + 2];
+
+ descs[2] = *(vector_unsigned_long_long *)(rxdp + 2);
+ rte_compiler_barrier();
+ /* B.1 load 2 mbuf point */
+ descs[1] = *(vector_unsigned_long_long *)(rxdp + 1);
+ rte_compiler_barrier();
+ descs[0] = *(vector_unsigned_long_long *)(rxdp);
+
+ /* B.2 copy 2 mbuf point into rx_pkts */
+ *(vector_unsigned_long_long *)&rx_pkts[pos + 2] = mbp2;
+
+ if (split_packet) {
+ rte_mbuf_prefetch_part2(rx_pkts[pos]);
+ rte_mbuf_prefetch_part2(rx_pkts[pos + 1]);
+ rte_mbuf_prefetch_part2(rx_pkts[pos + 2]);
+ rte_mbuf_prefetch_part2(rx_pkts[pos + 3]);
+ }
+
+ /* avoid compiler reorder optimization */
+ rte_compiler_barrier();
+
+ /* pkt 3,4 shift the pktlen field to be 16-bit aligned*/
+ vector_unsigned_int len3_temp = vec_xld2(0,
+ (unsigned int *)&descs[3]);
+ len3_temp[3] = len3_temp[3] << PKTLEN_SHIFT;
+ const vector_unsigned_int len3 = len3_temp;
+
+ vector_unsigned_int len2_temp = vec_xld2(0,
+ (unsigned int *)&descs[2]);
+ len2_temp[3] = len2_temp[3] << PKTLEN_SHIFT;
+ const vector_unsigned_int len2 = len2_temp;
+
+ /* merge the now-aligned packet length fields back in */
+ descs[3] = (vector_unsigned_long_long)len3;
+ descs[2] = (vector_unsigned_long_long)len2;
+
+ /* D.1 pkt 3,4 convert format from desc to pktmbuf */
+ pkt_mb4 = vec_perm((vector_unsigned_char)descs[3],
+ (vector_unsigned_char){}, shuf_msk);
+ pkt_mb3 = vec_perm((vector_unsigned_char)descs[2],
+ (vector_unsigned_char){}, shuf_msk);
+
+ /* C.1 4=>2 filter staterr info only */
+ sterr_tmp2 = vec_mergel((vector_unsigned_short)descs[3],
+ (vector_unsigned_short)descs[2]);
+ /* C.1 4=>2 filter staterr info only */
+ sterr_tmp1 = vec_mergel((vector_unsigned_short)descs[1],
+ (vector_unsigned_short)descs[0]);
+ /* D.2 pkt 3,4 set in_port/nb_seg and remove crc */
+ pkt_mb4 = (vector_unsigned_char)((vector_unsigned_short)pkt_mb4
+ - crc_adjust);
+ pkt_mb3 = (vector_unsigned_char)((vector_unsigned_short)pkt_mb3
+ - crc_adjust);
+
+ /* pkt 1,2 shift the pktlen field to be 16-bit aligned*/
+ const vector_unsigned_int len1 =
+ vec_sll(vec_xld2(0, (unsigned int *)&descs[1]),
+ (vector_unsigned_int){0, 0, 0, PKTLEN_SHIFT});
+ const vector_unsigned_int len0 =
+ vec_sll(vec_xld2(0, (unsigned int *)&descs[0]),
+ (vector_unsigned_int){0, 0, 0, PKTLEN_SHIFT});
+
+ /* merge the now-aligned packet length fields back in */
+ descs[1] = (vector_unsigned_long_long)len1;
+ descs[0] = (vector_unsigned_long_long)len0;
+
+ /* D.1 pkt 1,2 convert format from desc to pktmbuf */
+ pkt_mb2 = vec_perm((vector_unsigned_char)descs[1],
+ (vector_unsigned_char){}, shuf_msk);
+ pkt_mb1 = vec_perm((vector_unsigned_char)descs[0],
+ (vector_unsigned_char){}, shuf_msk);
+
+ /* C.2 get 4 pkts staterr value */
+ staterr = (vector_unsigned_short)vec_mergeh(sterr_tmp1,
+ sterr_tmp2);
+
+ /* D.3 copy final 3,4 data to rx_pkts */
+ vec_xstd2(pkt_mb4, 0, (unsigned char *)&rx_pkts[pos + 3]
+ ->rx_descriptor_fields1);
+ vec_xstd2(pkt_mb3, 0, (unsigned char *)&rx_pkts[pos + 2]
+ ->rx_descriptor_fields1);
+
+ /* D.2 pkt 1,2 set in_port/nb_seg and remove crc */
+ pkt_mb2 = (vector_unsigned_char)((vector_unsigned_short)pkt_mb2
+ - crc_adjust);
+ pkt_mb1 = (vector_unsigned_char)((vector_unsigned_short)pkt_mb1
+ - crc_adjust);
+
+ /* C* extract and record EOP bit */
+ if (split_packet) {
+ vector_unsigned_char eop_shuf_mask =
+ (vector_unsigned_char){
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0x04, 0x0C, 0x00, 0x08
+ };
+
+ /* and with mask to extract bits, flipping 1-0 */
+ vector_unsigned_char eop_bits =
+ vec_and((vector_unsigned_char)vec_nor(staterr,
+ staterr), (vector_unsigned_char)eop_check);
+ /* the staterr values are not in order, as the count
+ * count of dd bits doesn't care. However, for end of
+ * packet tracking, we do care, so shuffle. This also
+ * compresses the 32-bit values to 8-bit
+ */
+ eop_bits = vec_perm(eop_bits, (vector_unsigned_char){},
+ eop_shuf_mask);
+ /* store the resulting 32-bit value */
+ *split_packet = (vec_xld2(0,
+ (unsigned int *)&eop_bits))[0];
+ split_packet += RTE_I40E_DESCS_PER_LOOP;
+
+ /* zero-out next pointers */
+ rx_pkts[pos]->next = NULL;
+ rx_pkts[pos + 1]->next = NULL;
+ rx_pkts[pos + 2]->next = NULL;
+ rx_pkts[pos + 3]->next = NULL;
+ }
+
+ /* C.3 calc available number of desc */
+ staterr = vec_and(staterr, (vector_unsigned_short)dd_check);
+
+ /* D.3 copy final 1,2 data to rx_pkts */
+ vec_xstd2(pkt_mb2, 0, (unsigned char *)&rx_pkts[pos + 1]
+ ->rx_descriptor_fields1);
+ vec_xstd2(pkt_mb1, 0, (unsigned char *)&rx_pkts[pos]
+ ->rx_descriptor_fields1);
+
+ desc_to_ptype_v(descs, &rx_pkts[pos], ptype_tbl);
+ desc_to_olflags_v(descs, &rx_pkts[pos]);
+
+ /* C.4 calc avaialbe number of desc */
+ var = __builtin_popcountll((vec_xld2(0,
+ (unsigned long long *)&staterr)[0]));
+ nb_pkts_recd += var;
+ if (likely(var != RTE_I40E_DESCS_PER_LOOP))
+ break;
+ }
+
+ /* Update our internal tail pointer */
+ rxq->rx_tail = (uint16_t)(rxq->rx_tail + nb_pkts_recd);
+ rxq->rx_tail = (uint16_t)(rxq->rx_tail & (rxq->nb_rx_desc - 1));
+ rxq->rxrearm_nb = (uint16_t)(rxq->rxrearm_nb + nb_pkts_recd);
+
+ return nb_pkts_recd;
+}
+
+ /* Notice:
+ * - nb_pkts < RTE_I40E_DESCS_PER_LOOP, just return no packet
+ * - nb_pkts > RTE_I40E_VPMD_RX_BURST, only scan RTE_I40E_VPMD_RX_BURST
+ * numbers of DD bits
+ */
+uint16_t
+i40e_recv_pkts_vec(void *rx_queue, struct rte_mbuf **rx_pkts,
+ uint16_t nb_pkts)
+{
+ return _recv_raw_pkts_vec(rx_queue, rx_pkts, nb_pkts, NULL);
+}
+
+ /* vPMD receive routine that reassembles scattered packets
+ * Notice:
+ * - nb_pkts < RTE_I40E_DESCS_PER_LOOP, just return no packet
+ * - nb_pkts > RTE_I40E_VPMD_RX_BURST, only scan RTE_I40E_VPMD_RX_BURST
+ * numbers of DD bits
+ */
+uint16_t
+i40e_recv_scattered_pkts_vec(void *rx_queue, struct rte_mbuf **rx_pkts,
+ uint16_t nb_pkts)
+{
+ struct i40e_rx_queue *rxq = rx_queue;
+ uint8_t split_flags[RTE_I40E_VPMD_RX_BURST] = {0};
+
+ /* get some new buffers */
+ uint16_t nb_bufs = _recv_raw_pkts_vec(rxq, rx_pkts, nb_pkts,
+ split_flags);
+ if (nb_bufs == 0)
+ return 0;
+
+ /* happy day case, full burst + no packets to be joined */
+ const uint64_t *split_fl64 = (uint64_t *)split_flags;
+
+ if (rxq->pkt_first_seg == NULL &&
+ split_fl64[0] == 0 && split_fl64[1] == 0 &&
+ split_fl64[2] == 0 && split_fl64[3] == 0)
+ return nb_bufs;
+
+ /* reassemble any packets that need reassembly*/
+ unsigned int i = 0;
+
+ if (!rxq->pkt_first_seg) {
+ /* find the first split flag, and only reassemble then*/
+ while (i < nb_bufs && !split_flags[i])
+ i++;
+ if (i == nb_bufs)
+ return nb_bufs;
+ }
+ return i + reassemble_packets(rxq, &rx_pkts[i], nb_bufs - i,
+ &split_flags[i]);
+}
+
+static inline void
+vtx1(volatile struct i40e_tx_desc *txdp,
+ struct rte_mbuf *pkt, uint64_t flags)
+{
+ uint64_t high_qw = (I40E_TX_DESC_DTYPE_DATA |
+ ((uint64_t)flags << I40E_TXD_QW1_CMD_SHIFT) |
+ ((uint64_t)pkt->data_len << I40E_TXD_QW1_TX_BUF_SZ_SHIFT));
+
+ vector_unsigned_long_long descriptor = (vector_unsigned_long_long){
+ pkt->buf_iova + pkt->data_off, high_qw};
+ *(vector_unsigned_long_long *)txdp = descriptor;
+}
+
+static inline void
+vtx(volatile struct i40e_tx_desc *txdp,
+ struct rte_mbuf **pkt, uint16_t nb_pkts, uint64_t flags)
+{
+ int i;
+
+ for (i = 0; i < nb_pkts; ++i, ++txdp, ++pkt)
+ vtx1(txdp, *pkt, flags);
+}
+
+uint16_t
+i40e_xmit_fixed_burst_vec(void *tx_queue, struct rte_mbuf **tx_pkts,
+ uint16_t nb_pkts)
+{
+ struct i40e_tx_queue *txq = (struct i40e_tx_queue *)tx_queue;
+ volatile struct i40e_tx_desc *txdp;
+ struct i40e_tx_entry *txep;
+ uint16_t n, nb_commit, tx_id;
+ uint64_t flags = I40E_TD_CMD;
+ uint64_t rs = I40E_TX_DESC_CMD_RS | I40E_TD_CMD;
+ int i;
+
+ /* cross rx_thresh boundary is not allowed */
+ nb_pkts = RTE_MIN(nb_pkts, txq->tx_rs_thresh);
+
+ if (txq->nb_tx_free < txq->tx_free_thresh)
+ i40e_tx_free_bufs(txq);
+
+ nb_pkts = (uint16_t)RTE_MIN(txq->nb_tx_free, nb_pkts);
+ nb_commit = nb_pkts;
+ if (unlikely(nb_pkts == 0))
+ return 0;
+
+ tx_id = txq->tx_tail;
+ txdp = &txq->tx_ring[tx_id];
+ txep = &txq->sw_ring[tx_id];
+
+ txq->nb_tx_free = (uint16_t)(txq->nb_tx_free - nb_pkts);
+
+ n = (uint16_t)(txq->nb_tx_desc - tx_id);
+ if (nb_commit >= n) {
+ tx_backlog_entry(txep, tx_pkts, n);
+
+ for (i = 0; i < n - 1; ++i, ++tx_pkts, ++txdp)
+ vtx1(txdp, *tx_pkts, flags);
+
+ vtx1(txdp, *tx_pkts++, rs);
+
+ nb_commit = (uint16_t)(nb_commit - n);
+
+ tx_id = 0;
+ txq->tx_next_rs = (uint16_t)(txq->tx_rs_thresh - 1);
+
+ /* avoid reach the end of ring */
+ txdp = &txq->tx_ring[tx_id];
+ txep = &txq->sw_ring[tx_id];
+ }
+
+ tx_backlog_entry(txep, tx_pkts, nb_commit);
+
+ vtx(txdp, tx_pkts, nb_commit, flags);
+
+ tx_id = (uint16_t)(tx_id + nb_commit);
+ if (tx_id > txq->tx_next_rs) {
+ txq->tx_ring[txq->tx_next_rs].cmd_type_offset_bsz |=
+ rte_cpu_to_le_64(((uint64_t)I40E_TX_DESC_CMD_RS) <<
+ I40E_TXD_QW1_CMD_SHIFT);
+ txq->tx_next_rs =
+ (uint16_t)(txq->tx_next_rs + txq->tx_rs_thresh);
+ }
+
+ txq->tx_tail = tx_id;
+
+ I40E_PCI_REG_WRITE(txq->qtx_tail, txq->tx_tail);
+
+ return nb_pkts;
+}
+
+void __attribute__((cold))
+i40e_rx_queue_release_mbufs_vec(struct i40e_rx_queue *rxq)
+{
+ _i40e_rx_queue_release_mbufs_vec(rxq);
+}
+
+int __attribute__((cold))
+i40e_rxq_vec_setup(struct i40e_rx_queue *rxq)
+{
+ return i40e_rxq_vec_setup_default(rxq);
+}
+
+int __attribute__((cold))
+i40e_txq_vec_setup(struct i40e_tx_queue __rte_unused * txq)
+{
+ return 0;
+}
+
+int __attribute__((cold))
+i40e_rx_vec_dev_conf_condition_check(struct rte_eth_dev *dev)
+{
+ return i40e_rx_vec_dev_conf_condition_check_default(dev);
+}
--
2.17.1
^ permalink raw reply [flat|nested] 80+ messages in thread
* [dpdk-dev] [RFC 07/12] test: add support for s390x architecture
2019-04-09 19:06 [dpdk-dev] [RFC 00/12] introduce s390x architecture Vivian Kong
` (6 preceding siblings ...)
2019-04-09 19:06 ` [dpdk-dev] [RFC 06/12] net/i40e: " Vivian Kong
@ 2019-04-09 19:06 ` Vivian Kong
2019-04-09 19:06 ` Vivian Kong
2019-04-09 19:06 ` [dpdk-dev] [RFC 08/12] hash: " Vivian Kong
` (7 subsequent siblings)
15 siblings, 1 reply; 80+ messages in thread
From: Vivian Kong @ 2019-04-09 19:06 UTC (permalink / raw)
To: dev
Add big endian support for s390x architecture.
Signed-off-by: Vivian Kong <vivkong@ca.ibm.com>
---
app/test/test_cmdline_ipaddr.c | 13 +++-
app/test/test_cmdline_num.c | 111 +++++++++++++++++++++++++++++++++
app/test/test_xmmt_ops.h | 14 +++++
3 files changed, 137 insertions(+), 1 deletion(-)
diff --git a/app/test/test_cmdline_ipaddr.c b/app/test/test_cmdline_ipaddr.c
index 8ee7f6288..5e7629bba 100644
--- a/app/test/test_cmdline_ipaddr.c
+++ b/app/test/test_cmdline_ipaddr.c
@@ -6,6 +6,7 @@
#include <string.h>
#include <inttypes.h>
#include <netinet/in.h>
+#include <rte_byteorder.h>
#ifndef __linux__
#ifndef __FreeBSD__
@@ -22,7 +23,8 @@
#include "test_cmdline.h"
-#define IP4(a,b,c,d) {((uint32_t)(((a) & 0xff)) | \
+#if RTE_BYTE_ORDER == RTE_LITTLE_ENDIAN
+#define IP4(a, b, c, d) {((uint32_t)(((a) & 0xff)) | \
(((b) & 0xff) << 8) | \
(((c) & 0xff) << 16) | \
((d) & 0xff) << 24)}
@@ -30,6 +32,15 @@
#define U16_SWAP(x) \
(((x & 0xFF) << 8) | ((x & 0xFF00) >> 8))
+#else
+#define IP4(a, b, c, d) {((uint32_t)(((a) & 0xff) << 24) | \
+ (((b) & 0xff) << 16) | \
+ (((c) & 0xff) << 8) | \
+ ((d) & 0xff))}
+
+#define U16_SWAP(x) x
+#endif
+
/* create IPv6 address, swapping bytes where needed */
#ifndef s6_addr16
# define s6_addr16 __u6_addr.__u6_addr16
diff --git a/app/test/test_cmdline_num.c b/app/test/test_cmdline_num.c
index 4c97caf3d..9e80397ac 100644
--- a/app/test/test_cmdline_num.c
+++ b/app/test/test_cmdline_num.c
@@ -11,6 +11,8 @@
#include <cmdline_parse.h>
#include <cmdline_parse_num.h>
+
+#include <rte_byteorder.h>
#include "test_cmdline.h"
struct num_unsigned_str {
@@ -451,6 +453,48 @@ test_parse_num_valid(void)
/* check if result matches what it should have matched
* since unsigned numbers don't care about number of bits, we can just convert
* everything to uint64_t without any worries. */
+ #if RTE_BYTE_ORDER == RTE_BIG_ENDIAN
+ switch (type) {
+ case UINT8:
+ {
+ uint8_t *temp = (uint8_t *)&result;
+ result = *temp;
+ break;
+ }
+ case UINT16:
+ {
+ uint16_t *temp = (uint16_t *)&result;
+ result = *temp;
+ break;
+ }
+ case UINT32:
+ {
+ uint32_t *temp = (uint32_t *)&result;
+ result = *temp;
+ break;
+ }
+ case INT8:
+ {
+ int8_t *temp = (int8_t *)&result;
+ result = *temp;
+ break;
+ }
+ case INT16:
+ {
+ int16_t *temp = (int16_t *)&result;
+ result = *temp;
+ break;
+ }
+ case INT32:
+ {
+ int32_t *temp = (int32_t *)&result;
+ result = *temp;
+ break;
+ }
+ default:
+ break;
+ }
+ #endif
if (ret > 0 && num_valid_positive_strs[i].result != result) {
printf("Error: parsing %s as %s failed: result mismatch!\n",
num_valid_positive_strs[i].str, buf);
@@ -480,6 +524,7 @@ test_parse_num_valid(void)
* the result is signed in this case, so we have to account for that */
if (ret > 0) {
/* detect negative */
+ #if RTE_BYTE_ORDER == RTE_LITTLE_ENDIAN
switch (type) {
case INT8:
result = (int8_t) result;
@@ -493,6 +538,30 @@ test_parse_num_valid(void)
default:
break;
}
+ #else
+ switch (type) {
+ case INT8:
+ {
+ int8_t *temp = (int8_t *)&result;
+ result = *temp;
+ break;
+ }
+ case INT16:
+ {
+ int16_t *temp = (int16_t *)&result;
+ result = *temp;
+ break;
+ }
+ case INT32:
+ {
+ int32_t *temp = (int32_t *)&result;
+ result = *temp;
+ break;
+ }
+ default:
+ break;
+ }
+ #endif
if (num_valid_negative_strs[i].result == (int64_t) result)
continue;
printf("Error: parsing %s as %s failed: result mismatch!\n",
@@ -529,6 +598,48 @@ test_parse_num_valid(void)
/* check if result matches what it should have matched
* since unsigned numbers don't care about number of bits, we can just convert
* everything to uint64_t without any worries. */
+ #if RTE_BYTE_ORDER == RTE_BIG_ENDIAN
+ switch (type) {
+ case UINT8:
+ {
+ uint8_t *temp = (uint8_t *)&result;
+ result = *temp;
+ break;
+ }
+ case UINT16:
+ {
+ uint16_t *temp = (uint16_t *)&result;
+ result = *temp;
+ break;
+ }
+ case UINT32:
+ {
+ uint32_t *temp = (uint32_t *)&result;
+ result = *temp;
+ break;
+ }
+ case INT8:
+ {
+ int8_t *temp = (int8_t *)&result;
+ result = *temp;
+ break;
+ }
+ case INT16:
+ {
+ int16_t *temp = (int16_t *)&result;
+ result = *temp;
+ break;
+ }
+ case INT32:
+ {
+ int32_t *temp = (int32_t *)&result;
+ result = *temp;
+ break;
+ }
+ default:
+ break;
+ }
+ #endif
if (ret > 0 && num_garbage_positive_strs[i].result != result) {
printf("Error: parsing %s as %s failed: result mismatch!\n",
num_garbage_positive_strs[i].str, buf);
diff --git a/app/test/test_xmmt_ops.h b/app/test/test_xmmt_ops.h
index 8bcf0b261..6d8cd1998 100644
--- a/app/test/test_xmmt_ops.h
+++ b/app/test/test_xmmt_ops.h
@@ -49,6 +49,20 @@ vect_set_epi32(int i3, int i2, int i1, int i0)
return data;
}
+#elif defined(RTE_ARCH_S390X)
+
+/* loads the xmm_t value from address p(does not need to be 16-byte aligned)*/
+#define vect_loadu_sil128(p) vec_xld2(0, (signed int *)p)
+
+/* sets the 4 signed 32-bit integer values and returns the xmm_t variable */
+static __rte_always_inline xmm_t
+vect_set_epi32(int i3, int i2, int i1, int i0)
+{
+ xmm_t data = (xmm_t){i0, i1, i2, i3};
+
+ return data;
+}
+
#endif
#endif /* _TEST_XMMT_OPS_H_ */
--
2.17.1
^ permalink raw reply [flat|nested] 80+ messages in thread
* [dpdk-dev] [RFC 07/12] test: add support for s390x architecture
2019-04-09 19:06 ` [dpdk-dev] [RFC 07/12] test: " Vivian Kong
@ 2019-04-09 19:06 ` Vivian Kong
0 siblings, 0 replies; 80+ messages in thread
From: Vivian Kong @ 2019-04-09 19:06 UTC (permalink / raw)
To: dev
Add big endian support for s390x architecture.
Signed-off-by: Vivian Kong <vivkong@ca.ibm.com>
---
app/test/test_cmdline_ipaddr.c | 13 +++-
app/test/test_cmdline_num.c | 111 +++++++++++++++++++++++++++++++++
app/test/test_xmmt_ops.h | 14 +++++
3 files changed, 137 insertions(+), 1 deletion(-)
diff --git a/app/test/test_cmdline_ipaddr.c b/app/test/test_cmdline_ipaddr.c
index 8ee7f6288..5e7629bba 100644
--- a/app/test/test_cmdline_ipaddr.c
+++ b/app/test/test_cmdline_ipaddr.c
@@ -6,6 +6,7 @@
#include <string.h>
#include <inttypes.h>
#include <netinet/in.h>
+#include <rte_byteorder.h>
#ifndef __linux__
#ifndef __FreeBSD__
@@ -22,7 +23,8 @@
#include "test_cmdline.h"
-#define IP4(a,b,c,d) {((uint32_t)(((a) & 0xff)) | \
+#if RTE_BYTE_ORDER == RTE_LITTLE_ENDIAN
+#define IP4(a, b, c, d) {((uint32_t)(((a) & 0xff)) | \
(((b) & 0xff) << 8) | \
(((c) & 0xff) << 16) | \
((d) & 0xff) << 24)}
@@ -30,6 +32,15 @@
#define U16_SWAP(x) \
(((x & 0xFF) << 8) | ((x & 0xFF00) >> 8))
+#else
+#define IP4(a, b, c, d) {((uint32_t)(((a) & 0xff) << 24) | \
+ (((b) & 0xff) << 16) | \
+ (((c) & 0xff) << 8) | \
+ ((d) & 0xff))}
+
+#define U16_SWAP(x) x
+#endif
+
/* create IPv6 address, swapping bytes where needed */
#ifndef s6_addr16
# define s6_addr16 __u6_addr.__u6_addr16
diff --git a/app/test/test_cmdline_num.c b/app/test/test_cmdline_num.c
index 4c97caf3d..9e80397ac 100644
--- a/app/test/test_cmdline_num.c
+++ b/app/test/test_cmdline_num.c
@@ -11,6 +11,8 @@
#include <cmdline_parse.h>
#include <cmdline_parse_num.h>
+
+#include <rte_byteorder.h>
#include "test_cmdline.h"
struct num_unsigned_str {
@@ -451,6 +453,48 @@ test_parse_num_valid(void)
/* check if result matches what it should have matched
* since unsigned numbers don't care about number of bits, we can just convert
* everything to uint64_t without any worries. */
+ #if RTE_BYTE_ORDER == RTE_BIG_ENDIAN
+ switch (type) {
+ case UINT8:
+ {
+ uint8_t *temp = (uint8_t *)&result;
+ result = *temp;
+ break;
+ }
+ case UINT16:
+ {
+ uint16_t *temp = (uint16_t *)&result;
+ result = *temp;
+ break;
+ }
+ case UINT32:
+ {
+ uint32_t *temp = (uint32_t *)&result;
+ result = *temp;
+ break;
+ }
+ case INT8:
+ {
+ int8_t *temp = (int8_t *)&result;
+ result = *temp;
+ break;
+ }
+ case INT16:
+ {
+ int16_t *temp = (int16_t *)&result;
+ result = *temp;
+ break;
+ }
+ case INT32:
+ {
+ int32_t *temp = (int32_t *)&result;
+ result = *temp;
+ break;
+ }
+ default:
+ break;
+ }
+ #endif
if (ret > 0 && num_valid_positive_strs[i].result != result) {
printf("Error: parsing %s as %s failed: result mismatch!\n",
num_valid_positive_strs[i].str, buf);
@@ -480,6 +524,7 @@ test_parse_num_valid(void)
* the result is signed in this case, so we have to account for that */
if (ret > 0) {
/* detect negative */
+ #if RTE_BYTE_ORDER == RTE_LITTLE_ENDIAN
switch (type) {
case INT8:
result = (int8_t) result;
@@ -493,6 +538,30 @@ test_parse_num_valid(void)
default:
break;
}
+ #else
+ switch (type) {
+ case INT8:
+ {
+ int8_t *temp = (int8_t *)&result;
+ result = *temp;
+ break;
+ }
+ case INT16:
+ {
+ int16_t *temp = (int16_t *)&result;
+ result = *temp;
+ break;
+ }
+ case INT32:
+ {
+ int32_t *temp = (int32_t *)&result;
+ result = *temp;
+ break;
+ }
+ default:
+ break;
+ }
+ #endif
if (num_valid_negative_strs[i].result == (int64_t) result)
continue;
printf("Error: parsing %s as %s failed: result mismatch!\n",
@@ -529,6 +598,48 @@ test_parse_num_valid(void)
/* check if result matches what it should have matched
* since unsigned numbers don't care about number of bits, we can just convert
* everything to uint64_t without any worries. */
+ #if RTE_BYTE_ORDER == RTE_BIG_ENDIAN
+ switch (type) {
+ case UINT8:
+ {
+ uint8_t *temp = (uint8_t *)&result;
+ result = *temp;
+ break;
+ }
+ case UINT16:
+ {
+ uint16_t *temp = (uint16_t *)&result;
+ result = *temp;
+ break;
+ }
+ case UINT32:
+ {
+ uint32_t *temp = (uint32_t *)&result;
+ result = *temp;
+ break;
+ }
+ case INT8:
+ {
+ int8_t *temp = (int8_t *)&result;
+ result = *temp;
+ break;
+ }
+ case INT16:
+ {
+ int16_t *temp = (int16_t *)&result;
+ result = *temp;
+ break;
+ }
+ case INT32:
+ {
+ int32_t *temp = (int32_t *)&result;
+ result = *temp;
+ break;
+ }
+ default:
+ break;
+ }
+ #endif
if (ret > 0 && num_garbage_positive_strs[i].result != result) {
printf("Error: parsing %s as %s failed: result mismatch!\n",
num_garbage_positive_strs[i].str, buf);
diff --git a/app/test/test_xmmt_ops.h b/app/test/test_xmmt_ops.h
index 8bcf0b261..6d8cd1998 100644
--- a/app/test/test_xmmt_ops.h
+++ b/app/test/test_xmmt_ops.h
@@ -49,6 +49,20 @@ vect_set_epi32(int i3, int i2, int i1, int i0)
return data;
}
+#elif defined(RTE_ARCH_S390X)
+
+/* loads the xmm_t value from address p(does not need to be 16-byte aligned)*/
+#define vect_loadu_sil128(p) vec_xld2(0, (signed int *)p)
+
+/* sets the 4 signed 32-bit integer values and returns the xmm_t variable */
+static __rte_always_inline xmm_t
+vect_set_epi32(int i3, int i2, int i1, int i0)
+{
+ xmm_t data = (xmm_t){i0, i1, i2, i3};
+
+ return data;
+}
+
#endif
#endif /* _TEST_XMMT_OPS_H_ */
--
2.17.1
^ permalink raw reply [flat|nested] 80+ messages in thread
* [dpdk-dev] [RFC 08/12] hash: add support for s390x architecture
2019-04-09 19:06 [dpdk-dev] [RFC 00/12] introduce s390x architecture Vivian Kong
` (7 preceding siblings ...)
2019-04-09 19:06 ` [dpdk-dev] [RFC 07/12] test: " Vivian Kong
@ 2019-04-09 19:06 ` Vivian Kong
2019-04-09 19:06 ` Vivian Kong
2019-04-15 20:43 ` Dharmik Thakkar
2019-04-09 19:06 ` [dpdk-dev] [RFC 09/12] doc: introduce " Vivian Kong
` (6 subsequent siblings)
15 siblings, 2 replies; 80+ messages in thread
From: Vivian Kong @ 2019-04-09 19:06 UTC (permalink / raw)
To: dev
Add big endian support for s390x architecture.
Signed-off-by: Vivian Kong <vivkong@ca.ibm.com>
---
lib/librte_hash/rte_fbk_hash.h | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/lib/librte_hash/rte_fbk_hash.h b/lib/librte_hash/rte_fbk_hash.h
index c4d6976d2..5e49950a7 100644
--- a/lib/librte_hash/rte_fbk_hash.h
+++ b/lib/librte_hash/rte_fbk_hash.h
@@ -125,9 +125,16 @@ rte_fbk_hash_add_key_with_bucket(struct rte_fbk_hash_table *ht,
* corrupted due to race conditions, but it's still possible to
* overwrite entries that have just been made valid.
*/
+ #if RTE_BYTE_ORDER == RTE_LITTLE_ENDIAN
const uint64_t new_entry = ((uint64_t)(key) << 32) |
((uint64_t)(value) << 16) |
1; /* 1 = is_entry bit. */
+ #else
+ const uint64_t new_entry =
+ ((uint64_t)(1) << 48) | /* 1 = is_entry bit. */
+ ((uint64_t)(value) << 32) |
+ (uint64_t)(key);
+ #endif
uint32_t i;
for (i = 0; i < ht->entries_per_bucket; i++) {
--
2.17.1
^ permalink raw reply [flat|nested] 80+ messages in thread
* [dpdk-dev] [RFC 08/12] hash: add support for s390x architecture
2019-04-09 19:06 ` [dpdk-dev] [RFC 08/12] hash: " Vivian Kong
@ 2019-04-09 19:06 ` Vivian Kong
2019-04-15 20:43 ` Dharmik Thakkar
1 sibling, 0 replies; 80+ messages in thread
From: Vivian Kong @ 2019-04-09 19:06 UTC (permalink / raw)
To: dev
Add big endian support for s390x architecture.
Signed-off-by: Vivian Kong <vivkong@ca.ibm.com>
---
lib/librte_hash/rte_fbk_hash.h | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/lib/librte_hash/rte_fbk_hash.h b/lib/librte_hash/rte_fbk_hash.h
index c4d6976d2..5e49950a7 100644
--- a/lib/librte_hash/rte_fbk_hash.h
+++ b/lib/librte_hash/rte_fbk_hash.h
@@ -125,9 +125,16 @@ rte_fbk_hash_add_key_with_bucket(struct rte_fbk_hash_table *ht,
* corrupted due to race conditions, but it's still possible to
* overwrite entries that have just been made valid.
*/
+ #if RTE_BYTE_ORDER == RTE_LITTLE_ENDIAN
const uint64_t new_entry = ((uint64_t)(key) << 32) |
((uint64_t)(value) << 16) |
1; /* 1 = is_entry bit. */
+ #else
+ const uint64_t new_entry =
+ ((uint64_t)(1) << 48) | /* 1 = is_entry bit. */
+ ((uint64_t)(value) << 32) |
+ (uint64_t)(key);
+ #endif
uint32_t i;
for (i = 0; i < ht->entries_per_bucket; i++) {
--
2.17.1
^ permalink raw reply [flat|nested] 80+ messages in thread
* [dpdk-dev] [RFC 09/12] doc: introduce s390x architecture
2019-04-09 19:06 [dpdk-dev] [RFC 00/12] introduce s390x architecture Vivian Kong
` (8 preceding siblings ...)
2019-04-09 19:06 ` [dpdk-dev] [RFC 08/12] hash: " Vivian Kong
@ 2019-04-09 19:06 ` Vivian Kong
2019-04-09 19:06 ` Vivian Kong
2019-04-09 20:12 ` Thomas Monjalon
2019-04-09 19:06 ` [dpdk-dev] [RFC 10/12] ethdev: add cast for bus_device Vivian Kong
` (5 subsequent siblings)
15 siblings, 2 replies; 80+ messages in thread
From: Vivian Kong @ 2019-04-09 19:06 UTC (permalink / raw)
To: dev
Signed-off-by: Vivian Kong <vivkong@ca.ibm.com>
---
MAINTAINERS | 9 +++++++++
doc/guides/rel_notes/release_19_05.rst | 3 +++
2 files changed, 12 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 9774344dd..6d4c51215 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -248,6 +248,15 @@ F: lib/librte_eal/common/include/arch/ppc_64/
F: drivers/net/i40e/i40e_rxtx_vec_altivec.c
F: examples/l3fwd/*altivec.h
+Linux on IBM Z (s390x)
+M: Vivian Kong <vivkong@ca.ibm.com.com>
+F: lib/librte_eal/common/arch/s390x/
+F: lib/librte_eal/common/include/arch/s390x/
+F: lib/librte_lpm/rte_lpm_s390x.h
+F: drivers/net/i40e/i40e_rxtx_vec_s390x.c
+F: examples/l3fwd/*s390x.h
+F: mk/arch/s390x/rte.vars.mk
+
Intel x86
M: Bruce Richardson <bruce.richardson@intel.com>
M: Konstantin Ananyev <konstantin.ananyev@intel.com>
diff --git a/doc/guides/rel_notes/release_19_05.rst b/doc/guides/rel_notes/release_19_05.rst
index dbdf07a0c..2e0b39ee5 100644
--- a/doc/guides/rel_notes/release_19_05.rst
+++ b/doc/guides/rel_notes/release_19_05.rst
@@ -155,6 +155,9 @@ New Features
Improved testpmd application performance on ARM platform. For ``macswap``
forwarding mode, NEON intrinsics were used to do swap to save CPU cycles.
+* **Added support for Linux on IBM Z (s390x).**
+
+ Added initial support for Linux on IBM Z (s390x).
Removed Items
-------------
--
2.17.1
^ permalink raw reply [flat|nested] 80+ messages in thread
* [dpdk-dev] [RFC 09/12] doc: introduce s390x architecture
2019-04-09 19:06 ` [dpdk-dev] [RFC 09/12] doc: introduce " Vivian Kong
@ 2019-04-09 19:06 ` Vivian Kong
2019-04-09 20:12 ` Thomas Monjalon
1 sibling, 0 replies; 80+ messages in thread
From: Vivian Kong @ 2019-04-09 19:06 UTC (permalink / raw)
To: dev
Signed-off-by: Vivian Kong <vivkong@ca.ibm.com>
---
MAINTAINERS | 9 +++++++++
doc/guides/rel_notes/release_19_05.rst | 3 +++
2 files changed, 12 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 9774344dd..6d4c51215 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -248,6 +248,15 @@ F: lib/librte_eal/common/include/arch/ppc_64/
F: drivers/net/i40e/i40e_rxtx_vec_altivec.c
F: examples/l3fwd/*altivec.h
+Linux on IBM Z (s390x)
+M: Vivian Kong <vivkong@ca.ibm.com.com>
+F: lib/librte_eal/common/arch/s390x/
+F: lib/librte_eal/common/include/arch/s390x/
+F: lib/librte_lpm/rte_lpm_s390x.h
+F: drivers/net/i40e/i40e_rxtx_vec_s390x.c
+F: examples/l3fwd/*s390x.h
+F: mk/arch/s390x/rte.vars.mk
+
Intel x86
M: Bruce Richardson <bruce.richardson@intel.com>
M: Konstantin Ananyev <konstantin.ananyev@intel.com>
diff --git a/doc/guides/rel_notes/release_19_05.rst b/doc/guides/rel_notes/release_19_05.rst
index dbdf07a0c..2e0b39ee5 100644
--- a/doc/guides/rel_notes/release_19_05.rst
+++ b/doc/guides/rel_notes/release_19_05.rst
@@ -155,6 +155,9 @@ New Features
Improved testpmd application performance on ARM platform. For ``macswap``
forwarding mode, NEON intrinsics were used to do swap to save CPU cycles.
+* **Added support for Linux on IBM Z (s390x).**
+
+ Added initial support for Linux on IBM Z (s390x).
Removed Items
-------------
--
2.17.1
^ permalink raw reply [flat|nested] 80+ messages in thread
* [dpdk-dev] [RFC 10/12] ethdev: add cast for bus_device
2019-04-09 19:06 [dpdk-dev] [RFC 00/12] introduce s390x architecture Vivian Kong
` (9 preceding siblings ...)
2019-04-09 19:06 ` [dpdk-dev] [RFC 09/12] doc: introduce " Vivian Kong
@ 2019-04-09 19:06 ` Vivian Kong
2019-04-09 19:06 ` Vivian Kong
2019-04-09 20:14 ` Thomas Monjalon
2019-04-09 19:06 ` [dpdk-dev] [RFC 11/12] mbuf: trivial fix Vivian Kong
` (4 subsequent siblings)
15 siblings, 2 replies; 80+ messages in thread
From: Vivian Kong @ 2019-04-09 19:06 UTC (permalink / raw)
To: dev
Signed-off-by: Vivian Kong <vivkong@ca.ibm.com>
---
lib/librte_ethdev/rte_ethdev_pci.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/lib/librte_ethdev/rte_ethdev_pci.h b/lib/librte_ethdev/rte_ethdev_pci.h
index 23257e986..80bd120b9 100644
--- a/lib/librte_ethdev/rte_ethdev_pci.h
+++ b/lib/librte_ethdev/rte_ethdev_pci.h
@@ -72,7 +72,7 @@ rte_eth_copy_pci_info(struct rte_eth_dev *eth_dev,
static inline int
eth_dev_pci_specific_init(struct rte_eth_dev *eth_dev, void *bus_device) {
- struct rte_pci_device *pci_dev = bus_device;
+ struct rte_pci_device *pci_dev = (struct rte_pci_device *) bus_device;
if (!pci_dev)
return -ENODEV;
--
2.17.1
^ permalink raw reply [flat|nested] 80+ messages in thread
* [dpdk-dev] [RFC 10/12] ethdev: add cast for bus_device
2019-04-09 19:06 ` [dpdk-dev] [RFC 10/12] ethdev: add cast for bus_device Vivian Kong
@ 2019-04-09 19:06 ` Vivian Kong
2019-04-09 20:14 ` Thomas Monjalon
1 sibling, 0 replies; 80+ messages in thread
From: Vivian Kong @ 2019-04-09 19:06 UTC (permalink / raw)
To: dev
Signed-off-by: Vivian Kong <vivkong@ca.ibm.com>
---
lib/librte_ethdev/rte_ethdev_pci.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/lib/librte_ethdev/rte_ethdev_pci.h b/lib/librte_ethdev/rte_ethdev_pci.h
index 23257e986..80bd120b9 100644
--- a/lib/librte_ethdev/rte_ethdev_pci.h
+++ b/lib/librte_ethdev/rte_ethdev_pci.h
@@ -72,7 +72,7 @@ rte_eth_copy_pci_info(struct rte_eth_dev *eth_dev,
static inline int
eth_dev_pci_specific_init(struct rte_eth_dev *eth_dev, void *bus_device) {
- struct rte_pci_device *pci_dev = bus_device;
+ struct rte_pci_device *pci_dev = (struct rte_pci_device *) bus_device;
if (!pci_dev)
return -ENODEV;
--
2.17.1
^ permalink raw reply [flat|nested] 80+ messages in thread
* [dpdk-dev] [RFC 11/12] mbuf: trivial fix
2019-04-09 19:06 [dpdk-dev] [RFC 00/12] introduce s390x architecture Vivian Kong
` (10 preceding siblings ...)
2019-04-09 19:06 ` [dpdk-dev] [RFC 10/12] ethdev: add cast for bus_device Vivian Kong
@ 2019-04-09 19:06 ` Vivian Kong
2019-04-09 19:06 ` Vivian Kong
2019-04-09 20:13 ` Thomas Monjalon
2019-04-09 19:06 ` [dpdk-dev] [RFC 12/12] test: miscellaneous test fixes Vivian Kong
` (3 subsequent siblings)
15 siblings, 2 replies; 80+ messages in thread
From: Vivian Kong @ 2019-04-09 19:06 UTC (permalink / raw)
To: dev
Signed-off-by: Vivian Kong <vivkong@ca.ibm.com>
---
lib/librte_mbuf/rte_mbuf.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/lib/librte_mbuf/rte_mbuf.h b/lib/librte_mbuf/rte_mbuf.h
index f7886dcb3..7dd2e7fb3 100644
--- a/lib/librte_mbuf/rte_mbuf.h
+++ b/lib/librte_mbuf/rte_mbuf.h
@@ -500,7 +500,7 @@ enum {
RTE_MBUF_OUTL2_LEN_BITS,
#if RTE_BYTE_ORDER == RTE_BIG_ENDIAN
RTE_MBUF_L2_LEN_OFS =
- sizeof(uint64_t) * CHAR_BIT - RTE_MBUF_L2_LEN_BITS
+ sizeof(uint64_t) * CHAR_BIT - RTE_MBUF_L2_LEN_BITS,
RTE_MBUF_L3_LEN_OFS = RTE_MBUF_L2_LEN_OFS - RTE_MBUF_L3_LEN_BITS,
RTE_MBUF_L4_LEN_OFS = RTE_MBUF_L3_LEN_OFS - RTE_MBUF_L4_LEN_BITS,
RTE_MBUF_TSO_SEGSZ_OFS = RTE_MBUF_L4_LEN_OFS - RTE_MBUF_TSO_SEGSZ_BITS,
--
2.17.1
^ permalink raw reply [flat|nested] 80+ messages in thread
* [dpdk-dev] [RFC 11/12] mbuf: trivial fix
2019-04-09 19:06 ` [dpdk-dev] [RFC 11/12] mbuf: trivial fix Vivian Kong
@ 2019-04-09 19:06 ` Vivian Kong
2019-04-09 20:13 ` Thomas Monjalon
1 sibling, 0 replies; 80+ messages in thread
From: Vivian Kong @ 2019-04-09 19:06 UTC (permalink / raw)
To: dev
Signed-off-by: Vivian Kong <vivkong@ca.ibm.com>
---
lib/librte_mbuf/rte_mbuf.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/lib/librte_mbuf/rte_mbuf.h b/lib/librte_mbuf/rte_mbuf.h
index f7886dcb3..7dd2e7fb3 100644
--- a/lib/librte_mbuf/rte_mbuf.h
+++ b/lib/librte_mbuf/rte_mbuf.h
@@ -500,7 +500,7 @@ enum {
RTE_MBUF_OUTL2_LEN_BITS,
#if RTE_BYTE_ORDER == RTE_BIG_ENDIAN
RTE_MBUF_L2_LEN_OFS =
- sizeof(uint64_t) * CHAR_BIT - RTE_MBUF_L2_LEN_BITS
+ sizeof(uint64_t) * CHAR_BIT - RTE_MBUF_L2_LEN_BITS,
RTE_MBUF_L3_LEN_OFS = RTE_MBUF_L2_LEN_OFS - RTE_MBUF_L3_LEN_BITS,
RTE_MBUF_L4_LEN_OFS = RTE_MBUF_L3_LEN_OFS - RTE_MBUF_L4_LEN_BITS,
RTE_MBUF_TSO_SEGSZ_OFS = RTE_MBUF_L4_LEN_OFS - RTE_MBUF_TSO_SEGSZ_BITS,
--
2.17.1
^ permalink raw reply [flat|nested] 80+ messages in thread
* [dpdk-dev] [RFC 12/12] test: miscellaneous test fixes
2019-04-09 19:06 [dpdk-dev] [RFC 00/12] introduce s390x architecture Vivian Kong
` (11 preceding siblings ...)
2019-04-09 19:06 ` [dpdk-dev] [RFC 11/12] mbuf: trivial fix Vivian Kong
@ 2019-04-09 19:06 ` Vivian Kong
2019-04-09 19:06 ` Vivian Kong
2019-04-09 20:25 ` [dpdk-dev] [RFC 00/12] introduce s390x architecture Thomas Monjalon
` (2 subsequent siblings)
15 siblings, 1 reply; 80+ messages in thread
From: Vivian Kong @ 2019-04-09 19:06 UTC (permalink / raw)
To: dev
Minor test case fixes.
Signed-off-by: Vivian Kong <vivkong@ca.ibm.com>
---
app/test/autotest_data.py | 2 +-
app/test/test_cmdline.c | 6 +++---
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/app/test/autotest_data.py b/app/test/autotest_data.py
index db2527489..72c56e528 100644
--- a/app/test/autotest_data.py
+++ b/app/test/autotest_data.py
@@ -175,7 +175,7 @@
"Command": "ticketlock_autotest",
"Func": ticketlock_autotest,
"Report": None,
- }
+ },
{
"Name": "Byte order autotest",
"Command": "byteorder_autotest",
diff --git a/app/test/test_cmdline.c b/app/test/test_cmdline.c
index 115bee966..e0720ff34 100644
--- a/app/test/test_cmdline.c
+++ b/app/test/test_cmdline.c
@@ -10,21 +10,21 @@
static int
test_cmdline(void)
{
- printf("Testind parsing ethernet addresses...\n");
+ printf("Testing parsing ethernet addresses...\n");
if (test_parse_etheraddr_valid() < 0)
return -1;
if (test_parse_etheraddr_invalid_data() < 0)
return -1;
if (test_parse_etheraddr_invalid_param() < 0)
return -1;
- printf("Testind parsing port lists...\n");
+ printf("Testing parsing port lists...\n");
if (test_parse_portlist_valid() < 0)
return -1;
if (test_parse_portlist_invalid_data() < 0)
return -1;
if (test_parse_portlist_invalid_param() < 0)
return -1;
- printf("Testind parsing numbers...\n");
+ printf("Testing parsing numbers...\n");
if (test_parse_num_valid() < 0)
return -1;
if (test_parse_num_invalid_data() < 0)
--
2.17.1
^ permalink raw reply [flat|nested] 80+ messages in thread
* [dpdk-dev] [RFC 12/12] test: miscellaneous test fixes
2019-04-09 19:06 ` [dpdk-dev] [RFC 12/12] test: miscellaneous test fixes Vivian Kong
@ 2019-04-09 19:06 ` Vivian Kong
0 siblings, 0 replies; 80+ messages in thread
From: Vivian Kong @ 2019-04-09 19:06 UTC (permalink / raw)
To: dev
Minor test case fixes.
Signed-off-by: Vivian Kong <vivkong@ca.ibm.com>
---
app/test/autotest_data.py | 2 +-
app/test/test_cmdline.c | 6 +++---
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/app/test/autotest_data.py b/app/test/autotest_data.py
index db2527489..72c56e528 100644
--- a/app/test/autotest_data.py
+++ b/app/test/autotest_data.py
@@ -175,7 +175,7 @@
"Command": "ticketlock_autotest",
"Func": ticketlock_autotest,
"Report": None,
- }
+ },
{
"Name": "Byte order autotest",
"Command": "byteorder_autotest",
diff --git a/app/test/test_cmdline.c b/app/test/test_cmdline.c
index 115bee966..e0720ff34 100644
--- a/app/test/test_cmdline.c
+++ b/app/test/test_cmdline.c
@@ -10,21 +10,21 @@
static int
test_cmdline(void)
{
- printf("Testind parsing ethernet addresses...\n");
+ printf("Testing parsing ethernet addresses...\n");
if (test_parse_etheraddr_valid() < 0)
return -1;
if (test_parse_etheraddr_invalid_data() < 0)
return -1;
if (test_parse_etheraddr_invalid_param() < 0)
return -1;
- printf("Testind parsing port lists...\n");
+ printf("Testing parsing port lists...\n");
if (test_parse_portlist_valid() < 0)
return -1;
if (test_parse_portlist_invalid_data() < 0)
return -1;
if (test_parse_portlist_invalid_param() < 0)
return -1;
- printf("Testind parsing numbers...\n");
+ printf("Testing parsing numbers...\n");
if (test_parse_num_valid() < 0)
return -1;
if (test_parse_num_invalid_data() < 0)
--
2.17.1
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 01/12] mk: introduce s390x architecture
2019-04-09 19:06 ` [dpdk-dev] [RFC 01/12] mk: " Vivian Kong
2019-04-09 19:06 ` Vivian Kong
@ 2019-04-09 19:38 ` Luca Boccassi
2019-04-09 19:38 ` Luca Boccassi
2019-04-10 16:50 ` Vivian Kong
1 sibling, 2 replies; 80+ messages in thread
From: Luca Boccassi @ 2019-04-09 19:38 UTC (permalink / raw)
To: vivkong, dev
On Tue, 2019-04-09 at 15:06 -0400, Vivian Kong wrote:
> Add config and mk files to build DPDK on Linux on IBM Z (s390x).
>
> Signed-off-by: Vivian Kong <
> vivkong@ca.ibm.com
> >
> ---
> config/defconfig_s390x-native-linux-gcc | 1 +
> config/defconfig_s390x-native-linuxapp-gcc | 33
> ++++++++++++++++++++++
> mk/arch/s390x/rte.vars.mk | 16 +++++++++++
> mk/rte.cpuflags.mk | 5 ++++
> 4 files changed, 55 insertions(+)
> create mode 120000 config/defconfig_s390x-native-linux-gcc
> create mode 100644 config/defconfig_s390x-native-linuxapp-gcc
> create mode 100644 mk/arch/s390x/rte.vars.mk
Hi,
Please look into adding support for Meson as well. Thanks!
--
Kind regards,
Luca Boccassi
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 01/12] mk: introduce s390x architecture
2019-04-09 19:38 ` Luca Boccassi
@ 2019-04-09 19:38 ` Luca Boccassi
2019-04-10 16:50 ` Vivian Kong
1 sibling, 0 replies; 80+ messages in thread
From: Luca Boccassi @ 2019-04-09 19:38 UTC (permalink / raw)
To: vivkong, dev
On Tue, 2019-04-09 at 15:06 -0400, Vivian Kong wrote:
> Add config and mk files to build DPDK on Linux on IBM Z (s390x).
>
> Signed-off-by: Vivian Kong <
> vivkong@ca.ibm.com
> >
> ---
> config/defconfig_s390x-native-linux-gcc | 1 +
> config/defconfig_s390x-native-linuxapp-gcc | 33
> ++++++++++++++++++++++
> mk/arch/s390x/rte.vars.mk | 16 +++++++++++
> mk/rte.cpuflags.mk | 5 ++++
> 4 files changed, 55 insertions(+)
> create mode 120000 config/defconfig_s390x-native-linux-gcc
> create mode 100644 config/defconfig_s390x-native-linuxapp-gcc
> create mode 100644 mk/arch/s390x/rte.vars.mk
Hi,
Please look into adding support for Meson as well. Thanks!
--
Kind regards,
Luca Boccassi
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 09/12] doc: introduce s390x architecture
2019-04-09 19:06 ` [dpdk-dev] [RFC 09/12] doc: introduce " Vivian Kong
2019-04-09 19:06 ` Vivian Kong
@ 2019-04-09 20:12 ` Thomas Monjalon
2019-04-09 20:12 ` Thomas Monjalon
2019-04-10 16:52 ` Vivian Kong
1 sibling, 2 replies; 80+ messages in thread
From: Thomas Monjalon @ 2019-04-09 20:12 UTC (permalink / raw)
To: vivkong; +Cc: dev
09/04/2019 21:06, Vivian Kong:
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> +Linux on IBM Z (s390x)
What is specific to Linux?
If it's supported only with Linux, better to say it in the doc
than in the MAINTAINERS file.
> +M: Vivian Kong <vivkong@ca.ibm.com.com>
Your email above is wrong.
> --- a/doc/guides/rel_notes/release_19_05.rst
> +++ b/doc/guides/rel_notes/release_19_05.rst
> +* **Added support for Linux on IBM Z (s390x).**
> +
> + Added initial support for Linux on IBM Z (s390x).
No way we add it in 19.05 while we are in release candidate phase.
I will discuss more about it in the reply to the cover letter.
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 09/12] doc: introduce s390x architecture
2019-04-09 20:12 ` Thomas Monjalon
@ 2019-04-09 20:12 ` Thomas Monjalon
2019-04-10 16:52 ` Vivian Kong
1 sibling, 0 replies; 80+ messages in thread
From: Thomas Monjalon @ 2019-04-09 20:12 UTC (permalink / raw)
To: vivkong; +Cc: dev
09/04/2019 21:06, Vivian Kong:
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> +Linux on IBM Z (s390x)
What is specific to Linux?
If it's supported only with Linux, better to say it in the doc
than in the MAINTAINERS file.
> +M: Vivian Kong <vivkong@ca.ibm.com.com>
Your email above is wrong.
> --- a/doc/guides/rel_notes/release_19_05.rst
> +++ b/doc/guides/rel_notes/release_19_05.rst
> +* **Added support for Linux on IBM Z (s390x).**
> +
> + Added initial support for Linux on IBM Z (s390x).
No way we add it in 19.05 while we are in release candidate phase.
I will discuss more about it in the reply to the cover letter.
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 11/12] mbuf: trivial fix
2019-04-09 19:06 ` [dpdk-dev] [RFC 11/12] mbuf: trivial fix Vivian Kong
2019-04-09 19:06 ` Vivian Kong
@ 2019-04-09 20:13 ` Thomas Monjalon
2019-04-09 20:13 ` Thomas Monjalon
1 sibling, 1 reply; 80+ messages in thread
From: Thomas Monjalon @ 2019-04-09 20:13 UTC (permalink / raw)
To: vivkong; +Cc: dev
09/04/2019 21:06, Vivian Kong:
> --- a/lib/librte_mbuf/rte_mbuf.h
> +++ b/lib/librte_mbuf/rte_mbuf.h
> @@ -500,7 +500,7 @@ enum {
> RTE_MBUF_OUTL2_LEN_BITS,
> #if RTE_BYTE_ORDER == RTE_BIG_ENDIAN
> RTE_MBUF_L2_LEN_OFS =
> - sizeof(uint64_t) * CHAR_BIT - RTE_MBUF_L2_LEN_BITS
> + sizeof(uint64_t) * CHAR_BIT - RTE_MBUF_L2_LEN_BITS,
That's funny because I was fixing it at the same time:
https://patches.dpdk.org/patch/52515/
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 11/12] mbuf: trivial fix
2019-04-09 20:13 ` Thomas Monjalon
@ 2019-04-09 20:13 ` Thomas Monjalon
0 siblings, 0 replies; 80+ messages in thread
From: Thomas Monjalon @ 2019-04-09 20:13 UTC (permalink / raw)
To: vivkong; +Cc: dev
09/04/2019 21:06, Vivian Kong:
> --- a/lib/librte_mbuf/rte_mbuf.h
> +++ b/lib/librte_mbuf/rte_mbuf.h
> @@ -500,7 +500,7 @@ enum {
> RTE_MBUF_OUTL2_LEN_BITS,
> #if RTE_BYTE_ORDER == RTE_BIG_ENDIAN
> RTE_MBUF_L2_LEN_OFS =
> - sizeof(uint64_t) * CHAR_BIT - RTE_MBUF_L2_LEN_BITS
> + sizeof(uint64_t) * CHAR_BIT - RTE_MBUF_L2_LEN_BITS,
That's funny because I was fixing it at the same time:
https://patches.dpdk.org/patch/52515/
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 10/12] ethdev: add cast for bus_device
2019-04-09 19:06 ` [dpdk-dev] [RFC 10/12] ethdev: add cast for bus_device Vivian Kong
2019-04-09 19:06 ` Vivian Kong
@ 2019-04-09 20:14 ` Thomas Monjalon
2019-04-09 20:14 ` Thomas Monjalon
` (2 more replies)
1 sibling, 3 replies; 80+ messages in thread
From: Thomas Monjalon @ 2019-04-09 20:14 UTC (permalink / raw)
To: vivkong; +Cc: dev
09/04/2019 21:06, Vivian Kong:
> Signed-off-by: Vivian Kong <vivkong@ca.ibm.com>
> ---
> static inline int
> eth_dev_pci_specific_init(struct rte_eth_dev *eth_dev, void *bus_device) {
> - struct rte_pci_device *pci_dev = bus_device;
> + struct rte_pci_device *pci_dev = (struct rte_pci_device *) bus_device;
Why do we need such cast?
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 10/12] ethdev: add cast for bus_device
2019-04-09 20:14 ` Thomas Monjalon
@ 2019-04-09 20:14 ` Thomas Monjalon
2019-04-10 2:41 ` Stephen Hemminger
2019-04-10 17:10 ` Vivian Kong
2 siblings, 0 replies; 80+ messages in thread
From: Thomas Monjalon @ 2019-04-09 20:14 UTC (permalink / raw)
To: vivkong; +Cc: dev
09/04/2019 21:06, Vivian Kong:
> Signed-off-by: Vivian Kong <vivkong@ca.ibm.com>
> ---
> static inline int
> eth_dev_pci_specific_init(struct rte_eth_dev *eth_dev, void *bus_device) {
> - struct rte_pci_device *pci_dev = bus_device;
> + struct rte_pci_device *pci_dev = (struct rte_pci_device *) bus_device;
Why do we need such cast?
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
2019-04-09 19:06 [dpdk-dev] [RFC 00/12] introduce s390x architecture Vivian Kong
` (12 preceding siblings ...)
2019-04-09 19:06 ` [dpdk-dev] [RFC 12/12] test: miscellaneous test fixes Vivian Kong
@ 2019-04-09 20:25 ` Thomas Monjalon
2019-04-09 20:25 ` Thomas Monjalon
2019-04-10 17:09 ` Vivian Kong
2019-04-11 7:45 ` David Marchand
2020-02-18 21:03 ` Thomas Monjalon
15 siblings, 2 replies; 80+ messages in thread
From: Thomas Monjalon @ 2019-04-09 20:25 UTC (permalink / raw)
To: vivkong; +Cc: dev
09/04/2019 21:06, Vivian Kong:
> To build and run DPDK on Linux on IBM Z (s390x), big endian support
> is added and s390x vector intrinics are used in the implementation
> of DPDK libraries.
>
> I appreciate your feedback.
I understand you worked on it during some time and you reveal it just now.
I must say thank you for the work.
It would have been better to notify the community in advance so we would
have discussed about the need for this work before you start.
First question: What is the use case of DPDK on s390x?
Second question: How is it tested? Do you have any CI?
Third question: Do you have time to dedicate to DPDK?
If yes, why not helping with IBM Power?
The reason for this last question is that the support for IBM Power
is still beta. I feel unconfortable merging one more IBM arch while
the first one does not receive enough support and testing.
I think running a CI for IBM Power would be a good first step.
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
2019-04-09 20:25 ` [dpdk-dev] [RFC 00/12] introduce s390x architecture Thomas Monjalon
@ 2019-04-09 20:25 ` Thomas Monjalon
2019-04-10 17:09 ` Vivian Kong
1 sibling, 0 replies; 80+ messages in thread
From: Thomas Monjalon @ 2019-04-09 20:25 UTC (permalink / raw)
To: vivkong; +Cc: dev
09/04/2019 21:06, Vivian Kong:
> To build and run DPDK on Linux on IBM Z (s390x), big endian support
> is added and s390x vector intrinics are used in the implementation
> of DPDK libraries.
>
> I appreciate your feedback.
I understand you worked on it during some time and you reveal it just now.
I must say thank you for the work.
It would have been better to notify the community in advance so we would
have discussed about the need for this work before you start.
First question: What is the use case of DPDK on s390x?
Second question: How is it tested? Do you have any CI?
Third question: Do you have time to dedicate to DPDK?
If yes, why not helping with IBM Power?
The reason for this last question is that the support for IBM Power
is still beta. I feel unconfortable merging one more IBM arch while
the first one does not receive enough support and testing.
I think running a CI for IBM Power would be a good first step.
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 10/12] ethdev: add cast for bus_device
2019-04-09 20:14 ` Thomas Monjalon
2019-04-09 20:14 ` Thomas Monjalon
@ 2019-04-10 2:41 ` Stephen Hemminger
2019-04-10 2:41 ` Stephen Hemminger
2019-04-10 17:10 ` Vivian Kong
2 siblings, 1 reply; 80+ messages in thread
From: Stephen Hemminger @ 2019-04-10 2:41 UTC (permalink / raw)
To: Thomas Monjalon; +Cc: vivkong, dev
On Tue, 09 Apr 2019 22:14:08 +0200
Thomas Monjalon <thomas@monjalon.net> wrote:
> 09/04/2019 21:06, Vivian Kong:
> > Signed-off-by: Vivian Kong <vivkong@ca.ibm.com>
> > ---
> > static inline int
> > eth_dev_pci_specific_init(struct rte_eth_dev *eth_dev, void *bus_device) {
> > - struct rte_pci_device *pci_dev = bus_device;
> > + struct rte_pci_device *pci_dev = (struct rte_pci_device *) bus_device;
>
> Why do we need such cast?
>
>
I agree with Thomas, we try to avoid extra casts and there is even
a script to find them.
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 10/12] ethdev: add cast for bus_device
2019-04-10 2:41 ` Stephen Hemminger
@ 2019-04-10 2:41 ` Stephen Hemminger
0 siblings, 0 replies; 80+ messages in thread
From: Stephen Hemminger @ 2019-04-10 2:41 UTC (permalink / raw)
To: Thomas Monjalon; +Cc: vivkong, dev
On Tue, 09 Apr 2019 22:14:08 +0200
Thomas Monjalon <thomas@monjalon.net> wrote:
> 09/04/2019 21:06, Vivian Kong:
> > Signed-off-by: Vivian Kong <vivkong@ca.ibm.com>
> > ---
> > static inline int
> > eth_dev_pci_specific_init(struct rte_eth_dev *eth_dev, void *bus_device) {
> > - struct rte_pci_device *pci_dev = bus_device;
> > + struct rte_pci_device *pci_dev = (struct rte_pci_device *) bus_device;
>
> Why do we need such cast?
>
>
I agree with Thomas, we try to avoid extra casts and there is even
a script to find them.
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 01/12] mk: introduce s390x architecture
2019-04-09 19:38 ` Luca Boccassi
2019-04-09 19:38 ` Luca Boccassi
@ 2019-04-10 16:50 ` Vivian Kong
2019-04-10 16:50 ` Vivian Kong
1 sibling, 1 reply; 80+ messages in thread
From: Vivian Kong @ 2019-04-10 16:50 UTC (permalink / raw)
To: Luca Boccassi; +Cc: dev
I'll look into adding that. Thanks.
Regards,
Vivian Kong
Linux on IBM Z Open Source Ecosystem
IBM Canada Toronto Lab
Luca Boccassi <bluca@debian.org> wrote on 2019/04/09 03:38:45 PM:
> From: Luca Boccassi <bluca@debian.org>
> To: vivkong@ca.ibm.com, dev@dpdk.org
> Date: 2019/04/09 03:38 PM
> Subject: Re: [dpdk-dev] [RFC 01/12] mk: introduce s390x architecture
>
> On Tue, 2019-04-09 at 15:06 -0400, Vivian Kong wrote:
> > Add config and mk files to build DPDK on Linux on IBM Z (s390x).
> >
> > Signed-off-by: Vivian Kong <
> > vivkong@ca.ibm.com
> > >
> > ---
> > config/defconfig_s390x-native-linux-gcc | 1 +
> > config/defconfig_s390x-native-linuxapp-gcc | 33
> > ++++++++++++++++++++++
> > mk/arch/s390x/rte.vars.mk | 16 +++++++++++
> > mk/rte.cpuflags.mk | 5 ++++
> > 4 files changed, 55 insertions(+)
> > create mode 120000 config/defconfig_s390x-native-linux-gcc
> > create mode 100644 config/defconfig_s390x-native-linuxapp-gcc
> > create mode 100644 mk/arch/s390x/rte.vars.mk
>
> Hi,
>
> Please look into adding support for Meson as well. Thanks!
>
> --
> Kind regards,
> Luca Boccassi
>
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 01/12] mk: introduce s390x architecture
2019-04-10 16:50 ` Vivian Kong
@ 2019-04-10 16:50 ` Vivian Kong
0 siblings, 0 replies; 80+ messages in thread
From: Vivian Kong @ 2019-04-10 16:50 UTC (permalink / raw)
To: Luca Boccassi; +Cc: dev
I'll look into adding that. Thanks.
Regards,
Vivian Kong
Linux on IBM Z Open Source Ecosystem
IBM Canada Toronto Lab
Luca Boccassi <bluca@debian.org> wrote on 2019/04/09 03:38:45 PM:
> From: Luca Boccassi <bluca@debian.org>
> To: vivkong@ca.ibm.com, dev@dpdk.org
> Date: 2019/04/09 03:38 PM
> Subject: Re: [dpdk-dev] [RFC 01/12] mk: introduce s390x architecture
>
> On Tue, 2019-04-09 at 15:06 -0400, Vivian Kong wrote:
> > Add config and mk files to build DPDK on Linux on IBM Z (s390x).
> >
> > Signed-off-by: Vivian Kong <
> > vivkong@ca.ibm.com
> > >
> > ---
> > config/defconfig_s390x-native-linux-gcc | 1 +
> > config/defconfig_s390x-native-linuxapp-gcc | 33
> > ++++++++++++++++++++++
> > mk/arch/s390x/rte.vars.mk | 16 +++++++++++
> > mk/rte.cpuflags.mk | 5 ++++
> > 4 files changed, 55 insertions(+)
> > create mode 120000 config/defconfig_s390x-native-linux-gcc
> > create mode 100644 config/defconfig_s390x-native-linuxapp-gcc
> > create mode 100644 mk/arch/s390x/rte.vars.mk
>
> Hi,
>
> Please look into adding support for Meson as well. Thanks!
>
> --
> Kind regards,
> Luca Boccassi
>
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 09/12] doc: introduce s390x architecture
2019-04-09 20:12 ` Thomas Monjalon
2019-04-09 20:12 ` Thomas Monjalon
@ 2019-04-10 16:52 ` Vivian Kong
2019-04-10 16:52 ` Vivian Kong
1 sibling, 1 reply; 80+ messages in thread
From: Vivian Kong @ 2019-04-10 16:52 UTC (permalink / raw)
To: Thomas Monjalon; +Cc: dev
Hi Thomas,
I haven't figured out how to send out patches via Notes so I sent them via
Gmail server. I set up "git send-email" to send as my IBM email but Gmail
changed that when the patches get sent out. I have to see if there are
another server I can use to send patches.
Right I don't expect these to go in 19.05. I wanted to follow the
contribution doc and update documentation.
Regards,
Vivian Kong
Linux on IBM Z Open Source Ecosystem
IBM Canada Toronto Lab
Thomas Monjalon <thomas@monjalon.net> wrote on 2019/04/09 04:12:01 PM:
> From: Thomas Monjalon <thomas@monjalon.net>
> To: vivkong@ca.ibm.com
> Cc: dev@dpdk.org
> Date: 2019/04/09 04:12 PM
> Subject: Re: [dpdk-dev] [RFC 09/12] doc: introduce s390x architecture
>
> 09/04/2019 21:06, Vivian Kong:
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > +Linux on IBM Z (s390x)
>
> What is specific to Linux?
> If it's supported only with Linux, better to say it in the doc
> than in the MAINTAINERS file.
>
> > +M: Vivian Kong <vivkong@ca.ibm.com.com>
>
> Your email above is wrong.
>
>
> > --- a/doc/guides/rel_notes/release_19_05.rst
> > +++ b/doc/guides/rel_notes/release_19_05.rst
> > +* **Added support for Linux on IBM Z (s390x).**
> > +
> > + Added initial support for Linux on IBM Z (s390x).
>
> No way we add it in 19.05 while we are in release candidate phase.
> I will discuss more about it in the reply to the cover letter.
>
>
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 09/12] doc: introduce s390x architecture
2019-04-10 16:52 ` Vivian Kong
@ 2019-04-10 16:52 ` Vivian Kong
0 siblings, 0 replies; 80+ messages in thread
From: Vivian Kong @ 2019-04-10 16:52 UTC (permalink / raw)
To: Thomas Monjalon; +Cc: dev
Hi Thomas,
I haven't figured out how to send out patches via Notes so I sent them via
Gmail server. I set up "git send-email" to send as my IBM email but Gmail
changed that when the patches get sent out. I have to see if there are
another server I can use to send patches.
Right I don't expect these to go in 19.05. I wanted to follow the
contribution doc and update documentation.
Regards,
Vivian Kong
Linux on IBM Z Open Source Ecosystem
IBM Canada Toronto Lab
Thomas Monjalon <thomas@monjalon.net> wrote on 2019/04/09 04:12:01 PM:
> From: Thomas Monjalon <thomas@monjalon.net>
> To: vivkong@ca.ibm.com
> Cc: dev@dpdk.org
> Date: 2019/04/09 04:12 PM
> Subject: Re: [dpdk-dev] [RFC 09/12] doc: introduce s390x architecture
>
> 09/04/2019 21:06, Vivian Kong:
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > +Linux on IBM Z (s390x)
>
> What is specific to Linux?
> If it's supported only with Linux, better to say it in the doc
> than in the MAINTAINERS file.
>
> > +M: Vivian Kong <vivkong@ca.ibm.com.com>
>
> Your email above is wrong.
>
>
> > --- a/doc/guides/rel_notes/release_19_05.rst
> > +++ b/doc/guides/rel_notes/release_19_05.rst
> > +* **Added support for Linux on IBM Z (s390x).**
> > +
> > + Added initial support for Linux on IBM Z (s390x).
>
> No way we add it in 19.05 while we are in release candidate phase.
> I will discuss more about it in the reply to the cover letter.
>
>
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
2019-04-09 20:25 ` [dpdk-dev] [RFC 00/12] introduce s390x architecture Thomas Monjalon
2019-04-09 20:25 ` Thomas Monjalon
@ 2019-04-10 17:09 ` Vivian Kong
2019-04-10 17:09 ` Vivian Kong
2019-04-10 17:43 ` Thomas Monjalon
1 sibling, 2 replies; 80+ messages in thread
From: Vivian Kong @ 2019-04-10 17:09 UTC (permalink / raw)
To: Thomas Monjalon; +Cc: dev
Hi Thomas,
Thanks for your comments. Please see my answers to your questions below.
> First question: What is the use case of DPDK on s390x?
IBM would like to use DPDK in our new IBM cloud offering on Z.
> Second question: How is it tested? Do you have any CI?
We ran the tests by "make tests". We don't have CI set up at the moment
but this is definitely something we are looking into adding.
> Third question: Do you have time to dedicate to DPDK?
After this initial port, we do plan to keep currency base on need but how
frequent will be determined by usage.
> If yes, why not helping with IBM Power?
Our work is specific to Z offering, we'll be interested to run CI for Z
also which will help maintaining our currency.
How is CI set up on the platforms currently supported in DPDK? It looks
like a build gets run after a patch is submitted. Wondering if there are
any documentation on how this is set up?
Thanks.
Regards,
Vivian Kong
Linux on IBM Z Open Source Ecosystem
IBM Canada Toronto Lab
Thomas Monjalon <thomas@monjalon.net> wrote on 2019/04/09 04:25:30 PM:
> From: Thomas Monjalon <thomas@monjalon.net>
> To: vivkong@ca.ibm.com
> Cc: dev@dpdk.org
> Date: 2019/04/09 04:25 PM
> Subject: Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
>
> 09/04/2019 21:06, Vivian Kong:
> > To build and run DPDK on Linux on IBM Z (s390x), big endian support
> > is added and s390x vector intrinics are used in the implementation
> > of DPDK libraries.
> >
> > I appreciate your feedback.
>
> I understand you worked on it during some time and you reveal it just
now.
> I must say thank you for the work.
> It would have been better to notify the community in advance so we would
> have discussed about the need for this work before you start.
>
> First question: What is the use case of DPDK on s390x?
>
> Second question: How is it tested? Do you have any CI?
>
> Third question: Do you have time to dedicate to DPDK?
> If yes, why not helping with IBM Power?
>
> The reason for this last question is that the support for IBM Power
> is still beta. I feel unconfortable merging one more IBM arch while
> the first one does not receive enough support and testing.
> I think running a CI for IBM Power would be a good first step.
>
>
>
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
2019-04-10 17:09 ` Vivian Kong
@ 2019-04-10 17:09 ` Vivian Kong
2019-04-10 17:43 ` Thomas Monjalon
1 sibling, 0 replies; 80+ messages in thread
From: Vivian Kong @ 2019-04-10 17:09 UTC (permalink / raw)
To: Thomas Monjalon; +Cc: dev
Hi Thomas,
Thanks for your comments. Please see my answers to your questions below.
> First question: What is the use case of DPDK on s390x?
IBM would like to use DPDK in our new IBM cloud offering on Z.
> Second question: How is it tested? Do you have any CI?
We ran the tests by "make tests". We don't have CI set up at the moment
but this is definitely something we are looking into adding.
> Third question: Do you have time to dedicate to DPDK?
After this initial port, we do plan to keep currency base on need but how
frequent will be determined by usage.
> If yes, why not helping with IBM Power?
Our work is specific to Z offering, we'll be interested to run CI for Z
also which will help maintaining our currency.
How is CI set up on the platforms currently supported in DPDK? It looks
like a build gets run after a patch is submitted. Wondering if there are
any documentation on how this is set up?
Thanks.
Regards,
Vivian Kong
Linux on IBM Z Open Source Ecosystem
IBM Canada Toronto Lab
Thomas Monjalon <thomas@monjalon.net> wrote on 2019/04/09 04:25:30 PM:
> From: Thomas Monjalon <thomas@monjalon.net>
> To: vivkong@ca.ibm.com
> Cc: dev@dpdk.org
> Date: 2019/04/09 04:25 PM
> Subject: Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
>
> 09/04/2019 21:06, Vivian Kong:
> > To build and run DPDK on Linux on IBM Z (s390x), big endian support
> > is added and s390x vector intrinics are used in the implementation
> > of DPDK libraries.
> >
> > I appreciate your feedback.
>
> I understand you worked on it during some time and you reveal it just
now.
> I must say thank you for the work.
> It would have been better to notify the community in advance so we would
> have discussed about the need for this work before you start.
>
> First question: What is the use case of DPDK on s390x?
>
> Second question: How is it tested? Do you have any CI?
>
> Third question: Do you have time to dedicate to DPDK?
> If yes, why not helping with IBM Power?
>
> The reason for this last question is that the support for IBM Power
> is still beta. I feel unconfortable merging one more IBM arch while
> the first one does not receive enough support and testing.
> I think running a CI for IBM Power would be a good first step.
>
>
>
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 10/12] ethdev: add cast for bus_device
2019-04-09 20:14 ` Thomas Monjalon
2019-04-09 20:14 ` Thomas Monjalon
2019-04-10 2:41 ` Stephen Hemminger
@ 2019-04-10 17:10 ` Vivian Kong
2019-04-10 17:10 ` Vivian Kong
2 siblings, 1 reply; 80+ messages in thread
From: Vivian Kong @ 2019-04-10 17:10 UTC (permalink / raw)
To: Thomas Monjalon; +Cc: dev
Hmm...we weren't able to compile without the cast. I'll take a closer
look. Thanks.
Regards,
Vivian Kong
Linux on IBM Z Open Source Ecosystem
IBM Canada Toronto Lab
Thomas Monjalon <thomas@monjalon.net> wrote on 2019/04/09 04:14:08 PM:
> From: Thomas Monjalon <thomas@monjalon.net>
> To: vivkong@ca.ibm.com
> Cc: dev@dpdk.org
> Date: 2019/04/09 04:14 PM
> Subject: Re: [dpdk-dev] [RFC 10/12] ethdev: add cast for bus_device
>
> 09/04/2019 21:06, Vivian Kong:
> > Signed-off-by: Vivian Kong <vivkong@ca.ibm.com>
> > ---
> > static inline int
> > eth_dev_pci_specific_init(struct rte_eth_dev *eth_dev, void
*bus_device) {
> > - struct rte_pci_device *pci_dev = bus_device;
> > + struct rte_pci_device *pci_dev = (struct rte_pci_device *)
bus_device;
>
> Why do we need such cast?
>
>
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 10/12] ethdev: add cast for bus_device
2019-04-10 17:10 ` Vivian Kong
@ 2019-04-10 17:10 ` Vivian Kong
0 siblings, 0 replies; 80+ messages in thread
From: Vivian Kong @ 2019-04-10 17:10 UTC (permalink / raw)
To: Thomas Monjalon; +Cc: dev
Hmm...we weren't able to compile without the cast. I'll take a closer
look. Thanks.
Regards,
Vivian Kong
Linux on IBM Z Open Source Ecosystem
IBM Canada Toronto Lab
Thomas Monjalon <thomas@monjalon.net> wrote on 2019/04/09 04:14:08 PM:
> From: Thomas Monjalon <thomas@monjalon.net>
> To: vivkong@ca.ibm.com
> Cc: dev@dpdk.org
> Date: 2019/04/09 04:14 PM
> Subject: Re: [dpdk-dev] [RFC 10/12] ethdev: add cast for bus_device
>
> 09/04/2019 21:06, Vivian Kong:
> > Signed-off-by: Vivian Kong <vivkong@ca.ibm.com>
> > ---
> > static inline int
> > eth_dev_pci_specific_init(struct rte_eth_dev *eth_dev, void
*bus_device) {
> > - struct rte_pci_device *pci_dev = bus_device;
> > + struct rte_pci_device *pci_dev = (struct rte_pci_device *)
bus_device;
>
> Why do we need such cast?
>
>
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
2019-04-10 17:09 ` Vivian Kong
2019-04-10 17:09 ` Vivian Kong
@ 2019-04-10 17:43 ` Thomas Monjalon
2019-04-10 17:43 ` Thomas Monjalon
` (2 more replies)
1 sibling, 3 replies; 80+ messages in thread
From: Thomas Monjalon @ 2019-04-10 17:43 UTC (permalink / raw)
To: Vivian Kong; +Cc: dev
10/04/2019 19:09, Vivian Kong:
> Hi Thomas,
>
> Thanks for your comments. Please see my answers to your questions below.
>
> > First question: What is the use case of DPDK on s390x?
>
> IBM would like to use DPDK in our new IBM cloud offering on Z.
>
>
>
> > Second question: How is it tested? Do you have any CI?
>
> We ran the tests by "make tests". We don't have CI set up at the moment
> but this is definitely something we are looking into adding.
>
>
>
> > Third question: Do you have time to dedicate to DPDK?
>
> After this initial port, we do plan to keep currency base on need but how
> frequent will be determined by usage.
>
>
>
> > If yes, why not helping with IBM Power?
>
> Our work is specific to Z offering, we'll be interested to run CI for Z
> also which will help maintaining our currency.
>
> How is CI set up on the platforms currently supported in DPDK? It looks
> like a build gets run after a patch is submitted. Wondering if there are
> any documentation on how this is set up?
There is no complete documentation, but we should build one.
That would be great if you could help while riding this path.
Some starting points:
https://patches.dpdk.org
http://git.dpdk.org/tools/dpdk-ci/
http://mails.dpdk.org/listinfo/ci
Please help with IBM Power CI at the same time.
I would like to see some progress on this front
before integrating a new IBM CPU.
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
2019-04-10 17:43 ` Thomas Monjalon
@ 2019-04-10 17:43 ` Thomas Monjalon
2019-04-10 19:15 ` Vivian Kong
2019-04-10 20:31 ` David Christensen
2 siblings, 0 replies; 80+ messages in thread
From: Thomas Monjalon @ 2019-04-10 17:43 UTC (permalink / raw)
To: Vivian Kong; +Cc: dev
10/04/2019 19:09, Vivian Kong:
> Hi Thomas,
>
> Thanks for your comments. Please see my answers to your questions below.
>
> > First question: What is the use case of DPDK on s390x?
>
> IBM would like to use DPDK in our new IBM cloud offering on Z.
>
>
>
> > Second question: How is it tested? Do you have any CI?
>
> We ran the tests by "make tests". We don't have CI set up at the moment
> but this is definitely something we are looking into adding.
>
>
>
> > Third question: Do you have time to dedicate to DPDK?
>
> After this initial port, we do plan to keep currency base on need but how
> frequent will be determined by usage.
>
>
>
> > If yes, why not helping with IBM Power?
>
> Our work is specific to Z offering, we'll be interested to run CI for Z
> also which will help maintaining our currency.
>
> How is CI set up on the platforms currently supported in DPDK? It looks
> like a build gets run after a patch is submitted. Wondering if there are
> any documentation on how this is set up?
There is no complete documentation, but we should build one.
That would be great if you could help while riding this path.
Some starting points:
https://patches.dpdk.org
http://git.dpdk.org/tools/dpdk-ci/
http://mails.dpdk.org/listinfo/ci
Please help with IBM Power CI at the same time.
I would like to see some progress on this front
before integrating a new IBM CPU.
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
2019-04-10 17:43 ` Thomas Monjalon
2019-04-10 17:43 ` Thomas Monjalon
@ 2019-04-10 19:15 ` Vivian Kong
2019-04-10 19:15 ` Vivian Kong
2019-04-10 19:46 ` Thomas Monjalon
2019-04-10 20:31 ` David Christensen
2 siblings, 2 replies; 80+ messages in thread
From: Vivian Kong @ 2019-04-10 19:15 UTC (permalink / raw)
To: Thomas Monjalon; +Cc: dev
Thanks for the links! I'll go through them.
For Power CI, not sure how we can help as it is done by another team. If s390x is added, we plan on maintaining currency and setting up CI on
s390x will help do that.
Regards,
Vivian Kong
Linux on IBM Z Open Source Ecosystem
IBM Canada Toronto Lab
Thomas Monjalon <thomas@monjalon.net> wrote on 2019/04/10 01:43:34 PM:
> From: Thomas Monjalon <thomas@monjalon.net>
> To: Vivian Kong <vivkong@ca.ibm.com>
> Cc: dev@dpdk.org
> Date: 2019/04/10 01:43 PM
> Subject: Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
>
> 10/04/2019 19:09, Vivian Kong:
> > Hi Thomas,
> >
> > Thanks for your comments. Please see my answers to your questions
below.
> >
> > > First question: What is the use case of DPDK on s390x?
> >
> > IBM would like to use DPDK in our new IBM cloud offering on Z.
> >
> >
> >
> > > Second question: How is it tested? Do you have any CI?
> >
> > We ran the tests by "make tests". We don't have CI set up at the
moment
> > but this is definitely something we are looking into adding.
> >
> >
> >
> > > Third question: Do you have time to dedicate to DPDK?
> >
> > After this initial port, we do plan to keep currency base on need but
how
> > frequent will be determined by usage.
> >
> >
> >
> > > If yes, why not helping with IBM Power?
> >
> > Our work is specific to Z offering, we'll be interested to run CI for Z
> > also which will help maintaining our currency.
> >
> > How is CI set up on the platforms currently supported in DPDK? It
looks
> > like a build gets run after a patch is submitted. Wondering if there
are
> > any documentation on how this is set up?
>
> There is no complete documentation, but we should build one.
> That would be great if you could help while riding this path.
>
> Some starting points:
> https://urldefense.proofpoint.com/v2/url?
> u=https-3A__patches.dpdk.org&d=DwICAg&c=jf_iaSHvJObTbx-
>
siA1ZOg&r=t7gXFFEkLvveGPwCXa29Q41okXMOY7sJK43BPFcHaRY&m=VchTLEmGgUOXsp5m5hZPa8aCYMnWpA3V_TmZGGW995I&s=Y9d-
> qW-nAewmuq-Op0l7kKOtq7hzIC3Wm-qcdkqQO8E&e=
> https://urldefense.proofpoint.com/v2/url?
> u=http-3A__git.dpdk.org_tools_dpdk-2Dci_&d=DwICAg&c=jf_iaSHvJObTbx-
>
siA1ZOg&r=t7gXFFEkLvveGPwCXa29Q41okXMOY7sJK43BPFcHaRY&m=VchTLEmGgUOXsp5m5hZPa8aCYMnWpA3V_TmZGGW995I&s=cP_hEZmUedWHOcXUF-
> TTShw8UprsMFFrYhFyqp_mWHw&e=
> https://urldefense.proofpoint.com/v2/url?
> u=http-3A__mails.dpdk.org_listinfo_ci&d=DwICAg&c=jf_iaSHvJObTbx-
>
siA1ZOg&r=t7gXFFEkLvveGPwCXa29Q41okXMOY7sJK43BPFcHaRY&m=VchTLEmGgUOXsp5m5hZPa8aCYMnWpA3V_TmZGGW995I&s=WWm6B32WFdHyVc3CAuMwfNsIZEDpPeAhy9MJRKnKXow&e=
>
> Please help with IBM Power CI at the same time.
> I would like to see some progress on this front
> before integrating a new IBM CPU.
>
>
>
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
2019-04-10 19:15 ` Vivian Kong
@ 2019-04-10 19:15 ` Vivian Kong
2019-04-10 19:46 ` Thomas Monjalon
1 sibling, 0 replies; 80+ messages in thread
From: Vivian Kong @ 2019-04-10 19:15 UTC (permalink / raw)
To: Thomas Monjalon; +Cc: dev
Thanks for the links! I'll go through them.
For Power CI, not sure how we can help as it is done by another team. If s390x is added, we plan on maintaining currency and setting up CI on
s390x will help do that.
Regards,
Vivian Kong
Linux on IBM Z Open Source Ecosystem
IBM Canada Toronto Lab
Thomas Monjalon <thomas@monjalon.net> wrote on 2019/04/10 01:43:34 PM:
> From: Thomas Monjalon <thomas@monjalon.net>
> To: Vivian Kong <vivkong@ca.ibm.com>
> Cc: dev@dpdk.org
> Date: 2019/04/10 01:43 PM
> Subject: Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
>
> 10/04/2019 19:09, Vivian Kong:
> > Hi Thomas,
> >
> > Thanks for your comments. Please see my answers to your questions
below.
> >
> > > First question: What is the use case of DPDK on s390x?
> >
> > IBM would like to use DPDK in our new IBM cloud offering on Z.
> >
> >
> >
> > > Second question: How is it tested? Do you have any CI?
> >
> > We ran the tests by "make tests". We don't have CI set up at the
moment
> > but this is definitely something we are looking into adding.
> >
> >
> >
> > > Third question: Do you have time to dedicate to DPDK?
> >
> > After this initial port, we do plan to keep currency base on need but
how
> > frequent will be determined by usage.
> >
> >
> >
> > > If yes, why not helping with IBM Power?
> >
> > Our work is specific to Z offering, we'll be interested to run CI for Z
> > also which will help maintaining our currency.
> >
> > How is CI set up on the platforms currently supported in DPDK? It
looks
> > like a build gets run after a patch is submitted. Wondering if there
are
> > any documentation on how this is set up?
>
> There is no complete documentation, but we should build one.
> That would be great if you could help while riding this path.
>
> Some starting points:
> https://urldefense.proofpoint.com/v2/url?
> u=https-3A__patches.dpdk.org&d=DwICAg&c=jf_iaSHvJObTbx-
>
siA1ZOg&r=t7gXFFEkLvveGPwCXa29Q41okXMOY7sJK43BPFcHaRY&m=VchTLEmGgUOXsp5m5hZPa8aCYMnWpA3V_TmZGGW995I&s=Y9d-
> qW-nAewmuq-Op0l7kKOtq7hzIC3Wm-qcdkqQO8E&e=
> https://urldefense.proofpoint.com/v2/url?
> u=http-3A__git.dpdk.org_tools_dpdk-2Dci_&d=DwICAg&c=jf_iaSHvJObTbx-
>
siA1ZOg&r=t7gXFFEkLvveGPwCXa29Q41okXMOY7sJK43BPFcHaRY&m=VchTLEmGgUOXsp5m5hZPa8aCYMnWpA3V_TmZGGW995I&s=cP_hEZmUedWHOcXUF-
> TTShw8UprsMFFrYhFyqp_mWHw&e=
> https://urldefense.proofpoint.com/v2/url?
> u=http-3A__mails.dpdk.org_listinfo_ci&d=DwICAg&c=jf_iaSHvJObTbx-
>
siA1ZOg&r=t7gXFFEkLvveGPwCXa29Q41okXMOY7sJK43BPFcHaRY&m=VchTLEmGgUOXsp5m5hZPa8aCYMnWpA3V_TmZGGW995I&s=WWm6B32WFdHyVc3CAuMwfNsIZEDpPeAhy9MJRKnKXow&e=
>
> Please help with IBM Power CI at the same time.
> I would like to see some progress on this front
> before integrating a new IBM CPU.
>
>
>
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
2019-04-10 19:15 ` Vivian Kong
2019-04-10 19:15 ` Vivian Kong
@ 2019-04-10 19:46 ` Thomas Monjalon
2019-04-10 19:46 ` Thomas Monjalon
2019-04-10 20:45 ` Vivian Kong
1 sibling, 2 replies; 80+ messages in thread
From: Thomas Monjalon @ 2019-04-10 19:46 UTC (permalink / raw)
To: Vivian Kong; +Cc: dev
10/04/2019 21:15, Vivian Kong:
> Thomas Monjalon <thomas@monjalon.net> wrote on 2019/04/10 01:43:34 PM:
> > Please help with IBM Power CI at the same time.
> > I would like to see some progress on this front
> > before integrating a new IBM CPU.
>
> For Power CI, not sure how we can help as it is done by another team.
> If s390x is added, we plan on maintaining currency and setting up CI on
> s390x will help do that.
You have the same objective as another team in your company,
so there is probably some room to collaborate.
You are probably in better position to help with CI on Power than
anyone else in the community.
I know it is a different team, but think about other contributors
who are not even in the same company.
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
2019-04-10 19:46 ` Thomas Monjalon
@ 2019-04-10 19:46 ` Thomas Monjalon
2019-04-10 20:45 ` Vivian Kong
1 sibling, 0 replies; 80+ messages in thread
From: Thomas Monjalon @ 2019-04-10 19:46 UTC (permalink / raw)
To: Vivian Kong; +Cc: dev
10/04/2019 21:15, Vivian Kong:
> Thomas Monjalon <thomas@monjalon.net> wrote on 2019/04/10 01:43:34 PM:
> > Please help with IBM Power CI at the same time.
> > I would like to see some progress on this front
> > before integrating a new IBM CPU.
>
> For Power CI, not sure how we can help as it is done by another team.
> If s390x is added, we plan on maintaining currency and setting up CI on
> s390x will help do that.
You have the same objective as another team in your company,
so there is probably some room to collaborate.
You are probably in better position to help with CI on Power than
anyone else in the community.
I know it is a different team, but think about other contributors
who are not even in the same company.
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
2019-04-10 17:43 ` Thomas Monjalon
2019-04-10 17:43 ` Thomas Monjalon
2019-04-10 19:15 ` Vivian Kong
@ 2019-04-10 20:31 ` David Christensen
2019-04-10 20:31 ` David Christensen
2019-04-10 20:46 ` Thomas Monjalon
2 siblings, 2 replies; 80+ messages in thread
From: David Christensen @ 2019-04-10 20:31 UTC (permalink / raw)
To: Thomas Monjalon, Vivian Kong; +Cc: dev, pradeep
>>> Second question: How is it tested? Do you have any CI?
>>
>> We ran the tests by "make tests". We don't have CI set up at the moment
>> but this is definitely something we are looking into adding.
>>
> Please help with IBM Power CI at the same time.
> I would like to see some progress on this front
> before integrating a new IBM CPU.
The IBM Power team is not idle in this area. There's ongoing work to
enable DTS on Power systems.
Dave
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
2019-04-10 20:31 ` David Christensen
@ 2019-04-10 20:31 ` David Christensen
2019-04-10 20:46 ` Thomas Monjalon
1 sibling, 0 replies; 80+ messages in thread
From: David Christensen @ 2019-04-10 20:31 UTC (permalink / raw)
To: Thomas Monjalon, Vivian Kong; +Cc: dev, pradeep
>>> Second question: How is it tested? Do you have any CI?
>>
>> We ran the tests by "make tests". We don't have CI set up at the moment
>> but this is definitely something we are looking into adding.
>>
> Please help with IBM Power CI at the same time.
> I would like to see some progress on this front
> before integrating a new IBM CPU.
The IBM Power team is not idle in this area. There's ongoing work to
enable DTS on Power systems.
Dave
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
2019-04-10 19:46 ` Thomas Monjalon
2019-04-10 19:46 ` Thomas Monjalon
@ 2019-04-10 20:45 ` Vivian Kong
2019-04-10 20:45 ` Vivian Kong
1 sibling, 1 reply; 80+ messages in thread
From: Vivian Kong @ 2019-04-10 20:45 UTC (permalink / raw)
To: Thomas Monjalon; +Cc: dev
Sorry what I meant to say is that we have no control over what Power team
will do in terms on CI. And yes I will definitely reach out to them to see
what their plans are.
Regards,
Vivian Kong
Linux on IBM Z Open Source Ecosystem
IBM Canada Toronto Lab
Thomas Monjalon <thomas@monjalon.net> wrote on 2019/04/10 03:46:12 PM:
> From: Thomas Monjalon <thomas@monjalon.net>
> To: Vivian Kong <vivkong@ca.ibm.com>
> Cc: dev@dpdk.org
> Date: 2019/04/10 03:46 PM
> Subject: Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
>
> 10/04/2019 21:15, Vivian Kong:
> > Thomas Monjalon <thomas@monjalon.net> wrote on 2019/04/10 01:43:34 PM:
> > > Please help with IBM Power CI at the same time.
> > > I would like to see some progress on this front
> > > before integrating a new IBM CPU.
> >
> > For Power CI, not sure how we can help as it is done by another team.
> > If s390x is added, we plan on maintaining currency and setting up CI
on
> > s390x will help do that.
>
> You have the same objective as another team in your company,
> so there is probably some room to collaborate.
> You are probably in better position to help with CI on Power than
> anyone else in the community.
> I know it is a different team, but think about other contributors
> who are not even in the same company.
>
>
>
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
2019-04-10 20:45 ` Vivian Kong
@ 2019-04-10 20:45 ` Vivian Kong
0 siblings, 0 replies; 80+ messages in thread
From: Vivian Kong @ 2019-04-10 20:45 UTC (permalink / raw)
To: Thomas Monjalon; +Cc: dev
Sorry what I meant to say is that we have no control over what Power team
will do in terms on CI. And yes I will definitely reach out to them to see
what their plans are.
Regards,
Vivian Kong
Linux on IBM Z Open Source Ecosystem
IBM Canada Toronto Lab
Thomas Monjalon <thomas@monjalon.net> wrote on 2019/04/10 03:46:12 PM:
> From: Thomas Monjalon <thomas@monjalon.net>
> To: Vivian Kong <vivkong@ca.ibm.com>
> Cc: dev@dpdk.org
> Date: 2019/04/10 03:46 PM
> Subject: Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
>
> 10/04/2019 21:15, Vivian Kong:
> > Thomas Monjalon <thomas@monjalon.net> wrote on 2019/04/10 01:43:34 PM:
> > > Please help with IBM Power CI at the same time.
> > > I would like to see some progress on this front
> > > before integrating a new IBM CPU.
> >
> > For Power CI, not sure how we can help as it is done by another team.
> > If s390x is added, we plan on maintaining currency and setting up CI
on
> > s390x will help do that.
>
> You have the same objective as another team in your company,
> so there is probably some room to collaborate.
> You are probably in better position to help with CI on Power than
> anyone else in the community.
> I know it is a different team, but think about other contributors
> who are not even in the same company.
>
>
>
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
2019-04-10 20:31 ` David Christensen
2019-04-10 20:31 ` David Christensen
@ 2019-04-10 20:46 ` Thomas Monjalon
2019-04-10 20:46 ` Thomas Monjalon
` (2 more replies)
1 sibling, 3 replies; 80+ messages in thread
From: Thomas Monjalon @ 2019-04-10 20:46 UTC (permalink / raw)
To: David Christensen; +Cc: Vivian Kong, dev, pradeep
10/04/2019 22:31, David Christensen:
> >>> Second question: How is it tested? Do you have any CI?
> >>
> >> We ran the tests by "make tests". We don't have CI set up at the moment
> >> but this is definitely something we are looking into adding.
> >>
> > Please help with IBM Power CI at the same time.
> > I would like to see some progress on this front
> > before integrating a new IBM CPU.
>
> The IBM Power team is not idle in this area. There's ongoing work to
> enable DTS on Power systems.
Good to read there is some work in the pipe.
I can remember the first emails (in 2015) talking about some automated
tests for compilation and unit tests on IBM Power.
We are still seeing some compilation issues regularly on Power.
Before going to DTS, I think you should extend your compilation testing,
and basic feature testing with builtin unit tests.
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
2019-04-10 20:46 ` Thomas Monjalon
@ 2019-04-10 20:46 ` Thomas Monjalon
2019-04-10 21:03 ` David Christensen
2019-04-10 21:45 ` Pradeep Satyanarayana
2 siblings, 0 replies; 80+ messages in thread
From: Thomas Monjalon @ 2019-04-10 20:46 UTC (permalink / raw)
To: David Christensen; +Cc: Vivian Kong, dev, pradeep
10/04/2019 22:31, David Christensen:
> >>> Second question: How is it tested? Do you have any CI?
> >>
> >> We ran the tests by "make tests". We don't have CI set up at the moment
> >> but this is definitely something we are looking into adding.
> >>
> > Please help with IBM Power CI at the same time.
> > I would like to see some progress on this front
> > before integrating a new IBM CPU.
>
> The IBM Power team is not idle in this area. There's ongoing work to
> enable DTS on Power systems.
Good to read there is some work in the pipe.
I can remember the first emails (in 2015) talking about some automated
tests for compilation and unit tests on IBM Power.
We are still seeing some compilation issues regularly on Power.
Before going to DTS, I think you should extend your compilation testing,
and basic feature testing with builtin unit tests.
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
2019-04-10 20:46 ` Thomas Monjalon
2019-04-10 20:46 ` Thomas Monjalon
@ 2019-04-10 21:03 ` David Christensen
2019-04-10 21:03 ` David Christensen
2019-04-10 21:45 ` Pradeep Satyanarayana
2 siblings, 1 reply; 80+ messages in thread
From: David Christensen @ 2019-04-10 21:03 UTC (permalink / raw)
To: Thomas Monjalon; +Cc: Vivian Kong, dev, pradeep
>> The IBM Power team is not idle in this area. There's ongoing work to
>> enable DTS on Power systems.
>
> Good to read there is some work in the pipe.
> I can remember the first emails (in 2015) talking about some automated
> tests for compilation and unit tests on IBM Power.
> We are still seeing some compilation issues regularly on Power.
> Before going to DTS, I think you should extend your compilation testing,
> and basic feature testing with builtin unit tests.
That's on my ToDo list. I'm currently investigating some errors from
app/test/test_barrier.c which fails on weakly ordered memory systems
such as Power. I have my eye on several other tests as well that
definitely need to be validated.
Dave
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
2019-04-10 21:03 ` David Christensen
@ 2019-04-10 21:03 ` David Christensen
0 siblings, 0 replies; 80+ messages in thread
From: David Christensen @ 2019-04-10 21:03 UTC (permalink / raw)
To: Thomas Monjalon; +Cc: Vivian Kong, dev, pradeep
>> The IBM Power team is not idle in this area. There's ongoing work to
>> enable DTS on Power systems.
>
> Good to read there is some work in the pipe.
> I can remember the first emails (in 2015) talking about some automated
> tests for compilation and unit tests on IBM Power.
> We are still seeing some compilation issues regularly on Power.
> Before going to DTS, I think you should extend your compilation testing,
> and basic feature testing with builtin unit tests.
That's on my ToDo list. I'm currently investigating some errors from
app/test/test_barrier.c which fails on weakly ordered memory systems
such as Power. I have my eye on several other tests as well that
definitely need to be validated.
Dave
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
2019-04-10 20:46 ` Thomas Monjalon
2019-04-10 20:46 ` Thomas Monjalon
2019-04-10 21:03 ` David Christensen
@ 2019-04-10 21:45 ` Pradeep Satyanarayana
2019-04-10 21:45 ` Pradeep Satyanarayana
2019-04-11 6:59 ` Thomas Monjalon
2 siblings, 2 replies; 80+ messages in thread
From: Pradeep Satyanarayana @ 2019-04-10 21:45 UTC (permalink / raw)
To: Thomas Monjalon; +Cc: dev, David Christensen, Vivian Kong, David Wilder
> > The IBM Power team is not idle in this area. There's ongoing work to
> > enable DTS on Power systems.
>
> Good to read there is some work in the pipe.
> I can remember the first emails (in 2015) talking about some automated
> tests for compilation and unit tests on IBM Power.
Thomas, Unfortunately we previously had some churn in the teams that worked
on DPDK
on Power. That had a downstream impact. We (Power) should be in better
shape than we
were in the past. For the last several weeks, we have been regularly
running a sub-set of
DTS with unit tests, sample applications and so on against the master
branch. We are also
periodically running these tests against several of the stable branches as
well.
> We are still seeing some compilation issues regularly on Power.
> Before going to DTS, I think you should extend your compilation testing,
> and basic feature testing with builtin unit tests.
We have not observed any compilation issues since we started the CI. The
last issue reported
was during 18.11-rc1 that Mellanox fixed. Hopefully, we should catch any
such regressions
quickly in the future, since we now have a CI that runs periodically.
On a different note, I will reach out to Vivian and the s390 team.
Thanks
Pradeep
pradeep@us.ibm.com
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
2019-04-10 21:45 ` Pradeep Satyanarayana
@ 2019-04-10 21:45 ` Pradeep Satyanarayana
2019-04-11 6:59 ` Thomas Monjalon
1 sibling, 0 replies; 80+ messages in thread
From: Pradeep Satyanarayana @ 2019-04-10 21:45 UTC (permalink / raw)
To: Thomas Monjalon; +Cc: dev, David Christensen, Vivian Kong, David Wilder
> > The IBM Power team is not idle in this area. There's ongoing work to
> > enable DTS on Power systems.
>
> Good to read there is some work in the pipe.
> I can remember the first emails (in 2015) talking about some automated
> tests for compilation and unit tests on IBM Power.
Thomas, Unfortunately we previously had some churn in the teams that worked
on DPDK
on Power. That had a downstream impact. We (Power) should be in better
shape than we
were in the past. For the last several weeks, we have been regularly
running a sub-set of
DTS with unit tests, sample applications and so on against the master
branch. We are also
periodically running these tests against several of the stable branches as
well.
> We are still seeing some compilation issues regularly on Power.
> Before going to DTS, I think you should extend your compilation testing,
> and basic feature testing with builtin unit tests.
We have not observed any compilation issues since we started the CI. The
last issue reported
was during 18.11-rc1 that Mellanox fixed. Hopefully, we should catch any
such regressions
quickly in the future, since we now have a CI that runs periodically.
On a different note, I will reach out to Vivian and the s390 team.
Thanks
Pradeep
pradeep@us.ibm.com
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
2019-04-10 21:45 ` Pradeep Satyanarayana
2019-04-10 21:45 ` Pradeep Satyanarayana
@ 2019-04-11 6:59 ` Thomas Monjalon
2019-04-11 6:59 ` Thomas Monjalon
` (2 more replies)
1 sibling, 3 replies; 80+ messages in thread
From: Thomas Monjalon @ 2019-04-11 6:59 UTC (permalink / raw)
To: Pradeep Satyanarayana; +Cc: dev, David Christensen, Vivian Kong, David Wilder
10/04/2019 23:45, Pradeep Satyanarayana:
>
> > > The IBM Power team is not idle in this area. There's ongoing work to
> > > enable DTS on Power systems.
> >
> > Good to read there is some work in the pipe.
> > I can remember the first emails (in 2015) talking about some automated
> > tests for compilation and unit tests on IBM Power.
>
> Thomas, Unfortunately we previously had some churn in the teams that worked
> on DPDK
> on Power. That had a downstream impact. We (Power) should be in better
> shape than we
> were in the past. For the last several weeks, we have been regularly
> running a sub-set of
> DTS with unit tests, sample applications and so on against the master
> branch. We are also
> periodically running these tests against several of the stable branches as
> well.
Good.
Next step will be to report some test result for each patchset submitted
on the mailing-list, so we can monitor the results from patchwork.
> > We are still seeing some compilation issues regularly on Power.
> > Before going to DTS, I think you should extend your compilation testing,
> > and basic feature testing with builtin unit tests.
>
> We have not observed any compilation issues since we started the CI. The
> last issue reported
> was during 18.11-rc1 that Mellanox fixed. Hopefully, we should catch any
> such regressions
> quickly in the future, since we now have a CI that runs periodically.
There are some failure when compiling with big endian toolchain.
It seems you are not testing big endian.
If you don't support big endian, please mention it in the doc.
> On a different note, I will reach out to Vivian and the s390 team.
Thank you
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
2019-04-11 6:59 ` Thomas Monjalon
@ 2019-04-11 6:59 ` Thomas Monjalon
2019-04-11 15:57 ` Pradeep Satyanarayana
[not found] ` <OFB9049735.7E51096E-ON882583D9.00574783-882583D9.00579FE2@LocalDomain>
2 siblings, 0 replies; 80+ messages in thread
From: Thomas Monjalon @ 2019-04-11 6:59 UTC (permalink / raw)
To: Pradeep Satyanarayana; +Cc: dev, David Christensen, Vivian Kong, David Wilder
10/04/2019 23:45, Pradeep Satyanarayana:
>
> > > The IBM Power team is not idle in this area. There's ongoing work to
> > > enable DTS on Power systems.
> >
> > Good to read there is some work in the pipe.
> > I can remember the first emails (in 2015) talking about some automated
> > tests for compilation and unit tests on IBM Power.
>
> Thomas, Unfortunately we previously had some churn in the teams that worked
> on DPDK
> on Power. That had a downstream impact. We (Power) should be in better
> shape than we
> were in the past. For the last several weeks, we have been regularly
> running a sub-set of
> DTS with unit tests, sample applications and so on against the master
> branch. We are also
> periodically running these tests against several of the stable branches as
> well.
Good.
Next step will be to report some test result for each patchset submitted
on the mailing-list, so we can monitor the results from patchwork.
> > We are still seeing some compilation issues regularly on Power.
> > Before going to DTS, I think you should extend your compilation testing,
> > and basic feature testing with builtin unit tests.
>
> We have not observed any compilation issues since we started the CI. The
> last issue reported
> was during 18.11-rc1 that Mellanox fixed. Hopefully, we should catch any
> such regressions
> quickly in the future, since we now have a CI that runs periodically.
There are some failure when compiling with big endian toolchain.
It seems you are not testing big endian.
If you don't support big endian, please mention it in the doc.
> On a different note, I will reach out to Vivian and the s390 team.
Thank you
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
2019-04-09 19:06 [dpdk-dev] [RFC 00/12] introduce s390x architecture Vivian Kong
` (13 preceding siblings ...)
2019-04-09 20:25 ` [dpdk-dev] [RFC 00/12] introduce s390x architecture Thomas Monjalon
@ 2019-04-11 7:45 ` David Marchand
2019-04-11 7:45 ` David Marchand
2019-05-15 12:45 ` David Marchand
2020-02-18 21:03 ` Thomas Monjalon
15 siblings, 2 replies; 80+ messages in thread
From: David Marchand @ 2019-04-11 7:45 UTC (permalink / raw)
To: vivkong; +Cc: dev
Hello,
On Tue, Apr 9, 2019 at 9:06 PM Vivian Kong <vivkong@gmail.com> wrote:
> To build and run DPDK on Linux on IBM Z (s390x), big endian support
> is added and s390x vector intrinics are used in the implementation
>
intrinsics*
of DPDK libraries.
>
> I appreciate your feedback.
>
Quick check since this is not 19.05 material.
- New files should be Copyright 2019.
- Avoid copy/paste from Power, noticed a reference to Power in the config
file.
- Configuration files are stacked, only enable/disable the needed parts in
the specific s390 file
- Meson must be added.
- No need to add dead code, remove the commented code like:
//#define dsb(opt) asm volatile("" : : : "memory")
- Comments using // are banned.
- No need to introduce a RTE_ACL_CLASSIFY_S390X to map to the scalar code.
Just avoid the SSE code to be selected in the build framework (iiuc).
- Avoid introducing empty lines
Run check scripts from devtools before submitting:
[dmarchan@dmarchan dpdk]$ ./devtools/checkpatches.sh
### mk: introduce s390x architecture
WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
author 'Vivian Kong <vivkong@gmail.com>'
total: 0 errors, 1 warnings, 61 lines checked
### eal: add support for s390x architecture
WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
author 'Vivian Kong <vivkong@gmail.com>'
total: 0 errors, 1 warnings, 601 lines checked
### acl: add support for s390x architecture
WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
author 'Vivian Kong <vivkong@gmail.com>'
total: 0 errors, 1 warnings, 208 lines checked
### lpm: add support for s390x architecture
WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
author 'Vivian Kong <vivkong@gmail.com>'
total: 0 errors, 1 warnings, 203 lines checked
### examples/l3fwd: add support for s390x architecture
WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
author 'Vivian Kong <vivkong@gmail.com>'
total: 0 errors, 1 warnings, 410 lines checked
### net/i40e: add support for s390x architecture
WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
author 'Vivian Kong <vivkong@gmail.com>'
total: 0 errors, 1 warnings, 0 checks, 647 lines checked
### test: add support for s390x architecture
WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
author 'Vivian Kong <vivkong@gmail.com>'
total: 0 errors, 1 warnings, 192 lines checked
### hash: add support for s390x architecture
WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
author 'Vivian Kong <vivkong@gmail.com>'
total: 0 errors, 1 warnings, 16 lines checked
### doc: introduce s390x architecture
WARNING:COMMIT_MESSAGE: Missing commit description - Add an appropriate one
WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
author 'Vivian Kong <vivkong@gmail.com>'
total: 0 errors, 2 warnings, 24 lines checked
### ethdev: add cast for bus_device
WARNING:COMMIT_MESSAGE: Missing commit description - Add an appropriate one
WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
author 'Vivian Kong <vivkong@gmail.com>'
total: 0 errors, 2 warnings, 8 lines checked
### mbuf: trivial fix
WARNING:COMMIT_MESSAGE: Missing commit description - Add an appropriate one
WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
author 'Vivian Kong <vivkong@gmail.com>'
total: 0 errors, 2 warnings, 8 lines checked
### test: miscellaneous test fixes
WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
author 'Vivian Kong <vivkong@gmail.com>'
total: 0 errors, 1 warnings, 32 lines checked
0/12 valid patch
--
David Marchand
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
2019-04-11 7:45 ` David Marchand
@ 2019-04-11 7:45 ` David Marchand
2019-05-15 12:45 ` David Marchand
1 sibling, 0 replies; 80+ messages in thread
From: David Marchand @ 2019-04-11 7:45 UTC (permalink / raw)
To: vivkong; +Cc: dev
Hello,
On Tue, Apr 9, 2019 at 9:06 PM Vivian Kong <vivkong@gmail.com> wrote:
> To build and run DPDK on Linux on IBM Z (s390x), big endian support
> is added and s390x vector intrinics are used in the implementation
>
intrinsics*
of DPDK libraries.
>
> I appreciate your feedback.
>
Quick check since this is not 19.05 material.
- New files should be Copyright 2019.
- Avoid copy/paste from Power, noticed a reference to Power in the config
file.
- Configuration files are stacked, only enable/disable the needed parts in
the specific s390 file
- Meson must be added.
- No need to add dead code, remove the commented code like:
//#define dsb(opt) asm volatile("" : : : "memory")
- Comments using // are banned.
- No need to introduce a RTE_ACL_CLASSIFY_S390X to map to the scalar code.
Just avoid the SSE code to be selected in the build framework (iiuc).
- Avoid introducing empty lines
Run check scripts from devtools before submitting:
[dmarchan@dmarchan dpdk]$ ./devtools/checkpatches.sh
### mk: introduce s390x architecture
WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
author 'Vivian Kong <vivkong@gmail.com>'
total: 0 errors, 1 warnings, 61 lines checked
### eal: add support for s390x architecture
WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
author 'Vivian Kong <vivkong@gmail.com>'
total: 0 errors, 1 warnings, 601 lines checked
### acl: add support for s390x architecture
WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
author 'Vivian Kong <vivkong@gmail.com>'
total: 0 errors, 1 warnings, 208 lines checked
### lpm: add support for s390x architecture
WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
author 'Vivian Kong <vivkong@gmail.com>'
total: 0 errors, 1 warnings, 203 lines checked
### examples/l3fwd: add support for s390x architecture
WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
author 'Vivian Kong <vivkong@gmail.com>'
total: 0 errors, 1 warnings, 410 lines checked
### net/i40e: add support for s390x architecture
WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
author 'Vivian Kong <vivkong@gmail.com>'
total: 0 errors, 1 warnings, 0 checks, 647 lines checked
### test: add support for s390x architecture
WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
author 'Vivian Kong <vivkong@gmail.com>'
total: 0 errors, 1 warnings, 192 lines checked
### hash: add support for s390x architecture
WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
author 'Vivian Kong <vivkong@gmail.com>'
total: 0 errors, 1 warnings, 16 lines checked
### doc: introduce s390x architecture
WARNING:COMMIT_MESSAGE: Missing commit description - Add an appropriate one
WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
author 'Vivian Kong <vivkong@gmail.com>'
total: 0 errors, 2 warnings, 24 lines checked
### ethdev: add cast for bus_device
WARNING:COMMIT_MESSAGE: Missing commit description - Add an appropriate one
WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
author 'Vivian Kong <vivkong@gmail.com>'
total: 0 errors, 2 warnings, 8 lines checked
### mbuf: trivial fix
WARNING:COMMIT_MESSAGE: Missing commit description - Add an appropriate one
WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
author 'Vivian Kong <vivkong@gmail.com>'
total: 0 errors, 2 warnings, 8 lines checked
### test: miscellaneous test fixes
WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
author 'Vivian Kong <vivkong@gmail.com>'
total: 0 errors, 1 warnings, 32 lines checked
0/12 valid patch
--
David Marchand
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
2019-04-11 6:59 ` Thomas Monjalon
2019-04-11 6:59 ` Thomas Monjalon
@ 2019-04-11 15:57 ` Pradeep Satyanarayana
2019-04-11 15:57 ` Pradeep Satyanarayana
[not found] ` <OFB9049735.7E51096E-ON882583D9.00574783-882583D9.00579FE2@LocalDomain>
2 siblings, 1 reply; 80+ messages in thread
From: Pradeep Satyanarayana @ 2019-04-11 15:57 UTC (permalink / raw)
To: Thomas Monjalon; +Cc: dev, David Christensen, Vivian Kong, David Wilder
> > > We are still seeing some compilation issues regularly on Power.
> > > Before going to DTS, I think you should extend your compilation
testing,
> > > and basic feature testing with builtin unit tests.
> >
> > We have not observed any compilation issues since we started the CI.
The
> > last issue reported
> > was during 18.11-rc1 that Mellanox fixed. Hopefully, we should catch
any
> > such regressions
> > quickly in the future, since we now have a CI that runs periodically.
>
> There are some failure when compiling with big endian toolchain.
> It seems you are not testing big endian.
Correct, we have been doing all our work on little endian only.
> If you don't support big endian, please mention it in the doc.
Thank you for alerting us about this. Good point that you bring up.
I will need some time to consult and figure out how we approach this.
Let me get back to you on this.
Thanks
Pradeep
pradeep@us.ibm.com
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
2019-04-11 15:57 ` Pradeep Satyanarayana
@ 2019-04-11 15:57 ` Pradeep Satyanarayana
0 siblings, 0 replies; 80+ messages in thread
From: Pradeep Satyanarayana @ 2019-04-11 15:57 UTC (permalink / raw)
To: Thomas Monjalon; +Cc: dev, David Christensen, Vivian Kong, David Wilder
> > > We are still seeing some compilation issues regularly on Power.
> > > Before going to DTS, I think you should extend your compilation
testing,
> > > and basic feature testing with builtin unit tests.
> >
> > We have not observed any compilation issues since we started the CI.
The
> > last issue reported
> > was during 18.11-rc1 that Mellanox fixed. Hopefully, we should catch
any
> > such regressions
> > quickly in the future, since we now have a CI that runs periodically.
>
> There are some failure when compiling with big endian toolchain.
> It seems you are not testing big endian.
Correct, we have been doing all our work on little endian only.
> If you don't support big endian, please mention it in the doc.
Thank you for alerting us about this. Good point that you bring up.
I will need some time to consult and figure out how we approach this.
Let me get back to you on this.
Thanks
Pradeep
pradeep@us.ibm.com
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 08/12] hash: add support for s390x architecture
2019-04-09 19:06 ` [dpdk-dev] [RFC 08/12] hash: " Vivian Kong
2019-04-09 19:06 ` Vivian Kong
@ 2019-04-15 20:43 ` Dharmik Thakkar
2019-04-15 20:43 ` Dharmik Thakkar
1 sibling, 1 reply; 80+ messages in thread
From: Dharmik Thakkar @ 2019-04-15 20:43 UTC (permalink / raw)
To: vivkong; +Cc: dev, nd
Hi,
Please find the inline comment.
> On Apr 9, 2019, at 2:06 PM, Vivian Kong <vivkong@gmail.com> wrote:
>
> Add big endian support for s390x architecture.
>
> Signed-off-by: Vivian Kong <vivkong@ca.ibm.com>
> ---
> lib/librte_hash/rte_fbk_hash.h | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/lib/librte_hash/rte_fbk_hash.h b/lib/librte_hash/rte_fbk_hash.h
> index c4d6976d2..5e49950a7 100644
> --- a/lib/librte_hash/rte_fbk_hash.h
> +++ b/lib/librte_hash/rte_fbk_hash.h
> @@ -125,9 +125,16 @@ rte_fbk_hash_add_key_with_bucket(struct rte_fbk_hash_table *ht,
> * corrupted due to race conditions, but it's still possible to
> * overwrite entries that have just been made valid.
> */
> + #if RTE_BYTE_ORDER == RTE_LITTLE_ENDIAN
> const uint64_t new_entry = ((uint64_t)(key) << 32) |
> ((uint64_t)(value) << 16) |
> 1; /* 1 = is_entry bit. */
> + #else
> + const uint64_t new_entry =
> + ((uint64_t)(1) << 48) | /* 1 = is_entry bit. */
((uint64_t)(1) << 56)?
> + ((uint64_t)(value) << 32) |
> + (uint64_t)(key);
> + #endif
> uint32_t i;
>
> for (i = 0; i < ht->entries_per_bucket; i++) {
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 08/12] hash: add support for s390x architecture
2019-04-15 20:43 ` Dharmik Thakkar
@ 2019-04-15 20:43 ` Dharmik Thakkar
0 siblings, 0 replies; 80+ messages in thread
From: Dharmik Thakkar @ 2019-04-15 20:43 UTC (permalink / raw)
To: vivkong; +Cc: dev, nd
Hi,
Please find the inline comment.
> On Apr 9, 2019, at 2:06 PM, Vivian Kong <vivkong@gmail.com> wrote:
>
> Add big endian support for s390x architecture.
>
> Signed-off-by: Vivian Kong <vivkong@ca.ibm.com>
> ---
> lib/librte_hash/rte_fbk_hash.h | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/lib/librte_hash/rte_fbk_hash.h b/lib/librte_hash/rte_fbk_hash.h
> index c4d6976d2..5e49950a7 100644
> --- a/lib/librte_hash/rte_fbk_hash.h
> +++ b/lib/librte_hash/rte_fbk_hash.h
> @@ -125,9 +125,16 @@ rte_fbk_hash_add_key_with_bucket(struct rte_fbk_hash_table *ht,
> * corrupted due to race conditions, but it's still possible to
> * overwrite entries that have just been made valid.
> */
> + #if RTE_BYTE_ORDER == RTE_LITTLE_ENDIAN
> const uint64_t new_entry = ((uint64_t)(key) << 32) |
> ((uint64_t)(value) << 16) |
> 1; /* 1 = is_entry bit. */
> + #else
> + const uint64_t new_entry =
> + ((uint64_t)(1) << 48) | /* 1 = is_entry bit. */
((uint64_t)(1) << 56)?
> + ((uint64_t)(value) << 32) |
> + (uint64_t)(key);
> + #endif
> uint32_t i;
>
> for (i = 0; i < ht->entries_per_bucket; i++) {
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
[not found] ` <OFB9049735.7E51096E-ON882583D9.00574783-882583D9.00579FE2@LocalDomain>
@ 2019-04-18 21:06 ` Pradeep Satyanarayana
2019-04-18 21:06 ` Pradeep Satyanarayana
2019-04-18 21:18 ` Thomas Monjalon
0 siblings, 2 replies; 80+ messages in thread
From: Pradeep Satyanarayana @ 2019-04-18 21:06 UTC (permalink / raw)
To: Thomas Monjalon
Cc: dev, David Christensen, Vivian Kong, David Wilder, Cindy Lee
Pradeep Satyanarayana/Beaverton/IBM wrote on 04/11/2019 08:57:05 AM:
> From: Pradeep Satyanarayana/Beaverton/IBM
> To: Thomas Monjalon <thomas@monjalon.net>
> Cc: dev@dpdk.org, David Christensen <drc@linux.vnet.ibm.com>, Vivian
> Kong <vivkong@ca.ibm.com>, David Wilder <wilder@us.ibm.com>
> Date: 04/11/2019 08:57 AM
> Subject: Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
>
>
> > > > We are still seeing some compilation issues regularly on Power.
> > > > Before going to DTS, I think you should extend your compilation
testing,
> > > > and basic feature testing with builtin unit tests.
> > >
> > > We have not observed any compilation issues since we started the CI.
The
> > > last issue reported
> > > was during 18.11-rc1 that Mellanox fixed. Hopefully, we should catch
any
> > > such regressions
> > > quickly in the future, since we now have a CI that runs periodically.
> >
> > There are some failure when compiling with big endian toolchain.
> > It seems you are not testing big endian.
>
> Correct, we have been doing all our work on little endian only.
>
> > If you don't support big endian, please mention it in the doc.
>
> Thank you for alerting us about this. Good point that you bring up.
> I will need some time to consult and figure out how we approach this.
> Let me get back to you on this.
On the Linux on Power front going forward, there are currently no plans to
support BE,
just LE.
The doc you mention above, is that this one?
https://doc.dpdk.org/guides/platform/index.html
Thanks
Pradeep
pradeep@us.ibm.com
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
2019-04-18 21:06 ` Pradeep Satyanarayana
@ 2019-04-18 21:06 ` Pradeep Satyanarayana
2019-04-18 21:18 ` Thomas Monjalon
1 sibling, 0 replies; 80+ messages in thread
From: Pradeep Satyanarayana @ 2019-04-18 21:06 UTC (permalink / raw)
To: Thomas Monjalon
Cc: dev, David Christensen, Vivian Kong, David Wilder, Cindy Lee
Pradeep Satyanarayana/Beaverton/IBM wrote on 04/11/2019 08:57:05 AM:
> From: Pradeep Satyanarayana/Beaverton/IBM
> To: Thomas Monjalon <thomas@monjalon.net>
> Cc: dev@dpdk.org, David Christensen <drc@linux.vnet.ibm.com>, Vivian
> Kong <vivkong@ca.ibm.com>, David Wilder <wilder@us.ibm.com>
> Date: 04/11/2019 08:57 AM
> Subject: Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
>
>
> > > > We are still seeing some compilation issues regularly on Power.
> > > > Before going to DTS, I think you should extend your compilation
testing,
> > > > and basic feature testing with builtin unit tests.
> > >
> > > We have not observed any compilation issues since we started the CI.
The
> > > last issue reported
> > > was during 18.11-rc1 that Mellanox fixed. Hopefully, we should catch
any
> > > such regressions
> > > quickly in the future, since we now have a CI that runs periodically.
> >
> > There are some failure when compiling with big endian toolchain.
> > It seems you are not testing big endian.
>
> Correct, we have been doing all our work on little endian only.
>
> > If you don't support big endian, please mention it in the doc.
>
> Thank you for alerting us about this. Good point that you bring up.
> I will need some time to consult and figure out how we approach this.
> Let me get back to you on this.
On the Linux on Power front going forward, there are currently no plans to
support BE,
just LE.
The doc you mention above, is that this one?
https://doc.dpdk.org/guides/platform/index.html
Thanks
Pradeep
pradeep@us.ibm.com
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
2019-04-18 21:06 ` Pradeep Satyanarayana
2019-04-18 21:06 ` Pradeep Satyanarayana
@ 2019-04-18 21:18 ` Thomas Monjalon
2019-04-18 21:18 ` Thomas Monjalon
1 sibling, 1 reply; 80+ messages in thread
From: Thomas Monjalon @ 2019-04-18 21:18 UTC (permalink / raw)
To: Pradeep Satyanarayana
Cc: dev, David Christensen, Vivian Kong, David Wilder, Cindy Lee
18/04/2019 23:06, Pradeep Satyanarayana:
>
> Pradeep Satyanarayana/Beaverton/IBM wrote on 04/11/2019 08:57:05 AM:
>
> > From: Pradeep Satyanarayana/Beaverton/IBM
> > To: Thomas Monjalon <thomas@monjalon.net>
> > Cc: dev@dpdk.org, David Christensen <drc@linux.vnet.ibm.com>, Vivian
> > Kong <vivkong@ca.ibm.com>, David Wilder <wilder@us.ibm.com>
> > Date: 04/11/2019 08:57 AM
> > Subject: Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
> >
> >
> > > > > We are still seeing some compilation issues regularly on Power.
> > > > > Before going to DTS, I think you should extend your compilation
> testing,
> > > > > and basic feature testing with builtin unit tests.
> > > >
> > > > We have not observed any compilation issues since we started the CI.
> The
> > > > last issue reported
> > > > was during 18.11-rc1 that Mellanox fixed. Hopefully, we should catch
> any
> > > > such regressions
> > > > quickly in the future, since we now have a CI that runs periodically.
> > >
> > > There are some failure when compiling with big endian toolchain.
> > > It seems you are not testing big endian.
> >
> > Correct, we have been doing all our work on little endian only.
> >
> > > If you don't support big endian, please mention it in the doc.
> >
> > Thank you for alerting us about this. Good point that you bring up.
> > I will need some time to consult and figure out how we approach this.
> > Let me get back to you on this.
>
> On the Linux on Power front going forward, there are currently no plans to
> support BE,
> just LE.
>
> The doc you mention above, is that this one?
>
> https://doc.dpdk.org/guides/platform/index.html
Yes, thank you.
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
2019-04-18 21:18 ` Thomas Monjalon
@ 2019-04-18 21:18 ` Thomas Monjalon
0 siblings, 0 replies; 80+ messages in thread
From: Thomas Monjalon @ 2019-04-18 21:18 UTC (permalink / raw)
To: Pradeep Satyanarayana
Cc: dev, David Christensen, Vivian Kong, David Wilder, Cindy Lee
18/04/2019 23:06, Pradeep Satyanarayana:
>
> Pradeep Satyanarayana/Beaverton/IBM wrote on 04/11/2019 08:57:05 AM:
>
> > From: Pradeep Satyanarayana/Beaverton/IBM
> > To: Thomas Monjalon <thomas@monjalon.net>
> > Cc: dev@dpdk.org, David Christensen <drc@linux.vnet.ibm.com>, Vivian
> > Kong <vivkong@ca.ibm.com>, David Wilder <wilder@us.ibm.com>
> > Date: 04/11/2019 08:57 AM
> > Subject: Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
> >
> >
> > > > > We are still seeing some compilation issues regularly on Power.
> > > > > Before going to DTS, I think you should extend your compilation
> testing,
> > > > > and basic feature testing with builtin unit tests.
> > > >
> > > > We have not observed any compilation issues since we started the CI.
> The
> > > > last issue reported
> > > > was during 18.11-rc1 that Mellanox fixed. Hopefully, we should catch
> any
> > > > such regressions
> > > > quickly in the future, since we now have a CI that runs periodically.
> > >
> > > There are some failure when compiling with big endian toolchain.
> > > It seems you are not testing big endian.
> >
> > Correct, we have been doing all our work on little endian only.
> >
> > > If you don't support big endian, please mention it in the doc.
> >
> > Thank you for alerting us about this. Good point that you bring up.
> > I will need some time to consult and figure out how we approach this.
> > Let me get back to you on this.
>
> On the Linux on Power front going forward, there are currently no plans to
> support BE,
> just LE.
>
> The doc you mention above, is that this one?
>
> https://doc.dpdk.org/guides/platform/index.html
Yes, thank you.
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
2019-04-11 7:45 ` David Marchand
2019-04-11 7:45 ` David Marchand
@ 2019-05-15 12:45 ` David Marchand
2019-05-15 12:45 ` David Marchand
1 sibling, 1 reply; 80+ messages in thread
From: David Marchand @ 2019-05-15 12:45 UTC (permalink / raw)
To: vivkong; +Cc: dev
Hello,
On Thu, Apr 11, 2019 at 9:45 AM David Marchand <david.marchand@redhat.com>
wrote:
> Hello,
>
> On Tue, Apr 9, 2019 at 9:06 PM Vivian Kong <vivkong@gmail.com> wrote:
>
>> To build and run DPDK on Linux on IBM Z (s390x), big endian support
>> is added and s390x vector intrinics are used in the implementation
>>
>
> intrinsics*
>
> of DPDK libraries.
>>
>> I appreciate your feedback.
>>
>
> Quick check since this is not 19.05 material.
>
> - New files should be Copyright 2019.
> - Avoid copy/paste from Power, noticed a reference to Power in the config
> file.
> - Configuration files are stacked, only enable/disable the needed parts in
> the specific s390 file
> - Meson must be added.
> - No need to add dead code, remove the commented code like:
> //#define dsb(opt) asm volatile("" : : : "memory")
> - Comments using // are banned.
> - No need to introduce a RTE_ACL_CLASSIFY_S390X to map to the scalar code.
> Just avoid the SSE code to be selected in the build framework (iiuc).
> - Avoid introducing empty lines
>
>
> Run check scripts from devtools before submitting:
>
> [dmarchan@dmarchan dpdk]$ ./devtools/checkpatches.sh
>
> ### mk: introduce s390x architecture
>
> WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
> author 'Vivian Kong <vivkong@gmail.com>'
>
> total: 0 errors, 1 warnings, 61 lines checked
>
> ### eal: add support for s390x architecture
>
> WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
> author 'Vivian Kong <vivkong@gmail.com>'
>
> total: 0 errors, 1 warnings, 601 lines checked
>
> ### acl: add support for s390x architecture
>
> WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
> author 'Vivian Kong <vivkong@gmail.com>'
>
> total: 0 errors, 1 warnings, 208 lines checked
>
> ### lpm: add support for s390x architecture
>
> WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
> author 'Vivian Kong <vivkong@gmail.com>'
>
> total: 0 errors, 1 warnings, 203 lines checked
>
> ### examples/l3fwd: add support for s390x architecture
>
> WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
> author 'Vivian Kong <vivkong@gmail.com>'
>
> total: 0 errors, 1 warnings, 410 lines checked
>
> ### net/i40e: add support for s390x architecture
>
> WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
> author 'Vivian Kong <vivkong@gmail.com>'
>
> total: 0 errors, 1 warnings, 0 checks, 647 lines checked
>
> ### test: add support for s390x architecture
>
> WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
> author 'Vivian Kong <vivkong@gmail.com>'
>
> total: 0 errors, 1 warnings, 192 lines checked
>
> ### hash: add support for s390x architecture
>
> WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
> author 'Vivian Kong <vivkong@gmail.com>'
>
> total: 0 errors, 1 warnings, 16 lines checked
>
> ### doc: introduce s390x architecture
>
> WARNING:COMMIT_MESSAGE: Missing commit description - Add an appropriate one
>
> WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
> author 'Vivian Kong <vivkong@gmail.com>'
>
> total: 0 errors, 2 warnings, 24 lines checked
>
> ### ethdev: add cast for bus_device
>
> WARNING:COMMIT_MESSAGE: Missing commit description - Add an appropriate one
>
> WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
> author 'Vivian Kong <vivkong@gmail.com>'
>
> total: 0 errors, 2 warnings, 8 lines checked
>
> ### mbuf: trivial fix
>
> WARNING:COMMIT_MESSAGE: Missing commit description - Add an appropriate one
>
> WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
> author 'Vivian Kong <vivkong@gmail.com>'
>
> total: 0 errors, 2 warnings, 8 lines checked
>
> ### test: miscellaneous test fixes
>
> WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
> author 'Vivian Kong <vivkong@gmail.com>'
>
> total: 0 errors, 1 warnings, 32 lines checked
>
> 0/12 valid patch
>
We are now post 19.05.
This is the right time to propose new features/architectures.
If you want to post a new series, please take into account the previous
comments.
Thanks.
--
David Marchand
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
2019-05-15 12:45 ` David Marchand
@ 2019-05-15 12:45 ` David Marchand
0 siblings, 0 replies; 80+ messages in thread
From: David Marchand @ 2019-05-15 12:45 UTC (permalink / raw)
To: vivkong; +Cc: dev
Hello,
On Thu, Apr 11, 2019 at 9:45 AM David Marchand <david.marchand@redhat.com>
wrote:
> Hello,
>
> On Tue, Apr 9, 2019 at 9:06 PM Vivian Kong <vivkong@gmail.com> wrote:
>
>> To build and run DPDK on Linux on IBM Z (s390x), big endian support
>> is added and s390x vector intrinics are used in the implementation
>>
>
> intrinsics*
>
> of DPDK libraries.
>>
>> I appreciate your feedback.
>>
>
> Quick check since this is not 19.05 material.
>
> - New files should be Copyright 2019.
> - Avoid copy/paste from Power, noticed a reference to Power in the config
> file.
> - Configuration files are stacked, only enable/disable the needed parts in
> the specific s390 file
> - Meson must be added.
> - No need to add dead code, remove the commented code like:
> //#define dsb(opt) asm volatile("" : : : "memory")
> - Comments using // are banned.
> - No need to introduce a RTE_ACL_CLASSIFY_S390X to map to the scalar code.
> Just avoid the SSE code to be selected in the build framework (iiuc).
> - Avoid introducing empty lines
>
>
> Run check scripts from devtools before submitting:
>
> [dmarchan@dmarchan dpdk]$ ./devtools/checkpatches.sh
>
> ### mk: introduce s390x architecture
>
> WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
> author 'Vivian Kong <vivkong@gmail.com>'
>
> total: 0 errors, 1 warnings, 61 lines checked
>
> ### eal: add support for s390x architecture
>
> WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
> author 'Vivian Kong <vivkong@gmail.com>'
>
> total: 0 errors, 1 warnings, 601 lines checked
>
> ### acl: add support for s390x architecture
>
> WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
> author 'Vivian Kong <vivkong@gmail.com>'
>
> total: 0 errors, 1 warnings, 208 lines checked
>
> ### lpm: add support for s390x architecture
>
> WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
> author 'Vivian Kong <vivkong@gmail.com>'
>
> total: 0 errors, 1 warnings, 203 lines checked
>
> ### examples/l3fwd: add support for s390x architecture
>
> WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
> author 'Vivian Kong <vivkong@gmail.com>'
>
> total: 0 errors, 1 warnings, 410 lines checked
>
> ### net/i40e: add support for s390x architecture
>
> WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
> author 'Vivian Kong <vivkong@gmail.com>'
>
> total: 0 errors, 1 warnings, 0 checks, 647 lines checked
>
> ### test: add support for s390x architecture
>
> WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
> author 'Vivian Kong <vivkong@gmail.com>'
>
> total: 0 errors, 1 warnings, 192 lines checked
>
> ### hash: add support for s390x architecture
>
> WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
> author 'Vivian Kong <vivkong@gmail.com>'
>
> total: 0 errors, 1 warnings, 16 lines checked
>
> ### doc: introduce s390x architecture
>
> WARNING:COMMIT_MESSAGE: Missing commit description - Add an appropriate one
>
> WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
> author 'Vivian Kong <vivkong@gmail.com>'
>
> total: 0 errors, 2 warnings, 24 lines checked
>
> ### ethdev: add cast for bus_device
>
> WARNING:COMMIT_MESSAGE: Missing commit description - Add an appropriate one
>
> WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
> author 'Vivian Kong <vivkong@gmail.com>'
>
> total: 0 errors, 2 warnings, 8 lines checked
>
> ### mbuf: trivial fix
>
> WARNING:COMMIT_MESSAGE: Missing commit description - Add an appropriate one
>
> WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
> author 'Vivian Kong <vivkong@gmail.com>'
>
> total: 0 errors, 2 warnings, 8 lines checked
>
> ### test: miscellaneous test fixes
>
> WARNING:NO_AUTHOR_SIGN_OFF: Missing Signed-off-by: line by nominal patch
> author 'Vivian Kong <vivkong@gmail.com>'
>
> total: 0 errors, 1 warnings, 32 lines checked
>
> 0/12 valid patch
>
We are now post 19.05.
This is the right time to propose new features/architectures.
If you want to post a new series, please take into account the previous
comments.
Thanks.
--
David Marchand
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
2019-04-09 19:06 [dpdk-dev] [RFC 00/12] introduce s390x architecture Vivian Kong
` (14 preceding siblings ...)
2019-04-11 7:45 ` David Marchand
@ 2020-02-18 21:03 ` Thomas Monjalon
2020-02-20 0:20 ` Pradeep Satyanarayana
2020-02-21 13:33 ` Vivian Kong
15 siblings, 2 replies; 80+ messages in thread
From: Thomas Monjalon @ 2020-02-18 21:03 UTC (permalink / raw)
To: Vivian Kong; +Cc: dev, Pradeep Satyanarayana, David Christensen, David Wilder
Hi,
09/04/2019 21:06, Vivian Kong:
> To build and run DPDK on Linux on IBM Z (s390x), big endian support
> is added and s390x vector intrinics are used in the implementation
> of DPDK libraries.
What is the status of this work?
Is it abandoned?
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
2020-02-18 21:03 ` Thomas Monjalon
@ 2020-02-20 0:20 ` Pradeep Satyanarayana
2020-02-21 13:33 ` Vivian Kong
1 sibling, 0 replies; 80+ messages in thread
From: Pradeep Satyanarayana @ 2020-02-20 0:20 UTC (permalink / raw)
To: Thomas Monjalon; +Cc: dev, David Christensen, Vivian Kong, David Wilder
Thomas Monjalon <thomas@monjalon.net> wrote on 02/18/2020 01:03:27 PM:
> From: Thomas Monjalon <thomas@monjalon.net>
> To: Vivian Kong <vivkong@ca.ibm.com>
> Cc: dev@dpdk.org, Pradeep Satyanarayana <pradeep@us.ibm.com>, David
> Christensen <drc@linux.vnet.ibm.com>, David Wilder <wilder@us.ibm.com>
> Date: 02/18/2020 01:03 PM
> Subject: [EXTERNAL] Re: [dpdk-dev] [RFC 00/12] introduce s390x
architecture
>
> Hi,
>
> 09/04/2019 21:06, Vivian Kong:
> > To build and run DPDK on Linux on IBM Z (s390x), big endian support
> > is added and s390x vector intrinics are used in the implementation
> > of DPDK libraries.
>
> What is the status of this work?
> Is it abandoned?
Thomas, Our team is not associated with this effort. Let me reach out to
Vivian and
request her to respond.
Thanks
Pradeep
pradeep@us.ibm.com
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
2020-02-18 21:03 ` Thomas Monjalon
2020-02-20 0:20 ` Pradeep Satyanarayana
@ 2020-02-21 13:33 ` Vivian Kong
2021-03-24 21:40 ` Thomas Monjalon
1 sibling, 1 reply; 80+ messages in thread
From: Vivian Kong @ 2020-02-21 13:33 UTC (permalink / raw)
To: Thomas Monjalon
Cc: dev, David Christensen, Pradeep Satyanarayana, David Wilder
Sorry for the delayed reply.
We are working on updating the port to a newer version. We'd like to ask
for feedback when it's ready.
Regards,
Vivian Kong
Linux on IBM Z Open Source Ecosystem
IBM Canada Toronto Lab
Thomas Monjalon <thomas@monjalon.net> wrote on 2020/02/18 04:03:27 PM:
> From: Thomas Monjalon <thomas@monjalon.net>
> To: Vivian Kong <vivkong@ca.ibm.com>
> Cc: dev@dpdk.org, Pradeep Satyanarayana <pradeep@us.ibm.com>, David
> Christensen <drc@linux.vnet.ibm.com>, David Wilder <wilder@us.ibm.com>
> Date: 2020/02/18 04:03 PM
> Subject: [EXTERNAL] Re: [dpdk-dev] [RFC 00/12] introduce s390x
architecture
>
> Hi,
>
> 09/04/2019 21:06, Vivian Kong:
> > To build and run DPDK on Linux on IBM Z (s390x), big endian support
> > is added and s390x vector intrinics are used in the implementation
> > of DPDK libraries.
>
> What is the status of this work?
> Is it abandoned?
>
>
^ permalink raw reply [flat|nested] 80+ messages in thread
* Re: [dpdk-dev] [RFC 00/12] introduce s390x architecture
2020-02-21 13:33 ` Vivian Kong
@ 2021-03-24 21:40 ` Thomas Monjalon
0 siblings, 0 replies; 80+ messages in thread
From: Thomas Monjalon @ 2021-03-24 21:40 UTC (permalink / raw)
To: Vivian Kong
Cc: dev, David Christensen, Pradeep Satyanarayana, David Wilder,
david.marchand
Hi,
Same question as last year.
I guess we can consider this work abandoned?
21/02/2020 14:33, Vivian Kong:
> Sorry for the delayed reply.
>
> We are working on updating the port to a newer version. We'd like to ask
> for feedback when it's ready.
>
> Regards,
>
> Vivian Kong
> Linux on IBM Z Open Source Ecosystem
> IBM Canada Toronto Lab
>
> Thomas Monjalon <thomas@monjalon.net> wrote on 2020/02/18 04:03:27 PM:
>
> > From: Thomas Monjalon <thomas@monjalon.net>
> > To: Vivian Kong <vivkong@ca.ibm.com>
> > Cc: dev@dpdk.org, Pradeep Satyanarayana <pradeep@us.ibm.com>, David
> > Christensen <drc@linux.vnet.ibm.com>, David Wilder <wilder@us.ibm.com>
> > Date: 2020/02/18 04:03 PM
> > Subject: [EXTERNAL] Re: [dpdk-dev] [RFC 00/12] introduce s390x
> architecture
> >
> > Hi,
> >
> > 09/04/2019 21:06, Vivian Kong:
> > > To build and run DPDK on Linux on IBM Z (s390x), big endian support
> > > is added and s390x vector intrinics are used in the implementation
> > > of DPDK libraries.
> >
> > What is the status of this work?
> > Is it abandoned?
^ permalink raw reply [flat|nested] 80+ messages in thread
end of thread, other threads:[~2021-03-24 21:40 UTC | newest]
Thread overview: 80+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-04-09 19:06 [dpdk-dev] [RFC 00/12] introduce s390x architecture Vivian Kong
2019-04-09 19:06 ` Vivian Kong
2019-04-09 19:06 ` [dpdk-dev] [RFC 01/12] mk: " Vivian Kong
2019-04-09 19:06 ` Vivian Kong
2019-04-09 19:38 ` Luca Boccassi
2019-04-09 19:38 ` Luca Boccassi
2019-04-10 16:50 ` Vivian Kong
2019-04-10 16:50 ` Vivian Kong
2019-04-09 19:06 ` [dpdk-dev] [RFC 02/12] eal: add support for " Vivian Kong
2019-04-09 19:06 ` Vivian Kong
2019-04-09 19:06 ` [dpdk-dev] [RFC 03/12] acl: " Vivian Kong
2019-04-09 19:06 ` Vivian Kong
2019-04-09 19:06 ` [dpdk-dev] [RFC 04/12] lpm: " Vivian Kong
2019-04-09 19:06 ` Vivian Kong
2019-04-09 19:06 ` [dpdk-dev] [RFC 05/12] examples/l3fwd: " Vivian Kong
2019-04-09 19:06 ` Vivian Kong
2019-04-09 19:06 ` [dpdk-dev] [RFC 06/12] net/i40e: " Vivian Kong
2019-04-09 19:06 ` Vivian Kong
2019-04-09 19:06 ` [dpdk-dev] [RFC 07/12] test: " Vivian Kong
2019-04-09 19:06 ` Vivian Kong
2019-04-09 19:06 ` [dpdk-dev] [RFC 08/12] hash: " Vivian Kong
2019-04-09 19:06 ` Vivian Kong
2019-04-15 20:43 ` Dharmik Thakkar
2019-04-15 20:43 ` Dharmik Thakkar
2019-04-09 19:06 ` [dpdk-dev] [RFC 09/12] doc: introduce " Vivian Kong
2019-04-09 19:06 ` Vivian Kong
2019-04-09 20:12 ` Thomas Monjalon
2019-04-09 20:12 ` Thomas Monjalon
2019-04-10 16:52 ` Vivian Kong
2019-04-10 16:52 ` Vivian Kong
2019-04-09 19:06 ` [dpdk-dev] [RFC 10/12] ethdev: add cast for bus_device Vivian Kong
2019-04-09 19:06 ` Vivian Kong
2019-04-09 20:14 ` Thomas Monjalon
2019-04-09 20:14 ` Thomas Monjalon
2019-04-10 2:41 ` Stephen Hemminger
2019-04-10 2:41 ` Stephen Hemminger
2019-04-10 17:10 ` Vivian Kong
2019-04-10 17:10 ` Vivian Kong
2019-04-09 19:06 ` [dpdk-dev] [RFC 11/12] mbuf: trivial fix Vivian Kong
2019-04-09 19:06 ` Vivian Kong
2019-04-09 20:13 ` Thomas Monjalon
2019-04-09 20:13 ` Thomas Monjalon
2019-04-09 19:06 ` [dpdk-dev] [RFC 12/12] test: miscellaneous test fixes Vivian Kong
2019-04-09 19:06 ` Vivian Kong
2019-04-09 20:25 ` [dpdk-dev] [RFC 00/12] introduce s390x architecture Thomas Monjalon
2019-04-09 20:25 ` Thomas Monjalon
2019-04-10 17:09 ` Vivian Kong
2019-04-10 17:09 ` Vivian Kong
2019-04-10 17:43 ` Thomas Monjalon
2019-04-10 17:43 ` Thomas Monjalon
2019-04-10 19:15 ` Vivian Kong
2019-04-10 19:15 ` Vivian Kong
2019-04-10 19:46 ` Thomas Monjalon
2019-04-10 19:46 ` Thomas Monjalon
2019-04-10 20:45 ` Vivian Kong
2019-04-10 20:45 ` Vivian Kong
2019-04-10 20:31 ` David Christensen
2019-04-10 20:31 ` David Christensen
2019-04-10 20:46 ` Thomas Monjalon
2019-04-10 20:46 ` Thomas Monjalon
2019-04-10 21:03 ` David Christensen
2019-04-10 21:03 ` David Christensen
2019-04-10 21:45 ` Pradeep Satyanarayana
2019-04-10 21:45 ` Pradeep Satyanarayana
2019-04-11 6:59 ` Thomas Monjalon
2019-04-11 6:59 ` Thomas Monjalon
2019-04-11 15:57 ` Pradeep Satyanarayana
2019-04-11 15:57 ` Pradeep Satyanarayana
[not found] ` <OFB9049735.7E51096E-ON882583D9.00574783-882583D9.00579FE2@LocalDomain>
2019-04-18 21:06 ` Pradeep Satyanarayana
2019-04-18 21:06 ` Pradeep Satyanarayana
2019-04-18 21:18 ` Thomas Monjalon
2019-04-18 21:18 ` Thomas Monjalon
2019-04-11 7:45 ` David Marchand
2019-04-11 7:45 ` David Marchand
2019-05-15 12:45 ` David Marchand
2019-05-15 12:45 ` David Marchand
2020-02-18 21:03 ` Thomas Monjalon
2020-02-20 0:20 ` Pradeep Satyanarayana
2020-02-21 13:33 ` Vivian Kong
2021-03-24 21:40 ` Thomas Monjalon
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).